E Bay Rock Crawler

[RokNRich]

Man, if I didn't all ready have too many vehicles sitting in the yard and had an extra $20k, I'd like to have something like this.


http://i23.ebayimg.com/01/i/04/d2/20/12_12_sb.JPG

http://cgi.ebay.com/ebaymotors/Jeep-Wrangler-full-tube-NO-RESERVE-ROCKCRAWLER-TUBE-CHASSIS-DANA-BEADLOCKS-WARN_W0QQcmdZViewItemQQcategoryZ6285QQitemZ4571777 507QQrdZ1QQsspagenameZWDVW

Does this seem like a good deal ?

Anything wrong with this set up that I may have missed ?

I want !

[RokNRich]

Vehicle Description

NO RESERVE>>>>>>Up for sell is a 2005 model tube chassis with Rear steer. This is a one of a kind rig with the only rear steer axle in the ROCK CRAWLING CIRCUIT. This buggy was built with ONLY the best of all parts. It all starts with a Chevy 350 VORTEC. K&N air filter flowtec headers flowmaster exhaust. Transmission is turbo 350 with heavy spag gears clutches and band. ART CARR shifter with cut out gates for a fast reverse or first gear? Transfer case is a Dana 300 with currie twin sticks, Tera-Low 4-1 gear kit with advance adaptor heavy duty 32 spline output shaft with Spicer 1410 u-joint. The front axle is a WMS front axle it is built with a high pinion Dana 60 with passenger side drop Narrowed to 64in wide. It has a double End hydraulic steering ram with QA1 rod end top of the line (48000 pound) PSC clevis ends 4.88 gears Detroit lockers 4340 axle shafts inter /outer, WARN 35 spline drive flanges, duel piston brake calipers all brake lines are flex front to rear. With a WILWOOD duel brake Master cylinder. The REAR AXLE is a one of a kind WMS axle. with a HIGH pinion center section and 2 1/2 Rockwell outer knuckles. YES you have an UNBREAKABLE rear steer axle. Stand it staight up and hammer down it doesn’t matter. This axle has a u-joint 4 times the size as a 60 u-joint. And don't have that big mess of a 2 1/2 axle under you buggy. INSIDE of the rear axle you have a Detroit locker 4.88 gears and a 4340 axle shafts. It also has the same parts on the rear as the front for steering. It is all power with PARKER/ PSC hydraulic system. The rims are 17in TRAIL READY with 42in IROC. Front winch is a 6000 WARN, the rear winch is a 2500,g-force seat belts, RCI fuel tank, FOX AIR SHOCKS BTF battery box, Moroso master kill switch, Kirkey seats, Auto Meter gauges and all 1 1/4DOM-control arms with a 1 1/2 sleeve. There is a list of ever little thing that goes on for days if you would like to know about any part/parts just email me and I will get it to you ASAP. PLEASE ONLY PEOPLE WHO WILL PAY BID!!!

[AZXJ]

Looks like a Hendrix X chassis to me.. That's not one of a kind.. lol... You can get these Chassis and build them how ever you want..

Hendrix X chassis (http://hendrixmotorsports.com/_wsn/page2.html)

later

[Devil Man]

build your own :D

[RokNRich]

I don't think I could build one for that price, and it would probably take forever to finish.

At the current bid of 15.8K, it seems like a pretty cool toy.

[RokNRich]

wow, sold for $22,450.

Think you can build one for less than that ?

[AZXJ]

I probablly couldn't due to lack of equiptment and space but I know John K. at Hunter Offroad could...

[Hackle]

wow, sold for $22,450.

Think you can build one for less than that ?

If you include your time as an expense you can not touch something like that building it yourself for that amount of money. It is a great buggy but they are probably selling it to go to the newer type with a 4 banger with turbo for size and weight savings. Buying used saves you a lot of money over building. I could not sell my YJ for anything near what I have in it. Personally I still like running something that I built.
Jim F.

[T.C.'S TOY]

Absolutely Jim I Agree , Man Where Does All The Madness Stop.............Toy