blooddrive
01-09-2004, 05:22 AM
94845-94869
94845 From: Fred Wilson <fredtj@c...>
Date: Mon Nov 24, 2003 9:33am
Subject: Re: Re: Ahhh, what happened to my Jeep !!! ;)
Yup, I had seen that also.
For about the same amount of money, I like the PSC ones better. They
don't use nuts and bolts around the outside of the fender, but weld it
instead. I think that looks nicer. You don't have the little gap on the
PSC ones that the MetalFusion ones have.
Also the PSC ones use a solid piece of metal that bolts to all four of
the inner fender well bolts (that's really a big support area).. The MF
ones use two tabs and just two of those inner fender bolts.
Best,
Fred
Dan Dennis wrote:
>Here's a company that makes the same kind of kit...
>
>http://www.metalfusionfab.com/tj_tube_fenders.htm
>
>
>
>--- In az_vjc@yahoogroups.com, Fred Wilson <fredtj@c...> wrote:
>
>
>>Joe, as much as I would like to take credit for "fabbing 'em", I
>>
>>
>can't ;)
>
>
>>Those are the PSC fenders.
>>
>>
>> :)
>> Fred
>>
>>
>>
>>Joe West wrote:
>>
>>
>>
>>>Fred,
>>>
>>>That is one of the nicest jobs I have ever seen for a flat fender
>>>
>>>
>conversion. Good work!
>
>
>>>Kind Regards,
>>>
>>>Joe
>>>
>>>Joe F. West
>>>Applications Consultant Synopsys Corporation
>>>Cell (650)861-1359 Office (480) 733-2147
>>>Blackberry PIN 2005DD8F
>>>
>>>
>>>-----Original Message-----
>>>From: Fred Wilson [mailto:fredtj@c...]
>>>Sent: Sunday, November 23, 2003 1:14 PM
>>>To: az_vjc@yahoogroups.com
>>>Subject: Re: [az_vjc] Ahhh, what happened to my Jeep !!! ;)
>>>
>>>
>>>Ok, here's the rest of it ;)
>>>------------------------------------------------------------------
>>>Took the flare off:
>>>
>>> http://fredtj.com/images/photos/pcsfenders/FlareOff.JPG
>>>
>>>
>>>Let's see, I'm cutting off stuff with the plasma cutter:
>>>
>>>http://fredtj.com/images/photos/pcsfenders/Cutting.JPG
>>>
>>>
>>>Mmmm, it's pretty much all off now:
>>>
>>>http://fredtj.com/images/photos/pcsfenders/Exposed1.JPG
>>>
>>>
>>>Ok, Dan's grinding some of the rough edges off:
>>>
>>>http://fredtj.com/images/photos/pcsfenders/Grind.JPG
>>>
>>>
>>>Dan's trimming some of the other side:
>>>
>>>http://fredtj.com/images/photos/pcsfenders/DanCut.JPG
>>>
>>>
>>>Passenger side:
>>>
>>>http://fredtj.com/images/photos/pcsfenders/Exposed2.JPG
>>>
>>>
>>>Underside shot of the new fender:
>>>
>>> http://fredtj.com/images/photos/pcsfenders/Underside.JPG
>>>
>>>
>>>I'm putting the light trim back on:
>>>
>>>http://fredtj.com/images/photos/pcsfenders/FredLight.JPG
>>>
>>>
>>>Finished ! (Thanks for the help Dan !! )
>>>
>>>Well, almost. I sill have to drill and bolt the top of the fenders.
>>>I also have to drill and bolt that front hole in the rocker guards
>>>
>>>
>to
>
>
>>>the new body panel.
>>>Lastly, I'm looking (in some of the hot rod shops)for some really
>>>
>>>
>small
>
>
>>>bulbs for the front turn signal/parking light, to fit right in the
>>>front, tucked up by the brace. If I can't find anything that'll
>>>
>>>
>fit,
>
>
>>>I'll use some CJ turn signals/parking light (round) and mount the
>>>
>>>
>in the
>
>
>>>front grill, below the headlights:
>>>
>>>http://fredtj.com/images/photos/pcsfenders/Done1.JPG
>>>
>>>http://fredtj.com/images/photos/pcsfenders/Done2.JPG
>>>
>>>http://fredtj.com/images/photos/pcsfenders/Done3.JPG
>>>
>>>http://fredtj.com/images/photos/pcsfenders/Done4.JPG
>>>
>>>
>>>:)
>>>Fred
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>Joe West wrote:
>>>
>>>
>>>
>>>
>>>
>>>>Now... how about some pictures of what remains on the Jeep :)
>>>>
>>>>Joe F. West
>>>>Applications Consultant Synopsys Corporation
>>>>Cell (650)861-1359 Office (480) 733-2147
>>>>Blackberry PIN 2005DD8F
>>>>
>>>>
>>>>-----Original Message-----
>>>>From: Fred Wilson [mailto:fredtj@c...]
>>>>Sent: Sunday, November 23, 2003 10:41 AM
>>>>To: az_vjc@yahoogroups.com
>>>>Subject: [az_vjc] Ahhh, what happened to my Jeep !!! ;)
>>>>
>>>>
>>>>Dan and I crawled all of the front of the Jeep yesterday, with
>>>>instruments of desctuction (sawsall, plasma cutter, cutoff wheel,
>>>>grinder, hammers, etc. ;) ) in hand ;)
>>>>
>>>>http://fredtj.com/images/photos/pcsfenders/Junk1.JPG
>>>>
>>>>http://fredtj.com/images/photos/pcsfenders/Junk2.JPG
>>>>
>>>>
>>>>
>>>>:)
>>>>Fred
>>>>
>>>>
>>>>
>>>>
>>>>Your use of Yahoo! Groups is subject to
>>>>
>>>>
>http://docs.yahoo.com/info/terms/
>
>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>
>>>
>>>Your use of Yahoo! Groups is subject to
>>>
>>>
>http://docs.yahoo.com/info/terms/
>
>
>>>
>>>
>>>
>>>
>>>
>>[Non-text portions of this message have been removed]
>>
>>
>
>
>
>
>Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
>
>
[Non-text portions of this message have been removed]
--------------------------------------------------------------------------------
ADVERTISEMENT
94846 From: AzVJC Website <azvjc@a...>
Date: Mon Nov 24, 2003 9:31am
Subject: [TR] Club BBQ - Sunday, December 7, 2003 - Reminder
Hello All,John Hunter Kanicsar is leading a Club BBQ trail run on Sunday, December 7, 2003.<br><br>When: 3 pm
Where: Hunter Offroad Parking lot
Rating: 2.0-
Length: how ever long
CB Channel: 4
Hunter's 4th Semi-annual AZVJC BBQ!!!<br>
<br>
Since this is so close to Christmas, I figured I would turn this into a AZVJC Christams Party!! I will have tre up and the whole nine.. Be really nice if maybe someone would like to volunteer to be Santa Claus for the kids??<br>
Do the standard routine, bring lots of food. Bring the BBQ's, have a raffle. (PLan on putting together a big one if I can get a good turn out)Also, the New Ramp will be there, so the Ramp Contest can start all overagain. Was also thinking of a contest for the Best Christmas decoreated Jeep..<br>
<br>
<br>
I will have more info avaible soon. I will also keep things going with updates. Just wanted to get this out <br>
so folks could start planning.<br>
<br>
<br>
Talk to everybody soon.<br>
<br>
John k<br>
<br>
<br>
<br>
<br>
<br>
Well, OK, sorry it has taken so long to get this going, (between work and personal things, life has been a bit hectic)
Club BBQ.
http://www.azvjc.org/default.asp?A=1&ID=1056
Click the link above To Add Your Name to the Sign Up List
Thank You,
- The AzVJC Website
94847 From: frank badazxj <BadAZXJ@h...>
Date: Mon Nov 24, 2003 0:12pm
Subject: Sharkys back! :P
He's still got his skillz! Glad to see ya back Sharky!
http://groups.msn.com/badazxj/sharkys1strun.msnw
Frank
http://groups.msn.com/badazxj/badazxj.msnw
__________________________________________________ _______________
Say “goodbye” to busy signals and slow downloads with a high-speed Internet
connection! Prices start at less than $1 a day average.
https://broadband.msn.com (Prices may vary by service area.)
94848 From: azjeeptj <azjeeptj@c...>
Date: Mon Nov 24, 2003 0:26pm
Subject: RE: Re: Jeep vids
I think you might have to look at this route as well!
Mark
-----Original Message-----
From: Lester P. [mailto:AZJeep1@c...]
Sent: Monday, November 24, 2003 6:48 AM
To: az_vjc@yahoogroups.com
Subject: [az_vjc] Re: Jeep vids
Those links worked. Looks like great fun and a well done video to
boot! Maybe I should go that route and save some money with the
mods.
Lester
--- In az_vjc@yahoogroups.com, "Matt OBrien" <makaioo@y...> wrote:
> Try these...
>
> http://www.orp.com.au/RC%20Madness/RC%20MonsterTruck%
20Madness_01.wmv
> http://www.orp.com.au/RC%20Madness/RC%20MonsterTruck%
20Madness_02.wmv
> http://www.orp.com.au/RC%20Madness/RC%20MonsterTruck%
20Madness_02.wmv
>
> --- In az_vjc@yahoogroups.com, "k7ant" <k7ant@f...> wrote:
> > --- In az_vjc@yahoogroups.com, "k7ant" <k7ant@f...> wrote:
> > > For those with high speed connections.....
> > >
> > > from Jeeps unlimited website......
Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
94849 From: Dan Dennis <dannpegg@c...>
Date: Mon Nov 24, 2003 0:53pm
Subject: Re: Ahhh, what happened to my Jeep !!! ;)
Is there a webpage for this company?
--- In az_vjc@yahoogroups.com, Fred Wilson <fredtj@c...> wrote:
> I got the PSC fenders when they were on a special, pre-release
sale, so
> it wouldn't apply now.
>
> The install itself took, mmmm, probably 5 hours or so +-
>
>
> Best,
> Fred
>
>
> Dan Dennis wrote:
>
> >So, Fred...What was the total cost on them? And, how long did the
> >bulk of the job take?
> >
> >I've been thinking about doing the same type of flat fender job on
> >BRUZR...I was thinking of some kind of low profile lights for turn
> >signal/markers and wlding up some type of really small cage to
hold
> >them...Don't know what's out there, though. The side markers on a
YJ
> >is about the size I was thinking...
> >
> >Dan (BRUZR's Daddy)
> >
> >
> >--- In az_vjc@yahoogroups.com, Fred Wilson <fredtj@c...> wrote:
> >
> >
> >>Joe, as much as I would like to take credit for "fabbing 'em", I
> >>
> >>
> >can't ;)
> >
> >
> >>Those are the PSC fenders.
> >>
> >>
> >> :)
> >> Fred
> >>
> >>
> >>
> >>Joe West wrote:
> >>
> >>
> >>
> >>>Fred,
> >>>
> >>>That is one of the nicest jobs I have ever seen for a flat
fender
> >>>
> >>>
> >conversion. Good work!
> >
> >
> >>>Kind Regards,
> >>>
> >>>Joe
> >>>
> >>>Joe F. West
> >>>Applications Consultant Synopsys Corporation
> >>>Cell (650)861-1359 Office (480) 733-2147
> >>>Blackberry PIN 2005DD8F
> >>>
> >>>
> >>>-----Original Message-----
> >>>From: Fred Wilson [mailto:fredtj@c...]
> >>>Sent: Sunday, November 23, 2003 1:14 PM
> >>>To: az_vjc@yahoogroups.com
> >>>Subject: Re: [az_vjc] Ahhh, what happened to my Jeep !!! ;)
> >>>
> >>>
> >>>Ok, here's the rest of it ;)
> >>>-----------------------------------------------------------------
-
> >>>Took the flare off:
> >>>
> >>> http://fredtj.com/images/photos/pcsfenders/FlareOff.JPG
> >>>
> >>>
> >>>Let's see, I'm cutting off stuff with the plasma cutter:
> >>>
> >>>http://fredtj.com/images/photos/pcsfenders/Cutting.JPG
> >>>
> >>>
> >>>Mmmm, it's pretty much all off now:
> >>>
> >>>http://fredtj.com/images/photos/pcsfenders/Exposed1.JPG
> >>>
> >>>
> >>>Ok, Dan's grinding some of the rough edges off:
> >>>
> >>>http://fredtj.com/images/photos/pcsfenders/Grind.JPG
> >>>
> >>>
> >>>Dan's trimming some of the other side:
> >>>
> >>>http://fredtj.com/images/photos/pcsfenders/DanCut.JPG
> >>>
> >>>
> >>>Passenger side:
> >>>
> >>>http://fredtj.com/images/photos/pcsfenders/Exposed2.JPG
> >>>
> >>>
> >>>Underside shot of the new fender:
> >>>
> >>> http://fredtj.com/images/photos/pcsfenders/Underside.JPG
> >>>
> >>>
> >>>I'm putting the light trim back on:
> >>>
> >>>http://fredtj.com/images/photos/pcsfenders/FredLight.JPG
> >>>
> >>>
> >>>Finished ! (Thanks for the help Dan !! )
> >>>
> >>>Well, almost. I sill have to drill and bolt the top of the
fenders.
> >>>I also have to drill and bolt that front hole in the rocker
guards
> >>>
> >>>
> >to
> >
> >
> >>>the new body panel.
> >>>Lastly, I'm looking (in some of the hot rod shops)for some
really
> >>>
> >>>
> >small
> >
> >
> >>>bulbs for the front turn signal/parking light, to fit right in
the
> >>>front, tucked up by the brace. If I can't find anything that'll
> >>>
> >>>
> >fit,
> >
> >
> >>>I'll use some CJ turn signals/parking light (round) and mount
the
> >>>
> >>>
> >in the
> >
> >
> >>>front grill, below the headlights:
> >>>
> >>>http://fredtj.com/images/photos/pcsfenders/Done1.JPG
> >>>
> >>>http://fredtj.com/images/photos/pcsfenders/Done2.JPG
> >>>
> >>>http://fredtj.com/images/photos/pcsfenders/Done3.JPG
> >>>
> >>>http://fredtj.com/images/photos/pcsfenders/Done4.JPG
> >>>
> >>>
> >>>:)
> >>>Fred
> >>>
> >>>
> >>>
> >>>
> >>>
> >>>
> >>>
> >>>
> >>>Joe West wrote:
> >>>
> >>>
> >>>
> >>>
> >>>
> >>>>Now... how about some pictures of what remains on the Jeep :)
> >>>>
> >>>>Joe F. West
> >>>>Applications Consultant Synopsys Corporation
> >>>>Cell (650)861-1359 Office (480) 733-2147
> >>>>Blackberry PIN 2005DD8F
> >>>>
> >>>>
> >>>>-----Original Message-----
> >>>>From: Fred Wilson [mailto:fredtj@c...]
> >>>>Sent: Sunday, November 23, 2003 10:41 AM
> >>>>To: az_vjc@yahoogroups.com
> >>>>Subject: [az_vjc] Ahhh, what happened to my Jeep !!! ;)
> >>>>
> >>>>
> >>>>Dan and I crawled all of the front of the Jeep yesterday, with
> >>>>instruments of desctuction (sawsall, plasma cutter, cutoff
wheel,
> >>>>grinder, hammers, etc. ;) ) in hand ;)
> >>>>
> >>>>http://fredtj.com/images/photos/pcsfenders/Junk1.JPG
> >>>>
> >>>>http://fredtj.com/images/photos/pcsfenders/Junk2.JPG
> >>>>
> >>>>
> >>>>
> >>>>:)
> >>>>Fred
> >>>>
> >>>>
> >>>>
> >>>>
> >>>>Your use of Yahoo! Groups is subject to
> >>>>
> >>>>
> >http://docs.yahoo.com/info/terms/
> >
> >
> >>>>
> >>>>
> >>>>
> >>>>
> >>>>
> >>>>
> >>>>
> >>>
> >>>
> >>>Your use of Yahoo! Groups is subject to
> >>>
> >>>
> >http://docs.yahoo.com/info/terms/
> >
> >
> >>>
> >>>
> >>>
> >>>
> >>>
> >>[Non-text portions of this message have been removed]
> >>
> >>
> >
> >
> >
> >
> >Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
> >
> >
> >
> >
> >
>
>
> [Non-text portions of this message have been removed]
94850 From: intertwingled <intertwingled@q...>
Date: Mon Nov 24, 2003 1:06pm
Subject: *wave* to Steve Campbell ??
Yellow jeep pulled into Home Depot on Country Club right next to my apt
manager's car, where I was helping him tie a door onto the roof. You
have a nice jeep. Here is your
*wave*
Tony
94851 From: Brandon Sudeith <jeepinaz@c...>
Date: Mon Nov 24, 2003 1:36pm
Subject: Re: Ahhh, what happened to my Jeep !!! ;)
http://www.poisonspydercustoms.com/index2.html
Brandon
94852 From: Randy Richards <rrichards13@m...>
Date: Mon Nov 24, 2003 1:53pm
Subject: Re: Wanted: rear bumper to fit 1995 cherokee
--- In az_vjc@yahoogroups.com, "Randy Richards" <rrichards13@m...>
wrote:
> Just bought a 95 cherokee sport. Rear bumper has a poll
> dent......anyone replaced thiers w/ a custom bumper and still has
it
> laying around. I am sure that there is numerous years that will fit.
>
> Call if you want to get rid of it
>
> Randy
> 480-986-9420
94853 From: frank badazxj <BadAZXJ@h...>
Date: Mon Nov 24, 2003 2:02pm
Subject: turkey on the rocks....
so who's all goin? campin? What are you planning to run?
http://www.azrockcrawler.com/_IMAGES/2003/11-03AZONTHEROCKS/11-03AZONTHEROCKS.HTML
Frank
http://groups.msn.com/badazxj/badazxj.msnw
__________________________________________________ _______________
Say “goodbye” to busy signals and slow downloads with a high-speed Internet
connection! Prices start at less than $1 a day average.
https://broadband.msn.com (Prices may vary by service area.)
94854 From: Fred Wilson <fredtj@c...>
Date: Mon Nov 24, 2003 1:23pm
Subject: Re: Re: Ahhh, what happened to my Jeep !!! ;)
http://www.poisonspyder.com/index2.html
:)
Fred
Dan Dennis wrote:
>Is there a webpage for this company?
>
>--- In az_vjc@yahoogroups.com, Fred Wilson <fredtj@c...> wrote:
>
>
>>I got the PSC fenders when they were on a special, pre-release
>>
>>
>sale, so
>
>
>>it wouldn't apply now.
>>
>>The install itself took, mmmm, probably 5 hours or so +-
>>
>>
>>Best,
>>Fred
>>
>>
>>Dan Dennis wrote:
>>
>>
>>
>>>So, Fred...What was the total cost on them? And, how long did the
>>>bulk of the job take?
>>>
>>>I've been thinking about doing the same type of flat fender job on
>>>BRUZR...I was thinking of some kind of low profile lights for turn
>>>signal/markers and wlding up some type of really small cage to
>>>
>>>
>hold
>
>
>>>them...Don't know what's out there, though. The side markers on a
>>>
>>>
>YJ
>
>
>>>is about the size I was thinking...
>>>
>>>Dan (BRUZR's Daddy)
>>>
>>>
>>>--- In az_vjc@yahoogroups.com, Fred Wilson <fredtj@c...> wrote:
>>>
>>>
>>>
>>>
>>>>Joe, as much as I would like to take credit for "fabbing 'em", I
>>>>
>>>>
>>>>
>>>>
>>>can't ;)
>>>
>>>
>>>
>>>
>>>>Those are the PSC fenders.
>>>>
>>>>
>>>> :)
>>>> Fred
>>>>
>>>>
>>>>
>>>>Joe West wrote:
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>>Fred,
>>>>>
>>>>>That is one of the nicest jobs I have ever seen for a flat
>>>>>
>>>>>
>fender
>
>
>>>>>
>>>>>
>>>>>
>>>>>
>>>conversion. Good work!
>>>
>>>
>>>
>>>
>>>>>Kind Regards,
>>>>>
>>>>>Joe
>>>>>
>>>>>Joe F. West
>>>>>Applications Consultant Synopsys Corporation
>>>>>Cell (650)861-1359 Office (480) 733-2147
>>>>>Blackberry PIN 2005DD8F
>>>>>
>>>>>
>>>>>-----Original Message-----
>>>>>From: Fred Wilson [mailto:fredtj@c...]
>>>>>Sent: Sunday, November 23, 2003 1:14 PM
>>>>>To: az_vjc@yahoogroups.com
>>>>>Subject: Re: [az_vjc] Ahhh, what happened to my Jeep !!! ;)
>>>>>
>>>>>
>>>>>Ok, here's the rest of it ;)
>>>>>-----------------------------------------------------------------
>>>>>
>>>>>
>-
>
>
>>>>>Took the flare off:
>>>>>
>>>>>http://fredtj.com/images/photos/pcsfenders/FlareOff.JPG
>>>>>
>>>>>
>>>>>Let's see, I'm cutting off stuff with the plasma cutter:
>>>>>
>>>>>http://fredtj.com/images/photos/pcsfenders/Cutting.JPG
>>>>>
>>>>>
>>>>>Mmmm, it's pretty much all off now:
>>>>>
>>>>>http://fredtj.com/images/photos/pcsfenders/Exposed1.JPG
>>>>>
>>>>>
>>>>>Ok, Dan's grinding some of the rough edges off:
>>>>>
>>>>>http://fredtj.com/images/photos/pcsfenders/Grind.JPG
>>>>>
>>>>>
>>>>>Dan's trimming some of the other side:
>>>>>
>>>>>http://fredtj.com/images/photos/pcsfenders/DanCut.JPG
>>>>>
>>>>>
>>>>>Passenger side:
>>>>>
>>>>>http://fredtj.com/images/photos/pcsfenders/Exposed2.JPG
>>>>>
>>>>>
>>>>>Underside shot of the new fender:
>>>>>
>>>>>http://fredtj.com/images/photos/pcsfenders/Underside.JPG
>>>>>
>>>>>
>>>>>I'm putting the light trim back on:
>>>>>
>>>>>http://fredtj.com/images/photos/pcsfenders/FredLight.JPG
>>>>>
>>>>>
>>>>>Finished ! (Thanks for the help Dan !! )
>>>>>
>>>>>Well, almost. I sill have to drill and bolt the top of the
>>>>>
>>>>>
>fenders.
>
>
>>>>>I also have to drill and bolt that front hole in the rocker
>>>>>
>>>>>
>guards
>
>
>>>>>
>>>>>
>>>>>
>>>>>
>>>to
>>>
>>>
>>>
>>>
>>>>>the new body panel.
>>>>>Lastly, I'm looking (in some of the hot rod shops)for some
>>>>>
>>>>>
>really
>
>
>>>>>
>>>>>
>>>>>
>>>>>
>>>small
>>>
>>>
>>>
>>>
>>>>>bulbs for the front turn signal/parking light, to fit right in
>>>>>
>>>>>
>the
>
>
>>>>>front, tucked up by the brace. If I can't find anything that'll
>>>>>
>>>>>
>>>>>
>>>>>
>>>fit,
>>>
>>>
>>>
>>>
>>>>>I'll use some CJ turn signals/parking light (round) and mount
>>>>>
>>>>>
>the
>
>
>>>>>
>>>>>
>>>>>
>>>>>
>>>in the
>>>
>>>
>>>
>>>
>>>>>front grill, below the headlights:
>>>>>
>>>>>http://fredtj.com/images/photos/pcsfenders/Done1.JPG
>>>>>
>>>>>http://fredtj.com/images/photos/pcsfenders/Done2.JPG
>>>>>
>>>>>http://fredtj.com/images/photos/pcsfenders/Done3.JPG
>>>>>
>>>>>http://fredtj.com/images/photos/pcsfenders/Done4.JPG
>>>>>
>>>>>
>>>>>:)
>>>>>Fred
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>Joe West wrote:
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>>Now... how about some pictures of what remains on the Jeep :)
>>>>>>
>>>>>>Joe F. West
>>>>>>Applications Consultant Synopsys Corporation
>>>>>>Cell (650)861-1359 Office (480) 733-2147
>>>>>>Blackberry PIN 2005DD8F
>>>>>>
>>>>>>
>>>>>>-----Original Message-----
>>>>>>From: Fred Wilson [mailto:fredtj@c...]
>>>>>>Sent: Sunday, November 23, 2003 10:41 AM
>>>>>>To: az_vjc@yahoogroups.com
>>>>>>Subject: [az_vjc] Ahhh, what happened to my Jeep !!! ;)
>>>>>>
>>>>>>
>>>>>>Dan and I crawled all of the front of the Jeep yesterday, with
>>>>>>instruments of desctuction (sawsall, plasma cutter, cutoff
>>>>>>
>>>>>>
>wheel,
>
>
>>>>>>grinder, hammers, etc. ;) ) in hand ;)
>>>>>>
>>>>>>http://fredtj.com/images/photos/pcsfenders/Junk1.JPG
>>>>>>
>>>>>>http://fredtj.com/images/photos/pcsfenders/Junk2.JPG
>>>>>>
>>>>>>
>>>>>>
>>>>>>:)
>>>>>>Fred
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>Your use of Yahoo! Groups is subject to
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>http://docs.yahoo.com/info/terms/
>>>
>>>
>>>
>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>Your use of Yahoo! Groups is subject to
>>>>>
>>>>>
>>>>>
>>>>>
>>>http://docs.yahoo.com/info/terms/
>>>
>>>
>>>
>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>[Non-text portions of this message have been removed]
>>>>
>>>>
>>>>
>>>>
>>>
>>>
>>>Your use of Yahoo! Groups is subject to
>>>
>>>
>http://docs.yahoo.com/info/terms/
>
>
>>>
>>>
>>>
>>>
>>>
>>[Non-text portions of this message have been removed]
>>
>>
>
>
>
>
>Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
>
>
[Non-text portions of this message have been removed]
94855 From: <tandljacobson@a...>
Date: Mon Nov 24, 2003 9:53am
Subject: RE: Land Use Permit - Martinez Cabin
Thanks for putting up with us, Sandee. I was at the freeway opening and had
told Bill that they we applications and if he could find who took them home,
he could get one from them. While we're complaining about the permit process,
we should gripe about the fact that the info is in a tri-fold pamphlet. I
mean, that takes a lot of effort to open up and see what's actaully in there
right? ;-)
Tom
Message: 16
Date: Mon, 24 Nov 2003 07:35:20 -0700
From: "Sandee McCullen" <mccullen@c...>
Subject: RE: Land Use Permit - Martinez Cabin
I think I've already answered this but here's info for files again.........
and yes Bob, there were only information brochures available at the highway
opening. Not even applications. Hopefully I can convince them to allow the
shops and myself to sell them again................. This whole thing is
beyond stupid but until we can get this procedure changed I guess we have to
play the game. Sandee
[Non-text portions of this message have been removed]
94856 From: Randy Richards <rrichards13@m...>
Date: Mon Nov 24, 2003 3:06pm
Subject: Fwd: FW: Michael Jackson On The Run
>
__________________________________________________ _______________
Set yourself up for fun at home! Get tips on home entertainment equipment,
video game reviews, and more here.
http://special.msn.com/home/homeent.armx
[Non-text portions of this message have been removed]
94857 From: steven.campbell <steven.campbell@c...>
Date: Mon Nov 24, 2003 3:20pm
Subject: Re: *wave* to Steve Campbell ??
Thanks much. Here is a wave back at you!
Steve
----- Original Message -----
From: "intertwingled" <intertwingled@q...>
To: <az_vjc@yahoogroups.com>
Sent: Monday, November 24, 2003 2:06 PM
Subject: [az_vjc] *wave* to Steve Campbell ??
> Yellow jeep pulled into Home Depot on Country Club right next to my apt
> manager's car, where I was helping him tie a door onto the roof. You
> have a nice jeep. Here is your
>
> *wave*
>
> Tony
>
>
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
94858 From: Hackle <hackle@q...>
Date: Mon Nov 24, 2003 5:09pm
Subject: Promoting Table Mesa Clean-up
I went to a Popular Outdoor store on Bell and 27th Ave to ask them to post
up a flyer. They told me to stick a few on a rack.
I went to The new Outdoor Warehouse at I-17 and Yorkshire and they posted
two on the main entry board and even asked who to contact to get more.
They will get my outdoor money from now on!
The Outdoor Warehouse also had a live broadcast from KNIX at the time. I
gave them a flier and they will work on PSA's for the event near the end of
Jan.
This year the AZVJC is sponsoring this event if we get half the input we
usually do for events I am sure we can make it even bigger then last year,
(about 350 showed up).
I will hit Game and Fish and some OHV stores in the area this week also.
Get the fliers out early and often.
Jim F.
Arizona RockRats President
http://www.rockrats.org/
"I refuse to belong to any group that would have me as a member" Groucho
Marx
Member of the original dirty half dozen.
http://www.users.qwest.net/~jkflorence/
94859 From: blueazjeep <blueazjeep@y...>
Date: Mon Nov 24, 2003 5:22pm
Subject: HELP with steering stabilizer
I just bought an ES2000 steering stabilizer, the problem is, that the
kit comes with a bolt that fits snug inside the bushing...but it will
not work on my YJ, I have to use the stock bolt and it is too small
and the bolt will wobble around inside the bushing. The kit also
comes with a sleeve but it is the same size as my bolt, so that will
not work either! Any suggestions are greatly appreciated!
TIA, Greg
94860 From: Jim Russell <desertjeep@c...>
Date: Mon Nov 24, 2003 5:29pm
Subject: Onboard Air Finished
Hi all,
Well the onboard air system on the CJ is complete, well real close anyhow. Want to solder some connections rather than the wire nuts that are there right now, but otherwise, it is fully functional.
Did a quick post of some pix on the link below if anyone wants to take a look. Some of the pix got lost in the transfer.
Think the cost came in around $125.00 or just a tiny bit more. Would have to sit down and cipher but thought that was a good price!
http://members.cox.net/desertjeep/index.htm
Jim
Tucson
[Non-text portions of this message have been removed]
94861 From: AzVJC Website <azvjc@a...>
Date: Mon Nov 24, 2003 5:40pm
Subject: [TR] Land Use Meeting - Thursday, December 11, 2003 - Reminder
Hello All,Jim Florence is leading a Land Use Meeting trail run on Thursday, December 11, 2003.<br><br>When: 6:00 PM to 9:00 PM
Where: National Guard Armory Phx. 52nd st and McDowell<br>
Exact directions to follow
Rating: 2.0-
Length:
CB Channel:
MGCP Members,<br>
<br>
MARK YOUR CALENDARS!!!<br>
<br>
As announced several months ago the next few months of the MGCP meetings<br>
will rotate from north to south (Phoenix to Tucson) and will be evening<br>
meetings in the local areas. We hope this schedule will enable those that<br>
have been unable to make it to Florence during regular working hours to be<br>
involved in the happenings in the Florence Junction area land planning<br>
partnership.<br>
<br>
We've plowed through the Vision and Mission Statements, the objectives and<br>
goals and are now on a roll towards beginning implementation of the plans<br>
we've all worked towards for three years.<br>
<br>
BLM will have the inventory maps of the MGCP Pilot area available for<br>
verification of trails and areas of concern. Although the non-motorized<br>
trails are not indicated on this particular map we need to identify<br>
non-motorized trails along with motorized trails. Also the Great Western<br>
Trail and issues with it will be discussed. There will be discussions<br>
regarding a trails plan on the State Trust Lands on the west side of this<br>
area.<br>
This is used to add Land Use Meetings to the AzVJC Events List.
http://www.azvjc.org/default.asp?A=1&ID=1092
Click the link above To Add Your Name to the Sign Up List
Thank You,
- The AzVJC Website
94862 From: Rayne gray <raynegray@h...>
Date: Mon Nov 24, 2003 5:53pm
Subject: Shackle inversion kit?
Hey Folks,
I am considering a shackle inversion on my 84 cj7 and I have a my eye on a
"trail master" inversion kit on ebay. It is a bolt on set up. Any feed
back on this piece of equipment and shackle inversions in general?
Thanks
Rayne
84cj7
__________________________________________________ _______________
From the hottest toys to tips on keeping fit this winter, you’ll find a
range of helpful holiday info here.
http://special.msn.com/network/happyholidays.armx
94863 From: blueazjeep <blueazjeep@y...>
Date: Mon Nov 24, 2003 6:26pm
Subject: Re: Shackle inversion kit?
I have not personally done one myself yet(plan to), but I have heard
nothing but good things about them. However, I have never heard of
the Trailmaster setup.
--- In az_vjc@yahoogroups.com, "Rayne gray" <raynegray@h...> wrote:
> Hey Folks,
>
> I am considering a shackle inversion on my 84 cj7 and I have a my
eye on a
> "trail master" inversion kit on ebay. It is a bolt on set up. Any
feed
> back on this piece of equipment and shackle inversions in general?
>
> Thanks
>
> Rayne
> 84cj7
>
> __________________________________________________ _______________
> From the hottest toys to tips on keeping fit this winter, you'll
find a
> range of helpful holiday info here.
> http://special.msn.com/network/happyholidays.armx
94864 From: AzVJC Website <azvjc@a...>
Date: Mon Nov 24, 2003 6:46pm
Subject: [Tech] scrambler - who makes full hard tops?
Does anyone know of anyone who makes full hard tops for scramblers? I have heard of a place called AJ's or something like that, but I can't find any info on them. I don't think they are in the valley, back east some where I think. Any info on full hard tops for scramblers would be helpful. Thx
Ray
Ray Dyer
94865 From: AzVJC Website <azvjc@a...>
Date: Mon Nov 24, 2003 8:06pm
Subject: [TR] Jack Handle - Saturday, December 6, 2003
Hello All,Jeff Titus is leading a Jack Handle trail run on Saturday, December 6, 2003.<br><br>When: Start time around 8am
Where: TOYS FOR TOTS RUN
Rating: 3.5+
Length:
CB Channel: 8
This is one of the trails that we will be running on <br>
Dec.6th The Leader for this run will be Tom Jacobson.(Thanks Tom!)
Jack Handle is a nice but fairly short loop trail that has a number of challenging obstacles. It starts out in a fairly flat wash. It then winds around as the trail gets tighter and tighter.<br>
<br>
There are a few small waterfalls and many table sized boulders to navigate along the way, including a fairly narrow slot that you have to scramble up. This slot makes it a very tight squeeze for full size vehicles (and probably not advisable). The trail can be run in about 2 hours or so.<br>
<br>
The first guy to run this trail didn't see one boulder and ended up using his jack handle as a temporary tie rod to finish the trail so keep your eyes open along the way. When you think you at the end, the trail juts up out on the wash and gives you a view of the whole area. Then you are in for a few roller coasters and a steep drop back to where you started.<br>
<br>
This is not a trail to be tried unless you are an experienced 4-wheeler with a well equipped vehicle. High clearance and some traction devices are required. Water and your camera are a must.<br>
<br>
Enjoy and remember to TREAD Lightly!
http://www.azvjc.org/default.asp?A=1&ID=1107
Click the link above To Add Your Name to the Sign Up List
Thank You,
- The AzVJC Website
94866 From: AzVJC Website <azvjc@a...>
Date: Mon Nov 24, 2003 8:15pm
Subject: [TR] Ajax (Lower) - Saturday, December 6, 2003
Hello All,Jeff Titus is leading an Ajax (Lower) trail run on Saturday, December 6, 2003.<br><br>When: Start time around 8am
Where:
Rating: 3.5+
Length:
CB Channel: 8
This is one of the trails that we will be doing for the TOYS FOR TOTS run. The leader of this run will be <br>
Steve James. (Thanks Steve!)
Lower Ajax wash crosses and continues along portions of the road to the Ajax Mine. It is the typical "wash;" for the most part you cross over and around the rock obstacles. There are a few 2 - 4 ft. waterfalls or narrow rock areas to find your way over or through but there are several by-passes. The wash is set among the rolling hills below the Ajax Mine.<br>
<br>
This trail is fun and a challenge for the moderate 4-wheeler, although this trail is not for the inexperienced driver nor a stock vehicle.<br>
<br>
A rear Traction Device, and 31" + tires are required..<br>
<br>
Enjoy and remember to TREAD Lightly!
http://www.azvjc.org/default.asp?A=1&ID=1108
Click the link above To Add Your Name to the Sign Up List
Thank You,
- The AzVJC Website
94867 From: AzVJC Website <azvjc@a...>
Date: Mon Nov 24, 2003 8:19pm
Subject: [TR] Highway to Hell - Saturday, December 6, 2003
Hello All,Jeff Titus is leading a Highway to Hell trail run on Saturday, December 6, 2003.<br><br>When: Start around 8am
Where:
Rating: 4.5+
Length:
CB Channel: 8
This is one of the trails that we will be diong for the TOYS FOR TOTS run. The leader for this run will be <br>
Steve Sample. (Thanks Steve!)
http://www.azvjc.org/default.asp?A=1&ID=1109
Click the link above To Add Your Name to the Sign Up List
Thank You,
- The AzVJC Website
94868 From: Ray B. <KB7SKV@C...>
Date: Mon Nov 24, 2003 8:24pm
Subject: [OT] (FS) PISTOL
Hi all;
Just a quick note...I have a new Para Ordnance 12-45 .45cal compact
semi-auto. I have two 12 round mags, some ammo, and a nice nylon
holster with spare mag holder. I've fired ONE box of ammo thru it!! I
paid about 650 for the pistol, 50 for the extra mag, around 30 for the
holster, and about 12 bucks a box for the ammo. I cannot use this
particular weapon at work (it's not on our 'list'), so I'm selling it
(need a few extra bucks for x-mas too!) I'm asking $575 o.b.o. for
everything. Drop me an e-mail for details, or to buy if interrested.
Thanks;
Ray
AZAV8ER
94869 From: AzVJC Website <azvjc@a...>
Date: Mon Nov 24, 2003 8:23pm
Subject: [TR] Powerline Trail - Saturday, December 6, 2003
Hello All,Jeff Titus is leading a Powerline Trail trail run on Saturday, December 6, 2003.<br><br>When: Start around 8am
Where:
Rating: 3.5
Length:
CB Channel: 8
This is on of the trails that we will be doing for the TOYS FOR TOTS run. The leader for this run will be Robert Roger.(Thanks Robert!)
The Powerline Trail does a figure 8 as you travel along the powerline, up a off-camber hill and then back down to a grassy meadow and back up another slippery "switchback" trail.<br>
<br>
This trail is truly a challenge for the moderate 4-wheeler. Some type of locking device is recommended, as well as clearance and 31' tires. Totally stock vehicles and/or novice drivers are not recommended. This is an all day trip. Don't forget your lunch & water.<br>
<br>
Enjoy and remember to TREAD Lightly!
http://www.azvjc.org/default.asp?A=1&ID=1110
Click the link above To Add Your Name to the Sign Up List
Thank You,
- The AzVJC Website
94845 From: Fred Wilson <fredtj@c...>
Date: Mon Nov 24, 2003 9:33am
Subject: Re: Re: Ahhh, what happened to my Jeep !!! ;)
Yup, I had seen that also.
For about the same amount of money, I like the PSC ones better. They
don't use nuts and bolts around the outside of the fender, but weld it
instead. I think that looks nicer. You don't have the little gap on the
PSC ones that the MetalFusion ones have.
Also the PSC ones use a solid piece of metal that bolts to all four of
the inner fender well bolts (that's really a big support area).. The MF
ones use two tabs and just two of those inner fender bolts.
Best,
Fred
Dan Dennis wrote:
>Here's a company that makes the same kind of kit...
>
>http://www.metalfusionfab.com/tj_tube_fenders.htm
>
>
>
>--- In az_vjc@yahoogroups.com, Fred Wilson <fredtj@c...> wrote:
>
>
>>Joe, as much as I would like to take credit for "fabbing 'em", I
>>
>>
>can't ;)
>
>
>>Those are the PSC fenders.
>>
>>
>> :)
>> Fred
>>
>>
>>
>>Joe West wrote:
>>
>>
>>
>>>Fred,
>>>
>>>That is one of the nicest jobs I have ever seen for a flat fender
>>>
>>>
>conversion. Good work!
>
>
>>>Kind Regards,
>>>
>>>Joe
>>>
>>>Joe F. West
>>>Applications Consultant Synopsys Corporation
>>>Cell (650)861-1359 Office (480) 733-2147
>>>Blackberry PIN 2005DD8F
>>>
>>>
>>>-----Original Message-----
>>>From: Fred Wilson [mailto:fredtj@c...]
>>>Sent: Sunday, November 23, 2003 1:14 PM
>>>To: az_vjc@yahoogroups.com
>>>Subject: Re: [az_vjc] Ahhh, what happened to my Jeep !!! ;)
>>>
>>>
>>>Ok, here's the rest of it ;)
>>>------------------------------------------------------------------
>>>Took the flare off:
>>>
>>> http://fredtj.com/images/photos/pcsfenders/FlareOff.JPG
>>>
>>>
>>>Let's see, I'm cutting off stuff with the plasma cutter:
>>>
>>>http://fredtj.com/images/photos/pcsfenders/Cutting.JPG
>>>
>>>
>>>Mmmm, it's pretty much all off now:
>>>
>>>http://fredtj.com/images/photos/pcsfenders/Exposed1.JPG
>>>
>>>
>>>Ok, Dan's grinding some of the rough edges off:
>>>
>>>http://fredtj.com/images/photos/pcsfenders/Grind.JPG
>>>
>>>
>>>Dan's trimming some of the other side:
>>>
>>>http://fredtj.com/images/photos/pcsfenders/DanCut.JPG
>>>
>>>
>>>Passenger side:
>>>
>>>http://fredtj.com/images/photos/pcsfenders/Exposed2.JPG
>>>
>>>
>>>Underside shot of the new fender:
>>>
>>> http://fredtj.com/images/photos/pcsfenders/Underside.JPG
>>>
>>>
>>>I'm putting the light trim back on:
>>>
>>>http://fredtj.com/images/photos/pcsfenders/FredLight.JPG
>>>
>>>
>>>Finished ! (Thanks for the help Dan !! )
>>>
>>>Well, almost. I sill have to drill and bolt the top of the fenders.
>>>I also have to drill and bolt that front hole in the rocker guards
>>>
>>>
>to
>
>
>>>the new body panel.
>>>Lastly, I'm looking (in some of the hot rod shops)for some really
>>>
>>>
>small
>
>
>>>bulbs for the front turn signal/parking light, to fit right in the
>>>front, tucked up by the brace. If I can't find anything that'll
>>>
>>>
>fit,
>
>
>>>I'll use some CJ turn signals/parking light (round) and mount the
>>>
>>>
>in the
>
>
>>>front grill, below the headlights:
>>>
>>>http://fredtj.com/images/photos/pcsfenders/Done1.JPG
>>>
>>>http://fredtj.com/images/photos/pcsfenders/Done2.JPG
>>>
>>>http://fredtj.com/images/photos/pcsfenders/Done3.JPG
>>>
>>>http://fredtj.com/images/photos/pcsfenders/Done4.JPG
>>>
>>>
>>>:)
>>>Fred
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>Joe West wrote:
>>>
>>>
>>>
>>>
>>>
>>>>Now... how about some pictures of what remains on the Jeep :)
>>>>
>>>>Joe F. West
>>>>Applications Consultant Synopsys Corporation
>>>>Cell (650)861-1359 Office (480) 733-2147
>>>>Blackberry PIN 2005DD8F
>>>>
>>>>
>>>>-----Original Message-----
>>>>From: Fred Wilson [mailto:fredtj@c...]
>>>>Sent: Sunday, November 23, 2003 10:41 AM
>>>>To: az_vjc@yahoogroups.com
>>>>Subject: [az_vjc] Ahhh, what happened to my Jeep !!! ;)
>>>>
>>>>
>>>>Dan and I crawled all of the front of the Jeep yesterday, with
>>>>instruments of desctuction (sawsall, plasma cutter, cutoff wheel,
>>>>grinder, hammers, etc. ;) ) in hand ;)
>>>>
>>>>http://fredtj.com/images/photos/pcsfenders/Junk1.JPG
>>>>
>>>>http://fredtj.com/images/photos/pcsfenders/Junk2.JPG
>>>>
>>>>
>>>>
>>>>:)
>>>>Fred
>>>>
>>>>
>>>>
>>>>
>>>>Your use of Yahoo! Groups is subject to
>>>>
>>>>
>http://docs.yahoo.com/info/terms/
>
>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>
>>>
>>>Your use of Yahoo! Groups is subject to
>>>
>>>
>http://docs.yahoo.com/info/terms/
>
>
>>>
>>>
>>>
>>>
>>>
>>[Non-text portions of this message have been removed]
>>
>>
>
>
>
>
>Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
>
>
[Non-text portions of this message have been removed]
--------------------------------------------------------------------------------
ADVERTISEMENT
94846 From: AzVJC Website <azvjc@a...>
Date: Mon Nov 24, 2003 9:31am
Subject: [TR] Club BBQ - Sunday, December 7, 2003 - Reminder
Hello All,John Hunter Kanicsar is leading a Club BBQ trail run on Sunday, December 7, 2003.<br><br>When: 3 pm
Where: Hunter Offroad Parking lot
Rating: 2.0-
Length: how ever long
CB Channel: 4
Hunter's 4th Semi-annual AZVJC BBQ!!!<br>
<br>
Since this is so close to Christmas, I figured I would turn this into a AZVJC Christams Party!! I will have tre up and the whole nine.. Be really nice if maybe someone would like to volunteer to be Santa Claus for the kids??<br>
Do the standard routine, bring lots of food. Bring the BBQ's, have a raffle. (PLan on putting together a big one if I can get a good turn out)Also, the New Ramp will be there, so the Ramp Contest can start all overagain. Was also thinking of a contest for the Best Christmas decoreated Jeep..<br>
<br>
<br>
I will have more info avaible soon. I will also keep things going with updates. Just wanted to get this out <br>
so folks could start planning.<br>
<br>
<br>
Talk to everybody soon.<br>
<br>
John k<br>
<br>
<br>
<br>
<br>
<br>
Well, OK, sorry it has taken so long to get this going, (between work and personal things, life has been a bit hectic)
Club BBQ.
http://www.azvjc.org/default.asp?A=1&ID=1056
Click the link above To Add Your Name to the Sign Up List
Thank You,
- The AzVJC Website
94847 From: frank badazxj <BadAZXJ@h...>
Date: Mon Nov 24, 2003 0:12pm
Subject: Sharkys back! :P
He's still got his skillz! Glad to see ya back Sharky!
http://groups.msn.com/badazxj/sharkys1strun.msnw
Frank
http://groups.msn.com/badazxj/badazxj.msnw
__________________________________________________ _______________
Say “goodbye” to busy signals and slow downloads with a high-speed Internet
connection! Prices start at less than $1 a day average.
https://broadband.msn.com (Prices may vary by service area.)
94848 From: azjeeptj <azjeeptj@c...>
Date: Mon Nov 24, 2003 0:26pm
Subject: RE: Re: Jeep vids
I think you might have to look at this route as well!
Mark
-----Original Message-----
From: Lester P. [mailto:AZJeep1@c...]
Sent: Monday, November 24, 2003 6:48 AM
To: az_vjc@yahoogroups.com
Subject: [az_vjc] Re: Jeep vids
Those links worked. Looks like great fun and a well done video to
boot! Maybe I should go that route and save some money with the
mods.
Lester
--- In az_vjc@yahoogroups.com, "Matt OBrien" <makaioo@y...> wrote:
> Try these...
>
> http://www.orp.com.au/RC%20Madness/RC%20MonsterTruck%
20Madness_01.wmv
> http://www.orp.com.au/RC%20Madness/RC%20MonsterTruck%
20Madness_02.wmv
> http://www.orp.com.au/RC%20Madness/RC%20MonsterTruck%
20Madness_02.wmv
>
> --- In az_vjc@yahoogroups.com, "k7ant" <k7ant@f...> wrote:
> > --- In az_vjc@yahoogroups.com, "k7ant" <k7ant@f...> wrote:
> > > For those with high speed connections.....
> > >
> > > from Jeeps unlimited website......
Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
94849 From: Dan Dennis <dannpegg@c...>
Date: Mon Nov 24, 2003 0:53pm
Subject: Re: Ahhh, what happened to my Jeep !!! ;)
Is there a webpage for this company?
--- In az_vjc@yahoogroups.com, Fred Wilson <fredtj@c...> wrote:
> I got the PSC fenders when they were on a special, pre-release
sale, so
> it wouldn't apply now.
>
> The install itself took, mmmm, probably 5 hours or so +-
>
>
> Best,
> Fred
>
>
> Dan Dennis wrote:
>
> >So, Fred...What was the total cost on them? And, how long did the
> >bulk of the job take?
> >
> >I've been thinking about doing the same type of flat fender job on
> >BRUZR...I was thinking of some kind of low profile lights for turn
> >signal/markers and wlding up some type of really small cage to
hold
> >them...Don't know what's out there, though. The side markers on a
YJ
> >is about the size I was thinking...
> >
> >Dan (BRUZR's Daddy)
> >
> >
> >--- In az_vjc@yahoogroups.com, Fred Wilson <fredtj@c...> wrote:
> >
> >
> >>Joe, as much as I would like to take credit for "fabbing 'em", I
> >>
> >>
> >can't ;)
> >
> >
> >>Those are the PSC fenders.
> >>
> >>
> >> :)
> >> Fred
> >>
> >>
> >>
> >>Joe West wrote:
> >>
> >>
> >>
> >>>Fred,
> >>>
> >>>That is one of the nicest jobs I have ever seen for a flat
fender
> >>>
> >>>
> >conversion. Good work!
> >
> >
> >>>Kind Regards,
> >>>
> >>>Joe
> >>>
> >>>Joe F. West
> >>>Applications Consultant Synopsys Corporation
> >>>Cell (650)861-1359 Office (480) 733-2147
> >>>Blackberry PIN 2005DD8F
> >>>
> >>>
> >>>-----Original Message-----
> >>>From: Fred Wilson [mailto:fredtj@c...]
> >>>Sent: Sunday, November 23, 2003 1:14 PM
> >>>To: az_vjc@yahoogroups.com
> >>>Subject: Re: [az_vjc] Ahhh, what happened to my Jeep !!! ;)
> >>>
> >>>
> >>>Ok, here's the rest of it ;)
> >>>-----------------------------------------------------------------
-
> >>>Took the flare off:
> >>>
> >>> http://fredtj.com/images/photos/pcsfenders/FlareOff.JPG
> >>>
> >>>
> >>>Let's see, I'm cutting off stuff with the plasma cutter:
> >>>
> >>>http://fredtj.com/images/photos/pcsfenders/Cutting.JPG
> >>>
> >>>
> >>>Mmmm, it's pretty much all off now:
> >>>
> >>>http://fredtj.com/images/photos/pcsfenders/Exposed1.JPG
> >>>
> >>>
> >>>Ok, Dan's grinding some of the rough edges off:
> >>>
> >>>http://fredtj.com/images/photos/pcsfenders/Grind.JPG
> >>>
> >>>
> >>>Dan's trimming some of the other side:
> >>>
> >>>http://fredtj.com/images/photos/pcsfenders/DanCut.JPG
> >>>
> >>>
> >>>Passenger side:
> >>>
> >>>http://fredtj.com/images/photos/pcsfenders/Exposed2.JPG
> >>>
> >>>
> >>>Underside shot of the new fender:
> >>>
> >>> http://fredtj.com/images/photos/pcsfenders/Underside.JPG
> >>>
> >>>
> >>>I'm putting the light trim back on:
> >>>
> >>>http://fredtj.com/images/photos/pcsfenders/FredLight.JPG
> >>>
> >>>
> >>>Finished ! (Thanks for the help Dan !! )
> >>>
> >>>Well, almost. I sill have to drill and bolt the top of the
fenders.
> >>>I also have to drill and bolt that front hole in the rocker
guards
> >>>
> >>>
> >to
> >
> >
> >>>the new body panel.
> >>>Lastly, I'm looking (in some of the hot rod shops)for some
really
> >>>
> >>>
> >small
> >
> >
> >>>bulbs for the front turn signal/parking light, to fit right in
the
> >>>front, tucked up by the brace. If I can't find anything that'll
> >>>
> >>>
> >fit,
> >
> >
> >>>I'll use some CJ turn signals/parking light (round) and mount
the
> >>>
> >>>
> >in the
> >
> >
> >>>front grill, below the headlights:
> >>>
> >>>http://fredtj.com/images/photos/pcsfenders/Done1.JPG
> >>>
> >>>http://fredtj.com/images/photos/pcsfenders/Done2.JPG
> >>>
> >>>http://fredtj.com/images/photos/pcsfenders/Done3.JPG
> >>>
> >>>http://fredtj.com/images/photos/pcsfenders/Done4.JPG
> >>>
> >>>
> >>>:)
> >>>Fred
> >>>
> >>>
> >>>
> >>>
> >>>
> >>>
> >>>
> >>>
> >>>Joe West wrote:
> >>>
> >>>
> >>>
> >>>
> >>>
> >>>>Now... how about some pictures of what remains on the Jeep :)
> >>>>
> >>>>Joe F. West
> >>>>Applications Consultant Synopsys Corporation
> >>>>Cell (650)861-1359 Office (480) 733-2147
> >>>>Blackberry PIN 2005DD8F
> >>>>
> >>>>
> >>>>-----Original Message-----
> >>>>From: Fred Wilson [mailto:fredtj@c...]
> >>>>Sent: Sunday, November 23, 2003 10:41 AM
> >>>>To: az_vjc@yahoogroups.com
> >>>>Subject: [az_vjc] Ahhh, what happened to my Jeep !!! ;)
> >>>>
> >>>>
> >>>>Dan and I crawled all of the front of the Jeep yesterday, with
> >>>>instruments of desctuction (sawsall, plasma cutter, cutoff
wheel,
> >>>>grinder, hammers, etc. ;) ) in hand ;)
> >>>>
> >>>>http://fredtj.com/images/photos/pcsfenders/Junk1.JPG
> >>>>
> >>>>http://fredtj.com/images/photos/pcsfenders/Junk2.JPG
> >>>>
> >>>>
> >>>>
> >>>>:)
> >>>>Fred
> >>>>
> >>>>
> >>>>
> >>>>
> >>>>Your use of Yahoo! Groups is subject to
> >>>>
> >>>>
> >http://docs.yahoo.com/info/terms/
> >
> >
> >>>>
> >>>>
> >>>>
> >>>>
> >>>>
> >>>>
> >>>>
> >>>
> >>>
> >>>Your use of Yahoo! Groups is subject to
> >>>
> >>>
> >http://docs.yahoo.com/info/terms/
> >
> >
> >>>
> >>>
> >>>
> >>>
> >>>
> >>[Non-text portions of this message have been removed]
> >>
> >>
> >
> >
> >
> >
> >Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
> >
> >
> >
> >
> >
>
>
> [Non-text portions of this message have been removed]
94850 From: intertwingled <intertwingled@q...>
Date: Mon Nov 24, 2003 1:06pm
Subject: *wave* to Steve Campbell ??
Yellow jeep pulled into Home Depot on Country Club right next to my apt
manager's car, where I was helping him tie a door onto the roof. You
have a nice jeep. Here is your
*wave*
Tony
94851 From: Brandon Sudeith <jeepinaz@c...>
Date: Mon Nov 24, 2003 1:36pm
Subject: Re: Ahhh, what happened to my Jeep !!! ;)
http://www.poisonspydercustoms.com/index2.html
Brandon
94852 From: Randy Richards <rrichards13@m...>
Date: Mon Nov 24, 2003 1:53pm
Subject: Re: Wanted: rear bumper to fit 1995 cherokee
--- In az_vjc@yahoogroups.com, "Randy Richards" <rrichards13@m...>
wrote:
> Just bought a 95 cherokee sport. Rear bumper has a poll
> dent......anyone replaced thiers w/ a custom bumper and still has
it
> laying around. I am sure that there is numerous years that will fit.
>
> Call if you want to get rid of it
>
> Randy
> 480-986-9420
94853 From: frank badazxj <BadAZXJ@h...>
Date: Mon Nov 24, 2003 2:02pm
Subject: turkey on the rocks....
so who's all goin? campin? What are you planning to run?
http://www.azrockcrawler.com/_IMAGES/2003/11-03AZONTHEROCKS/11-03AZONTHEROCKS.HTML
Frank
http://groups.msn.com/badazxj/badazxj.msnw
__________________________________________________ _______________
Say “goodbye” to busy signals and slow downloads with a high-speed Internet
connection! Prices start at less than $1 a day average.
https://broadband.msn.com (Prices may vary by service area.)
94854 From: Fred Wilson <fredtj@c...>
Date: Mon Nov 24, 2003 1:23pm
Subject: Re: Re: Ahhh, what happened to my Jeep !!! ;)
http://www.poisonspyder.com/index2.html
:)
Fred
Dan Dennis wrote:
>Is there a webpage for this company?
>
>--- In az_vjc@yahoogroups.com, Fred Wilson <fredtj@c...> wrote:
>
>
>>I got the PSC fenders when they were on a special, pre-release
>>
>>
>sale, so
>
>
>>it wouldn't apply now.
>>
>>The install itself took, mmmm, probably 5 hours or so +-
>>
>>
>>Best,
>>Fred
>>
>>
>>Dan Dennis wrote:
>>
>>
>>
>>>So, Fred...What was the total cost on them? And, how long did the
>>>bulk of the job take?
>>>
>>>I've been thinking about doing the same type of flat fender job on
>>>BRUZR...I was thinking of some kind of low profile lights for turn
>>>signal/markers and wlding up some type of really small cage to
>>>
>>>
>hold
>
>
>>>them...Don't know what's out there, though. The side markers on a
>>>
>>>
>YJ
>
>
>>>is about the size I was thinking...
>>>
>>>Dan (BRUZR's Daddy)
>>>
>>>
>>>--- In az_vjc@yahoogroups.com, Fred Wilson <fredtj@c...> wrote:
>>>
>>>
>>>
>>>
>>>>Joe, as much as I would like to take credit for "fabbing 'em", I
>>>>
>>>>
>>>>
>>>>
>>>can't ;)
>>>
>>>
>>>
>>>
>>>>Those are the PSC fenders.
>>>>
>>>>
>>>> :)
>>>> Fred
>>>>
>>>>
>>>>
>>>>Joe West wrote:
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>>Fred,
>>>>>
>>>>>That is one of the nicest jobs I have ever seen for a flat
>>>>>
>>>>>
>fender
>
>
>>>>>
>>>>>
>>>>>
>>>>>
>>>conversion. Good work!
>>>
>>>
>>>
>>>
>>>>>Kind Regards,
>>>>>
>>>>>Joe
>>>>>
>>>>>Joe F. West
>>>>>Applications Consultant Synopsys Corporation
>>>>>Cell (650)861-1359 Office (480) 733-2147
>>>>>Blackberry PIN 2005DD8F
>>>>>
>>>>>
>>>>>-----Original Message-----
>>>>>From: Fred Wilson [mailto:fredtj@c...]
>>>>>Sent: Sunday, November 23, 2003 1:14 PM
>>>>>To: az_vjc@yahoogroups.com
>>>>>Subject: Re: [az_vjc] Ahhh, what happened to my Jeep !!! ;)
>>>>>
>>>>>
>>>>>Ok, here's the rest of it ;)
>>>>>-----------------------------------------------------------------
>>>>>
>>>>>
>-
>
>
>>>>>Took the flare off:
>>>>>
>>>>>http://fredtj.com/images/photos/pcsfenders/FlareOff.JPG
>>>>>
>>>>>
>>>>>Let's see, I'm cutting off stuff with the plasma cutter:
>>>>>
>>>>>http://fredtj.com/images/photos/pcsfenders/Cutting.JPG
>>>>>
>>>>>
>>>>>Mmmm, it's pretty much all off now:
>>>>>
>>>>>http://fredtj.com/images/photos/pcsfenders/Exposed1.JPG
>>>>>
>>>>>
>>>>>Ok, Dan's grinding some of the rough edges off:
>>>>>
>>>>>http://fredtj.com/images/photos/pcsfenders/Grind.JPG
>>>>>
>>>>>
>>>>>Dan's trimming some of the other side:
>>>>>
>>>>>http://fredtj.com/images/photos/pcsfenders/DanCut.JPG
>>>>>
>>>>>
>>>>>Passenger side:
>>>>>
>>>>>http://fredtj.com/images/photos/pcsfenders/Exposed2.JPG
>>>>>
>>>>>
>>>>>Underside shot of the new fender:
>>>>>
>>>>>http://fredtj.com/images/photos/pcsfenders/Underside.JPG
>>>>>
>>>>>
>>>>>I'm putting the light trim back on:
>>>>>
>>>>>http://fredtj.com/images/photos/pcsfenders/FredLight.JPG
>>>>>
>>>>>
>>>>>Finished ! (Thanks for the help Dan !! )
>>>>>
>>>>>Well, almost. I sill have to drill and bolt the top of the
>>>>>
>>>>>
>fenders.
>
>
>>>>>I also have to drill and bolt that front hole in the rocker
>>>>>
>>>>>
>guards
>
>
>>>>>
>>>>>
>>>>>
>>>>>
>>>to
>>>
>>>
>>>
>>>
>>>>>the new body panel.
>>>>>Lastly, I'm looking (in some of the hot rod shops)for some
>>>>>
>>>>>
>really
>
>
>>>>>
>>>>>
>>>>>
>>>>>
>>>small
>>>
>>>
>>>
>>>
>>>>>bulbs for the front turn signal/parking light, to fit right in
>>>>>
>>>>>
>the
>
>
>>>>>front, tucked up by the brace. If I can't find anything that'll
>>>>>
>>>>>
>>>>>
>>>>>
>>>fit,
>>>
>>>
>>>
>>>
>>>>>I'll use some CJ turn signals/parking light (round) and mount
>>>>>
>>>>>
>the
>
>
>>>>>
>>>>>
>>>>>
>>>>>
>>>in the
>>>
>>>
>>>
>>>
>>>>>front grill, below the headlights:
>>>>>
>>>>>http://fredtj.com/images/photos/pcsfenders/Done1.JPG
>>>>>
>>>>>http://fredtj.com/images/photos/pcsfenders/Done2.JPG
>>>>>
>>>>>http://fredtj.com/images/photos/pcsfenders/Done3.JPG
>>>>>
>>>>>http://fredtj.com/images/photos/pcsfenders/Done4.JPG
>>>>>
>>>>>
>>>>>:)
>>>>>Fred
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>Joe West wrote:
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>>Now... how about some pictures of what remains on the Jeep :)
>>>>>>
>>>>>>Joe F. West
>>>>>>Applications Consultant Synopsys Corporation
>>>>>>Cell (650)861-1359 Office (480) 733-2147
>>>>>>Blackberry PIN 2005DD8F
>>>>>>
>>>>>>
>>>>>>-----Original Message-----
>>>>>>From: Fred Wilson [mailto:fredtj@c...]
>>>>>>Sent: Sunday, November 23, 2003 10:41 AM
>>>>>>To: az_vjc@yahoogroups.com
>>>>>>Subject: [az_vjc] Ahhh, what happened to my Jeep !!! ;)
>>>>>>
>>>>>>
>>>>>>Dan and I crawled all of the front of the Jeep yesterday, with
>>>>>>instruments of desctuction (sawsall, plasma cutter, cutoff
>>>>>>
>>>>>>
>wheel,
>
>
>>>>>>grinder, hammers, etc. ;) ) in hand ;)
>>>>>>
>>>>>>http://fredtj.com/images/photos/pcsfenders/Junk1.JPG
>>>>>>
>>>>>>http://fredtj.com/images/photos/pcsfenders/Junk2.JPG
>>>>>>
>>>>>>
>>>>>>
>>>>>>:)
>>>>>>Fred
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>Your use of Yahoo! Groups is subject to
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>http://docs.yahoo.com/info/terms/
>>>
>>>
>>>
>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>Your use of Yahoo! Groups is subject to
>>>>>
>>>>>
>>>>>
>>>>>
>>>http://docs.yahoo.com/info/terms/
>>>
>>>
>>>
>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>[Non-text portions of this message have been removed]
>>>>
>>>>
>>>>
>>>>
>>>
>>>
>>>Your use of Yahoo! Groups is subject to
>>>
>>>
>http://docs.yahoo.com/info/terms/
>
>
>>>
>>>
>>>
>>>
>>>
>>[Non-text portions of this message have been removed]
>>
>>
>
>
>
>
>Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
>
>
[Non-text portions of this message have been removed]
94855 From: <tandljacobson@a...>
Date: Mon Nov 24, 2003 9:53am
Subject: RE: Land Use Permit - Martinez Cabin
Thanks for putting up with us, Sandee. I was at the freeway opening and had
told Bill that they we applications and if he could find who took them home,
he could get one from them. While we're complaining about the permit process,
we should gripe about the fact that the info is in a tri-fold pamphlet. I
mean, that takes a lot of effort to open up and see what's actaully in there
right? ;-)
Tom
Message: 16
Date: Mon, 24 Nov 2003 07:35:20 -0700
From: "Sandee McCullen" <mccullen@c...>
Subject: RE: Land Use Permit - Martinez Cabin
I think I've already answered this but here's info for files again.........
and yes Bob, there were only information brochures available at the highway
opening. Not even applications. Hopefully I can convince them to allow the
shops and myself to sell them again................. This whole thing is
beyond stupid but until we can get this procedure changed I guess we have to
play the game. Sandee
[Non-text portions of this message have been removed]
94856 From: Randy Richards <rrichards13@m...>
Date: Mon Nov 24, 2003 3:06pm
Subject: Fwd: FW: Michael Jackson On The Run
>
__________________________________________________ _______________
Set yourself up for fun at home! Get tips on home entertainment equipment,
video game reviews, and more here.
http://special.msn.com/home/homeent.armx
[Non-text portions of this message have been removed]
94857 From: steven.campbell <steven.campbell@c...>
Date: Mon Nov 24, 2003 3:20pm
Subject: Re: *wave* to Steve Campbell ??
Thanks much. Here is a wave back at you!
Steve
----- Original Message -----
From: "intertwingled" <intertwingled@q...>
To: <az_vjc@yahoogroups.com>
Sent: Monday, November 24, 2003 2:06 PM
Subject: [az_vjc] *wave* to Steve Campbell ??
> Yellow jeep pulled into Home Depot on Country Club right next to my apt
> manager's car, where I was helping him tie a door onto the roof. You
> have a nice jeep. Here is your
>
> *wave*
>
> Tony
>
>
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
94858 From: Hackle <hackle@q...>
Date: Mon Nov 24, 2003 5:09pm
Subject: Promoting Table Mesa Clean-up
I went to a Popular Outdoor store on Bell and 27th Ave to ask them to post
up a flyer. They told me to stick a few on a rack.
I went to The new Outdoor Warehouse at I-17 and Yorkshire and they posted
two on the main entry board and even asked who to contact to get more.
They will get my outdoor money from now on!
The Outdoor Warehouse also had a live broadcast from KNIX at the time. I
gave them a flier and they will work on PSA's for the event near the end of
Jan.
This year the AZVJC is sponsoring this event if we get half the input we
usually do for events I am sure we can make it even bigger then last year,
(about 350 showed up).
I will hit Game and Fish and some OHV stores in the area this week also.
Get the fliers out early and often.
Jim F.
Arizona RockRats President
http://www.rockrats.org/
"I refuse to belong to any group that would have me as a member" Groucho
Marx
Member of the original dirty half dozen.
http://www.users.qwest.net/~jkflorence/
94859 From: blueazjeep <blueazjeep@y...>
Date: Mon Nov 24, 2003 5:22pm
Subject: HELP with steering stabilizer
I just bought an ES2000 steering stabilizer, the problem is, that the
kit comes with a bolt that fits snug inside the bushing...but it will
not work on my YJ, I have to use the stock bolt and it is too small
and the bolt will wobble around inside the bushing. The kit also
comes with a sleeve but it is the same size as my bolt, so that will
not work either! Any suggestions are greatly appreciated!
TIA, Greg
94860 From: Jim Russell <desertjeep@c...>
Date: Mon Nov 24, 2003 5:29pm
Subject: Onboard Air Finished
Hi all,
Well the onboard air system on the CJ is complete, well real close anyhow. Want to solder some connections rather than the wire nuts that are there right now, but otherwise, it is fully functional.
Did a quick post of some pix on the link below if anyone wants to take a look. Some of the pix got lost in the transfer.
Think the cost came in around $125.00 or just a tiny bit more. Would have to sit down and cipher but thought that was a good price!
http://members.cox.net/desertjeep/index.htm
Jim
Tucson
[Non-text portions of this message have been removed]
94861 From: AzVJC Website <azvjc@a...>
Date: Mon Nov 24, 2003 5:40pm
Subject: [TR] Land Use Meeting - Thursday, December 11, 2003 - Reminder
Hello All,Jim Florence is leading a Land Use Meeting trail run on Thursday, December 11, 2003.<br><br>When: 6:00 PM to 9:00 PM
Where: National Guard Armory Phx. 52nd st and McDowell<br>
Exact directions to follow
Rating: 2.0-
Length:
CB Channel:
MGCP Members,<br>
<br>
MARK YOUR CALENDARS!!!<br>
<br>
As announced several months ago the next few months of the MGCP meetings<br>
will rotate from north to south (Phoenix to Tucson) and will be evening<br>
meetings in the local areas. We hope this schedule will enable those that<br>
have been unable to make it to Florence during regular working hours to be<br>
involved in the happenings in the Florence Junction area land planning<br>
partnership.<br>
<br>
We've plowed through the Vision and Mission Statements, the objectives and<br>
goals and are now on a roll towards beginning implementation of the plans<br>
we've all worked towards for three years.<br>
<br>
BLM will have the inventory maps of the MGCP Pilot area available for<br>
verification of trails and areas of concern. Although the non-motorized<br>
trails are not indicated on this particular map we need to identify<br>
non-motorized trails along with motorized trails. Also the Great Western<br>
Trail and issues with it will be discussed. There will be discussions<br>
regarding a trails plan on the State Trust Lands on the west side of this<br>
area.<br>
This is used to add Land Use Meetings to the AzVJC Events List.
http://www.azvjc.org/default.asp?A=1&ID=1092
Click the link above To Add Your Name to the Sign Up List
Thank You,
- The AzVJC Website
94862 From: Rayne gray <raynegray@h...>
Date: Mon Nov 24, 2003 5:53pm
Subject: Shackle inversion kit?
Hey Folks,
I am considering a shackle inversion on my 84 cj7 and I have a my eye on a
"trail master" inversion kit on ebay. It is a bolt on set up. Any feed
back on this piece of equipment and shackle inversions in general?
Thanks
Rayne
84cj7
__________________________________________________ _______________
From the hottest toys to tips on keeping fit this winter, you’ll find a
range of helpful holiday info here.
http://special.msn.com/network/happyholidays.armx
94863 From: blueazjeep <blueazjeep@y...>
Date: Mon Nov 24, 2003 6:26pm
Subject: Re: Shackle inversion kit?
I have not personally done one myself yet(plan to), but I have heard
nothing but good things about them. However, I have never heard of
the Trailmaster setup.
--- In az_vjc@yahoogroups.com, "Rayne gray" <raynegray@h...> wrote:
> Hey Folks,
>
> I am considering a shackle inversion on my 84 cj7 and I have a my
eye on a
> "trail master" inversion kit on ebay. It is a bolt on set up. Any
feed
> back on this piece of equipment and shackle inversions in general?
>
> Thanks
>
> Rayne
> 84cj7
>
> __________________________________________________ _______________
> From the hottest toys to tips on keeping fit this winter, you'll
find a
> range of helpful holiday info here.
> http://special.msn.com/network/happyholidays.armx
94864 From: AzVJC Website <azvjc@a...>
Date: Mon Nov 24, 2003 6:46pm
Subject: [Tech] scrambler - who makes full hard tops?
Does anyone know of anyone who makes full hard tops for scramblers? I have heard of a place called AJ's or something like that, but I can't find any info on them. I don't think they are in the valley, back east some where I think. Any info on full hard tops for scramblers would be helpful. Thx
Ray
Ray Dyer
94865 From: AzVJC Website <azvjc@a...>
Date: Mon Nov 24, 2003 8:06pm
Subject: [TR] Jack Handle - Saturday, December 6, 2003
Hello All,Jeff Titus is leading a Jack Handle trail run on Saturday, December 6, 2003.<br><br>When: Start time around 8am
Where: TOYS FOR TOTS RUN
Rating: 3.5+
Length:
CB Channel: 8
This is one of the trails that we will be running on <br>
Dec.6th The Leader for this run will be Tom Jacobson.(Thanks Tom!)
Jack Handle is a nice but fairly short loop trail that has a number of challenging obstacles. It starts out in a fairly flat wash. It then winds around as the trail gets tighter and tighter.<br>
<br>
There are a few small waterfalls and many table sized boulders to navigate along the way, including a fairly narrow slot that you have to scramble up. This slot makes it a very tight squeeze for full size vehicles (and probably not advisable). The trail can be run in about 2 hours or so.<br>
<br>
The first guy to run this trail didn't see one boulder and ended up using his jack handle as a temporary tie rod to finish the trail so keep your eyes open along the way. When you think you at the end, the trail juts up out on the wash and gives you a view of the whole area. Then you are in for a few roller coasters and a steep drop back to where you started.<br>
<br>
This is not a trail to be tried unless you are an experienced 4-wheeler with a well equipped vehicle. High clearance and some traction devices are required. Water and your camera are a must.<br>
<br>
Enjoy and remember to TREAD Lightly!
http://www.azvjc.org/default.asp?A=1&ID=1107
Click the link above To Add Your Name to the Sign Up List
Thank You,
- The AzVJC Website
94866 From: AzVJC Website <azvjc@a...>
Date: Mon Nov 24, 2003 8:15pm
Subject: [TR] Ajax (Lower) - Saturday, December 6, 2003
Hello All,Jeff Titus is leading an Ajax (Lower) trail run on Saturday, December 6, 2003.<br><br>When: Start time around 8am
Where:
Rating: 3.5+
Length:
CB Channel: 8
This is one of the trails that we will be doing for the TOYS FOR TOTS run. The leader of this run will be <br>
Steve James. (Thanks Steve!)
Lower Ajax wash crosses and continues along portions of the road to the Ajax Mine. It is the typical "wash;" for the most part you cross over and around the rock obstacles. There are a few 2 - 4 ft. waterfalls or narrow rock areas to find your way over or through but there are several by-passes. The wash is set among the rolling hills below the Ajax Mine.<br>
<br>
This trail is fun and a challenge for the moderate 4-wheeler, although this trail is not for the inexperienced driver nor a stock vehicle.<br>
<br>
A rear Traction Device, and 31" + tires are required..<br>
<br>
Enjoy and remember to TREAD Lightly!
http://www.azvjc.org/default.asp?A=1&ID=1108
Click the link above To Add Your Name to the Sign Up List
Thank You,
- The AzVJC Website
94867 From: AzVJC Website <azvjc@a...>
Date: Mon Nov 24, 2003 8:19pm
Subject: [TR] Highway to Hell - Saturday, December 6, 2003
Hello All,Jeff Titus is leading a Highway to Hell trail run on Saturday, December 6, 2003.<br><br>When: Start around 8am
Where:
Rating: 4.5+
Length:
CB Channel: 8
This is one of the trails that we will be diong for the TOYS FOR TOTS run. The leader for this run will be <br>
Steve Sample. (Thanks Steve!)
http://www.azvjc.org/default.asp?A=1&ID=1109
Click the link above To Add Your Name to the Sign Up List
Thank You,
- The AzVJC Website
94868 From: Ray B. <KB7SKV@C...>
Date: Mon Nov 24, 2003 8:24pm
Subject: [OT] (FS) PISTOL
Hi all;
Just a quick note...I have a new Para Ordnance 12-45 .45cal compact
semi-auto. I have two 12 round mags, some ammo, and a nice nylon
holster with spare mag holder. I've fired ONE box of ammo thru it!! I
paid about 650 for the pistol, 50 for the extra mag, around 30 for the
holster, and about 12 bucks a box for the ammo. I cannot use this
particular weapon at work (it's not on our 'list'), so I'm selling it
(need a few extra bucks for x-mas too!) I'm asking $575 o.b.o. for
everything. Drop me an e-mail for details, or to buy if interrested.
Thanks;
Ray
AZAV8ER
94869 From: AzVJC Website <azvjc@a...>
Date: Mon Nov 24, 2003 8:23pm
Subject: [TR] Powerline Trail - Saturday, December 6, 2003
Hello All,Jeff Titus is leading a Powerline Trail trail run on Saturday, December 6, 2003.<br><br>When: Start around 8am
Where:
Rating: 3.5
Length:
CB Channel: 8
This is on of the trails that we will be doing for the TOYS FOR TOTS run. The leader for this run will be Robert Roger.(Thanks Robert!)
The Powerline Trail does a figure 8 as you travel along the powerline, up a off-camber hill and then back down to a grassy meadow and back up another slippery "switchback" trail.<br>
<br>
This trail is truly a challenge for the moderate 4-wheeler. Some type of locking device is recommended, as well as clearance and 31' tires. Totally stock vehicles and/or novice drivers are not recommended. This is an all day trip. Don't forget your lunch & water.<br>
<br>
Enjoy and remember to TREAD Lightly!
http://www.azvjc.org/default.asp?A=1&ID=1110
Click the link above To Add Your Name to the Sign Up List
Thank You,
- The AzVJC Website