blooddrive
01-02-2004, 07:11 PM
5791-5815 of 96466 | Previous | Next [ First | Last ] Msg # Date | Thread
5791 From: Stu Olson <solson8@u...>
Date: Fri Feb 18, 2000 8:54pm
Subject: Re: TR: Terminator
Never mind....I found the GPS data for the trail head.
Stu
Stu Olson N7QJP
Phoenix, AZ DM33vm
http://www.users.uswest.net/~solson8
http://home.off-road.com/~stu
>-----Original Message-----
>From: Stu Olson [mailto:solson8@u...]
>Sent: Friday, February 18, 2000 21:36
>To: gdclark@f...; az_vjc@eGroups.com
>Subject: [az_vjc] Re: TR: Terminator
>
>
>Does anyone happen to have a set of GPS coordinates for the Terminator? I
>thought I had them and can't find them. I might be coming out a bit later
>in the morning and don't want to hold anyone up.
>
>Stu
>
>Stu Olson N7QJP
>Phoenix, AZ DM33vm
>http://www.users.uswest.net/~solson8
>http://home.off-road.com/~stu
>
>>-----Original Message-----
>>From: gdclark@f... [mailto:gdclark@f...]
>>Sent: Thursday, February 17, 2000 23:30
>>To: az_vjc@eGroups.com
>>Subject: [az_vjc] TR: Terminator
>>
>>
>>What? Terminator trail, class 4
>>Where? Meet at I-17/Deer Valley McD's
>>When? Feb 19th at 0730 Depart 0800
>>
>>Terminator is located off of Table Mesa Road
>>
>>Please reply so I can keep
>>track of who all is going
>>
>>Greg C
>>Todd A
>>Jay E
>>Deslug + One
>>Doug B?
>>Tom Le
>>
>>Greg
>>89YJ
>>
>>
>>
>>------------------------------------------------------------------------
>>Shop the web for great deals. Save on Computers,
>>electronics, Home furnishings and more.
>>http://click.egroups.com/1/1559/4/_/1966/_/950855415/
>>
>>eGroups.com Home: http://www.egroups.com/group/az_vjc/
>>http://www.egroups.com - Simplifying group communications
>>
>>
>>
>
>
>------------------------------------------------------------------------
>Learn more with SmartPlanet. It's a new way of learning online.
>SmartPlanet offers hundreds of courses to take on your time,
>in your space. Join for FREE today!
>http://click.egroups.com/1/1700/4/_/1966/_/950935037/
>
>eGroups.com Home: http://www.egroups.com/group/az_vjc/
>http://www.egroups.com - Simplifying group communications
>
>
>
--------------------------------------------------------------------------------
ADVERTISEMENT
5792 From: James A Langdon <yucca-man@j...>
Date: Sat Feb 19, 2000 8:54am
Subject: Fw: Jeep Question?!?!?!?!
Chris,
I've forwarded this on to my Club as well. I don't have all the details
for you regarding bolt patterns and spline counts for this type of swap,
but the general opinion I've seen of this request on the
rec.autos.makers.jeep+willys newsgroup has always been that you need to
upgrade the transmission.
A clutch upgrade would fall under the tranny upgrade, and if you plan on
towing, the tranny's got to go.
Putting an I6 4.0L would probably be (slightly) easier, since that engine
was used in the Wranglers. Adding a V8 will entail some custom work,
probably including motor mounts, crossmembers, exhaust, major electrical
changes, and driveshafts just to name a few. Check with Advance Adapters
(www.advanceadapters.com) for more detail on what may be needed, and what
swaps work best. Depending on engine and tranny choices, you may also
need an adapter to the transfer case as well.
It is a doable project, but the question is how much money are you
willing to put into it? Remember, a few 4x4 mags detailed installation
of a Viper V10 into a TJ Wrangler last year. Sounds like fun, but
realize that the two Jeeps they detailed were owned by a Minnesota Viking
and by a Cisco router engineer. (His product makes the internet work, so
he's got some available funds...)
Good luck and let me know if there are any more specific questions, I can
probably find an answer for you.
Jim Yucca-man@j...
Dirty 1/2 dozen - Arizona Virtual Jeep Club
http://azvjc.web.com
89 Cherokee (RIP) 73 CJ5 (RIP)
--------- Forwarded message ----------
From: Opher30@a...
To: yucca-man@j...
Date: Fri, 18 Feb 2000 15:54:55 EST
Subject: Jeep Question?!?!?!?!
Message-ID: <12.1bd3109.25df0b9f@a...>
I recently purchased (Oct. 99) a 1997 Jeep Wrangler. I have added a 2"
lift and 31X10.5 tires on 15X10 rims. Before I customize the paint and
interior I want to boost the engine. It currently has the stock 4cyl.
What I am trying to determine is if any of the V8 engines would bolt up
to my 5 speed? I am not picky, the 5.2, 5.0 or new 4.7 would be just
fine. I know a high performance clucth would be needed, but I feel the
need for power, that and I would like to tow a trailer to go camping.
Any information you couls supply would be fantastic.
Thanks
Chris
Opher30@a...
__________________________________________________ ______________
YOU'RE PAYING TOO MUCH FOR THE INTERNET!
Juno now offers FREE Internet Access!
Try it today - there's no risk! For your FREE software, visit:
http://dl.www.juno.com/get/tagj.
5793 From: Leonard K. Pennock <lpennock@h...>
Date: Fri Feb 18, 2000 0:32pm
Subject: Re: exhaust manifold replacement -- anyone know a good place?
Lopers has a good price on the Borla header or at least they did a couple
years ago when I got mine.
I think prodyno in tempe could install it especially if you wanted a
custom exhaust the rest of the way back.
On Fri, 18 Feb 2000, Linda Luik wrote:
> Which reminds me. I need to replace the exhaust mainfold on the ZJ (4.0l) . I
> am considering a Tri-Y, but will settle for the factory part. Does anyone know
> of a place that does this sort of stuff? It doesn't look like a tough job,
> but I just don't have the time!
>
> Linda
>
> ------------------------------------------------------------------------
> At calypso.com, members create their very own web stores to earn $$.
> Just point, click & type to create a store. Earn extra money when you,
> family or friends shop from your store. Click to
> http://click.egroups.com/1/1589/4/_/1966/_/950885523/
>
> -- 20 megs of disk space in your group's Document Vault
> -- http://www.egroups.com/docvault/az_vjc/?m=1
>
>
Leonard K. Pennock
Those who walk bravely through life, unafraid of loss or failure,
find that they very rarely lose or fail.
Attachment: vcard [not shown]
5794 From: O'Boyle, David <David.OBoyle@b...>
Date: Fri Feb 18, 2000 8:49pm
Subject: Re: "new" XJ questions
Well Len,
Where should I start.. (LOL)
things will go wrong on her ride just like mine.. WWW.NAXJA.ORG
they will answer any and all XJ related questions.. or at least comment on
them... The clutch is hydralic and it is a pain to replace the slave
cylinder (going on 3 times after sat eve) my clutch when functioning is
about 6in, from all the way out to the floor. I think it can be adjusted
from the top of the pedal.. Check the clutch fluid if it is low this will
cause a short pedal sometimes... Hope this helps
Dave (azxj)
-----Original Message-----
From: Sullivan, Len
To: az_vjc@egroups.com
Cc: 'briannasmom@h...'
Sent: 2/17/00 2:14 PM
Subject: [az_vjc] "new" XJ questions
Hello all
My sister-in-law just bought a '95 Cherokee Sport 4 door (4.0, 5 speed,
75K
miles) and I'm hoping the great Jeep collective can help me with a few
questions:
The clutch engages very low.....about 1 1/2 to 2 inches from the floor.
This seems a bit low to me, but I've never driven a newer Jeep with a
manual
trans. Did these trucks have hydraulic clutches? If so, my guess is
that
the clutch has about a year left on it and will have to be replaced
eventually. Any thoughts or comments? She got a 2 year warranty with a
$100 deductible, so I told her not to worry about the clutch.....just
get it
replaced at the first sign of slipping.
The latch on the console compartment is broken. How difficult/expensive
is
it to replace?
The rear bumper has a telephone pole shaped dent in it. Does anyone
have a
stock XJ bumper cluttering up their garage?
Which rear axle looks like a hexagon when viewed from the rear? I think
the
D44 is the one with squared off edges, but again I'm not that familiar
with
the newer models.
Are there any common trouble spots on this year/model that should be
inspected during the 3 day "take it back" period? I drove it last night
and
the brakes, u-joints, steering, transfer case, tranny, etc all seem to
be in
good shape.
thanks!
Len Sullivan
Vendor Direct Transmissions
and Faxstar Operations Coordinator
CSK Automotive, Inc.
602.631.7845
mailto:lsulliv@c...
------------------------------------------------------------------------
Learn more with SmartPlanet. It's a new way of learning online.
SmartPlanet offers hundreds of courses to take on your time,
in your space. Join for FREE today!
http://click.egroups.com/1/1700/4/_/1966/_/950822453/
-- Talk to your group with your own voice!
-- http://www.egroups.com/VoiceChatPage?listName=az_vjc&m=1
5795 From: O'Boyle, David <David.OBoyle@b...>
Date: Fri Feb 18, 2000 8:51pm
Subject: Re: "new" XJ questions
Definately check the engine mounts and tranny mounts. They are 15 bucks at
4whelers supply.....
Dave (azxj)
-----Original Message-----
From: Linda Luik
To: Sullivan, Len
Cc: az_vjc@egroups.com; 'briannasmom@h...'
Sent: 2/17/00 3:09 PM
Subject: [az_vjc] Re: "new" XJ questions
check the engine mounts.
------------------------------------------------------------------------
Shabang!com is the place to get your FREE eStore, Absolutely FREE
Forever. If you have any desires to sell your products or services
online, or you want to expand your customer base for FREE, Come check
out Shabang!com FREE eStores!
http://click.egroups.com/1/1299/4/_/1966/_/950828093/
-- Check out your group's private Chat room
-- http://www.egroups.com/ChatPage?listName=az_vjc&m=1
<<Card for Luik, Linda>>
5796 From: <dirtdog@u...>
Date: Sat Feb 19, 2000 9:17pm
Subject: Parker Pics
Here is a location for a few Parker Pics, check the trip
report area and the photo album.
Bernie
Date: Sat, 19 Feb 2000 11:25:29 -0800
From: "Dale Jobe" djobe@a...
To: "Lee" LDan335036@c..., "Sam" Spruss@j..., " Dick" dick.bergeron@H..., " Tam & Tray" tntimaging@n..., " Dale" Dale.Jobe@H..., "Dale" DJobe@i..., " Nelson" dustpan@s..., "Chet & Jan" cmay@d..., " Cliff" cdaniel@I..., " Elliott" ej.bartlett@w..., " Len & Deb" Deblen424@a..., "Jay" jayamccoy@j..., " Chris" Cruessn2@a..., "Ed" Ecruess@a..., " Brent" bdozer@u..., "T.J. & John" Land11@p..., " Jess" Jesse.Chinn@H..., " Griz" John.Griswold@H..., "Tom" TOMKEYS@a..., " Craig & Chris" ej79217@g..., "Aaron & Jean" Ajmid@a..., " David & Amy" Canyonwood@a..., " Marv" Marvin.Springer@H..., " Dick & Marsha" MDBergie@a..., "Sue/Jack" Tuffie@d..., " Steve" Szorz@h..., "Linda" lindaphilipp@u..., " Bernie" dirtdog@u..., "Vicki" vickids@u..., Jacusack@a..., djtweedy@h...
Subject: Feb. 200 WEB update
Check out the web. Several updates.
Feb. Newsletter, trip reports for Parker and SweetHearts runs.
Photo album update
http://home.off-road.com/~as4wclub/
5797 From: Maniatico <maniatico@h...>
Date: Sat Feb 19, 2000 9:04pm
Subject: Crown King Questions: total trip time
How long does it take to make the entire run. I'm hearing 10 + hours. Can
someone that's been on the trail recently help me out.
Maniatico
5798 From: De Slug <mschwitz@U...>
Date: Sat Feb 19, 2000 9:39pm
Subject: Re: TR: Terminator
AWESOME!!!! I had a GREAT time! Thanks for putting this show on, and
thanks everyone for going. My buddies and I had a great time, and
enjoyed meeting y'all. I have posted pics from the digital camera at:
http://www.u.arizona.edu/~mschwitz/newpics.htm
My buddies each have a roll of film to get developed, so I'll be
updating when I get ahold of those pictures. I look forward to meeting,
and doing this again sometime! MIKE
5799 From: James A Langdon <yucca-man@j...>
Date: Sun Feb 20, 2000 0:36am
Subject: Directions to Broken Arrow
Okay,
One of the new members pointed out that I am not keeping up with the
website with a 30-minute turnaround on updates. <G> One run that I have
listed as upcoming is a Feb 26 run to Broken Arrow, but I have (again)
lost the directions. Who is leading this run, and what are the
directions for Broken Arrow and for the meeting spot? Is there any
interest in having a convoy from the East Valley?
Jim Yucca-man@j...
Dirty 1/2 dozen - Arizona Virtual Jeep Club
http://azvjc.web.com
89 Cherokee (RIP) 73 CJ5 (RIP)
When they took the Fourth Amendment, I was quiet because I didn't deal
drugs.
When they took the Fifth Amendment, I was quiet because I was innocent.
When they took the Second Amendment, I was quiet because I didn't own a
gun.
Now they've taken the First Amendment and I can't say anything.
__________________________________________________ ______________
YOU'RE PAYING TOO MUCH FOR THE INTERNET!
Juno now offers FREE Internet Access!
Try it today - there's no risk! For your FREE software, visit:
http://dl.www.juno.com/get/tagj.
5800 From: Stu Olson <solson8@u...>
Date: Sun Feb 20, 2000 6:56am
Subject: Re: Crown King Questions: total trip time
Maniatico,
I ran it last two weeks ago with my wife. We took time out to have lunch,
stopped and snooped around, took a few pictures, helped a motorcyclist with
a flat tire, and even pulled a 1/2 ton Chevy 4x4 off of the upper rock ledge
(twice). Even with the AAA motorists assistance stops, we made it up in
about 5.5 hours. We came home via Cleator and I-17.
Stu Olson N7QJP
Phoenix, AZ DM33vm
http://www.qsl.net/n7qjp/
http://home.off-road.com/~stu
http://www.users.uswest.west/~solson8
Developer of VKE Digital Voice Keyer
-----Original Message-----
From: Maniatico [mailto:maniatico@h...]
Sent: Saturday, February 19, 2000 10:04 PM
To: az_vjc@egroups.com
Subject: [az_vjc] Crown King Questions: total trip time
How long does it take to make the entire run. I'm hearing 10 + hours. Can
someone that's been on the trail recently help me out.
Maniatico
------------------------------------------------------------------------
Learn more with SmartPlanet. It's a new way of learning online.
SmartPlanet offers hundreds of courses to take on your time,
in your space. Join for FREE today!
http://click.egroups.com/1/1700/4/_/1966/_/951022863/
-- Check out your group's private Chat room
-- http://www.egroups.com/ChatPage?listName=az_vjc&m=1
5801 From: tom le <tomle_85024@y...>
Date: Sun Feb 20, 2000 7:21am
Subject: Re: TR: Terminator
Good morning to all,
I also had a GREAT time at this run and would say it
is the best run that I ever have thus far. Not to
mention with all the wonderful people, good spotters,
and a GOLDEN 1/4 bolt from Mike (De Slug) that helped
to rectify my air leak problem from my malfunctioned
solenoid for my rear ARB locker, otherwise, I probably
could not make this trip a more enjoyable with only a
front lockrite.
Tom
'94 ZJ
P.S. Nice pic's, Mike (De Slug).
--- De Slug <mschwitz@U...> wrote:
>
> AWESOME!!!! I had a GREAT time! Thanks for putting
> this show on, and
> thanks everyone for going. My buddies and I had a
> great time, and
> enjoyed meeting y'all. I have posted pics from the
> digital camera at:
> http://www.u.arizona.edu/~mschwitz/newpics.htm
> My buddies each have a roll of film to get
> developed, so I'll be
> updating when I get ahold of those pictures. I look
> forward to meeting,
> and doing this again sometime! MIKE
>
>
------------------------------------------------------------------------
> WANT FREE MAGAZINES?
> Sample over 500 magazines in 30 categories-- all for
> FREE at
> FreeShop.com, your source for thousands of free and
> trial offers!
>
http://click.egroups.com/1/1610/4/_/1966/_/951025153/
>
> -- Easily schedule meetings and events using the
> group calendar!
> -- http://www.egroups.com/cal?listname=az_vjc&m=1
>
>
>
__________________________________________________
Do You Yahoo!?
Talk to your friends online with Yahoo! Messenger.
http://im.yahoo.com
5802 From: linda luik <minihummer@w...>
Date: Sun Feb 20, 2000 9:15am
Subject: [Fwd: [ZJ] Another MSNBC Poll For Your Attention]
Date: Sat, 19 Feb 2000 21:20:16 -0800 (PST)
From: Patrick Chicas pjc@o...
To: xj-list@m..., jeeptech@l..., prerunner@o..., elchismoso@o..., fsj-list@l..., Brads michigan 4x4 page trails@m..., zj-list@m..., toy4x4@o..., ridenetl@o..., swbjeep@o..., "Neil Kapperman (Indianna Riding Coalition)" dirt@o..., nissan4x4@o..., chevy4x4@o..., m-class@o..., isuzu4x4@m..., glamis@o..., earlybroncos@o..., "Neil Kapperman (Indianna Riding Coalition)" dirt@o..., classic-jeep@m...
Subject: [ZJ] Another MSNBC Poll For Your Attention
In-Reply-To: Pine.SO4.4.05.10002190803150.8048-100000@r...
Sender: owner-zj-list@m...
Patrick Chicas <pjc@off-road.com> writes:
http://www.msnbc.com/news/371722.asp?0m=-21B
Do you think President Clinton is overstepping his authority in order to
leave an eco-legacy?
* 717 responses
Yes, Congress and the public should be more involved. 59%
No, conservation action is urgently needed. 41%
->END<------------------------------------------------------------------------
Subscription changes: http://www.off-road.com/4x4web/jeep/jeeplists.htm
5803 From: Montana <ablmontana@a...>
Date: Sun Feb 20, 2000 10:56am
Subject: Grand Cherokee 5.9
Hi....Does anyone know of any other members who have a 1998 5.9 Grand
Cherokee that loves it as much as i do or do they know of any reason to
dislike it. Also, has anyone bought a new 2000 Grand Cherokee yet?
Please let me know at your earliest convenience. Thanks in
advance...Montana
5804 From: Eric Herring <herring@u...>
Date: Sun Feb 20, 2000 0:12pm
Subject: FW: Directions to Broken Arrow
Getting to the trail is easy, just get off of I17 on the first Sedona exit
and go West until you see the broken arrow sign on the right. Turn at the
sign and follow the road to a dirt parking lot at the end. I may just meet
everyone at the trail head But let me know if anyone is planning a convoy.
Does anyone mind some non-Jeeps tagging along? Do we have a meeting time
yet?
See you there,
Eric Herring 92XJ
-----Original Message-----
From: James A Langdon [mailto:yucca-man@j...]
Sent: Sunday, February 20, 2000 1:37 AM
To: az_vjc@egroups.com
Subject: [az_vjc] Directions to Broken Arrow
Okay,
One of the new members pointed out that I am not keeping up with the
website with a 30-minute turnaround on updates. <G> One run that I have
listed as upcoming is a Feb 26 run to Broken Arrow, but I have (again)
lost the directions. Who is leading this run, and what are the
directions for Broken Arrow and for the meeting spot? Is there any
interest in having a convoy from the East Valley?
Jim Yucca-man@j...
Dirty 1/2 dozen - Arizona Virtual Jeep Club
http://azvjc.web.com
89 Cherokee (RIP) 73 CJ5 (RIP)
When they took the Fourth Amendment, I was quiet because I didn't deal
drugs.
When they took the Fifth Amendment, I was quiet because I was innocent.
When they took the Second Amendment, I was quiet because I didn't own a
gun.
Now they've taken the First Amendment and I can't say anything.
__________________________________________________ ______________
YOU'RE PAYING TOO MUCH FOR THE INTERNET!
Juno now offers FREE Internet Access!
Try it today - there's no risk! For your FREE software, visit:
http://dl.www.juno.com/get/tagj.
------------------------------------------------------------------------
GET A NEXTCARD VISA, in 30 seconds! Get rates as low as 2.9%
Intro or 9.9% Fixed APR and no hidden fees. Apply NOW!
http://click.egroups.com/1/915/4/_/1966/_/951036429/
-- 20 megs of disk space in your group's Document Vault
-- http://www.egroups.com/docvault/az_vjc/?m=1
5805 From: Larry Maggio <lmaggio@p...>
Date: Sun Feb 20, 2000 0:46pm
Subject: Re: Directions to Broken Arrow
Jim,
The Broken Arrow trip was my idea. I was really hoping someone would step up
and lead the run as I dont have any experience leading a group. If no one
wants the position then I'll do the best job I can :)
Anyone wanting to caravan from Phx should meet at the SE Corner of Carefree
& I17... we will be departing there at 8:30am sharp. Hopefully, we can be at
the trailhead by 10:00 and start airing down and disconnecting. Anyone
coming from different areas can meet us there at that time. CB and FRS
channel
4...if you have either.
Broken Arrow Directions:
Head west on the Sedona exit of I-17. Keep heading though some town traffic
past Bell Rock and past the Poco Diablo resort. Look for the sign to Broken
Arrow Estates on Morgan Rd. It will be on your right hand side. The road is
paved for a half-mile and will then turn to dirt. About a 1/4 mile up is
where the trail begins.
Regards,
Larry
Eric,
Doesnt matter to me who you bring. Why might have to break into a few groups
if there is a large turnout.
----- Original Message -----
From: James A Langdon <yucca-man@j...>
To: <az_vjc@egroups.com>
Sent: Sunday, February 20, 2000 1:36 AM
Subject: [az_vjc] Directions to Broken Arrow
> Okay,
>
> One of the new members pointed out that I am not keeping up with the
> website with a 30-minute turnaround on updates. <G> One run that I have
> listed as upcoming is a Feb 26 run to Broken Arrow, but I have (again)
> lost the directions. Who is leading this run, and what are the
> directions for Broken Arrow and for the meeting spot? Is there any
> interest in having a convoy from the East Valley?
>
> Jim Yucca-man@j...
> Dirty 1/2 dozen - Arizona Virtual Jeep Club
> http://azvjc.web.com
> 89 Cherokee (RIP) 73 CJ5 (RIP)
>
> When they took the Fourth Amendment, I was quiet because I didn't deal
> drugs.
> When they took the Fifth Amendment, I was quiet because I was innocent.
> When they took the Second Amendment, I was quiet because I didn't own a
> gun.
> Now they've taken the First Amendment and I can't say anything.
> __________________________________________________ ______________
> YOU'RE PAYING TOO MUCH FOR THE INTERNET!
> Juno now offers FREE Internet Access!
> Try it today - there's no risk! For your FREE software, visit:
> http://dl.www.juno.com/get/tagj.
>
> ------------------------------------------------------------------------
> GET A NEXTCARD VISA, in 30 seconds! Get rates as low as 2.9%
> Intro or 9.9% Fixed APR and no hidden fees. Apply NOW!
> http://click.egroups.com/1/915/4/_/1966/_/951036429/
>
> -- 20 megs of disk space in your group's Document Vault
> -- http://www.egroups.com/docvault/az_vjc/?m=1
>
>
>
5806 From: Joe West <joefwest@h...>
Date: Sun Feb 20, 2000 8:00am
Subject: 5 on 4.5 to 5 on 5.5 wheel adaptor and Warn Full floater on a TJ
Greetings,
Can anyone point me in the right direction for an adaptor which will convert
5 on 4.5" wheels to 5 on 5.5" wheels?
Here's the reason I need them (and I know it sounds like a kludge, but
listen for a minute <smile>):
This week, I'll be converting my rear axle to 5 on 5.5" via a Warn full
floating kit. I had the Warn full floater 5 on 4.5" version, but broke 3
rear hubs. Warn was kind enough to allow me to send the 5 on 4.5 version
back and receive a 5 on 5.5" at no cost (Warn's warranty service has been
very good to me). I'll be installing the new Warn kit on Wednesday, and also
an ARB and 4.56:1 gears in my rear Dana 44. No problem right? Wrong!
I still have 5 on 4.5" in the front AND, I have a Dana 44 front axle coming
from Currie in two weeks (which will have the Warn 5 on 5.5" conversion
already installed). So... I can drive around with my new 35" Super Swamper
SSRs on the rear of the Jeep with my 33" BFG KOs on the front (no wheeling
obviously since my front axle has the factory 3.73:1 gears in it) and look
really stupid, OR I can find these wheel converters and use them for two
weeks until my Currie front axle comes in.
Can anyone suggest a manufacturer for these wheel adaptors or at least point
me in the right direction?
Thanks
Joe
__________________________________________________ ____
5807 From: <BigFlatFuzzyCows@a...>
Date: Sun Feb 20, 2000 11:42am
Subject: Re: Coves Cleanup
In a message dated 2/17/2000 5:02:47 PM US Mountain Standard Time,
jloveless@e... writes:
<< 8. I will post directions next week for anyone who hasn't been to the
Coves. (Is there anyone who hasn't been there?) >>
Yup! Haven't been there. :) How do we get there?
Christi & Ken. =)
5808 From: <CoyotEddie@a...>
Date: Sun Feb 20, 2000 11:51am
Subject: Re: 5 on 4.5 to 5 on 5.5 wheel adaptor and Warn Full floater on a TJ
<A HREF="http://www.salesco.com/wheels/adapters.htm">wheel adapters, WHEEL
ADAPTERS</A>
<A HREF="http://res3.geocities.com/~atheena/Maidens/Totems/coyote.html">The
Coyote</A>
5809 From: Joe F. West <joewest2@h...>
Date: Sun Feb 20, 2000 3:41pm
Subject: No Subject
Can anyone point me in the right direction for an adaptor which will convert
5 on 4.5" wheels to 5 on 5.5" wheels?
Here's the reason I need them (and I know it sounds like a kludge, but
listen for a minute <smile>):
This week, I'll be converting my rear axle to 5 on 5.5" via a Warn full
floating kit. I had the Warn full floater 5 on 4.5" version, but broke 3
rear hubs. Warn was kind enough to allow me to send the 5 on 4.5 version
back and receive a 5 on 5.5" at no cost (Warn's warranty service has been
very good to me). I'll be installing the new Warn kit on Wednesday, and also
an ARB and 4.56:1 gears in my rear Dana 44. No problem right? Wrong!
I still have 5 on 4.5" in the front AND, I have a Dana 44 front axle coming
from Currie in two weeks (which will have the Warn 5 on 5.5" conversion
already installed). So... I can drive around with my new 35" Super Swamper
SSRs on the rear of the Jeep with my 33" BFG KOs on the front (no wheeling
obviously since my front axle has the factory 3.73:1 gears in it) and look
really stupid, OR I can find these wheel converters and use them for two
weeks until my Currie front axle comes in.
Can anyone suggest a manufacturer for these wheel adaptors or at least point
me in the right direction?
Thanks
Joe
Joe F. West
98TJ Completely Stock, Not an aftermarket part on it.
http://members.home.com/joewest2/
(Okay... so I lied) <grin>
5810 From: Jay Eller <four_by_nut@n...>
Date: Sun Feb 20, 2000 7:57pm
Subject: Re: TR: Terminator
I too had a great time on Terminator. Sitting at home, I wish I had tried
to join Mike on the run of upper Raw Deal afterwards. Maybe next time.....
Anyway, I have posted one picture for now just to wet your appetites for
what is to come. (Mike, I think you will like this one) Go to:
http://albums.photopoint.com/j/ViewPhoto?u=189155&a=1921373&p=16711291
I have another 68 pictures to come from the digital camera, so stay tuned!!
It is about 7 meg worth of pics so I am going to wait to download them from
work on Tuesday where the T1 line is my friend. :-)))))
Talk to you all soon.
--
==============
Jay-Bird
http://www.goodnet.com/~eller
__________________________________________
NetZero - Defenders of the Free World
Get your FREE Internet Access and Email at
http://www.netzero.net/download/index.html
5811 From: DougB <azjeep@h...>
Date: Sun Feb 20, 2000 7:16pm
Subject: Re: TR: Terminator
Awesome flex!
----- Original Message -----
From: Jay Eller <four_by_nut@n...>
Cc: <az_vjc@eGroups.com>
Sent: Sunday, February 20, 2000 8:57 PM
Subject: [az_vjc] Re: TR: Terminator
> I too had a great time on Terminator. Sitting at home, I wish I had tried
> to join Mike on the run of upper Raw Deal afterwards. Maybe next
time.....
>
> Anyway, I have posted one picture for now just to wet your appetites for
> what is to come. (Mike, I think you will like this one) Go to:
>
> http://albums.photopoint.com/j/ViewPhoto?u=189155&a=1921373&p=16711291
>
> I have another 68 pictures to come from the digital camera, so stay
tuned!!
> It is about 7 meg worth of pics so I am going to wait to download them
from
> work on Tuesday where the T1 line is my friend. :-)))))
>
> Talk to you all soon.
> --
> ==============
> Jay-Bird
> http://www.goodnet.com/~eller
>
>
> __________________________________________
> NetZero - Defenders of the Free World
> Get your FREE Internet Access and Email at
> http://www.netzero.net/download/index.html
>
> ------------------------------------------------------------------------
> Learn more with SmartPlanet. It's a new way of learning online.
> SmartPlanet offers hundreds of courses to take on your time,
> in your space. Join for FREE today!
> http://click.egroups.com/1/1700/4/_/1966/_/951102141/
>
> -- Easily schedule meetings and events using the group calendar!
> -- http://www.egroups.com/cal?listname=az_vjc&m=1
>
>
5812 From: O'Boyle, David <David.OBoyle@b...>
Date: Sun Feb 20, 2000 7:15pm
Subject: Slave cylinder question
Does anyone know where I can get a heavy duty slave cylinder for my XJ?
Also if the carpet is torn where the clutch pedal usually hits the carpet
and the pedal is hitting the floor board will this cause over-extension of
the slave cylinder?
Thanks
Dave (azxj'less, agian)
5813 From: Eric Marble <EMarble3@p...>
Date: Sun Feb 20, 2000 6:25pm
Subject: Re: transfer case
If anyone needs a np231 transfer case, I hve one for sale..
not sure what one goes for now a days but make a offer.
5814 From: <gdclark@f...>
Date: Sun Feb 20, 2000 9:12pm
Subject: Re: TR: Terminator
"dougb" <azjee-@h...> wrote:
original article:http://www.egroups.com/group/az_vjc/?start=5811
Wait till you see pics of Mike trying
to imitate a turtle
This was an awesome trail, i had a great time
Jay can't wait to see the pics Jay
Greg
89yj
> Awesome flex!
>
> ----- Original Message -----
> From: Jay Eller <four_by_nut@n...>
> Cc: <az_vjc@eGroups.com>
> Sent: Sunday, February 20, 2000 8:57 PM
> Subject: [az_vjc] Re: TR: Terminator
>
>
> > I too had a great time on Terminator. Sitting at home, I wish I
had tried
> > to join Mike on the run of upper Raw Deal afterwards. Maybe next
> time.....
> >
> > Anyway, I have posted one picture for now just to wet your
appetites for
> > what is to come. (Mike, I think you will like this one) Go to:
> >
> > http://albums.photopoint.com/j/ViewPhoto?u=189155&a=1921373&p=16711
291
> >
> > I have another 68 pictures to come from the digital camera, so stay
> tuned!!
> > It is about 7 meg worth of pics so I am going to wait to download
them
> from
> > work on Tuesday where the T1 line is my friend. :-)))))
> >
> > Talk to you all soon.
> > --
> > ==============
> > Jay-Bird
> > http://www.goodnet.com/~eller
> >
> >
> > __________________________________________
> > NetZero - Defenders of the Free World
> > Get your FREE Internet Access and Email at
> > http://www.netzero.net/download/index.html
> >
5815 From: James A Langdon <yucca-man@j...>
Date: Sun Feb 20, 2000 11:20pm
Subject: Re: Slave cylinder question
Dave,
Sorry to hear about your ongoing troubles with your XJ. You know...I've
got a (supposedly) good driveline, and yours starts...together that's a
Jeep that might run!
From what I've seen of the master and slave cylinders, they have a lot
more movement available than the clutch pedal is capable of. However, I
was more concerned with the master cylinder when I looked into that
question, since mine had leaked and damaged my fusebox again. I don't
know of any 'heavy-duty' slave cylinders, but would recommend this as one
of those times to cough up the extra couple bucks to get new dealer parts
instead of rebuilt AutoClone stuff.
Jim Yucca-man@j...
Dirty 1/2 dozen - Arizona Virtual Jeep Club
http://azvjc.web.com
89 Cherokee (RIP) 73 CJ5 (RIP)
On Sun, 20 Feb 2000 20:15:04 -0700 "O'Boyle, David"
<David.OBoyle@b...> writes:
> Does anyone know where I can get a heavy duty slave cylinder for my
> XJ?
>
> Also if the carpet is torn where the clutch pedal usually hits the
> carpet
> and the pedal is hitting the floor board will this cause
> over-extension of
> the slave cylinder?
>
> Thanks
> Dave (azxj'less, agian)
__________________________________________________ ______________
YOU'RE PAYING TOO MUCH FOR THE INTERNET!
Juno now offers FREE Internet Access!
Try it today - there's no risk! For your FREE software, visit:
http://dl.www.juno.com/get/tagj.
5791 From: Stu Olson <solson8@u...>
Date: Fri Feb 18, 2000 8:54pm
Subject: Re: TR: Terminator
Never mind....I found the GPS data for the trail head.
Stu
Stu Olson N7QJP
Phoenix, AZ DM33vm
http://www.users.uswest.net/~solson8
http://home.off-road.com/~stu
>-----Original Message-----
>From: Stu Olson [mailto:solson8@u...]
>Sent: Friday, February 18, 2000 21:36
>To: gdclark@f...; az_vjc@eGroups.com
>Subject: [az_vjc] Re: TR: Terminator
>
>
>Does anyone happen to have a set of GPS coordinates for the Terminator? I
>thought I had them and can't find them. I might be coming out a bit later
>in the morning and don't want to hold anyone up.
>
>Stu
>
>Stu Olson N7QJP
>Phoenix, AZ DM33vm
>http://www.users.uswest.net/~solson8
>http://home.off-road.com/~stu
>
>>-----Original Message-----
>>From: gdclark@f... [mailto:gdclark@f...]
>>Sent: Thursday, February 17, 2000 23:30
>>To: az_vjc@eGroups.com
>>Subject: [az_vjc] TR: Terminator
>>
>>
>>What? Terminator trail, class 4
>>Where? Meet at I-17/Deer Valley McD's
>>When? Feb 19th at 0730 Depart 0800
>>
>>Terminator is located off of Table Mesa Road
>>
>>Please reply so I can keep
>>track of who all is going
>>
>>Greg C
>>Todd A
>>Jay E
>>Deslug + One
>>Doug B?
>>Tom Le
>>
>>Greg
>>89YJ
>>
>>
>>
>>------------------------------------------------------------------------
>>Shop the web for great deals. Save on Computers,
>>electronics, Home furnishings and more.
>>http://click.egroups.com/1/1559/4/_/1966/_/950855415/
>>
>>eGroups.com Home: http://www.egroups.com/group/az_vjc/
>>http://www.egroups.com - Simplifying group communications
>>
>>
>>
>
>
>------------------------------------------------------------------------
>Learn more with SmartPlanet. It's a new way of learning online.
>SmartPlanet offers hundreds of courses to take on your time,
>in your space. Join for FREE today!
>http://click.egroups.com/1/1700/4/_/1966/_/950935037/
>
>eGroups.com Home: http://www.egroups.com/group/az_vjc/
>http://www.egroups.com - Simplifying group communications
>
>
>
--------------------------------------------------------------------------------
ADVERTISEMENT
5792 From: James A Langdon <yucca-man@j...>
Date: Sat Feb 19, 2000 8:54am
Subject: Fw: Jeep Question?!?!?!?!
Chris,
I've forwarded this on to my Club as well. I don't have all the details
for you regarding bolt patterns and spline counts for this type of swap,
but the general opinion I've seen of this request on the
rec.autos.makers.jeep+willys newsgroup has always been that you need to
upgrade the transmission.
A clutch upgrade would fall under the tranny upgrade, and if you plan on
towing, the tranny's got to go.
Putting an I6 4.0L would probably be (slightly) easier, since that engine
was used in the Wranglers. Adding a V8 will entail some custom work,
probably including motor mounts, crossmembers, exhaust, major electrical
changes, and driveshafts just to name a few. Check with Advance Adapters
(www.advanceadapters.com) for more detail on what may be needed, and what
swaps work best. Depending on engine and tranny choices, you may also
need an adapter to the transfer case as well.
It is a doable project, but the question is how much money are you
willing to put into it? Remember, a few 4x4 mags detailed installation
of a Viper V10 into a TJ Wrangler last year. Sounds like fun, but
realize that the two Jeeps they detailed were owned by a Minnesota Viking
and by a Cisco router engineer. (His product makes the internet work, so
he's got some available funds...)
Good luck and let me know if there are any more specific questions, I can
probably find an answer for you.
Jim Yucca-man@j...
Dirty 1/2 dozen - Arizona Virtual Jeep Club
http://azvjc.web.com
89 Cherokee (RIP) 73 CJ5 (RIP)
--------- Forwarded message ----------
From: Opher30@a...
To: yucca-man@j...
Date: Fri, 18 Feb 2000 15:54:55 EST
Subject: Jeep Question?!?!?!?!
Message-ID: <12.1bd3109.25df0b9f@a...>
I recently purchased (Oct. 99) a 1997 Jeep Wrangler. I have added a 2"
lift and 31X10.5 tires on 15X10 rims. Before I customize the paint and
interior I want to boost the engine. It currently has the stock 4cyl.
What I am trying to determine is if any of the V8 engines would bolt up
to my 5 speed? I am not picky, the 5.2, 5.0 or new 4.7 would be just
fine. I know a high performance clucth would be needed, but I feel the
need for power, that and I would like to tow a trailer to go camping.
Any information you couls supply would be fantastic.
Thanks
Chris
Opher30@a...
__________________________________________________ ______________
YOU'RE PAYING TOO MUCH FOR THE INTERNET!
Juno now offers FREE Internet Access!
Try it today - there's no risk! For your FREE software, visit:
http://dl.www.juno.com/get/tagj.
5793 From: Leonard K. Pennock <lpennock@h...>
Date: Fri Feb 18, 2000 0:32pm
Subject: Re: exhaust manifold replacement -- anyone know a good place?
Lopers has a good price on the Borla header or at least they did a couple
years ago when I got mine.
I think prodyno in tempe could install it especially if you wanted a
custom exhaust the rest of the way back.
On Fri, 18 Feb 2000, Linda Luik wrote:
> Which reminds me. I need to replace the exhaust mainfold on the ZJ (4.0l) . I
> am considering a Tri-Y, but will settle for the factory part. Does anyone know
> of a place that does this sort of stuff? It doesn't look like a tough job,
> but I just don't have the time!
>
> Linda
>
> ------------------------------------------------------------------------
> At calypso.com, members create their very own web stores to earn $$.
> Just point, click & type to create a store. Earn extra money when you,
> family or friends shop from your store. Click to
> http://click.egroups.com/1/1589/4/_/1966/_/950885523/
>
> -- 20 megs of disk space in your group's Document Vault
> -- http://www.egroups.com/docvault/az_vjc/?m=1
>
>
Leonard K. Pennock
Those who walk bravely through life, unafraid of loss or failure,
find that they very rarely lose or fail.
Attachment: vcard [not shown]
5794 From: O'Boyle, David <David.OBoyle@b...>
Date: Fri Feb 18, 2000 8:49pm
Subject: Re: "new" XJ questions
Well Len,
Where should I start.. (LOL)
things will go wrong on her ride just like mine.. WWW.NAXJA.ORG
they will answer any and all XJ related questions.. or at least comment on
them... The clutch is hydralic and it is a pain to replace the slave
cylinder (going on 3 times after sat eve) my clutch when functioning is
about 6in, from all the way out to the floor. I think it can be adjusted
from the top of the pedal.. Check the clutch fluid if it is low this will
cause a short pedal sometimes... Hope this helps
Dave (azxj)
-----Original Message-----
From: Sullivan, Len
To: az_vjc@egroups.com
Cc: 'briannasmom@h...'
Sent: 2/17/00 2:14 PM
Subject: [az_vjc] "new" XJ questions
Hello all
My sister-in-law just bought a '95 Cherokee Sport 4 door (4.0, 5 speed,
75K
miles) and I'm hoping the great Jeep collective can help me with a few
questions:
The clutch engages very low.....about 1 1/2 to 2 inches from the floor.
This seems a bit low to me, but I've never driven a newer Jeep with a
manual
trans. Did these trucks have hydraulic clutches? If so, my guess is
that
the clutch has about a year left on it and will have to be replaced
eventually. Any thoughts or comments? She got a 2 year warranty with a
$100 deductible, so I told her not to worry about the clutch.....just
get it
replaced at the first sign of slipping.
The latch on the console compartment is broken. How difficult/expensive
is
it to replace?
The rear bumper has a telephone pole shaped dent in it. Does anyone
have a
stock XJ bumper cluttering up their garage?
Which rear axle looks like a hexagon when viewed from the rear? I think
the
D44 is the one with squared off edges, but again I'm not that familiar
with
the newer models.
Are there any common trouble spots on this year/model that should be
inspected during the 3 day "take it back" period? I drove it last night
and
the brakes, u-joints, steering, transfer case, tranny, etc all seem to
be in
good shape.
thanks!
Len Sullivan
Vendor Direct Transmissions
and Faxstar Operations Coordinator
CSK Automotive, Inc.
602.631.7845
mailto:lsulliv@c...
------------------------------------------------------------------------
Learn more with SmartPlanet. It's a new way of learning online.
SmartPlanet offers hundreds of courses to take on your time,
in your space. Join for FREE today!
http://click.egroups.com/1/1700/4/_/1966/_/950822453/
-- Talk to your group with your own voice!
-- http://www.egroups.com/VoiceChatPage?listName=az_vjc&m=1
5795 From: O'Boyle, David <David.OBoyle@b...>
Date: Fri Feb 18, 2000 8:51pm
Subject: Re: "new" XJ questions
Definately check the engine mounts and tranny mounts. They are 15 bucks at
4whelers supply.....
Dave (azxj)
-----Original Message-----
From: Linda Luik
To: Sullivan, Len
Cc: az_vjc@egroups.com; 'briannasmom@h...'
Sent: 2/17/00 3:09 PM
Subject: [az_vjc] Re: "new" XJ questions
check the engine mounts.
------------------------------------------------------------------------
Shabang!com is the place to get your FREE eStore, Absolutely FREE
Forever. If you have any desires to sell your products or services
online, or you want to expand your customer base for FREE, Come check
out Shabang!com FREE eStores!
http://click.egroups.com/1/1299/4/_/1966/_/950828093/
-- Check out your group's private Chat room
-- http://www.egroups.com/ChatPage?listName=az_vjc&m=1
<<Card for Luik, Linda>>
5796 From: <dirtdog@u...>
Date: Sat Feb 19, 2000 9:17pm
Subject: Parker Pics
Here is a location for a few Parker Pics, check the trip
report area and the photo album.
Bernie
Date: Sat, 19 Feb 2000 11:25:29 -0800
From: "Dale Jobe" djobe@a...
To: "Lee" LDan335036@c..., "Sam" Spruss@j..., " Dick" dick.bergeron@H..., " Tam & Tray" tntimaging@n..., " Dale" Dale.Jobe@H..., "Dale" DJobe@i..., " Nelson" dustpan@s..., "Chet & Jan" cmay@d..., " Cliff" cdaniel@I..., " Elliott" ej.bartlett@w..., " Len & Deb" Deblen424@a..., "Jay" jayamccoy@j..., " Chris" Cruessn2@a..., "Ed" Ecruess@a..., " Brent" bdozer@u..., "T.J. & John" Land11@p..., " Jess" Jesse.Chinn@H..., " Griz" John.Griswold@H..., "Tom" TOMKEYS@a..., " Craig & Chris" ej79217@g..., "Aaron & Jean" Ajmid@a..., " David & Amy" Canyonwood@a..., " Marv" Marvin.Springer@H..., " Dick & Marsha" MDBergie@a..., "Sue/Jack" Tuffie@d..., " Steve" Szorz@h..., "Linda" lindaphilipp@u..., " Bernie" dirtdog@u..., "Vicki" vickids@u..., Jacusack@a..., djtweedy@h...
Subject: Feb. 200 WEB update
Check out the web. Several updates.
Feb. Newsletter, trip reports for Parker and SweetHearts runs.
Photo album update
http://home.off-road.com/~as4wclub/
5797 From: Maniatico <maniatico@h...>
Date: Sat Feb 19, 2000 9:04pm
Subject: Crown King Questions: total trip time
How long does it take to make the entire run. I'm hearing 10 + hours. Can
someone that's been on the trail recently help me out.
Maniatico
5798 From: De Slug <mschwitz@U...>
Date: Sat Feb 19, 2000 9:39pm
Subject: Re: TR: Terminator
AWESOME!!!! I had a GREAT time! Thanks for putting this show on, and
thanks everyone for going. My buddies and I had a great time, and
enjoyed meeting y'all. I have posted pics from the digital camera at:
http://www.u.arizona.edu/~mschwitz/newpics.htm
My buddies each have a roll of film to get developed, so I'll be
updating when I get ahold of those pictures. I look forward to meeting,
and doing this again sometime! MIKE
5799 From: James A Langdon <yucca-man@j...>
Date: Sun Feb 20, 2000 0:36am
Subject: Directions to Broken Arrow
Okay,
One of the new members pointed out that I am not keeping up with the
website with a 30-minute turnaround on updates. <G> One run that I have
listed as upcoming is a Feb 26 run to Broken Arrow, but I have (again)
lost the directions. Who is leading this run, and what are the
directions for Broken Arrow and for the meeting spot? Is there any
interest in having a convoy from the East Valley?
Jim Yucca-man@j...
Dirty 1/2 dozen - Arizona Virtual Jeep Club
http://azvjc.web.com
89 Cherokee (RIP) 73 CJ5 (RIP)
When they took the Fourth Amendment, I was quiet because I didn't deal
drugs.
When they took the Fifth Amendment, I was quiet because I was innocent.
When they took the Second Amendment, I was quiet because I didn't own a
gun.
Now they've taken the First Amendment and I can't say anything.
__________________________________________________ ______________
YOU'RE PAYING TOO MUCH FOR THE INTERNET!
Juno now offers FREE Internet Access!
Try it today - there's no risk! For your FREE software, visit:
http://dl.www.juno.com/get/tagj.
5800 From: Stu Olson <solson8@u...>
Date: Sun Feb 20, 2000 6:56am
Subject: Re: Crown King Questions: total trip time
Maniatico,
I ran it last two weeks ago with my wife. We took time out to have lunch,
stopped and snooped around, took a few pictures, helped a motorcyclist with
a flat tire, and even pulled a 1/2 ton Chevy 4x4 off of the upper rock ledge
(twice). Even with the AAA motorists assistance stops, we made it up in
about 5.5 hours. We came home via Cleator and I-17.
Stu Olson N7QJP
Phoenix, AZ DM33vm
http://www.qsl.net/n7qjp/
http://home.off-road.com/~stu
http://www.users.uswest.west/~solson8
Developer of VKE Digital Voice Keyer
-----Original Message-----
From: Maniatico [mailto:maniatico@h...]
Sent: Saturday, February 19, 2000 10:04 PM
To: az_vjc@egroups.com
Subject: [az_vjc] Crown King Questions: total trip time
How long does it take to make the entire run. I'm hearing 10 + hours. Can
someone that's been on the trail recently help me out.
Maniatico
------------------------------------------------------------------------
Learn more with SmartPlanet. It's a new way of learning online.
SmartPlanet offers hundreds of courses to take on your time,
in your space. Join for FREE today!
http://click.egroups.com/1/1700/4/_/1966/_/951022863/
-- Check out your group's private Chat room
-- http://www.egroups.com/ChatPage?listName=az_vjc&m=1
5801 From: tom le <tomle_85024@y...>
Date: Sun Feb 20, 2000 7:21am
Subject: Re: TR: Terminator
Good morning to all,
I also had a GREAT time at this run and would say it
is the best run that I ever have thus far. Not to
mention with all the wonderful people, good spotters,
and a GOLDEN 1/4 bolt from Mike (De Slug) that helped
to rectify my air leak problem from my malfunctioned
solenoid for my rear ARB locker, otherwise, I probably
could not make this trip a more enjoyable with only a
front lockrite.
Tom
'94 ZJ
P.S. Nice pic's, Mike (De Slug).
--- De Slug <mschwitz@U...> wrote:
>
> AWESOME!!!! I had a GREAT time! Thanks for putting
> this show on, and
> thanks everyone for going. My buddies and I had a
> great time, and
> enjoyed meeting y'all. I have posted pics from the
> digital camera at:
> http://www.u.arizona.edu/~mschwitz/newpics.htm
> My buddies each have a roll of film to get
> developed, so I'll be
> updating when I get ahold of those pictures. I look
> forward to meeting,
> and doing this again sometime! MIKE
>
>
------------------------------------------------------------------------
> WANT FREE MAGAZINES?
> Sample over 500 magazines in 30 categories-- all for
> FREE at
> FreeShop.com, your source for thousands of free and
> trial offers!
>
http://click.egroups.com/1/1610/4/_/1966/_/951025153/
>
> -- Easily schedule meetings and events using the
> group calendar!
> -- http://www.egroups.com/cal?listname=az_vjc&m=1
>
>
>
__________________________________________________
Do You Yahoo!?
Talk to your friends online with Yahoo! Messenger.
http://im.yahoo.com
5802 From: linda luik <minihummer@w...>
Date: Sun Feb 20, 2000 9:15am
Subject: [Fwd: [ZJ] Another MSNBC Poll For Your Attention]
Date: Sat, 19 Feb 2000 21:20:16 -0800 (PST)
From: Patrick Chicas pjc@o...
To: xj-list@m..., jeeptech@l..., prerunner@o..., elchismoso@o..., fsj-list@l..., Brads michigan 4x4 page trails@m..., zj-list@m..., toy4x4@o..., ridenetl@o..., swbjeep@o..., "Neil Kapperman (Indianna Riding Coalition)" dirt@o..., nissan4x4@o..., chevy4x4@o..., m-class@o..., isuzu4x4@m..., glamis@o..., earlybroncos@o..., "Neil Kapperman (Indianna Riding Coalition)" dirt@o..., classic-jeep@m...
Subject: [ZJ] Another MSNBC Poll For Your Attention
In-Reply-To: Pine.SO4.4.05.10002190803150.8048-100000@r...
Sender: owner-zj-list@m...
Patrick Chicas <pjc@off-road.com> writes:
http://www.msnbc.com/news/371722.asp?0m=-21B
Do you think President Clinton is overstepping his authority in order to
leave an eco-legacy?
* 717 responses
Yes, Congress and the public should be more involved. 59%
No, conservation action is urgently needed. 41%
->END<------------------------------------------------------------------------
Subscription changes: http://www.off-road.com/4x4web/jeep/jeeplists.htm
5803 From: Montana <ablmontana@a...>
Date: Sun Feb 20, 2000 10:56am
Subject: Grand Cherokee 5.9
Hi....Does anyone know of any other members who have a 1998 5.9 Grand
Cherokee that loves it as much as i do or do they know of any reason to
dislike it. Also, has anyone bought a new 2000 Grand Cherokee yet?
Please let me know at your earliest convenience. Thanks in
advance...Montana
5804 From: Eric Herring <herring@u...>
Date: Sun Feb 20, 2000 0:12pm
Subject: FW: Directions to Broken Arrow
Getting to the trail is easy, just get off of I17 on the first Sedona exit
and go West until you see the broken arrow sign on the right. Turn at the
sign and follow the road to a dirt parking lot at the end. I may just meet
everyone at the trail head But let me know if anyone is planning a convoy.
Does anyone mind some non-Jeeps tagging along? Do we have a meeting time
yet?
See you there,
Eric Herring 92XJ
-----Original Message-----
From: James A Langdon [mailto:yucca-man@j...]
Sent: Sunday, February 20, 2000 1:37 AM
To: az_vjc@egroups.com
Subject: [az_vjc] Directions to Broken Arrow
Okay,
One of the new members pointed out that I am not keeping up with the
website with a 30-minute turnaround on updates. <G> One run that I have
listed as upcoming is a Feb 26 run to Broken Arrow, but I have (again)
lost the directions. Who is leading this run, and what are the
directions for Broken Arrow and for the meeting spot? Is there any
interest in having a convoy from the East Valley?
Jim Yucca-man@j...
Dirty 1/2 dozen - Arizona Virtual Jeep Club
http://azvjc.web.com
89 Cherokee (RIP) 73 CJ5 (RIP)
When they took the Fourth Amendment, I was quiet because I didn't deal
drugs.
When they took the Fifth Amendment, I was quiet because I was innocent.
When they took the Second Amendment, I was quiet because I didn't own a
gun.
Now they've taken the First Amendment and I can't say anything.
__________________________________________________ ______________
YOU'RE PAYING TOO MUCH FOR THE INTERNET!
Juno now offers FREE Internet Access!
Try it today - there's no risk! For your FREE software, visit:
http://dl.www.juno.com/get/tagj.
------------------------------------------------------------------------
GET A NEXTCARD VISA, in 30 seconds! Get rates as low as 2.9%
Intro or 9.9% Fixed APR and no hidden fees. Apply NOW!
http://click.egroups.com/1/915/4/_/1966/_/951036429/
-- 20 megs of disk space in your group's Document Vault
-- http://www.egroups.com/docvault/az_vjc/?m=1
5805 From: Larry Maggio <lmaggio@p...>
Date: Sun Feb 20, 2000 0:46pm
Subject: Re: Directions to Broken Arrow
Jim,
The Broken Arrow trip was my idea. I was really hoping someone would step up
and lead the run as I dont have any experience leading a group. If no one
wants the position then I'll do the best job I can :)
Anyone wanting to caravan from Phx should meet at the SE Corner of Carefree
& I17... we will be departing there at 8:30am sharp. Hopefully, we can be at
the trailhead by 10:00 and start airing down and disconnecting. Anyone
coming from different areas can meet us there at that time. CB and FRS
channel
4...if you have either.
Broken Arrow Directions:
Head west on the Sedona exit of I-17. Keep heading though some town traffic
past Bell Rock and past the Poco Diablo resort. Look for the sign to Broken
Arrow Estates on Morgan Rd. It will be on your right hand side. The road is
paved for a half-mile and will then turn to dirt. About a 1/4 mile up is
where the trail begins.
Regards,
Larry
Eric,
Doesnt matter to me who you bring. Why might have to break into a few groups
if there is a large turnout.
----- Original Message -----
From: James A Langdon <yucca-man@j...>
To: <az_vjc@egroups.com>
Sent: Sunday, February 20, 2000 1:36 AM
Subject: [az_vjc] Directions to Broken Arrow
> Okay,
>
> One of the new members pointed out that I am not keeping up with the
> website with a 30-minute turnaround on updates. <G> One run that I have
> listed as upcoming is a Feb 26 run to Broken Arrow, but I have (again)
> lost the directions. Who is leading this run, and what are the
> directions for Broken Arrow and for the meeting spot? Is there any
> interest in having a convoy from the East Valley?
>
> Jim Yucca-man@j...
> Dirty 1/2 dozen - Arizona Virtual Jeep Club
> http://azvjc.web.com
> 89 Cherokee (RIP) 73 CJ5 (RIP)
>
> When they took the Fourth Amendment, I was quiet because I didn't deal
> drugs.
> When they took the Fifth Amendment, I was quiet because I was innocent.
> When they took the Second Amendment, I was quiet because I didn't own a
> gun.
> Now they've taken the First Amendment and I can't say anything.
> __________________________________________________ ______________
> YOU'RE PAYING TOO MUCH FOR THE INTERNET!
> Juno now offers FREE Internet Access!
> Try it today - there's no risk! For your FREE software, visit:
> http://dl.www.juno.com/get/tagj.
>
> ------------------------------------------------------------------------
> GET A NEXTCARD VISA, in 30 seconds! Get rates as low as 2.9%
> Intro or 9.9% Fixed APR and no hidden fees. Apply NOW!
> http://click.egroups.com/1/915/4/_/1966/_/951036429/
>
> -- 20 megs of disk space in your group's Document Vault
> -- http://www.egroups.com/docvault/az_vjc/?m=1
>
>
>
5806 From: Joe West <joefwest@h...>
Date: Sun Feb 20, 2000 8:00am
Subject: 5 on 4.5 to 5 on 5.5 wheel adaptor and Warn Full floater on a TJ
Greetings,
Can anyone point me in the right direction for an adaptor which will convert
5 on 4.5" wheels to 5 on 5.5" wheels?
Here's the reason I need them (and I know it sounds like a kludge, but
listen for a minute <smile>):
This week, I'll be converting my rear axle to 5 on 5.5" via a Warn full
floating kit. I had the Warn full floater 5 on 4.5" version, but broke 3
rear hubs. Warn was kind enough to allow me to send the 5 on 4.5 version
back and receive a 5 on 5.5" at no cost (Warn's warranty service has been
very good to me). I'll be installing the new Warn kit on Wednesday, and also
an ARB and 4.56:1 gears in my rear Dana 44. No problem right? Wrong!
I still have 5 on 4.5" in the front AND, I have a Dana 44 front axle coming
from Currie in two weeks (which will have the Warn 5 on 5.5" conversion
already installed). So... I can drive around with my new 35" Super Swamper
SSRs on the rear of the Jeep with my 33" BFG KOs on the front (no wheeling
obviously since my front axle has the factory 3.73:1 gears in it) and look
really stupid, OR I can find these wheel converters and use them for two
weeks until my Currie front axle comes in.
Can anyone suggest a manufacturer for these wheel adaptors or at least point
me in the right direction?
Thanks
Joe
__________________________________________________ ____
5807 From: <BigFlatFuzzyCows@a...>
Date: Sun Feb 20, 2000 11:42am
Subject: Re: Coves Cleanup
In a message dated 2/17/2000 5:02:47 PM US Mountain Standard Time,
jloveless@e... writes:
<< 8. I will post directions next week for anyone who hasn't been to the
Coves. (Is there anyone who hasn't been there?) >>
Yup! Haven't been there. :) How do we get there?
Christi & Ken. =)
5808 From: <CoyotEddie@a...>
Date: Sun Feb 20, 2000 11:51am
Subject: Re: 5 on 4.5 to 5 on 5.5 wheel adaptor and Warn Full floater on a TJ
<A HREF="http://www.salesco.com/wheels/adapters.htm">wheel adapters, WHEEL
ADAPTERS</A>
<A HREF="http://res3.geocities.com/~atheena/Maidens/Totems/coyote.html">The
Coyote</A>
5809 From: Joe F. West <joewest2@h...>
Date: Sun Feb 20, 2000 3:41pm
Subject: No Subject
Can anyone point me in the right direction for an adaptor which will convert
5 on 4.5" wheels to 5 on 5.5" wheels?
Here's the reason I need them (and I know it sounds like a kludge, but
listen for a minute <smile>):
This week, I'll be converting my rear axle to 5 on 5.5" via a Warn full
floating kit. I had the Warn full floater 5 on 4.5" version, but broke 3
rear hubs. Warn was kind enough to allow me to send the 5 on 4.5 version
back and receive a 5 on 5.5" at no cost (Warn's warranty service has been
very good to me). I'll be installing the new Warn kit on Wednesday, and also
an ARB and 4.56:1 gears in my rear Dana 44. No problem right? Wrong!
I still have 5 on 4.5" in the front AND, I have a Dana 44 front axle coming
from Currie in two weeks (which will have the Warn 5 on 5.5" conversion
already installed). So... I can drive around with my new 35" Super Swamper
SSRs on the rear of the Jeep with my 33" BFG KOs on the front (no wheeling
obviously since my front axle has the factory 3.73:1 gears in it) and look
really stupid, OR I can find these wheel converters and use them for two
weeks until my Currie front axle comes in.
Can anyone suggest a manufacturer for these wheel adaptors or at least point
me in the right direction?
Thanks
Joe
Joe F. West
98TJ Completely Stock, Not an aftermarket part on it.
http://members.home.com/joewest2/
(Okay... so I lied) <grin>
5810 From: Jay Eller <four_by_nut@n...>
Date: Sun Feb 20, 2000 7:57pm
Subject: Re: TR: Terminator
I too had a great time on Terminator. Sitting at home, I wish I had tried
to join Mike on the run of upper Raw Deal afterwards. Maybe next time.....
Anyway, I have posted one picture for now just to wet your appetites for
what is to come. (Mike, I think you will like this one) Go to:
http://albums.photopoint.com/j/ViewPhoto?u=189155&a=1921373&p=16711291
I have another 68 pictures to come from the digital camera, so stay tuned!!
It is about 7 meg worth of pics so I am going to wait to download them from
work on Tuesday where the T1 line is my friend. :-)))))
Talk to you all soon.
--
==============
Jay-Bird
http://www.goodnet.com/~eller
__________________________________________
NetZero - Defenders of the Free World
Get your FREE Internet Access and Email at
http://www.netzero.net/download/index.html
5811 From: DougB <azjeep@h...>
Date: Sun Feb 20, 2000 7:16pm
Subject: Re: TR: Terminator
Awesome flex!
----- Original Message -----
From: Jay Eller <four_by_nut@n...>
Cc: <az_vjc@eGroups.com>
Sent: Sunday, February 20, 2000 8:57 PM
Subject: [az_vjc] Re: TR: Terminator
> I too had a great time on Terminator. Sitting at home, I wish I had tried
> to join Mike on the run of upper Raw Deal afterwards. Maybe next
time.....
>
> Anyway, I have posted one picture for now just to wet your appetites for
> what is to come. (Mike, I think you will like this one) Go to:
>
> http://albums.photopoint.com/j/ViewPhoto?u=189155&a=1921373&p=16711291
>
> I have another 68 pictures to come from the digital camera, so stay
tuned!!
> It is about 7 meg worth of pics so I am going to wait to download them
from
> work on Tuesday where the T1 line is my friend. :-)))))
>
> Talk to you all soon.
> --
> ==============
> Jay-Bird
> http://www.goodnet.com/~eller
>
>
> __________________________________________
> NetZero - Defenders of the Free World
> Get your FREE Internet Access and Email at
> http://www.netzero.net/download/index.html
>
> ------------------------------------------------------------------------
> Learn more with SmartPlanet. It's a new way of learning online.
> SmartPlanet offers hundreds of courses to take on your time,
> in your space. Join for FREE today!
> http://click.egroups.com/1/1700/4/_/1966/_/951102141/
>
> -- Easily schedule meetings and events using the group calendar!
> -- http://www.egroups.com/cal?listname=az_vjc&m=1
>
>
5812 From: O'Boyle, David <David.OBoyle@b...>
Date: Sun Feb 20, 2000 7:15pm
Subject: Slave cylinder question
Does anyone know where I can get a heavy duty slave cylinder for my XJ?
Also if the carpet is torn where the clutch pedal usually hits the carpet
and the pedal is hitting the floor board will this cause over-extension of
the slave cylinder?
Thanks
Dave (azxj'less, agian)
5813 From: Eric Marble <EMarble3@p...>
Date: Sun Feb 20, 2000 6:25pm
Subject: Re: transfer case
If anyone needs a np231 transfer case, I hve one for sale..
not sure what one goes for now a days but make a offer.
5814 From: <gdclark@f...>
Date: Sun Feb 20, 2000 9:12pm
Subject: Re: TR: Terminator
"dougb" <azjee-@h...> wrote:
original article:http://www.egroups.com/group/az_vjc/?start=5811
Wait till you see pics of Mike trying
to imitate a turtle
This was an awesome trail, i had a great time
Jay can't wait to see the pics Jay
Greg
89yj
> Awesome flex!
>
> ----- Original Message -----
> From: Jay Eller <four_by_nut@n...>
> Cc: <az_vjc@eGroups.com>
> Sent: Sunday, February 20, 2000 8:57 PM
> Subject: [az_vjc] Re: TR: Terminator
>
>
> > I too had a great time on Terminator. Sitting at home, I wish I
had tried
> > to join Mike on the run of upper Raw Deal afterwards. Maybe next
> time.....
> >
> > Anyway, I have posted one picture for now just to wet your
appetites for
> > what is to come. (Mike, I think you will like this one) Go to:
> >
> > http://albums.photopoint.com/j/ViewPhoto?u=189155&a=1921373&p=16711
291
> >
> > I have another 68 pictures to come from the digital camera, so stay
> tuned!!
> > It is about 7 meg worth of pics so I am going to wait to download
them
> from
> > work on Tuesday where the T1 line is my friend. :-)))))
> >
> > Talk to you all soon.
> > --
> > ==============
> > Jay-Bird
> > http://www.goodnet.com/~eller
> >
> >
> > __________________________________________
> > NetZero - Defenders of the Free World
> > Get your FREE Internet Access and Email at
> > http://www.netzero.net/download/index.html
> >
5815 From: James A Langdon <yucca-man@j...>
Date: Sun Feb 20, 2000 11:20pm
Subject: Re: Slave cylinder question
Dave,
Sorry to hear about your ongoing troubles with your XJ. You know...I've
got a (supposedly) good driveline, and yours starts...together that's a
Jeep that might run!
From what I've seen of the master and slave cylinders, they have a lot
more movement available than the clutch pedal is capable of. However, I
was more concerned with the master cylinder when I looked into that
question, since mine had leaked and damaged my fusebox again. I don't
know of any 'heavy-duty' slave cylinders, but would recommend this as one
of those times to cough up the extra couple bucks to get new dealer parts
instead of rebuilt AutoClone stuff.
Jim Yucca-man@j...
Dirty 1/2 dozen - Arizona Virtual Jeep Club
http://azvjc.web.com
89 Cherokee (RIP) 73 CJ5 (RIP)
On Sun, 20 Feb 2000 20:15:04 -0700 "O'Boyle, David"
<David.OBoyle@b...> writes:
> Does anyone know where I can get a heavy duty slave cylinder for my
> XJ?
>
> Also if the carpet is torn where the clutch pedal usually hits the
> carpet
> and the pedal is hitting the floor board will this cause
> over-extension of
> the slave cylinder?
>
> Thanks
> Dave (azxj'less, agian)
__________________________________________________ ______________
YOU'RE PAYING TOO MUCH FOR THE INTERNET!
Juno now offers FREE Internet Access!
Try it today - there's no risk! For your FREE software, visit:
http://dl.www.juno.com/get/tagj.