PDA

View Full Version : Winch Dimension's



Jamie
06-14-2010, 03:21 PM
I am going to build a front bumper and I don't have a winch yet. Does anyone know the common size of a winch so I can build the bumper now and get a winch later?

wj_brillo
06-14-2010, 03:35 PM
should have what ya need here ya?

Just googled Warn Winch Dimensions

Warn Industries - Ultimate Performance Series: 9.5xp

The fast, powerful WARN 9.5xp Extreme Performance is designed for the serious off-roader who demands a ... Winch Dimensions: 22.7" L. x 6.3" D. x 7.7" H. ...
[Alexa Traffic Rank for http://www.warn.com/truck/winches/95xp_winch.shtml: 306,405] www.warn.com/truck/winches/95xp_winch.shtml - Cached - Similar
Warn Industries - Premium Series: M8000

Winch Dimensions: 21.04" L. x 6.3" D. x 7.6" H. (534mm L. x 160m D. x 193mm ...
[Alexa Traffic Rank for http://www.warn.com/truck/winches/95xp_winch.shtml: 306,405] www.warn.com/truck/winches/src/M8000.shtml
Warn Industries - Premium Series: M8274-50

WARN M8274-50 ... Winch Dimensions: 16.5" L. x 8.5" D. x 15" H. ...
[Alexa Traffic Rank for http://www.warn.com/truck/winches/95xp_winch.shtml: 306,405] www.warn.com/truck/winches/src/M8274-50.shtml

Jamie
06-14-2010, 03:59 PM
That will work thanks

wj_brillo
06-14-2010, 04:10 PM
That will work thanks

np

MALLCRAWLER06
06-19-2010, 12:26 AM
When I build my bumpers with a winch plate I usually make them 8 inches wide and 24 inches long, gives it plenty of room for a variety of winches. Also most winches bolt pattern is usually 4 1/2 inch x 10 inches, center hole to center hole.

azgypsy
06-19-2010, 09:23 AM
np

like that new avatar!!!:smug:

Doc in AZ
06-19-2010, 09:44 AM
smittybilt winches are 4" x 10" for the bolt pattern... i would just build a plate that runs all the way from bumper bracket to bumper bracket on a zj so you will add integrity to it.

it's a little hard to see in this picture, but if you look close you can see i used a standard winch plate and spanned the bumper brackets from side to side.

http://i648.photobucket.com/albums/uu206/stonesoupmetalworks/AZlugz/Front%20Bumper/100_2280.jpg