Results 1 to 3 of 3

Thread: Help wanted... tj dana 35 bearing and seal

  1. #1
    Join Date
    Jan 2013
    Location
    Glendale/Phoenix
    Posts
    40

    Help wanted... tj dana 35 bearing and seal

    Need to replace my rear bearing driver side tomorrow and I am in a hurry. Usually I YouTube these issues and try to suffer thru it. I have to drive back to Flagstaff for my job Sunday at 1 and need to get some help. I have tools except for a slide hammer. Any help would be excellent. Going to be working tomorrow as soon as I can grab the parts hopefully the 24 hr autozone has them. I'm located off 39th ave and Pinnacle Peak.

  2. #2
    Join Date
    Jun 2007
    Location
    Mesa, AZ
    Posts
    2,806

    Re: Help wanted... tj dana 35 bearing and seal

    All you need to replace that bearing is 13mm or 1/2" socket to take the diff cover off, a 1/4" 12 point wrench to take the center pin of the differential out, and a pry bar or large flat blade screw driver to pop the axle seal out. Then the bearing should just come out by hand, no slide hammer needed.
    I'ma cookin' somethin' up!

  3. #3
    Join Date
    Jan 2013
    Location
    Glendale/Phoenix
    Posts
    40

    Re: Help wanted... tj dana 35 bearing and seal

    Quote Originally Posted by TanTJJim View Post
    All you need to replace that bearing is 13mm or 1/2" socket to take the diff cover off, a 1/4" 12 point wrench to take the center pin of the differential out, and a pry bar or large flat blade screw driver to pop the axle seal out. Then the bearing should just come out by hand, no slide hammer needed.
    Thank you!

    Sent from my SM-G955U using Tapatalk

Thread Information

Users Browsing this Thread

There are currently 2 users browsing this thread. (0 members and 2 guests)

Similar Threads

  1. Replies: 3
    Last Post: 02-20-2012, 06:00 PM
  2. Dana44 pinon seal and bearing replacement. +Noise ID.
    By CaptainMorgan in forum General Discussion
    Replies: 4
    Last Post: 10-20-2009, 11:56 AM
  3. dana 30 seal replacment
    By rg_arizona in forum Wrenching Party
    Replies: 8
    Last Post: 03-04-2009, 07:05 PM
  4. WANTED Big Bearing D44 spindle.... I need it
    By jeff krause in forum Wanted
    Replies: 2
    Last Post: 01-24-2007, 06:44 AM
  5. Dana 44 Pinion Bearing
    By Spongebob in forum General Discussion
    Replies: 7
    Last Post: 08-26-2006, 02:16 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •