blooddrive
01-08-2004, 09:07 PM
88576-88600
88576 From: Joe West <arizonajeep@c...>
Date: Sun Aug 3, 2003 8:42am
Subject: RE: Recommendation For Shops
I can. :)
Hopefully, people understand that when someone asks for a
recommendation, it is with the understanding that the answer will
reflect the respondent's experience base and disclaimers about not
having tried all the repair shops in the valley, the state, the nation,
the world, and the universe... are not necessary.
You will not find a 4wd repair shop anywhere in the valley who can touch
the years of 4WD mechanical experience you'll find at 4 Wheeler's
Supply.
Couple their experience with the fact that they stand behind their labor
and parts 100% and throw in the fact that their employees have
exceptional integrity and you'll end up with an experience which can't
be matched anywhere in Arizona.
Forget the disclaimers and the YMMV crap... if you have a problem at 4
Wheeler's Supply, go see the owner Brian and he will resolve the issue.
Great place run by great people... and while I can't endorse businesses
I have not utilized, I can and do endorse 4 Wheeler's Supply.
Hands Down the best.
DISCLAIMERS:
"The reader of this email by the sole act of reading this email agrees
to the terms and conditions contained within this disclaimer and
understands that failure to understand the disclaimer or the inability
to read do not constitute an affirmative defense in litigation
surrounding said disclaimer. The reader should understand that the
respondent to this email has not personally tried every automotive
mechanical repair shop in the entire universe, and the reader of this
email must understand that it is very likely that there are other repair
shops in the universe who do as good a job as does 4 Wheeler's Supply.
The respondent does not work for 4 Wheeler's Supply (hereafter known as
the man). The respondent does not receive kick-backs or other incentives
from the "man", nor does the respondent have any other ties to the "man"
of a personal or financial nature. The opinions offered in this email
are subject to the terms and conditions specified in the 911 page
document titled "Reading and understanding emails from Joe West"
(hereafter known as "common sense") which is held on file for viewing at
the personal residence of Joe West. Document viewing hours are between
the times of 7:01PM and 7:02PM daily, except for the times when the
respondent is not home. The reader of this email agrees to the terms
and conditions of "common sense" and recognizes that failure to apply
"common sense" to emails from the respondent will result in a breach of
this contract and denial of all possible claims under United States law.
Any questions or comments regarding the "man" or "common sense" may be
directed to the respondent at the following email address:
pleasekeepyouropinionstoyourselfanddontnigpickmyem ailsinthemorningcausei
tputsmeinabadmoodwhichwillquitepossiblycausemetowr iteincrediblylongdiatr
ibeswhichinalllikelyhoodyouwillnotwanttoread@would itbotheryouimmenslyifi
toldyouthatireallydontcarewhatyouthink.com
"
END DISCLAIMER
-----Original Message-----
From: Stu Olson [mailto:solson8@q...]
Sent: Sunday, August 03, 2003 7:50 AM
To: az_vjc@yahoogroups.com
Subject: RE: [az_vjc] Recommendation For Shops
4 Wheelers Supply did my axles and did a nice job.
Toys by Troy just did my Advanced Adapters SYE
http://www.stu-offroad.com/preview/preview-00.jpg (among several days
worth of other work) and it came out great.
I couldn't make a personal recommendation that says hands down one is
better than all the rest, since I've only used two shops in the valley.
;>) I can say that both treated me well and I've had no problems with
any of the work they have done.
Stu
Stu Olson
www.stu-offroad.com
-----Original Message-----
From: Joe West [mailto:arizonajeep@c...]
Sent: Sunday, August 03, 2003 7:32 AM
To: 'sdrichm'; az_vjc@yahoogroups.com
Subject: RE: [az_vjc] Recommendation For Shops
Four Wheeler's Supply... hands down the best.
Joe West
-----Original Message-----
From: sdrichm [mailto:sdrichm@c...]
Sent: Saturday, August 02, 2003 9:58 PM
To: az_vjc@yahoogroups.com
Subject: [az_vjc] Recommendation For Shops
I need to find a good trustworthy shop to install a SYE on my 2003
TJ. Not someone that is out to charge me for everything I've got,
but someone that I can trust and start using them from here on out.
Steve
Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
--------------------------------------------------------------------------------
ADVERTISEMENT
88577 From: <azice626@a...>
Date: Sun Aug 3, 2003 5:07am
Subject: Re: Re: H2 in White Tanks area....
sorry Joe... :-) .....actually, since you stripped down, I think I have more
stickers than you....
T.J. Gill
75 CJ5 w/Stuff
90 XJ w/Stuff, Too
See Spot Run......CJ Crawl
[Non-text portions of this message have been removed]
88578 From: Chris Krieg <rv6a@c...>
Date: Sun Aug 3, 2003 9:20am
Subject: Re: Recommendation For Shops
LMAO!!!
Oh yeah, and one more vote for 4 Wheelers Supply from me. Best I've
experienced and they stand behind their work.
Chris
On Sunday, August 3, 2003, at 08:42 AM, Joe West wrote:
> I can. :)
>
> Hopefully, people understand that when someone asks for a
> recommendation, it is with the understanding that the answer will
> reflect the respondent's experience base and disclaimers about not
> having tried all the repair shops in the valley, the state, the nation,
> the world, and the universe... are not necessary.
>
> You will not find a 4wd repair shop anywhere in the valley who can
> touch
> the years of 4WD mechanical experience you'll find at 4 Wheeler's
> Supply.
> Couple their experience with the fact that they stand behind their
> labor
> and parts 100% and throw in the fact that their employees have
> exceptional integrity and you'll end up with an experience which can't
> be matched anywhere in Arizona.
>
> Forget the disclaimers and the YMMV crap... if you have a problem at 4
> Wheeler's Supply, go see the owner Brian and he will resolve the issue.
>
> Great place run by great people... and while I can't endorse businesses
> I have not utilized, I can and do endorse 4 Wheeler's Supply.
>
> Hands Down the best.
>
> DISCLAIMERS:
>
> "The reader of this email by the sole act of reading this email agrees
> to the terms and conditions contained within this disclaimer and
> understands that failure to understand the disclaimer or the inability
> to read do not constitute an affirmative defense in litigation
> surrounding said disclaimer. The reader should understand that the
> respondent to this email has not personally tried every automotive
> mechanical repair shop in the entire universe, and the reader of this
> email must understand that it is very likely that there are other
> repair
> shops in the universe who do as good a job as does 4 Wheeler's Supply.
> The respondent does not work for 4 Wheeler's Supply (hereafter known as
> the man). The respondent does not receive kick-backs or other
> incentives
> from the "man", nor does the respondent have any other ties to the
> "man"
> of a personal or financial nature. The opinions offered in this email
> are subject to the terms and conditions specified in the 911 page
> document titled "Reading and understanding emails from Joe West"
> (hereafter known as "common sense") which is held on file for viewing
> at
> the personal residence of Joe West. Document viewing hours are between
> the times of 7:01PM and 7:02PM daily, except for the times when the
> respondent is not home. The reader of this email agrees to the terms
> and conditions of "common sense" and recognizes that failure to apply
> "common sense" to emails from the respondent will result in a breach of
> this contract and denial of all possible claims under United States
> law.
> Any questions or comments regarding the "man" or "common sense" may be
> directed to the respondent at the following email address:
>
> pleasekeepyouropinionstoyourselfanddontnigpickmyem ailsinthemorningcause
> i
> tputsmeinabadmoodwhichwillquitepossiblycausemetowr iteincrediblylongdiat
> r
> ibeswhichinalllikelyhoodyouwillnotwanttoread@would itbotheryouimmenslyif
> i
> toldyouthatireallydontcarewhatyouthink.com
>
> "
>
> END DISCLAIMER
>
> -----Original Message-----
> From: Stu Olson [mailto:solson8@q...]
> Sent: Sunday, August 03, 2003 7:50 AM
> To: az_vjc@yahoogroups.com
> Subject: RE: [az_vjc] Recommendation For Shops
>
> 4 Wheelers Supply did my axles and did a nice job.
>
> Toys by Troy just did my Advanced Adapters SYE
> http://www.stu-offroad.com/preview/preview-00.jpg (among several days
> worth of other work) and it came out great.
>
> I couldn't make a personal recommendation that says hands down one is
> better than all the rest, since I've only used two shops in the valley.
> ;>) I can say that both treated me well and I've had no problems with
> any of the work they have done.
>
> Stu
>
>
> Stu Olson
> www.stu-offroad.com
>
>
> -----Original Message-----
> From: Joe West [mailto:arizonajeep@c...]
> Sent: Sunday, August 03, 2003 7:32 AM
> To: 'sdrichm'; az_vjc@yahoogroups.com
> Subject: RE: [az_vjc] Recommendation For Shops
>
> Four Wheeler's Supply... hands down the best.
>
> Joe West
>
> -----Original Message-----
> From: sdrichm [mailto:sdrichm@c...]
> Sent: Saturday, August 02, 2003 9:58 PM
> To: az_vjc@yahoogroups.com
> Subject: [az_vjc] Recommendation For Shops
>
> I need to find a good trustworthy shop to install a SYE on my 2003
> TJ. Not someone that is out to charge me for everything I've got,
> but someone that I can trust and start using them from here on out.
>
> Steve
>
>
>
>
> Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
>
>
>
>
>
>
> Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
>
>
>
>
>
>
> Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
>
>
>
>
>
>
> Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
>
>
88579 From: <SteelPonyCowboy@a...>
Date: Sun Aug 3, 2003 5:35am
Subject: HELP ! Horrible "grinding" noise in ZJ
I have a terrible grinding (dont know how to describe it any better) noise
in the front of my 98 ZJ somewhere with just a hint of vibration.....only
happens when moving and gets louder as you go faster. Its not the brakes, any
ideas ??????
88580 From: parbetter1 <parbetter1@c...>
Date: Sun Aug 3, 2003 9:51am
Subject: For Sale - 97 Rockcrawler TJ $7000
I have just ordered a new truck and am now selling the toy. Its a
97 TJ sport, with 79,000 miles. It has a 4 inch Teraflex lift, Arbs
front and back, 4.56 ring gears,beard seats, full rollcage, 35 x
14.50 radial super swampers, on board air, just to name a few
modifications. All work was done by 4-wheelers supply and Shannon
Campbell Ent. All body panels are straight with no dents. Have
receipts for all mods and work. Call William at 602-502-2332.
88581 From: Joe West <arizonajeep@c...>
Date: Sun Aug 3, 2003 10:08am
Subject: RE: HELP ! Horrible "grinding" noise in ZJ
My guesses:
1. Front Axle Bearing assembly
2. Front Axle Gears.
3. Front Axle Lubricant.
Joe West
-----Original Message-----
From: SteelPonyCowboy@a... [mailto:SteelPonyCowboy@a...]
Sent: Sunday, August 03, 2003 9:36 AM
To: az_vjc@yahoogroups.com
Subject: [az_vjc] HELP ! Horrible "grinding" noise in ZJ
I have a terrible grinding (dont know how to describe it any better)
noise
in the front of my 98 ZJ somewhere with just a hint of
vibration.....only
happens when moving and gets louder as you go faster. Its not the
brakes, any
ideas ??????
Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
88582 From: <hunteroffroad@a...>
Date: Sun Aug 3, 2003 6:29am
Subject: Re: Recommendation For Shops
THAT was by FAR that funniest thing I have ever READ ..... That was
classic.... You should go into disclaimer biz..
John k
[Non-text portions of this message have been removed]
88583 From: blackxj2000 <mark_cur@c...>
Date: Sun Aug 3, 2003 11:00am
Subject: Motor lopes and surges
99xj 4.0 Motor lopes at idle and surges at speed.Hope someone can
help.
88584 From: Stu Olson <solson8@q...>
Date: Sun Aug 3, 2003 11:19am
Subject: RE: For Sale - 97 Rockcrawler TJ $7000
Oh boy, now you went and did it....you shouldn't have mentioned that
Shannon Campbell Ent. worked on your TJ. (They are not on JoeW's list
of "hands down" approved 4x4 shops!) LOL
But on a more serious note, your '97 sounds pretty nice and I'm sure it
will make a nice rig for who ever decides to buy it....and good luck
with your new truck.
Stu
Stu Olson
www.stu-offroad.com
-----Original Message-----
From: parbetter1 [mailto:parbetter1@c...]
Sent: Sunday, August 03, 2003 9:51 AM
To: az_vjc@yahoogroups.com
Subject: [az_vjc] For Sale - 97 Rockcrawler TJ $7000
I have just ordered a new truck and am now selling the toy. Its a
97 TJ sport, with 79,000 miles. It has a 4 inch Teraflex lift, Arbs
front and back, 4.56 ring gears,beard seats, full rollcage, 35 x
14.50 radial super swampers, on board air, just to name a few
modifications. All work was done by 4-wheelers supply and Shannon
Campbell Ent. All body panels are straight with no dents. Have
receipts for all mods and work. Call William at 602-502-2332.
Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
88585 From: intertwingled <intertwingled@q...>
Date: Sat Aug 2, 2003 1:43pm
Subject: Re: Motor lopes and surges
Well... I blame everything on the engine computer, myself. =P
Looks like mine (on my 94 YJ) is getting read to burn itself out
again (the computer engines on 94 YJ's are located in the engine
compartment and my theory is the computer chips cook themselves
to death in the engine heat + high heat of Arizona summers. )
Looks like my project to get the engine computer moved into
the driver's compartment didn't happen soon enough =(
Tony
blackxj2000 wrote:
>99xj 4.0 Motor lopes at idle and surges at speed.Hope someone can
>help.
>
>
>
>
>Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
>
>
>
88586 From: intertwingled <intertwingled@q...>
Date: Sat Aug 2, 2003 1:45pm
Subject: Re: Re: one more reason to hate Chrysler
Well, all in all, no great loss, because I am planning on replacing the
entire
air box with a home grown snorkel made out of Ace Hardware PVC tubing
and joints. =) So eventally the horn would have been outta there anyway.
Tony
chaton602phx@a... wrote:
>But all in all, it doesn't work!
>
>Anthony
>
>
>[Non-text portions of this message have been removed]
>
>
>
>
>Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
>
>
>
88587 From: AzVJC Website <azvjc@a...>
Date: Sun Aug 3, 2003 2:51pm
Subject: [FS] Vendor Items Added
<p>
<font face=Arial>
Hello Members of the AzVJC,<br>
Kirk Sanich has just added some items to the Classified section of the AzVJC Website that may be of
interest to you. To see these items
<a href='http://www.azvjc.org/default.asp?A=X&ID=ForSale/default.asp?C=10'>
Click Here
</a>
or goto the website classifieds and select 'Vendor' from the list.<br>
Thank You,<br><br>
- The AzVJC Website<br><br>
</font>
</p>
88588 From: <chaton602phx@a...>
Date: Sun Aug 3, 2003 0:38pm
Subject: Re: Re: one more reason to hate Chrysler
now thats what I'm wanting to do. you have insturctions for that?
[Non-text portions of this message have been removed]
88589 From: xxnickthedickxx <squarelights@h...>
Date: Sun Aug 3, 2003 8:28pm
Subject: ( TJ ) Who Had Rear Swing Tire Carrier For Sale?
I have a friend who might want to get a swing out tire carrier for
his tj so if you have one for sale shoot me an email.
thanks,
nick
88590 From: Brandon Reid <mikdiamon@c...>
Date: Sun Aug 3, 2003 8:46pm
Subject: Who bought my Toys by Troy front bumper? (Brandon Reid)
please email me
Thanks
Brandon
88591 From: oveson2 <oveson.l@j...>
Date: Sun Aug 3, 2003 9:21pm
Subject: Rick Beer
Which Discount Tire Store does Rick Beer work at? Need to talk to him.
88592 From: Brandon Reid <mikdiamon@c...>
Date: Sun Aug 3, 2003 9:30pm
Subject: Re: Rick Beer
Discount Tire
(602)942-9603
407 W. Bell Road
Phoenix, AZ
--- In az_vjc@yahoogroups.com, "oveson2" <oveson.l@j...> wrote:
> Which Discount Tire Store does Rick Beer work at? Need to talk to
him.
88593 From: <Steveslifer@a...>
Date: Sun Aug 3, 2003 5:35pm
Subject: cargo net
Where would be a good place to buy a cargo net for the interior of a 2000 TJ?
[Non-text portions of this message have been removed]
88594 From: AzVJC Website <azvjc@a...>
Date: Sun Aug 3, 2003 10:03pm
Subject: [TR] Rubicon - Saturday, August 9, 2003 - Reminder
Hello All,John Halverson is leading a Rubicon trail run on Saturday, August 9, 2003.<br><br>When: 08-09-2003
Where: Meet at Loves Truck Stop, 6am Sat. 08-09-03 Rollout at 6:30 am
Rating: 4.0+
Length: 6 days
CB Channel: 4
THE RUBICON TRIP IS ALIVE..<br>
<br>
Leaving Phoenix, Sat. Aug. 09. <br>
Travel to Loon Lake, first nights camp. Start the trail Mon. Aug. 11<br>
Second night camp at Spider Lake, Third at Rubicon Springs.<br>
Thursday and Friday, travel home.<br>
<br>
We may be able to cut a day out of this if we get off the trail early enough Wed. to get a start home. It kind of depends on breakage and how well we are doing on the trail.<br>
<br>
Meet at Loves Truck stop Sat Aug. 09 at 6 am, roll out at 6:30 am<br>
<br>
John 602-568-5711
<a href=" http://www.rubicon-trail.com/Rubicon/index.html" target="_blank">Click here for more info.</a>
http://www.azvjc.org/default.asp?A=1&ID=723
Click the link above To Add Your Name to the Sign Up List
Thank You,
- The AzVJC Website
88595 From: BradP Kilgore <brad.kilgore@p...>
Date: Sun Aug 3, 2003 10:25pm
Subject: RE: cargo net
www.4x4groupbuy.com
Jason is local so you can save shipping if you want.
Brad
-----Original Message-----
From: Steveslifer@a... [mailto:Steveslifer@a...]
Sent: Sun 8/3/2003 9:35 PM
To: az_vjc@yahoogroups.com
Cc:
Subject: [az_vjc] cargo net
Where would be a good place to buy a cargo net for the interior of a 2000 TJ?
[Non-text portions of this message have been removed]
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
88596 From: rabenius2001 <jrabenius@c...>
Date: Sun Aug 3, 2003 10:27pm
Subject: WANTED: 4.10 ring and pinions for dana 30 and 35 (TJ)
I am looking for a set of 4.10 ring and pinions for my 1999 TJ.
I have a Dana 30 front with the Dana 35 rear.
reply to jrabenius@c...
Thanks
John Rabenius
88597 From: Wade Ungaro <swaders7@y...>
Date: Sun Aug 3, 2003 10:40pm
Subject: hello?
This is a test message.
Is anyone else not getting AZVJC messages? I see that they are going to the message board, but they aren't coming over to me.
~Wade
'97 "Blue Cactus" TJ
http://members.ebay.com/aboutme/swaders7/
http://www.theungaros.com
http://www.azvjc.org
---------------------------------
Do you Yahoo!?
Yahoo! SiteBuilder - Free, easy-to-use web site design software
[Non-text portions of this message have been removed]
88598 From: Brandon Reid <mikdiamon@c...>
Date: Sun Aug 3, 2003 11:10pm
Subject: I bent the crap out of my alumi-flex tie rod today......
I was doin a little crawlin up Payson way this afternoon, when I
came upon a rock I could'nt resist. The problem was there was some
mud right in front of the rock and when I got to the top I slid to
the outside of the rock and slammed hard onto my tie rod. I herd the
bang, and looked up to see the masks of horror on the faces of my
fellow travellers (in anticipation of the trail repair i'm sure).
Someone said "you've done it now" so I backed up (scraaape) and got
out to survey the damage. The next thing I herd was "Oh, nevermind,
it's ok!". The tie rod had flexed back strait, and except for a few
scratches was good as new.
A huge THANKS to Toys by Troy for making a product that lives up to
the hype. I have a lot of Troy's stuff, and am glad that when it
came down to crunch time, it held up like a champ.
theres a few pics on my webshots page
http://community.webshots.com/album/84177861Mnvogb
Brandon
88599 From: Stu Olson <solson8@q...>
Date: Mon Aug 4, 2003 5:21am
Subject: RE: cargo net
If you like the styles that www.raingler.com sells, then you would want
to get in touch with Jason at www.4x4groupbuy.com (Jason is a local
AZVJC member too)
Stu
Stu Olson
www.stu-offroad.com
-----Original Message-----
From: Steveslifer@a... [mailto:Steveslifer@a...]
Sent: Sunday, August 03, 2003 9:36 PM
To: az_vjc@yahoogroups.com
Subject: [az_vjc] cargo net
Where would be a good place to buy a cargo net for the interior of a
2000 TJ?
[Non-text portions of this message have been removed]
Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
88600 From: Stu Olson <solson8@q...>
Date: Mon Aug 4, 2003 6:14am
Subject: RE: I bent the crap out of my alumi-flex tie rod today......
;>)
Stu Olson
www.stu-offroad.com
-----Original Message-----
From: Brandon Reid [mailto:mikdiamon@c...]
Sent: Sunday, August 03, 2003 11:10 PM
To: az_vjc@yahoogroups.com
Subject: [az_vjc] I bent the crap out of my alumi-flex tie rod
today......
I was doin a little crawlin up Payson way this afternoon, when I
came upon a rock I could'nt resist. The problem was there was some
mud right in front of the rock and when I got to the top I slid to
the outside of the rock and slammed hard onto my tie rod. I herd the
bang, and looked up to see the masks of horror on the faces of my
fellow travellers (in anticipation of the trail repair i'm sure).
Someone said "you've done it now" so I backed up (scraaape) and got
out to survey the damage. The next thing I herd was "Oh, nevermind,
it's ok!". The tie rod had flexed back strait, and except for a few
scratches was good as new.
A huge THANKS to Toys by Troy for making a product that lives up to
the hype. I have a lot of Troy's stuff, and am glad that when it
came down to crunch time, it held up like a champ.
theres a few pics on my webshots page
http://community.webshots.com/album/84177861Mnvogb
Brandon
Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
88576 From: Joe West <arizonajeep@c...>
Date: Sun Aug 3, 2003 8:42am
Subject: RE: Recommendation For Shops
I can. :)
Hopefully, people understand that when someone asks for a
recommendation, it is with the understanding that the answer will
reflect the respondent's experience base and disclaimers about not
having tried all the repair shops in the valley, the state, the nation,
the world, and the universe... are not necessary.
You will not find a 4wd repair shop anywhere in the valley who can touch
the years of 4WD mechanical experience you'll find at 4 Wheeler's
Supply.
Couple their experience with the fact that they stand behind their labor
and parts 100% and throw in the fact that their employees have
exceptional integrity and you'll end up with an experience which can't
be matched anywhere in Arizona.
Forget the disclaimers and the YMMV crap... if you have a problem at 4
Wheeler's Supply, go see the owner Brian and he will resolve the issue.
Great place run by great people... and while I can't endorse businesses
I have not utilized, I can and do endorse 4 Wheeler's Supply.
Hands Down the best.
DISCLAIMERS:
"The reader of this email by the sole act of reading this email agrees
to the terms and conditions contained within this disclaimer and
understands that failure to understand the disclaimer or the inability
to read do not constitute an affirmative defense in litigation
surrounding said disclaimer. The reader should understand that the
respondent to this email has not personally tried every automotive
mechanical repair shop in the entire universe, and the reader of this
email must understand that it is very likely that there are other repair
shops in the universe who do as good a job as does 4 Wheeler's Supply.
The respondent does not work for 4 Wheeler's Supply (hereafter known as
the man). The respondent does not receive kick-backs or other incentives
from the "man", nor does the respondent have any other ties to the "man"
of a personal or financial nature. The opinions offered in this email
are subject to the terms and conditions specified in the 911 page
document titled "Reading and understanding emails from Joe West"
(hereafter known as "common sense") which is held on file for viewing at
the personal residence of Joe West. Document viewing hours are between
the times of 7:01PM and 7:02PM daily, except for the times when the
respondent is not home. The reader of this email agrees to the terms
and conditions of "common sense" and recognizes that failure to apply
"common sense" to emails from the respondent will result in a breach of
this contract and denial of all possible claims under United States law.
Any questions or comments regarding the "man" or "common sense" may be
directed to the respondent at the following email address:
pleasekeepyouropinionstoyourselfanddontnigpickmyem ailsinthemorningcausei
tputsmeinabadmoodwhichwillquitepossiblycausemetowr iteincrediblylongdiatr
ibeswhichinalllikelyhoodyouwillnotwanttoread@would itbotheryouimmenslyifi
toldyouthatireallydontcarewhatyouthink.com
"
END DISCLAIMER
-----Original Message-----
From: Stu Olson [mailto:solson8@q...]
Sent: Sunday, August 03, 2003 7:50 AM
To: az_vjc@yahoogroups.com
Subject: RE: [az_vjc] Recommendation For Shops
4 Wheelers Supply did my axles and did a nice job.
Toys by Troy just did my Advanced Adapters SYE
http://www.stu-offroad.com/preview/preview-00.jpg (among several days
worth of other work) and it came out great.
I couldn't make a personal recommendation that says hands down one is
better than all the rest, since I've only used two shops in the valley.
;>) I can say that both treated me well and I've had no problems with
any of the work they have done.
Stu
Stu Olson
www.stu-offroad.com
-----Original Message-----
From: Joe West [mailto:arizonajeep@c...]
Sent: Sunday, August 03, 2003 7:32 AM
To: 'sdrichm'; az_vjc@yahoogroups.com
Subject: RE: [az_vjc] Recommendation For Shops
Four Wheeler's Supply... hands down the best.
Joe West
-----Original Message-----
From: sdrichm [mailto:sdrichm@c...]
Sent: Saturday, August 02, 2003 9:58 PM
To: az_vjc@yahoogroups.com
Subject: [az_vjc] Recommendation For Shops
I need to find a good trustworthy shop to install a SYE on my 2003
TJ. Not someone that is out to charge me for everything I've got,
but someone that I can trust and start using them from here on out.
Steve
Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
--------------------------------------------------------------------------------
ADVERTISEMENT
88577 From: <azice626@a...>
Date: Sun Aug 3, 2003 5:07am
Subject: Re: Re: H2 in White Tanks area....
sorry Joe... :-) .....actually, since you stripped down, I think I have more
stickers than you....
T.J. Gill
75 CJ5 w/Stuff
90 XJ w/Stuff, Too
See Spot Run......CJ Crawl
[Non-text portions of this message have been removed]
88578 From: Chris Krieg <rv6a@c...>
Date: Sun Aug 3, 2003 9:20am
Subject: Re: Recommendation For Shops
LMAO!!!
Oh yeah, and one more vote for 4 Wheelers Supply from me. Best I've
experienced and they stand behind their work.
Chris
On Sunday, August 3, 2003, at 08:42 AM, Joe West wrote:
> I can. :)
>
> Hopefully, people understand that when someone asks for a
> recommendation, it is with the understanding that the answer will
> reflect the respondent's experience base and disclaimers about not
> having tried all the repair shops in the valley, the state, the nation,
> the world, and the universe... are not necessary.
>
> You will not find a 4wd repair shop anywhere in the valley who can
> touch
> the years of 4WD mechanical experience you'll find at 4 Wheeler's
> Supply.
> Couple their experience with the fact that they stand behind their
> labor
> and parts 100% and throw in the fact that their employees have
> exceptional integrity and you'll end up with an experience which can't
> be matched anywhere in Arizona.
>
> Forget the disclaimers and the YMMV crap... if you have a problem at 4
> Wheeler's Supply, go see the owner Brian and he will resolve the issue.
>
> Great place run by great people... and while I can't endorse businesses
> I have not utilized, I can and do endorse 4 Wheeler's Supply.
>
> Hands Down the best.
>
> DISCLAIMERS:
>
> "The reader of this email by the sole act of reading this email agrees
> to the terms and conditions contained within this disclaimer and
> understands that failure to understand the disclaimer or the inability
> to read do not constitute an affirmative defense in litigation
> surrounding said disclaimer. The reader should understand that the
> respondent to this email has not personally tried every automotive
> mechanical repair shop in the entire universe, and the reader of this
> email must understand that it is very likely that there are other
> repair
> shops in the universe who do as good a job as does 4 Wheeler's Supply.
> The respondent does not work for 4 Wheeler's Supply (hereafter known as
> the man). The respondent does not receive kick-backs or other
> incentives
> from the "man", nor does the respondent have any other ties to the
> "man"
> of a personal or financial nature. The opinions offered in this email
> are subject to the terms and conditions specified in the 911 page
> document titled "Reading and understanding emails from Joe West"
> (hereafter known as "common sense") which is held on file for viewing
> at
> the personal residence of Joe West. Document viewing hours are between
> the times of 7:01PM and 7:02PM daily, except for the times when the
> respondent is not home. The reader of this email agrees to the terms
> and conditions of "common sense" and recognizes that failure to apply
> "common sense" to emails from the respondent will result in a breach of
> this contract and denial of all possible claims under United States
> law.
> Any questions or comments regarding the "man" or "common sense" may be
> directed to the respondent at the following email address:
>
> pleasekeepyouropinionstoyourselfanddontnigpickmyem ailsinthemorningcause
> i
> tputsmeinabadmoodwhichwillquitepossiblycausemetowr iteincrediblylongdiat
> r
> ibeswhichinalllikelyhoodyouwillnotwanttoread@would itbotheryouimmenslyif
> i
> toldyouthatireallydontcarewhatyouthink.com
>
> "
>
> END DISCLAIMER
>
> -----Original Message-----
> From: Stu Olson [mailto:solson8@q...]
> Sent: Sunday, August 03, 2003 7:50 AM
> To: az_vjc@yahoogroups.com
> Subject: RE: [az_vjc] Recommendation For Shops
>
> 4 Wheelers Supply did my axles and did a nice job.
>
> Toys by Troy just did my Advanced Adapters SYE
> http://www.stu-offroad.com/preview/preview-00.jpg (among several days
> worth of other work) and it came out great.
>
> I couldn't make a personal recommendation that says hands down one is
> better than all the rest, since I've only used two shops in the valley.
> ;>) I can say that both treated me well and I've had no problems with
> any of the work they have done.
>
> Stu
>
>
> Stu Olson
> www.stu-offroad.com
>
>
> -----Original Message-----
> From: Joe West [mailto:arizonajeep@c...]
> Sent: Sunday, August 03, 2003 7:32 AM
> To: 'sdrichm'; az_vjc@yahoogroups.com
> Subject: RE: [az_vjc] Recommendation For Shops
>
> Four Wheeler's Supply... hands down the best.
>
> Joe West
>
> -----Original Message-----
> From: sdrichm [mailto:sdrichm@c...]
> Sent: Saturday, August 02, 2003 9:58 PM
> To: az_vjc@yahoogroups.com
> Subject: [az_vjc] Recommendation For Shops
>
> I need to find a good trustworthy shop to install a SYE on my 2003
> TJ. Not someone that is out to charge me for everything I've got,
> but someone that I can trust and start using them from here on out.
>
> Steve
>
>
>
>
> Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
>
>
>
>
>
>
> Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
>
>
>
>
>
>
> Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
>
>
>
>
>
>
> Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
>
>
88579 From: <SteelPonyCowboy@a...>
Date: Sun Aug 3, 2003 5:35am
Subject: HELP ! Horrible "grinding" noise in ZJ
I have a terrible grinding (dont know how to describe it any better) noise
in the front of my 98 ZJ somewhere with just a hint of vibration.....only
happens when moving and gets louder as you go faster. Its not the brakes, any
ideas ??????
88580 From: parbetter1 <parbetter1@c...>
Date: Sun Aug 3, 2003 9:51am
Subject: For Sale - 97 Rockcrawler TJ $7000
I have just ordered a new truck and am now selling the toy. Its a
97 TJ sport, with 79,000 miles. It has a 4 inch Teraflex lift, Arbs
front and back, 4.56 ring gears,beard seats, full rollcage, 35 x
14.50 radial super swampers, on board air, just to name a few
modifications. All work was done by 4-wheelers supply and Shannon
Campbell Ent. All body panels are straight with no dents. Have
receipts for all mods and work. Call William at 602-502-2332.
88581 From: Joe West <arizonajeep@c...>
Date: Sun Aug 3, 2003 10:08am
Subject: RE: HELP ! Horrible "grinding" noise in ZJ
My guesses:
1. Front Axle Bearing assembly
2. Front Axle Gears.
3. Front Axle Lubricant.
Joe West
-----Original Message-----
From: SteelPonyCowboy@a... [mailto:SteelPonyCowboy@a...]
Sent: Sunday, August 03, 2003 9:36 AM
To: az_vjc@yahoogroups.com
Subject: [az_vjc] HELP ! Horrible "grinding" noise in ZJ
I have a terrible grinding (dont know how to describe it any better)
noise
in the front of my 98 ZJ somewhere with just a hint of
vibration.....only
happens when moving and gets louder as you go faster. Its not the
brakes, any
ideas ??????
Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
88582 From: <hunteroffroad@a...>
Date: Sun Aug 3, 2003 6:29am
Subject: Re: Recommendation For Shops
THAT was by FAR that funniest thing I have ever READ ..... That was
classic.... You should go into disclaimer biz..
John k
[Non-text portions of this message have been removed]
88583 From: blackxj2000 <mark_cur@c...>
Date: Sun Aug 3, 2003 11:00am
Subject: Motor lopes and surges
99xj 4.0 Motor lopes at idle and surges at speed.Hope someone can
help.
88584 From: Stu Olson <solson8@q...>
Date: Sun Aug 3, 2003 11:19am
Subject: RE: For Sale - 97 Rockcrawler TJ $7000
Oh boy, now you went and did it....you shouldn't have mentioned that
Shannon Campbell Ent. worked on your TJ. (They are not on JoeW's list
of "hands down" approved 4x4 shops!) LOL
But on a more serious note, your '97 sounds pretty nice and I'm sure it
will make a nice rig for who ever decides to buy it....and good luck
with your new truck.
Stu
Stu Olson
www.stu-offroad.com
-----Original Message-----
From: parbetter1 [mailto:parbetter1@c...]
Sent: Sunday, August 03, 2003 9:51 AM
To: az_vjc@yahoogroups.com
Subject: [az_vjc] For Sale - 97 Rockcrawler TJ $7000
I have just ordered a new truck and am now selling the toy. Its a
97 TJ sport, with 79,000 miles. It has a 4 inch Teraflex lift, Arbs
front and back, 4.56 ring gears,beard seats, full rollcage, 35 x
14.50 radial super swampers, on board air, just to name a few
modifications. All work was done by 4-wheelers supply and Shannon
Campbell Ent. All body panels are straight with no dents. Have
receipts for all mods and work. Call William at 602-502-2332.
Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
88585 From: intertwingled <intertwingled@q...>
Date: Sat Aug 2, 2003 1:43pm
Subject: Re: Motor lopes and surges
Well... I blame everything on the engine computer, myself. =P
Looks like mine (on my 94 YJ) is getting read to burn itself out
again (the computer engines on 94 YJ's are located in the engine
compartment and my theory is the computer chips cook themselves
to death in the engine heat + high heat of Arizona summers. )
Looks like my project to get the engine computer moved into
the driver's compartment didn't happen soon enough =(
Tony
blackxj2000 wrote:
>99xj 4.0 Motor lopes at idle and surges at speed.Hope someone can
>help.
>
>
>
>
>Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
>
>
>
88586 From: intertwingled <intertwingled@q...>
Date: Sat Aug 2, 2003 1:45pm
Subject: Re: Re: one more reason to hate Chrysler
Well, all in all, no great loss, because I am planning on replacing the
entire
air box with a home grown snorkel made out of Ace Hardware PVC tubing
and joints. =) So eventally the horn would have been outta there anyway.
Tony
chaton602phx@a... wrote:
>But all in all, it doesn't work!
>
>Anthony
>
>
>[Non-text portions of this message have been removed]
>
>
>
>
>Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
>
>
>
88587 From: AzVJC Website <azvjc@a...>
Date: Sun Aug 3, 2003 2:51pm
Subject: [FS] Vendor Items Added
<p>
<font face=Arial>
Hello Members of the AzVJC,<br>
Kirk Sanich has just added some items to the Classified section of the AzVJC Website that may be of
interest to you. To see these items
<a href='http://www.azvjc.org/default.asp?A=X&ID=ForSale/default.asp?C=10'>
Click Here
</a>
or goto the website classifieds and select 'Vendor' from the list.<br>
Thank You,<br><br>
- The AzVJC Website<br><br>
</font>
</p>
88588 From: <chaton602phx@a...>
Date: Sun Aug 3, 2003 0:38pm
Subject: Re: Re: one more reason to hate Chrysler
now thats what I'm wanting to do. you have insturctions for that?
[Non-text portions of this message have been removed]
88589 From: xxnickthedickxx <squarelights@h...>
Date: Sun Aug 3, 2003 8:28pm
Subject: ( TJ ) Who Had Rear Swing Tire Carrier For Sale?
I have a friend who might want to get a swing out tire carrier for
his tj so if you have one for sale shoot me an email.
thanks,
nick
88590 From: Brandon Reid <mikdiamon@c...>
Date: Sun Aug 3, 2003 8:46pm
Subject: Who bought my Toys by Troy front bumper? (Brandon Reid)
please email me
Thanks
Brandon
88591 From: oveson2 <oveson.l@j...>
Date: Sun Aug 3, 2003 9:21pm
Subject: Rick Beer
Which Discount Tire Store does Rick Beer work at? Need to talk to him.
88592 From: Brandon Reid <mikdiamon@c...>
Date: Sun Aug 3, 2003 9:30pm
Subject: Re: Rick Beer
Discount Tire
(602)942-9603
407 W. Bell Road
Phoenix, AZ
--- In az_vjc@yahoogroups.com, "oveson2" <oveson.l@j...> wrote:
> Which Discount Tire Store does Rick Beer work at? Need to talk to
him.
88593 From: <Steveslifer@a...>
Date: Sun Aug 3, 2003 5:35pm
Subject: cargo net
Where would be a good place to buy a cargo net for the interior of a 2000 TJ?
[Non-text portions of this message have been removed]
88594 From: AzVJC Website <azvjc@a...>
Date: Sun Aug 3, 2003 10:03pm
Subject: [TR] Rubicon - Saturday, August 9, 2003 - Reminder
Hello All,John Halverson is leading a Rubicon trail run on Saturday, August 9, 2003.<br><br>When: 08-09-2003
Where: Meet at Loves Truck Stop, 6am Sat. 08-09-03 Rollout at 6:30 am
Rating: 4.0+
Length: 6 days
CB Channel: 4
THE RUBICON TRIP IS ALIVE..<br>
<br>
Leaving Phoenix, Sat. Aug. 09. <br>
Travel to Loon Lake, first nights camp. Start the trail Mon. Aug. 11<br>
Second night camp at Spider Lake, Third at Rubicon Springs.<br>
Thursday and Friday, travel home.<br>
<br>
We may be able to cut a day out of this if we get off the trail early enough Wed. to get a start home. It kind of depends on breakage and how well we are doing on the trail.<br>
<br>
Meet at Loves Truck stop Sat Aug. 09 at 6 am, roll out at 6:30 am<br>
<br>
John 602-568-5711
<a href=" http://www.rubicon-trail.com/Rubicon/index.html" target="_blank">Click here for more info.</a>
http://www.azvjc.org/default.asp?A=1&ID=723
Click the link above To Add Your Name to the Sign Up List
Thank You,
- The AzVJC Website
88595 From: BradP Kilgore <brad.kilgore@p...>
Date: Sun Aug 3, 2003 10:25pm
Subject: RE: cargo net
www.4x4groupbuy.com
Jason is local so you can save shipping if you want.
Brad
-----Original Message-----
From: Steveslifer@a... [mailto:Steveslifer@a...]
Sent: Sun 8/3/2003 9:35 PM
To: az_vjc@yahoogroups.com
Cc:
Subject: [az_vjc] cargo net
Where would be a good place to buy a cargo net for the interior of a 2000 TJ?
[Non-text portions of this message have been removed]
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
88596 From: rabenius2001 <jrabenius@c...>
Date: Sun Aug 3, 2003 10:27pm
Subject: WANTED: 4.10 ring and pinions for dana 30 and 35 (TJ)
I am looking for a set of 4.10 ring and pinions for my 1999 TJ.
I have a Dana 30 front with the Dana 35 rear.
reply to jrabenius@c...
Thanks
John Rabenius
88597 From: Wade Ungaro <swaders7@y...>
Date: Sun Aug 3, 2003 10:40pm
Subject: hello?
This is a test message.
Is anyone else not getting AZVJC messages? I see that they are going to the message board, but they aren't coming over to me.
~Wade
'97 "Blue Cactus" TJ
http://members.ebay.com/aboutme/swaders7/
http://www.theungaros.com
http://www.azvjc.org
---------------------------------
Do you Yahoo!?
Yahoo! SiteBuilder - Free, easy-to-use web site design software
[Non-text portions of this message have been removed]
88598 From: Brandon Reid <mikdiamon@c...>
Date: Sun Aug 3, 2003 11:10pm
Subject: I bent the crap out of my alumi-flex tie rod today......
I was doin a little crawlin up Payson way this afternoon, when I
came upon a rock I could'nt resist. The problem was there was some
mud right in front of the rock and when I got to the top I slid to
the outside of the rock and slammed hard onto my tie rod. I herd the
bang, and looked up to see the masks of horror on the faces of my
fellow travellers (in anticipation of the trail repair i'm sure).
Someone said "you've done it now" so I backed up (scraaape) and got
out to survey the damage. The next thing I herd was "Oh, nevermind,
it's ok!". The tie rod had flexed back strait, and except for a few
scratches was good as new.
A huge THANKS to Toys by Troy for making a product that lives up to
the hype. I have a lot of Troy's stuff, and am glad that when it
came down to crunch time, it held up like a champ.
theres a few pics on my webshots page
http://community.webshots.com/album/84177861Mnvogb
Brandon
88599 From: Stu Olson <solson8@q...>
Date: Mon Aug 4, 2003 5:21am
Subject: RE: cargo net
If you like the styles that www.raingler.com sells, then you would want
to get in touch with Jason at www.4x4groupbuy.com (Jason is a local
AZVJC member too)
Stu
Stu Olson
www.stu-offroad.com
-----Original Message-----
From: Steveslifer@a... [mailto:Steveslifer@a...]
Sent: Sunday, August 03, 2003 9:36 PM
To: az_vjc@yahoogroups.com
Subject: [az_vjc] cargo net
Where would be a good place to buy a cargo net for the interior of a
2000 TJ?
[Non-text portions of this message have been removed]
Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
88600 From: Stu Olson <solson8@q...>
Date: Mon Aug 4, 2003 6:14am
Subject: RE: I bent the crap out of my alumi-flex tie rod today......
;>)
Stu Olson
www.stu-offroad.com
-----Original Message-----
From: Brandon Reid [mailto:mikdiamon@c...]
Sent: Sunday, August 03, 2003 11:10 PM
To: az_vjc@yahoogroups.com
Subject: [az_vjc] I bent the crap out of my alumi-flex tie rod
today......
I was doin a little crawlin up Payson way this afternoon, when I
came upon a rock I could'nt resist. The problem was there was some
mud right in front of the rock and when I got to the top I slid to
the outside of the rock and slammed hard onto my tie rod. I herd the
bang, and looked up to see the masks of horror on the faces of my
fellow travellers (in anticipation of the trail repair i'm sure).
Someone said "you've done it now" so I backed up (scraaape) and got
out to survey the damage. The next thing I herd was "Oh, nevermind,
it's ok!". The tie rod had flexed back strait, and except for a few
scratches was good as new.
A huge THANKS to Toys by Troy for making a product that lives up to
the hype. I have a lot of Troy's stuff, and am glad that when it
came down to crunch time, it held up like a champ.
theres a few pics on my webshots page
http://community.webshots.com/album/84177861Mnvogb
Brandon
Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/