PDA

View Full Version : Scrap steel ?



cdhowell
09-02-2008, 03:07 PM
Have a good load of scrap to sell, where would be the best place to take it? In casa Grande area, so something on the south end of town.

ademster
09-02-2008, 03:23 PM
Have a good load of scrap to sell, where would be the best place to take it? In casa Grande area, so something on the south end of town.


what kind of steel do you have?


I could use some 1"x24"x1/6 if you have any..

also
2.5X2.5X1/4" square tubing

SavageSun4x4
09-02-2008, 06:20 PM
Tell us what you got, I am flush after my last load but I never turn down steel I can use.

AZCA Jeeper
09-02-2008, 10:39 PM
I saw a commercial for a place called...called something. I can't remember. I think it was "We Buy Scrap" but I'm not promising anything. I meant to write it down because I have some scrap copper I want to get rid of.




OK, I found it. It really was called We Buy Scrap.:fashizzle:

We Buy Scrap
2903 W Broadway Rd, Phoenix, AZ 85041

Phone: (602) 243-3181

SIC:Scrap and Waste Materials

Line of Business:Whole Scrap/Waste Material


BTW, anyone know how much cat. convertors are worth or what they have in them that makes them valuable? I see stuff about "we buy cat. convertors" all the time and I also hear about theft quite a bit. Kind of makes me wish I had the muffler shop guy give me the old convertor.....maybe.

mysunnshine
09-03-2008, 07:10 AM
BTW, anyone know how much cat. convertors are worth or what they have in them that makes them valuable?

Platinum

1BDRUBI
09-03-2008, 07:19 AM
Platinum

X2 the main thing in them is platinum but there are several other precious metals in there too

ademster
09-03-2008, 08:20 AM
THe muffler shop can not give you the cat if it was replaced, it is against federal law.


they are even allow to turn them in for cash.

cdhowell
09-03-2008, 08:43 AM
I have several small pieces of 6" channel. They were cross members for pallet racks. Not exactly jeep fab material.

Tom Schenk
09-03-2008, 02:18 PM
Just dump it out at Table Mesa

K7VZ
09-03-2008, 03:45 PM
How much is scrap steel worth? I figured I have about 150 pounds. Old rotors, take offs from the XJ lift, etc.

AZCA Jeeper
09-03-2008, 05:31 PM
THe muffler shop can not give you the cat if it was replaced, it is against federal law.


they are even allow to turn them in for cash.

Ah, I see. The only way I could have kept it and sold it would have been for me to do the work myself.

Oh well, no big deal. Just wondered.

cdhowell
09-09-2008, 09:35 AM
Any one else

FrenchChili
09-09-2008, 10:17 AM
How much is scrap steel worth? I figured I have about 150 pounds. Old rotors, take offs from the XJ lift, etc.

Most scrap places give value per ton...unpreparred steel is probably around $80-100per ton. If you are a business you may get a few more bucks.

To make money on scrap steel it's easier to sell through Craigslist.