blooddrive
01-09-2004, 05:32 AM
95472-95496
95472 From: Dan & Peggy Dennis <dannpegg@c...>
Date: Wed Dec 10, 2003 10:02am
Subject: Fw: failure notice
In my opinion, you should upgrade to 5.25" speakers in the dash. The oblong
4x6 stock speakers tend to distort due to the shape.
Just my .02
Dan
> --- In az_vjc@yahoogroups.com, "ScottG" <98tjgreen@c...> wrote:
> > Mike I still have original radio and speakers for 98 TJ should fit.
> Yours
> > for whatever you want to offer i.e... Beer Money, let me know if
> you still
> > want them.
> >
> > Scott G
> > 98tjgreen@c...
> > ----- Original Message -----
> > From: "Mike" <msa12171@a...>
> > To: <az_vjc@yahoogroups.com>
> > Sent: Tuesday, December 09, 2003 9:17 AM
> > Subject: [az_vjc] looking for stock TJ speakers
> >
> >
> > > I need the stock dash and soundbar speakers for a 97 TJ. If
> anyone
> > > has done A/M speakers and still has their factory ones laying
> around,
> > > please let me know. Thanks!
> > >
> > > Mike Anderson
> > > 602-321-7873
> > >
> > >
> > >
> > >
> > > Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
> > >
> > >
>
>
--------------------------------------------------------------------------------
ADVERTISEMENT
95473 From: Tony <axtell@c...>
Date: Wed Dec 10, 2003 1:05pm
Subject: RE: Bent Dana 30 Axle, need truss?
Have 4wheelers Supply custom build you a truss. They did mine for about
$200 I think it was.. They did an awesome job. Ask Rob for a quote in
the fab shop.
Tony Axtell 78CJ5
-----Original Message-----
From: clintltravis [mailto:clint_travis@m...]
Sent: Wednesday, December 10, 2003 12:50 PM
To: az_vjc@yahoogroups.com
Subject: [az_vjc] Bent Dana 30 Axle, need truss?
While having my fornt ARB seal replaced, Four Wheelers Supply
discovered that my front axle tube (Dana 30) on the drivers side is
bent. Four Wheelers Supply send it out and it is currently being
straitened.
From my research, this does not seem to be a real common problem. I
was wondering if anyone else has had this problem and if there is a
truss to keep it from happeing. Seems like there are plenty truss for
the rear axle (Dana 35) but nothing desent for a Dana 30. I am
thinking I may have to make a custom truss and weld it on.
Any comments welcome.
Clint
97 TJ Sahara
Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
95474 From: Chris Kilcullen <whoozey1953@y...>
Date: Wed Dec 10, 2003 11:59am
Subject: Re: Bent Dana 30 Axle, need truss?
Have you ever "jumped" your Jeep? The D30 is not prone to bending unless it has been subjected to this type of abuse. If you bought it used, no telling what the previous owner subjected it to.
clintltravis <clint_travis@m...> wrote:
While having my fornt ARB seal replaced, Four Wheelers Supply
discovered that my front axle tube (Dana 30) on the drivers side is
bent. Four Wheelers Supply send it out and it is currently being
straitened.
From my research, this does not seem to be a real common problem. I
was wondering if anyone else has had this problem and if there is a
truss to keep it from happeing. Seems like there are plenty truss for
the rear axle (Dana 35) but nothing desent for a Dana 30. I am
thinking I may have to make a custom truss and weld it on.
Any comments welcome.
Clint
97 TJ Sahara
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
---------------------------------
Do you Yahoo!?
New Yahoo! Photos - easier uploading and sharing
[Non-text portions of this message have been removed]
95475 From: brandonsxj <brandonhockey@c...>
Date: Wed Dec 10, 2003 1:08pm
Subject: Turn Signal Problem
This morning I went to turn left and realized that when I turn the
signal on it lights up but doesnt blink. It doesn't blink outside
either it just lights up and stays on until you cancel the signal.
Also it only occurs on the left side, the right is fine. Any ideas
on what this could be? Thank you for any suggestions. Brandon
95476 From: intertwingled <intertwingled@q...>
Date: Wed Dec 10, 2003 1:20pm
Subject: Re: Turn Signal Problem
Usually means that one of the turn signal bulbs is burned out. Have you
tried your emergency blinkers?
Tony
brandonsxj wrote:
>This morning I went to turn left and realized that when I turn the
>signal on it lights up but doesnt blink. It doesn't blink outside
>either it just lights up and stays on until you cancel the signal.
>Also it only occurs on the left side, the right is fine. Any ideas
>on what this could be? Thank you for any suggestions. Brandon
>
>
>
>
>Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
>
>
>
95477 From: airmenjames <airmenjames@y...>
Date: Wed Dec 10, 2003 0:15pm
Subject: TJ Light Bar
I've stripped out 3 of the 4 screws that are supposed to come out in
order to install my light bar. I tried to drill one out... somewhat
unsuccessfully. Does anyone have a tap and die set and maybe a
couple hours on saturday, willing to help a younger guy out with
something he's not done before. Ha!. I've only had my Jeep for 4
weeks and I'm loving it. Can't wait to get roading with more Jeepers.
95478 From: GP <grantepearson@c...>
Date: Wed Dec 10, 2003 0:35pm
Subject: [FS] Rancho 3" XJ coil springs
Went to a higher RE lift recently, would like to get these coils out of the
garage. They are still in good shape and ride great. $50
Grant
95479 From: jeepin_in_az <jeepin_in_az@y...>
Date: Wed Dec 10, 2003 2:04pm
Subject: [OT] - Programmer needed.
Sorry for OT, but jobs are hard to come by these days.
A company located in the Scotts Airpark is looking for a temp-to-hire
programmer. Needs Perl, PHP, MySQL, etc. Pay is not "great", but
not that low.
If you are interested, shoot me an e-mail and I will forward you the
name of the agency looking.
This is going through a temp agency, I work for them.
Mike Baney
95480 From: Jim <jishby@m...>
Date: Wed Dec 10, 2003 2:25pm
Subject: Crown King
Can anyone who has run the backway to Crown King lately, tell me if
you can get a full size longbed p/u thru. Thanks in advance,
Jim
95481 From: Frank BadAZXJ <BadAZXJ@h...>
Date: Wed Dec 10, 2003 3:04pm
Subject: Re: Bent Dana 30 Axle, need truss?
mine bent too...and I baby my jeep :P
Frank
groups.msn.com/badazxj
--- In az_vjc@yahoogroups.com, Chris Kilcullen <whoozey1953@y...>
wrote:
> Have you ever "jumped" your Jeep? The D30 is not prone to bending
unless it has been subjected to this type of abuse. If you bought it
used, no telling what the previous owner subjected it to.
>
>
> clintltravis <clint_travis@m...> wrote:
> While having my fornt ARB seal replaced, Four Wheelers Supply
> discovered that my front axle tube (Dana 30) on the drivers side is
> bent. Four Wheelers Supply send it out and it is currently being
> straitened.
>
> From my research, this does not seem to be a real common problem. I
> was wondering if anyone else has had this problem and if there is a
> truss to keep it from happeing. Seems like there are plenty truss
for
> the rear axle (Dana 35) but nothing desent for a Dana 30. I am
> thinking I may have to make a custom truss and weld it on.
>
> Any comments welcome.
>
> Clint
> 97 TJ Sahara
>
>
>
>
> Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
>
>
>
> ---------------------------------
> Do you Yahoo!?
> New Yahoo! Photos - easier uploading and sharing
>
> [Non-text portions of this message have been removed]
95482 From: Mike Baney <jeepin_in_az@y...>
Date: Wed Dec 10, 2003 3:21pm
Subject: Re: [OT] - Programmer needed.
Who mentioned $5.00 an hour??
If you are really interested in how much the pay is, e-mail me offline.
Mike
--- intertwingled <intertwingled@q...> wrote:
> No. On the other hand, I am not going to work for $5 per hour to
> program in Perl or PHP, either. =P
>
> Tony
>
> Mike Baney wrote:
>
> >Why outsource it to India? Do you want your job to be outsourced?
> >
> >Mike
> >
> >
> >--- intertwingled <intertwingled@q...> wrote:
> >
> >
> >>Well, you get what you pay for. Better outsource it to India. ;-)
> >>
> >>jeepin_in_az wrote:
> >>
> >>
> >>
> >>>Sorry for OT, but jobs are hard to come by these days.
> >>>
> >>>A company located in the Scotts Airpark is looking for a temp-to-hire
>
> >>>programmer. Needs Perl, PHP, MySQL, etc. Pay is not "great", but
> >>>not that low.
> >>>
> >>>If you are interested, shoot me an e-mail and I will forward you the
> >>>name of the agency looking.
> >>>
> >>>This is going through a temp agency, I work for them.
> >>>
> >>>Mike Baney
> >>>
> >>>
> >>>
> >>>
> >>>Your use of Yahoo! Groups is subject to
> >>>
> >>>
> >>http://docs.yahoo.com/info/terms/
> >>
> >>
> >>>
> >>>
> >>>
> >>>
> >>>
> >>>
> >>
> >>
> >
> >
> >__________________________________
> >Do you Yahoo!?
> >Protect your identity with Yahoo! Mail AddressGuard
> >http://antispam.yahoo.com/whatsnewfree
> >
> >
> >
> >
>
>
__________________________________
Do you Yahoo!?
New Yahoo! Photos - easier uploading and sharing.
http://photos.yahoo.com/
95483 From: AzVJC Website <azvjc@a...>
Date: Wed Dec 10, 2003 3:18pm
Subject: [TR] Land Use Meeting - Thursday, December 11, 2003 - Reminder
Hello All,Jim Florence is leading a Land Use Meeting trail run on Thursday, December 11, 2003.<br><br>When: 6:00 PM to 9:00 PM
Where: MGCP<br>
December 11, 2003<br>
6:00 p.m. to 9:00 p.m.<br>
National Guard Armory<br>
52nd Street and McDowell<br>
<br>
The National Guard Building is located at the NE corner of 52nd St. and<br>
McDowel Road, in Phoenix. The entrance is at the light signal, midway<br>
between 52nd St and 64th St/Galvin Parkway.<br>
<br>
Turn north at the light into the Guard Station. They will ask to see a<br>
photo ID. Lt. Col. Doug Larson will have notified them of the<br>
meeting...............<br>
<br>
Ask them for directions to BLDG. 101<br>
<br>
Enter the Rotunda.<br>
<br>
The Auditorium is on the south side.<br>
Rating: 2.0-
Length:
CB Channel:
MGCP Members,<br>
<br>
MARK YOUR CALENDARS!!!<br>
<br>
As announced several months ago the next few months of the MGCP meetings<br>
will rotate from north to south (Phoenix to Tucson) and will be evening<br>
meetings in the local areas. We hope this schedule will enable those that<br>
have been unable to make it to Florence during regular working hours to be<br>
involved in the happenings in the Florence Junction area land planning<br>
partnership.<br>
<br>
We've plowed through the Vision and Mission Statements, the objectives and<br>
goals and are now on a roll towards beginning implementation of the plans<br>
we've all worked towards for three years.<br>
<br>
BLM will have the inventory maps of the MGCP Pilot area available for<br>
verification of trails and areas of concern. Although the non-motorized<br>
trails are not indicated on this particular map we need to identify<br>
non-motorized trails along with motorized trails. Also the Great Western<br>
Trail and issues with it will be discussed. There will be discussions<br>
regarding a trails plan on the State Trust Lands on the west side of this<br>
area.<br>
This is used to add Land Use Meetings to the AzVJC Events List.
http://www.azvjc.org/default.asp?A=1&ID=1092
Click the link above To Add Your Name to the Sign Up List
Thank You,
- The AzVJC Website
95484 From: rolled1000 <rolled1@c...>
Date: Wed Dec 10, 2003 3:36pm
Subject: Roll Bar
I'm in need of a stock roll bar for a 99 TJ. Anyone know where I can
pick one up?
TIA
Terry
95485 From: GP <grantepearson@c...>
Date: Wed Dec 10, 2003 0:27pm
Subject: [FS] CJ Power Steering Box - Good for core
I have a Saginaw PS box from an 82 CJ8 taking up space on my workbench.
Would be good for a core for anyone doing a PS conversion. Get it out of my
garage! Email if interested. Thanks.
Grant
95486 From: Ruben Aviles <azjeeper@h...>
Date: Wed Dec 10, 2003 5:37pm
Subject: member sighting
A dark green TJ w/rock ready system (from what it looked like) getting on
the freeway from 32nd Street going west. Sweet rig man. I was in front of
you in the copper colored TJ. Wasn't sure if you saw me wave. Here you go.
>From: az_vjc@yahoogroups.com
>Reply-To: az_vjc@yahoogroups.com
>To: az_vjc@yahoogroups.com
>Subject: [az_vjc] Digest Number 4172
>Date: 10 Dec 2003 21:22:40 -0000
>
>There are 12 messages in this issue.
>
>Topics in this digest:
>
> 1. RE: Someting wrong with rear end/locker?
> From: "Kevin Gallagher" <GIThunder81@c...>
> 2. Re: CJ tranny
> From: "Linda" <minihummer@w...>
> 3. Re: Any unclaimed prizes from the BBQ-i.e. ME......LOL
> From: NVRSTUKXJ@a...
> 4. Looking for a DEAD Jeep Automatic Tranny either 999 or 727
> From: rokkcrawler@a...
> 5. Bent Dana 30 Axle, need truss?
> From: "clintltravis" <clint_travis@m...>
> 6. Reply to Jamie for a T18
> From: "Vernelle Massey" <vernellem@c...>
> 7. Fw: failure notice
> From: "Dan & Peggy Dennis" <dannpegg@c...>
> 8. RE: Bent Dana 30 Axle, need truss?
> From: "Tony" <axtell@c...>
> 9. Re: Bent Dana 30 Axle, need truss?
> From: Chris Kilcullen <whoozey1953@y...>
> 10. Turn Signal Problem
> From: "brandonsxj" <brandonhockey@c...>
> 11. Re: Turn Signal Problem
> From: "intertwingled" <intertwingled@q...>
> 12. TJ Light Bar
> From: "airmenjames" <airmenjames@y...>
>
>
>__________________________________________________ ______________________
>__________________________________________________ ______________________
>
>Message: 1
> Date: Wed, 10 Dec 2003 10:19:29 -0800
> From: "Kevin Gallagher" <GIThunder81@c...>
>Subject: RE: Someting wrong with rear end/locker?
>
>Marty,
>
> Welcome to the no slip locker club! LOL.... Don't worry I have
>the same problems I was once told its because the axle is twisting side
>to side under the jeep and that's why it does it. I was worried with
>mine at first but youll get used to it. If you have any more questions
>drop me a line.
>
>Kevin Gallagher
>"Make it Fit!"
>
>
>-----Original Message-----
>From: Marty [mailto:robatari@y...]
>Sent: Tuesday, December 09, 2003 1:14 PM
>To: azvjc
>Subject: [az_vjc] Someting wrong with rear end/locker?
>
> About 2 weeks ago I installed a no-slip in the rear
>of my 98 tj d35 every thing seemed to go well and it
>tested fine.I noticed a little bit of a lean to
>passenger when taking off,I think that might be
>normal.
>Today I made a sharp left from a stop and it felt like
>my left rear tire/rear end came off the ground and I
>had a enough lean to passenger to give me a bit of a
>scare. I tried it a few more times and it only happens
>on sharp left turns.I've got a 4" lift w/stock arms
>and rear track bar bracket.Any Ideas what would cause
>this.
> Thanks Marty
>
>
>__________________________________
>Do you Yahoo!?
>New Yahoo! Photos - easier uploading and sharing.
>http://photos.yahoo.com/
>
>
>
>Your use of Yahoo! Groups is subject to
>http://docs.yahoo.com/info/terms/
>
>
>
>
>
>
>__________________________________________________ ______________________
>__________________________________________________ ______________________
>
>Message: 2
> Date: Wed, 10 Dec 2003 19:03:36 -0000
> From: "Linda" <minihummer@w...>
>Subject: Re: CJ tranny
>
>I have a T18A sitting in the barn. It's a long shaft model from a
>1980 J20 truck. 93k miles on it. Converting it to a short shaft is
>essentially a rebuild. $200 takes it.
>
>Linda
>54 wagon
>
>--- In az_vjc@yahoogroups.com, "jquise2423" <jquise2423@a...> wrote:
> > Looking for a T18 transmission for my CJ. Does anyone know of a
>good
> > source for one.
> > Jamie
>
>
>
>__________________________________________________ ______________________
>__________________________________________________ ______________________
>
>Message: 3
> Date: Wed, 10 Dec 2003 13:23:42 -0500
> From: NVRSTUKXJ@a...
>Subject: Re: Any unclaimed prizes from the BBQ-i.e. ME......LOL
>
>your name got pulled a couple of times, but we kept putting it back and
>selecting someone else..... :-)
>
>
>__________________________________________________ ______________________
>__________________________________________________ ______________________
>
>Message: 4
> Date: Wed, 10 Dec 2003 12:40:18 EST
> From: rokkcrawler@a...
>Subject: Looking for a DEAD Jeep Automatic Tranny either 999 or 727
>
>Anyone have a "DEAD" TF999 or TF727 for a Jeep they want to get rid of
>?????
> If it has linkage that would even be better. Email me off post please.
>
>TIA
>
>
>[Non-text portions of this message have been removed]
>
>
>
>__________________________________________________ ______________________
>__________________________________________________ ______________________
>
>Message: 5
> Date: Wed, 10 Dec 2003 19:50:23 -0000
> From: "clintltravis" <clint_travis@m...>
>Subject: Bent Dana 30 Axle, need truss?
>
>While having my fornt ARB seal replaced, Four Wheelers Supply
>discovered that my front axle tube (Dana 30) on the drivers side is
>bent. Four Wheelers Supply send it out and it is currently being
>straitened.
>
>From my research, this does not seem to be a real common problem. I
>was wondering if anyone else has had this problem and if there is a
>truss to keep it from happeing. Seems like there are plenty truss for
>the rear axle (Dana 35) but nothing desent for a Dana 30. I am
>thinking I may have to make a custom truss and weld it on.
>
>Any comments welcome.
>
>Clint
>97 TJ Sahara
>
>
>
>__________________________________________________ ______________________
>__________________________________________________ ______________________
>
>Message: 6
> Date: Wed, 10 Dec 2003 19:25:11 -0000
> From: "Vernelle Massey" <vernellem@c...>
>Subject: Reply to Jamie for a T18
>
>Hi Jamie,
>Call my son Jon Massey. He has one that is worth $1150.00 and he will
>entertain a reasonable offer. It is complete, with bell housing to
>transfer case. He will be at 623-583-1787, for about 5 more minutes.
>After 1:00 he'll be at 623-931-7775. After 8:00 PM 623-815-1088.
>
>
>
>__________________________________________________ ______________________
>__________________________________________________ ______________________
>
>Message: 7
> Date: Wed, 10 Dec 2003 11:02:13 -0700
> From: "Dan & Peggy Dennis" <dannpegg@c...>
>Subject: Fw: failure notice
>
> In my opinion, you should upgrade to 5.25" speakers in the dash. The
>oblong
>4x6 stock speakers tend to distort due to the shape.
>
> Just my .02
>
> Dan
>
> > --- In az_vjc@yahoogroups.com, "ScottG" <98tjgreen@c...> wrote:
> > > Mike I still have original radio and speakers for 98 TJ should fit.
> > Yours
> > > for whatever you want to offer i.e... Beer Money, let me know if
> > you still
> > > want them.
> > >
> > > Scott G
> > > 98tjgreen@c...
> > > ----- Original Message -----
> > > From: "Mike" <msa12171@a...>
> > > To: <az_vjc@yahoogroups.com>
> > > Sent: Tuesday, December 09, 2003 9:17 AM
> > > Subject: [az_vjc] looking for stock TJ speakers
> > >
> > >
> > > > I need the stock dash and soundbar speakers for a 97 TJ. If
> > anyone
> > > > has done A/M speakers and still has their factory ones laying
> > around,
> > > > please let me know. Thanks!
> > > >
> > > > Mike Anderson
> > > > 602-321-7873
> > > >
> > > >
> > > >
> > > >
> > > > Your use of Yahoo! Groups is subject to
> > http://docs.yahoo.com/info/terms/
> > > >
> > > >
> >
> >
>
>
>
>__________________________________________________ ______________________
>__________________________________________________ ______________________
>
>Message: 8
> Date: Wed, 10 Dec 2003 14:05:34 -0700
> From: "Tony" <axtell@c...>
>Subject: RE: Bent Dana 30 Axle, need truss?
>
>Have 4wheelers Supply custom build you a truss. They did mine for about
>$200 I think it was.. They did an awesome job. Ask Rob for a quote in
>the fab shop.
>
>Tony Axtell 78CJ5
>
>-----Original Message-----
>From: clintltravis [mailto:clint_travis@m...]
>Sent: Wednesday, December 10, 2003 12:50 PM
>To: az_vjc@yahoogroups.com
>Subject: [az_vjc] Bent Dana 30 Axle, need truss?
>
>While having my fornt ARB seal replaced, Four Wheelers Supply
>discovered that my front axle tube (Dana 30) on the drivers side is
>bent. Four Wheelers Supply send it out and it is currently being
>straitened.
>
>From my research, this does not seem to be a real common problem. I
>was wondering if anyone else has had this problem and if there is a
>truss to keep it from happeing. Seems like there are plenty truss for
>the rear axle (Dana 35) but nothing desent for a Dana 30. I am
>thinking I may have to make a custom truss and weld it on.
>
>Any comments welcome.
>
>Clint
>97 TJ Sahara
>
>
>
>
>Your use of Yahoo! Groups is subject to
>http://docs.yahoo.com/info/terms/
>
>
>
>
>__________________________________________________ ______________________
>__________________________________________________ ______________________
>
>Message: 9
> Date: Wed, 10 Dec 2003 11:59:44 -0800 (PST)
> From: Chris Kilcullen <whoozey1953@y...>
>Subject: Re: Bent Dana 30 Axle, need truss?
>
>Have you ever "jumped" your Jeep? The D30 is not prone to bending unless it
>has been subjected to this type of abuse. If you bought it used, no telling
>what the previous owner subjected it to.
>
>
>clintltravis <clint_travis@m...> wrote:
>While having my fornt ARB seal replaced, Four Wheelers Supply
>discovered that my front axle tube (Dana 30) on the drivers side is
>bent. Four Wheelers Supply send it out and it is currently being
>straitened.
>
>From my research, this does not seem to be a real common problem. I
>was wondering if anyone else has had this problem and if there is a
>truss to keep it from happeing. Seems like there are plenty truss for
>the rear axle (Dana 35) but nothing desent for a Dana 30. I am
>thinking I may have to make a custom truss and weld it on.
>
>Any comments welcome.
>
>Clint
>97 TJ Sahara
>
>
>
>
>Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
>---------------------------------
>Do you Yahoo!?
>New Yahoo! Photos - easier uploading and sharing
>
>[Non-text portions of this message have been removed]
>
>
>
>__________________________________________________ ______________________
>__________________________________________________ ______________________
>
>Message: 10
> Date: Wed, 10 Dec 2003 21:08:17 -0000
> From: "brandonsxj" <brandonhockey@c...>
>Subject: Turn Signal Problem
>
>This morning I went to turn left and realized that when I turn the
>signal on it lights up but doesnt blink. It doesn't blink outside
>either it just lights up and stays on until you cancel the signal.
>Also it only occurs on the left side, the right is fine. Any ideas
>on what this could be? Thank you for any suggestions. Brandon
>
>
>
>__________________________________________________ ______________________
>__________________________________________________ ______________________
>
>Message: 11
> Date: Wed, 10 Dec 2003 14:20:23 -0700
> From: "intertwingled" <intertwingled@q...>
>Subject: Re: Turn Signal Problem
>
>Usually means that one of the turn signal bulbs is burned out. Have you
>tried your emergency blinkers?
>
>Tony
>
>brandonsxj wrote:
>
> >This morning I went to turn left and realized that when I turn the
> >signal on it lights up but doesnt blink. It doesn't blink outside
> >either it just lights up and stays on until you cancel the signal.
> >Also it only occurs on the left side, the right is fine. Any ideas
> >on what this could be? Thank you for any suggestions. Brandon
> >
> >
> >
> >
> >Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
> >
> >
> >
> >
> >
> >
>
>
>
>
>__________________________________________________ ______________________
>__________________________________________________ ______________________
>
>Message: 12
> Date: Wed, 10 Dec 2003 20:15:45 -0000
> From: "airmenjames" <airmenjames@y...>
>Subject: TJ Light Bar
>
>I've stripped out 3 of the 4 screws that are supposed to come out in
>order to install my light bar. I tried to drill one out... somewhat
>unsuccessfully. Does anyone have a tap and die set and maybe a
>couple hours on saturday, willing to help a younger guy out with
>something he's not done before. Ha!. I've only had my Jeep for 4
>weeks and I'm loving it. Can't wait to get roading with more Jeepers.
>
>
>
>__________________________________________________ ______________________
>__________________________________________________ ______________________
>
>
>
>Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
__________________________________________________ _______________
Winterize your home with tips from MSN House & Home.
http://special.msn.com/home/warmhome.armx
95487 From: Dan Dennis <dannpegg@c...>
Date: Wed Dec 10, 2003 1:32pm
Subject: Re: looking for stock TJ speakers (WAS: failure notice)
Oops...Forgot to change the subject...
Dan
--- In az_vjc@yahoogroups.com, "Dan & Peggy Dennis" <dannpegg@c...>
wrote:
> In my opinion, you should upgrade to 5.25" speakers in the dash.
The oblong
> 4x6 stock speakers tend to distort due to the shape.
>
> Just my .02
>
> Dan
>
> > --- In az_vjc@yahoogroups.com, "ScottG" <98tjgreen@c...> wrote:
> > > Mike I still have original radio and speakers for 98 TJ should
fit.
> > Yours
> > > for whatever you want to offer i.e... Beer Money, let me know if
> > you still
> > > want them.
> > >
> > > Scott G
> > > 98tjgreen@c...
> > > ----- Original Message -----
> > > From: "Mike" <msa12171@a...>
> > > To: <az_vjc@yahoogroups.com>
> > > Sent: Tuesday, December 09, 2003 9:17 AM
> > > Subject: [az_vjc] looking for stock TJ speakers
> > >
> > >
> > > > I need the stock dash and soundbar speakers for a 97 TJ. If
> > anyone
> > > > has done A/M speakers and still has their factory ones laying
> > around,
> > > > please let me know. Thanks!
> > > >
> > > > Mike Anderson
> > > > 602-321-7873
> > > >
> > > >
> > > >
> > > >
> > > > Your use of Yahoo! Groups is subject to
> > http://docs.yahoo.com/info/terms/
> > > >
> > > >
> >
> >
95488 From: Mike Baney <jeepin_in_az@y...>
Date: Wed Dec 10, 2003 2:58pm
Subject: Re: [OT] - Programmer needed.
Why outsource it to India? Do you want your job to be outsourced?
Mike
--- intertwingled <intertwingled@q...> wrote:
> Well, you get what you pay for. Better outsource it to India. ;-)
>
> jeepin_in_az wrote:
>
> >Sorry for OT, but jobs are hard to come by these days.
> >
> >A company located in the Scotts Airpark is looking for a temp-to-hire
> >programmer. Needs Perl, PHP, MySQL, etc. Pay is not "great", but
> >not that low.
> >
> >If you are interested, shoot me an e-mail and I will forward you the
> >name of the agency looking.
> >
> >This is going through a temp agency, I work for them.
> >
> >Mike Baney
> >
> >
> >
> >
> >Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
> >
> >
> >
> >
> >
> >
>
>
__________________________________
Do you Yahoo!?
Protect your identity with Yahoo! Mail AddressGuard
http://antispam.yahoo.com/whatsnewfree
95489 From: DesertJeep <joey@d...>
Date: Wed Dec 10, 2003 6:29pm
Subject: RE: Crown King
LOL you can get your moms Lincon Towncar up to CK with the right winch and
towstrap. :) Is it 4wd? High clearance? You will need some clearence to get
to CK at a minumum. The lower the vehicle the more problems and the longer
it will take.
Joey K
http://www.desertjeep.com
93YJ
-----Original Message-----
From: Jim [mailto:jishby@m...]
Sent: Wednesday, December 10, 2003 3:25 PM
To: az_vjc@yahoogroups.com
Subject: [az_vjc] Crown King
Can anyone who has run the backway to Crown King lately, tell me if you can
get a full size longbed p/u thru. Thanks in advance,
Jim
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
95490 From: DesertJeep <joey@d...>
Date: Wed Dec 10, 2003 6:25pm
Subject: RE: TJ Light Bar
What side of town are you on?
Joey K
http://www.desertjeep.com
93YJ
-----Original Message-----
From: airmenjames [mailto:airmenjames@y...]
Sent: Wednesday, December 10, 2003 1:16 PM
To: az_vjc@yahoogroups.com
Subject: [az_vjc] TJ Light Bar
I've stripped out 3 of the 4 screws that are supposed to come out in order
to install my light bar. I tried to drill one out... somewhat
unsuccessfully. Does anyone have a tap and die set and maybe a couple hours
on saturday, willing to help a younger guy out with something he's not done
before. Ha!. I've only had my Jeep for 4 weeks and I'm loving it. Can't
wait to get roading with more Jeepers.
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
95491 From: intertwingled <intertwingled@q...>
Date: Wed Dec 10, 2003 2:09pm
Subject: Re: [OT] - Programmer needed.
Well, you get what you pay for. Better outsource it to India. ;-)
jeepin_in_az wrote:
>Sorry for OT, but jobs are hard to come by these days.
>
>A company located in the Scotts Airpark is looking for a temp-to-hire
>programmer. Needs Perl, PHP, MySQL, etc. Pay is not "great", but
>not that low.
>
>If you are interested, shoot me an e-mail and I will forward you the
>name of the agency looking.
>
>This is going through a temp agency, I work for them.
>
>Mike Baney
>
>
>
>
>Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
>
>
>
95492 From: intertwingled <intertwingled@q...>
Date: Wed Dec 10, 2003 3:11pm
Subject: Re: [OT] - Programmer needed.
No. On the other hand, I am not going to work for $5 per hour to
program in Perl or PHP, either. =P
Tony
Mike Baney wrote:
>Why outsource it to India? Do you want your job to be outsourced?
>
>Mike
>
>
>--- intertwingled <intertwingled@q...> wrote:
>
>
>>Well, you get what you pay for. Better outsource it to India. ;-)
>>
>>jeepin_in_az wrote:
>>
>>
>>
>>>Sorry for OT, but jobs are hard to come by these days.
>>>
>>>A company located in the Scotts Airpark is looking for a temp-to-hire
>>>programmer. Needs Perl, PHP, MySQL, etc. Pay is not "great", but
>>>not that low.
>>>
>>>If you are interested, shoot me an e-mail and I will forward you the
>>>name of the agency looking.
>>>
>>>This is going through a temp agency, I work for them.
>>>
>>>Mike Baney
>>>
>>>
>>>
>>>
>>>Your use of Yahoo! Groups is subject to
>>>
>>>
>>http://docs.yahoo.com/info/terms/
>>
>>
>>>
>>>
>>>
>>>
>>>
>>>
>>
>>
>
>
>__________________________________
>Do you Yahoo!?
>Protect your identity with Yahoo! Mail AddressGuard
>http://antispam.yahoo.com/whatsnewfree
>
>
>
>
95493 From: Bill LaBrie <mrbuttz@h...>
Date: Wed Dec 10, 2003 6:48pm
Subject: RE: Crown King
During our October poker run, had a couple of Chevy long-beds (in addition
to a 4Runner, a YJ, a CJ, several TJ's, and my ZJ). No problems to speak of,
but they were running lifts. Kind of pointless for them to take any of the
more extreme sections--they only burn tread and break parts. The go-arounds
were no problem, however.
Jeeps just flat rule. :-) You heard it here.
>From: "DesertJeep" <joey@d...>
>Reply-To: <joey@d...>
>To: "'Jim'" <jishby@m...>,<az_vjc@yahoogroups.com>
>Subject: RE: [az_vjc] Crown King
>Date: Wed, 10 Dec 2003 19:29:20 -0700
>
>LOL you can get your moms Lincon Towncar up to CK with the right winch and
>towstrap. :) Is it 4wd? High clearance? You will need some clearence to get
>to CK at a minumum. The lower the vehicle the more problems and the longer
>it will take.
>
>
>Joey K
>http://www.desertjeep.com
>93YJ
>
>
>-----Original Message-----
>From: Jim [mailto:jishby@m...]
>Sent: Wednesday, December 10, 2003 3:25 PM
>To: az_vjc@yahoogroups.com
>Subject: [az_vjc] Crown King
>
>Can anyone who has run the backway to Crown King lately, tell me if you can
>get a full size longbed p/u thru. Thanks in advance,
>
>Jim
>
>
>
>
>Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
>
>
>Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
__________________________________________________ _______________
Don’t worry if your Inbox will max out while you are enjoying the holidays.
Get MSN Extra Storage! http://join.msn.com/?PAGE=features/es
95494 From: jaylalib <jaylalib1@c...>
Date: Wed Dec 10, 2003 8:31pm
Subject: Re: I'm a dad!!!
CONGRATS!!!!
Hope you guys are doing well. It is an amazing experience!
Jason
--- In az_vjc@yahoogroups.com, Wade Ungaro <swaders7@y...> wrote:
> Hey everyone,
>
> I just wanted to let you know that I've been in the hospital since
Saturday with my wife, Sarah. We came home yesterday with our new
baby girl, Sedona Joy Ungaro. She was 6 lbs 15 oz and 20 in long.
Everything went smooth on 12-6-3 and everyone is completely healthy.
Here's a few links to pictures so everyone can see our beautiful
little girl.
>
>
http://img4.photobucket.com/albums/0803/swaders7/Sedona/Image062.jpg
>
http://img4.photobucket.com/albums/0803/swaders7/Sedona/Image063.jpg
>
http://img4.photobucket.com/albums/0803/swaders7/Sedona/Image064.jpg
>
>
> ~Wade
>
>
>
>
> ~Wade
> '97 "Blue Cactus" TJ
> http://members.ebay.com/aboutme/swaders7/
> http://www.theungaros.com
> http://www.azvjc.org
>
>
> ---------------------------------
> Do you Yahoo!?
> New Yahoo! Photos - easier uploading and sharing
>
> [Non-text portions of this message have been removed]
95495 From: jeff misischia <g4mannn@y...>
Date: Wed Dec 10, 2003 6:33pm
Subject: Re: Crown King
i wouldnt try...........
--- Jim <jishby@m...> wrote:
> Can anyone who has run the backway to Crown King
> lately, tell me if
> you can get a full size longbed p/u thru. Thanks in
> advance,
>
> Jim
>
>
>
>
> Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
>
>
__________________________________
Do you Yahoo!?
Protect your identity with Yahoo! Mail AddressGuard
http://antispam.yahoo.com/whatsnewfree
95496 From: David Cole <lists@o...>
Date: Wed Dec 10, 2003 9:36pm
Subject: table mesa maps
Is there a state or BLM office in the East Valley that contains maps of the
Table Mesa area?
David
95472 From: Dan & Peggy Dennis <dannpegg@c...>
Date: Wed Dec 10, 2003 10:02am
Subject: Fw: failure notice
In my opinion, you should upgrade to 5.25" speakers in the dash. The oblong
4x6 stock speakers tend to distort due to the shape.
Just my .02
Dan
> --- In az_vjc@yahoogroups.com, "ScottG" <98tjgreen@c...> wrote:
> > Mike I still have original radio and speakers for 98 TJ should fit.
> Yours
> > for whatever you want to offer i.e... Beer Money, let me know if
> you still
> > want them.
> >
> > Scott G
> > 98tjgreen@c...
> > ----- Original Message -----
> > From: "Mike" <msa12171@a...>
> > To: <az_vjc@yahoogroups.com>
> > Sent: Tuesday, December 09, 2003 9:17 AM
> > Subject: [az_vjc] looking for stock TJ speakers
> >
> >
> > > I need the stock dash and soundbar speakers for a 97 TJ. If
> anyone
> > > has done A/M speakers and still has their factory ones laying
> around,
> > > please let me know. Thanks!
> > >
> > > Mike Anderson
> > > 602-321-7873
> > >
> > >
> > >
> > >
> > > Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
> > >
> > >
>
>
--------------------------------------------------------------------------------
ADVERTISEMENT
95473 From: Tony <axtell@c...>
Date: Wed Dec 10, 2003 1:05pm
Subject: RE: Bent Dana 30 Axle, need truss?
Have 4wheelers Supply custom build you a truss. They did mine for about
$200 I think it was.. They did an awesome job. Ask Rob for a quote in
the fab shop.
Tony Axtell 78CJ5
-----Original Message-----
From: clintltravis [mailto:clint_travis@m...]
Sent: Wednesday, December 10, 2003 12:50 PM
To: az_vjc@yahoogroups.com
Subject: [az_vjc] Bent Dana 30 Axle, need truss?
While having my fornt ARB seal replaced, Four Wheelers Supply
discovered that my front axle tube (Dana 30) on the drivers side is
bent. Four Wheelers Supply send it out and it is currently being
straitened.
From my research, this does not seem to be a real common problem. I
was wondering if anyone else has had this problem and if there is a
truss to keep it from happeing. Seems like there are plenty truss for
the rear axle (Dana 35) but nothing desent for a Dana 30. I am
thinking I may have to make a custom truss and weld it on.
Any comments welcome.
Clint
97 TJ Sahara
Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
95474 From: Chris Kilcullen <whoozey1953@y...>
Date: Wed Dec 10, 2003 11:59am
Subject: Re: Bent Dana 30 Axle, need truss?
Have you ever "jumped" your Jeep? The D30 is not prone to bending unless it has been subjected to this type of abuse. If you bought it used, no telling what the previous owner subjected it to.
clintltravis <clint_travis@m...> wrote:
While having my fornt ARB seal replaced, Four Wheelers Supply
discovered that my front axle tube (Dana 30) on the drivers side is
bent. Four Wheelers Supply send it out and it is currently being
straitened.
From my research, this does not seem to be a real common problem. I
was wondering if anyone else has had this problem and if there is a
truss to keep it from happeing. Seems like there are plenty truss for
the rear axle (Dana 35) but nothing desent for a Dana 30. I am
thinking I may have to make a custom truss and weld it on.
Any comments welcome.
Clint
97 TJ Sahara
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
---------------------------------
Do you Yahoo!?
New Yahoo! Photos - easier uploading and sharing
[Non-text portions of this message have been removed]
95475 From: brandonsxj <brandonhockey@c...>
Date: Wed Dec 10, 2003 1:08pm
Subject: Turn Signal Problem
This morning I went to turn left and realized that when I turn the
signal on it lights up but doesnt blink. It doesn't blink outside
either it just lights up and stays on until you cancel the signal.
Also it only occurs on the left side, the right is fine. Any ideas
on what this could be? Thank you for any suggestions. Brandon
95476 From: intertwingled <intertwingled@q...>
Date: Wed Dec 10, 2003 1:20pm
Subject: Re: Turn Signal Problem
Usually means that one of the turn signal bulbs is burned out. Have you
tried your emergency blinkers?
Tony
brandonsxj wrote:
>This morning I went to turn left and realized that when I turn the
>signal on it lights up but doesnt blink. It doesn't blink outside
>either it just lights up and stays on until you cancel the signal.
>Also it only occurs on the left side, the right is fine. Any ideas
>on what this could be? Thank you for any suggestions. Brandon
>
>
>
>
>Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
>
>
>
95477 From: airmenjames <airmenjames@y...>
Date: Wed Dec 10, 2003 0:15pm
Subject: TJ Light Bar
I've stripped out 3 of the 4 screws that are supposed to come out in
order to install my light bar. I tried to drill one out... somewhat
unsuccessfully. Does anyone have a tap and die set and maybe a
couple hours on saturday, willing to help a younger guy out with
something he's not done before. Ha!. I've only had my Jeep for 4
weeks and I'm loving it. Can't wait to get roading with more Jeepers.
95478 From: GP <grantepearson@c...>
Date: Wed Dec 10, 2003 0:35pm
Subject: [FS] Rancho 3" XJ coil springs
Went to a higher RE lift recently, would like to get these coils out of the
garage. They are still in good shape and ride great. $50
Grant
95479 From: jeepin_in_az <jeepin_in_az@y...>
Date: Wed Dec 10, 2003 2:04pm
Subject: [OT] - Programmer needed.
Sorry for OT, but jobs are hard to come by these days.
A company located in the Scotts Airpark is looking for a temp-to-hire
programmer. Needs Perl, PHP, MySQL, etc. Pay is not "great", but
not that low.
If you are interested, shoot me an e-mail and I will forward you the
name of the agency looking.
This is going through a temp agency, I work for them.
Mike Baney
95480 From: Jim <jishby@m...>
Date: Wed Dec 10, 2003 2:25pm
Subject: Crown King
Can anyone who has run the backway to Crown King lately, tell me if
you can get a full size longbed p/u thru. Thanks in advance,
Jim
95481 From: Frank BadAZXJ <BadAZXJ@h...>
Date: Wed Dec 10, 2003 3:04pm
Subject: Re: Bent Dana 30 Axle, need truss?
mine bent too...and I baby my jeep :P
Frank
groups.msn.com/badazxj
--- In az_vjc@yahoogroups.com, Chris Kilcullen <whoozey1953@y...>
wrote:
> Have you ever "jumped" your Jeep? The D30 is not prone to bending
unless it has been subjected to this type of abuse. If you bought it
used, no telling what the previous owner subjected it to.
>
>
> clintltravis <clint_travis@m...> wrote:
> While having my fornt ARB seal replaced, Four Wheelers Supply
> discovered that my front axle tube (Dana 30) on the drivers side is
> bent. Four Wheelers Supply send it out and it is currently being
> straitened.
>
> From my research, this does not seem to be a real common problem. I
> was wondering if anyone else has had this problem and if there is a
> truss to keep it from happeing. Seems like there are plenty truss
for
> the rear axle (Dana 35) but nothing desent for a Dana 30. I am
> thinking I may have to make a custom truss and weld it on.
>
> Any comments welcome.
>
> Clint
> 97 TJ Sahara
>
>
>
>
> Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
>
>
>
> ---------------------------------
> Do you Yahoo!?
> New Yahoo! Photos - easier uploading and sharing
>
> [Non-text portions of this message have been removed]
95482 From: Mike Baney <jeepin_in_az@y...>
Date: Wed Dec 10, 2003 3:21pm
Subject: Re: [OT] - Programmer needed.
Who mentioned $5.00 an hour??
If you are really interested in how much the pay is, e-mail me offline.
Mike
--- intertwingled <intertwingled@q...> wrote:
> No. On the other hand, I am not going to work for $5 per hour to
> program in Perl or PHP, either. =P
>
> Tony
>
> Mike Baney wrote:
>
> >Why outsource it to India? Do you want your job to be outsourced?
> >
> >Mike
> >
> >
> >--- intertwingled <intertwingled@q...> wrote:
> >
> >
> >>Well, you get what you pay for. Better outsource it to India. ;-)
> >>
> >>jeepin_in_az wrote:
> >>
> >>
> >>
> >>>Sorry for OT, but jobs are hard to come by these days.
> >>>
> >>>A company located in the Scotts Airpark is looking for a temp-to-hire
>
> >>>programmer. Needs Perl, PHP, MySQL, etc. Pay is not "great", but
> >>>not that low.
> >>>
> >>>If you are interested, shoot me an e-mail and I will forward you the
> >>>name of the agency looking.
> >>>
> >>>This is going through a temp agency, I work for them.
> >>>
> >>>Mike Baney
> >>>
> >>>
> >>>
> >>>
> >>>Your use of Yahoo! Groups is subject to
> >>>
> >>>
> >>http://docs.yahoo.com/info/terms/
> >>
> >>
> >>>
> >>>
> >>>
> >>>
> >>>
> >>>
> >>
> >>
> >
> >
> >__________________________________
> >Do you Yahoo!?
> >Protect your identity with Yahoo! Mail AddressGuard
> >http://antispam.yahoo.com/whatsnewfree
> >
> >
> >
> >
>
>
__________________________________
Do you Yahoo!?
New Yahoo! Photos - easier uploading and sharing.
http://photos.yahoo.com/
95483 From: AzVJC Website <azvjc@a...>
Date: Wed Dec 10, 2003 3:18pm
Subject: [TR] Land Use Meeting - Thursday, December 11, 2003 - Reminder
Hello All,Jim Florence is leading a Land Use Meeting trail run on Thursday, December 11, 2003.<br><br>When: 6:00 PM to 9:00 PM
Where: MGCP<br>
December 11, 2003<br>
6:00 p.m. to 9:00 p.m.<br>
National Guard Armory<br>
52nd Street and McDowell<br>
<br>
The National Guard Building is located at the NE corner of 52nd St. and<br>
McDowel Road, in Phoenix. The entrance is at the light signal, midway<br>
between 52nd St and 64th St/Galvin Parkway.<br>
<br>
Turn north at the light into the Guard Station. They will ask to see a<br>
photo ID. Lt. Col. Doug Larson will have notified them of the<br>
meeting...............<br>
<br>
Ask them for directions to BLDG. 101<br>
<br>
Enter the Rotunda.<br>
<br>
The Auditorium is on the south side.<br>
Rating: 2.0-
Length:
CB Channel:
MGCP Members,<br>
<br>
MARK YOUR CALENDARS!!!<br>
<br>
As announced several months ago the next few months of the MGCP meetings<br>
will rotate from north to south (Phoenix to Tucson) and will be evening<br>
meetings in the local areas. We hope this schedule will enable those that<br>
have been unable to make it to Florence during regular working hours to be<br>
involved in the happenings in the Florence Junction area land planning<br>
partnership.<br>
<br>
We've plowed through the Vision and Mission Statements, the objectives and<br>
goals and are now on a roll towards beginning implementation of the plans<br>
we've all worked towards for three years.<br>
<br>
BLM will have the inventory maps of the MGCP Pilot area available for<br>
verification of trails and areas of concern. Although the non-motorized<br>
trails are not indicated on this particular map we need to identify<br>
non-motorized trails along with motorized trails. Also the Great Western<br>
Trail and issues with it will be discussed. There will be discussions<br>
regarding a trails plan on the State Trust Lands on the west side of this<br>
area.<br>
This is used to add Land Use Meetings to the AzVJC Events List.
http://www.azvjc.org/default.asp?A=1&ID=1092
Click the link above To Add Your Name to the Sign Up List
Thank You,
- The AzVJC Website
95484 From: rolled1000 <rolled1@c...>
Date: Wed Dec 10, 2003 3:36pm
Subject: Roll Bar
I'm in need of a stock roll bar for a 99 TJ. Anyone know where I can
pick one up?
TIA
Terry
95485 From: GP <grantepearson@c...>
Date: Wed Dec 10, 2003 0:27pm
Subject: [FS] CJ Power Steering Box - Good for core
I have a Saginaw PS box from an 82 CJ8 taking up space on my workbench.
Would be good for a core for anyone doing a PS conversion. Get it out of my
garage! Email if interested. Thanks.
Grant
95486 From: Ruben Aviles <azjeeper@h...>
Date: Wed Dec 10, 2003 5:37pm
Subject: member sighting
A dark green TJ w/rock ready system (from what it looked like) getting on
the freeway from 32nd Street going west. Sweet rig man. I was in front of
you in the copper colored TJ. Wasn't sure if you saw me wave. Here you go.
>From: az_vjc@yahoogroups.com
>Reply-To: az_vjc@yahoogroups.com
>To: az_vjc@yahoogroups.com
>Subject: [az_vjc] Digest Number 4172
>Date: 10 Dec 2003 21:22:40 -0000
>
>There are 12 messages in this issue.
>
>Topics in this digest:
>
> 1. RE: Someting wrong with rear end/locker?
> From: "Kevin Gallagher" <GIThunder81@c...>
> 2. Re: CJ tranny
> From: "Linda" <minihummer@w...>
> 3. Re: Any unclaimed prizes from the BBQ-i.e. ME......LOL
> From: NVRSTUKXJ@a...
> 4. Looking for a DEAD Jeep Automatic Tranny either 999 or 727
> From: rokkcrawler@a...
> 5. Bent Dana 30 Axle, need truss?
> From: "clintltravis" <clint_travis@m...>
> 6. Reply to Jamie for a T18
> From: "Vernelle Massey" <vernellem@c...>
> 7. Fw: failure notice
> From: "Dan & Peggy Dennis" <dannpegg@c...>
> 8. RE: Bent Dana 30 Axle, need truss?
> From: "Tony" <axtell@c...>
> 9. Re: Bent Dana 30 Axle, need truss?
> From: Chris Kilcullen <whoozey1953@y...>
> 10. Turn Signal Problem
> From: "brandonsxj" <brandonhockey@c...>
> 11. Re: Turn Signal Problem
> From: "intertwingled" <intertwingled@q...>
> 12. TJ Light Bar
> From: "airmenjames" <airmenjames@y...>
>
>
>__________________________________________________ ______________________
>__________________________________________________ ______________________
>
>Message: 1
> Date: Wed, 10 Dec 2003 10:19:29 -0800
> From: "Kevin Gallagher" <GIThunder81@c...>
>Subject: RE: Someting wrong with rear end/locker?
>
>Marty,
>
> Welcome to the no slip locker club! LOL.... Don't worry I have
>the same problems I was once told its because the axle is twisting side
>to side under the jeep and that's why it does it. I was worried with
>mine at first but youll get used to it. If you have any more questions
>drop me a line.
>
>Kevin Gallagher
>"Make it Fit!"
>
>
>-----Original Message-----
>From: Marty [mailto:robatari@y...]
>Sent: Tuesday, December 09, 2003 1:14 PM
>To: azvjc
>Subject: [az_vjc] Someting wrong with rear end/locker?
>
> About 2 weeks ago I installed a no-slip in the rear
>of my 98 tj d35 every thing seemed to go well and it
>tested fine.I noticed a little bit of a lean to
>passenger when taking off,I think that might be
>normal.
>Today I made a sharp left from a stop and it felt like
>my left rear tire/rear end came off the ground and I
>had a enough lean to passenger to give me a bit of a
>scare. I tried it a few more times and it only happens
>on sharp left turns.I've got a 4" lift w/stock arms
>and rear track bar bracket.Any Ideas what would cause
>this.
> Thanks Marty
>
>
>__________________________________
>Do you Yahoo!?
>New Yahoo! Photos - easier uploading and sharing.
>http://photos.yahoo.com/
>
>
>
>Your use of Yahoo! Groups is subject to
>http://docs.yahoo.com/info/terms/
>
>
>
>
>
>
>__________________________________________________ ______________________
>__________________________________________________ ______________________
>
>Message: 2
> Date: Wed, 10 Dec 2003 19:03:36 -0000
> From: "Linda" <minihummer@w...>
>Subject: Re: CJ tranny
>
>I have a T18A sitting in the barn. It's a long shaft model from a
>1980 J20 truck. 93k miles on it. Converting it to a short shaft is
>essentially a rebuild. $200 takes it.
>
>Linda
>54 wagon
>
>--- In az_vjc@yahoogroups.com, "jquise2423" <jquise2423@a...> wrote:
> > Looking for a T18 transmission for my CJ. Does anyone know of a
>good
> > source for one.
> > Jamie
>
>
>
>__________________________________________________ ______________________
>__________________________________________________ ______________________
>
>Message: 3
> Date: Wed, 10 Dec 2003 13:23:42 -0500
> From: NVRSTUKXJ@a...
>Subject: Re: Any unclaimed prizes from the BBQ-i.e. ME......LOL
>
>your name got pulled a couple of times, but we kept putting it back and
>selecting someone else..... :-)
>
>
>__________________________________________________ ______________________
>__________________________________________________ ______________________
>
>Message: 4
> Date: Wed, 10 Dec 2003 12:40:18 EST
> From: rokkcrawler@a...
>Subject: Looking for a DEAD Jeep Automatic Tranny either 999 or 727
>
>Anyone have a "DEAD" TF999 or TF727 for a Jeep they want to get rid of
>?????
> If it has linkage that would even be better. Email me off post please.
>
>TIA
>
>
>[Non-text portions of this message have been removed]
>
>
>
>__________________________________________________ ______________________
>__________________________________________________ ______________________
>
>Message: 5
> Date: Wed, 10 Dec 2003 19:50:23 -0000
> From: "clintltravis" <clint_travis@m...>
>Subject: Bent Dana 30 Axle, need truss?
>
>While having my fornt ARB seal replaced, Four Wheelers Supply
>discovered that my front axle tube (Dana 30) on the drivers side is
>bent. Four Wheelers Supply send it out and it is currently being
>straitened.
>
>From my research, this does not seem to be a real common problem. I
>was wondering if anyone else has had this problem and if there is a
>truss to keep it from happeing. Seems like there are plenty truss for
>the rear axle (Dana 35) but nothing desent for a Dana 30. I am
>thinking I may have to make a custom truss and weld it on.
>
>Any comments welcome.
>
>Clint
>97 TJ Sahara
>
>
>
>__________________________________________________ ______________________
>__________________________________________________ ______________________
>
>Message: 6
> Date: Wed, 10 Dec 2003 19:25:11 -0000
> From: "Vernelle Massey" <vernellem@c...>
>Subject: Reply to Jamie for a T18
>
>Hi Jamie,
>Call my son Jon Massey. He has one that is worth $1150.00 and he will
>entertain a reasonable offer. It is complete, with bell housing to
>transfer case. He will be at 623-583-1787, for about 5 more minutes.
>After 1:00 he'll be at 623-931-7775. After 8:00 PM 623-815-1088.
>
>
>
>__________________________________________________ ______________________
>__________________________________________________ ______________________
>
>Message: 7
> Date: Wed, 10 Dec 2003 11:02:13 -0700
> From: "Dan & Peggy Dennis" <dannpegg@c...>
>Subject: Fw: failure notice
>
> In my opinion, you should upgrade to 5.25" speakers in the dash. The
>oblong
>4x6 stock speakers tend to distort due to the shape.
>
> Just my .02
>
> Dan
>
> > --- In az_vjc@yahoogroups.com, "ScottG" <98tjgreen@c...> wrote:
> > > Mike I still have original radio and speakers for 98 TJ should fit.
> > Yours
> > > for whatever you want to offer i.e... Beer Money, let me know if
> > you still
> > > want them.
> > >
> > > Scott G
> > > 98tjgreen@c...
> > > ----- Original Message -----
> > > From: "Mike" <msa12171@a...>
> > > To: <az_vjc@yahoogroups.com>
> > > Sent: Tuesday, December 09, 2003 9:17 AM
> > > Subject: [az_vjc] looking for stock TJ speakers
> > >
> > >
> > > > I need the stock dash and soundbar speakers for a 97 TJ. If
> > anyone
> > > > has done A/M speakers and still has their factory ones laying
> > around,
> > > > please let me know. Thanks!
> > > >
> > > > Mike Anderson
> > > > 602-321-7873
> > > >
> > > >
> > > >
> > > >
> > > > Your use of Yahoo! Groups is subject to
> > http://docs.yahoo.com/info/terms/
> > > >
> > > >
> >
> >
>
>
>
>__________________________________________________ ______________________
>__________________________________________________ ______________________
>
>Message: 8
> Date: Wed, 10 Dec 2003 14:05:34 -0700
> From: "Tony" <axtell@c...>
>Subject: RE: Bent Dana 30 Axle, need truss?
>
>Have 4wheelers Supply custom build you a truss. They did mine for about
>$200 I think it was.. They did an awesome job. Ask Rob for a quote in
>the fab shop.
>
>Tony Axtell 78CJ5
>
>-----Original Message-----
>From: clintltravis [mailto:clint_travis@m...]
>Sent: Wednesday, December 10, 2003 12:50 PM
>To: az_vjc@yahoogroups.com
>Subject: [az_vjc] Bent Dana 30 Axle, need truss?
>
>While having my fornt ARB seal replaced, Four Wheelers Supply
>discovered that my front axle tube (Dana 30) on the drivers side is
>bent. Four Wheelers Supply send it out and it is currently being
>straitened.
>
>From my research, this does not seem to be a real common problem. I
>was wondering if anyone else has had this problem and if there is a
>truss to keep it from happeing. Seems like there are plenty truss for
>the rear axle (Dana 35) but nothing desent for a Dana 30. I am
>thinking I may have to make a custom truss and weld it on.
>
>Any comments welcome.
>
>Clint
>97 TJ Sahara
>
>
>
>
>Your use of Yahoo! Groups is subject to
>http://docs.yahoo.com/info/terms/
>
>
>
>
>__________________________________________________ ______________________
>__________________________________________________ ______________________
>
>Message: 9
> Date: Wed, 10 Dec 2003 11:59:44 -0800 (PST)
> From: Chris Kilcullen <whoozey1953@y...>
>Subject: Re: Bent Dana 30 Axle, need truss?
>
>Have you ever "jumped" your Jeep? The D30 is not prone to bending unless it
>has been subjected to this type of abuse. If you bought it used, no telling
>what the previous owner subjected it to.
>
>
>clintltravis <clint_travis@m...> wrote:
>While having my fornt ARB seal replaced, Four Wheelers Supply
>discovered that my front axle tube (Dana 30) on the drivers side is
>bent. Four Wheelers Supply send it out and it is currently being
>straitened.
>
>From my research, this does not seem to be a real common problem. I
>was wondering if anyone else has had this problem and if there is a
>truss to keep it from happeing. Seems like there are plenty truss for
>the rear axle (Dana 35) but nothing desent for a Dana 30. I am
>thinking I may have to make a custom truss and weld it on.
>
>Any comments welcome.
>
>Clint
>97 TJ Sahara
>
>
>
>
>Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
>---------------------------------
>Do you Yahoo!?
>New Yahoo! Photos - easier uploading and sharing
>
>[Non-text portions of this message have been removed]
>
>
>
>__________________________________________________ ______________________
>__________________________________________________ ______________________
>
>Message: 10
> Date: Wed, 10 Dec 2003 21:08:17 -0000
> From: "brandonsxj" <brandonhockey@c...>
>Subject: Turn Signal Problem
>
>This morning I went to turn left and realized that when I turn the
>signal on it lights up but doesnt blink. It doesn't blink outside
>either it just lights up and stays on until you cancel the signal.
>Also it only occurs on the left side, the right is fine. Any ideas
>on what this could be? Thank you for any suggestions. Brandon
>
>
>
>__________________________________________________ ______________________
>__________________________________________________ ______________________
>
>Message: 11
> Date: Wed, 10 Dec 2003 14:20:23 -0700
> From: "intertwingled" <intertwingled@q...>
>Subject: Re: Turn Signal Problem
>
>Usually means that one of the turn signal bulbs is burned out. Have you
>tried your emergency blinkers?
>
>Tony
>
>brandonsxj wrote:
>
> >This morning I went to turn left and realized that when I turn the
> >signal on it lights up but doesnt blink. It doesn't blink outside
> >either it just lights up and stays on until you cancel the signal.
> >Also it only occurs on the left side, the right is fine. Any ideas
> >on what this could be? Thank you for any suggestions. Brandon
> >
> >
> >
> >
> >Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
> >
> >
> >
> >
> >
> >
>
>
>
>
>__________________________________________________ ______________________
>__________________________________________________ ______________________
>
>Message: 12
> Date: Wed, 10 Dec 2003 20:15:45 -0000
> From: "airmenjames" <airmenjames@y...>
>Subject: TJ Light Bar
>
>I've stripped out 3 of the 4 screws that are supposed to come out in
>order to install my light bar. I tried to drill one out... somewhat
>unsuccessfully. Does anyone have a tap and die set and maybe a
>couple hours on saturday, willing to help a younger guy out with
>something he's not done before. Ha!. I've only had my Jeep for 4
>weeks and I'm loving it. Can't wait to get roading with more Jeepers.
>
>
>
>__________________________________________________ ______________________
>__________________________________________________ ______________________
>
>
>
>Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
__________________________________________________ _______________
Winterize your home with tips from MSN House & Home.
http://special.msn.com/home/warmhome.armx
95487 From: Dan Dennis <dannpegg@c...>
Date: Wed Dec 10, 2003 1:32pm
Subject: Re: looking for stock TJ speakers (WAS: failure notice)
Oops...Forgot to change the subject...
Dan
--- In az_vjc@yahoogroups.com, "Dan & Peggy Dennis" <dannpegg@c...>
wrote:
> In my opinion, you should upgrade to 5.25" speakers in the dash.
The oblong
> 4x6 stock speakers tend to distort due to the shape.
>
> Just my .02
>
> Dan
>
> > --- In az_vjc@yahoogroups.com, "ScottG" <98tjgreen@c...> wrote:
> > > Mike I still have original radio and speakers for 98 TJ should
fit.
> > Yours
> > > for whatever you want to offer i.e... Beer Money, let me know if
> > you still
> > > want them.
> > >
> > > Scott G
> > > 98tjgreen@c...
> > > ----- Original Message -----
> > > From: "Mike" <msa12171@a...>
> > > To: <az_vjc@yahoogroups.com>
> > > Sent: Tuesday, December 09, 2003 9:17 AM
> > > Subject: [az_vjc] looking for stock TJ speakers
> > >
> > >
> > > > I need the stock dash and soundbar speakers for a 97 TJ. If
> > anyone
> > > > has done A/M speakers and still has their factory ones laying
> > around,
> > > > please let me know. Thanks!
> > > >
> > > > Mike Anderson
> > > > 602-321-7873
> > > >
> > > >
> > > >
> > > >
> > > > Your use of Yahoo! Groups is subject to
> > http://docs.yahoo.com/info/terms/
> > > >
> > > >
> >
> >
95488 From: Mike Baney <jeepin_in_az@y...>
Date: Wed Dec 10, 2003 2:58pm
Subject: Re: [OT] - Programmer needed.
Why outsource it to India? Do you want your job to be outsourced?
Mike
--- intertwingled <intertwingled@q...> wrote:
> Well, you get what you pay for. Better outsource it to India. ;-)
>
> jeepin_in_az wrote:
>
> >Sorry for OT, but jobs are hard to come by these days.
> >
> >A company located in the Scotts Airpark is looking for a temp-to-hire
> >programmer. Needs Perl, PHP, MySQL, etc. Pay is not "great", but
> >not that low.
> >
> >If you are interested, shoot me an e-mail and I will forward you the
> >name of the agency looking.
> >
> >This is going through a temp agency, I work for them.
> >
> >Mike Baney
> >
> >
> >
> >
> >Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
> >
> >
> >
> >
> >
> >
>
>
__________________________________
Do you Yahoo!?
Protect your identity with Yahoo! Mail AddressGuard
http://antispam.yahoo.com/whatsnewfree
95489 From: DesertJeep <joey@d...>
Date: Wed Dec 10, 2003 6:29pm
Subject: RE: Crown King
LOL you can get your moms Lincon Towncar up to CK with the right winch and
towstrap. :) Is it 4wd? High clearance? You will need some clearence to get
to CK at a minumum. The lower the vehicle the more problems and the longer
it will take.
Joey K
http://www.desertjeep.com
93YJ
-----Original Message-----
From: Jim [mailto:jishby@m...]
Sent: Wednesday, December 10, 2003 3:25 PM
To: az_vjc@yahoogroups.com
Subject: [az_vjc] Crown King
Can anyone who has run the backway to Crown King lately, tell me if you can
get a full size longbed p/u thru. Thanks in advance,
Jim
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
95490 From: DesertJeep <joey@d...>
Date: Wed Dec 10, 2003 6:25pm
Subject: RE: TJ Light Bar
What side of town are you on?
Joey K
http://www.desertjeep.com
93YJ
-----Original Message-----
From: airmenjames [mailto:airmenjames@y...]
Sent: Wednesday, December 10, 2003 1:16 PM
To: az_vjc@yahoogroups.com
Subject: [az_vjc] TJ Light Bar
I've stripped out 3 of the 4 screws that are supposed to come out in order
to install my light bar. I tried to drill one out... somewhat
unsuccessfully. Does anyone have a tap and die set and maybe a couple hours
on saturday, willing to help a younger guy out with something he's not done
before. Ha!. I've only had my Jeep for 4 weeks and I'm loving it. Can't
wait to get roading with more Jeepers.
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
95491 From: intertwingled <intertwingled@q...>
Date: Wed Dec 10, 2003 2:09pm
Subject: Re: [OT] - Programmer needed.
Well, you get what you pay for. Better outsource it to India. ;-)
jeepin_in_az wrote:
>Sorry for OT, but jobs are hard to come by these days.
>
>A company located in the Scotts Airpark is looking for a temp-to-hire
>programmer. Needs Perl, PHP, MySQL, etc. Pay is not "great", but
>not that low.
>
>If you are interested, shoot me an e-mail and I will forward you the
>name of the agency looking.
>
>This is going through a temp agency, I work for them.
>
>Mike Baney
>
>
>
>
>Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
>
>
>
95492 From: intertwingled <intertwingled@q...>
Date: Wed Dec 10, 2003 3:11pm
Subject: Re: [OT] - Programmer needed.
No. On the other hand, I am not going to work for $5 per hour to
program in Perl or PHP, either. =P
Tony
Mike Baney wrote:
>Why outsource it to India? Do you want your job to be outsourced?
>
>Mike
>
>
>--- intertwingled <intertwingled@q...> wrote:
>
>
>>Well, you get what you pay for. Better outsource it to India. ;-)
>>
>>jeepin_in_az wrote:
>>
>>
>>
>>>Sorry for OT, but jobs are hard to come by these days.
>>>
>>>A company located in the Scotts Airpark is looking for a temp-to-hire
>>>programmer. Needs Perl, PHP, MySQL, etc. Pay is not "great", but
>>>not that low.
>>>
>>>If you are interested, shoot me an e-mail and I will forward you the
>>>name of the agency looking.
>>>
>>>This is going through a temp agency, I work for them.
>>>
>>>Mike Baney
>>>
>>>
>>>
>>>
>>>Your use of Yahoo! Groups is subject to
>>>
>>>
>>http://docs.yahoo.com/info/terms/
>>
>>
>>>
>>>
>>>
>>>
>>>
>>>
>>
>>
>
>
>__________________________________
>Do you Yahoo!?
>Protect your identity with Yahoo! Mail AddressGuard
>http://antispam.yahoo.com/whatsnewfree
>
>
>
>
95493 From: Bill LaBrie <mrbuttz@h...>
Date: Wed Dec 10, 2003 6:48pm
Subject: RE: Crown King
During our October poker run, had a couple of Chevy long-beds (in addition
to a 4Runner, a YJ, a CJ, several TJ's, and my ZJ). No problems to speak of,
but they were running lifts. Kind of pointless for them to take any of the
more extreme sections--they only burn tread and break parts. The go-arounds
were no problem, however.
Jeeps just flat rule. :-) You heard it here.
>From: "DesertJeep" <joey@d...>
>Reply-To: <joey@d...>
>To: "'Jim'" <jishby@m...>,<az_vjc@yahoogroups.com>
>Subject: RE: [az_vjc] Crown King
>Date: Wed, 10 Dec 2003 19:29:20 -0700
>
>LOL you can get your moms Lincon Towncar up to CK with the right winch and
>towstrap. :) Is it 4wd? High clearance? You will need some clearence to get
>to CK at a minumum. The lower the vehicle the more problems and the longer
>it will take.
>
>
>Joey K
>http://www.desertjeep.com
>93YJ
>
>
>-----Original Message-----
>From: Jim [mailto:jishby@m...]
>Sent: Wednesday, December 10, 2003 3:25 PM
>To: az_vjc@yahoogroups.com
>Subject: [az_vjc] Crown King
>
>Can anyone who has run the backway to Crown King lately, tell me if you can
>get a full size longbed p/u thru. Thanks in advance,
>
>Jim
>
>
>
>
>Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
>
>
>Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
__________________________________________________ _______________
Don’t worry if your Inbox will max out while you are enjoying the holidays.
Get MSN Extra Storage! http://join.msn.com/?PAGE=features/es
95494 From: jaylalib <jaylalib1@c...>
Date: Wed Dec 10, 2003 8:31pm
Subject: Re: I'm a dad!!!
CONGRATS!!!!
Hope you guys are doing well. It is an amazing experience!
Jason
--- In az_vjc@yahoogroups.com, Wade Ungaro <swaders7@y...> wrote:
> Hey everyone,
>
> I just wanted to let you know that I've been in the hospital since
Saturday with my wife, Sarah. We came home yesterday with our new
baby girl, Sedona Joy Ungaro. She was 6 lbs 15 oz and 20 in long.
Everything went smooth on 12-6-3 and everyone is completely healthy.
Here's a few links to pictures so everyone can see our beautiful
little girl.
>
>
http://img4.photobucket.com/albums/0803/swaders7/Sedona/Image062.jpg
>
http://img4.photobucket.com/albums/0803/swaders7/Sedona/Image063.jpg
>
http://img4.photobucket.com/albums/0803/swaders7/Sedona/Image064.jpg
>
>
> ~Wade
>
>
>
>
> ~Wade
> '97 "Blue Cactus" TJ
> http://members.ebay.com/aboutme/swaders7/
> http://www.theungaros.com
> http://www.azvjc.org
>
>
> ---------------------------------
> Do you Yahoo!?
> New Yahoo! Photos - easier uploading and sharing
>
> [Non-text portions of this message have been removed]
95495 From: jeff misischia <g4mannn@y...>
Date: Wed Dec 10, 2003 6:33pm
Subject: Re: Crown King
i wouldnt try...........
--- Jim <jishby@m...> wrote:
> Can anyone who has run the backway to Crown King
> lately, tell me if
> you can get a full size longbed p/u thru. Thanks in
> advance,
>
> Jim
>
>
>
>
> Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
>
>
__________________________________
Do you Yahoo!?
Protect your identity with Yahoo! Mail AddressGuard
http://antispam.yahoo.com/whatsnewfree
95496 From: David Cole <lists@o...>
Date: Wed Dec 10, 2003 9:36pm
Subject: table mesa maps
Is there a state or BLM office in the East Valley that contains maps of the
Table Mesa area?
David