PDA

View Full Version : In-cab winch controller

Stu Olson
10-16-2005, 03:33 PM
Great looking control panel and functions as advertised.....

http://www.stu-offroad.com/recovery/incab/incab-1.htm


http://www.stu-offroad.com/recovery/incab/incab-18.jpg
Triple-XJ
10-16-2005, 04:55 PM
Nice quality write-up Stu.

My lord, were do you ever find the room for more gizmos on your jeep. :rolleyes: :)
Antman
10-16-2005, 05:17 PM
Once again Stu, a great write up and the 12 volt guy has some beat stuff.:D
Stu Olson
10-16-2005, 05:43 PM
Thanks Geno....it is becoming more of a challenge to find available space. ;)


Bill, I agree....that guy has a lot of nice products. If I was doing a restoration or a build up from scratch, I could see myself leaving some $$ in his pocket before the project was complete.
Devil Man
10-16-2005, 10:28 PM
Great looking control panel and functions as advertised.....

http://www.stu-offroad.com/recovery/incab/incab-1.htm


http://www.stu-offroad.com/recovery/incab/incab-18.jpg
thanks Stu i was thing of doing this to my rig it will not look as cool as yours :D
Brian Blum
10-16-2005, 11:30 PM
what happened to the Kwan Motorsystems Throttle Winch Control (http://www.stu-offroad.com/recovery/twc/twc-1.htm)?
k7mto
10-17-2005, 12:11 AM
That's apparently the white cable as in...

"Pay no attention to the white cable in the upper right corner of the picture as it has nothing to do with this project."

Looks like it's still connected so he can use either?
rockwerks
10-17-2005, 08:09 AM
Darren is a great guy ships quick and you get what you order. I have a like panel sitting waiting to be installed but it also includes 2 air switches for arb controls. I will take a pic and post later. Darren is Seabass on Pirates Bulliten board.
Stu Olson
10-17-2005, 09:27 AM
Matt is correct, it is still there, alive and well. ;)
twstdtj
10-18-2005, 06:24 AM
thanks Stu i was thing of doing this to my rig it will not look as cool as yours :D


But it will go nicely with you shiney dash.:D :D
rockwerks
10-19-2005, 07:05 PM
http://fototime.com/%7B6FF47306-B5CE-4B59-9B31-686342520AEF%7D/picture.JPG

here is the panel from 12volt guy Im putting in the 01 2 arb pneumatic switches and the incab controler. He does nice stuff
Stu Olson
10-21-2005, 06:46 PM
That is a good looking panel too! That should certainly do the job. ;)