how much should i ask for a dana 30

[terron gregg]

complete disc to disc setup for a tj with 3.73/locrite all stock

[lancetkenyon]

Drum to drum??? You mean a D35 rear, or D30 front with disc to disc?

[terron gregg]

i to am retarded lance. id be giving away a 35. i meant disc to dis for a 30

[lancetkenyon]

i to am retarded lance. id be giving away a 35. i meant disc to dis for a 30

add info...gears? upgraded shafts? Joints? diff cover/guard?

[terron gregg]

re read the post lance all thats there

[FrenchChili]

200, just because you have a locker in it. W/out locker around 50-100....

Anything more might as well get ford 44 or wag 44...

[FrenchChili]

Lance is retarded too:D

[terron gregg]

yeah sometimes

[lancetkenyon]

Lance is retarded too:D

yep. You should ask $300, you could get $100 for shafts, $100 for the locker, and $100 for the housing.

[FrenchChili]

Impressive, also I'm amazed with all the yj guys here no one would take my spare yj shafts, for FREE!!! If I put a price on them would that help:confused:

[terron gregg]

thats what i was thinking that id be better of parting it out
now second question ?what vehicle could i get a front 44 out of with out having to go all crazy with shorting the axle to fit under my tj besides a Rubicon

[FrenchChili]

thats what i was thinking that id be better of parting it out
now second question ?what vehicle could i get a front 44 out of with out having to go all crazy with shorting the axle to fit under my tj besides a Rubicon

Scout 44 I think

[terron gregg]

will they work with tj ?

[terron gregg]

Impressive, also I'm amazed with all the yj guys here no one would take my spare yj shafts, for FREE!!! If I put a price on them would that help:confused: will the shafts work in a tj ?

[FrenchChili]

will they work with tj ?

you will need to install brackets and drive shaft?

[mingoglia]

I think it should be against the TOS here to sell a d35 regardless of it is has a locker or not. D35's should go in the trash so the tradition of the turd dies with the Jeep it came out of. Sell the locker and shafts out of it and throw the rest away. You'll be doing a service to the rest of the Jeep community.

Mike

[lancetkenyon]

I think it should be against the TOS here to sell a d35 regardless of it is has a locker or not. D35's should go in the trash so the tradition of the turd dies with the Jeep it came out of. Sell the locker and shafts out of it and throw the rest away. You'll be doing a service to the rest of the Jeep community.

Mike

It's a D30, :knob:

[terron gregg]

complete drum to drum setup for a tj with 3.73/locrite all stock
its a d 30 and i agree with you that would of been my first upgrade if it was

[FrenchChili]

Seriously Mike, you're on here so much you can't even finish reading sentences from eye redness:D But offtopic you are right, we should ban any D35 parts being sold.

[OlneyJeeps]

scout 44 is passenger drop
81 newer fs waggy drivers drop

[FrenchChili]

scout 44 is passenger drop
81 newer fs waggy drivers drop

dang....well maybe you could intall a divorce T-case :D

[mingoglia]

It's a D30, :knob:
..... :stupid: I've always wanted to use this emoticon.

[Billy 4 hp]

thats what i was thinking that id be better of parting it out
now second question ?what vehicle could i get a front 44 out of with out having to go all crazy with shorting the axle to fit under my tj besides a Rubicon

The only true bolt in Dana 44 for your TJ will come from a Rubicon or would have to be custom ordered if you needed something bigger and better (Dynatrac for instance)...

Sure an early Bronco Dana 44 or Scout II (isn't that a passenger side drop?) could be made to work but you would have countless hours in fabricating parts and brackets, changing the bolt pattern, etc.... To "bolt in" said axle into a TJ.... At that point you would be better off going FS axle's F&R....

JMHO

[lancetkenyon]

..... :stupid: I've always wanted to use this emoticon.

I don't get to use the Knob one very often, just to guys I know.

[Jdemonto@Airpark Jeep Sales]

You should swap in a rubicon housing and sell yours...keep the knuckles and brakes..they bolt right on to a D44 Rubicon housing

All the info you need to swap a rubicon D44 (http://www.virtualjeepclub.com/showthread.php?t=30390)

Jason

[lancetkenyon]

Rubis are easy.

[terron gregg]

where can i find a decent ( cheap ) housing for the rubi 44

[desertfabmotors]

where can i find a decent ( cheap ) housing for the rubi 44

Used ones are hard to get!!

I have new frt D44 bare housings, :)

[TomHatch]

where can i find a decent ( cheap ) housing for the rubi 44

<$700 at Airpark

[FrenchChili]

<$700 at Airpark

If that's the case get a different 44, have a shop shorten it, you would be better of $$$.

[terron gregg]

what on average will i be looking at getting one shortened. im trying to see if this is realistic goal for this year .i have to keep it to a minimal we have to pay for our wedding so trying to figure it out.

[Jdemonto@Airpark Jeep Sales]

where can i find a decent ( cheap ) housing for the rubi 44

New they retail for $675....You can get a discount or find a good used one for $300-$400 (empty) and build away! I spent $1680 and I took a year to build finding all the great deals etc!

Jason

[terron gregg]

so jason if i were to buy one id be only spending a few hundred more then wouldnt i ??

[Jdemonto@Airpark Jeep Sales]

so jason if i were to buy one id be only spending a few hundred more then wouldnt i ??

Depends on what deals you find

I got $200 for my D30 housing only with 4.88 gears no locker

Jason

[RokNRich]

I spent $1680 and I took a year to build finding all the great deals etc!


$1,700 is halfway to a D60.

What is wrong with your D30 Terron ? Most guys (ok, TJ guys) upgrade the D30 and then run them until they do D60's or go bankrupt.............:)

PS- Your myspace wedding page is cute, found yourself a looker, good job !

[terron gregg]

$1,700 is halfway to a D60.

What is wrong with your D30 Terron ? Most guys (ok, TJ guys) upgrade the D30 and then run them until they do D60's or go bankrupt.............:)

PS- Your myspace wedding page is cute, found yourself a looker, good job ! nothing wrong buddy of mine is looking for a complete 30/ i have a little bit of a heavy right foot .thought it would be a good time to go to a 44 cause in the long run id like it to be 44/60 but the price is out of reach right now should be good just going to chromolys .
shes a trooper cant tell you haw many trip rescues shes been on with me in the middle of the night with no doors in the middle of winter

[sms1688]

AS for the D35 I got 300$ for mine and got 250$ for my d30 just got to find the right buyer.:fashizzle:

[OlneyJeeps]

Sales 101 "evarything is worth what any one person will pay for it within the time you have to sell it" (me)

[FrenchChili]

If you try to sell me a D35 for $300 you better run fast.:cool:

[terron gregg]

If you try to sell me a D35 for $300 you better run fast.:cool:or pull of some matrix moves

[sms1688]

If you try to sell me a D35 for $300 you better run fast.:cool:


Trust me I ran like the crazy after he gave me the cash. It did have a locker and 4.88 gears but still I got a great price for it

[Tay-J]

You should give it to me because I am collecting Dana 30s and 35s to make a statue out of, thats about all they are good for!