PDA

View Full Version : WANTED: break speed bleeder



ShmUDE
06-11-2009, 06:12 PM
I need to bleed my brakes and the eaiser the better. If you want to come by and press on the petal while drinking beer thats fine by me. Looking to do this tonight.

Tom Schenk
06-11-2009, 08:07 PM
Autozone has bleeders with a check valve in them. They work well.

ademster
06-11-2009, 08:38 PM
how you plan to bleed the BRAKES with out the driver side front rubber line?

ShmUDE
06-12-2009, 07:19 AM
how you plan to bleed the BRAKES with out the driver side front rubber line?

well i was hoping to get that hose on my way down there but its a special order from the dealer :( no other place could even order it. So i'll be hitting the dealership today to probably spend way to much on a hose.

ademster
06-12-2009, 07:24 AM
Ty I can get one today let me know...

don_tlr
06-12-2009, 07:25 AM
Speed Bleeders Rock, Vatozone and NAPA will have them.

http://www.speedbleeder.com/images/sbani.gif

Why now get a braided line made somewhere?

I've got a stock front rubber line at home if that will help in any way, but I doubt it.

ademster
06-12-2009, 07:29 AM
Don, he is looking for the rubber line that goes to the caliper, metric banjo bolt at the caliper side and metric 8mm on the other.

them speed bleeders work great! BUT got to keep the dirt out of them otherwise they plug up the ball...

don_tlr
06-12-2009, 07:36 AM
I've got a rubber line off an 05 TJ, not sure what size the ends are and its most likely going to be too short.

I went to a speed shop near me in Co and they made me SS lines in 10 minutes.

ademster
06-12-2009, 07:51 AM
Actually yours will be WAY to long..

he has a center drop then hard line to both sides of the axle then a short 6 inch rubber line to the calipers.


Jeep brake line fittings are SAE he has Jap axles ( toyota ) so they are metric.

FourxDad
06-12-2009, 11:31 AM
Hey Ty, you going to be passing this way soon. I have someone else needing to repair some lines.

ademster
06-12-2009, 11:58 AM
He didn't do the line repairs, I did.

ShmUDE
06-12-2009, 12:54 PM
Hey Ty, you going to be passing this way soon. I have someone else needing to repair some lines.

yep, i'll drop off your stuff tonight or sunday. Or just give my number to whoever needs em and they can grab em.

DanFelix
06-12-2009, 12:54 PM
He didn't do the line repairs, I did.

You da man Adam!

ademster
06-12-2009, 01:01 PM
He didn't do the line repairs, I did.

with my flaring tool.

FourxDad
06-12-2009, 01:26 PM
Mine kinda old???????

ShmUDE
06-12-2009, 01:29 PM
Mine kinda old???????

he didn't even know i borrowed yours. He has his own set that he likes so he brought it.

ademster
06-12-2009, 01:52 PM
I thought he had rented a set...

I brought mine, works awesome. but thats if you remember to put the fitting on before you flare!!!!