4 inch lift front trackbar

[slickrrr]

put in a teraflex 4 inch lift directions say to redrill the front bracket for the track bar, it is only off like a quarter inch, not gonna drill it, adjustable track bar is the best answer and if anyone out there has one I would be interested, Im gonna just bolt it up for now, I followed the directions for centering the axle to redrill and it stays the same, quarter inch off, anything to worry about?

[KennethS]

I drove mine around with it offset by over 1/2 inch for many years - I didn't know enough when I bought the Jeep to know it needed an adjustable track bar. When the factory track bar got sloppy from age I bought an adjustable one and finally got the front end centered. I can't say I noticed any difference in anything, other than the death wobble due to the loose track bar went away, that is.

[Wayco]

I have the front track bar from my 3" Tera-flex lift, it might work for you. If you want to try it, you can have it.

[brian lujan]

i don't like track bars so the next lift kit i get is the TERA FLEX MAX LCG kit, it dosn't have track bars front or rear. instead it has triangulated upper control arms front $ rear.

[Wayco]

i don't like track bars so the next lift kit i get is the TERA FLEX MAX LCG kit, it dosn't have track bars front or rear. instead it has triangulated upper control arms front $ rear.

Imagine that! I guess that's why I have a couple of these laying around:
http://www.virtualjeepclub.com/showthread.php?t=30764