PDA

View Full Version : rancho 9000's



ROCRWLR
10-12-2008, 08:17 PM
I have a pair of front and rear rancho 9000 shocks. used for less than 1000 miles all on the pavement. $200.00 OBO

2 - RS999267 17"-23"
2 - RS999254 20-31"


http://i172.photobucket.com/albums/w35/dhovland1/ranchoshocks001.jpg

Bilt4Comfort
10-13-2008, 06:10 PM
Can I have one of the knobs?

ROCRWLR
10-13-2008, 06:23 PM
No

SHNIPE
10-13-2008, 06:41 PM
want some pink shock boots for em?

Ryan
10-13-2008, 07:49 PM
can those go on my tj with a 3.5in. lift? do they just replace the ranchos i have now?

ROCRWLR
02-09-2009, 07:38 PM
BTT, need to sell these. I need a lockrite for my D/30


Dean

1BDRUBI
02-09-2009, 08:12 PM
wish i knew what the measurements for mine are id buy them i have 2 blown shocks. guess i need to pull mine this weekend and measure them. ill check back with you and see if you still have them

jeepdude775
02-13-2009, 07:12 AM
what are the part number?

Xiled1
02-13-2009, 09:25 AM
You'll need adapters to put them on the front of a TJ. All the ones in the picture have eyelets top and bottom. Which I assume is one front and one rear. Makes sense since they were on a YJ.

lancetkenyon
02-13-2009, 09:44 AM
A 20" long body shock at compression, and with needing a post eliminator on the top, and bar pin eliminator on the bottom, will only work with about 8-10" of lift on a TJ front. I have both eliminators on my rig, and have a 19" length collapsed shock on my rig with 7" of lift, and it only has about 2.5" of up travel, but a LOT of droop, with 14" travel shocks.

SavageSun4x4
02-13-2009, 10:07 AM
Can I have one of the knobs?

Call Rancho, they will send some free.

I have a couple laying around that I manage to find from time to time. If you are in bind I can go digging...or if you can wait I will be removing them from all my shocks soon...