blooddrive
01-08-2004, 05:18 PM
Collapse MessagMsg # Date | Thread
83041 From: intertwingled <intertwingled@q...>
Date: Sun Apr 20, 2003 9:29am
Subject: Re: [OT][FS] Twin size reclining/massage/heat/ bed
What's your sleep number, Joe? =P
Joe W wrote:
> I have a virtually new twin size bed complete with mattress, box springs,
> and the base which:
>
> Elevates head.
> Elevates feet.
> Multiple vibration settings.
> Heat.
>
> and comes with a remote controller.
>
> This would make a GREAT bed for someone's nice garage. <grin>
>
> Sell or trade for ???
>
> Reply via email.
>
> Joe West
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
--
Even the safest course is fraught with peril.
--------------------------------------------------------------------------------
ADVERTISEMENT
83042 From: OneBdJeep <onebdjeep@c...>
Date: Sat Apr 19, 2003 9:28am
Subject: 1911
How much are 1911's goin for? My instructor for CCW carried one (he was MCSO) and I really liked it!
Thx!
83043 From: DesertJeep <joey@d...>
Date: Sat Apr 19, 2003 9:36am
Subject: RE: Grade 8 hardware
Mark's Nuts and bolt.
On the east side of 67th avenue between Orangewood and Northern. It is
pretty close to 4x4 Salvage on Belmont.
They charge by the pound and have good prices and LOTS of selection. I
work near here and have been changing out all the Torks bolts which I
get from here.
Joey K
http://www.desertjeep.com
93YJ
-----Original Message-----
From: Kent Warner [mailto:KnetAZ@q...]
Sent: Saturday, April 19, 2003 9:14 AM
To: az_vjc@yahoogroups.com
Subject: [az_vjc] Grade 8 hardware
Anyone have a preference of where to get Grade 8 bolts by the box,
central Phoenix locations prefered? The parts store by the piece is
getting expensive.
Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
83044 From: DesertJeep <joey@d...>
Date: Sat Apr 19, 2003 9:38am
Subject: RE: 1911
Wrong group. You want az_vgc@yahoogroups.com.
Joey K
http://www.desertjeep.com
93YJ
-----Original Message-----
From: OneBdJeep [mailto:onebdjeep@cox.net]
Sent: Saturday, April 19, 2003 9:29 AM
To: az_vjc@yahoogroups.com
Subject: [az_vjc] 1911
How much are 1911's goin for? My instructor for CCW carried one (he was MCSO) and I really liked it!
Thx!
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
83045 From: intertwingled <intertwingled@q...>
Date: Sun Apr 20, 2003 9:56am
Subject: Re: Grade 8 hardware
Errm, out of curiosity, what is the "best" or "hardest" grade
bolt that your typical Ace Hardware would carry?
Tony
DesertJeep wrote:
> Mark's Nuts and bolt.
>
> On the east side of 67th avenue between Orangewood and Northern. It is
> pretty close to 4x4 Salvage on Belmont.
>
> They charge by the pound and have good prices and LOTS of selection. I
> work near here and have been changing out all the Torks bolts which I
> get from here.
>
> Joey K
> http://www.desertjeep.com
> 93YJ
>
> -----Original Message-----
> From: Kent Warner [mailto:KnetAZ@q...]
> Sent: Saturday, April 19, 2003 9:14 AM
> To: az_vjc@yahoogroups.com
> Subject: [az_vjc] Grade 8 hardware
>
> Anyone have a preference of where to get Grade 8 bolts by the box,
> central Phoenix locations prefered? The parts store by the piece is
> getting expensive.
>
>
>
> Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
--
Even the safest course is fraught with peril.
83046 From: Stu Olson <solson8@q...>
Date: Sat Apr 19, 2003 9:58am
Subject: RE: Grade 8 hardware
Kent,
I pick up my Grade 8 hardware at the Ace Hardware store, just north of
Glendale on 51st Ave (west side of the road, about 1 block north).
As with most Ace Hardware stores, they have a very good selection of
fasteners. Their per piece price is good because they simply break open
a box and dump it in the bin....none of this package of 3 or 4 stuff for
some ridiculous price. Of course, you can buy it buy the box as well.
I won't say they have every fastener in the world, but I've only walked
out of there one time in the past several years without the right piece
in my hand. (and that was only because they didn't have the nut I
wanted in fine thread... they were out of stock).
Stu
Stu Olson
www.stu-offroad.com
-----Original Message-----
From: Kent Warner [mailto:KnetAZ@q...]
Sent: Saturday, April 19, 2003 9:14 AM
To: az_vjc@yahoogroups.com
Subject: [az_vjc] Grade 8 hardware
Anyone have a preference of where to get Grade 8 bolts by the box,
central Phoenix locations prefered? The parts store by the piece is
getting expensive.
Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
83047 From: Stu Olson <solson8@q...>
Date: Sat Apr 19, 2003 9:59am
Subject: RE: Grade 8 hardware
Grade 8
Stu Olson
www.stu-offroad.com
-----Original Message-----
From: intertwingled [mailto:intertwingled@q...]
Sent: Sunday, April 20, 2003 9:57 AM
To: joey@d...
Cc: 'Kent Warner'; az_vjc@yahoogroups.com
Subject: Re: [az_vjc] Grade 8 hardware
Errm, out of curiosity, what is the "best" or "hardest" grade
bolt that your typical Ace Hardware would carry?
Tony
DesertJeep wrote:
> Mark's Nuts and bolt.
>
> On the east side of 67th avenue between Orangewood and Northern. It is
> pretty close to 4x4 Salvage on Belmont.
>
> They charge by the pound and have good prices and LOTS of selection. I
> work near here and have been changing out all the Torks bolts which I
> get from here.
>
> Joey K
> http://www.desertjeep.com
> 93YJ
>
> -----Original Message-----
> From: Kent Warner [mailto:KnetAZ@q...]
> Sent: Saturday, April 19, 2003 9:14 AM
> To: az_vjc@yahoogroups.com
> Subject: [az_vjc] Grade 8 hardware
>
> Anyone have a preference of where to get Grade 8 bolts by the box,
> central Phoenix locations prefered? The parts store by the piece is
> getting expensive.
>
>
>
> Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
>
>
>
> Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
--
Even the safest course is fraught with peril.
Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
83048 From: Brad <a292@a...>
Date: Sat Apr 19, 2003 10:00am
Subject: Re: Grade 8 hardware
6 Points Hardware. Just south of McDowell on the east side of
19th ave. Talk to Don and tell him Brad with Fleetwash sent you.
He'll give you a good discount. :-)
602-252-6157
--- In az_vjc@yahoogroups.com, "Kent Warner" <KnetAZ@q...>
wrote:
> Anyone have a preference of where to get Grade 8 bolts by the
box,
> central Phoenix locations prefered? The parts store by the
piece is
> getting expensive.
83049 From: ccgaiser <ccgaiser@h...>
Date: Sat Apr 19, 2003 10:49am
Subject: Re: Grade 8 hardware
I agree with Stu on the Ace Hardware selection.
If they don't have it, I think Copperstate nut and bolt would.
Good luck with it.
Chris
66 CJ-5
--- In az_vjc@yahoogroups.com, "Kent Warner" <KnetAZ@q...> wrote:
> Anyone have a preference of where to get Grade 8 bolts by the box,
> central Phoenix locations prefered? The parts store by the piece is
> getting expensive.
83050 From: Kent Warner <KnetAZ@q...>
Date: Sat Apr 19, 2003 10:53am
Subject: Metric/SAE
OK, this is going to show what a TJ newbie I am , but I am certain
that that bolt that holds the front sway bar bracket to the frame is
16mm. Are TJ's metric? I though for sure some of it was SAE. Don't
tell me there is both on here, cuz I have NO metric wrenches (CJ's
didn't need 'em).
83051 From: Jon and julie <scooby_moose@y...>
Date: Sat Apr 19, 2003 10:54am
Subject: Re: OT: Squaw Peak MTN or, Piestewa Peak?
Just a thought, but if you change the name from an offensive name
like squaw( meaning young female indian) to piestewa( a young female
indian) isnt that going to be more offensive. maybe not, but I think
her name will forever be accociated with the name squaw.
Jon
--- In az_vjc@yahoogroups.com, "k7ant" <k7ant@f...> wrote:
> Brian,
> I wasn't talking about a 5 to 1 vote. The governer asked for
peoples
> resignations and to me, IMHO, was only making political hay out of
> the whole situation. If it were my daughter, I would rather have
> waited the 5 years it was originally setup with, so no politician
> could use me and my family for furthering their clout. I saw
nothing
> wrong with Squaw Peak, and have no problem with it being named
after
> Piestewa, but lets follow the rules.
> JMHO no offense intended or taken.
> Bill W
>
> --- In az_vjc@yahoogroups.com, b h <xjnation@y...> wrote:
> > I dont see how a 5 to 1 vote can be considered
> > cramming down someones throat...
> >
> > Brian
> >
> >
> > --- k7ant <k7ant@f...> wrote:
> > > Brian,
> > > I don't think there is any problem with this. It's
> > > just the way the
> > > governer rammed it down everyone's throat,
> > > threatning to fire people
> > > and bypassing laws.
> > > Bill W
> > > --- In az_vjc@yahoogroups.com, b h <xjnation@y...>
> > > wrote:
> > > > "Piestewa and not the other fallen soldiers. What
> > > > would the other Families think?" I believe that
> > > the
> > > > other famlies dont have a problem with this
> > > >
> > > > Lori Piestewa was a mother of two, 3 and 4 year
> > > olds,
> > > > who went to fight for ideals she and we believed
> > > > in...she was from Tuba City....and I believe that
> > > > honoring the first active woman soldier to be
> > > killed
> > > > in front line action is a good thing and changing
> > > the
> > > > name from the deragatory SQUAW to an American
> > > indian
> > > > woman's name who promotes ideals of freedom and
> > > > democracy is a great idea and even better, that we
> > > too
> > > > can be proud of the American Indian heritage in
> > > our
> > > > great state. Its about time we recognized the
> > > > positives about of Native American culture and not
> > > > just the negatives...
> > > >
> > > > Brian Harmon
> > > > Flagstaff AZ
> > > >
> > > >
> > > >
> > > >
> > > > --- Joe W <arizonajeep@c...> wrote:
> > > > > MessageROTFLMAO!
> > > > > -----Original Message-----
> > > > > From: Scott Kruize [mailto:skruize@c...]
> > > > > Sent: Saturday, April 19, 2003 3:16 AM
> > > > > To: joey@d...; az_vjc@yahoogroups.com
> > > > > Subject: RE: [az_vjc] Re: OT: Squaw Peak MTN
> > > or,
> > > > > Piestewa Peak?
> > > > >
> > > > >
> > > > > Because we have some Cherokees in the group?
> > > > >
> > > > > LOL
> > > > >
> > > > > Scott K
> > > > >
> > > > >
> > > > > -----Original Message-----
> > > > > From: DesertJeep [mailto:joey@d...]
> > > > > Sent: Saturday, April 19, 2003 2:59 AM
> > > > > To: az_vjc@yahoogroups.com
> > > > > Subject: RE: [az_vjc] Re: OT: Squaw Peak MTN
> > > or,
> > > > > Piestewa Peak?
> > > > >
> > > > >
> > > > > And this has to do with Jeeps because...???
> > > > >
> > > > >
> > > > >
> > > > > Joey K
> > > > >
> > > > > http://www.desertjeep.com
> > > > >
> > > > > 93YJ
> > > > >
> > > > >
> > > > >
> > > > > -----Original Message-----
> > > > > From: chaton602phx@a...
> > > > > [mailto:chaton602phx@a...]
> > > > > Sent: Friday, April 18, 2003 9:07 PM
> > > > > To: az_vjc@yahoogroups.com
> > > > > Subject: Re: [az_vjc] Re: OT: Squaw Peak MTN
> > > or,
> > > > > Piestewa Peak?
> > > > >
> > > > >
> > > > >
> > > > > They've been wanting to rename the "Squaw peak
> > > MTN
> > > > > for quite some time
> > > > > because the Indians claim "the name Squaw peak
> > > is
> > > > > degrading to the Indian
> > > > > woman." It's been an issue for a couple of years
> > > I
> > > > > think. I, as well,
> > > > > support our living and mourn our fallen troops,
> > > and
> > > > > I agree with the rest of
> > > > > you about this ridiculous name change. if
> > > Napalitano
> > > > > wants to change any
> > > > > names in phoenix (as far as streets or roads),
> > > maybe
> > > > > she should consider
> > > > > changing "Vanburen". the city has been wanting
> > > to
> > > > > change that name as well
> > > > > with the hope to change the way that street is
> > > used
> > > > > from a negative to a
> > > > > positive. I think the name they wanted to use in
> > > the
> > > > > past was John F.
> > > > > Kennedy. I think this would be a bad move in her
> > > > > part. because it almost
> > > > > sounds and looks like she's recognizing Piestewa
> > > and
> > > > > not the other fallen
> > > > > soldiers. What would the other Families think?
> > > > > Your use of Yahoo! Groups is subject to the
> > > Yahoo!
> > > > > Terms of Service.
> > > > >
> > > > >
> > > > >
> > > > > Your use of Yahoo! Groups is subject to the
> > > Yahoo!
> > > > > Terms of Service.
> > > > >
> > > > > Your use of Yahoo! Groups is subject to the
> > > Yahoo!
> > > > > Terms of Service.
> > > > >
> > > > >
> > > >
> > > >
> > > > __________________________________________________
> > > > Do you Yahoo!?
> > > > The New Yahoo! Search - Faster. Easier. Bingo
> > > > http://search.yahoo.com
> > >
> > >
> > >
> > >
> > > Your use of Yahoo! Groups is subject to
> > > http://docs.yahoo.com/info/terms/
> > >
> > >
> >
> >
> > __________________________________________________
> > Do you Yahoo!?
> > The New Yahoo! Search - Faster. Easier. Bingo
> > http://search.yahoo.com
83052 From: Randy Davis <luvrocks@c...>
Date: Sat Apr 19, 2003 11:01am
Subject: any lawyers in the club?
i have a few ? for you,i have a problem with two people and i need to find out how to go after and what for.i got a post from a friend how was on line with a person how had a motor for sale he let me know of the motor,i then looked at the post and it read,i have a complet 94 cherokee 4.0L ho with under hood harness and computer has slight tick but runs strong ready to bolt in your jeep $600.00.so i pay the $600 and go after the motor i back in they load it up i take it home as i go to unload it from my van i notice that its not a 94 motor but its an 88 motor whitch i cant use in my jeep so i call him back and tell him its not the right motor he tells me that the junkyard must of gave them the wrong one that he would get it taking care of on monday well three weeks later and many calls between us and i still have no motor,they keep telling me that i bought an injection not a complet motor they told the junkyard to give me a injection off a newer motor so that i can put it on the motor that i have well i dont want to do that as its an 88 with god only knows how many miles it has on it.so what kind of charges do i file against adam lunn how sold the motor to me!!!TIA
83053 From: Kristi <kristiluv33@m...>
Date: Sat Apr 19, 2003 11:04am
Subject: RE: Re: Grade 8 hardware
Also if you are not in a hurry; www.gen-aircraft-hardware.com they will
send you a free 300pg catalogue and the quality is grade #8 and
higher(aviation approved) w/cadmium plating - pricing is better than
Copperstate Nut & Bolt. There is nothing you can't get.
Jason
-----Original Message-----
From: ccgaiser [mailto:ccgaiser@h...]
Sent: Saturday, April 19, 2003 10:49 AM
To: az_vjc@yahoogroups.com
Subject: [az_vjc] Re: Grade 8 hardware
I agree with Stu on the Ace Hardware selection.
If they don't have it, I think Copperstate nut and bolt would.
Good luck with it.
Chris
66 CJ-5
--- In az_vjc@yahoogroups.com, "Kent Warner" <KnetAZ@q...> wrote:
> Anyone have a preference of where to get Grade 8 bolts by the box,
> central Phoenix locations prefered? The parts store by the piece is
> getting expensive.
Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
83054 From: John DeRuiter <wm7a@m...>
Date: Sat Apr 19, 2003 11:04am
Subject: Re: Metric/SAE
Kent,
Most if not all the stock hardware on my 98 TJ is metric. A lot of the
aftermarket stuff is SAE.
John DeRuiter, WM7A
98 TJ
----- Original Message -----
From: "Kent Warner" <KnetAZ@q...>
To: <az_vjc@yahoogroups.com>
Sent: Saturday, April 19, 2003 10:53 AM
Subject: [az_vjc] Metric/SAE
> OK, this is going to show what a TJ newbie I am , but I am certain
> that that bolt that holds the front sway bar bracket to the frame is
> 16mm. Are TJ's metric? I though for sure some of it was SAE. Don't
> tell me there is both on here, cuz I have NO metric wrenches (CJ's
> didn't need 'em).
>
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
83055 From: Kent Warner <KnetAZ@q...>
Date: Sat Apr 19, 2003 11:14am
Subject: Re: Metric/SAE
OK, much confusion. Befuddlement. OUCH, I just bumped into a wall.
So, Grade 8 is an SAE standard, is the metric equivelent the 10.9
standard.
Now I gotta buy metric wrenches. And impact sockets. And deep sockets.
Expletive.
--- In az_vjc@yahoogroups.com, "John DeRuiter" <wm7a@m...> wrote:
> Kent,
>
> Most if not all the stock hardware on my 98 TJ is metric. A lot of the
> aftermarket stuff is SAE.
>
> John DeRuiter, WM7A
> 98 TJ
>
> ----- Original Message -----
> From: "Kent Warner" <KnetAZ@q...>
> To: <az_vjc@yahoogroups.com>
> Sent: Saturday, April 19, 2003 10:53 AM
> Subject: [az_vjc] Metric/SAE
>
>
> > OK, this is going to show what a TJ newbie I am , but I am certain
> > that that bolt that holds the front sway bar bracket to the frame is
> > 16mm. Are TJ's metric? I though for sure some of it was SAE. Don't
> > tell me there is both on here, cuz I have NO metric wrenches (CJ's
> > didn't need 'em).
> >
> >
> >
> >
> > Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
> >
> >
> >
83056 From: Brad <a292@a...>
Date: Sat Apr 19, 2003 11:24am
Subject: Re: Metric/SAE
Not to rub salt in the wound, but don't forget the torx bits... The
upper bolt on the rear track bar takes a T-55. You could borrow
mine if you'd like. I have from T-10 through T-55.
Brad
--- In az_vjc@yahoogroups.com, "Kent Warner" <KnetAZ@q...>
wrote:
> OK, much confusion. Befuddlement. OUCH, I just bumped
into a wall.
>
> So, Grade 8 is an SAE standard, is the metric equivelent the
10.9
> standard.
>
> Now I gotta buy metric wrenches. And impact sockets. And
deep sockets.
>
> Expletive.
>
> --- In az_vjc@yahoogroups.com, "John DeRuiter"
<wm7a@m...> wrote:
> > Kent,
> >
> > Most if not all the stock hardware on my 98 TJ is metric. A lot
of the
> > aftermarket stuff is SAE.
> >
> > John DeRuiter, WM7A
> > 98 TJ
> >
> > ----- Original Message -----
> > From: "Kent Warner" <KnetAZ@q...>
> > To: <az_vjc@yahoogroups.com>
> > Sent: Saturday, April 19, 2003 10:53 AM
> > Subject: [az_vjc] Metric/SAE
> >
> >
> > > OK, this is going to show what a TJ newbie I am , but I am
certain
> > > that that bolt that holds the front sway bar bracket to the
frame is
> > > 16mm. Are TJ's metric? I though for sure some of it was
SAE. Don't
> > > tell me there is both on here, cuz I have NO metric
wrenches (CJ's
> > > didn't need 'em).
> > >
> > >
> > >
> > >
> > > Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
> > >
> > >
> > >
83057 From: Kent Warner <KnetAZ@q...>
Date: Sat Apr 19, 2003 11:29am
Subject: Re: Metric/SAE
Thanx, but I am good on the Torx stuff, I knew that was in there. Is
Torx metric or SAE threaded? Jeez, all I wanted to do was mount my
winch............
--- In az_vjc@yahoogroups.com, "Brad" <a292@a...> wrote:
> Not to rub salt in the wound, but don't forget the torx bits... The
> upper bolt on the rear track bar takes a T-55. You could borrow
> mine if you'd like. I have from T-10 through T-55.
>
> Brad
>
> --- In az_vjc@yahoogroups.com, "Kent Warner" <KnetAZ@q...>
> wrote:
> > OK, much confusion. Befuddlement. OUCH, I just bumped
> into a wall.
> >
> > So, Grade 8 is an SAE standard, is the metric equivelent the
> 10.9
> > standard.
> >
> > Now I gotta buy metric wrenches. And impact sockets. And
> deep sockets.
> >
> > Expletive.
> >
> > --- In az_vjc@yahoogroups.com, "John DeRuiter"
> <wm7a@m...> wrote:
> > > Kent,
> > >
> > > Most if not all the stock hardware on my 98 TJ is metric. A lot
> of the
> > > aftermarket stuff is SAE.
> > >
> > > John DeRuiter, WM7A
> > > 98 TJ
> > >
> > > ----- Original Message -----
> > > From: "Kent Warner" <KnetAZ@q...>
> > > To: <az_vjc@yahoogroups.com>
> > > Sent: Saturday, April 19, 2003 10:53 AM
> > > Subject: [az_vjc] Metric/SAE
> > >
> > >
> > > > OK, this is going to show what a TJ newbie I am , but I am
> certain
> > > > that that bolt that holds the front sway bar bracket to the
> frame is
> > > > 16mm. Are TJ's metric? I though for sure some of it was
> SAE. Don't
> > > > tell me there is both on here, cuz I have NO metric
> wrenches (CJ's
> > > > didn't need 'em).
> > > >
> > > >
> > > >
> > > >
> > > > Your use of Yahoo! Groups is subject to
> > http://docs.yahoo.com/info/terms/
> > > >
> > > >
> > > >
83058 From: Brad <a292@a...>
Date: Sat Apr 19, 2003 11:40am
Subject: Re: Metric/SAE
They seem to be metric, but don't quote me on that... The one
from my rear track bar is definatly metric.
Brad
--- In az_vjc@yahoogroups.com, "Kent Warner" <KnetAZ@q...>
wrote:
> Thanx, but I am good on the Torx stuff, I knew that was in there.
Is
> Torx metric or SAE threaded? Jeez, all I wanted to do was
mount my
> winch............
>
> --- In az_vjc@yahoogroups.com, "Brad" <a292@a...> wrote:
> > Not to rub salt in the wound, but don't forget the torx bits...
The
> > upper bolt on the rear track bar takes a T-55. You could
borrow
> > mine if you'd like. I have from T-10 through T-55.
> >
> > Brad
> >
> > --- In az_vjc@yahoogroups.com, "Kent Warner"
<KnetAZ@q...>
> > wrote:
> > > OK, much confusion. Befuddlement. OUCH, I just bumped
> > into a wall.
> > >
> > > So, Grade 8 is an SAE standard, is the metric equivelent
the
> > 10.9
> > > standard.
> > >
> > > Now I gotta buy metric wrenches. And impact sockets. And
> > deep sockets.
> > >
> > > Expletive.
> > >
> > > --- In az_vjc@yahoogroups.com, "John DeRuiter"
> > <wm7a@m...> wrote:
> > > > Kent,
> > > >
> > > > Most if not all the stock hardware on my 98 TJ is metric. A
lot
> > of the
> > > > aftermarket stuff is SAE.
> > > >
> > > > John DeRuiter, WM7A
> > > > 98 TJ
> > > >
> > > > ----- Original Message -----
> > > > From: "Kent Warner" <KnetAZ@q...>
> > > > To: <az_vjc@yahoogroups.com>
> > > > Sent: Saturday, April 19, 2003 10:53 AM
> > > > Subject: [az_vjc] Metric/SAE
> > > >
> > > >
> > > > > OK, this is going to show what a TJ newbie I am , but I
am
> > certain
> > > > > that that bolt that holds the front sway bar bracket to the
> > frame is
> > > > > 16mm. Are TJ's metric? I though for sure some of it
was
> > SAE. Don't
> > > > > tell me there is both on here, cuz I have NO metric
> > wrenches (CJ's
> > > > > didn't need 'em).
> > > > >
> > > > >
> > > > >
> > > > >
> > > > > Your use of Yahoo! Groups is subject to
> > > http://docs.yahoo.com/info/terms/
> > > > >
> > > > >
> > > > >
83059 From: John DeRuiter <wm7a@m...>
Date: Sat Apr 19, 2003 11:54am
Subject: Re: Re: Metric/SAE
10.9 is about the same as grade 8. 8.8 is about a grade 5.
John DeRuiter, WM7A
98 TJ
----- Original Message -----
From: "Kent Warner" <KnetAZ@q...>
To: <az_vjc@yahoogroups.com>
Sent: Saturday, April 19, 2003 11:14 AM
Subject: [az_vjc] Re: Metric/SAE
> OK, much confusion. Befuddlement. OUCH, I just bumped into a wall.
>
> So, Grade 8 is an SAE standard, is the metric equivelent the 10.9
> standard.
>
> Now I gotta buy metric wrenches. And impact sockets. And deep sockets.
>
> Expletive.
>
> --- In az_vjc@yahoogroups.com, "John DeRuiter" <wm7a@m...> wrote:
> > Kent,
> >
> > Most if not all the stock hardware on my 98 TJ is metric. A lot of the
> > aftermarket stuff is SAE.
> >
> > John DeRuiter, WM7A
> > 98 TJ
> >
> > ----- Original Message -----
> > From: "Kent Warner" <KnetAZ@q...>
> > To: <az_vjc@yahoogroups.com>
> > Sent: Saturday, April 19, 2003 10:53 AM
> > Subject: [az_vjc] Metric/SAE
> >
> >
> > > OK, this is going to show what a TJ newbie I am , but I am certain
> > > that that bolt that holds the front sway bar bracket to the frame is
> > > 16mm. Are TJ's metric? I though for sure some of it was SAE. Don't
> > > tell me there is both on here, cuz I have NO metric wrenches (CJ's
> > > didn't need 'em).
> > >
> > >
> > >
> > >
> > > Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
> > >
> > >
> > >
>
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
83060 From: DesertJeep <joey@d...>
Date: Sat Apr 19, 2003 11:58am
Subject: RE: Grade 8 hardware
Stu,
On a Saturday I agree. But during the weekday Mark's. If you haven't
been there for a nut or bolt you got to check it out. Grade 8 or 5, zinc
or stainless steel, even galvanized. He has a very large collection. The
thing I like about Mark's is that you can browse the bolts whereas at
Copper State you have to pretty much know what you want. You know how
Ace has one isle of nuts and bolts... multiply that by 10 or 15.
Like I said you should check it out next time you need a nut or bolt.
Joey K
http://www.desertjeep.com
93YJ
-----Original Message-----
From: Stu Olson [mailto:solson8@q...]
Sent: Saturday, April 19, 2003 9:58 AM
To: 'Kent Warner'; az_vjc@yahoogroups.com
Subject: RE: [az_vjc] Grade 8 hardware
Kent,
I pick up my Grade 8 hardware at the Ace Hardware store, just north of
Glendale on 51st Ave (west side of the road, about 1 block north).
As with most Ace Hardware stores, they have a very good selection of
fasteners. Their per piece price is good because they simply break open
a box and dump it in the bin....none of this package of 3 or 4 stuff for
some ridiculous price. Of course, you can buy it buy the box as well.
I won't say they have every fastener in the world, but I've only walked
out of there one time in the past several years without the right piece
in my hand. (and that was only because they didn't have the nut I
wanted in fine thread... they were out of stock).
Stu
Stu Olson
www.stu-offroad.com
-----Original Message-----
From: Kent Warner [mailto:KnetAZ@q...]
Sent: Saturday, April 19, 2003 9:14 AM
To: az_vjc@yahoogroups.com
Subject: [az_vjc] Grade 8 hardware
Anyone have a preference of where to get Grade 8 bolts by the box,
central Phoenix locations prefered? The parts store by the piece is
getting expensive.
Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
83061 From: leonardpennock <leonardpennock@c...>
Date: Sat Apr 19, 2003 0:09pm
Subject: Re: any lawyers in the club?
Have you thought about just using Small Claims Court? No lawyers
allowed. If you have a physical copy of the ad it sounds like you
have a pretty good case.
--- In az_vjc@yahoogroups.com, "Randy Davis" <luvrocks@c...> wrote:
> i have a few ? for you,i have a problem with two people and i need
to find out how to go after and what for.i got a post from a friend
how was on line with a person how had a motor for sale he let me know
of the motor,i then looked at the post and it read,i have a complet 94
cherokee 4.0L ho with under hood harness and computer has slight tick
but runs strong ready to bolt in your jeep $600.00.so i pay the $600
and go after the motor i back in they load it up i take it home as i
go to unload it from my van i notice that its not a 94 motor but its
an 88 motor whitch i cant use in my jeep so i call him back and tell
him its not the right motor he tells me that the junkyard must of gave
them the wrong one that he would get it taking care of on monday well
three weeks later and many calls between us and i still have no
motor,they keep telling me that i bought an injection not a complet
motor they told the junkyard to give me a injection off a newer motor
so that i can put it on the motor that i have well i dont want to do
that as its an 88 with god only knows how many miles it has on it.so
what kind of charges do i file against adam lunn how sold the motor to
me!!!TIA
83062 From: James Rogers <skijunkie@c...>
Date: Sat Apr 19, 2003 0:47pm
Subject: RE: Re: OT: Squaw Peak MTN or, Piestewa Peak?
> -----Original Message-----
> From: b h [mailto:xjnation@y...]
> Sent: Saturday, April 19, 2003 7:52 AM
> To: k7ant; az_vjc@yahoogroups.com
> Subject: Re: [az_vjc] Re: OT: Squaw Peak MTN or, Piestewa Peak?
>
>
> I dont see how a 5 to 1 vote can be considered
> cramming down someones throat...
With the state of the economy and our current budget crisis, I wonder how
much is this name change costing us? Those in the public services are going
without (EMS/Fire/Police)... county employees have gone two years without a
cost of living increase never mind a real raise, including the people on the
street enforcing the laws, the people doing criminal investigations, and the
people working in the jails keeping criminals off the streets. The people
in the medical examiners office do an insane average of 400 autopsies per
year per employee, yet are some of the lowest paid in the country. Why are
we wasting money on a name change?
83063 From: k7ant <k7ant@f...>
Date: Sat Apr 19, 2003 0:46pm
Subject: Re: Metric/SAE
Guess what? You need to go buy some metrics. The jeep is both SAE and
Metric with no rhime or reason.
Bill W
--- In az_vjc@yahoogroups.com, "Kent Warner" <KnetAZ@q...> wrote:
> OK, this is going to show what a TJ newbie I am , but I am certain
> that that bolt that holds the front sway bar bracket to the frame is
> 16mm. Are TJ's metric? I though for sure some of it was SAE.
Don't
> tell me there is both on here, cuz I have NO metric wrenches (CJ's
> didn't need 'em).
83064 From: Rick Norman <4x4xfun1@c...>
Date: Sat Apr 19, 2003 1:01pm
Subject: Need some tubing bent............
I am building new steering for my XJ from 1.25 DOM. I need to have a 10 degree bend in my track bar, and (2) 5 degree bends in my tie rod. Anyone out there with a bender that can do this for me real quick, this weekend, if possible. Duffy, maybe??
I can pay in beer or cash for your time :)
Rick 602-430-5638
Got Groceries?
83065 From: AzVJC Website <azvjc@a...>
Date: Sat Apr 19, 2003 1:15pm
Subject: [TR] Unspecified - Wednesday, June 25, 2003
Hello All,
Bob Lynn is leading an Unspecified trail run on Wednesday, June 25, 2003.
When:
Where:
Rating: None
Length:
CB Channel:
Click Here To Add Your Name to the Sign Up List
Thank You,
- The AzVJC Website
83041 From: intertwingled <intertwingled@q...>
Date: Sun Apr 20, 2003 9:29am
Subject: Re: [OT][FS] Twin size reclining/massage/heat/ bed
What's your sleep number, Joe? =P
Joe W wrote:
> I have a virtually new twin size bed complete with mattress, box springs,
> and the base which:
>
> Elevates head.
> Elevates feet.
> Multiple vibration settings.
> Heat.
>
> and comes with a remote controller.
>
> This would make a GREAT bed for someone's nice garage. <grin>
>
> Sell or trade for ???
>
> Reply via email.
>
> Joe West
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
--
Even the safest course is fraught with peril.
--------------------------------------------------------------------------------
ADVERTISEMENT
83042 From: OneBdJeep <onebdjeep@c...>
Date: Sat Apr 19, 2003 9:28am
Subject: 1911
How much are 1911's goin for? My instructor for CCW carried one (he was MCSO) and I really liked it!
Thx!
83043 From: DesertJeep <joey@d...>
Date: Sat Apr 19, 2003 9:36am
Subject: RE: Grade 8 hardware
Mark's Nuts and bolt.
On the east side of 67th avenue between Orangewood and Northern. It is
pretty close to 4x4 Salvage on Belmont.
They charge by the pound and have good prices and LOTS of selection. I
work near here and have been changing out all the Torks bolts which I
get from here.
Joey K
http://www.desertjeep.com
93YJ
-----Original Message-----
From: Kent Warner [mailto:KnetAZ@q...]
Sent: Saturday, April 19, 2003 9:14 AM
To: az_vjc@yahoogroups.com
Subject: [az_vjc] Grade 8 hardware
Anyone have a preference of where to get Grade 8 bolts by the box,
central Phoenix locations prefered? The parts store by the piece is
getting expensive.
Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
83044 From: DesertJeep <joey@d...>
Date: Sat Apr 19, 2003 9:38am
Subject: RE: 1911
Wrong group. You want az_vgc@yahoogroups.com.
Joey K
http://www.desertjeep.com
93YJ
-----Original Message-----
From: OneBdJeep [mailto:onebdjeep@cox.net]
Sent: Saturday, April 19, 2003 9:29 AM
To: az_vjc@yahoogroups.com
Subject: [az_vjc] 1911
How much are 1911's goin for? My instructor for CCW carried one (he was MCSO) and I really liked it!
Thx!
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
83045 From: intertwingled <intertwingled@q...>
Date: Sun Apr 20, 2003 9:56am
Subject: Re: Grade 8 hardware
Errm, out of curiosity, what is the "best" or "hardest" grade
bolt that your typical Ace Hardware would carry?
Tony
DesertJeep wrote:
> Mark's Nuts and bolt.
>
> On the east side of 67th avenue between Orangewood and Northern. It is
> pretty close to 4x4 Salvage on Belmont.
>
> They charge by the pound and have good prices and LOTS of selection. I
> work near here and have been changing out all the Torks bolts which I
> get from here.
>
> Joey K
> http://www.desertjeep.com
> 93YJ
>
> -----Original Message-----
> From: Kent Warner [mailto:KnetAZ@q...]
> Sent: Saturday, April 19, 2003 9:14 AM
> To: az_vjc@yahoogroups.com
> Subject: [az_vjc] Grade 8 hardware
>
> Anyone have a preference of where to get Grade 8 bolts by the box,
> central Phoenix locations prefered? The parts store by the piece is
> getting expensive.
>
>
>
> Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
--
Even the safest course is fraught with peril.
83046 From: Stu Olson <solson8@q...>
Date: Sat Apr 19, 2003 9:58am
Subject: RE: Grade 8 hardware
Kent,
I pick up my Grade 8 hardware at the Ace Hardware store, just north of
Glendale on 51st Ave (west side of the road, about 1 block north).
As with most Ace Hardware stores, they have a very good selection of
fasteners. Their per piece price is good because they simply break open
a box and dump it in the bin....none of this package of 3 or 4 stuff for
some ridiculous price. Of course, you can buy it buy the box as well.
I won't say they have every fastener in the world, but I've only walked
out of there one time in the past several years without the right piece
in my hand. (and that was only because they didn't have the nut I
wanted in fine thread... they were out of stock).
Stu
Stu Olson
www.stu-offroad.com
-----Original Message-----
From: Kent Warner [mailto:KnetAZ@q...]
Sent: Saturday, April 19, 2003 9:14 AM
To: az_vjc@yahoogroups.com
Subject: [az_vjc] Grade 8 hardware
Anyone have a preference of where to get Grade 8 bolts by the box,
central Phoenix locations prefered? The parts store by the piece is
getting expensive.
Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
83047 From: Stu Olson <solson8@q...>
Date: Sat Apr 19, 2003 9:59am
Subject: RE: Grade 8 hardware
Grade 8
Stu Olson
www.stu-offroad.com
-----Original Message-----
From: intertwingled [mailto:intertwingled@q...]
Sent: Sunday, April 20, 2003 9:57 AM
To: joey@d...
Cc: 'Kent Warner'; az_vjc@yahoogroups.com
Subject: Re: [az_vjc] Grade 8 hardware
Errm, out of curiosity, what is the "best" or "hardest" grade
bolt that your typical Ace Hardware would carry?
Tony
DesertJeep wrote:
> Mark's Nuts and bolt.
>
> On the east side of 67th avenue between Orangewood and Northern. It is
> pretty close to 4x4 Salvage on Belmont.
>
> They charge by the pound and have good prices and LOTS of selection. I
> work near here and have been changing out all the Torks bolts which I
> get from here.
>
> Joey K
> http://www.desertjeep.com
> 93YJ
>
> -----Original Message-----
> From: Kent Warner [mailto:KnetAZ@q...]
> Sent: Saturday, April 19, 2003 9:14 AM
> To: az_vjc@yahoogroups.com
> Subject: [az_vjc] Grade 8 hardware
>
> Anyone have a preference of where to get Grade 8 bolts by the box,
> central Phoenix locations prefered? The parts store by the piece is
> getting expensive.
>
>
>
> Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
>
>
>
> Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
--
Even the safest course is fraught with peril.
Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
83048 From: Brad <a292@a...>
Date: Sat Apr 19, 2003 10:00am
Subject: Re: Grade 8 hardware
6 Points Hardware. Just south of McDowell on the east side of
19th ave. Talk to Don and tell him Brad with Fleetwash sent you.
He'll give you a good discount. :-)
602-252-6157
--- In az_vjc@yahoogroups.com, "Kent Warner" <KnetAZ@q...>
wrote:
> Anyone have a preference of where to get Grade 8 bolts by the
box,
> central Phoenix locations prefered? The parts store by the
piece is
> getting expensive.
83049 From: ccgaiser <ccgaiser@h...>
Date: Sat Apr 19, 2003 10:49am
Subject: Re: Grade 8 hardware
I agree with Stu on the Ace Hardware selection.
If they don't have it, I think Copperstate nut and bolt would.
Good luck with it.
Chris
66 CJ-5
--- In az_vjc@yahoogroups.com, "Kent Warner" <KnetAZ@q...> wrote:
> Anyone have a preference of where to get Grade 8 bolts by the box,
> central Phoenix locations prefered? The parts store by the piece is
> getting expensive.
83050 From: Kent Warner <KnetAZ@q...>
Date: Sat Apr 19, 2003 10:53am
Subject: Metric/SAE
OK, this is going to show what a TJ newbie I am , but I am certain
that that bolt that holds the front sway bar bracket to the frame is
16mm. Are TJ's metric? I though for sure some of it was SAE. Don't
tell me there is both on here, cuz I have NO metric wrenches (CJ's
didn't need 'em).
83051 From: Jon and julie <scooby_moose@y...>
Date: Sat Apr 19, 2003 10:54am
Subject: Re: OT: Squaw Peak MTN or, Piestewa Peak?
Just a thought, but if you change the name from an offensive name
like squaw( meaning young female indian) to piestewa( a young female
indian) isnt that going to be more offensive. maybe not, but I think
her name will forever be accociated with the name squaw.
Jon
--- In az_vjc@yahoogroups.com, "k7ant" <k7ant@f...> wrote:
> Brian,
> I wasn't talking about a 5 to 1 vote. The governer asked for
peoples
> resignations and to me, IMHO, was only making political hay out of
> the whole situation. If it were my daughter, I would rather have
> waited the 5 years it was originally setup with, so no politician
> could use me and my family for furthering their clout. I saw
nothing
> wrong with Squaw Peak, and have no problem with it being named
after
> Piestewa, but lets follow the rules.
> JMHO no offense intended or taken.
> Bill W
>
> --- In az_vjc@yahoogroups.com, b h <xjnation@y...> wrote:
> > I dont see how a 5 to 1 vote can be considered
> > cramming down someones throat...
> >
> > Brian
> >
> >
> > --- k7ant <k7ant@f...> wrote:
> > > Brian,
> > > I don't think there is any problem with this. It's
> > > just the way the
> > > governer rammed it down everyone's throat,
> > > threatning to fire people
> > > and bypassing laws.
> > > Bill W
> > > --- In az_vjc@yahoogroups.com, b h <xjnation@y...>
> > > wrote:
> > > > "Piestewa and not the other fallen soldiers. What
> > > > would the other Families think?" I believe that
> > > the
> > > > other famlies dont have a problem with this
> > > >
> > > > Lori Piestewa was a mother of two, 3 and 4 year
> > > olds,
> > > > who went to fight for ideals she and we believed
> > > > in...she was from Tuba City....and I believe that
> > > > honoring the first active woman soldier to be
> > > killed
> > > > in front line action is a good thing and changing
> > > the
> > > > name from the deragatory SQUAW to an American
> > > indian
> > > > woman's name who promotes ideals of freedom and
> > > > democracy is a great idea and even better, that we
> > > too
> > > > can be proud of the American Indian heritage in
> > > our
> > > > great state. Its about time we recognized the
> > > > positives about of Native American culture and not
> > > > just the negatives...
> > > >
> > > > Brian Harmon
> > > > Flagstaff AZ
> > > >
> > > >
> > > >
> > > >
> > > > --- Joe W <arizonajeep@c...> wrote:
> > > > > MessageROTFLMAO!
> > > > > -----Original Message-----
> > > > > From: Scott Kruize [mailto:skruize@c...]
> > > > > Sent: Saturday, April 19, 2003 3:16 AM
> > > > > To: joey@d...; az_vjc@yahoogroups.com
> > > > > Subject: RE: [az_vjc] Re: OT: Squaw Peak MTN
> > > or,
> > > > > Piestewa Peak?
> > > > >
> > > > >
> > > > > Because we have some Cherokees in the group?
> > > > >
> > > > > LOL
> > > > >
> > > > > Scott K
> > > > >
> > > > >
> > > > > -----Original Message-----
> > > > > From: DesertJeep [mailto:joey@d...]
> > > > > Sent: Saturday, April 19, 2003 2:59 AM
> > > > > To: az_vjc@yahoogroups.com
> > > > > Subject: RE: [az_vjc] Re: OT: Squaw Peak MTN
> > > or,
> > > > > Piestewa Peak?
> > > > >
> > > > >
> > > > > And this has to do with Jeeps because...???
> > > > >
> > > > >
> > > > >
> > > > > Joey K
> > > > >
> > > > > http://www.desertjeep.com
> > > > >
> > > > > 93YJ
> > > > >
> > > > >
> > > > >
> > > > > -----Original Message-----
> > > > > From: chaton602phx@a...
> > > > > [mailto:chaton602phx@a...]
> > > > > Sent: Friday, April 18, 2003 9:07 PM
> > > > > To: az_vjc@yahoogroups.com
> > > > > Subject: Re: [az_vjc] Re: OT: Squaw Peak MTN
> > > or,
> > > > > Piestewa Peak?
> > > > >
> > > > >
> > > > >
> > > > > They've been wanting to rename the "Squaw peak
> > > MTN
> > > > > for quite some time
> > > > > because the Indians claim "the name Squaw peak
> > > is
> > > > > degrading to the Indian
> > > > > woman." It's been an issue for a couple of years
> > > I
> > > > > think. I, as well,
> > > > > support our living and mourn our fallen troops,
> > > and
> > > > > I agree with the rest of
> > > > > you about this ridiculous name change. if
> > > Napalitano
> > > > > wants to change any
> > > > > names in phoenix (as far as streets or roads),
> > > maybe
> > > > > she should consider
> > > > > changing "Vanburen". the city has been wanting
> > > to
> > > > > change that name as well
> > > > > with the hope to change the way that street is
> > > used
> > > > > from a negative to a
> > > > > positive. I think the name they wanted to use in
> > > the
> > > > > past was John F.
> > > > > Kennedy. I think this would be a bad move in her
> > > > > part. because it almost
> > > > > sounds and looks like she's recognizing Piestewa
> > > and
> > > > > not the other fallen
> > > > > soldiers. What would the other Families think?
> > > > > Your use of Yahoo! Groups is subject to the
> > > Yahoo!
> > > > > Terms of Service.
> > > > >
> > > > >
> > > > >
> > > > > Your use of Yahoo! Groups is subject to the
> > > Yahoo!
> > > > > Terms of Service.
> > > > >
> > > > > Your use of Yahoo! Groups is subject to the
> > > Yahoo!
> > > > > Terms of Service.
> > > > >
> > > > >
> > > >
> > > >
> > > > __________________________________________________
> > > > Do you Yahoo!?
> > > > The New Yahoo! Search - Faster. Easier. Bingo
> > > > http://search.yahoo.com
> > >
> > >
> > >
> > >
> > > Your use of Yahoo! Groups is subject to
> > > http://docs.yahoo.com/info/terms/
> > >
> > >
> >
> >
> > __________________________________________________
> > Do you Yahoo!?
> > The New Yahoo! Search - Faster. Easier. Bingo
> > http://search.yahoo.com
83052 From: Randy Davis <luvrocks@c...>
Date: Sat Apr 19, 2003 11:01am
Subject: any lawyers in the club?
i have a few ? for you,i have a problem with two people and i need to find out how to go after and what for.i got a post from a friend how was on line with a person how had a motor for sale he let me know of the motor,i then looked at the post and it read,i have a complet 94 cherokee 4.0L ho with under hood harness and computer has slight tick but runs strong ready to bolt in your jeep $600.00.so i pay the $600 and go after the motor i back in they load it up i take it home as i go to unload it from my van i notice that its not a 94 motor but its an 88 motor whitch i cant use in my jeep so i call him back and tell him its not the right motor he tells me that the junkyard must of gave them the wrong one that he would get it taking care of on monday well three weeks later and many calls between us and i still have no motor,they keep telling me that i bought an injection not a complet motor they told the junkyard to give me a injection off a newer motor so that i can put it on the motor that i have well i dont want to do that as its an 88 with god only knows how many miles it has on it.so what kind of charges do i file against adam lunn how sold the motor to me!!!TIA
83053 From: Kristi <kristiluv33@m...>
Date: Sat Apr 19, 2003 11:04am
Subject: RE: Re: Grade 8 hardware
Also if you are not in a hurry; www.gen-aircraft-hardware.com they will
send you a free 300pg catalogue and the quality is grade #8 and
higher(aviation approved) w/cadmium plating - pricing is better than
Copperstate Nut & Bolt. There is nothing you can't get.
Jason
-----Original Message-----
From: ccgaiser [mailto:ccgaiser@h...]
Sent: Saturday, April 19, 2003 10:49 AM
To: az_vjc@yahoogroups.com
Subject: [az_vjc] Re: Grade 8 hardware
I agree with Stu on the Ace Hardware selection.
If they don't have it, I think Copperstate nut and bolt would.
Good luck with it.
Chris
66 CJ-5
--- In az_vjc@yahoogroups.com, "Kent Warner" <KnetAZ@q...> wrote:
> Anyone have a preference of where to get Grade 8 bolts by the box,
> central Phoenix locations prefered? The parts store by the piece is
> getting expensive.
Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
83054 From: John DeRuiter <wm7a@m...>
Date: Sat Apr 19, 2003 11:04am
Subject: Re: Metric/SAE
Kent,
Most if not all the stock hardware on my 98 TJ is metric. A lot of the
aftermarket stuff is SAE.
John DeRuiter, WM7A
98 TJ
----- Original Message -----
From: "Kent Warner" <KnetAZ@q...>
To: <az_vjc@yahoogroups.com>
Sent: Saturday, April 19, 2003 10:53 AM
Subject: [az_vjc] Metric/SAE
> OK, this is going to show what a TJ newbie I am , but I am certain
> that that bolt that holds the front sway bar bracket to the frame is
> 16mm. Are TJ's metric? I though for sure some of it was SAE. Don't
> tell me there is both on here, cuz I have NO metric wrenches (CJ's
> didn't need 'em).
>
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
83055 From: Kent Warner <KnetAZ@q...>
Date: Sat Apr 19, 2003 11:14am
Subject: Re: Metric/SAE
OK, much confusion. Befuddlement. OUCH, I just bumped into a wall.
So, Grade 8 is an SAE standard, is the metric equivelent the 10.9
standard.
Now I gotta buy metric wrenches. And impact sockets. And deep sockets.
Expletive.
--- In az_vjc@yahoogroups.com, "John DeRuiter" <wm7a@m...> wrote:
> Kent,
>
> Most if not all the stock hardware on my 98 TJ is metric. A lot of the
> aftermarket stuff is SAE.
>
> John DeRuiter, WM7A
> 98 TJ
>
> ----- Original Message -----
> From: "Kent Warner" <KnetAZ@q...>
> To: <az_vjc@yahoogroups.com>
> Sent: Saturday, April 19, 2003 10:53 AM
> Subject: [az_vjc] Metric/SAE
>
>
> > OK, this is going to show what a TJ newbie I am , but I am certain
> > that that bolt that holds the front sway bar bracket to the frame is
> > 16mm. Are TJ's metric? I though for sure some of it was SAE. Don't
> > tell me there is both on here, cuz I have NO metric wrenches (CJ's
> > didn't need 'em).
> >
> >
> >
> >
> > Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
> >
> >
> >
83056 From: Brad <a292@a...>
Date: Sat Apr 19, 2003 11:24am
Subject: Re: Metric/SAE
Not to rub salt in the wound, but don't forget the torx bits... The
upper bolt on the rear track bar takes a T-55. You could borrow
mine if you'd like. I have from T-10 through T-55.
Brad
--- In az_vjc@yahoogroups.com, "Kent Warner" <KnetAZ@q...>
wrote:
> OK, much confusion. Befuddlement. OUCH, I just bumped
into a wall.
>
> So, Grade 8 is an SAE standard, is the metric equivelent the
10.9
> standard.
>
> Now I gotta buy metric wrenches. And impact sockets. And
deep sockets.
>
> Expletive.
>
> --- In az_vjc@yahoogroups.com, "John DeRuiter"
<wm7a@m...> wrote:
> > Kent,
> >
> > Most if not all the stock hardware on my 98 TJ is metric. A lot
of the
> > aftermarket stuff is SAE.
> >
> > John DeRuiter, WM7A
> > 98 TJ
> >
> > ----- Original Message -----
> > From: "Kent Warner" <KnetAZ@q...>
> > To: <az_vjc@yahoogroups.com>
> > Sent: Saturday, April 19, 2003 10:53 AM
> > Subject: [az_vjc] Metric/SAE
> >
> >
> > > OK, this is going to show what a TJ newbie I am , but I am
certain
> > > that that bolt that holds the front sway bar bracket to the
frame is
> > > 16mm. Are TJ's metric? I though for sure some of it was
SAE. Don't
> > > tell me there is both on here, cuz I have NO metric
wrenches (CJ's
> > > didn't need 'em).
> > >
> > >
> > >
> > >
> > > Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
> > >
> > >
> > >
83057 From: Kent Warner <KnetAZ@q...>
Date: Sat Apr 19, 2003 11:29am
Subject: Re: Metric/SAE
Thanx, but I am good on the Torx stuff, I knew that was in there. Is
Torx metric or SAE threaded? Jeez, all I wanted to do was mount my
winch............
--- In az_vjc@yahoogroups.com, "Brad" <a292@a...> wrote:
> Not to rub salt in the wound, but don't forget the torx bits... The
> upper bolt on the rear track bar takes a T-55. You could borrow
> mine if you'd like. I have from T-10 through T-55.
>
> Brad
>
> --- In az_vjc@yahoogroups.com, "Kent Warner" <KnetAZ@q...>
> wrote:
> > OK, much confusion. Befuddlement. OUCH, I just bumped
> into a wall.
> >
> > So, Grade 8 is an SAE standard, is the metric equivelent the
> 10.9
> > standard.
> >
> > Now I gotta buy metric wrenches. And impact sockets. And
> deep sockets.
> >
> > Expletive.
> >
> > --- In az_vjc@yahoogroups.com, "John DeRuiter"
> <wm7a@m...> wrote:
> > > Kent,
> > >
> > > Most if not all the stock hardware on my 98 TJ is metric. A lot
> of the
> > > aftermarket stuff is SAE.
> > >
> > > John DeRuiter, WM7A
> > > 98 TJ
> > >
> > > ----- Original Message -----
> > > From: "Kent Warner" <KnetAZ@q...>
> > > To: <az_vjc@yahoogroups.com>
> > > Sent: Saturday, April 19, 2003 10:53 AM
> > > Subject: [az_vjc] Metric/SAE
> > >
> > >
> > > > OK, this is going to show what a TJ newbie I am , but I am
> certain
> > > > that that bolt that holds the front sway bar bracket to the
> frame is
> > > > 16mm. Are TJ's metric? I though for sure some of it was
> SAE. Don't
> > > > tell me there is both on here, cuz I have NO metric
> wrenches (CJ's
> > > > didn't need 'em).
> > > >
> > > >
> > > >
> > > >
> > > > Your use of Yahoo! Groups is subject to
> > http://docs.yahoo.com/info/terms/
> > > >
> > > >
> > > >
83058 From: Brad <a292@a...>
Date: Sat Apr 19, 2003 11:40am
Subject: Re: Metric/SAE
They seem to be metric, but don't quote me on that... The one
from my rear track bar is definatly metric.
Brad
--- In az_vjc@yahoogroups.com, "Kent Warner" <KnetAZ@q...>
wrote:
> Thanx, but I am good on the Torx stuff, I knew that was in there.
Is
> Torx metric or SAE threaded? Jeez, all I wanted to do was
mount my
> winch............
>
> --- In az_vjc@yahoogroups.com, "Brad" <a292@a...> wrote:
> > Not to rub salt in the wound, but don't forget the torx bits...
The
> > upper bolt on the rear track bar takes a T-55. You could
borrow
> > mine if you'd like. I have from T-10 through T-55.
> >
> > Brad
> >
> > --- In az_vjc@yahoogroups.com, "Kent Warner"
<KnetAZ@q...>
> > wrote:
> > > OK, much confusion. Befuddlement. OUCH, I just bumped
> > into a wall.
> > >
> > > So, Grade 8 is an SAE standard, is the metric equivelent
the
> > 10.9
> > > standard.
> > >
> > > Now I gotta buy metric wrenches. And impact sockets. And
> > deep sockets.
> > >
> > > Expletive.
> > >
> > > --- In az_vjc@yahoogroups.com, "John DeRuiter"
> > <wm7a@m...> wrote:
> > > > Kent,
> > > >
> > > > Most if not all the stock hardware on my 98 TJ is metric. A
lot
> > of the
> > > > aftermarket stuff is SAE.
> > > >
> > > > John DeRuiter, WM7A
> > > > 98 TJ
> > > >
> > > > ----- Original Message -----
> > > > From: "Kent Warner" <KnetAZ@q...>
> > > > To: <az_vjc@yahoogroups.com>
> > > > Sent: Saturday, April 19, 2003 10:53 AM
> > > > Subject: [az_vjc] Metric/SAE
> > > >
> > > >
> > > > > OK, this is going to show what a TJ newbie I am , but I
am
> > certain
> > > > > that that bolt that holds the front sway bar bracket to the
> > frame is
> > > > > 16mm. Are TJ's metric? I though for sure some of it
was
> > SAE. Don't
> > > > > tell me there is both on here, cuz I have NO metric
> > wrenches (CJ's
> > > > > didn't need 'em).
> > > > >
> > > > >
> > > > >
> > > > >
> > > > > Your use of Yahoo! Groups is subject to
> > > http://docs.yahoo.com/info/terms/
> > > > >
> > > > >
> > > > >
83059 From: John DeRuiter <wm7a@m...>
Date: Sat Apr 19, 2003 11:54am
Subject: Re: Re: Metric/SAE
10.9 is about the same as grade 8. 8.8 is about a grade 5.
John DeRuiter, WM7A
98 TJ
----- Original Message -----
From: "Kent Warner" <KnetAZ@q...>
To: <az_vjc@yahoogroups.com>
Sent: Saturday, April 19, 2003 11:14 AM
Subject: [az_vjc] Re: Metric/SAE
> OK, much confusion. Befuddlement. OUCH, I just bumped into a wall.
>
> So, Grade 8 is an SAE standard, is the metric equivelent the 10.9
> standard.
>
> Now I gotta buy metric wrenches. And impact sockets. And deep sockets.
>
> Expletive.
>
> --- In az_vjc@yahoogroups.com, "John DeRuiter" <wm7a@m...> wrote:
> > Kent,
> >
> > Most if not all the stock hardware on my 98 TJ is metric. A lot of the
> > aftermarket stuff is SAE.
> >
> > John DeRuiter, WM7A
> > 98 TJ
> >
> > ----- Original Message -----
> > From: "Kent Warner" <KnetAZ@q...>
> > To: <az_vjc@yahoogroups.com>
> > Sent: Saturday, April 19, 2003 10:53 AM
> > Subject: [az_vjc] Metric/SAE
> >
> >
> > > OK, this is going to show what a TJ newbie I am , but I am certain
> > > that that bolt that holds the front sway bar bracket to the frame is
> > > 16mm. Are TJ's metric? I though for sure some of it was SAE. Don't
> > > tell me there is both on here, cuz I have NO metric wrenches (CJ's
> > > didn't need 'em).
> > >
> > >
> > >
> > >
> > > Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
> > >
> > >
> > >
>
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
83060 From: DesertJeep <joey@d...>
Date: Sat Apr 19, 2003 11:58am
Subject: RE: Grade 8 hardware
Stu,
On a Saturday I agree. But during the weekday Mark's. If you haven't
been there for a nut or bolt you got to check it out. Grade 8 or 5, zinc
or stainless steel, even galvanized. He has a very large collection. The
thing I like about Mark's is that you can browse the bolts whereas at
Copper State you have to pretty much know what you want. You know how
Ace has one isle of nuts and bolts... multiply that by 10 or 15.
Like I said you should check it out next time you need a nut or bolt.
Joey K
http://www.desertjeep.com
93YJ
-----Original Message-----
From: Stu Olson [mailto:solson8@q...]
Sent: Saturday, April 19, 2003 9:58 AM
To: 'Kent Warner'; az_vjc@yahoogroups.com
Subject: RE: [az_vjc] Grade 8 hardware
Kent,
I pick up my Grade 8 hardware at the Ace Hardware store, just north of
Glendale on 51st Ave (west side of the road, about 1 block north).
As with most Ace Hardware stores, they have a very good selection of
fasteners. Their per piece price is good because they simply break open
a box and dump it in the bin....none of this package of 3 or 4 stuff for
some ridiculous price. Of course, you can buy it buy the box as well.
I won't say they have every fastener in the world, but I've only walked
out of there one time in the past several years without the right piece
in my hand. (and that was only because they didn't have the nut I
wanted in fine thread... they were out of stock).
Stu
Stu Olson
www.stu-offroad.com
-----Original Message-----
From: Kent Warner [mailto:KnetAZ@q...]
Sent: Saturday, April 19, 2003 9:14 AM
To: az_vjc@yahoogroups.com
Subject: [az_vjc] Grade 8 hardware
Anyone have a preference of where to get Grade 8 bolts by the box,
central Phoenix locations prefered? The parts store by the piece is
getting expensive.
Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
83061 From: leonardpennock <leonardpennock@c...>
Date: Sat Apr 19, 2003 0:09pm
Subject: Re: any lawyers in the club?
Have you thought about just using Small Claims Court? No lawyers
allowed. If you have a physical copy of the ad it sounds like you
have a pretty good case.
--- In az_vjc@yahoogroups.com, "Randy Davis" <luvrocks@c...> wrote:
> i have a few ? for you,i have a problem with two people and i need
to find out how to go after and what for.i got a post from a friend
how was on line with a person how had a motor for sale he let me know
of the motor,i then looked at the post and it read,i have a complet 94
cherokee 4.0L ho with under hood harness and computer has slight tick
but runs strong ready to bolt in your jeep $600.00.so i pay the $600
and go after the motor i back in they load it up i take it home as i
go to unload it from my van i notice that its not a 94 motor but its
an 88 motor whitch i cant use in my jeep so i call him back and tell
him its not the right motor he tells me that the junkyard must of gave
them the wrong one that he would get it taking care of on monday well
three weeks later and many calls between us and i still have no
motor,they keep telling me that i bought an injection not a complet
motor they told the junkyard to give me a injection off a newer motor
so that i can put it on the motor that i have well i dont want to do
that as its an 88 with god only knows how many miles it has on it.so
what kind of charges do i file against adam lunn how sold the motor to
me!!!TIA
83062 From: James Rogers <skijunkie@c...>
Date: Sat Apr 19, 2003 0:47pm
Subject: RE: Re: OT: Squaw Peak MTN or, Piestewa Peak?
> -----Original Message-----
> From: b h [mailto:xjnation@y...]
> Sent: Saturday, April 19, 2003 7:52 AM
> To: k7ant; az_vjc@yahoogroups.com
> Subject: Re: [az_vjc] Re: OT: Squaw Peak MTN or, Piestewa Peak?
>
>
> I dont see how a 5 to 1 vote can be considered
> cramming down someones throat...
With the state of the economy and our current budget crisis, I wonder how
much is this name change costing us? Those in the public services are going
without (EMS/Fire/Police)... county employees have gone two years without a
cost of living increase never mind a real raise, including the people on the
street enforcing the laws, the people doing criminal investigations, and the
people working in the jails keeping criminals off the streets. The people
in the medical examiners office do an insane average of 400 autopsies per
year per employee, yet are some of the lowest paid in the country. Why are
we wasting money on a name change?
83063 From: k7ant <k7ant@f...>
Date: Sat Apr 19, 2003 0:46pm
Subject: Re: Metric/SAE
Guess what? You need to go buy some metrics. The jeep is both SAE and
Metric with no rhime or reason.
Bill W
--- In az_vjc@yahoogroups.com, "Kent Warner" <KnetAZ@q...> wrote:
> OK, this is going to show what a TJ newbie I am , but I am certain
> that that bolt that holds the front sway bar bracket to the frame is
> 16mm. Are TJ's metric? I though for sure some of it was SAE.
Don't
> tell me there is both on here, cuz I have NO metric wrenches (CJ's
> didn't need 'em).
83064 From: Rick Norman <4x4xfun1@c...>
Date: Sat Apr 19, 2003 1:01pm
Subject: Need some tubing bent............
I am building new steering for my XJ from 1.25 DOM. I need to have a 10 degree bend in my track bar, and (2) 5 degree bends in my tie rod. Anyone out there with a bender that can do this for me real quick, this weekend, if possible. Duffy, maybe??
I can pay in beer or cash for your time :)
Rick 602-430-5638
Got Groceries?
83065 From: AzVJC Website <azvjc@a...>
Date: Sat Apr 19, 2003 1:15pm
Subject: [TR] Unspecified - Wednesday, June 25, 2003
Hello All,
Bob Lynn is leading an Unspecified trail run on Wednesday, June 25, 2003.
When:
Where:
Rating: None
Length:
CB Channel:
Click Here To Add Your Name to the Sign Up List
Thank You,
- The AzVJC Website