who is spending tax money on their jeep and what are you getting ?

[terron gregg]

me im getting a new tire carrier and all the rest of my lift parts \ gears

[Papa Mo]

4 33x12.5x15 BFG MT's, driveshaft fixed, Currie HD steering, rear locker, getting lower control arms redone with skids, and getting all 4 ball joints replaced.

[AZG23]

Not really...but sorta...gonna get a HAM radio set up, adn an AK with toys that go with it...

[WalterD]

5 TIRES, 35x12.50x15 Baja Claws for now.

[Papa Mo]

5 TIRES, 35x12.50x15 Baja Claws for now.

oh you gave it away!!!

[probable cause]

going to 35x12.50 16's mtz's will have 4 mtr's about 50% and one 100% tread left for sale after i get my mtz

[CooL_DaD]

Wifes getting a new Cage , Sliders and new Cromoly tie rod....
I got a Warn xp9.5 .............SWEET

[ArizonaSunshine]

I get to make a bigger payment on my credit card

[Bilt4Comfort]

I get to make a bigger payment on my credit card

Ditto

[quick]

4" lift, 33's, CB.:aagh:

[TRobertsRN]

Haven't done the taxes yet, so don't know if it will happen, but the plan is:

AIR CONDITIONING

[terron gregg]

better know than in the summer

[Duality]

I anticipate a $654 return, but what about those credits?

[AZScooby]

SYE and cv DS, CrMly Axles front and rear and rear locker. See if I have any money left over after that.:fashizzle:

[tywilson88]

we can get everyones wishes at ORI

[probable cause]

i wish for carmen electra waiting for me at ORI

[Kelly P]

i wish for carmen electra waiting for me at ORI

Careful what you wish for, you might get Ty in a wig!:aagh:

[probable cause]

bwahahah. i'll do my business somewhere else. to hell with ORI!

[AZG23]

Careful what you wish for, you might get Ty in a wig!:aagh:




Eeeew!:skull:

[Varkyl]

pay off my CC and put a belly pan on the jeep.

[Fire Ball]

Groceries :(

[mingoglia]

If I was single I'd be getting a brand new 609 front axle fully loaded with the monster hybrid 60 knuckles and an ARB. A hydro bender. A monster sized Miller TIG. And all the steel, gears, ARB, etc to start my stretch.... and maybe throw some tires/wheels in there while I'm at it. The rest would pay off some debt.

Since I'm married, probably nothing. :(

[tywilson88]

Eeeew!:skull:

i guess brad has never seen me in a wig.

bwahahah. i'll do my business somewhere else. to hell with ORI!

ok, see you in a little while so we can fix your Track bar

[kjflowers]

I already have my return, however my wife hid it somewhere. . I am sure she will get something nice.

[My Green Jeep]

Ok ladies and gentlemen... here is the outcome of what
I did today....
http://i165.photobucket.com/albums/u65/itrox/Game/100_2079.jpg


http://i165.photobucket.com/albums/u65/itrox/Game/100_2080.jpg


http://i165.photobucket.com/albums/u65/itrox/Game/100_2083.jpg


http://i165.photobucket.com/albums/u65/itrox/Game/100_2084.jpg


http://i165.photobucket.com/albums/u65/itrox/Game/100_2085.jpg


yeah... she does look good...

Joe... thanks a bunch!!! Ohh... dont forget... Jeremy's lunch :smug:

yeah... 5 brand spankin new 35" Baja Claws CAN fit into Walts jeep... :fashizzle:

[terron gregg]

tires look good

[My Green Jeep]

tires look good

Thank you much... lets just see how long they will last him...

[Wayne Kerr]

Make your tax return money go further, buy pre-tested equipment.

Roll Cage (http://www.virtualjeepclub.com/showthread.php?t=30900)

Rock Sliders < SOLD

Winch Plate < SOLD

Swaybar Discos (http://www.virtualjeepclub.com/showthread.php?t=30932)

[lancetkenyon]

Saving mine for my stretch in the summer.

[Clay]

Puttin the budget lift on, swaybar disconnects, new intake system, chromolly axles, and the little hula girl that sits on the dashboard and dances as I drive. Except I am not at the point where I know if I am getting anything back yet. Better get a throttle body spacer in that case as well. Yes, that is what I will do!

My wife dumped me about five years ago so I don't have to worry about getting important stuff like jewelry.
:stuart:

[jpotts]

Atlas t-case. Maybe finish off the front axle I just bought. Piecing stuff together.

[yellow_X]

9000 lb winch, and new 60 inch high lift

[azcharlie]

Paying off the jeep. LOL

[terron gregg]

well ive changed it up getting a good deal on a new rc some of you know i had to sell my last one but this is what the car will start out as im having a tube chassis made for it
http://i175.photobucket.com/albums/w144/terrongregg/ax102.jpg
these two are the 2 paint schemes im thinking about will not have the bed on it though only the bed rails (dove tailing it)
http://i175.photobucket.com/albums/w144/terrongregg/000_3041-1green.jpg
http://i175.photobucket.com/albums/w144/terrongregg/rockracer-1.jpg
this is kinda what the chassis will look like more of a truggy though
http://i175.photobucket.com/albums/w144/terrongregg/losi3.jpg

[jperez]

front and rear lockers..... winch??.... i cant decide?!?!

[ecamp55]

Nope, mine's going straight to the savings.....I just buy jeep stuff as I need it throughout the year

[STEVE FREEMAN]

front locker l hope, will have to see how much comes back:smug:

[T.C.'S TOY]

Gas

[lancetkenyon]

front and rear lockers..... winch??.... i cant decide?!?!

Lockers....unless you have the dreaded Dana Turdy FIve. Then invest in a rear axle WITH a locker.

[mingoglia]

Lockers....unless you have the dreaded Dana Turdy FIve. Then invest in a rear axle WITH a locker.

If you have the turdy five we may need to organize a public stoning in your honor for considering a locker in it. ...and Allen, if you come across this thread....no one asked you. :wings:

[terron gregg]

he is the only one ive met that stands behind his 35

[lancetkenyon]

If you have the turdy five we may need to organize a public stoning in your honor for considering a locker in it. ...and Allen, if you come across this thread....no one asked you. :wings:

Yeah, one day, when you DO break, and you will, we ALL told you so.

[lancetkenyon]

he is the only one ive met that stands behind his 35

Roger "Lowtech" Krause used to stand by his D35. He was just too stubborn and ornery to change it, just because he had to prove everyone wrong.

[mingoglia]

Roger "Lowtech" Krause used to stand by his D35. He was just too stubborn and ornery to change it, just because he had to prove everyone wrong.

He had an XJ. Did he have one of the years when the d35 was not a c-clip?

[lancetkenyon]

He had an XJ. Did he have one of the years when the d35 was not a c-clip?

No, it was a c-clip, with a Super 35 kit and an ARB with 4.56s in it. He did break an axle, on Roger's Crack on Martinez Canyon. Hence the obstacles name, and in remembrance of our fallen friend.

[sctur601]

Bringing back an old thread.
Well I am using my return for a 350 swap, sm465, fullsize dana 44 and a 14 bolt. I am also streatching the wheelbase ,37" tires, fuel cell, aluminum radiator, hi steer, lockers, XJ leafs. I planned on 4 linking one end but I will wait for that since the above parts will use most of the return up. and yes I did get a good return:fashizzle:

[sctur601]

oops double post

[lancetkenyon]

Bringing back an old thread.
Well I am using my return for a 350 swap, sm465, fullsize dana 44 and a 14 bolt. I am also streatching the wheelbase ,37" tires, fuel cell, aluminum radiator, hi steer, lockers, XJ leafs. I planned on 4 linking one end but I will wait for that since the above parts will use most of the return up. and yes I did get a good return:fashizzle:

Dang, I guess you did! Like around $8-10K?

[sctur601]

I wish, it was closer to $6000. But its enough to get alot of the parts I have been stowing away, together and bolted to the jeep. I cant believe my wife thought it was a good idea to spend the money on the jeep. She looks at the jeep as being a good way for the family to spend time together so again:fashizzle:

[lancetkenyon]

Still....$6K is huge. Congrats on the build.

[mingoglia]

Still....$6K is huge. Congrats on the build.

I'm getting $15,800 back this year. The accountant let us know on Saturday :mickey:

[sctur601]

I'm getting $15,800 back this year. The accountant let us know on Saturday :mickey:

So do you want to buy the 4 link for the back of my jeep??!!:laugh2:

Thats a good tax return!!!

[lancetkenyon]

I'm getting $15,800 back this year. The accountant let us know on Saturday :mickey:

I am seeing a LA kit and some decent tires in your future........and maybe a lexan floorboard, so you quit hitting every single diff hanger on the trail........."REAR DIFF!":aagh:

[mingoglia]

I am seeing a LA kit and some decent tires in your future........and maybe a lexan floorboard, so you quit hitting every single diff hanger on the trail........."REAR DIFF!":aagh:

It's funny you should say that. Taking a look at my bookmarks yields a link I saved last week (http://www.maxxis.com/products/automotive/product_detail.asp?id=329). However, the talk about Maxxis no longer offering these to the public (I believe Sean originally brought this up and the conversation continued on the Undertakers) is making me a bit nervous. My plan is to turn the rig into a trailer queen so tire wear won't be an issue.

For the long arm I'm going to stretch it anyway so I'll wait to do that. I probably won't go with a kit though...

Mike

[lancetkenyon]

Supposed to just entail the Comp Creepies from what I heard, which really sucks!

[mingoglia]

Supposed to just entail the Comp Creepies from what I heard, which really sucks!

Yeah, really sucks. I need to get down and see Charlie's brother in hopes that I can sneak in an order before they discontinue them. Since I frequently drive the Jeep on the street I'll probably keep the MTR's for street driving and lower rated trails that I want more of a challenge. I say this now but I'll probably end up getting too lazy to change the tires and leave the jeep in the garage with the stickies and eventually not drive it on the street.

[lancetkenyon]

Yeah, really sucks. I need to get down and see Charlie's brother in hopes that I can sneak in an order before they discontinue them. Since I frequently drive the Jeep on the street I'll probably keep the MTR's for street driving and lower rated trails that I want more of a challenge. I say this now but I'll probably end up getting too lazy to change the tires and leave the jeep in the garage with the stickies and eventually not drive it on the street.

Uhh.....Mike....the Comp Creepies are only available in a 40-13.50-17. Did you not tell me something......like D60s and a stretch is in the works? The Comp Treps come in a 37-12.50-17.

[mingoglia]

Uhh.....Mike....the Comp Creepies are only available in a 40-13.50-17. Did you not tell me something......like D60s and a stretch is in the works? The Comp Treps come in a 37-12.50-17.

Yep, that's why I was going to go with the Comp Treps (I may have accidently said creepies) in the 37" size. I have one of my d60's already and will toss it in within the next couple of months... and am planning on a 609 for the front eventually. When I put the d60 in I'll either set it at 100" or 104" depending on how the mood moves me at the time. :aagh: I'm planning on trying to stick with 37's and minimal lift to keep the COG low. So far I've been able to run 35's on 3.5" of lift... and with some more cutting (in the back with the stretch) I should be able to run 37's. I haven't ruled out 4.5" though so we'll see.

Mike

[Allen]

I'm not getting anything back :aagh: I'm gona be payin:aagh:

[Ted]

Spent mine on fixing the transmission :mad:

[Duality]

I'm getting 650 back. I don't make enough to get 6-15 thousand like you guys. Only reason I'm getting anything back is because of my payments on almost a half million dollars worth of home... Sometimes being house poor has a plus side!

That being said... Probably no jeep toys for me, but I might actually pay my bills on time.