blooddrive
01-05-2004, 10:32 PM
63737-63761
63737 From: Scott Kruize <skruize@c...>
Date: Tue Aug 20, 2002 8:39am
Subject: RE: Re: airial photos of group #2 on the CK run
I looked and couldn't see any timbers down in the bottom of the wash. If
he did chuck some he set a world record for distance. :D
Scott K
-----Original Message-----
From: tomas2691 [mailto:tomasr@a...]
Sent: Tuesday, August 20, 2002 8:33 AM
To: az_vjc@yahoogroups.com
Subject: [az_vjc] Re: airial photos of group #2 on the CK run
So, Stu, did you chuck any timber at the ledge?
-Roger
--- In az_vjc@y..., "Stu Olson" <solson8@q...> wrote:
> http://www.stu-offroad.com/others/photos-main.htm then click on
the
> AZVJC Anniversary Run link
>
>
>
>
>
> Stu Olson
>
> www.stu-offroad.com
Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
--------------------------------------------------------------------------------
ADVERTISEMENT
63738 From: CoyotEddie <coyoteddie@e...>
Date: Tue Aug 20, 2002 8:57am
Subject: Will these tires work on a Jeep?
"Coyotes roam where they please and thrive on their own terms"
--------------------------------------------------------------------------------
Upgrade OutlookŪ - Add COLOR to your Emails
OutlookŪ is a registered trademark of Microsoft Corporation
63739 From: Darren Richards <r50880@e...>
Date: Tue Aug 20, 2002 9:00am
Subject: Re: Lock Right Install Questions
Randy,
Are you sure about the thrust washers? My front Dana 30 in my CJ7 had
thrust washers. I made the mistake of NOT replacing mine. They were
worn, and that caused there to be slightly too much spacing between the
teeth of the locker. The teeth would constantly slip when they should
be locked. This caused some of the teeth on the lock-right to be
chipped, but after replacing the thrust washers the problem went away
and the locker still performs flawlessly.
Bob, at about $1 apiece, DEFINITELY replace the thrust washers!! I also
agree with what Randy said about breaking axles. I've broken 1 axle and
2 U-joints, and all have been while trying to make a tight turn on
slickrock. I should have bought that twin stick adapter long ago...
-darren
"Siade, Randy non Unisys" wrote:
>
> 1. Yes
> 2. Gear Oil
> 3. A spindle nut wrench. You can do it with a screw driver and hammer but it
> will be much easer with a spindle nut wrench.
> 4. No
> 5. There is no thrush washer
>
> Tips.
>
> 1. Replace your hub bolts with studs and nuts and Lock tight them as the CJ
> D30 is famous for these bolts coming loose.
>
> 2. If you do any hard core wheelin carry spare axels as you will brake axels
> with the lock right in the front.
>
> 3. You will have a very hard time turning with the front locked. When
> turning on hard rocks take you time and do not make sharp turns. Do the
> forward and reverse wiggle to get around tight spots. If you try to take a
> tight turn on hard rock you can easily brake an axel.
>
> I ran a lock right in my 82 CJ with the D30 for about 2 years and I broke 3
> axels. I broke them on trails rated from 4.0 to 4.5+. I got tired of braking
> them and went to a D44 with alloy axels and have not broken one since.
>
> -----Original Message-----
> From: Robert Peck [mailto:rlpii@q...]
> Sent: Monday, August 19, 2002 6:46 PM
> To: AZVJC
> Subject: [az_vjc] Lock Right Install Questions
>
> Any help would be appreciated:
>
> I am getting ready to install a Lock Right Locker in the
> front of my 74 CJ-5, with a Dana 30, and I have a couple of
> questions:
>
> 1. Do I need to get the Performance Cross Shaft? (I have
> a 360 V-8 with 33 X 12.50's and 3.73 Gears)
>
> 2. Beside the Differential Gasket, what other
> parts/gaskets will I need?
>
> 3. To get the axles out, will I need any special tools?
> (I have normal hand tools, impact wrenches, and air tools).
>
> 4. Do the axles have "C" Clips?
>
> 5. Should I replace the thrust washers?
>
> 6. I am planning on doing this on Saturday (August 24) in
> the morning, and I am on the West Side near 59th Ave. and
> Peoria, if anyone wants to stop by and supervise. Never
> done any axle work before.
>
> TIA
> Bob
> 74 CJ-5
> CANT W8
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
--
Darren Richards
Motorola SPS
Advanced Technology Integration Center
phone: 480.413.6013
63740 From: Nick Gasmena <NickG@4...>
Date: Tue Aug 20, 2002 8:59am
Subject: Re: Will these tires work on a Jeep?
Looks like they might be hard to balance :)
All I see is a square... the image did not come through... try again :)
~~~~ Have an EXCEL-ent Day!! ~~~~
Nick Gasmena - nickg@4x4jeep.net
-----------------------
Http://www.excelir.com/greatrates - Your gateway to Financial Freedom!
Home Office: 602-595-7734 Cell: 602-400-8896
-----------------------
My Jeep Pictures - http://www.azvjc.org/Gallery/View.asp?U=1637
My 4x4 Site - Http://www.4x4jeep.net
----- Original Message -----
From: CoyotEddie
To: AZ Virtual Jeep Club
Sent: Tuesday, August 20, 2002 8:57 AM
Subject: [az_vjc] Will these tires work on a Jeep?
"Coyotes roam where they please and thrive on their own terms"
--------------------------------------------------------------------------------
Upgrade OutlookŪ - Add COLOR to your Emails
OutlookŪ is a registered trademark of Microsoft Corporation
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
63741 From: Siade, Randy non Unisys <randy.siade@u...>
Date: Tue Aug 20, 2002 9:05am
Subject: RE: Lock Right Install Questions
Your talk about the thrush washers behind the axel drive gear! I forgot
about those. It has been a long time since I used a lunch box locker. I have
always re-used the old ones with no issues.
-----Original Message-----
From: Darren Richards [mailto:r50880@e...]
Sent: Tuesday, August 20, 2002 9:01 AM
To: Siade, Randy; 'Robert Peck'
Cc: AZVJC
Subject: Re: [az_vjc] Lock Right Install Questions
Randy,
Are you sure about the thrust washers? My front Dana 30 in my CJ7 had
thrust washers. I made the mistake of NOT replacing mine. They were
worn, and that caused there to be slightly too much spacing between the
teeth of the locker. The teeth would constantly slip when they should
be locked. This caused some of the teeth on the lock-right to be
chipped, but after replacing the thrust washers the problem went away
and the locker still performs flawlessly.
Bob, at about $1 apiece, DEFINITELY replace the thrust washers!! I also
agree with what Randy said about breaking axles. I've broken 1 axle and
2 U-joints, and all have been while trying to make a tight turn on
slickrock. I should have bought that twin stick adapter long ago...
-darren
"Siade, Randy non Unisys" wrote:
>
> 1. Yes
> 2. Gear Oil
> 3. A spindle nut wrench. You can do it with a screw driver and hammer but
it
> will be much easer with a spindle nut wrench.
> 4. No
> 5. There is no thrush washer
>
> Tips.
>
> 1. Replace your hub bolts with studs and nuts and Lock tight them as the
CJ
> D30 is famous for these bolts coming loose.
>
> 2. If you do any hard core wheelin carry spare axels as you will brake
axels
> with the lock right in the front.
>
> 3. You will have a very hard time turning with the front locked. When
> turning on hard rocks take you time and do not make sharp turns. Do the
> forward and reverse wiggle to get around tight spots. If you try to take a
> tight turn on hard rock you can easily brake an axel.
>
> I ran a lock right in my 82 CJ with the D30 for about 2 years and I broke
3
> axels. I broke them on trails rated from 4.0 to 4.5+. I got tired of
braking
> them and went to a D44 with alloy axels and have not broken one since.
>
> -----Original Message-----
> From: Robert Peck [mailto:rlpii@q...]
> Sent: Monday, August 19, 2002 6:46 PM
> To: AZVJC
> Subject: [az_vjc] Lock Right Install Questions
>
> Any help would be appreciated:
>
> I am getting ready to install a Lock Right Locker in the
> front of my 74 CJ-5, with a Dana 30, and I have a couple of
> questions:
>
> 1. Do I need to get the Performance Cross Shaft? (I have
> a 360 V-8 with 33 X 12.50's and 3.73 Gears)
>
> 2. Beside the Differential Gasket, what other
> parts/gaskets will I need?
>
> 3. To get the axles out, will I need any special tools?
> (I have normal hand tools, impact wrenches, and air tools).
>
> 4. Do the axles have "C" Clips?
>
> 5. Should I replace the thrust washers?
>
> 6. I am planning on doing this on Saturday (August 24) in
> the morning, and I am on the West Side near 59th Ave. and
> Peoria, if anyone wants to stop by and supervise. Never
> done any axle work before.
>
> TIA
> Bob
> 74 CJ-5
> CANT W8
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
--
Darren Richards
Motorola SPS
Advanced Technology Integration Center
phone: 480.413.6013
63742 From: Jon Loveless-DSL <jloveless@d...>
Date: Tue Aug 20, 2002 9:06am
Subject: Rick's Jeep
If every one of the 1500 plus members in this club chipped in $10 we would have Rick Beers well on his way to a new Jeep!! Who wants to organize that one?
Jon Loveless
480-816-0963
jloveless@directvinternet.com
jloveless@delphi-tech.com
63743 From: CoyotEddie <coyoteddie@e...>
Date: Tue Aug 20, 2002 9:12am
Subject: 2nd try-Will these tires work on a Jeep?
"Coyotes roam where they please and thrive on their own terms"
--------------------------------------------------------------------------------
Upgrade OutlookŪ - Add COLOR to your Emails
OutlookŪ is a registered trademark of Microsoft Corporation
63744 From: AzVJC Website <jloveless@d...>
Date: Tue Aug 20, 2002 9:19am
Subject: [FS] 3 ProComp MudTerrain tires and 5 black rockcrawler rims
Price: 3 mounted/balanced tires - $200, 2 rims $20 each
Contact: Jon Loveless 480-816-0963
Total of 5 American Racing black rock crawler rims - 3 have tires mounted and balanced. All tires in very good condition - 1 was a spare and is like new. $250 for the lot or $80/$60/$60 for the tires and $20 for each of the 2 unmounted rims.
Jon Loveless
63745 From: AzVJC Website <jloveless@d...>
Date: Tue Aug 20, 2002 9:24am
Subject: [FS] D30 complete from 98TJ
Price: looking for $500 - make offer
Contact: Jon Loveless - 480-816-0963
Complete D30 with PowerTrax NoSlip locker, ABS disk brakes, 4.56 gears. 27,000 miles total. Locker has 12,000 miles and 4.56 gears have about 8,000 miles. Also includes a Hunter Off-Road strenghtening kit including shock skids and a couple of trusses welded on.
jloveless@directvinternet.com
Jon Loveless
63746 From: Scott Kruize <skruize@c...>
Date: Tue Aug 20, 2002 9:46am
Subject: RE: [FS] D30 complete from 98TJ
Jon,
What did you replace it with?
Scott K
-----Original Message-----
From: AzVJC Website [mailto:jloveless@directvinternet.com]
Sent: Tuesday, August 20, 2002 4:24 PM
To: AzVJC
Subject: [az_vjc] [FS] D30 complete from 98TJ
Price: looking for $500 - make offer
Contact: Jon Loveless - 480-816-0963
Complete D30 with PowerTrax NoSlip locker, ABS disk brakes, 4.56 gears. 27,000 miles total. Locker has 12,000 miles and 4.56 gears have about 8,000 miles. Also includes a Hunter Off-Road strenghtening kit including shock skids and a couple of trusses welded on.
jloveless@directvinternet.com
Jon Loveless
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
63747 From: jeepthang87yj <jeep_thang@h...>
Date: Tue Aug 20, 2002 9:51am
Subject: (FS) Update/Reminder Puppies Prices Dropped
These puppies are not up for sale yet as they are still weening, but
will be going up soon 1 week. I am just wandering if
anybody in the club would like a first chance of getting one or two.
I don't know much about the puppies as they are my mothers, but they
are very cute. There are 5 Golden and 3 Black Labs for sale, all
puppies are Pure Bread and Papered, AKC Registered both Male and
Female on site, do not know how many of each.
The asking price has been dropped to $300.00. My parents bought a
house and they need to sell the dogs.
If you are interested Call my mom or dad
Contacts:
Audie Kirkpatrick: Cell# 520-870-2797 (My Dad)
Robin Kirkpatrick: Cell# 520-982-2797 (My Momma)
I do think that they will reserve puppies for those interested.
The puppies are located in Central Tucson Az.
Sincerely: JEEP THANG
63748 From: zj_lopez <off-road@c...>
Date: Tue Aug 20, 2002 9:53am
Subject: Re: Rick's Jeep
I dont want to organize this, but put me down for the 10 bucks. I
haven't meet Rick yet, but I've read lots of good things about him
and that works for me.
If we, as a club, can come together for our own, like you guys/gals
did for others (I missed the Relief Run so I can't say "we"), all the
better for the club and it's members. - Jose
--- In az_vjc@y..., "Jon Loveless-DSL" <jloveless@d...> wrote:
> If every one of the 1500 plus members in this club chipped in $10 we
> would have Rick Beers well on his way to a new Jeep!! Who wants to
> organize that one?
>
>
> Jon Loveless
> 480-816-0963
> jloveless@d...
> jloveless@d...
63749 From: Michael Wixom <h8pvmnt@h...>
Date: Tue Aug 20, 2002 10:20am
Subject: Re: Rick's Jeep
Tom LaFrance already has set-up something through his paypal account. I donated to it on Sunday.
Mike Wixom
85 CJ-7
----- Original Message -----
From: Jon Loveless-DSL
To: AZ_vjc
Sent: Tuesday, August 20, 2002 9:06 AM
Subject: [az_vjc] Rick's Jeep
If every one of the 1500 plus members in this club chipped in $10 we would have Rick Beers well on his way to a new Jeep!! Who wants to organize that one?
Jon Loveless
480-816-0963
jloveless@directvinternet.com
jloveless@delphi-tech.com
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
63750 From: my1stjeep <my1stjeep@e...>
Date: Tue Aug 20, 2002 11:03am
Subject: Re: A BIG THANKS FOR EVERYONE
If anyone tells you that you can't belong just let me know, I will
give Sharky a spoon and their address...<grin>
Chris
"AzA"----------------------------------------------------------------
--- In az_vjc@y..., "RICK BEER" <RIKNAZ@M...> wrote:
> Hello everyone just wanted to say THANK YOU for all the e-mails
phone calls & even all the prayers that me & my family received over
the weekend
>
> this is the best group of caring giving people that I have ever
came across I had e-mails from folks that I never met saying there
prayers for me & my family just because of everyone in this
wonderful club we call the AZVJC I cant even put the words together
on how me & my family feels
>
>
> Ps. since I don't have a jeep anymore can I still be apart of
this wonderful jeep club
> THANKS RICK BEERGet more from the Web. FREE MSN Explorer
download : http://explorer.msn.com
63751 From: AzVJC Website <azvjc@a...>
Date: Tue Aug 20, 2002 11:11am
Subject: [FS] Four X Doctor Diff Guards
Price: $65
Contact: Jason LaLiberty 602-595-5739
Brand new in Box. Had a couple of cnxld orders so I am selling these to get my cost back.
Thanks,
Jason
AMC 20
Dana 35
Dana 30
Dana 44
Jason LaLiberty
63752 From: Joe W <arizonajeep@c...>
Date: Tue Aug 20, 2002 11:24am
Subject: Tom LaFrance... what is the paypal donation account for Rick Beer?
63753 From: The Acuna Family <mkacuna@c...>
Date: Tue Aug 20, 2002 11:40am
Subject: Fw: Rick Beer rebuild fund
----- Original Message -----
From: "tom lafrance" <tlafrance@j...>
To: <joe.west@s...>
Cc: <az_vjc@yahoogroups.com>
Sent: Saturday, August 17, 2002 10:55 AM
Subject: Re: [az_vjc] Rick Beer rebuild fund
> Ok, for now I'll use my own PayPal Acct: tlafrance@j...
> Use Quasi cash as the option, and put "Rick Beer rebuild fund" into the
> notes section so I can keep it separate.
> I'll open an acct at BofA next week and deposit ALL the PayPal proceeds
> into it on a weekly basis.
> That way we can have 2 methods of donation. Give what you can, when his
> rig is rebuilt or replaced and trail worthy again, I'll post a master
> list of who donated to the cause. Let the generosity flow and remember
> "Jeep Karma" is always returned 10 fold.
>
> As a side thought, I wonder if any vendors would be willing to donate to
> Rick's cause?
>
> Tom LaFrance
>
>
> On Sat, 17 Aug 2002 09:25:42 -0700 "Joe West" <joe.west@s...>
> writes:
> > Tom,
> >
> > I think your idea of PayPal is a great idea. For people who don't
> > have
> > paypal accounts but wish to contribute, they can always just give it
> > to the
> > closest member who has a paypal account and ask them to donate it
> > for them.
> > If anyone wishes to contribute in the Mesa area and doesn't have a
> > paypal
> > account, I can transfer the funds for you.
> >
> > I imagine at a minimum, Rick has an insurance deductible to take
> > care of...
> > and perhaps his Jeep was old enough that he didn't have
> > comprehensive
> > coverage at all... Rick has absolutely gone out of his way for
> > quite a few
> > people over the past couple of years and I for one, am grateful for
> > the
> > chance to pay something back.
> >
> > Tom... do you want us to contribute to your account? Let us know
> > the
> > details and we'll get the ball rolling.
> >
> > Kind Regards,
> >
> > Joe West
> >
> >
> >
> > > -----Original Message-----
> > > From: tom lafrance [mailto:tlafrance@j...]
> > > Sent: Saturday, August 17, 2002 8:57 AM
> > > To: az_vjc@yahoogroups.com
> > > Subject: [az_vjc] Rick Beer rebuild fund
> > >
> > >
> > > I'd like to be the first to initiate a Rick Beer "Jeep rebuild
> > fund".
> > > Rick has supported our club and it's members, often at times
> > > going beyond
> > > the call of duty. I'll need a few volunteers to help administrate
> > the
> > > smaller details, so e-mail me if you can help.
> > >
> > > So far I figure PayPal is a good start, any other suggestions
> > > of where to
> > > collect donations?
> > >
> > > It's time to return some of the "Jeep Karma" Rick has shown us.
> > >
> > > Tom LaFrance
> > >
> > >
> > --------------------------------------------------------------------
> > > "In the 60's people took acid to make the world weird.
> > > Now the world is weird and people take Prozac to make it normal."
> > >
> > >
> > >
> > > Your use of Yahoo! Groups is subject to
> > > http://docs.yahoo.com/info/terms/
> > >
> > >
> >
> >
>
>
> --------------------------------------------------------------------
> "In the 60's people took acid to make the world weird.
> Now the world is weird and people take Prozac to make it normal."
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
63754 From: Mike Hoyt <mike@v...>
Date: Tue Aug 20, 2002 11:40am
Subject: Re: Rick Beer rebuild fund
----- Original Message -----
From: "tom lafrance" <tlafrance@j...>
To: <joe.west@s...>
Cc: <az_vjc@yahoogroups.com>
Sent: Saturday, August 17, 2002 10:55 AM
Subject: Re: [az_vjc] Rick Beer rebuild fund
> Ok, for now I'll use my own PayPal Acct: tlafrance@j...
> Use Quasi cash as the option, and put "Rick Beer rebuild fund" into the
> notes section so I can keep it separate.
> I'll open an acct at BofA next week and deposit ALL the PayPal proceeds
> into it on a weekly basis.
> That way we can have 2 methods of donation. Give what you can, when his
> rig is rebuilt or replaced and trail worthy again, I'll post a master
> list of who donated to the cause. Let the generosity flow and remember
> "Jeep Karma" is always returned 10 fold.
>
> As a side thought, I wonder if any vendors would be willing to donate to
> Rick's cause?
>
> Tom LaFrance
>
>
> On Sat, 17 Aug 2002 09:25:42 -0700 "Joe West" <joe.west@s...>
> writes:
> > Tom,
> >
> > I think your idea of PayPal is a great idea. For people who don't
> > have
> > paypal accounts but wish to contribute, they can always just give it
> > to the
> > closest member who has a paypal account and ask them to donate it
> > for them.
> > If anyone wishes to contribute in the Mesa area and doesn't have a
> > paypal
> > account, I can transfer the funds for you.
> >
> > I imagine at a minimum, Rick has an insurance deductible to take
> > care of...
> > and perhaps his Jeep was old enough that he didn't have
> > comprehensive
> > coverage at all... Rick has absolutely gone out of his way for
> > quite a few
> > people over the past couple of years and I for one, am grateful for
> > the
> > chance to pay something back.
> >
> > Tom... do you want us to contribute to your account? Let us know
> > the
> > details and we'll get the ball rolling.
> >
> > Kind Regards,
> >
> > Joe West
> >
> >
> >
> > > -----Original Message-----
> > > From: tom lafrance [mailto:tlafrance@j...]
> > > Sent: Saturday, August 17, 2002 8:57 AM
> > > To: az_vjc@yahoogroups.com
> > > Subject: [az_vjc] Rick Beer rebuild fund
> > >
> > >
> > > I'd like to be the first to initiate a Rick Beer "Jeep rebuild
> > fund".
> > > Rick has supported our club and it's members, often at times
> > > going beyond
> > > the call of duty. I'll need a few volunteers to help administrate
> > the
> > > smaller details, so e-mail me if you can help.
> > >
> > > So far I figure PayPal is a good start, any other suggestions
> > > of where to
> > > collect donations?
> > >
> > > It's time to return some of the "Jeep Karma" Rick has shown us.
> > >
> > > Tom LaFrance
> > >
> > >
> > --------------------------------------------------------------------
> > > "In the 60's people took acid to make the world weird.
> > > Now the world is weird and people take Prozac to make it normal."
> > >
> > >
> > >
> > > Your use of Yahoo! Groups is subject to
> > > http://docs.yahoo.com/info/terms/
> > >
> > >
> >
> >
>
>
> --------------------------------------------------------------------
> "In the 60's people took acid to make the world weird.
> Now the world is weird and people take Prozac to make it normal."
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
63755 From: Gary Holmes <niitoyis@w...>
Date: Tue Aug 20, 2002 0:49pm
Subject: Re: Re: Fw: [AZ_FSJA] vapor lock
Darren:
I ended up routing the fuel lines up and over the fender well to get
away form the exhaust heat too. Not as much of an issue for I had
problems obviously on the long highway runs wiht the fuel and or fuel
injection. Well, back to the dreawing board!
Gary Holmes
Darren Richards wrote:
>I have the 360 from a FSJ in my CJ, and for years I had a terrible
>problem with vapor lock any time the temperature outside was over about
>85 degrees. The filter with the return line helped the problem, but
>didn't eliminate it. I installed an electric fuel pump, insulated the
>fuel lines, installed a heat shield between the carb and the manifold,
>but all to no avail. Finally, re-routing the fuel lines on the outside
>of the frame away from the exhaust fixed the problem...
>
>-darren
>
63756 From: Gary Holmes <niitoyis@w...>
Date: Tue Aug 20, 2002 0:55pm
Subject: Re: Re: Rick's Jeep
Put me down for the $10. Rick being back on the road with a Jeep is worth it to me. Where are we collecting these funds?
Gary Holmes
zj_lopez wrote:
I dont want to organize this, but put me down for the 10 bucks. I haven't meet Rick yet, but I've read lots of good things about him and that works for me. If we, as a club, can come together for our own, like you guys/gals did for others (I missed the Relief Run so I can't say "we"), all the better for the club and it's members. - Jose--- In az_vjc@y..., "Jon Loveless-DSL" wrote:
If every one of the 1500 plus members in this club chipped in $10 wewould have Rick Beers well on his way to a new Jeep!! Who wants toorganize that one?Jon Loveless480-816-0963jloveless@d...jloveless@d...
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
63757 From: richard logan <rlogan@d...>
Date: Tue Aug 20, 2002 1:16pm
Subject: Rick Beer
I am glad that all and all he made it ok, I am in for $10.00 also to help with with Jeep being back on the road I need to know where I could send money and should it be a check made to him.
Rick Logan 92 YJ
63758 From: Darren Richards <r50880@e...>
Date: Tue Aug 20, 2002 1:17pm
Subject: Re: Re: Fw: [AZ_FSJA] vapor lock
Yep, I routed my fuel line up over the fender, in front of the radiator,
over the other fender and then to the carburetor, but that STILL didn't
solve the problem. There was a metal gas line that ran within about 4
inches of the exhaust. It wasn't until I rerouted that section that my
problem went away...
-darren
Gary Holmes wrote:
>
> Darren:
>
> I ended up routing the fuel lines up and over the fender well to get
> away form the exhaust heat too. Not as much of an issue for I had
> problems obviously on the long highway runs wiht the fuel and or fuel
> injection. Well, back to the dreawing board!
>
> Gary Holmes
>
> Darren Richards wrote:
>
> >I have the 360 from a FSJ in my CJ, and for years I had a terrible
> >problem with vapor lock any time the temperature outside was over about
> >85 degrees. The filter with the return line helped the problem, but
> >didn't eliminate it. I installed an electric fuel pump, insulated the
> >fuel lines, installed a heat shield between the carb and the manifold,
> >but all to no avail. Finally, re-routing the fuel lines on the outside
> >of the frame away from the exhaust fixed the problem...
> >
> >-darren
> >
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
63759 From: Jesus Chio <jchio@a...>
Date: Tue Aug 20, 2002 1:36pm
Subject: Specs on this Jeep?
I saw it once in the parking lot of 4WS and one night before a run on Woodpecker (I think)..
Any of you guys know the specs of this sweet Jeep? I remember it had a big engine and 5x5.5" bolt pattern with 42s. Im kicking arround the idea of a 500cc powered CJ2, and this looks a lot like what Id like to do.
Any help will be appreciated!
Jesus Chio
www.alloffroad.com
------------------------------------------------------------------
GOT .COM?
www.offroadhost.com
------------------------------------------------------------------
Attachment: (image/jpeg) pempsteveflattylrg.jpg [not stored]
63760 From: jeepthang87yj <jeep_thang@h...>
Date: Tue Aug 20, 2002 2:17pm
Subject: Old Diff Covers laying around
Just wandering
Does anybody have any old diff covers laying around for a D30 or D35.
I would pay almost nothing for them?
The question is not
"If you pick your nose"
but
"Where you put the booger"
Sincerely: JEEP THANG
Larry, Carmen and Lil Em
63761 From: AzVJC Website <azvjc@a...>
Date: Tue Aug 20, 2002 2:30pm
Subject: [FS] NEED TO SELL : BLACK YJ HARDTOP
Price: $725.00 obo
Contact: erik 520-296-2966
black hardtop , for YJ's great shape, all bolts and hardware, comes with side tinted windows, and has a rear wiper, taking up space in my backyard, need to sell
Erik Vasquez
63737 From: Scott Kruize <skruize@c...>
Date: Tue Aug 20, 2002 8:39am
Subject: RE: Re: airial photos of group #2 on the CK run
I looked and couldn't see any timbers down in the bottom of the wash. If
he did chuck some he set a world record for distance. :D
Scott K
-----Original Message-----
From: tomas2691 [mailto:tomasr@a...]
Sent: Tuesday, August 20, 2002 8:33 AM
To: az_vjc@yahoogroups.com
Subject: [az_vjc] Re: airial photos of group #2 on the CK run
So, Stu, did you chuck any timber at the ledge?
-Roger
--- In az_vjc@y..., "Stu Olson" <solson8@q...> wrote:
> http://www.stu-offroad.com/others/photos-main.htm then click on
the
> AZVJC Anniversary Run link
>
>
>
>
>
> Stu Olson
>
> www.stu-offroad.com
Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
--------------------------------------------------------------------------------
ADVERTISEMENT
63738 From: CoyotEddie <coyoteddie@e...>
Date: Tue Aug 20, 2002 8:57am
Subject: Will these tires work on a Jeep?
"Coyotes roam where they please and thrive on their own terms"
--------------------------------------------------------------------------------
Upgrade OutlookŪ - Add COLOR to your Emails
OutlookŪ is a registered trademark of Microsoft Corporation
63739 From: Darren Richards <r50880@e...>
Date: Tue Aug 20, 2002 9:00am
Subject: Re: Lock Right Install Questions
Randy,
Are you sure about the thrust washers? My front Dana 30 in my CJ7 had
thrust washers. I made the mistake of NOT replacing mine. They were
worn, and that caused there to be slightly too much spacing between the
teeth of the locker. The teeth would constantly slip when they should
be locked. This caused some of the teeth on the lock-right to be
chipped, but after replacing the thrust washers the problem went away
and the locker still performs flawlessly.
Bob, at about $1 apiece, DEFINITELY replace the thrust washers!! I also
agree with what Randy said about breaking axles. I've broken 1 axle and
2 U-joints, and all have been while trying to make a tight turn on
slickrock. I should have bought that twin stick adapter long ago...
-darren
"Siade, Randy non Unisys" wrote:
>
> 1. Yes
> 2. Gear Oil
> 3. A spindle nut wrench. You can do it with a screw driver and hammer but it
> will be much easer with a spindle nut wrench.
> 4. No
> 5. There is no thrush washer
>
> Tips.
>
> 1. Replace your hub bolts with studs and nuts and Lock tight them as the CJ
> D30 is famous for these bolts coming loose.
>
> 2. If you do any hard core wheelin carry spare axels as you will brake axels
> with the lock right in the front.
>
> 3. You will have a very hard time turning with the front locked. When
> turning on hard rocks take you time and do not make sharp turns. Do the
> forward and reverse wiggle to get around tight spots. If you try to take a
> tight turn on hard rock you can easily brake an axel.
>
> I ran a lock right in my 82 CJ with the D30 for about 2 years and I broke 3
> axels. I broke them on trails rated from 4.0 to 4.5+. I got tired of braking
> them and went to a D44 with alloy axels and have not broken one since.
>
> -----Original Message-----
> From: Robert Peck [mailto:rlpii@q...]
> Sent: Monday, August 19, 2002 6:46 PM
> To: AZVJC
> Subject: [az_vjc] Lock Right Install Questions
>
> Any help would be appreciated:
>
> I am getting ready to install a Lock Right Locker in the
> front of my 74 CJ-5, with a Dana 30, and I have a couple of
> questions:
>
> 1. Do I need to get the Performance Cross Shaft? (I have
> a 360 V-8 with 33 X 12.50's and 3.73 Gears)
>
> 2. Beside the Differential Gasket, what other
> parts/gaskets will I need?
>
> 3. To get the axles out, will I need any special tools?
> (I have normal hand tools, impact wrenches, and air tools).
>
> 4. Do the axles have "C" Clips?
>
> 5. Should I replace the thrust washers?
>
> 6. I am planning on doing this on Saturday (August 24) in
> the morning, and I am on the West Side near 59th Ave. and
> Peoria, if anyone wants to stop by and supervise. Never
> done any axle work before.
>
> TIA
> Bob
> 74 CJ-5
> CANT W8
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
--
Darren Richards
Motorola SPS
Advanced Technology Integration Center
phone: 480.413.6013
63740 From: Nick Gasmena <NickG@4...>
Date: Tue Aug 20, 2002 8:59am
Subject: Re: Will these tires work on a Jeep?
Looks like they might be hard to balance :)
All I see is a square... the image did not come through... try again :)
~~~~ Have an EXCEL-ent Day!! ~~~~
Nick Gasmena - nickg@4x4jeep.net
-----------------------
Http://www.excelir.com/greatrates - Your gateway to Financial Freedom!
Home Office: 602-595-7734 Cell: 602-400-8896
-----------------------
My Jeep Pictures - http://www.azvjc.org/Gallery/View.asp?U=1637
My 4x4 Site - Http://www.4x4jeep.net
----- Original Message -----
From: CoyotEddie
To: AZ Virtual Jeep Club
Sent: Tuesday, August 20, 2002 8:57 AM
Subject: [az_vjc] Will these tires work on a Jeep?
"Coyotes roam where they please and thrive on their own terms"
--------------------------------------------------------------------------------
Upgrade OutlookŪ - Add COLOR to your Emails
OutlookŪ is a registered trademark of Microsoft Corporation
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
63741 From: Siade, Randy non Unisys <randy.siade@u...>
Date: Tue Aug 20, 2002 9:05am
Subject: RE: Lock Right Install Questions
Your talk about the thrush washers behind the axel drive gear! I forgot
about those. It has been a long time since I used a lunch box locker. I have
always re-used the old ones with no issues.
-----Original Message-----
From: Darren Richards [mailto:r50880@e...]
Sent: Tuesday, August 20, 2002 9:01 AM
To: Siade, Randy; 'Robert Peck'
Cc: AZVJC
Subject: Re: [az_vjc] Lock Right Install Questions
Randy,
Are you sure about the thrust washers? My front Dana 30 in my CJ7 had
thrust washers. I made the mistake of NOT replacing mine. They were
worn, and that caused there to be slightly too much spacing between the
teeth of the locker. The teeth would constantly slip when they should
be locked. This caused some of the teeth on the lock-right to be
chipped, but after replacing the thrust washers the problem went away
and the locker still performs flawlessly.
Bob, at about $1 apiece, DEFINITELY replace the thrust washers!! I also
agree with what Randy said about breaking axles. I've broken 1 axle and
2 U-joints, and all have been while trying to make a tight turn on
slickrock. I should have bought that twin stick adapter long ago...
-darren
"Siade, Randy non Unisys" wrote:
>
> 1. Yes
> 2. Gear Oil
> 3. A spindle nut wrench. You can do it with a screw driver and hammer but
it
> will be much easer with a spindle nut wrench.
> 4. No
> 5. There is no thrush washer
>
> Tips.
>
> 1. Replace your hub bolts with studs and nuts and Lock tight them as the
CJ
> D30 is famous for these bolts coming loose.
>
> 2. If you do any hard core wheelin carry spare axels as you will brake
axels
> with the lock right in the front.
>
> 3. You will have a very hard time turning with the front locked. When
> turning on hard rocks take you time and do not make sharp turns. Do the
> forward and reverse wiggle to get around tight spots. If you try to take a
> tight turn on hard rock you can easily brake an axel.
>
> I ran a lock right in my 82 CJ with the D30 for about 2 years and I broke
3
> axels. I broke them on trails rated from 4.0 to 4.5+. I got tired of
braking
> them and went to a D44 with alloy axels and have not broken one since.
>
> -----Original Message-----
> From: Robert Peck [mailto:rlpii@q...]
> Sent: Monday, August 19, 2002 6:46 PM
> To: AZVJC
> Subject: [az_vjc] Lock Right Install Questions
>
> Any help would be appreciated:
>
> I am getting ready to install a Lock Right Locker in the
> front of my 74 CJ-5, with a Dana 30, and I have a couple of
> questions:
>
> 1. Do I need to get the Performance Cross Shaft? (I have
> a 360 V-8 with 33 X 12.50's and 3.73 Gears)
>
> 2. Beside the Differential Gasket, what other
> parts/gaskets will I need?
>
> 3. To get the axles out, will I need any special tools?
> (I have normal hand tools, impact wrenches, and air tools).
>
> 4. Do the axles have "C" Clips?
>
> 5. Should I replace the thrust washers?
>
> 6. I am planning on doing this on Saturday (August 24) in
> the morning, and I am on the West Side near 59th Ave. and
> Peoria, if anyone wants to stop by and supervise. Never
> done any axle work before.
>
> TIA
> Bob
> 74 CJ-5
> CANT W8
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
--
Darren Richards
Motorola SPS
Advanced Technology Integration Center
phone: 480.413.6013
63742 From: Jon Loveless-DSL <jloveless@d...>
Date: Tue Aug 20, 2002 9:06am
Subject: Rick's Jeep
If every one of the 1500 plus members in this club chipped in $10 we would have Rick Beers well on his way to a new Jeep!! Who wants to organize that one?
Jon Loveless
480-816-0963
jloveless@directvinternet.com
jloveless@delphi-tech.com
63743 From: CoyotEddie <coyoteddie@e...>
Date: Tue Aug 20, 2002 9:12am
Subject: 2nd try-Will these tires work on a Jeep?
"Coyotes roam where they please and thrive on their own terms"
--------------------------------------------------------------------------------
Upgrade OutlookŪ - Add COLOR to your Emails
OutlookŪ is a registered trademark of Microsoft Corporation
63744 From: AzVJC Website <jloveless@d...>
Date: Tue Aug 20, 2002 9:19am
Subject: [FS] 3 ProComp MudTerrain tires and 5 black rockcrawler rims
Price: 3 mounted/balanced tires - $200, 2 rims $20 each
Contact: Jon Loveless 480-816-0963
Total of 5 American Racing black rock crawler rims - 3 have tires mounted and balanced. All tires in very good condition - 1 was a spare and is like new. $250 for the lot or $80/$60/$60 for the tires and $20 for each of the 2 unmounted rims.
Jon Loveless
63745 From: AzVJC Website <jloveless@d...>
Date: Tue Aug 20, 2002 9:24am
Subject: [FS] D30 complete from 98TJ
Price: looking for $500 - make offer
Contact: Jon Loveless - 480-816-0963
Complete D30 with PowerTrax NoSlip locker, ABS disk brakes, 4.56 gears. 27,000 miles total. Locker has 12,000 miles and 4.56 gears have about 8,000 miles. Also includes a Hunter Off-Road strenghtening kit including shock skids and a couple of trusses welded on.
jloveless@directvinternet.com
Jon Loveless
63746 From: Scott Kruize <skruize@c...>
Date: Tue Aug 20, 2002 9:46am
Subject: RE: [FS] D30 complete from 98TJ
Jon,
What did you replace it with?
Scott K
-----Original Message-----
From: AzVJC Website [mailto:jloveless@directvinternet.com]
Sent: Tuesday, August 20, 2002 4:24 PM
To: AzVJC
Subject: [az_vjc] [FS] D30 complete from 98TJ
Price: looking for $500 - make offer
Contact: Jon Loveless - 480-816-0963
Complete D30 with PowerTrax NoSlip locker, ABS disk brakes, 4.56 gears. 27,000 miles total. Locker has 12,000 miles and 4.56 gears have about 8,000 miles. Also includes a Hunter Off-Road strenghtening kit including shock skids and a couple of trusses welded on.
jloveless@directvinternet.com
Jon Loveless
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
63747 From: jeepthang87yj <jeep_thang@h...>
Date: Tue Aug 20, 2002 9:51am
Subject: (FS) Update/Reminder Puppies Prices Dropped
These puppies are not up for sale yet as they are still weening, but
will be going up soon 1 week. I am just wandering if
anybody in the club would like a first chance of getting one or two.
I don't know much about the puppies as they are my mothers, but they
are very cute. There are 5 Golden and 3 Black Labs for sale, all
puppies are Pure Bread and Papered, AKC Registered both Male and
Female on site, do not know how many of each.
The asking price has been dropped to $300.00. My parents bought a
house and they need to sell the dogs.
If you are interested Call my mom or dad
Contacts:
Audie Kirkpatrick: Cell# 520-870-2797 (My Dad)
Robin Kirkpatrick: Cell# 520-982-2797 (My Momma)
I do think that they will reserve puppies for those interested.
The puppies are located in Central Tucson Az.
Sincerely: JEEP THANG
63748 From: zj_lopez <off-road@c...>
Date: Tue Aug 20, 2002 9:53am
Subject: Re: Rick's Jeep
I dont want to organize this, but put me down for the 10 bucks. I
haven't meet Rick yet, but I've read lots of good things about him
and that works for me.
If we, as a club, can come together for our own, like you guys/gals
did for others (I missed the Relief Run so I can't say "we"), all the
better for the club and it's members. - Jose
--- In az_vjc@y..., "Jon Loveless-DSL" <jloveless@d...> wrote:
> If every one of the 1500 plus members in this club chipped in $10 we
> would have Rick Beers well on his way to a new Jeep!! Who wants to
> organize that one?
>
>
> Jon Loveless
> 480-816-0963
> jloveless@d...
> jloveless@d...
63749 From: Michael Wixom <h8pvmnt@h...>
Date: Tue Aug 20, 2002 10:20am
Subject: Re: Rick's Jeep
Tom LaFrance already has set-up something through his paypal account. I donated to it on Sunday.
Mike Wixom
85 CJ-7
----- Original Message -----
From: Jon Loveless-DSL
To: AZ_vjc
Sent: Tuesday, August 20, 2002 9:06 AM
Subject: [az_vjc] Rick's Jeep
If every one of the 1500 plus members in this club chipped in $10 we would have Rick Beers well on his way to a new Jeep!! Who wants to organize that one?
Jon Loveless
480-816-0963
jloveless@directvinternet.com
jloveless@delphi-tech.com
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
63750 From: my1stjeep <my1stjeep@e...>
Date: Tue Aug 20, 2002 11:03am
Subject: Re: A BIG THANKS FOR EVERYONE
If anyone tells you that you can't belong just let me know, I will
give Sharky a spoon and their address...<grin>
Chris
"AzA"----------------------------------------------------------------
--- In az_vjc@y..., "RICK BEER" <RIKNAZ@M...> wrote:
> Hello everyone just wanted to say THANK YOU for all the e-mails
phone calls & even all the prayers that me & my family received over
the weekend
>
> this is the best group of caring giving people that I have ever
came across I had e-mails from folks that I never met saying there
prayers for me & my family just because of everyone in this
wonderful club we call the AZVJC I cant even put the words together
on how me & my family feels
>
>
> Ps. since I don't have a jeep anymore can I still be apart of
this wonderful jeep club
> THANKS RICK BEERGet more from the Web. FREE MSN Explorer
download : http://explorer.msn.com
63751 From: AzVJC Website <azvjc@a...>
Date: Tue Aug 20, 2002 11:11am
Subject: [FS] Four X Doctor Diff Guards
Price: $65
Contact: Jason LaLiberty 602-595-5739
Brand new in Box. Had a couple of cnxld orders so I am selling these to get my cost back.
Thanks,
Jason
AMC 20
Dana 35
Dana 30
Dana 44
Jason LaLiberty
63752 From: Joe W <arizonajeep@c...>
Date: Tue Aug 20, 2002 11:24am
Subject: Tom LaFrance... what is the paypal donation account for Rick Beer?
63753 From: The Acuna Family <mkacuna@c...>
Date: Tue Aug 20, 2002 11:40am
Subject: Fw: Rick Beer rebuild fund
----- Original Message -----
From: "tom lafrance" <tlafrance@j...>
To: <joe.west@s...>
Cc: <az_vjc@yahoogroups.com>
Sent: Saturday, August 17, 2002 10:55 AM
Subject: Re: [az_vjc] Rick Beer rebuild fund
> Ok, for now I'll use my own PayPal Acct: tlafrance@j...
> Use Quasi cash as the option, and put "Rick Beer rebuild fund" into the
> notes section so I can keep it separate.
> I'll open an acct at BofA next week and deposit ALL the PayPal proceeds
> into it on a weekly basis.
> That way we can have 2 methods of donation. Give what you can, when his
> rig is rebuilt or replaced and trail worthy again, I'll post a master
> list of who donated to the cause. Let the generosity flow and remember
> "Jeep Karma" is always returned 10 fold.
>
> As a side thought, I wonder if any vendors would be willing to donate to
> Rick's cause?
>
> Tom LaFrance
>
>
> On Sat, 17 Aug 2002 09:25:42 -0700 "Joe West" <joe.west@s...>
> writes:
> > Tom,
> >
> > I think your idea of PayPal is a great idea. For people who don't
> > have
> > paypal accounts but wish to contribute, they can always just give it
> > to the
> > closest member who has a paypal account and ask them to donate it
> > for them.
> > If anyone wishes to contribute in the Mesa area and doesn't have a
> > paypal
> > account, I can transfer the funds for you.
> >
> > I imagine at a minimum, Rick has an insurance deductible to take
> > care of...
> > and perhaps his Jeep was old enough that he didn't have
> > comprehensive
> > coverage at all... Rick has absolutely gone out of his way for
> > quite a few
> > people over the past couple of years and I for one, am grateful for
> > the
> > chance to pay something back.
> >
> > Tom... do you want us to contribute to your account? Let us know
> > the
> > details and we'll get the ball rolling.
> >
> > Kind Regards,
> >
> > Joe West
> >
> >
> >
> > > -----Original Message-----
> > > From: tom lafrance [mailto:tlafrance@j...]
> > > Sent: Saturday, August 17, 2002 8:57 AM
> > > To: az_vjc@yahoogroups.com
> > > Subject: [az_vjc] Rick Beer rebuild fund
> > >
> > >
> > > I'd like to be the first to initiate a Rick Beer "Jeep rebuild
> > fund".
> > > Rick has supported our club and it's members, often at times
> > > going beyond
> > > the call of duty. I'll need a few volunteers to help administrate
> > the
> > > smaller details, so e-mail me if you can help.
> > >
> > > So far I figure PayPal is a good start, any other suggestions
> > > of where to
> > > collect donations?
> > >
> > > It's time to return some of the "Jeep Karma" Rick has shown us.
> > >
> > > Tom LaFrance
> > >
> > >
> > --------------------------------------------------------------------
> > > "In the 60's people took acid to make the world weird.
> > > Now the world is weird and people take Prozac to make it normal."
> > >
> > >
> > >
> > > Your use of Yahoo! Groups is subject to
> > > http://docs.yahoo.com/info/terms/
> > >
> > >
> >
> >
>
>
> --------------------------------------------------------------------
> "In the 60's people took acid to make the world weird.
> Now the world is weird and people take Prozac to make it normal."
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
63754 From: Mike Hoyt <mike@v...>
Date: Tue Aug 20, 2002 11:40am
Subject: Re: Rick Beer rebuild fund
----- Original Message -----
From: "tom lafrance" <tlafrance@j...>
To: <joe.west@s...>
Cc: <az_vjc@yahoogroups.com>
Sent: Saturday, August 17, 2002 10:55 AM
Subject: Re: [az_vjc] Rick Beer rebuild fund
> Ok, for now I'll use my own PayPal Acct: tlafrance@j...
> Use Quasi cash as the option, and put "Rick Beer rebuild fund" into the
> notes section so I can keep it separate.
> I'll open an acct at BofA next week and deposit ALL the PayPal proceeds
> into it on a weekly basis.
> That way we can have 2 methods of donation. Give what you can, when his
> rig is rebuilt or replaced and trail worthy again, I'll post a master
> list of who donated to the cause. Let the generosity flow and remember
> "Jeep Karma" is always returned 10 fold.
>
> As a side thought, I wonder if any vendors would be willing to donate to
> Rick's cause?
>
> Tom LaFrance
>
>
> On Sat, 17 Aug 2002 09:25:42 -0700 "Joe West" <joe.west@s...>
> writes:
> > Tom,
> >
> > I think your idea of PayPal is a great idea. For people who don't
> > have
> > paypal accounts but wish to contribute, they can always just give it
> > to the
> > closest member who has a paypal account and ask them to donate it
> > for them.
> > If anyone wishes to contribute in the Mesa area and doesn't have a
> > paypal
> > account, I can transfer the funds for you.
> >
> > I imagine at a minimum, Rick has an insurance deductible to take
> > care of...
> > and perhaps his Jeep was old enough that he didn't have
> > comprehensive
> > coverage at all... Rick has absolutely gone out of his way for
> > quite a few
> > people over the past couple of years and I for one, am grateful for
> > the
> > chance to pay something back.
> >
> > Tom... do you want us to contribute to your account? Let us know
> > the
> > details and we'll get the ball rolling.
> >
> > Kind Regards,
> >
> > Joe West
> >
> >
> >
> > > -----Original Message-----
> > > From: tom lafrance [mailto:tlafrance@j...]
> > > Sent: Saturday, August 17, 2002 8:57 AM
> > > To: az_vjc@yahoogroups.com
> > > Subject: [az_vjc] Rick Beer rebuild fund
> > >
> > >
> > > I'd like to be the first to initiate a Rick Beer "Jeep rebuild
> > fund".
> > > Rick has supported our club and it's members, often at times
> > > going beyond
> > > the call of duty. I'll need a few volunteers to help administrate
> > the
> > > smaller details, so e-mail me if you can help.
> > >
> > > So far I figure PayPal is a good start, any other suggestions
> > > of where to
> > > collect donations?
> > >
> > > It's time to return some of the "Jeep Karma" Rick has shown us.
> > >
> > > Tom LaFrance
> > >
> > >
> > --------------------------------------------------------------------
> > > "In the 60's people took acid to make the world weird.
> > > Now the world is weird and people take Prozac to make it normal."
> > >
> > >
> > >
> > > Your use of Yahoo! Groups is subject to
> > > http://docs.yahoo.com/info/terms/
> > >
> > >
> >
> >
>
>
> --------------------------------------------------------------------
> "In the 60's people took acid to make the world weird.
> Now the world is weird and people take Prozac to make it normal."
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
63755 From: Gary Holmes <niitoyis@w...>
Date: Tue Aug 20, 2002 0:49pm
Subject: Re: Re: Fw: [AZ_FSJA] vapor lock
Darren:
I ended up routing the fuel lines up and over the fender well to get
away form the exhaust heat too. Not as much of an issue for I had
problems obviously on the long highway runs wiht the fuel and or fuel
injection. Well, back to the dreawing board!
Gary Holmes
Darren Richards wrote:
>I have the 360 from a FSJ in my CJ, and for years I had a terrible
>problem with vapor lock any time the temperature outside was over about
>85 degrees. The filter with the return line helped the problem, but
>didn't eliminate it. I installed an electric fuel pump, insulated the
>fuel lines, installed a heat shield between the carb and the manifold,
>but all to no avail. Finally, re-routing the fuel lines on the outside
>of the frame away from the exhaust fixed the problem...
>
>-darren
>
63756 From: Gary Holmes <niitoyis@w...>
Date: Tue Aug 20, 2002 0:55pm
Subject: Re: Re: Rick's Jeep
Put me down for the $10. Rick being back on the road with a Jeep is worth it to me. Where are we collecting these funds?
Gary Holmes
zj_lopez wrote:
I dont want to organize this, but put me down for the 10 bucks. I haven't meet Rick yet, but I've read lots of good things about him and that works for me. If we, as a club, can come together for our own, like you guys/gals did for others (I missed the Relief Run so I can't say "we"), all the better for the club and it's members. - Jose--- In az_vjc@y..., "Jon Loveless-DSL" wrote:
If every one of the 1500 plus members in this club chipped in $10 wewould have Rick Beers well on his way to a new Jeep!! Who wants toorganize that one?Jon Loveless480-816-0963jloveless@d...jloveless@d...
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
63757 From: richard logan <rlogan@d...>
Date: Tue Aug 20, 2002 1:16pm
Subject: Rick Beer
I am glad that all and all he made it ok, I am in for $10.00 also to help with with Jeep being back on the road I need to know where I could send money and should it be a check made to him.
Rick Logan 92 YJ
63758 From: Darren Richards <r50880@e...>
Date: Tue Aug 20, 2002 1:17pm
Subject: Re: Re: Fw: [AZ_FSJA] vapor lock
Yep, I routed my fuel line up over the fender, in front of the radiator,
over the other fender and then to the carburetor, but that STILL didn't
solve the problem. There was a metal gas line that ran within about 4
inches of the exhaust. It wasn't until I rerouted that section that my
problem went away...
-darren
Gary Holmes wrote:
>
> Darren:
>
> I ended up routing the fuel lines up and over the fender well to get
> away form the exhaust heat too. Not as much of an issue for I had
> problems obviously on the long highway runs wiht the fuel and or fuel
> injection. Well, back to the dreawing board!
>
> Gary Holmes
>
> Darren Richards wrote:
>
> >I have the 360 from a FSJ in my CJ, and for years I had a terrible
> >problem with vapor lock any time the temperature outside was over about
> >85 degrees. The filter with the return line helped the problem, but
> >didn't eliminate it. I installed an electric fuel pump, insulated the
> >fuel lines, installed a heat shield between the carb and the manifold,
> >but all to no avail. Finally, re-routing the fuel lines on the outside
> >of the frame away from the exhaust fixed the problem...
> >
> >-darren
> >
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
63759 From: Jesus Chio <jchio@a...>
Date: Tue Aug 20, 2002 1:36pm
Subject: Specs on this Jeep?
I saw it once in the parking lot of 4WS and one night before a run on Woodpecker (I think)..
Any of you guys know the specs of this sweet Jeep? I remember it had a big engine and 5x5.5" bolt pattern with 42s. Im kicking arround the idea of a 500cc powered CJ2, and this looks a lot like what Id like to do.
Any help will be appreciated!
Jesus Chio
www.alloffroad.com
------------------------------------------------------------------
GOT .COM?
www.offroadhost.com
------------------------------------------------------------------
Attachment: (image/jpeg) pempsteveflattylrg.jpg [not stored]
63760 From: jeepthang87yj <jeep_thang@h...>
Date: Tue Aug 20, 2002 2:17pm
Subject: Old Diff Covers laying around
Just wandering
Does anybody have any old diff covers laying around for a D30 or D35.
I would pay almost nothing for them?
The question is not
"If you pick your nose"
but
"Where you put the booger"
Sincerely: JEEP THANG
Larry, Carmen and Lil Em
63761 From: AzVJC Website <azvjc@a...>
Date: Tue Aug 20, 2002 2:30pm
Subject: [FS] NEED TO SELL : BLACK YJ HARDTOP
Price: $725.00 obo
Contact: erik 520-296-2966
black hardtop , for YJ's great shape, all bolts and hardware, comes with side tinted windows, and has a rear wiper, taking up space in my backyard, need to sell
Erik Vasquez