PDA

View Full Version : Need Stiffeners Installed



CrashDawson
12-01-2010, 11:44 AM
I need frame Stiffeners installed on my 1992 Cherokee 4x4.
The stiffeners were made by AtoZ Fabrication.
I have Full Traction Long arm kit installed.
So...
The Stiffeners need some holes drilled in them for the Long arm brackets to be remounted. It has holes for the Skid plate.
I also picked up new nuts and bolts that I want welded on the new stiffeners to mount the Skid plate and the long arm brackets to.
I can get the Unibody sanded and nerf bars cut off and carpet removed so it wont catch on fire when welding. (Stiffeners attach 1in on the floor)
I can also drop it off for a few days if needed.
Would like to get these installed soon!
Thanks

CrashDawson
12-29-2010, 09:01 AM
Getting them installed Jeep is sitting up at Desert Fab right now.

taggart_lumpy
12-29-2010, 09:33 AM
Pics after they are done :)

Fire Ball
12-29-2010, 09:41 AM
I thought this was a thread looking for a urologist :)

CrashDawson
12-29-2010, 01:02 PM
This is what the stiffeners look like they go from the original lower control arm bucket to the rear leaf springs.
covers the bottem of the uni body rail the side of the rail and also goes one inch on the floor board.
http://www.atozfabrication.com/store/image.php?type=P&id=16321