blooddrive
01-03-2004, 10:59 AM
18145-18169
18145 From: Jesus Chio - Alloffroad.com <jchio@a...>
Date: Wed Jan 31, 2001 3:43pm
Subject: Re: Front Axle
I thought he wanted a D44 3/4, I think that year both D44 and D60 were on
the trucks.
Jesus Chio
Chief Editor
http://www.alloffroad.com
Free webpages:
http://signup.alloffroad.com
----- Original Message -----
From: "ERIC C MARBLE" <EMarble3@p...>
To: <az_vjc@yahoogroups.com>; "JEEP THANG" <jeep_thang@h...>; "Jesus
Chio - Alloffroad.com" <jchio@a...>
Sent: Wednesday, January 31, 2001 5:36 PM
Subject: Re: [az_vjc] Front Axle
> Randy has 1 @ $1850.00 complete.
> Driven Auto # is 602-269-3969
>
>
>
>
>
>
>
>
>
>
> ----- Original Message ----
>
>
>
> From: "Jesus Chio - Alloffroad.com" <jchio@a...>
> To: <az_vjc@yahoogroups.com>; "JEEP THANG" <jeep_thang@h...>
> Sent: Wednesday, January 31, 2001 4:26 PM
> Subject: Re: [az_vjc] Front Axle
>
>
> > I have one that could sell you for $350 but I guess shipping would be
> > killer.
> >
> > Call Randy at drivenautoparts.com
> >
> >
> > Jesus Chio
> > Chief Editor
> > http://www.alloffroad.com
> >
> > Free webpages:
> > http://signup.alloffroad.com
> >
> >
> >
> >
> > ----- Original Message -----
> > From: "JEEP THANG" <jeep_thang@h...>
> > To: <az_vjc@yahoogroups.com>
> > Sent: Wednesday, January 31, 2001 5:09 PM
> > Subject: [az_vjc] Front Axle
> >
> >
> > > anyone know where to get a front axle from a 79 F-250.
> > > I know this is stupid but for relatively cheap?
> > >
> > > Sincerely: Larry George
> > > JEEP THANG
> > >
> > >
> > >
> > >
> > >
> >
> >
> >
> >
> >
> >
>
>
--------------------------------------------------------------------------------
ADVERTISEMENT
18146 From: <SkanDreadheart@a...>
Date: Wed Jan 31, 2001 10:40am
Subject: Re: Front Axle
Stop e-mailing me.
18147 From: Greg Stapley <love24wheel@h...>
Date: Wed Jan 31, 2001 3:48pm
Subject: Upper termiator run on Sunday
I have a run on the trips but I did not see it get distributed to the groupd so:
Upper terminator run on sunday at 10:00 A.M.
at the usual meeting spot.
Just thought one or two of you would like to know...TIA
Late
Greg
--------------------------------------------------------------------------------
Get your FREE download of MSN Explorer at http://explorer.msn.com
18148 From: blake shepherd <blake@b...>
Date: Wed Jan 31, 2001 4:05pm
Subject: warn winch remote control
This might be a long shot, but does anyone have an extra remote laying
around? I have the old style 8274 with four prongs on the connector.
Someone stole mine so I need a replacement.
TIA
Blake
80cj5
18149 From: JEEP THANG <jeep_thang@h...>
Date: Wed Jan 31, 2001 3:41pm
Subject: Author Column Fix for those with the troubles.
To get your name in the Author Column instead of your E-mail address,
you have to:
1. Go into Account Information (Top Right of Screen)
2. You will see the Yahoo ID card, in the grey column on the right
you will see Edit/ Create Profiles (Click It)
3. Then you will see a Yellow set of Boxes/Strip with your Yahoo ID,
next to that you will see an Edit Link (click It)
4. It will come up with your profile information, if you do not have
your Name in it, it will display your e-mail address, If your Name is
not present click on the (Edit Profile Information) link. Put your
information in and then click finished and your next post should have
your Name instead of your E-mail.
Hope this helps.
Sincerely: Larry George
JEEP THANG
18150 From: AzVJC Website <azvjc@a...>
Date: Wed Jan 31, 2001 4:38pm
Subject: [TR] Lake Pleasant to Crown King - Monday, February 5, 2001
Hello All,
This is an automated message from the website, please do not reply to it!
blake shepherd is leading a Lake Pleasant to Crown King trail run on Monday, February 5, 2001.
When: around 9 am
Where: Meet at the turn off for Lake Pleasant &; carefree.
Rating: 3.0
Length: All day
CB Channel: 4
Yes this is on a monday. My girlfriend has the day off and has never been to crown king. Plus there should still be some snow left.
The Lake Pleasang to Crown King trail is a local favorite. On any given weekend, there will be numerous groups of four wheelers, ATV's and motorcycles heading to and from Crown King.
The trail takes off from the Castle Hotsprings Rd and travels through the foot hills and up the side of the mountain, giving nice views of Lake Pleasant and the Valley. There are some tougher optional sections that can make it interesting.
The trail goes through the old ghost towns of Fort Misery and Oro Belle, both of which are remnants of the Mining era of the Bradshaw Mountains. All that remains now, are foundations and a few crumbling walls. Fort Misery makes a nice place to stop and eat lunch as the small creek usually has running water and there are trees to provide shade.
In the winter months, the trail from Fort Misery through Oro Belle to Crown King will often have snow and/or ice. In the summer, an early start is necessary to stay ahead of the rising temperatures.
Once on top of the mountain, the trail runs through the cool pines and into Crown King. In Crown King there are places to eat and have a drink, and a general store that sells some excellent fudge.
There are campgrounds on top of the mountain near Crown King for those wishing to stay overnight. The fastest way down is via the main road which leads through Cleator and toward Bumble Bee. You can split off and go through Cordes Junction, which will get you to the Freeway quicker, or keep going strait and go through the little town of Bumble Bee.
Alternatively, you can take the Senator Highway toward Prescott or Mayer, this can be a very interesting trail during snow season. If you have the time, follow Towers Mountain rd through Crown King and up to the top of Towers Mountain, there are some excellent views and you can join back up with the Senator Highway afterward.
Have fun, remember to bring water and your camera.
Enjoy, and remember to TREAD Lightly!
Click Here To Add Your Name to the List or For More Information
Thank You,
- The AzVJC Website
18151 From: Matt Barker <azjeeps@q...>
Date: Wed Jan 31, 2001 4:50pm
Subject: RE: Firestick Bracket
Try www.firestik.com. You should be able to find what you're looking for -
then give them a call and you can either order it from them or they will
tell you where you can get it locally. I've found that ordering from them
saves money and you get it quick.
Matt B.
94 YJ
http://azjeeps.offroadhq.net
Arizona Virtual Jeep Club
-----Original Message-----
From: Mike Baney [mailto:jeepin_in_az@y...]
Sent: Wednesday, January 31, 2001 2:22 PM
To: Jeep List
Subject: [az_vjc] Firestick Bracket
Does anyone know where I can get the bracket for a
firestick that bolts on to my tailgate? I thought I
saw it on the net somewhere, but can't remember.
Thanks,
Mike Baney
=====
2001 TJ
__________________________________________________
Get personalized email addresses from Yahoo! Mail - only $35
a year! http://personal.mail.yahoo.com/
18152 From: allenjakob <allenjakob@u...>
Date: Wed Jan 31, 2001 5:05pm
Subject: Non Jeep For Sale
Hey all.
I have a GBC 26" roll laminator for sale (industrial model). It has
about a half roll of laminate on it (about 50' of 3mil lam) has a
small ding in one roller which does not hamper performance. Variable
speed drive. Great for those Topos, other maps, news clippings or
whatever. I thought I would give everyone in the club first dibs on it
before I sell it somewhere else. Over $2,000.00 new, lookin for about
$300.00 for this one. Daddy needs Jeep stuff. :)
Check it out @:
<a href="http://albums.photopoint.com/j/AlbumIndex?u=996021&a=11315246">
See my photos of GBC Laminator at PhotoPoint</a>
Thanks,
Allen
97 TJ Sahara
18153 From: DougB <azjeep@h...>
Date: Wed Jan 31, 2001 5:10pm
Subject: Re: Need a shop for my gear swap.
4 Wheeler Supply on E. Washington, in Phoenix.
----- Original Message -----
From: <martinida@a...>
To: <az_vjc@yahoogroups.com>
Sent: Wednesday, January 31, 2001 6:12 AM
Subject: [az_vjc] Need a shop for my gear swap.
> Can someone suggest a shop in Chandler/Mesa/Gilbert for me to get the
> gears swapped on my TJ? Anyone have a discount code I could use as
> well? Any help is appreciated. Martin
>
>
>
>
18154 From: Joe W <arizonajeep@h...>
Date: Wed Jan 31, 2001 5:25pm
Subject: I Want (Was:RE: Table Mesa run question)
I want:
A new NV4500 Transmission, RE's new Long Arm kit. A belly up skid plate, new 37" Swampers (5), Dana 60's front and rear, a Dodge V-10 Motor...
-----Original Message-----
From: SkanDreadheart@aol.com [mailto:SkanDreadheart@aol.com]
Sent: Wednesday, January 31, 2001 4:23 PM
To: James.Towle@asu.edu; az_vjc@yahoogroups.com
Subject: Re: [az_vjc] Table Mesa run question
I want off this list
18155 From: Jon Loveless <jonloveless@m...>
Date: Wed Jan 31, 2001 5:36pm
Subject: Re: Digest Number 580
You need to un subscribe using the your own email address. Send an email to:
az_vjc-unsubscribe@eGroups.com
eGroups got purchased, so iuf that doesn't work, try:
az_vjc-unsubscribe@Yahoogroups.com
Jon
At 11:48 PM 1/31/2001 +0000, you wrote:
Date: Wed, 31 Jan 2001 18:40:18 EST
From: SkanDreadheart@aol.com
Subject: Re: Front Axle
Stop e-mailing me.
18156 From: <jonloveless@m...>
Date: Wed Jan 31, 2001 5:39pm
Subject: decals
I am completely out of AZVJC decals. If you ordered any within the
last day or 2 please be patient until the new supply arrives.
Chris Lewis, please call me about the decals 480-816-6240
Thanks.
Jon
18157 From: Ray B. <kb7skv@c...>
Date: Wed Jan 31, 2001 6:57pm
Subject: Re: I Want (Was:RE: Table Mesa run question)
me too, only make it an atlas II and an soa, and a pair of custom longspline driveshafts (no chrome please) and.....
Joe W wrote:
I want:A new NV4500 Transmission, RE's new Long Arm kit. A belly up skid plate, new 37" Swampers (5), Dana 60's front and rear, a Dodge V-10 Motor...
-----Original Message-----
From: SkanDreadheart@aol.com [mailto:SkanDreadheart@aol.com]
Sent: Wednesday, January 31, 2001 4:23 PM
To: James.Towle@asu.edu; az_vjc@yahoogroups.com
Subject: Re: [az_vjc] Table Mesa run question
I want off this list
--
...---===Ray===---...
http://www.sixfigureincome.com/?841576
18158 From: Chris Krieg <rv6a@m...>
Date: Wed Jan 31, 2001 5:48pm
Subject: Re: I Want (Was:RE: Table Mesa run question)
I want:
Peace and harmony throughout the land...... or all the cool parts off Joe's Jeep (including the NV4500 if Joe ever gets it).
Chris K
From: "Joe W"
Reply-To:
Date: Wed, 31 Jan 2001 18:25:06 -0700
To: , ,
Subject: I Want (Was:RE: [az_vjc] Table Mesa run question)
I want:
A new NV4500 Transmission, RE's new Long Arm kit. A belly up skid plate, new 37" Swampers (5), Dana 60's front and rear, a Dodge V-10 Motor...
-----Original Message-----
From: SkanDreadheart@aol.com [mailto:SkanDreadheart@aol.com]
Sent: Wednesday, January 31, 2001 4:23 PM
To: James.Towle@asu.edu; az_vjc@yahoogroups.com
Subject: Re: [az_vjc] Table Mesa run question
I want off this list
18159 From: Greg Stapley <love24wheel@h...>
Date: Wed Jan 31, 2001 6:48pm
Subject: Joke
One day, a man walked into the produce section of his local
supermarket and asked to buy half a head of lettuce. The
boy working in that department told him that they only sold
whole heads of lettuce. The man was insistent that the boy
ask his manager about the matter.
Walking into the back room, the boy said to his manager,
"Some jerk out there wants to buy only half a head of
lettuce." As he finished his sentence, he turned to find
the man standing right behind him, so he added, "And this
gentleman wants to buy the other half."
The manager approved the deal and the man went on his way.
Later the manager found the boy and said "I was impressed
with the way you got yourself out of that situation
earlier. We like people who think on their feet here. Where
are you from, son?"
"Minnesota, sir," the boy replied.
"Well, why did you leave Minnesota," the manager asked.
The boy said, "Sir, there's nothing but whores and hockey
players up there."
"Really!" said the manager. "My wife is from Minnesota!"
The boy replied, "No kidding? What team did she play for?"
--------------------------------------------------------------------------------
Get your FREE download of MSN Explorer at http://explorer.msn.com
18160 From: KHD1972 <KHD1972@m...>
Date: Wed Jan 31, 2001 7:08pm
Subject: Body, Spring, and Motor Lift
Hey Everybody,
I'm hoping to do some lifting on my YJ in the near future and am in need of some parts and info.
Anybody know where I can get some good used spring packs to do an add-a-leaf front lift and 3/4 eliptical set-up?
Also wondering the best manufacturer for a 1" body lift, as well as a 1" poly-urethane motor mount lift/ poly-urethane tranny mount. Are Performance Accessories products any good? And of course, who's got the best deal?
TIA
Keirvan
KHD1972@msn.com
'95 YJ
18161 From: linda luik <minihummer@w...>
Date: Wed Jan 31, 2001 6:59pm
Subject: Thanks!! front diff guards -- again!
Thanks all! The 4xDoctor site was the one I was looking for.
Linda
18162 From: Greg Stapley <love24wheel@h...>
Date: Wed Jan 31, 2001 7:51pm
Subject: Tires for sale
Attatched are some pics of the tires, they are off stock 95 YJ
225 75 15
they are in good shape, need cleaned though...asking $125 for five of them
If anybody is interested just give me an e-mail and we can set it up from there.
Greg
--------------------------------------------------------------------------------
Get your FREE download of MSN Explorer at http://explorer.msn.com
Attachment: (image/pjpeg) jeep.jpg [not stored]
Attachment: (image/pjpeg) thread.jpg [not stored]
18163 From: Kevin <nau88xj@h...>
Date: Wed Jan 31, 2001 8:11pm
Subject: WTB CJ
does anybody have a cj, or know of a cj for sale that is not being sold by
some shady guy that has painted over the rust on the frame and has a
straight 6 engine and has just been taken care of?????? I found one and it
got away and i am pissed at myself about that one now....anybody?
thanks,
kevin
18164 From: chiena <chiena@e...>
Date: Wed Jan 31, 2001 8:43pm
Subject: Re: where to buy a driveshaft
I've had some bad experience with AA driveline ( Gloeco ). I've Dealt with
oscar and yes he's good to deal with until their's a problem. Short story-
They built me 3 yes three drives shafts before I finally got one that was
close to being balanced. Took it to Dick's in phoenix to have him check it
out and found out it had 2 yes Two flat spots and was slightly bent. So Dick
straightened it out and reballanced it and it works fine. Went back to talk
to oscar for the cost of reballance and he told me I should have brought it
back to him. After several attemps to reballance, does he actually think on
more try will do it.....He still owe's me $40.00 for getting it ballanced at
Dick's and the price difference from the original rockcrawler shaft to a
regular replacement that I ended up getting......I know I'll never get it..
This is my experience, other's may have had better or worse......you
decide.....
----- Original Message -----
From: "Matt Ulepic" <mulepic@h...>
To: "Az_Vjc@Egroups.Com" <az_vjc@yahoogroups.com>
Sent: Wednesday, January 31, 2001 11:52 AM
Subject: [az_vjc] where to buy a driveshaft
> Hi all,
> Can I get some opinions/experiences on where to purchase a front
driveshaft?
> I complete a SOA on FSJ and the driveshaft came up short.
> Thanks,
> Matt
>
>
>
18165 From: ebnhils <ebnhils@e...>
Date: Wed Jan 31, 2001 8:57pm
Subject: Re: Body, Spring, and Motor Lift
I like the 1" body lift that replaces the old mounts from Daystar. This way you get all new mounts plus the body lift. I have these on my YJ, I also have the 1" poly motor mounts from Currie that I got from Rubicon and the Teraflex Belly-Up skid plate. You will probly get the best price from Toybox Off Road.
As for the springs you can get some from the people that have the Jeep yard sale in Glendale there number is 602-548-6348 ask for John or Robert. I would recommend that you put rear springs on the front this is the same as adding a leaf without having to tear the spring pack apart.
As for the tranny mount I think that Performance Accessories is the way to go they seem to have good products but I have not used them yet.
Eben
92 YJ SOA
----- Original Message -----
From: KHD1972
To: az_vjc@yahoogroups.com
Sent: Wednesday, January 31, 2001 8:08 PM
Subject: [az_vjc] Body, Spring, and Motor Lift
Hey Everybody,
I'm hoping to do some lifting on my YJ in the near future and am in need of some parts and info.
Anybody know where I can get some good used spring packs to do an add-a-leaf front lift and 3/4 eliptical set-up?
Also wondering the best manufacturer for a 1" body lift, as well as a 1" poly-urethane motor mount lift/ poly-urethane tranny mount. Are Performance Accessories products any good? And of course, who's got the best deal?
TIA
Keirvan
KHD1972@msn.com
'95 YJ
18166 From: <FLEXYXJ@a...>
Date: Wed Jan 31, 2001 3:52pm
Subject: Wheels for sale...CHEAP!!
Well I finally got my Centerline Tel-Star wheels today so.....I have 2 sets
of wheels availble for sale....CHEAP
The set that was on my XJ...15x8 eagle alloy, 5 on 4.5 bolt pattern, one is
rough (beat straight from upper terminator run!!!) will polish up nice, they
are dinged but....:) Make me an offer...
complete set of 15x10 centerline Tel-star wheels, 5 on 4.5 bolt pattern, once
again dinged but VERY useable...oh yeah both are 4.25" backspace...
My wife has accused me of collecting wheels so they have to go..also have set
of STOCK Xj wheels and 94 ZJ limited wheels if anyone interested....
THANX.......FLEXYXJ@aol.com
18167 From: Dan Coley <mt_b@y...>
Date: Wed Jan 31, 2001 8:59pm
Subject: Re: Author Column Fix for those with the troubles.
Test post.
--- In az_vjc@y..., "JEEP THANG" <jeep_thang@h...> wrote:
> To get your name in the Author Column instead of your E-mail
address,
> you have to:
>
> 1. Go into Account Information (Top Right of Screen)
> 2. You will see the Yahoo ID card, in the grey column on the
right
> you will see Edit/ Create Profiles (Click It)
> 3. Then you will see a Yellow set of Boxes/Strip with your Yahoo
ID,
> next to that you will see an Edit Link (click It)
> 4. It will come up with your profile information, if you do not
have
> your Name in it, it will display your e-mail address, If your Name
is
> not present click on the (Edit Profile Information) link. Put your
> information in and then click finished and your next post should
have
> your Name instead of your E-mail.
>
> Hope this helps.
>
> Sincerely: Larry George
> JEEP THANG
18168 From: T.J. Nosmo-King <ice626@h...>
Date: Wed Jan 31, 2001 9:48pm
Subject: Re: Updated III FS
the site lists about a thousand different rims....who makes them???
__________________________________________________ _______________
Get your FREE download of MSN Explorer at http://explorer.msn.com
18169 From: Scott Kruize <osmtj@y...>
Date: Wed Jan 31, 2001 10:30pm
Subject: Re: Front Axle
If you want to unsubscribe from the list you need to send an email to the following address:
az_vjc-unsubscribe@yahoogroups.com
Later,
Scott
SkanDreadheart@aol.com wrote:
Stop e-mailing me.
--------------------------------------------------------------------------------
Do You Yahoo!?
- Get personalized email addresses from Yahoo! Mail Personal Address - only $35 a year!
18145 From: Jesus Chio - Alloffroad.com <jchio@a...>
Date: Wed Jan 31, 2001 3:43pm
Subject: Re: Front Axle
I thought he wanted a D44 3/4, I think that year both D44 and D60 were on
the trucks.
Jesus Chio
Chief Editor
http://www.alloffroad.com
Free webpages:
http://signup.alloffroad.com
----- Original Message -----
From: "ERIC C MARBLE" <EMarble3@p...>
To: <az_vjc@yahoogroups.com>; "JEEP THANG" <jeep_thang@h...>; "Jesus
Chio - Alloffroad.com" <jchio@a...>
Sent: Wednesday, January 31, 2001 5:36 PM
Subject: Re: [az_vjc] Front Axle
> Randy has 1 @ $1850.00 complete.
> Driven Auto # is 602-269-3969
>
>
>
>
>
>
>
>
>
>
> ----- Original Message ----
>
>
>
> From: "Jesus Chio - Alloffroad.com" <jchio@a...>
> To: <az_vjc@yahoogroups.com>; "JEEP THANG" <jeep_thang@h...>
> Sent: Wednesday, January 31, 2001 4:26 PM
> Subject: Re: [az_vjc] Front Axle
>
>
> > I have one that could sell you for $350 but I guess shipping would be
> > killer.
> >
> > Call Randy at drivenautoparts.com
> >
> >
> > Jesus Chio
> > Chief Editor
> > http://www.alloffroad.com
> >
> > Free webpages:
> > http://signup.alloffroad.com
> >
> >
> >
> >
> > ----- Original Message -----
> > From: "JEEP THANG" <jeep_thang@h...>
> > To: <az_vjc@yahoogroups.com>
> > Sent: Wednesday, January 31, 2001 5:09 PM
> > Subject: [az_vjc] Front Axle
> >
> >
> > > anyone know where to get a front axle from a 79 F-250.
> > > I know this is stupid but for relatively cheap?
> > >
> > > Sincerely: Larry George
> > > JEEP THANG
> > >
> > >
> > >
> > >
> > >
> >
> >
> >
> >
> >
> >
>
>
--------------------------------------------------------------------------------
ADVERTISEMENT
18146 From: <SkanDreadheart@a...>
Date: Wed Jan 31, 2001 10:40am
Subject: Re: Front Axle
Stop e-mailing me.
18147 From: Greg Stapley <love24wheel@h...>
Date: Wed Jan 31, 2001 3:48pm
Subject: Upper termiator run on Sunday
I have a run on the trips but I did not see it get distributed to the groupd so:
Upper terminator run on sunday at 10:00 A.M.
at the usual meeting spot.
Just thought one or two of you would like to know...TIA
Late
Greg
--------------------------------------------------------------------------------
Get your FREE download of MSN Explorer at http://explorer.msn.com
18148 From: blake shepherd <blake@b...>
Date: Wed Jan 31, 2001 4:05pm
Subject: warn winch remote control
This might be a long shot, but does anyone have an extra remote laying
around? I have the old style 8274 with four prongs on the connector.
Someone stole mine so I need a replacement.
TIA
Blake
80cj5
18149 From: JEEP THANG <jeep_thang@h...>
Date: Wed Jan 31, 2001 3:41pm
Subject: Author Column Fix for those with the troubles.
To get your name in the Author Column instead of your E-mail address,
you have to:
1. Go into Account Information (Top Right of Screen)
2. You will see the Yahoo ID card, in the grey column on the right
you will see Edit/ Create Profiles (Click It)
3. Then you will see a Yellow set of Boxes/Strip with your Yahoo ID,
next to that you will see an Edit Link (click It)
4. It will come up with your profile information, if you do not have
your Name in it, it will display your e-mail address, If your Name is
not present click on the (Edit Profile Information) link. Put your
information in and then click finished and your next post should have
your Name instead of your E-mail.
Hope this helps.
Sincerely: Larry George
JEEP THANG
18150 From: AzVJC Website <azvjc@a...>
Date: Wed Jan 31, 2001 4:38pm
Subject: [TR] Lake Pleasant to Crown King - Monday, February 5, 2001
Hello All,
This is an automated message from the website, please do not reply to it!
blake shepherd is leading a Lake Pleasant to Crown King trail run on Monday, February 5, 2001.
When: around 9 am
Where: Meet at the turn off for Lake Pleasant &; carefree.
Rating: 3.0
Length: All day
CB Channel: 4
Yes this is on a monday. My girlfriend has the day off and has never been to crown king. Plus there should still be some snow left.
The Lake Pleasang to Crown King trail is a local favorite. On any given weekend, there will be numerous groups of four wheelers, ATV's and motorcycles heading to and from Crown King.
The trail takes off from the Castle Hotsprings Rd and travels through the foot hills and up the side of the mountain, giving nice views of Lake Pleasant and the Valley. There are some tougher optional sections that can make it interesting.
The trail goes through the old ghost towns of Fort Misery and Oro Belle, both of which are remnants of the Mining era of the Bradshaw Mountains. All that remains now, are foundations and a few crumbling walls. Fort Misery makes a nice place to stop and eat lunch as the small creek usually has running water and there are trees to provide shade.
In the winter months, the trail from Fort Misery through Oro Belle to Crown King will often have snow and/or ice. In the summer, an early start is necessary to stay ahead of the rising temperatures.
Once on top of the mountain, the trail runs through the cool pines and into Crown King. In Crown King there are places to eat and have a drink, and a general store that sells some excellent fudge.
There are campgrounds on top of the mountain near Crown King for those wishing to stay overnight. The fastest way down is via the main road which leads through Cleator and toward Bumble Bee. You can split off and go through Cordes Junction, which will get you to the Freeway quicker, or keep going strait and go through the little town of Bumble Bee.
Alternatively, you can take the Senator Highway toward Prescott or Mayer, this can be a very interesting trail during snow season. If you have the time, follow Towers Mountain rd through Crown King and up to the top of Towers Mountain, there are some excellent views and you can join back up with the Senator Highway afterward.
Have fun, remember to bring water and your camera.
Enjoy, and remember to TREAD Lightly!
Click Here To Add Your Name to the List or For More Information
Thank You,
- The AzVJC Website
18151 From: Matt Barker <azjeeps@q...>
Date: Wed Jan 31, 2001 4:50pm
Subject: RE: Firestick Bracket
Try www.firestik.com. You should be able to find what you're looking for -
then give them a call and you can either order it from them or they will
tell you where you can get it locally. I've found that ordering from them
saves money and you get it quick.
Matt B.
94 YJ
http://azjeeps.offroadhq.net
Arizona Virtual Jeep Club
-----Original Message-----
From: Mike Baney [mailto:jeepin_in_az@y...]
Sent: Wednesday, January 31, 2001 2:22 PM
To: Jeep List
Subject: [az_vjc] Firestick Bracket
Does anyone know where I can get the bracket for a
firestick that bolts on to my tailgate? I thought I
saw it on the net somewhere, but can't remember.
Thanks,
Mike Baney
=====
2001 TJ
__________________________________________________
Get personalized email addresses from Yahoo! Mail - only $35
a year! http://personal.mail.yahoo.com/
18152 From: allenjakob <allenjakob@u...>
Date: Wed Jan 31, 2001 5:05pm
Subject: Non Jeep For Sale
Hey all.
I have a GBC 26" roll laminator for sale (industrial model). It has
about a half roll of laminate on it (about 50' of 3mil lam) has a
small ding in one roller which does not hamper performance. Variable
speed drive. Great for those Topos, other maps, news clippings or
whatever. I thought I would give everyone in the club first dibs on it
before I sell it somewhere else. Over $2,000.00 new, lookin for about
$300.00 for this one. Daddy needs Jeep stuff. :)
Check it out @:
<a href="http://albums.photopoint.com/j/AlbumIndex?u=996021&a=11315246">
See my photos of GBC Laminator at PhotoPoint</a>
Thanks,
Allen
97 TJ Sahara
18153 From: DougB <azjeep@h...>
Date: Wed Jan 31, 2001 5:10pm
Subject: Re: Need a shop for my gear swap.
4 Wheeler Supply on E. Washington, in Phoenix.
----- Original Message -----
From: <martinida@a...>
To: <az_vjc@yahoogroups.com>
Sent: Wednesday, January 31, 2001 6:12 AM
Subject: [az_vjc] Need a shop for my gear swap.
> Can someone suggest a shop in Chandler/Mesa/Gilbert for me to get the
> gears swapped on my TJ? Anyone have a discount code I could use as
> well? Any help is appreciated. Martin
>
>
>
>
18154 From: Joe W <arizonajeep@h...>
Date: Wed Jan 31, 2001 5:25pm
Subject: I Want (Was:RE: Table Mesa run question)
I want:
A new NV4500 Transmission, RE's new Long Arm kit. A belly up skid plate, new 37" Swampers (5), Dana 60's front and rear, a Dodge V-10 Motor...
-----Original Message-----
From: SkanDreadheart@aol.com [mailto:SkanDreadheart@aol.com]
Sent: Wednesday, January 31, 2001 4:23 PM
To: James.Towle@asu.edu; az_vjc@yahoogroups.com
Subject: Re: [az_vjc] Table Mesa run question
I want off this list
18155 From: Jon Loveless <jonloveless@m...>
Date: Wed Jan 31, 2001 5:36pm
Subject: Re: Digest Number 580
You need to un subscribe using the your own email address. Send an email to:
az_vjc-unsubscribe@eGroups.com
eGroups got purchased, so iuf that doesn't work, try:
az_vjc-unsubscribe@Yahoogroups.com
Jon
At 11:48 PM 1/31/2001 +0000, you wrote:
Date: Wed, 31 Jan 2001 18:40:18 EST
From: SkanDreadheart@aol.com
Subject: Re: Front Axle
Stop e-mailing me.
18156 From: <jonloveless@m...>
Date: Wed Jan 31, 2001 5:39pm
Subject: decals
I am completely out of AZVJC decals. If you ordered any within the
last day or 2 please be patient until the new supply arrives.
Chris Lewis, please call me about the decals 480-816-6240
Thanks.
Jon
18157 From: Ray B. <kb7skv@c...>
Date: Wed Jan 31, 2001 6:57pm
Subject: Re: I Want (Was:RE: Table Mesa run question)
me too, only make it an atlas II and an soa, and a pair of custom longspline driveshafts (no chrome please) and.....
Joe W wrote:
I want:A new NV4500 Transmission, RE's new Long Arm kit. A belly up skid plate, new 37" Swampers (5), Dana 60's front and rear, a Dodge V-10 Motor...
-----Original Message-----
From: SkanDreadheart@aol.com [mailto:SkanDreadheart@aol.com]
Sent: Wednesday, January 31, 2001 4:23 PM
To: James.Towle@asu.edu; az_vjc@yahoogroups.com
Subject: Re: [az_vjc] Table Mesa run question
I want off this list
--
...---===Ray===---...
http://www.sixfigureincome.com/?841576
18158 From: Chris Krieg <rv6a@m...>
Date: Wed Jan 31, 2001 5:48pm
Subject: Re: I Want (Was:RE: Table Mesa run question)
I want:
Peace and harmony throughout the land...... or all the cool parts off Joe's Jeep (including the NV4500 if Joe ever gets it).
Chris K
From: "Joe W"
Reply-To:
Date: Wed, 31 Jan 2001 18:25:06 -0700
To: , ,
Subject: I Want (Was:RE: [az_vjc] Table Mesa run question)
I want:
A new NV4500 Transmission, RE's new Long Arm kit. A belly up skid plate, new 37" Swampers (5), Dana 60's front and rear, a Dodge V-10 Motor...
-----Original Message-----
From: SkanDreadheart@aol.com [mailto:SkanDreadheart@aol.com]
Sent: Wednesday, January 31, 2001 4:23 PM
To: James.Towle@asu.edu; az_vjc@yahoogroups.com
Subject: Re: [az_vjc] Table Mesa run question
I want off this list
18159 From: Greg Stapley <love24wheel@h...>
Date: Wed Jan 31, 2001 6:48pm
Subject: Joke
One day, a man walked into the produce section of his local
supermarket and asked to buy half a head of lettuce. The
boy working in that department told him that they only sold
whole heads of lettuce. The man was insistent that the boy
ask his manager about the matter.
Walking into the back room, the boy said to his manager,
"Some jerk out there wants to buy only half a head of
lettuce." As he finished his sentence, he turned to find
the man standing right behind him, so he added, "And this
gentleman wants to buy the other half."
The manager approved the deal and the man went on his way.
Later the manager found the boy and said "I was impressed
with the way you got yourself out of that situation
earlier. We like people who think on their feet here. Where
are you from, son?"
"Minnesota, sir," the boy replied.
"Well, why did you leave Minnesota," the manager asked.
The boy said, "Sir, there's nothing but whores and hockey
players up there."
"Really!" said the manager. "My wife is from Minnesota!"
The boy replied, "No kidding? What team did she play for?"
--------------------------------------------------------------------------------
Get your FREE download of MSN Explorer at http://explorer.msn.com
18160 From: KHD1972 <KHD1972@m...>
Date: Wed Jan 31, 2001 7:08pm
Subject: Body, Spring, and Motor Lift
Hey Everybody,
I'm hoping to do some lifting on my YJ in the near future and am in need of some parts and info.
Anybody know where I can get some good used spring packs to do an add-a-leaf front lift and 3/4 eliptical set-up?
Also wondering the best manufacturer for a 1" body lift, as well as a 1" poly-urethane motor mount lift/ poly-urethane tranny mount. Are Performance Accessories products any good? And of course, who's got the best deal?
TIA
Keirvan
KHD1972@msn.com
'95 YJ
18161 From: linda luik <minihummer@w...>
Date: Wed Jan 31, 2001 6:59pm
Subject: Thanks!! front diff guards -- again!
Thanks all! The 4xDoctor site was the one I was looking for.
Linda
18162 From: Greg Stapley <love24wheel@h...>
Date: Wed Jan 31, 2001 7:51pm
Subject: Tires for sale
Attatched are some pics of the tires, they are off stock 95 YJ
225 75 15
they are in good shape, need cleaned though...asking $125 for five of them
If anybody is interested just give me an e-mail and we can set it up from there.
Greg
--------------------------------------------------------------------------------
Get your FREE download of MSN Explorer at http://explorer.msn.com
Attachment: (image/pjpeg) jeep.jpg [not stored]
Attachment: (image/pjpeg) thread.jpg [not stored]
18163 From: Kevin <nau88xj@h...>
Date: Wed Jan 31, 2001 8:11pm
Subject: WTB CJ
does anybody have a cj, or know of a cj for sale that is not being sold by
some shady guy that has painted over the rust on the frame and has a
straight 6 engine and has just been taken care of?????? I found one and it
got away and i am pissed at myself about that one now....anybody?
thanks,
kevin
18164 From: chiena <chiena@e...>
Date: Wed Jan 31, 2001 8:43pm
Subject: Re: where to buy a driveshaft
I've had some bad experience with AA driveline ( Gloeco ). I've Dealt with
oscar and yes he's good to deal with until their's a problem. Short story-
They built me 3 yes three drives shafts before I finally got one that was
close to being balanced. Took it to Dick's in phoenix to have him check it
out and found out it had 2 yes Two flat spots and was slightly bent. So Dick
straightened it out and reballanced it and it works fine. Went back to talk
to oscar for the cost of reballance and he told me I should have brought it
back to him. After several attemps to reballance, does he actually think on
more try will do it.....He still owe's me $40.00 for getting it ballanced at
Dick's and the price difference from the original rockcrawler shaft to a
regular replacement that I ended up getting......I know I'll never get it..
This is my experience, other's may have had better or worse......you
decide.....
----- Original Message -----
From: "Matt Ulepic" <mulepic@h...>
To: "Az_Vjc@Egroups.Com" <az_vjc@yahoogroups.com>
Sent: Wednesday, January 31, 2001 11:52 AM
Subject: [az_vjc] where to buy a driveshaft
> Hi all,
> Can I get some opinions/experiences on where to purchase a front
driveshaft?
> I complete a SOA on FSJ and the driveshaft came up short.
> Thanks,
> Matt
>
>
>
18165 From: ebnhils <ebnhils@e...>
Date: Wed Jan 31, 2001 8:57pm
Subject: Re: Body, Spring, and Motor Lift
I like the 1" body lift that replaces the old mounts from Daystar. This way you get all new mounts plus the body lift. I have these on my YJ, I also have the 1" poly motor mounts from Currie that I got from Rubicon and the Teraflex Belly-Up skid plate. You will probly get the best price from Toybox Off Road.
As for the springs you can get some from the people that have the Jeep yard sale in Glendale there number is 602-548-6348 ask for John or Robert. I would recommend that you put rear springs on the front this is the same as adding a leaf without having to tear the spring pack apart.
As for the tranny mount I think that Performance Accessories is the way to go they seem to have good products but I have not used them yet.
Eben
92 YJ SOA
----- Original Message -----
From: KHD1972
To: az_vjc@yahoogroups.com
Sent: Wednesday, January 31, 2001 8:08 PM
Subject: [az_vjc] Body, Spring, and Motor Lift
Hey Everybody,
I'm hoping to do some lifting on my YJ in the near future and am in need of some parts and info.
Anybody know where I can get some good used spring packs to do an add-a-leaf front lift and 3/4 eliptical set-up?
Also wondering the best manufacturer for a 1" body lift, as well as a 1" poly-urethane motor mount lift/ poly-urethane tranny mount. Are Performance Accessories products any good? And of course, who's got the best deal?
TIA
Keirvan
KHD1972@msn.com
'95 YJ
18166 From: <FLEXYXJ@a...>
Date: Wed Jan 31, 2001 3:52pm
Subject: Wheels for sale...CHEAP!!
Well I finally got my Centerline Tel-Star wheels today so.....I have 2 sets
of wheels availble for sale....CHEAP
The set that was on my XJ...15x8 eagle alloy, 5 on 4.5 bolt pattern, one is
rough (beat straight from upper terminator run!!!) will polish up nice, they
are dinged but....:) Make me an offer...
complete set of 15x10 centerline Tel-star wheels, 5 on 4.5 bolt pattern, once
again dinged but VERY useable...oh yeah both are 4.25" backspace...
My wife has accused me of collecting wheels so they have to go..also have set
of STOCK Xj wheels and 94 ZJ limited wheels if anyone interested....
THANX.......FLEXYXJ@aol.com
18167 From: Dan Coley <mt_b@y...>
Date: Wed Jan 31, 2001 8:59pm
Subject: Re: Author Column Fix for those with the troubles.
Test post.
--- In az_vjc@y..., "JEEP THANG" <jeep_thang@h...> wrote:
> To get your name in the Author Column instead of your E-mail
address,
> you have to:
>
> 1. Go into Account Information (Top Right of Screen)
> 2. You will see the Yahoo ID card, in the grey column on the
right
> you will see Edit/ Create Profiles (Click It)
> 3. Then you will see a Yellow set of Boxes/Strip with your Yahoo
ID,
> next to that you will see an Edit Link (click It)
> 4. It will come up with your profile information, if you do not
have
> your Name in it, it will display your e-mail address, If your Name
is
> not present click on the (Edit Profile Information) link. Put your
> information in and then click finished and your next post should
have
> your Name instead of your E-mail.
>
> Hope this helps.
>
> Sincerely: Larry George
> JEEP THANG
18168 From: T.J. Nosmo-King <ice626@h...>
Date: Wed Jan 31, 2001 9:48pm
Subject: Re: Updated III FS
the site lists about a thousand different rims....who makes them???
__________________________________________________ _______________
Get your FREE download of MSN Explorer at http://explorer.msn.com
18169 From: Scott Kruize <osmtj@y...>
Date: Wed Jan 31, 2001 10:30pm
Subject: Re: Front Axle
If you want to unsubscribe from the list you need to send an email to the following address:
az_vjc-unsubscribe@yahoogroups.com
Later,
Scott
SkanDreadheart@aol.com wrote:
Stop e-mailing me.
--------------------------------------------------------------------------------
Do You Yahoo!?
- Get personalized email addresses from Yahoo! Mail Personal Address - only $35 a year!