blooddrive
01-08-2004, 09:00 PM
88150-88174
88150 From: <hunteroffroad@a...>
Date: Thu Jul 24, 2003 7:57pm
Subject: (FS) Dodge Dropin Bedliner
I have a plastic beliner that will 94-02 dodge short bed. It is factory bed
liner.
I have no idea if it wil fit any other short bed.
It is in decent shape
50.00 ?? 40.00 ?? 30.00 ?? make an offer
Like to give it a good home :)
John K
480-557-7577
[Non-text portions of this message have been removed]
--------------------------------------------------------------------------------
ADVERTISEMENT
88151 From: Kevin Gallagher <GIThunder81@c...>
Date: Fri Jul 25, 2003 1:07am
Subject: RE: Need Paint Work
I am heading to petes tomorrow with all your requests and he wil have
the estimates for me a day or 2 after. Thanx for all the support as I am
sure when I walk in there and say hey I have a bout 5 projects lined up
for you what can you do for me should turn out well. I will post the
estimates when I receive them.
-----Original Message-----
From: G. Rob Williams [mailto:g_rob_williams@y...]
Sent: Thursday, July 24, 2003 8:36 PM
To: Kevin Gallagher
Subject: RE: [az_vjc] Need Paint Work
I have about 5 major spots to paint on my Suburban. It
is already black so it wont be hard to colormatch it.
If it is cheaper I'll even dust one coat on the entire
vehicle. I am trying to trade it in on a new tow rig,
but I am not getting close to what it is worth because
the paint on it. I dont know if he can give me quote
wise on it, but I basically need the hood, passenger
front door and rear panel behind the passenger rear
tire touched up, or if it is cheaper, one coat on the
entire truck. -Rob
--- Kevin Gallagher <githunder81@c...> wrote:
> I know a guy out here in buckeye, he does excellent
> work and very cheap.
> I had him do some work for me and he charged 300
> less than others
> wanted. If you want his name let me know. He needs
> some favors from me
> so I might be abloe to get a discount if other
> members of the AZVJC are
> interested as well, let me know what you want done
> and I can get ya and
> apprx price
>
> -----Original Message-----
> From: Rob Williams [mailto:g_rob_williams@y...]
>
> Sent: Wednesday, July 23, 2003 3:25 PM
> To: az_vjc@yahoogroups.com
> Subject: [az_vjc] Need Paint Work
>
> I need someone to touch up/fix some paint issues. Is
> there anyone in
> the club that can do this, or know where to go to
> have it done. I am
> pretty much just looking for a decent job at a good
> price. E-mail me
> off list if you can help me out. -Rob
>
>
>
>
> Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
>
>
>
>
__________________________________
Do you Yahoo!?
Yahoo! SiteBuilder - Free, easy-to-use web site design software
http://sitebuilder.yahoo.com
88152 From: Casper <casper@c...>
Date: Fri Jul 25, 2003 0:56am
Subject: Billet Spacers?
Can anyone help me out with this issue. I have seen other XJ's running billet spacers to allow for the use of certain wheels and such. I am looking to gain in the area of 4.5 backspacing. I have found some at Performance Wheel and Spidertrax. They are asking around 50.00 to 60.00 each. Made from T6061 alloy Aluminum. Is this a good idea, and where in the valley can I find them. How much? Any help with this would be greatly appreciated.
Thanks,
Casper
[Non-text portions of this message have been removed]
88153 From: nathanielaz <nathanielaz@y...>
Date: Fri Jul 25, 2003 4:30am
Subject: Re: Billet Spacers?
Over at aim industries/ truckn. www.truckn.com
They are in mesa off hibbert and broadway. Can make any size wheel
combo and better prices than anyone.
--- In az_vjc@yahoogroups.com, "Casper" <casper@c...> wrote:
> Can anyone help me out with this issue. I have seen other XJ's
running billet spacers to allow for the use of certain wheels and
such. I am looking to gain in the area of 4.5 backspacing. I have
found some at Performance Wheel and Spidertrax. They are asking
around 50.00 to 60.00 each. Made from T6061 alloy Aluminum. Is this
a good idea, and where in the valley can I find them. How much? Any
help with this would be greatly appreciated.
>
> Thanks,
> Casper
>
>
> [Non-text portions of this message have been removed]
88154 From: tom lafrance <tlafrance@j...>
Date: Fri Jul 25, 2003 5:02am
Subject: [OT] Last CCW class for a LONG time
I have a few seats left in THIS weekends CCW class.
I have chosen to not renew my liability insurance or teach anymore
classes due to declining attendance and increased time demands from my
family life. If you want a permit from me, this is your last
opportunity. Please call 480-985-0005 and reserve your seat.
Tom LaFrance
-------------------------------------------------------------------------
-------------------------------
Did you ever notice that the people who are late are much happier than
the ones who turn up on time?
88155 From: james kilcullen <whoozey1953@y...>
Date: Fri Jul 25, 2003 5:36am
Subject: Re: Re: Where can I find a CJ7 tailgate??
I assume you want to convert your swing away tailgate to a drop down? Why not convert your existing one? I have seen it done on a YJ.
Matt OBrien <makaioo@y...> wrote:Used CJ tailgates are typically hard to find, especially one that's
not abused. If you can't find a used tailgate, you can get one new
from http://www.4wd.com
Steel Tailgate, CJ7, CJ8, 1976-86
Product Number: 5454025
$94.95
Good luck,
Matt
K7MTO
--- In az_vjc@yahoogroups.com, "yzguyone25" wrote:
> I am looking for a CJ7 tailgate and hinges! Does anyone have one
> laying around they would like to sell or maybe seen one laying
around
> in a junkyard? I would like one in decent shape. Paint wise is
no
> biggie, just prefer not to have any dents or holes.
>
> If there is any interest I am willing to trade my TJ tailgate and
> hinges.
>
> Any heads up anywhere?
>
> Thanks a ton!
> Justin Olson
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
---------------------------------
Do you Yahoo!?
Yahoo! SiteBuilder - Free, easy-to-use web site design software
[Non-text portions of this message have been removed]
88156 From: james kilcullen <whoozey1953@y...>
Date: Fri Jul 25, 2003 5:46am
Subject: Re: Re: Billet Spacers?
I wouldn't give Joe Morrow (the owner of AIM) the time of day. His shop is like a prison camp with cameras everywhere, and you have to go thru a metal detector to leave the place. He treats his employees like crap, and he screwed me out of $800.00 when I quit there because of horribly unsafe working conditions. The "engineers" he has working there are nothing but a bunch of minimum wage kids cobbling up crap. If you REALLY want to know what I think, I'll let you know, and I won't sugar-coat it like I am here.
nathanielaz <nathanielaz@y...> wrote:Over at aim industries/ truckn. www.truckn.com
They are in mesa off hibbert and broadway. Can make any size wheel
combo and better prices than anyone.
--- In az_vjc@yahoogroups.com, "Casper" wrote:
> Can anyone help me out with this issue. I have seen other XJ's
running billet spacers to allow for the use of certain wheels and
such. I am looking to gain in the area of 4.5 backspacing. I have
found some at Performance Wheel and Spidertrax. They are asking
around 50.00 to 60.00 each. Made from T6061 alloy Aluminum. Is this
a good idea, and where in the valley can I find them. How much? Any
help with this would be greatly appreciated.
>
> Thanks,
> Casper
>
>
> [Non-text portions of this message have been removed]
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
---------------------------------
Do you Yahoo!?
Yahoo! SiteBuilder - Free, easy-to-use web site design software
[Non-text portions of this message have been removed]
88157 From: AzVJC Website <azvjc@a...>
Date: Fri Jul 25, 2003 6:31am
Subject: [TR] Unspecified - Saturday, July 26, 2003
Hello All,Paul Tenniswood is leading an Unspecified trail run on Saturday, July 26, 2003.<br><br>When: Meet between 7:00am and 7:15am at the Cottenwood Canyon Ranch rd off hwy 79 north of Florance...
Where: florance
Rating: None
Length: depends
CB Channel: 5
Bad Medicine... the trail is a fairly short wash that has many challanging obsticles ,most have bypasses... some do not... If it isn't enought to do just that trail we can add upper ajax or some other trail to the end...
http://www.azvjc.org/default.asp?A=1&ID=965
Click the link above To Add Your Name to the Sign Up List
Thank You,
- The AzVJC Website
88158 From: AzVJC Website <azvjc@a...>
Date: Fri Jul 25, 2003 6:33am
Subject: [TR] Unspecified - Saturday, July 26, 2003 - Reminder
Hello All,Paul Tenniswood is leading an Unspecified trail run on Saturday, July 26, 2003.<br><br>When: Meet between 7:00am and 7:15am
Where: Cottenwood Canyon Ranch rd off 79 north of Florance
Rating: None
Length: depends
CB Channel: 5
Bad Medicine... the trail is a fairly short wash that has many challanging obsticles ,most have bypasses... some do not... If it isn't enought to do just that trail we can add upper ajax or some other trail to the end...
http://www.azvjc.org/default.asp?A=1&ID=965
Click the link above To Add Your Name to the Sign Up List
Thank You,
- The AzVJC Website
88159 From: AzVJC Website <azvjc@a...>
Date: Fri Jul 25, 2003 6:34am
Subject: [TR] Unspecified - Saturday, July 26, 2003 - Reminder
Hello All,Paul Tenniswood is leading an Unspecified trail run on Saturday, July 26, 2003.<br><br>When: Meet between 7:00am and 7:15am
Where: Cottenwood Canyon Ranch rd off 79 north of Florance
Rating: None
Length: depends
CB Channel: 5
Bad Medicine... the trail is a fairly short wash that has many challanging obsticles ,most have bypasses... some do not... If it isn't enought to do just that trail we can add upper ajax or some other trail to the end...
http://www.azvjc.org/default.asp?A=1&ID=965
Click the link above To Add Your Name to the Sign Up List
Thank You,
- The AzVJC Website
88160 From: Joe West <arizonajeep@c...>
Date: Fri Jul 25, 2003 6:35am
Subject: RE: Ream Control Arm Weld...I think
Jake,
If you end up having to pay for the weld to be repaired; I'd recommend
Hunter Offroad... extremely good prices and work that is second to none.
Joe West
-----Original Message-----
From: Jayke Thorpe [mailto:jeepboy_3@y...]
Sent: Thursday, July 24, 2003 5:18 PM
To: AZVJC
Subject: [az_vjc] Ream Control Arm Weld...I think
So, today, turning the corner I noticed a clunk from my rear-end. Well
my rear control arm on the drivers side has broken the weld. Is there
anyone who can weld this? I can supply frosty bev and food and help on
your rig or what ever, though I am not that mechanically inclined. Any
help would be great.
Thank You,
--S. Jayke Thorpe
S. Jayke Thorpe
---------------------------------
Do you Yahoo!?
Yahoo! SiteBuilder - Free, easy-to-use web site design software
[Non-text portions of this message have been removed]
Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
88161 From: Joe West <arizonajeep@c...>
Date: Fri Jul 25, 2003 6:38am
Subject: RE: Learn to do it yourself.. if you don't know how; I'd be happy to show you. Was RE: Dealership maintenance
Hey Phil... I'd be happy to teach you how to read wiring diagrams. I'm
out on travel for the next three weeks, but when I get back, let's get
together for a couple of hours.
Joe
-----Original Message-----
From: Phil Thompson [mailto:ablockalypse@y...]
Sent: Thursday, July 24, 2003 3:41 PM
To: az_vjc@yahoogroups.com
Subject: Re: Learn to do it yourself.. if you don't know how; I'd be
happy to show you. Was RE: [az_vjc] Dealership maintenance
Hey Jim,
Working on Jeeps gets in your blood. Lots of folks on here have lent
me a hand in the past and I got the chance to pay it back this last
weekend. Had a new member over and put his lift on in a couple of
hours. This whole club is that way. They get their rigs built the way
they want them so the only thing left is to work on someone else's
LOL. Most folks are more than helpful, all you gotta do is ask, the
wealth of knowledge is overwhelming, and they're always willing to
help. Service manual will go a long way, now if Someone would teach
me to read wiring diagrams...
Phil
--- In az_vjc@yahoogroups.com, "JimSerio" <jim@r...> wrote:
> Joe,
>
> I couldn't agree with you more, and I would *love* to do it myself.
> I used to perform most of the maintenence on my last truck.
> Unfortunately, where I currently live, I am unable to do any work
on
> my Jeep. If anyone is interesting in loaning me their driveway or
> work space, I'd love to do (and learn) the work myself. I also
would
> like to perform a 2-3" lift but don't have the tools for this.
>
> Maybe a monthly gathering at someone's house/shop where we can all
> do maintenence?
>
> Jim
>
>
>
>
> --- In az_vjc@yahoogroups.com, "Joe West" <joe.west@s...> wrote:
> > Jim,
> >
> > The absolute BEST thing you could do is learn to do it yourself.
> It is
> > EXTREMELY easy... Purchase a factory service manual and if you
> don't know
> > how to do it yourself... I'd be glad to teach you.
> > In fact, I'd be glad to teach anyone who is interested. If there
> is enough
> > interest; I'll put together a workshop.
> >
> > The truth is, one of the nicest aspects of Jeep ownership is
> learning to do
> > it yourself.
> >
> > Kind Regards,
> >
> > Joe West
> >
> > -----Original Message-----
> > From: JimSerio [mailto:jim@r...]
> > Sent: Thursday, July 24, 2003 10:30 AM
> > To: az_vjc@yahoogroups.com
> > Subject: [az_vjc] Dealership maintnence
> >
> >
> > Has anyone taken their Jeeps to any of the local dealers for the
> 30K
> > tune-up? What's the cost run on this and what does it include? I'm
> > leaning toward Darner since they get such good marks from this
> > group, but if anyone else has recommendations, I'd appreciate it.
> >
> > BTW... I'm considering a dealer as opposed to a mom/pop shop as
> I've
> > read that some warranty work may require proof of regular
> > maintenence. Who better to have those records than a dealer.
> >
> > Jim
> >
> >
> >
> >
> > Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
88162 From: AzVJC Website <azvjc@a...>
Date: Fri Jul 25, 2003 6:43am
Subject: [TR] Technical Workshop - Sunday, November 2, 2003 - Reminder
Hello All,Joe West is leading a Technical Workshop trail run on Sunday, November 2, 2003.<br><br>When: 8am
Where: My home located at 649 South 30th Circle, Mesa Arizona 85204. Yahoo maps will provide a great map which will bring you directly to my home.
Rating: 2.0-
Length: Finished by Noon
CB Channel:
This is the fourth Kill Switch workshop.
We will be installing stand-alone kill switches on all vehicles.<br>
<br>
The cost for the workshop will be $20 per person and will include everything you need to install a kill switch.<br>
<br>
The workshop can hold approximately 30 vehicles.<br>
<br>
More details will follow as the time for the workshop gets closer.<br>
<br>
I will continue to schedule kill switch technical workshops every few months until everyone who wants to have an anti-theft kill switch installed has one. I will then schedule them once a year or so. I still have people contacting me who want to install a kill switch so I have scheduled this fourth workshop for Sunday, November 2nd at 9:00am.
This is kill switch technical workshop number 4. The purpose of this workshop is threefold:
1. To keep your rig from being a theft statistic.
2. To show you how easy it is to install a kill switch.
3. To spend some fun time just hanging out with Jeepers.
I have picked a date for the fourth kill-switch workshop a few months out to enable people to sign up over a longer period of time. I will update the information in this run as necessary, but for the most part all of the information you will need is here. The limit for the number of rigs we can fit in my yard and cul-de-sac is 30 so this will be the maximum number of people who can sign up. Please note that YOU will be doing the work in this workshop and I will be guiding, assisting, teaching, and testing your installs (and fixing any problems which may occur).
The price for the kill switch alone is $20, and includes everything you will need to install the switch.
Please note: I am NOT making any money on the kill switches and hood locks... the charge just covers the cost of the hardware with a couple of dollars extra thrown in to cover supplies. I do this workshop for fun and to help people out... not to make money.
Unfortunately, because of problems I had with purchasing hoodlock/killswitches for people who didn't show and didn't pay (leaving me stuck with the hardware), it will be necessary for people to pay in advance. To pay for your kill switch, sign up for this run and then send a check for the appropriate amount to my home address shown below. In the memo area on your check, please put kill switch. No matter how early you send out your payment, I will not cash the check until I actually purchase the kill switch.
The kill switch type will be determined by the year, make, and model of the Jeep being fitted with the switch. For those members with Wranglers/CJs and other SWB Jeeps with no hood locks, I will encourage a group buy of a hood lock kill switch combination. Once I determine how many people sign up and what kind of vehicles they have, I will put together a list of required materials and purchase them for everyone. Individual members can choose what kind of kill switch they want or I will determine it for them based on vehicle type if they have no preference. I will provide all tools and will purchase bulk materials (wires, switches, solder, connectors, electrical tape, zip ties, etc) which everyone will split the cost of. If you are interested, please sign up.
VERY IMPORTANT:
All Participants in the clinic MUST give me the following information:
1. Year and model of vehicle on which we will be installing the kill switch
2. Do you have a FACTORY service manual OR a service manual with wiring schematics for your vehicle?
3. Which of the following tools can you bring: drill, drill bits, wire cutters, metric and/or standard socket set, wire strippers, wire crimpers, nylon ties, electrical tape, soldering iron/solder, long extension cords, multi-outlet adaptors/short extension cords, volt-ohm meters or DVM, blowdryer (for heat-shrink tubing).
VERY VERY IMPORTANT:
My home address is:
649 S. 30th Circle, Mesa, Arizona 85204.
<br>
My home phone is:
(480) 325-9419
My cell phone is:
(602) 616-0785
You can obtain very good directions from Yahoo maps... but a brief set of directions are as follows:
Take 60 headed East and get off on Gilbert Road.
Head North on Gilbert Road (Left) to Broadway Road.
Head East on Broadway (right) to 30th street (30th street is the FIRST residential street you can make a right on just past the light at Lindsay... do not turn into the small community just east of Walgreens.
Head South (right) on 30th Street.
30th Street dead ends in my Cul-De-Sac and my home is the one with all the palm trees in the yard.
PLEASE PLEASE park along 30th street and WALK to my home. The reason that I am asking this is because I want to group like vehicles together to simplify installations. After everyone parks along 30th street, I will have a short meeting on my front porch and then I will ask all YJ owners to go get their vehicles and we will place them in one location in my yard. I will then ask all TJ owners to go get their vehicles and will park them in another location... and so on until all vehicle types are grouped together in my yard or cul-de-sac.
After everyone is grouped together, I will walk everyone through the steps of installing kill switches... and we will work together as a team to get them installed. To avoid having any electrical problems, you will be required to disconnect the positive lead on your battery BEFORE we do any work on your vehicle.
Please plan on bringing a cooler with drinks, cups and/or snacks if you will need them.
I will post this entire post to the "trip" on Azvjc.org if people need to reference it at a later date.
If you have suggestions and you see something I have forgotten, please let me know.
And last but not least, if you would like to come hang out and HELP or just watch and learn... I'm sure we could use all the help we can get. Everyone interested is welcome to show up.
If you have any questions, please contact me via email at:
arizonajeep@c...
Kind Regards,
Joe West
Technical workshops happen every once in a while and are intended as a "How To" class.
http://www.azvjc.org/default.asp?A=1&ID=904
Click the link above To Add Your Name to the Sign Up List
Thank You,
- The AzVJC Website
88163 From: jetowle2000 <James.Towle@a...>
Date: Fri Jul 25, 2003 7:29am
Subject: Re: Ream Control Arm Weld...I think
(where was this orignal message?)
Frosty beverage......... LOL
Jake, where are you at? I am in Chandler. How soon do you need this
done? (loaded question) I have to go pick up my welding unit, I let
a friend borrow it (but, with my junk on it's way home I need my
welder anyway).
Let me know. HTH
--James
--- In az_vjc@yahoogroups.com, "Joe West" <arizonajeep@c...> wrote:
> Jake,
>
> If you end up having to pay for the weld to be repaired; I'd
recommend
> Hunter Offroad... extremely good prices and work that is second to
none.
>
> Joe West
>
> -----Original Message-----
> From: Jayke Thorpe [mailto:jeepboy_3@y...]
> Sent: Thursday, July 24, 2003 5:18 PM
> To: AZVJC
> Subject: [az_vjc] Ream Control Arm Weld...I think
>
> So, today, turning the corner I noticed a clunk from my rear-end.
Well
> my rear control arm on the drivers side has broken the weld. Is
there
> anyone who can weld this? I can supply frosty bev and food and
help on
> your rig or what ever, though I am not that mechanically
inclined. Any
> help would be great.
> Thank You,
> --S. Jayke Thorpe
>
>
> S. Jayke Thorpe
>
> ---------------------------------
> Do you Yahoo!?
> Yahoo! SiteBuilder - Free, easy-to-use web site design software
>
> [Non-text portions of this message have been removed]
>
>
>
>
> Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
88164 From: Linda <minihummer@w...>
Date: Fri Jul 25, 2003 7:34am
Subject: Re: Billet Spacers?
FWIW, I ran 16x8 wheels w/4.5" backspacing on my ZJ without spacers.
It limits the width of the tire you can run, but I have fondness for
narrow tires.
Linda
--- In az_vjc@yahoogroups.com, james kilcullen <whoozey1953@y...>
wrote:
> I wouldn't give Joe Morrow (the owner of AIM) the time of day. His
shop is like a prison camp with cameras everywhere, and you have to
go thru a metal detector to leave the place. He treats his employees
like crap, and he screwed me out of $800.00 when I quit there because
of horribly unsafe working conditions. The "engineers" he has working
there are nothing but a bunch of minimum wage kids cobbling up crap.
If you REALLY want to know what I think, I'll let you know, and I
won't sugar-coat it like I am here.
>
> nathanielaz <nathanielaz@y...> wrote:Over at aim industries/
truckn. www.truckn.com
> They are in mesa off hibbert and broadway. Can make any size wheel
> combo and better prices than anyone.
>
>
> --- In az_vjc@yahoogroups.com, "Casper" wrote:
> > Can anyone help me out with this issue. I have seen other XJ's
> running billet spacers to allow for the use of certain wheels and
> such. I am looking to gain in the area of 4.5 backspacing. I have
> found some at Performance Wheel and Spidertrax. They are asking
> around 50.00 to 60.00 each. Made from T6061 alloy Aluminum. Is this
> a good idea, and where in the valley can I find them. How much? Any
> help with this would be greatly appreciated.
> >
> > Thanks,
> > Casper
> >
> >
> > [Non-text portions of this message have been removed]
>
>
>
>
> Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
>
>
>
>
> ---------------------------------
> Do you Yahoo!?
> Yahoo! SiteBuilder - Free, easy-to-use web site design software
>
> [Non-text portions of this message have been removed]
88165 From: Linda <minihummer@w...>
Date: Fri Jul 25, 2003 7:44am
Subject: Re: Axle Shaft lengths
Jim,
You keep mentioning you are going to ASU. What PoS? How far along are
you? Just curious. I am an MET major at ASU-East. I am in my junior
year there. Because of FT work I can take at most 3 classes a
semester. I can't wait to get out of IT! It is sooooo boring!
Any decision on that axle housing? Steve won't be disappointed if you
turn down the 6-pack offer. I found a site selling those axle
housings from $250-800.
I had a great link on axle widths and axle shaft lengths, but it
disappeared. I wish I had made a copy of it. It came from the FS Jeep
website. Someone went to great lengths to post the measurements for
Jeep and truck axles from the 1940s to present.
Linda
--- In az_vjc@yahoogroups.com, "James Towle" <James.Towle@a...> wrote:
> I am looking for the lengths of the axle shafts for my project,
without
> taking them out again and measuring them. Any help?
> The BOM for the axle is 610027-2. I am using the inner shafts from
this one
> and the out shafts from a BOM 603685-6. Appartently I am stupid, I
would
> think the shaft lengths would be listed some where on this WWW.
>
> I want to see how much alloy shafts would cost, before I break them
on the
> trail.
>
> --James
>
> PS - The body man called yesterday and my tub will be ready on
Saturday, or
> maybe Monday. Finals were today, for summer school, with three
weeks until
> school starts again I might be able to throw my junk together.
88166 From: sharxjeep <sharxjeep@c...>
Date: Fri Jul 25, 2003 7:46am
Subject: Re: Crown King Trail Times
why isnt ranger Wade on my run?...huh...huh...answer me that LOL
and to think, I was actually starting to like you :)
everybodies a comedian. Your a riot
Sharky
--- In az_vjc@yahoogroups.com, Wade Ungaro <swaders7@y...> wrote:
> Ranger Wade says "Only Sharky can prevent forest rollovers!"
>
> ~Wade
>
> sharxjeep <sharxjeep@c...> wrote:
>
> What do you say to something like that...? I have no idea so I
> wont LOL
>
> Sharky
>
>
> --- In az_vjc@yahoogroups.com, "Hackle" wrote:
> > I just wanted to send this message and I or someone else will
> send it again
> > before the trip. The trail times are when the group leaves. If
you
> sign up
> > for my early bird run at 6:00 and show up at 6:05 you will be
well
> behind
> > the group and probably be aired down and ready when Stu leaves at
> 7:00. We
> > will have a lot of vehicles on the trail at the same time and
need
> to be on
> > time to keep each group separate from the others. Of course
> everyone wants
> > to be well ahead of Sharky as we all know how his trips to Crown
> King end
> > up. BTW anyone that is an EMT might want to think about joining
> Sharky's
> > group:) Jim F. aka Hackle
> >
> > "I refuse to belong to any group that would have me as a member"
> Groucho
> > Marx
> > Member of the original dirty half dozen.
> > http://www.users.qwest.net/~jkflorence/
>
>
>
>
> Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
>
>
>
>
>
> ---------------------------------
> Do you Yahoo!?
> The New Yahoo! Search - Faster. Easier. Bingo.
>
> [Non-text portions of this message have been removed]
88167 From: FredTJ <fredtj@c...>
Date: Fri Jul 25, 2003 7:50am
Subject: Jeep parts
For you Phoenix people;
Can anyone provide phone numbers for any of the wrecking yards up there.
I'm in the market for a front HP30 from a late model XJ.
Thanks,
Fred
88168 From: sharxjeep <sharxjeep@c...>
Date: Fri Jul 25, 2003 7:50am
Subject: Re: Crown King Trail Times
It's funny you whould mention that...I have been trying to contact my
shrink for months now and she wont return my calls...how wrong is
that! So if anyone happens to know a good one let me know.
Thanks
Sharky
--- In az_vjc@yahoogroups.com, Wade Ungaro <swaders7@y...> wrote:
> I think a psychiatrist would be best.
>
> ~Wade
>
> Chris <my1stjeep@e...> wrote:
> Is that giving him too much credit?
>
> Chris
> -------------------------------------------------------------
>
>
> --- In az_vjc@yahoogroups.com, "Stu Olson" wrote:
> > Hmmm.....do you think a large animal vet would be better
qualified?
> >
> > > -----Original Message-----
> > > From: Chris [mailto:my1stjeep@e...]
> > > Sent: Thursday, July 24, 2003 3:49 PM
> > > To: az_vjc@yahoogroups.com
> > > Subject: [az_vjc] Re: Crown King Trail Times
> > >
> > >
> > > I am not sure an EMT is qualified to help Sharky... :o)
> > >
> > > Chris
> > > ----------------------------------------------------------------
-
> ---
> > >
> > >
> > >
> > > --- In az_vjc@yahoogroups.com, "Hackle" wrote:
> > > > I just wanted to send this message and I or someone else
> > > will send it again
> > > > before the trip. The trail times are when the group leaves.
If
> you
> > > sign up
> > > > for my early bird run at 6:00 and show up at 6:05 you will be
> well
> > > behind
> > > > the group and probably be aired down and ready when Stu
leaves
> at
> > > 7:00. We
> > > > will have a lot of vehicles on the trail at the same time and
> need
> > > to be on
> > > > time to keep each group separate from the others. Of course
> > > everyone wants
> > > > to be well ahead of Sharky as we all know how his trips to
> Crown
> > > King end
> > > > up. BTW anyone that is an EMT might want to think about
joining
> > > Sharky's
> > > > group:) Jim F. aka Hackle
> > > >
> > > > "I refuse to belong to any group that would have me as a
> member"
> > > Groucho
> > > > Marx
> > > > Member of the original dirty half dozen.
> > > > http://www.users.qwest.net/~jkflorence/
> > >
> > >
> > >
> > >
> > > Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
> > >
> > >
> > >
>
>
>
>
> Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
>
>
>
>
>
>
> ---------------------------------
> Do you Yahoo!?
> The New Yahoo! Search - Faster. Easier. Bingo.
>
> [Non-text portions of this message have been removed]
88169 From: DougB <azjeep@c...>
Date: Fri Jul 25, 2003 8:09am
Subject: Re: Jeep parts
Fred,
Try this:
http://www.car-part.com/
Doug
----- Original Message -----
From: "FredTJ" <fredtj@c...>
To: <az_vjc@yahoogroups.com>
Sent: Friday, July 25, 2003 7:50 AM
Subject: [az_vjc] Jeep parts
> For you Phoenix people;
> Can anyone provide phone numbers for any of the wrecking yards up there.
> I'm in the market for a front HP30 from a late model XJ.
>
>
> Thanks,
> Fred
>
>
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
88170 From: AzVJC Website <azvjc@a...>
Date: Fri Jul 25, 2003 8:14am
Subject: [TR] Coves of Saguaro Lake - Sunday, July 27, 2003 - Reminder
Hello All,Phil Thompson is leading a Coves of Saguaro Lake trail run on Sunday, July 27, 2003.<br><br>When: 8:30
Where: Butcher Jones Gate. I'll be passing U.S. 60 and Power Rd. about 8:00 if you need to Jeep a van to the gate.
Rating: 2.5+
Length: 3+ hrs.
CB Channel: 4
Plenty of different terrain here for all vehicle set ups. Gonna do some trials and hang out by the lake. Bring lots of water and some lunch and we'll make a day out of it.
At the Coves of Saguaro Lake, there are at least 4 coves to play in, on, and around. Many hill climbs provide a challenge to all levels of 4-Wheelers and vehicles.<br>
<br>
Enjoy and remember to TREAD Lightly!
http://www.azvjc.org/default.asp?A=1&ID=962
Click the link above To Add Your Name to the Sign Up List
Thank You,
- The AzVJC Website
88171 From: Siade, Randy <randy.siade@u...>
Date: Fri Jul 25, 2003 8:08am
Subject: RE: [az_vgc] [OT] Last CCW class for a LONG time
I have been wanting to take one of your class for some time now but seem to
always have a conflict when they are schedule. I will be leaving this Sunday
for LA. I have to work in my LA office for a couple of weeks so I can't make
this weekend either.
-----Original Message-----
From: tom lafrance [mailto:tlafrance@j...]
Sent: Friday, July 25, 2003 5:03 AM
To: az_vgc@yahoogroups.com; az_vjc@yahoogroups.com
Subject: [az_vgc] [OT] Last CCW class for a LONG time
I have a few seats left in THIS weekends CCW class.
I have chosen to not renew my liability insurance or teach anymore
classes due to declining attendance and increased time demands from my
family life. If you want a permit from me, this is your last
opportunity. Please call 480-985-0005 and reserve your seat.
Tom LaFrance
-------------------------------------------------------------------------
-------------------------------
Did you ever notice that the people who are late are much happier than
the ones who turn up on time?
To unsubscribe from this group, send an email to:
az_vgc-unsubscribe@yahoogroups.com
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
88172 From: robert_j_rogers2 <robert.rogers@h...>
Date: Fri Jul 25, 2003 8:22am
Subject: [TR] Table Mesa Area - Saturday - Challange?
Only 1 person to represent the club! I guess what I heard from the
P4W was right. No one would show as you would either be afraid or too
disorganized to make it.
--- In az_vjc@yahoogroups.com, AzVJC Website <azvjc@a...> wrote:
> Hello All,Robert (Roy) Rogers is leading a Table Mesa Area trail
run on Saturday, July 26, 2003.<br><br>When: 7PM meet 7:30PM start
> Where: West side of Table Mesa exit where the dirt starts.
> Rating: 2.0+
> Length:
> CB Channel: 4
>
> Trail run with the Phoenix 4 Wheelers. Expext to do more than 1
trail, possibly Terminator and Raw Deal. The number of runs will
depend on who shows and what trail rating they want to do. Bring
plenty of liquids, it will still be hot till late. Do not know when
we will finish so bring lunch/snacks. See you there.
>
88173 From: RICK BEER <RIKNAZ@M...>
Date: Fri Jul 25, 2003 8:22am
Subject: CK run / permits
I just looked at my permit & my permit expires before this run-- need to get another one soon
THANKS RICK BEER
[Non-text portions of this message have been removed]
88174 From: CANT W8 <rlpii@q...>
Date: Fri Jul 25, 2003 8:28am
Subject: Re: Jeep parts
Fred,
Try:
AMC 4 X 4 Salvage
6741 W. Belmont
Glendale, AZ
623-937-5899
1-800-882-5337
http://www.AMC4x4.com
HTH
Bob
74 CJ-5
--- In az_vjc@yahoogroups.com, "FredTJ" <fredtj@c...> wrote:
> For you Phoenix people;
> Can anyone provide phone numbers for any of the wrecking yards up
there.
> I'm in the market for a front HP30 from a late model XJ.
>
>
> Thanks,
> Fred
88150 From: <hunteroffroad@a...>
Date: Thu Jul 24, 2003 7:57pm
Subject: (FS) Dodge Dropin Bedliner
I have a plastic beliner that will 94-02 dodge short bed. It is factory bed
liner.
I have no idea if it wil fit any other short bed.
It is in decent shape
50.00 ?? 40.00 ?? 30.00 ?? make an offer
Like to give it a good home :)
John K
480-557-7577
[Non-text portions of this message have been removed]
--------------------------------------------------------------------------------
ADVERTISEMENT
88151 From: Kevin Gallagher <GIThunder81@c...>
Date: Fri Jul 25, 2003 1:07am
Subject: RE: Need Paint Work
I am heading to petes tomorrow with all your requests and he wil have
the estimates for me a day or 2 after. Thanx for all the support as I am
sure when I walk in there and say hey I have a bout 5 projects lined up
for you what can you do for me should turn out well. I will post the
estimates when I receive them.
-----Original Message-----
From: G. Rob Williams [mailto:g_rob_williams@y...]
Sent: Thursday, July 24, 2003 8:36 PM
To: Kevin Gallagher
Subject: RE: [az_vjc] Need Paint Work
I have about 5 major spots to paint on my Suburban. It
is already black so it wont be hard to colormatch it.
If it is cheaper I'll even dust one coat on the entire
vehicle. I am trying to trade it in on a new tow rig,
but I am not getting close to what it is worth because
the paint on it. I dont know if he can give me quote
wise on it, but I basically need the hood, passenger
front door and rear panel behind the passenger rear
tire touched up, or if it is cheaper, one coat on the
entire truck. -Rob
--- Kevin Gallagher <githunder81@c...> wrote:
> I know a guy out here in buckeye, he does excellent
> work and very cheap.
> I had him do some work for me and he charged 300
> less than others
> wanted. If you want his name let me know. He needs
> some favors from me
> so I might be abloe to get a discount if other
> members of the AZVJC are
> interested as well, let me know what you want done
> and I can get ya and
> apprx price
>
> -----Original Message-----
> From: Rob Williams [mailto:g_rob_williams@y...]
>
> Sent: Wednesday, July 23, 2003 3:25 PM
> To: az_vjc@yahoogroups.com
> Subject: [az_vjc] Need Paint Work
>
> I need someone to touch up/fix some paint issues. Is
> there anyone in
> the club that can do this, or know where to go to
> have it done. I am
> pretty much just looking for a decent job at a good
> price. E-mail me
> off list if you can help me out. -Rob
>
>
>
>
> Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
>
>
>
>
__________________________________
Do you Yahoo!?
Yahoo! SiteBuilder - Free, easy-to-use web site design software
http://sitebuilder.yahoo.com
88152 From: Casper <casper@c...>
Date: Fri Jul 25, 2003 0:56am
Subject: Billet Spacers?
Can anyone help me out with this issue. I have seen other XJ's running billet spacers to allow for the use of certain wheels and such. I am looking to gain in the area of 4.5 backspacing. I have found some at Performance Wheel and Spidertrax. They are asking around 50.00 to 60.00 each. Made from T6061 alloy Aluminum. Is this a good idea, and where in the valley can I find them. How much? Any help with this would be greatly appreciated.
Thanks,
Casper
[Non-text portions of this message have been removed]
88153 From: nathanielaz <nathanielaz@y...>
Date: Fri Jul 25, 2003 4:30am
Subject: Re: Billet Spacers?
Over at aim industries/ truckn. www.truckn.com
They are in mesa off hibbert and broadway. Can make any size wheel
combo and better prices than anyone.
--- In az_vjc@yahoogroups.com, "Casper" <casper@c...> wrote:
> Can anyone help me out with this issue. I have seen other XJ's
running billet spacers to allow for the use of certain wheels and
such. I am looking to gain in the area of 4.5 backspacing. I have
found some at Performance Wheel and Spidertrax. They are asking
around 50.00 to 60.00 each. Made from T6061 alloy Aluminum. Is this
a good idea, and where in the valley can I find them. How much? Any
help with this would be greatly appreciated.
>
> Thanks,
> Casper
>
>
> [Non-text portions of this message have been removed]
88154 From: tom lafrance <tlafrance@j...>
Date: Fri Jul 25, 2003 5:02am
Subject: [OT] Last CCW class for a LONG time
I have a few seats left in THIS weekends CCW class.
I have chosen to not renew my liability insurance or teach anymore
classes due to declining attendance and increased time demands from my
family life. If you want a permit from me, this is your last
opportunity. Please call 480-985-0005 and reserve your seat.
Tom LaFrance
-------------------------------------------------------------------------
-------------------------------
Did you ever notice that the people who are late are much happier than
the ones who turn up on time?
88155 From: james kilcullen <whoozey1953@y...>
Date: Fri Jul 25, 2003 5:36am
Subject: Re: Re: Where can I find a CJ7 tailgate??
I assume you want to convert your swing away tailgate to a drop down? Why not convert your existing one? I have seen it done on a YJ.
Matt OBrien <makaioo@y...> wrote:Used CJ tailgates are typically hard to find, especially one that's
not abused. If you can't find a used tailgate, you can get one new
from http://www.4wd.com
Steel Tailgate, CJ7, CJ8, 1976-86
Product Number: 5454025
$94.95
Good luck,
Matt
K7MTO
--- In az_vjc@yahoogroups.com, "yzguyone25" wrote:
> I am looking for a CJ7 tailgate and hinges! Does anyone have one
> laying around they would like to sell or maybe seen one laying
around
> in a junkyard? I would like one in decent shape. Paint wise is
no
> biggie, just prefer not to have any dents or holes.
>
> If there is any interest I am willing to trade my TJ tailgate and
> hinges.
>
> Any heads up anywhere?
>
> Thanks a ton!
> Justin Olson
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
---------------------------------
Do you Yahoo!?
Yahoo! SiteBuilder - Free, easy-to-use web site design software
[Non-text portions of this message have been removed]
88156 From: james kilcullen <whoozey1953@y...>
Date: Fri Jul 25, 2003 5:46am
Subject: Re: Re: Billet Spacers?
I wouldn't give Joe Morrow (the owner of AIM) the time of day. His shop is like a prison camp with cameras everywhere, and you have to go thru a metal detector to leave the place. He treats his employees like crap, and he screwed me out of $800.00 when I quit there because of horribly unsafe working conditions. The "engineers" he has working there are nothing but a bunch of minimum wage kids cobbling up crap. If you REALLY want to know what I think, I'll let you know, and I won't sugar-coat it like I am here.
nathanielaz <nathanielaz@y...> wrote:Over at aim industries/ truckn. www.truckn.com
They are in mesa off hibbert and broadway. Can make any size wheel
combo and better prices than anyone.
--- In az_vjc@yahoogroups.com, "Casper" wrote:
> Can anyone help me out with this issue. I have seen other XJ's
running billet spacers to allow for the use of certain wheels and
such. I am looking to gain in the area of 4.5 backspacing. I have
found some at Performance Wheel and Spidertrax. They are asking
around 50.00 to 60.00 each. Made from T6061 alloy Aluminum. Is this
a good idea, and where in the valley can I find them. How much? Any
help with this would be greatly appreciated.
>
> Thanks,
> Casper
>
>
> [Non-text portions of this message have been removed]
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
---------------------------------
Do you Yahoo!?
Yahoo! SiteBuilder - Free, easy-to-use web site design software
[Non-text portions of this message have been removed]
88157 From: AzVJC Website <azvjc@a...>
Date: Fri Jul 25, 2003 6:31am
Subject: [TR] Unspecified - Saturday, July 26, 2003
Hello All,Paul Tenniswood is leading an Unspecified trail run on Saturday, July 26, 2003.<br><br>When: Meet between 7:00am and 7:15am at the Cottenwood Canyon Ranch rd off hwy 79 north of Florance...
Where: florance
Rating: None
Length: depends
CB Channel: 5
Bad Medicine... the trail is a fairly short wash that has many challanging obsticles ,most have bypasses... some do not... If it isn't enought to do just that trail we can add upper ajax or some other trail to the end...
http://www.azvjc.org/default.asp?A=1&ID=965
Click the link above To Add Your Name to the Sign Up List
Thank You,
- The AzVJC Website
88158 From: AzVJC Website <azvjc@a...>
Date: Fri Jul 25, 2003 6:33am
Subject: [TR] Unspecified - Saturday, July 26, 2003 - Reminder
Hello All,Paul Tenniswood is leading an Unspecified trail run on Saturday, July 26, 2003.<br><br>When: Meet between 7:00am and 7:15am
Where: Cottenwood Canyon Ranch rd off 79 north of Florance
Rating: None
Length: depends
CB Channel: 5
Bad Medicine... the trail is a fairly short wash that has many challanging obsticles ,most have bypasses... some do not... If it isn't enought to do just that trail we can add upper ajax or some other trail to the end...
http://www.azvjc.org/default.asp?A=1&ID=965
Click the link above To Add Your Name to the Sign Up List
Thank You,
- The AzVJC Website
88159 From: AzVJC Website <azvjc@a...>
Date: Fri Jul 25, 2003 6:34am
Subject: [TR] Unspecified - Saturday, July 26, 2003 - Reminder
Hello All,Paul Tenniswood is leading an Unspecified trail run on Saturday, July 26, 2003.<br><br>When: Meet between 7:00am and 7:15am
Where: Cottenwood Canyon Ranch rd off 79 north of Florance
Rating: None
Length: depends
CB Channel: 5
Bad Medicine... the trail is a fairly short wash that has many challanging obsticles ,most have bypasses... some do not... If it isn't enought to do just that trail we can add upper ajax or some other trail to the end...
http://www.azvjc.org/default.asp?A=1&ID=965
Click the link above To Add Your Name to the Sign Up List
Thank You,
- The AzVJC Website
88160 From: Joe West <arizonajeep@c...>
Date: Fri Jul 25, 2003 6:35am
Subject: RE: Ream Control Arm Weld...I think
Jake,
If you end up having to pay for the weld to be repaired; I'd recommend
Hunter Offroad... extremely good prices and work that is second to none.
Joe West
-----Original Message-----
From: Jayke Thorpe [mailto:jeepboy_3@y...]
Sent: Thursday, July 24, 2003 5:18 PM
To: AZVJC
Subject: [az_vjc] Ream Control Arm Weld...I think
So, today, turning the corner I noticed a clunk from my rear-end. Well
my rear control arm on the drivers side has broken the weld. Is there
anyone who can weld this? I can supply frosty bev and food and help on
your rig or what ever, though I am not that mechanically inclined. Any
help would be great.
Thank You,
--S. Jayke Thorpe
S. Jayke Thorpe
---------------------------------
Do you Yahoo!?
Yahoo! SiteBuilder - Free, easy-to-use web site design software
[Non-text portions of this message have been removed]
Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
88161 From: Joe West <arizonajeep@c...>
Date: Fri Jul 25, 2003 6:38am
Subject: RE: Learn to do it yourself.. if you don't know how; I'd be happy to show you. Was RE: Dealership maintenance
Hey Phil... I'd be happy to teach you how to read wiring diagrams. I'm
out on travel for the next three weeks, but when I get back, let's get
together for a couple of hours.
Joe
-----Original Message-----
From: Phil Thompson [mailto:ablockalypse@y...]
Sent: Thursday, July 24, 2003 3:41 PM
To: az_vjc@yahoogroups.com
Subject: Re: Learn to do it yourself.. if you don't know how; I'd be
happy to show you. Was RE: [az_vjc] Dealership maintenance
Hey Jim,
Working on Jeeps gets in your blood. Lots of folks on here have lent
me a hand in the past and I got the chance to pay it back this last
weekend. Had a new member over and put his lift on in a couple of
hours. This whole club is that way. They get their rigs built the way
they want them so the only thing left is to work on someone else's
LOL. Most folks are more than helpful, all you gotta do is ask, the
wealth of knowledge is overwhelming, and they're always willing to
help. Service manual will go a long way, now if Someone would teach
me to read wiring diagrams...
Phil
--- In az_vjc@yahoogroups.com, "JimSerio" <jim@r...> wrote:
> Joe,
>
> I couldn't agree with you more, and I would *love* to do it myself.
> I used to perform most of the maintenence on my last truck.
> Unfortunately, where I currently live, I am unable to do any work
on
> my Jeep. If anyone is interesting in loaning me their driveway or
> work space, I'd love to do (and learn) the work myself. I also
would
> like to perform a 2-3" lift but don't have the tools for this.
>
> Maybe a monthly gathering at someone's house/shop where we can all
> do maintenence?
>
> Jim
>
>
>
>
> --- In az_vjc@yahoogroups.com, "Joe West" <joe.west@s...> wrote:
> > Jim,
> >
> > The absolute BEST thing you could do is learn to do it yourself.
> It is
> > EXTREMELY easy... Purchase a factory service manual and if you
> don't know
> > how to do it yourself... I'd be glad to teach you.
> > In fact, I'd be glad to teach anyone who is interested. If there
> is enough
> > interest; I'll put together a workshop.
> >
> > The truth is, one of the nicest aspects of Jeep ownership is
> learning to do
> > it yourself.
> >
> > Kind Regards,
> >
> > Joe West
> >
> > -----Original Message-----
> > From: JimSerio [mailto:jim@r...]
> > Sent: Thursday, July 24, 2003 10:30 AM
> > To: az_vjc@yahoogroups.com
> > Subject: [az_vjc] Dealership maintnence
> >
> >
> > Has anyone taken their Jeeps to any of the local dealers for the
> 30K
> > tune-up? What's the cost run on this and what does it include? I'm
> > leaning toward Darner since they get such good marks from this
> > group, but if anyone else has recommendations, I'd appreciate it.
> >
> > BTW... I'm considering a dealer as opposed to a mom/pop shop as
> I've
> > read that some warranty work may require proof of regular
> > maintenence. Who better to have those records than a dealer.
> >
> > Jim
> >
> >
> >
> >
> > Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
88162 From: AzVJC Website <azvjc@a...>
Date: Fri Jul 25, 2003 6:43am
Subject: [TR] Technical Workshop - Sunday, November 2, 2003 - Reminder
Hello All,Joe West is leading a Technical Workshop trail run on Sunday, November 2, 2003.<br><br>When: 8am
Where: My home located at 649 South 30th Circle, Mesa Arizona 85204. Yahoo maps will provide a great map which will bring you directly to my home.
Rating: 2.0-
Length: Finished by Noon
CB Channel:
This is the fourth Kill Switch workshop.
We will be installing stand-alone kill switches on all vehicles.<br>
<br>
The cost for the workshop will be $20 per person and will include everything you need to install a kill switch.<br>
<br>
The workshop can hold approximately 30 vehicles.<br>
<br>
More details will follow as the time for the workshop gets closer.<br>
<br>
I will continue to schedule kill switch technical workshops every few months until everyone who wants to have an anti-theft kill switch installed has one. I will then schedule them once a year or so. I still have people contacting me who want to install a kill switch so I have scheduled this fourth workshop for Sunday, November 2nd at 9:00am.
This is kill switch technical workshop number 4. The purpose of this workshop is threefold:
1. To keep your rig from being a theft statistic.
2. To show you how easy it is to install a kill switch.
3. To spend some fun time just hanging out with Jeepers.
I have picked a date for the fourth kill-switch workshop a few months out to enable people to sign up over a longer period of time. I will update the information in this run as necessary, but for the most part all of the information you will need is here. The limit for the number of rigs we can fit in my yard and cul-de-sac is 30 so this will be the maximum number of people who can sign up. Please note that YOU will be doing the work in this workshop and I will be guiding, assisting, teaching, and testing your installs (and fixing any problems which may occur).
The price for the kill switch alone is $20, and includes everything you will need to install the switch.
Please note: I am NOT making any money on the kill switches and hood locks... the charge just covers the cost of the hardware with a couple of dollars extra thrown in to cover supplies. I do this workshop for fun and to help people out... not to make money.
Unfortunately, because of problems I had with purchasing hoodlock/killswitches for people who didn't show and didn't pay (leaving me stuck with the hardware), it will be necessary for people to pay in advance. To pay for your kill switch, sign up for this run and then send a check for the appropriate amount to my home address shown below. In the memo area on your check, please put kill switch. No matter how early you send out your payment, I will not cash the check until I actually purchase the kill switch.
The kill switch type will be determined by the year, make, and model of the Jeep being fitted with the switch. For those members with Wranglers/CJs and other SWB Jeeps with no hood locks, I will encourage a group buy of a hood lock kill switch combination. Once I determine how many people sign up and what kind of vehicles they have, I will put together a list of required materials and purchase them for everyone. Individual members can choose what kind of kill switch they want or I will determine it for them based on vehicle type if they have no preference. I will provide all tools and will purchase bulk materials (wires, switches, solder, connectors, electrical tape, zip ties, etc) which everyone will split the cost of. If you are interested, please sign up.
VERY IMPORTANT:
All Participants in the clinic MUST give me the following information:
1. Year and model of vehicle on which we will be installing the kill switch
2. Do you have a FACTORY service manual OR a service manual with wiring schematics for your vehicle?
3. Which of the following tools can you bring: drill, drill bits, wire cutters, metric and/or standard socket set, wire strippers, wire crimpers, nylon ties, electrical tape, soldering iron/solder, long extension cords, multi-outlet adaptors/short extension cords, volt-ohm meters or DVM, blowdryer (for heat-shrink tubing).
VERY VERY IMPORTANT:
My home address is:
649 S. 30th Circle, Mesa, Arizona 85204.
<br>
My home phone is:
(480) 325-9419
My cell phone is:
(602) 616-0785
You can obtain very good directions from Yahoo maps... but a brief set of directions are as follows:
Take 60 headed East and get off on Gilbert Road.
Head North on Gilbert Road (Left) to Broadway Road.
Head East on Broadway (right) to 30th street (30th street is the FIRST residential street you can make a right on just past the light at Lindsay... do not turn into the small community just east of Walgreens.
Head South (right) on 30th Street.
30th Street dead ends in my Cul-De-Sac and my home is the one with all the palm trees in the yard.
PLEASE PLEASE park along 30th street and WALK to my home. The reason that I am asking this is because I want to group like vehicles together to simplify installations. After everyone parks along 30th street, I will have a short meeting on my front porch and then I will ask all YJ owners to go get their vehicles and we will place them in one location in my yard. I will then ask all TJ owners to go get their vehicles and will park them in another location... and so on until all vehicle types are grouped together in my yard or cul-de-sac.
After everyone is grouped together, I will walk everyone through the steps of installing kill switches... and we will work together as a team to get them installed. To avoid having any electrical problems, you will be required to disconnect the positive lead on your battery BEFORE we do any work on your vehicle.
Please plan on bringing a cooler with drinks, cups and/or snacks if you will need them.
I will post this entire post to the "trip" on Azvjc.org if people need to reference it at a later date.
If you have suggestions and you see something I have forgotten, please let me know.
And last but not least, if you would like to come hang out and HELP or just watch and learn... I'm sure we could use all the help we can get. Everyone interested is welcome to show up.
If you have any questions, please contact me via email at:
arizonajeep@c...
Kind Regards,
Joe West
Technical workshops happen every once in a while and are intended as a "How To" class.
http://www.azvjc.org/default.asp?A=1&ID=904
Click the link above To Add Your Name to the Sign Up List
Thank You,
- The AzVJC Website
88163 From: jetowle2000 <James.Towle@a...>
Date: Fri Jul 25, 2003 7:29am
Subject: Re: Ream Control Arm Weld...I think
(where was this orignal message?)
Frosty beverage......... LOL
Jake, where are you at? I am in Chandler. How soon do you need this
done? (loaded question) I have to go pick up my welding unit, I let
a friend borrow it (but, with my junk on it's way home I need my
welder anyway).
Let me know. HTH
--James
--- In az_vjc@yahoogroups.com, "Joe West" <arizonajeep@c...> wrote:
> Jake,
>
> If you end up having to pay for the weld to be repaired; I'd
recommend
> Hunter Offroad... extremely good prices and work that is second to
none.
>
> Joe West
>
> -----Original Message-----
> From: Jayke Thorpe [mailto:jeepboy_3@y...]
> Sent: Thursday, July 24, 2003 5:18 PM
> To: AZVJC
> Subject: [az_vjc] Ream Control Arm Weld...I think
>
> So, today, turning the corner I noticed a clunk from my rear-end.
Well
> my rear control arm on the drivers side has broken the weld. Is
there
> anyone who can weld this? I can supply frosty bev and food and
help on
> your rig or what ever, though I am not that mechanically
inclined. Any
> help would be great.
> Thank You,
> --S. Jayke Thorpe
>
>
> S. Jayke Thorpe
>
> ---------------------------------
> Do you Yahoo!?
> Yahoo! SiteBuilder - Free, easy-to-use web site design software
>
> [Non-text portions of this message have been removed]
>
>
>
>
> Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
88164 From: Linda <minihummer@w...>
Date: Fri Jul 25, 2003 7:34am
Subject: Re: Billet Spacers?
FWIW, I ran 16x8 wheels w/4.5" backspacing on my ZJ without spacers.
It limits the width of the tire you can run, but I have fondness for
narrow tires.
Linda
--- In az_vjc@yahoogroups.com, james kilcullen <whoozey1953@y...>
wrote:
> I wouldn't give Joe Morrow (the owner of AIM) the time of day. His
shop is like a prison camp with cameras everywhere, and you have to
go thru a metal detector to leave the place. He treats his employees
like crap, and he screwed me out of $800.00 when I quit there because
of horribly unsafe working conditions. The "engineers" he has working
there are nothing but a bunch of minimum wage kids cobbling up crap.
If you REALLY want to know what I think, I'll let you know, and I
won't sugar-coat it like I am here.
>
> nathanielaz <nathanielaz@y...> wrote:Over at aim industries/
truckn. www.truckn.com
> They are in mesa off hibbert and broadway. Can make any size wheel
> combo and better prices than anyone.
>
>
> --- In az_vjc@yahoogroups.com, "Casper" wrote:
> > Can anyone help me out with this issue. I have seen other XJ's
> running billet spacers to allow for the use of certain wheels and
> such. I am looking to gain in the area of 4.5 backspacing. I have
> found some at Performance Wheel and Spidertrax. They are asking
> around 50.00 to 60.00 each. Made from T6061 alloy Aluminum. Is this
> a good idea, and where in the valley can I find them. How much? Any
> help with this would be greatly appreciated.
> >
> > Thanks,
> > Casper
> >
> >
> > [Non-text portions of this message have been removed]
>
>
>
>
> Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
>
>
>
>
> ---------------------------------
> Do you Yahoo!?
> Yahoo! SiteBuilder - Free, easy-to-use web site design software
>
> [Non-text portions of this message have been removed]
88165 From: Linda <minihummer@w...>
Date: Fri Jul 25, 2003 7:44am
Subject: Re: Axle Shaft lengths
Jim,
You keep mentioning you are going to ASU. What PoS? How far along are
you? Just curious. I am an MET major at ASU-East. I am in my junior
year there. Because of FT work I can take at most 3 classes a
semester. I can't wait to get out of IT! It is sooooo boring!
Any decision on that axle housing? Steve won't be disappointed if you
turn down the 6-pack offer. I found a site selling those axle
housings from $250-800.
I had a great link on axle widths and axle shaft lengths, but it
disappeared. I wish I had made a copy of it. It came from the FS Jeep
website. Someone went to great lengths to post the measurements for
Jeep and truck axles from the 1940s to present.
Linda
--- In az_vjc@yahoogroups.com, "James Towle" <James.Towle@a...> wrote:
> I am looking for the lengths of the axle shafts for my project,
without
> taking them out again and measuring them. Any help?
> The BOM for the axle is 610027-2. I am using the inner shafts from
this one
> and the out shafts from a BOM 603685-6. Appartently I am stupid, I
would
> think the shaft lengths would be listed some where on this WWW.
>
> I want to see how much alloy shafts would cost, before I break them
on the
> trail.
>
> --James
>
> PS - The body man called yesterday and my tub will be ready on
Saturday, or
> maybe Monday. Finals were today, for summer school, with three
weeks until
> school starts again I might be able to throw my junk together.
88166 From: sharxjeep <sharxjeep@c...>
Date: Fri Jul 25, 2003 7:46am
Subject: Re: Crown King Trail Times
why isnt ranger Wade on my run?...huh...huh...answer me that LOL
and to think, I was actually starting to like you :)
everybodies a comedian. Your a riot
Sharky
--- In az_vjc@yahoogroups.com, Wade Ungaro <swaders7@y...> wrote:
> Ranger Wade says "Only Sharky can prevent forest rollovers!"
>
> ~Wade
>
> sharxjeep <sharxjeep@c...> wrote:
>
> What do you say to something like that...? I have no idea so I
> wont LOL
>
> Sharky
>
>
> --- In az_vjc@yahoogroups.com, "Hackle" wrote:
> > I just wanted to send this message and I or someone else will
> send it again
> > before the trip. The trail times are when the group leaves. If
you
> sign up
> > for my early bird run at 6:00 and show up at 6:05 you will be
well
> behind
> > the group and probably be aired down and ready when Stu leaves at
> 7:00. We
> > will have a lot of vehicles on the trail at the same time and
need
> to be on
> > time to keep each group separate from the others. Of course
> everyone wants
> > to be well ahead of Sharky as we all know how his trips to Crown
> King end
> > up. BTW anyone that is an EMT might want to think about joining
> Sharky's
> > group:) Jim F. aka Hackle
> >
> > "I refuse to belong to any group that would have me as a member"
> Groucho
> > Marx
> > Member of the original dirty half dozen.
> > http://www.users.qwest.net/~jkflorence/
>
>
>
>
> Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
>
>
>
>
>
> ---------------------------------
> Do you Yahoo!?
> The New Yahoo! Search - Faster. Easier. Bingo.
>
> [Non-text portions of this message have been removed]
88167 From: FredTJ <fredtj@c...>
Date: Fri Jul 25, 2003 7:50am
Subject: Jeep parts
For you Phoenix people;
Can anyone provide phone numbers for any of the wrecking yards up there.
I'm in the market for a front HP30 from a late model XJ.
Thanks,
Fred
88168 From: sharxjeep <sharxjeep@c...>
Date: Fri Jul 25, 2003 7:50am
Subject: Re: Crown King Trail Times
It's funny you whould mention that...I have been trying to contact my
shrink for months now and she wont return my calls...how wrong is
that! So if anyone happens to know a good one let me know.
Thanks
Sharky
--- In az_vjc@yahoogroups.com, Wade Ungaro <swaders7@y...> wrote:
> I think a psychiatrist would be best.
>
> ~Wade
>
> Chris <my1stjeep@e...> wrote:
> Is that giving him too much credit?
>
> Chris
> -------------------------------------------------------------
>
>
> --- In az_vjc@yahoogroups.com, "Stu Olson" wrote:
> > Hmmm.....do you think a large animal vet would be better
qualified?
> >
> > > -----Original Message-----
> > > From: Chris [mailto:my1stjeep@e...]
> > > Sent: Thursday, July 24, 2003 3:49 PM
> > > To: az_vjc@yahoogroups.com
> > > Subject: [az_vjc] Re: Crown King Trail Times
> > >
> > >
> > > I am not sure an EMT is qualified to help Sharky... :o)
> > >
> > > Chris
> > > ----------------------------------------------------------------
-
> ---
> > >
> > >
> > >
> > > --- In az_vjc@yahoogroups.com, "Hackle" wrote:
> > > > I just wanted to send this message and I or someone else
> > > will send it again
> > > > before the trip. The trail times are when the group leaves.
If
> you
> > > sign up
> > > > for my early bird run at 6:00 and show up at 6:05 you will be
> well
> > > behind
> > > > the group and probably be aired down and ready when Stu
leaves
> at
> > > 7:00. We
> > > > will have a lot of vehicles on the trail at the same time and
> need
> > > to be on
> > > > time to keep each group separate from the others. Of course
> > > everyone wants
> > > > to be well ahead of Sharky as we all know how his trips to
> Crown
> > > King end
> > > > up. BTW anyone that is an EMT might want to think about
joining
> > > Sharky's
> > > > group:) Jim F. aka Hackle
> > > >
> > > > "I refuse to belong to any group that would have me as a
> member"
> > > Groucho
> > > > Marx
> > > > Member of the original dirty half dozen.
> > > > http://www.users.qwest.net/~jkflorence/
> > >
> > >
> > >
> > >
> > > Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
> > >
> > >
> > >
>
>
>
>
> Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
>
>
>
>
>
>
> ---------------------------------
> Do you Yahoo!?
> The New Yahoo! Search - Faster. Easier. Bingo.
>
> [Non-text portions of this message have been removed]
88169 From: DougB <azjeep@c...>
Date: Fri Jul 25, 2003 8:09am
Subject: Re: Jeep parts
Fred,
Try this:
http://www.car-part.com/
Doug
----- Original Message -----
From: "FredTJ" <fredtj@c...>
To: <az_vjc@yahoogroups.com>
Sent: Friday, July 25, 2003 7:50 AM
Subject: [az_vjc] Jeep parts
> For you Phoenix people;
> Can anyone provide phone numbers for any of the wrecking yards up there.
> I'm in the market for a front HP30 from a late model XJ.
>
>
> Thanks,
> Fred
>
>
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
88170 From: AzVJC Website <azvjc@a...>
Date: Fri Jul 25, 2003 8:14am
Subject: [TR] Coves of Saguaro Lake - Sunday, July 27, 2003 - Reminder
Hello All,Phil Thompson is leading a Coves of Saguaro Lake trail run on Sunday, July 27, 2003.<br><br>When: 8:30
Where: Butcher Jones Gate. I'll be passing U.S. 60 and Power Rd. about 8:00 if you need to Jeep a van to the gate.
Rating: 2.5+
Length: 3+ hrs.
CB Channel: 4
Plenty of different terrain here for all vehicle set ups. Gonna do some trials and hang out by the lake. Bring lots of water and some lunch and we'll make a day out of it.
At the Coves of Saguaro Lake, there are at least 4 coves to play in, on, and around. Many hill climbs provide a challenge to all levels of 4-Wheelers and vehicles.<br>
<br>
Enjoy and remember to TREAD Lightly!
http://www.azvjc.org/default.asp?A=1&ID=962
Click the link above To Add Your Name to the Sign Up List
Thank You,
- The AzVJC Website
88171 From: Siade, Randy <randy.siade@u...>
Date: Fri Jul 25, 2003 8:08am
Subject: RE: [az_vgc] [OT] Last CCW class for a LONG time
I have been wanting to take one of your class for some time now but seem to
always have a conflict when they are schedule. I will be leaving this Sunday
for LA. I have to work in my LA office for a couple of weeks so I can't make
this weekend either.
-----Original Message-----
From: tom lafrance [mailto:tlafrance@j...]
Sent: Friday, July 25, 2003 5:03 AM
To: az_vgc@yahoogroups.com; az_vjc@yahoogroups.com
Subject: [az_vgc] [OT] Last CCW class for a LONG time
I have a few seats left in THIS weekends CCW class.
I have chosen to not renew my liability insurance or teach anymore
classes due to declining attendance and increased time demands from my
family life. If you want a permit from me, this is your last
opportunity. Please call 480-985-0005 and reserve your seat.
Tom LaFrance
-------------------------------------------------------------------------
-------------------------------
Did you ever notice that the people who are late are much happier than
the ones who turn up on time?
To unsubscribe from this group, send an email to:
az_vgc-unsubscribe@yahoogroups.com
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
88172 From: robert_j_rogers2 <robert.rogers@h...>
Date: Fri Jul 25, 2003 8:22am
Subject: [TR] Table Mesa Area - Saturday - Challange?
Only 1 person to represent the club! I guess what I heard from the
P4W was right. No one would show as you would either be afraid or too
disorganized to make it.
--- In az_vjc@yahoogroups.com, AzVJC Website <azvjc@a...> wrote:
> Hello All,Robert (Roy) Rogers is leading a Table Mesa Area trail
run on Saturday, July 26, 2003.<br><br>When: 7PM meet 7:30PM start
> Where: West side of Table Mesa exit where the dirt starts.
> Rating: 2.0+
> Length:
> CB Channel: 4
>
> Trail run with the Phoenix 4 Wheelers. Expext to do more than 1
trail, possibly Terminator and Raw Deal. The number of runs will
depend on who shows and what trail rating they want to do. Bring
plenty of liquids, it will still be hot till late. Do not know when
we will finish so bring lunch/snacks. See you there.
>
88173 From: RICK BEER <RIKNAZ@M...>
Date: Fri Jul 25, 2003 8:22am
Subject: CK run / permits
I just looked at my permit & my permit expires before this run-- need to get another one soon
THANKS RICK BEER
[Non-text portions of this message have been removed]
88174 From: CANT W8 <rlpii@q...>
Date: Fri Jul 25, 2003 8:28am
Subject: Re: Jeep parts
Fred,
Try:
AMC 4 X 4 Salvage
6741 W. Belmont
Glendale, AZ
623-937-5899
1-800-882-5337
http://www.AMC4x4.com
HTH
Bob
74 CJ-5
--- In az_vjc@yahoogroups.com, "FredTJ" <fredtj@c...> wrote:
> For you Phoenix people;
> Can anyone provide phone numbers for any of the wrecking yards up
there.
> I'm in the market for a front HP30 from a late model XJ.
>
>
> Thanks,
> Fred