Results 1 to 15 of 15

Thread: Hand Held radio holder for Jeep? What works?

  1. #1
    Join Date
    Sep 2006
    Location
    Mesa
    Posts
    3,147

    Hand Held radio holder for Jeep? What works?

    I have a small Baofeng handheld radio. Typically I put it in one of the two cup holder spaces I have. Not the best when there is a passenger with a refreshment. Any thoughts on what might be a good alternative? I have a horizontal roll bar at dash level I could use for attaching something. I did a bit of looking for holsters, cup holders and such that attach to a roll bar. There are a lot of options, many are for vertical roll bars. I have vertical roll bars from front to back just above my head between me and the passenger as well.

    Or I could get a roll bar cup holder and use that for the passenger's drink. Anyone have one of these? How do they work out?
    82 Cherokee WT SOA/SF/high steer/Alcan springs/agr box/Borgeson steering shaft/AMC 401/performer/holley TA/HEI/BeCool/727/ALTAS (2.0/2.72/5.44)/D60 Snofighter(Yukon Zip,hubs,stubs,4.56)/14 Bolt (FF,BF shave, Discs, ARB,Artec Truss)/MTR 37X12.5/Corbeau Moab Seats/RCI 6point Harness/Hella Aux lights/tuffy console/killer32 sliders/custom bumpers and roll bar/WARN 8000/steering brace/CO2 Tank/CB/dual batts/custom TC skid plate

  2. #2
    Join Date
    Dec 2003
    Location
    Phoenix
    Posts
    1,887

    Re: Hand Held radio holder for Jeep? What works?

    Rugged Radios has these...

    Image 5-6-18 at 12.52 PM
    RIP The Tetanus Shot

  3. #3
    Join Date
    Sep 2006
    Location
    Mesa
    Posts
    3,147

    Re: Hand Held radio holder for Jeep? What works?

    That might be the ticket. But I can't find them on the site. Do you have a name or part number or something? I searched a bit on their site with no luck.
    82 Cherokee WT SOA/SF/high steer/Alcan springs/agr box/Borgeson steering shaft/AMC 401/performer/holley TA/HEI/BeCool/727/ALTAS (2.0/2.72/5.44)/D60 Snofighter(Yukon Zip,hubs,stubs,4.56)/14 Bolt (FF,BF shave, Discs, ARB,Artec Truss)/MTR 37X12.5/Corbeau Moab Seats/RCI 6point Harness/Hella Aux lights/tuffy console/killer32 sliders/custom bumpers and roll bar/WARN 8000/steering brace/CO2 Tank/CB/dual batts/custom TC skid plate

  4. #4
    Join Date
    Jul 2004
    Location
    Gilbert, AZ
    Posts
    48

    Re: Hand Held radio holder for Jeep? What works?

    This what I have used since I already have many RAM attachments
    https://www.ebay.com/itm/Universal-M...gAAOSw9GhYYcOg

  5. #5
    Join Date
    Dec 2003
    Location
    Phoenix
    Posts
    1,887

    Re: Hand Held radio holder for Jeep? What works?

    Quote Originally Posted by Will E View Post
    That might be the ticket. But I can't find them on the site. Do you have a name or part number or something? I searched a bit on their site with no luck.
    Screen Shot 2018-05-06 at 6.26.45 PM
    RIP The Tetanus Shot

  6. #6
    Join Date
    Mar 2010
    Location
    Goldfield
    Posts
    1,523

    Re: Hand Held radio holder for Jeep? What works?

    Can't find the ones I ordered, but here is something that looks pretty similar. I just bungee them to the cage with some small loop and ball bungees.

    Sorry, the link I posted didn't work, but here is the information

    Amazon - abcGoodefg 3 in1 Multi-Function Radio Holder Holster Case Pouch Bag For GPS Kenwood Yaesu Icom Motorola baofeng Two Way Radio
    by abcGoodefg
    $7.99
    Last edited by Tortured Metal; 05-07-2018 at 02:16 PM.
    Burn it and beat on it

  7. #7
    Join Date
    Nov 2010
    Location
    Ahwatukee
    Posts
    5,976

    Re: Hand Held radio holder for Jeep? What works?

    I like the ideas, Thanks!

  8. #8
    Join Date
    Nov 2012
    Location
    Chandler/Gilbert
    Posts
    935

    Re: Hand Held radio holder for Jeep? What works?

    I use a 12oz beer coozy and punch 2 holes in it and zip tie it to the O-Shoot handle on the passenger side.

  9. #9

    Re: Hand Held radio holder for Jeep? What works?

    https://www.google.com/search?q=baof...bih=1268&dpr=2

    If you have the remote mic ($7), then you can hide the radio and wear the mic on your shirt or lay it wherever.
    Carlos Alvarez
    2015 copper pearl JKU Rubicon
    KG7EQI

  10. #10
    Join Date
    Nov 2011
    Location
    Tempe
    Posts
    2,778

    Re: Hand Held radio holder for Jeep? What works?

    Here is what I use. Just buy the correct tube clamp size and it works like a champ. Just mount it anywhere on your cage.

    https://axiaalloys.com/product/handh...baofeng-uv-5r/
    Eric - *2004 Wrangler TJ, Coilovers, 2 Speed Atlas, 37" Pitbull Rockers
    *'08 Silver Rubicon JKU 2.5" lift, 5.13's and 35's

  11. #11
    Join Date
    May 2011
    Location
    South Mountain
    Posts
    9,926

    Re: Hand Held radio holder for Jeep? What works?

    I use a $9 suction cup cell phone holder and have one semi-loose zip tie around the whole thing to keep it from bouncing out. I have an external antenna and mic though.
    '93 YJ, 4.0, NV4500, Atlas, 35s
    '17 WK2, 5.7, ZF8HP70, NV245, 31s

  12. #12
    Join Date
    Jan 2012
    Location
    Buckeye, Az.
    Posts
    7,912

    Re: Hand Held radio holder for Jeep? What works?

    This is what I use. Obviously not as good the other options listed, but it works.

    https://www.quadratec.com/products/1...BoCOWAQAvD_BwE
    Non-College Educated Working Class White Deplorable....

  13. #13
    Join Date
    May 2013
    Location
    Central Phoenix
    Posts
    542

    Re: Hand Held radio holder for Jeep? What works?

    This post inspired me and I saw these on Rugged's site: https://www.ruggedradios.com/index.p...oducts_id=1735

    Will fit perfectly on my square tube tablet mount bar.

  14. #14
    Join Date
    Sep 2006
    Location
    Mesa
    Posts
    3,147

    Re: Hand Held radio holder for Jeep? What works?

    I am going to give this a try:

    https://www.amazon.com/dp/B073Q2TY1H...ing=UTF8&psc=1

    It's made for cell phones but my radio is about the same weight. I just ordered it today. I'll post up on how it work after I go wheeling.
    82 Cherokee WT SOA/SF/high steer/Alcan springs/agr box/Borgeson steering shaft/AMC 401/performer/holley TA/HEI/BeCool/727/ALTAS (2.0/2.72/5.44)/D60 Snofighter(Yukon Zip,hubs,stubs,4.56)/14 Bolt (FF,BF shave, Discs, ARB,Artec Truss)/MTR 37X12.5/Corbeau Moab Seats/RCI 6point Harness/Hella Aux lights/tuffy console/killer32 sliders/custom bumpers and roll bar/WARN 8000/steering brace/CO2 Tank/CB/dual batts/custom TC skid plate

  15. #15
    Join Date
    Jul 2005
    Location
    Verde Valley, Az
    Posts
    371

    Re: Hand Held radio holder for Jeep? What works?

    I found this on Expo portal, made in Tucson, $10. Mounted in my FSJ, works fine. I put it where the ash tray was, simple plate mount.
    https://www.expeditionportal.com/for...ackets.121298/
    I start what I finish!

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Holder held in contempt of Congress
    By CAMartino in forum Firearms Forum
    Replies: 2
    Last Post: 06-28-2012, 11:10 PM
  2. Hand held CB radio
    By Oceannites in forum General Discussion
    Replies: 12
    Last Post: 06-05-2010, 11:26 AM
  3. Hand Held CB Radios???
    By mytjrox in forum General Discussion
    Replies: 19
    Last Post: 04-01-2010, 10:07 PM
  4. hand held GPS for fun
    By rockwerks in forum Wanted
    Replies: 4
    Last Post: 03-30-2008, 02:18 PM
  5. Hand held CB
    By Bilt4Comfort in forum General Discussion
    Replies: 7
    Last Post: 12-29-2007, 12:24 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •