blooddrive
01-05-2004, 09:48 PM
63037-63061
63037 From: DesertJeep <joey@d...>
Date: Mon Aug 12, 2002 7:17pm
Subject: RE: Lake Pleasant to Crown King
Anthony,
Do not think that the ledge is gone. I went up to CK about a month after
the bronco club jack hammered it for the running club and it was back.
Maybe not as large as some legends have made it to be but it is there.
Long wheel base vehicles beware.
If you have a stock XJ or ZJ you may consider some timber (2x6). I
normally would not say this but considering the size of the group and
the time that could be spent at this location this may help the progress
of all.
.02
Joey K
93YJ
> -----Original Message-----
> From: chaton602@a... [mailto:chaton602@a...]
> Sent: Monday, August 12, 2002 6:44 PM
> To: BA914@a...; az_vjc@yahoogroups.com
> Subject: Re: [az_vjc] Lake Pleasant to Crown King
>
>
> There's no more ledge. Some bronco club broke it up.
>
> Anthony Celaya
>
>
>
> Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
>
>
--------------------------------------------------------------------------------
ADVERTISEMENT
63038 From: DesertJeep <joey@d...>
Date: Mon Aug 12, 2002 7:22pm
Subject: RE: State Trust
You're absolutely right. There should be some kind of temporary day use
permit or something. As for hammering it out... Been there done that. I
do believe the state is working the issue (we all know how fast the
wheels turn for the state).
However it is a good thing you bring this back up.
Joey K
93YJ
> -----Original Message-----
> From: ezrydr1 [mailto:gmaclaren@c...]
> Sent: Monday, August 12, 2002 6:44 PM
> To: az_vjc@yahoogroups.com
> Subject: [az_vjc] State Trust
>
>
> In answer to Sandee's comment about what I thought would be a good
> change to who the permit covered, I want to clarify a couple of
> points. As far as the the law says[every person must have permit], if
> the permit covered everyone in the vehicle they would be there on a
> permitted basis. I dont think any of us, has a problem buying a
> permit, the problem is that they seem to be to restrictive as to who
> is covered. What a PITA it is, an out of state friend drops in on
> Friday evening, you are going wheeling on Sat. and there is no way
> you can get a permit for that friend to ride along. You mention to
> your neighbor that you're going wheelin' and he wants to go, you have
> an empty seat, but you have to tell that person no, you dont have a
> permit, and there iz no time to get one. We have a member from VJC
> that is going on the Crown King Anv run, he is going to taken his
> elderly aunt, she will prolly never be on State Trust Land again, to
> be legal she needs a peermit, come on, get real. At the very least,
> there should be a way to obtain a permit on-line and pay with PaY-pAL
> Or such as that. Come,on this is the 21st century,
>
>
> There will surley be other views on this, lets get them out
> in the open, and hammer out something that is workable for the
> wheeling community, and the state land trust people. If nothing elsr,
> I or someone else can get with a state legislator, and we can work on
> the existing statute. I personally think the current policy is based
> on someones interpation of what is written.
>
> The state wouldn't lose much if any money, there are x amount
> of vehicles, and x number of seats. What should it matter if the
> other seat has your wife, girlfriend or your Granny in it?
>
>
>
> Gary
>
>
>
>
>
> Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
>
>
63039 From: bermboy2000 <bermboy@h...>
Date: Mon Aug 12, 2002 7:33pm
Subject: Re: 44 sold (again)
Scott get a Diff Guard for that 8.8 before you do ANYTHING!! That
cover is paper thin!!
Scott Maiden
93 YJ
--- In az_vjc@y..., "Scott Kruize" <skruize@c...> wrote:
> The original buyer in Missouri changed his mind. Another buyer in
Tucson
> has agreed to buy it.
>
> Thanks,
>
> Scott
>
> PS, I wonder if he'll keep the diff cover purple? My new axle diff
cover
> needs a paint job. I think I'll paint it and call it a "Plumkin" :D
63040 From: bermboy2000 <bermboy@h...>
Date: Mon Aug 12, 2002 7:45pm
Subject: Re: [FS] Bearing Hub Assemblies for TJ, XJ, or late YJ
Hey Joey,
Already asked and answered;P
http://groups.yahoo.com/group/az_vjc/message/62472
Scott Maiden
93 YJ
--- In az_vjc@y..., "DougB" <azjeep@c...> wrote:
> MessageYeah...well...you know....Baby needs a new pair o
shoes...and some axles.
>
> Doug
>
> ----- Original Message -----
> From: DesertJeep
> To: azjeep@c... ; 'AzVJC'
> Sent: Monday, August 12, 2002 1:19 PM
> Subject: RE: [az_vjc] [FS] Bearing Hub Assemblies for TJ, XJ, or
late YJ
>
>
> Geezz Doug... you selling your Jeep piece by piece or what!? :)
>
> Must be doing some major mods.
>
> Joey K
> 93YJ
>
> ----Original Message-----
> From: AzVJC Website [mailto:azjeep@c...]
> Sent: Monday, August 12, 2002 8:08 PM
> To: AzVJC
> Subject: [az_vjc] [FS] Bearing Hub Assemblies for TJ, XJ, or late
YJ
>
>
> Price: $120 each or $200/pair
>
> Contact: azjeep@c...
>
> New, never used OEM Bearing Hubs for D30 TJ, XJ's ot late YJ's.
>
> These are new, orininal equipment. After market ones go for
$140 each. New OEM's go for around $200 each.
>
> Doug Ballard
>
>
> Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service.
63041 From: AzVJC Website <azvjc@a...>
Date: Mon Aug 12, 2002 7:47pm
Subject: [FS] Hard top and Hard doors for a YJ
Price: $400
Contact: scottmilk9@cox.net
Hard top is grey, it has some cracks in it, was rolled but is repairable, Doors are red, drivers door is in good shape, passsenger door needs some work, door handle and lock is broken. $400 for both or $200 for top and $300 for doors.
Scott Milkovich
63042 From: RICK BEER <RIKNAZ@M...>
Date: Mon Aug 12, 2002 7:55pm
Subject: Re: Rick Beer does it again!
Mike you are right it was a future member selling is rig because his wife has a littel one in the oven & they have 3 kids all ready he is not happy at all for he had the jeep bug
i had so many calls today over this today i was wondering who started this shame on you lol
----- Original Message -----
From: The Acuna Family
Sent: Monday, August 12, 2002 8:53 AM
To: az_vjc@yahoogroups.com; roadrunner4x4; Nick Gasmena
Subject: Re: [az_vjc] Rick Beer does it again!
Nope, the post said a future AZVJC member had to sell his XJ....not Rick.
Mike
----- Original Message -----
From: "Nick Gasmena"
To: ; "roadrunner4x4"
Sent: Monday, August 12, 2002 4:14 AM
Subject: Re: [az_vjc] Rick Beer does it again!
> Maybe not... I think he sold his XJ? :( Its a sad story...
>
> ~~~~ Have an EXCEL-ent Day!! ~~~~
>
> Nick Gasmena - nickg@4x4jeep.net
> -----------------------
> Http://www.excelir.com/greatrates - Your gateway to Financial Freedom!
> Home Office: 602-595-7734 Cell: 602-400-8896
> -----------------------
> My Jeep Pictures - http://www.azvjc.org/Gallery/View.asp?U=1637
> My 4x4 Site - Http://www.4x4jeep.net
> ----- Original Message -----
> From: "roadrunner4x4"
> To:
> Sent: Sunday, August 11, 2002 3:43 PM
> Subject: [az_vjc] Rick Beer does it again!
>
>
> > Just wanted to say "Thanks" Rick, for getting me a great price on my
> > tires, and great service. See you on the trail.
> >
> > Jim
> >
> >
> >
> >
> > Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
> >
> >
>
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
--------------------------------------------------------------------------------
Get more from the Web. FREE MSN Explorer download : http://explorer.msn.com
63043 From: Robert Peck <rlpii@q...>
Date: Mon Aug 12, 2002 8:04pm
Subject: Re: water wetter
Got some from Pep Boys about 4 months ago
Bob
74 CJ-5
CANT W8
The Acuna Family wrote:
Where can I buy water wetter? I know 4WS carries it, but I live out in Surprise. I'm hoping I can get some on this side of town.Thanks, Mike
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
63044 From: Robert Peck <rlpii@q...>
Date: Mon Aug 12, 2002 8:12pm
Subject: Re: [Tech] 73' CJ-5 304 V8 - Mufflers
If you could find a good way to run the exhaust out behind the rear wheel, and not affect your departure angle, that is about the only way to quiet these beasts down. I ran a 304 in a 74 CJ-5 for many years, and it was just plain noisy. Now I've got the 360 in a 74 and guess what, still noisy! (I assume you have the exhaust exiting in front of the rear wheels?) I was trying to come up with a good way to have the tip of the exhaust pipe point more in a downward direction, but haven't worked it out yet. I will need some new headers shortly, and will try and come up with something then.
If you come up with a solution, please let me know . . . . . .
Thanks,
Bob
74 CJ-5
CANT W8
AzVJC Website wrote:
I need help choosing mufflers that will bolt right up to my header collectors and will quiet down my ride. I have used glasspacks, and flowmasters but still to loud. I bolted up regular mufflers and the packing got blown out. Can anyone help?
Tom
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
63045 From: Robert Peck <rlpii@q...>
Date: Mon Aug 12, 2002 8:13pm
Subject: Re: Diff snapping, know anybody to fix it besides FWS
I've used 4 Wheelers Supply on several projects. Always top notch advise and service!
Bob
74 CJ-5
CANT W8
Hackle wrote:
I would agree with Barry on this I have had work on my YJ performed at 4 Wheelers Supply before and would not hesitate to bring it back for more work. They have always been upfront with me. I have seen a lot of posts from this club stating how great 4 Wheelers Supply is when they used them. They deserve a chance to look into your problem before they get thrown to the wolves. Jim F. I refuse to belong to any group that would have me as a member. "Groucho Marx"
Member of the original dirty half dozen.
http://www.users.qwest.net/~jkflorence/index.htm/
http://www.rockrats.org/
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
63046 From: Chris Krieg <rv6a@m...>
Date: Mon Aug 12, 2002 8:13pm
Subject: Re: Diff snapping, know anybody to fix it besides FWS
I agree. Lately, too many people are willing to jump up to condemn a company for what they "THINK" the problem is and what they "THINK" was done wrong. Then they go flaming away without first (or ever) contacting the company in question to see what the real issue is and how it can be resolved.
Remeber when my rear pinion gear grenaded? I did't go flaming the company (not any of the ones mentioned lately) that did the gears because we couldn't be sure it was their problem. I simply changed them and moved on.
In my opinion (key word here), before you go trashing a company for what you think they have done wrong, contact them FIRST to see what the real problem is and how it can be resolved. Give them a chance. Everybody makes mistakes every once in a while. If it is a good company, they will stand behind their product or service and make do their best to makes things right within reason. If you do not do this, then you have no right whatsoever to *****.
4 Wheelers Supply has been very good to a lot of us. They provide us with great service and great prices. Give them a chance to look at it to find out what was wrong before you pass judgement against them. Its only fair
Chris Krieg
From: "DougB"
Date: Mon, 12 Aug 2002 18:31:14 -0700
To: "Gary Holmes" , "clintltravis" , "barry brummett"
Cc:
Subject: Re: [az_vjc] Diff snapping, know anybody to fix it besides FWS
Very good advise!
----- Original Message -----
From: barry brummett
To: Gary Holmes ; clintltravis
Cc: az_vjc@yahoogroups.com
Sent: Monday, August 12, 2002 6:12 PM
Subject: Re: [az_vjc] Diff snapping, know anybody to fix it besides FWS
Here we go again, putting the buggy before the horse. Do you know for sure what is wrong. Have you opened the cover to investigate. Are you starting a bandwagon for everyone to jump on without the proper information. This seems to be the norm for some of the people in this club, which makes me wonder why I am a member.
But then I remember, maybe I can help some people and also receive help and information at the same time.
The rear most likely would have had problems long before if there was an install error. Well within the 90 day labor warranty. It upsets me to see people jump to conclusions without knowing.
Please bring it in to us and let us look at it, we have a ton of experience, probably more than anyone in town. We have a solid reputation for having what you need and good service. So before the rest of those who read your post and jump, as some already have, go see what's wrong and get it resolved.
Bolts just don't back out after 18000 miles.
Barry
Gary Holmes wrote:
Here we go again. More backed out bolts anyone?
Gary Holmes
clintltravis wrote:
>I had 4:56 gears (from Ring & Pinion Service, Inc) and ARBs put in my
>Dana 44 by Fourwheelers Supply back in Oct 2000 (about 18K miles ago).
>
>In Payson Friday night my rear diff started loudly snapping at the
>same speed of the wheels. I pulled the rear driveshaft which made the
>snapping noise almost go away and drove it back to Phx with only
>front wheel drive.
>
>I believe it's probably the ring & pinion, maybe missing a gear. Any
>ideas?
>
>Anybody know an affordable trusted place that can put in new gears
>for me? Not sure I trust Fourwheelers Supply any more.
>
>
>Clint Travis
>602 436-5782
>'97 TJ
>
>
>
>
>Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
--------------------------------------------------------------------------------
Do You Yahoo!?
HotJobs, a Yahoo! service - Search Thousands of New Jobs
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service .
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service .
63047 From: Lon Robinson <lrobinson@c...>
Date: Mon Aug 12, 2002 8:29pm
Subject: RE: OT-Salary Wizard
It shows that I should be making about half of what I am making.
Lon
-----Original Message-----
From: CoyotEddie [mailto:coyoteddie@earthlink.net]
Sent: Monday, August 12, 2002 5:36 PM
To: AZ Virtual Jeep Club
Subject: [az_vjc] OT-Salary Wizard
Sorry this is off track but the larger the group the better the results. Hey you might find out your under paid!!!
I have not been employed for over 16 years but due to business slow down I might have to go get a Job. Please help me out by testing this "Salary Wizard" and let me know if it is accurate or not. Please no details about your personal life.
http://swz-hotjobs.salary.com/salarywizard/layoutscripts/swzl_newsearch.asp
Thanks Ed
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
63048 From: <chaton602@a...>
Date: Mon Aug 12, 2002 4:33pm
Subject: Re: water wetter
Cycle gear on cave creek north of cactus. I use this product on my Honda
CBR900RR, and it works great.
63049 From: jetowle2000 <James.Towle@a...>
Date: Mon Aug 12, 2002 8:34pm
Subject: Re: 44 sold (again)
Yep, Ron's Custom, solid bar guard (no tubing in his product). It
even comes unpainted so you can paint it any color you wish. The
flange is 3/8" steel and if you bolt it up with some grade 8 bolts,
you will never have a problem with it.
Besides, Ron is a heck of a nice guy.
--James
BTW - He has two guards, the extreme duty and regular duty. I got the
regular duty, there are some design "features" I felt I didn't need
that were of the extreme duty guard.
--- In az_vjc@y..., "bermboy2000" <bermboy@h...> wrote:
> Scott get a Diff Guard for that 8.8 before you do ANYTHING!! That
> cover is paper thin!!
>
> Scott Maiden
> 93 YJ
>
> --- In az_vjc@y..., "Scott Kruize" <skruize@c...> wrote:
> > The original buyer in Missouri changed his mind. Another buyer in
> Tucson
> > has agreed to buy it.
> >
> > Thanks,
> >
> > Scott
> >
> > PS, I wonder if he'll keep the diff cover purple? My new axle
diff
> cover
> > needs a paint job. I think I'll paint it and call it
a "Plumkin" :D
63050 From: David Withers <dr_ww@h...>
Date: Mon Aug 12, 2002 8:42pm
Subject: Re: Friday night Car/Jeep show
lurker like the rest of the west siders
i never said i was leaving, just no more e-mails
----Original Message Follows----
From: Chris Krieg <rv6a@m...>
To: "David Withers" <dr_ww@h...>
CC: yldkat55@h..., az_vjc@yahoogroups.com
Subject: Re: [az_vjc] Friday night Car/Jeep show
Date: Sun, 11 Aug 2002 23:05:12 -0700
I thought you were gone
On Sunday, August 11, 2002, at 09:09 PM, David Withers wrote:
>it's sad you'll have to wait a couple of weeks to do it again.
>LOL
>David
>
>
>----Original Message Follows----
>From: "Bill Mish" <yldkat55@h...>
>To: "1" <az_vjc@yahoogroups.com>
>Subject: [az_vjc] Friday night Car/Jeep show
>Date: Sat, 10 Aug 2002 12:59:43 -0700
>
>Hehehe!
>You all missed a pretty good time!
>Saw allot of super cool cars.
>
>Damn tag game!!
>Stu tagged Withers, Withers tagged Anderson, Anderson (Squirrelly little
>Sh@#$t bucket tagged me! Sharky was in there somewhere too I believe.....
>
>Ohh well, we all more than made up for it by teasing Mike relentlessly,
>then
>we unloaded it on an unsuspecting XJ.
>The guy came up and introduced himself later, we questioned him about his
>Jeep, then congratulated him on being "It"!!
>(Sorry, as bad as I am with names, I can't remember his, I'm sure he'll
>speak up though.)
>
>The Jeeps get allot of attention at these shows. Seems the hot rod cruiser
>crowd has allot of respect for modifying and building up something that you
>can do more than cruise the boulevard with.
>
>Had a lengthy conversation with Stu, while the "Kids" drank their "Silver
>Sodas"...... They finally offered Stu one, I couldn't believe they tortured
>him by making him wait that much. (Younger Generation, Baahh!)
>
>Just as we were really starting to have fun, Mama called and reminded me we
>had no kids for the evening.
>(Those of you with children can feel me on this).
>The guys thought it was pretty big funny that I bolted outta there after
>her
>call......as far as they are concerned, I'm super Whooped.... I guess
>that's
>fine by me, I know what's REALLY important in life!
>Anyway, I'll probably do it again in a couple weeks. We'll have to see.
>
>
>
>
>Bill Mish
>1955 Willys CJ3B
>
>
>
>Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
>
>__________________________________________________ _______________
>Join the worldís largest e-mail service with MSN Hotmail.
>http://www.hotmail.com
>
>
>
>
>Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
__________________________________________________ _______________
Chat with friends online, try MSN Messenger: http://messenger.msn.com
63051 From: trmn8rjn98 <trmn8rjn98@a...>
Date: Mon Aug 12, 2002 8:46pm
Subject: Re: [Tech] 95 wrangler - lift / AC
http://www.ackits.com/acsystems/jeepwrangler.htm
Here you go for the AC
John
63052 From: Steve Meyer <steve.j.meyer@c...>
Date: Mon Aug 12, 2002 8:57pm
Subject: Worlds Greatest Showoffs...
Look Ma.... no hands.
http://www.westcoastfilmworks.com/films.htm#
63053 From: Ralph Williams <ralphbw@q...>
Date: Mon Aug 12, 2002 9:03pm
Subject: Re: OT-Salary Wizard
Same here, seems to be pretty low compared to what reality will show.
Phoenix wages that it shows are even a little low for Tucson.
(which is about $4 an hour below Phoenix across the board)
I am looking at the construction industry.
Ralph
Lon Robinson wrote:
> It shows that I should be making about half of what I am making.
>
>
>
> Lon
>
>
>
> -----Original Message-----
> *From:* CoyotEddie [mailto:coyoteddie@e...]
> *Sent:* Monday, August 12, 2002 5:36 PM
> *To:* AZ Virtual Jeep Club
> *Subject:* [az_vjc] OT-Salary Wizard
>
>
>
> Sorry this is off track but the larger the group the better the results.
> Hey you might find out your under paid!!!
>
> I have not been employed for over 16 years but due to business slow down
> I might have to go get a Job. Please help me out by testing this
> **"Salary Wizard"** and let me know if it is accurate or not. Please no
> details about your personal life.
>
> http://swz-hotjobs.salary.com/salarywizard/layoutscripts/swzl_newsearch.asp
>
>
>
> Thanks Ed
>
>
> Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
> <http://docs.yahoo.com/info/terms/>.
>
>
>
> Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
> <http://docs.yahoo.com/info/terms/>.
63054 From: Mike Chatfield <Mike@A...>
Date: Mon Aug 12, 2002 9:08pm
Subject: RE: OT-Salary Wizard
Hmm... if it's low, then I must really be sucking wind. I'm making 15k/year
LESS than what is says I should be.
Perhaps I need to look for a new job? :D
- Mike
-----Original Message-----
From: Ralph Williams [mailto:ralphbw@q...]
Sent: Monday, August 12, 2002 9:03 PM
To: 'AZ Virtual Jeep Club'
Subject: Re: [az_vjc] OT-Salary Wizard
Same here, seems to be pretty low compared to what reality will show.
Phoenix wages that it shows are even a little low for Tucson.
(which is about $4 an hour below Phoenix across the board)
I am looking at the construction industry.
Ralph
Lon Robinson wrote:
> It shows that I should be making about half of what I am making.
>
>
>
> Lon
63055 From: RICK BEER <RIKNAZ@M...>
Date: Mon Aug 12, 2002 9:13pm
Subject: Re: OT-Salary Wizard
maybe we should ask for a pay cut NOT
----- Original Message -----
From: Ralph Williams
Sent: Monday, August 12, 2002 9:00 PM
To: 'AZ Virtual Jeep Club'
Subject: Re: [az_vjc] OT-Salary Wizard
Same here, seems to be pretty low compared to what reality will show.
Phoenix wages that it shows are even a little low for Tucson.
(which is about $4 an hour below Phoenix across the board)
I am looking at the construction industry.
Ralph
Lon Robinson wrote:
> It shows that I should be making about half of what I am making.
>
>
>
> Lon
>
>
>
> -----Original Message-----
> *From:* CoyotEddie [mailto:coyoteddie@earthlink.net]
> *Sent:* Monday, August 12, 2002 5:36 PM
> *To:* AZ Virtual Jeep Club
> *Subject:* [az_vjc] OT-Salary Wizard
>
>
>
> Sorry this is off track but the larger the group the better the results.
> Hey you might find out your under paid!!!
>
> I have not been employed for over 16 years but due to business slow down
> I might have to go get a Job. Please help me out by testing this
> **"Salary Wizard"** and let me know if it is accurate or not. Please no
> details about your personal life.
>
> http://swz-hotjobs.salary.com/salarywizard/layoutscripts/swzl_newsearch.asp
>
>
>
> Thanks Ed
>
>
> Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
> .
>
>
>
> Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
> .
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
--------------------------------------------------------------------------------
Get more from the Web. FREE MSN Explorer download : http://explorer.msn.com
63056 From: jeepindog <jeepindog@y...>
Date: Mon Aug 12, 2002 9:20pm
Subject: Re: Worlds Greatest Showoffs...
What a bunch of useless morons... That is so cool!!! I liked
the soundtrack. I can see it on Anaconda- someone dropping it in
first gear and getting out and walking next to their rig to spot it
as it crawls on it's own!
Lachlan
In az_vjc@y..., "Steve Meyer" <steve.j.meyer@c...> wrote:
> Look Ma.... no hands.
>
> http://www.westcoastfilmworks.com/films.htm#
63057 From: Ralph Williams <ralphbw@q...>
Date: Mon Aug 12, 2002 9:32pm
Subject: Re: OT-Salary Wizard
Or show it to your boss...
How much ya want *NOT* to show it to mine?
Heheh
Ralph
Mike Chatfield wrote:
> Hmm... if it's low, then I must really be sucking wind. I'm making 15k/year
> LESS than what is says I should be.
>
> Perhaps I need to look for a new job? :D
>
> - Mike
>
> -----Original Message-----
> From: Ralph Williams [mailto:ralphbw@q...]
> Sent: Monday, August 12, 2002 9:03 PM
> To: 'AZ Virtual Jeep Club'
> Subject: Re: [az_vjc] OT-Salary Wizard
>
> Same here, seems to be pretty low compared to what reality will show.
> Phoenix wages that it shows are even a little low for Tucson.
> (which is about $4 an hour below Phoenix across the board)
>
> I am looking at the construction industry.
>
> Ralph
>
>
> Lon Robinson wrote:
>
>>It shows that I should be making about half of what I am making.
>>
>>
>>
>>Lon
>
>
>
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
>
63058 From: DougB <azjeep@c...>
Date: Mon Aug 12, 2002 9:38pm
Subject: Re: Diff snapping, know anybody to fix it besides FWS
Ready....FIRE....Aim
:o)
----- Original Message -----
From: Chris Krieg
To: barry brummett
Cc: az_vjc@yahoogroups.com
Sent: Monday, August 12, 2002 8:13 PM
Subject: Re: [az_vjc] Diff snapping, know anybody to fix it besides FWS
I agree. Lately, too many people are willing to jump up to condemn a company for what they "THINK" the problem is and what they "THINK" was done wrong. Then they go flaming away without first (or ever) contacting the company in question to see what the real issue is and how it can be resolved.
Remeber when my rear pinion gear grenaded? I did't go flaming the company (not any of the ones mentioned lately) that did the gears because we couldn't be sure it was their problem. I simply changed them and moved on.
In my opinion (key word here), before you go trashing a company for what you think they have done wrong, contact them FIRST to see what the real problem is and how it can be resolved. Give them a chance. Everybody makes mistakes every once in a while. If it is a good company, they will stand behind their product or service and make do their best to makes things right within reason. If you do not do this, then you have no right whatsoever to *****.
4 Wheelers Supply has been very good to a lot of us. They provide us with great service and great prices. Give them a chance to look at it to find out what was wrong before you pass judgement against them. Its only fair
Chris Krieg
From: "DougB"
Date: Mon, 12 Aug 2002 18:31:14 -0700
To: "Gary Holmes" , "clintltravis" , "barry brummett"
Cc:
Subject: Re: [az_vjc] Diff snapping, know anybody to fix it besides FWS
Very good advise!
----- Original Message -----
From: barry brummett
To: Gary Holmes ; clintltravis
Cc: az_vjc@yahoogroups.com
Sent: Monday, August 12, 2002 6:12 PM
Subject: Re: [az_vjc] Diff snapping, know anybody to fix it besides FWS
Here we go again, putting the buggy before the horse. Do you know for sure what is wrong. Have you opened the cover to investigate. Are you starting a bandwagon for everyone to jump on without the proper information. This seems to be the norm for some of the people in this club, which makes me wonder why I am a member.
But then I remember, maybe I can help some people and also receive help and information at the same time.
The rear most likely would have had problems long before if there was an install error. Well within the 90 day labor warranty. It upsets me to see people jump to conclusions without knowing.
Please bring it in to us and let us look at it, we have a ton of experience, probably more than anyone in town. We have a solid reputation for having what you need and good service. So before the rest of those who read your post and jump, as some already have, go see what's wrong and get it resolved.
Bolts just don't back out after 18000 miles.
Barry
Gary Holmes wrote:
Here we go again. More backed out bolts anyone?
Gary Holmes
clintltravis wrote:
>I had 4:56 gears (from Ring & Pinion Service, Inc) and ARBs put in my
>Dana 44 by Fourwheelers Supply back in Oct 2000 (about 18K miles ago).
>
>In Payson Friday night my rear diff started loudly snapping at the
>same speed of the wheels. I pulled the rear driveshaft which made the
>snapping noise almost go away and drove it back to Phx with only
>front wheel drive.
>
>I believe it's probably the ring & pinion, maybe missing a gear. Any
>ideas?
>
>Anybody know an affordable trusted place that can put in new gears
>for me? Not sure I trust Fourwheelers Supply any more.
>
>
>Clint Travis
>602 436-5782
>'97 TJ
>
>
>
>
>Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
--------------------------------------------------------------------------------
Do You Yahoo!?
HotJobs, a Yahoo! service - Search Thousands of New Jobs
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service .
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service .
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
63059 From: vtboy73 <vtboy73@y...>
Date: Mon Aug 12, 2002 9:37pm
Subject: ATTN.....Allan Alexander!!!!!
Hey Allan,
Give me a call 602-955-4173,
Would like to get you those discos before your trip this weekend,
92yj 4cyl SOA
Scott
63060 From: robert mcneeley <rubberside_up309@y...>
Date: Mon Aug 12, 2002 9:44pm
Subject: RE: Lake Pleasant to Crown King
Just don't let T.C. see ya use the timber or you need to look for it at the bottom of the wash.... :)
Bob
DesertJeep wrote:
Anthony,
Do not think that the ledge is gone. I went up to CK about a month after
the bronco club jack hammered it for the running club and it was back.
Maybe not as large as some legends have made it to be but it is there.
Long wheel base vehicles beware.
If you have a stock XJ or ZJ you may consider some timber (2x6). I
normally would not say this but considering the size of the group and
the time that could be spent at this location this may help the progress
of all.
.02
Joey K
93YJ
> -----Original Message-----
> From: chaton602@aol.com [mailto:chaton602@aol.com]
> Sent: Monday, August 12, 2002 6:44 PM
> To: BA914@aol.com; az_vjc@yahoogroups.com
> Subject: Re: [az_vjc] Lake Pleasant to Crown King
>
>
> There's no more ledge. Some bronco club broke it up.
>
> Anthony Celaya
>
>
>
> Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
>
>
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
--------------------------------------------------------------------------------
Do You Yahoo!?
HotJobs, a Yahoo! service - Search Thousands of New Jobs
63061 From: DesertJeep <joey@d...>
Date: Mon Aug 12, 2002 9:53pm
Subject: RE: Re: [FS] Bearing Hub Assemblies for TJ, XJ, or late YJ
Hey Scott Thanks for refreshing my memory. Did it take you a day and a
half to find that message? ;p (back at ya :)
Joey K
93YJ
> -----Original Message-----
> From: bermboy2000 [mailto:bermboy@h...]
> Sent: Monday, August 12, 2002 7:46 PM
> To: az_vjc@yahoogroups.com
> Subject: [az_vjc] Re: [FS] Bearing Hub Assemblies for TJ, XJ,
> or late YJ
>
>
> Hey Joey,
> Already asked and answered;P
>
> http://groups.yahoo.com/group/az_vjc/message/62472
>
> Scott Maiden
> 93 YJ
>
> --- In az_vjc@y..., "DougB" <azjeep@c...> wrote:
> > MessageYeah...well...you know....Baby needs a new pair o
> shoes...and some axles.
> >
> > Doug
> >
> > ----- Original Message -----
> > From: DesertJeep
> > To: azjeep@c... ; 'AzVJC'
> > Sent: Monday, August 12, 2002 1:19 PM
> > Subject: RE: [az_vjc] [FS] Bearing Hub Assemblies for TJ, XJ, or
> late YJ
> >
> >
> > Geezz Doug... you selling your Jeep piece by piece or what!? :)
> >
> > Must be doing some major mods.
> >
> > Joey K
> > 93YJ
> >
> > ----Original Message-----
> > From: AzVJC Website [mailto:azjeep@c...]
> > Sent: Monday, August 12, 2002 8:08 PM
> > To: AzVJC
> > Subject: [az_vjc] [FS] Bearing Hub Assemblies for TJ, XJ, or late
> YJ
> >
> >
> > Price: $120 each or $200/pair
> >
> > Contact: azjeep@c...
> >
> > New, never used OEM Bearing Hubs for D30 TJ, XJ's ot late YJ's.
> >
> > These are new, orininal equipment. After market ones go for
> $140 each. New OEM's go for around $200 each.
> >
> > Doug Ballard
> >
> >
> > Your use of Yahoo! Groups is subject to the Yahoo! Terms of
> Service.
>
>
>
>
> Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
>
>
63037 From: DesertJeep <joey@d...>
Date: Mon Aug 12, 2002 7:17pm
Subject: RE: Lake Pleasant to Crown King
Anthony,
Do not think that the ledge is gone. I went up to CK about a month after
the bronco club jack hammered it for the running club and it was back.
Maybe not as large as some legends have made it to be but it is there.
Long wheel base vehicles beware.
If you have a stock XJ or ZJ you may consider some timber (2x6). I
normally would not say this but considering the size of the group and
the time that could be spent at this location this may help the progress
of all.
.02
Joey K
93YJ
> -----Original Message-----
> From: chaton602@a... [mailto:chaton602@a...]
> Sent: Monday, August 12, 2002 6:44 PM
> To: BA914@a...; az_vjc@yahoogroups.com
> Subject: Re: [az_vjc] Lake Pleasant to Crown King
>
>
> There's no more ledge. Some bronco club broke it up.
>
> Anthony Celaya
>
>
>
> Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
>
>
--------------------------------------------------------------------------------
ADVERTISEMENT
63038 From: DesertJeep <joey@d...>
Date: Mon Aug 12, 2002 7:22pm
Subject: RE: State Trust
You're absolutely right. There should be some kind of temporary day use
permit or something. As for hammering it out... Been there done that. I
do believe the state is working the issue (we all know how fast the
wheels turn for the state).
However it is a good thing you bring this back up.
Joey K
93YJ
> -----Original Message-----
> From: ezrydr1 [mailto:gmaclaren@c...]
> Sent: Monday, August 12, 2002 6:44 PM
> To: az_vjc@yahoogroups.com
> Subject: [az_vjc] State Trust
>
>
> In answer to Sandee's comment about what I thought would be a good
> change to who the permit covered, I want to clarify a couple of
> points. As far as the the law says[every person must have permit], if
> the permit covered everyone in the vehicle they would be there on a
> permitted basis. I dont think any of us, has a problem buying a
> permit, the problem is that they seem to be to restrictive as to who
> is covered. What a PITA it is, an out of state friend drops in on
> Friday evening, you are going wheeling on Sat. and there is no way
> you can get a permit for that friend to ride along. You mention to
> your neighbor that you're going wheelin' and he wants to go, you have
> an empty seat, but you have to tell that person no, you dont have a
> permit, and there iz no time to get one. We have a member from VJC
> that is going on the Crown King Anv run, he is going to taken his
> elderly aunt, she will prolly never be on State Trust Land again, to
> be legal she needs a peermit, come on, get real. At the very least,
> there should be a way to obtain a permit on-line and pay with PaY-pAL
> Or such as that. Come,on this is the 21st century,
>
>
> There will surley be other views on this, lets get them out
> in the open, and hammer out something that is workable for the
> wheeling community, and the state land trust people. If nothing elsr,
> I or someone else can get with a state legislator, and we can work on
> the existing statute. I personally think the current policy is based
> on someones interpation of what is written.
>
> The state wouldn't lose much if any money, there are x amount
> of vehicles, and x number of seats. What should it matter if the
> other seat has your wife, girlfriend or your Granny in it?
>
>
>
> Gary
>
>
>
>
>
> Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
>
>
63039 From: bermboy2000 <bermboy@h...>
Date: Mon Aug 12, 2002 7:33pm
Subject: Re: 44 sold (again)
Scott get a Diff Guard for that 8.8 before you do ANYTHING!! That
cover is paper thin!!
Scott Maiden
93 YJ
--- In az_vjc@y..., "Scott Kruize" <skruize@c...> wrote:
> The original buyer in Missouri changed his mind. Another buyer in
Tucson
> has agreed to buy it.
>
> Thanks,
>
> Scott
>
> PS, I wonder if he'll keep the diff cover purple? My new axle diff
cover
> needs a paint job. I think I'll paint it and call it a "Plumkin" :D
63040 From: bermboy2000 <bermboy@h...>
Date: Mon Aug 12, 2002 7:45pm
Subject: Re: [FS] Bearing Hub Assemblies for TJ, XJ, or late YJ
Hey Joey,
Already asked and answered;P
http://groups.yahoo.com/group/az_vjc/message/62472
Scott Maiden
93 YJ
--- In az_vjc@y..., "DougB" <azjeep@c...> wrote:
> MessageYeah...well...you know....Baby needs a new pair o
shoes...and some axles.
>
> Doug
>
> ----- Original Message -----
> From: DesertJeep
> To: azjeep@c... ; 'AzVJC'
> Sent: Monday, August 12, 2002 1:19 PM
> Subject: RE: [az_vjc] [FS] Bearing Hub Assemblies for TJ, XJ, or
late YJ
>
>
> Geezz Doug... you selling your Jeep piece by piece or what!? :)
>
> Must be doing some major mods.
>
> Joey K
> 93YJ
>
> ----Original Message-----
> From: AzVJC Website [mailto:azjeep@c...]
> Sent: Monday, August 12, 2002 8:08 PM
> To: AzVJC
> Subject: [az_vjc] [FS] Bearing Hub Assemblies for TJ, XJ, or late
YJ
>
>
> Price: $120 each or $200/pair
>
> Contact: azjeep@c...
>
> New, never used OEM Bearing Hubs for D30 TJ, XJ's ot late YJ's.
>
> These are new, orininal equipment. After market ones go for
$140 each. New OEM's go for around $200 each.
>
> Doug Ballard
>
>
> Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service.
63041 From: AzVJC Website <azvjc@a...>
Date: Mon Aug 12, 2002 7:47pm
Subject: [FS] Hard top and Hard doors for a YJ
Price: $400
Contact: scottmilk9@cox.net
Hard top is grey, it has some cracks in it, was rolled but is repairable, Doors are red, drivers door is in good shape, passsenger door needs some work, door handle and lock is broken. $400 for both or $200 for top and $300 for doors.
Scott Milkovich
63042 From: RICK BEER <RIKNAZ@M...>
Date: Mon Aug 12, 2002 7:55pm
Subject: Re: Rick Beer does it again!
Mike you are right it was a future member selling is rig because his wife has a littel one in the oven & they have 3 kids all ready he is not happy at all for he had the jeep bug
i had so many calls today over this today i was wondering who started this shame on you lol
----- Original Message -----
From: The Acuna Family
Sent: Monday, August 12, 2002 8:53 AM
To: az_vjc@yahoogroups.com; roadrunner4x4; Nick Gasmena
Subject: Re: [az_vjc] Rick Beer does it again!
Nope, the post said a future AZVJC member had to sell his XJ....not Rick.
Mike
----- Original Message -----
From: "Nick Gasmena"
To: ; "roadrunner4x4"
Sent: Monday, August 12, 2002 4:14 AM
Subject: Re: [az_vjc] Rick Beer does it again!
> Maybe not... I think he sold his XJ? :( Its a sad story...
>
> ~~~~ Have an EXCEL-ent Day!! ~~~~
>
> Nick Gasmena - nickg@4x4jeep.net
> -----------------------
> Http://www.excelir.com/greatrates - Your gateway to Financial Freedom!
> Home Office: 602-595-7734 Cell: 602-400-8896
> -----------------------
> My Jeep Pictures - http://www.azvjc.org/Gallery/View.asp?U=1637
> My 4x4 Site - Http://www.4x4jeep.net
> ----- Original Message -----
> From: "roadrunner4x4"
> To:
> Sent: Sunday, August 11, 2002 3:43 PM
> Subject: [az_vjc] Rick Beer does it again!
>
>
> > Just wanted to say "Thanks" Rick, for getting me a great price on my
> > tires, and great service. See you on the trail.
> >
> > Jim
> >
> >
> >
> >
> > Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
> >
> >
>
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
--------------------------------------------------------------------------------
Get more from the Web. FREE MSN Explorer download : http://explorer.msn.com
63043 From: Robert Peck <rlpii@q...>
Date: Mon Aug 12, 2002 8:04pm
Subject: Re: water wetter
Got some from Pep Boys about 4 months ago
Bob
74 CJ-5
CANT W8
The Acuna Family wrote:
Where can I buy water wetter? I know 4WS carries it, but I live out in Surprise. I'm hoping I can get some on this side of town.Thanks, Mike
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
63044 From: Robert Peck <rlpii@q...>
Date: Mon Aug 12, 2002 8:12pm
Subject: Re: [Tech] 73' CJ-5 304 V8 - Mufflers
If you could find a good way to run the exhaust out behind the rear wheel, and not affect your departure angle, that is about the only way to quiet these beasts down. I ran a 304 in a 74 CJ-5 for many years, and it was just plain noisy. Now I've got the 360 in a 74 and guess what, still noisy! (I assume you have the exhaust exiting in front of the rear wheels?) I was trying to come up with a good way to have the tip of the exhaust pipe point more in a downward direction, but haven't worked it out yet. I will need some new headers shortly, and will try and come up with something then.
If you come up with a solution, please let me know . . . . . .
Thanks,
Bob
74 CJ-5
CANT W8
AzVJC Website wrote:
I need help choosing mufflers that will bolt right up to my header collectors and will quiet down my ride. I have used glasspacks, and flowmasters but still to loud. I bolted up regular mufflers and the packing got blown out. Can anyone help?
Tom
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
63045 From: Robert Peck <rlpii@q...>
Date: Mon Aug 12, 2002 8:13pm
Subject: Re: Diff snapping, know anybody to fix it besides FWS
I've used 4 Wheelers Supply on several projects. Always top notch advise and service!
Bob
74 CJ-5
CANT W8
Hackle wrote:
I would agree with Barry on this I have had work on my YJ performed at 4 Wheelers Supply before and would not hesitate to bring it back for more work. They have always been upfront with me. I have seen a lot of posts from this club stating how great 4 Wheelers Supply is when they used them. They deserve a chance to look into your problem before they get thrown to the wolves. Jim F. I refuse to belong to any group that would have me as a member. "Groucho Marx"
Member of the original dirty half dozen.
http://www.users.qwest.net/~jkflorence/index.htm/
http://www.rockrats.org/
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
63046 From: Chris Krieg <rv6a@m...>
Date: Mon Aug 12, 2002 8:13pm
Subject: Re: Diff snapping, know anybody to fix it besides FWS
I agree. Lately, too many people are willing to jump up to condemn a company for what they "THINK" the problem is and what they "THINK" was done wrong. Then they go flaming away without first (or ever) contacting the company in question to see what the real issue is and how it can be resolved.
Remeber when my rear pinion gear grenaded? I did't go flaming the company (not any of the ones mentioned lately) that did the gears because we couldn't be sure it was their problem. I simply changed them and moved on.
In my opinion (key word here), before you go trashing a company for what you think they have done wrong, contact them FIRST to see what the real problem is and how it can be resolved. Give them a chance. Everybody makes mistakes every once in a while. If it is a good company, they will stand behind their product or service and make do their best to makes things right within reason. If you do not do this, then you have no right whatsoever to *****.
4 Wheelers Supply has been very good to a lot of us. They provide us with great service and great prices. Give them a chance to look at it to find out what was wrong before you pass judgement against them. Its only fair
Chris Krieg
From: "DougB"
Date: Mon, 12 Aug 2002 18:31:14 -0700
To: "Gary Holmes" , "clintltravis" , "barry brummett"
Cc:
Subject: Re: [az_vjc] Diff snapping, know anybody to fix it besides FWS
Very good advise!
----- Original Message -----
From: barry brummett
To: Gary Holmes ; clintltravis
Cc: az_vjc@yahoogroups.com
Sent: Monday, August 12, 2002 6:12 PM
Subject: Re: [az_vjc] Diff snapping, know anybody to fix it besides FWS
Here we go again, putting the buggy before the horse. Do you know for sure what is wrong. Have you opened the cover to investigate. Are you starting a bandwagon for everyone to jump on without the proper information. This seems to be the norm for some of the people in this club, which makes me wonder why I am a member.
But then I remember, maybe I can help some people and also receive help and information at the same time.
The rear most likely would have had problems long before if there was an install error. Well within the 90 day labor warranty. It upsets me to see people jump to conclusions without knowing.
Please bring it in to us and let us look at it, we have a ton of experience, probably more than anyone in town. We have a solid reputation for having what you need and good service. So before the rest of those who read your post and jump, as some already have, go see what's wrong and get it resolved.
Bolts just don't back out after 18000 miles.
Barry
Gary Holmes wrote:
Here we go again. More backed out bolts anyone?
Gary Holmes
clintltravis wrote:
>I had 4:56 gears (from Ring & Pinion Service, Inc) and ARBs put in my
>Dana 44 by Fourwheelers Supply back in Oct 2000 (about 18K miles ago).
>
>In Payson Friday night my rear diff started loudly snapping at the
>same speed of the wheels. I pulled the rear driveshaft which made the
>snapping noise almost go away and drove it back to Phx with only
>front wheel drive.
>
>I believe it's probably the ring & pinion, maybe missing a gear. Any
>ideas?
>
>Anybody know an affordable trusted place that can put in new gears
>for me? Not sure I trust Fourwheelers Supply any more.
>
>
>Clint Travis
>602 436-5782
>'97 TJ
>
>
>
>
>Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
--------------------------------------------------------------------------------
Do You Yahoo!?
HotJobs, a Yahoo! service - Search Thousands of New Jobs
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service .
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service .
63047 From: Lon Robinson <lrobinson@c...>
Date: Mon Aug 12, 2002 8:29pm
Subject: RE: OT-Salary Wizard
It shows that I should be making about half of what I am making.
Lon
-----Original Message-----
From: CoyotEddie [mailto:coyoteddie@earthlink.net]
Sent: Monday, August 12, 2002 5:36 PM
To: AZ Virtual Jeep Club
Subject: [az_vjc] OT-Salary Wizard
Sorry this is off track but the larger the group the better the results. Hey you might find out your under paid!!!
I have not been employed for over 16 years but due to business slow down I might have to go get a Job. Please help me out by testing this "Salary Wizard" and let me know if it is accurate or not. Please no details about your personal life.
http://swz-hotjobs.salary.com/salarywizard/layoutscripts/swzl_newsearch.asp
Thanks Ed
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
63048 From: <chaton602@a...>
Date: Mon Aug 12, 2002 4:33pm
Subject: Re: water wetter
Cycle gear on cave creek north of cactus. I use this product on my Honda
CBR900RR, and it works great.
63049 From: jetowle2000 <James.Towle@a...>
Date: Mon Aug 12, 2002 8:34pm
Subject: Re: 44 sold (again)
Yep, Ron's Custom, solid bar guard (no tubing in his product). It
even comes unpainted so you can paint it any color you wish. The
flange is 3/8" steel and if you bolt it up with some grade 8 bolts,
you will never have a problem with it.
Besides, Ron is a heck of a nice guy.
--James
BTW - He has two guards, the extreme duty and regular duty. I got the
regular duty, there are some design "features" I felt I didn't need
that were of the extreme duty guard.
--- In az_vjc@y..., "bermboy2000" <bermboy@h...> wrote:
> Scott get a Diff Guard for that 8.8 before you do ANYTHING!! That
> cover is paper thin!!
>
> Scott Maiden
> 93 YJ
>
> --- In az_vjc@y..., "Scott Kruize" <skruize@c...> wrote:
> > The original buyer in Missouri changed his mind. Another buyer in
> Tucson
> > has agreed to buy it.
> >
> > Thanks,
> >
> > Scott
> >
> > PS, I wonder if he'll keep the diff cover purple? My new axle
diff
> cover
> > needs a paint job. I think I'll paint it and call it
a "Plumkin" :D
63050 From: David Withers <dr_ww@h...>
Date: Mon Aug 12, 2002 8:42pm
Subject: Re: Friday night Car/Jeep show
lurker like the rest of the west siders
i never said i was leaving, just no more e-mails
----Original Message Follows----
From: Chris Krieg <rv6a@m...>
To: "David Withers" <dr_ww@h...>
CC: yldkat55@h..., az_vjc@yahoogroups.com
Subject: Re: [az_vjc] Friday night Car/Jeep show
Date: Sun, 11 Aug 2002 23:05:12 -0700
I thought you were gone
On Sunday, August 11, 2002, at 09:09 PM, David Withers wrote:
>it's sad you'll have to wait a couple of weeks to do it again.
>LOL
>David
>
>
>----Original Message Follows----
>From: "Bill Mish" <yldkat55@h...>
>To: "1" <az_vjc@yahoogroups.com>
>Subject: [az_vjc] Friday night Car/Jeep show
>Date: Sat, 10 Aug 2002 12:59:43 -0700
>
>Hehehe!
>You all missed a pretty good time!
>Saw allot of super cool cars.
>
>Damn tag game!!
>Stu tagged Withers, Withers tagged Anderson, Anderson (Squirrelly little
>Sh@#$t bucket tagged me! Sharky was in there somewhere too I believe.....
>
>Ohh well, we all more than made up for it by teasing Mike relentlessly,
>then
>we unloaded it on an unsuspecting XJ.
>The guy came up and introduced himself later, we questioned him about his
>Jeep, then congratulated him on being "It"!!
>(Sorry, as bad as I am with names, I can't remember his, I'm sure he'll
>speak up though.)
>
>The Jeeps get allot of attention at these shows. Seems the hot rod cruiser
>crowd has allot of respect for modifying and building up something that you
>can do more than cruise the boulevard with.
>
>Had a lengthy conversation with Stu, while the "Kids" drank their "Silver
>Sodas"...... They finally offered Stu one, I couldn't believe they tortured
>him by making him wait that much. (Younger Generation, Baahh!)
>
>Just as we were really starting to have fun, Mama called and reminded me we
>had no kids for the evening.
>(Those of you with children can feel me on this).
>The guys thought it was pretty big funny that I bolted outta there after
>her
>call......as far as they are concerned, I'm super Whooped.... I guess
>that's
>fine by me, I know what's REALLY important in life!
>Anyway, I'll probably do it again in a couple weeks. We'll have to see.
>
>
>
>
>Bill Mish
>1955 Willys CJ3B
>
>
>
>Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
>
>__________________________________________________ _______________
>Join the worldís largest e-mail service with MSN Hotmail.
>http://www.hotmail.com
>
>
>
>
>Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
__________________________________________________ _______________
Chat with friends online, try MSN Messenger: http://messenger.msn.com
63051 From: trmn8rjn98 <trmn8rjn98@a...>
Date: Mon Aug 12, 2002 8:46pm
Subject: Re: [Tech] 95 wrangler - lift / AC
http://www.ackits.com/acsystems/jeepwrangler.htm
Here you go for the AC
John
63052 From: Steve Meyer <steve.j.meyer@c...>
Date: Mon Aug 12, 2002 8:57pm
Subject: Worlds Greatest Showoffs...
Look Ma.... no hands.
http://www.westcoastfilmworks.com/films.htm#
63053 From: Ralph Williams <ralphbw@q...>
Date: Mon Aug 12, 2002 9:03pm
Subject: Re: OT-Salary Wizard
Same here, seems to be pretty low compared to what reality will show.
Phoenix wages that it shows are even a little low for Tucson.
(which is about $4 an hour below Phoenix across the board)
I am looking at the construction industry.
Ralph
Lon Robinson wrote:
> It shows that I should be making about half of what I am making.
>
>
>
> Lon
>
>
>
> -----Original Message-----
> *From:* CoyotEddie [mailto:coyoteddie@e...]
> *Sent:* Monday, August 12, 2002 5:36 PM
> *To:* AZ Virtual Jeep Club
> *Subject:* [az_vjc] OT-Salary Wizard
>
>
>
> Sorry this is off track but the larger the group the better the results.
> Hey you might find out your under paid!!!
>
> I have not been employed for over 16 years but due to business slow down
> I might have to go get a Job. Please help me out by testing this
> **"Salary Wizard"** and let me know if it is accurate or not. Please no
> details about your personal life.
>
> http://swz-hotjobs.salary.com/salarywizard/layoutscripts/swzl_newsearch.asp
>
>
>
> Thanks Ed
>
>
> Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
> <http://docs.yahoo.com/info/terms/>.
>
>
>
> Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
> <http://docs.yahoo.com/info/terms/>.
63054 From: Mike Chatfield <Mike@A...>
Date: Mon Aug 12, 2002 9:08pm
Subject: RE: OT-Salary Wizard
Hmm... if it's low, then I must really be sucking wind. I'm making 15k/year
LESS than what is says I should be.
Perhaps I need to look for a new job? :D
- Mike
-----Original Message-----
From: Ralph Williams [mailto:ralphbw@q...]
Sent: Monday, August 12, 2002 9:03 PM
To: 'AZ Virtual Jeep Club'
Subject: Re: [az_vjc] OT-Salary Wizard
Same here, seems to be pretty low compared to what reality will show.
Phoenix wages that it shows are even a little low for Tucson.
(which is about $4 an hour below Phoenix across the board)
I am looking at the construction industry.
Ralph
Lon Robinson wrote:
> It shows that I should be making about half of what I am making.
>
>
>
> Lon
63055 From: RICK BEER <RIKNAZ@M...>
Date: Mon Aug 12, 2002 9:13pm
Subject: Re: OT-Salary Wizard
maybe we should ask for a pay cut NOT
----- Original Message -----
From: Ralph Williams
Sent: Monday, August 12, 2002 9:00 PM
To: 'AZ Virtual Jeep Club'
Subject: Re: [az_vjc] OT-Salary Wizard
Same here, seems to be pretty low compared to what reality will show.
Phoenix wages that it shows are even a little low for Tucson.
(which is about $4 an hour below Phoenix across the board)
I am looking at the construction industry.
Ralph
Lon Robinson wrote:
> It shows that I should be making about half of what I am making.
>
>
>
> Lon
>
>
>
> -----Original Message-----
> *From:* CoyotEddie [mailto:coyoteddie@earthlink.net]
> *Sent:* Monday, August 12, 2002 5:36 PM
> *To:* AZ Virtual Jeep Club
> *Subject:* [az_vjc] OT-Salary Wizard
>
>
>
> Sorry this is off track but the larger the group the better the results.
> Hey you might find out your under paid!!!
>
> I have not been employed for over 16 years but due to business slow down
> I might have to go get a Job. Please help me out by testing this
> **"Salary Wizard"** and let me know if it is accurate or not. Please no
> details about your personal life.
>
> http://swz-hotjobs.salary.com/salarywizard/layoutscripts/swzl_newsearch.asp
>
>
>
> Thanks Ed
>
>
> Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
> .
>
>
>
> Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
> .
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
--------------------------------------------------------------------------------
Get more from the Web. FREE MSN Explorer download : http://explorer.msn.com
63056 From: jeepindog <jeepindog@y...>
Date: Mon Aug 12, 2002 9:20pm
Subject: Re: Worlds Greatest Showoffs...
What a bunch of useless morons... That is so cool!!! I liked
the soundtrack. I can see it on Anaconda- someone dropping it in
first gear and getting out and walking next to their rig to spot it
as it crawls on it's own!
Lachlan
In az_vjc@y..., "Steve Meyer" <steve.j.meyer@c...> wrote:
> Look Ma.... no hands.
>
> http://www.westcoastfilmworks.com/films.htm#
63057 From: Ralph Williams <ralphbw@q...>
Date: Mon Aug 12, 2002 9:32pm
Subject: Re: OT-Salary Wizard
Or show it to your boss...
How much ya want *NOT* to show it to mine?
Heheh
Ralph
Mike Chatfield wrote:
> Hmm... if it's low, then I must really be sucking wind. I'm making 15k/year
> LESS than what is says I should be.
>
> Perhaps I need to look for a new job? :D
>
> - Mike
>
> -----Original Message-----
> From: Ralph Williams [mailto:ralphbw@q...]
> Sent: Monday, August 12, 2002 9:03 PM
> To: 'AZ Virtual Jeep Club'
> Subject: Re: [az_vjc] OT-Salary Wizard
>
> Same here, seems to be pretty low compared to what reality will show.
> Phoenix wages that it shows are even a little low for Tucson.
> (which is about $4 an hour below Phoenix across the board)
>
> I am looking at the construction industry.
>
> Ralph
>
>
> Lon Robinson wrote:
>
>>It shows that I should be making about half of what I am making.
>>
>>
>>
>>Lon
>
>
>
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
>
63058 From: DougB <azjeep@c...>
Date: Mon Aug 12, 2002 9:38pm
Subject: Re: Diff snapping, know anybody to fix it besides FWS
Ready....FIRE....Aim
:o)
----- Original Message -----
From: Chris Krieg
To: barry brummett
Cc: az_vjc@yahoogroups.com
Sent: Monday, August 12, 2002 8:13 PM
Subject: Re: [az_vjc] Diff snapping, know anybody to fix it besides FWS
I agree. Lately, too many people are willing to jump up to condemn a company for what they "THINK" the problem is and what they "THINK" was done wrong. Then they go flaming away without first (or ever) contacting the company in question to see what the real issue is and how it can be resolved.
Remeber when my rear pinion gear grenaded? I did't go flaming the company (not any of the ones mentioned lately) that did the gears because we couldn't be sure it was their problem. I simply changed them and moved on.
In my opinion (key word here), before you go trashing a company for what you think they have done wrong, contact them FIRST to see what the real problem is and how it can be resolved. Give them a chance. Everybody makes mistakes every once in a while. If it is a good company, they will stand behind their product or service and make do their best to makes things right within reason. If you do not do this, then you have no right whatsoever to *****.
4 Wheelers Supply has been very good to a lot of us. They provide us with great service and great prices. Give them a chance to look at it to find out what was wrong before you pass judgement against them. Its only fair
Chris Krieg
From: "DougB"
Date: Mon, 12 Aug 2002 18:31:14 -0700
To: "Gary Holmes" , "clintltravis" , "barry brummett"
Cc:
Subject: Re: [az_vjc] Diff snapping, know anybody to fix it besides FWS
Very good advise!
----- Original Message -----
From: barry brummett
To: Gary Holmes ; clintltravis
Cc: az_vjc@yahoogroups.com
Sent: Monday, August 12, 2002 6:12 PM
Subject: Re: [az_vjc] Diff snapping, know anybody to fix it besides FWS
Here we go again, putting the buggy before the horse. Do you know for sure what is wrong. Have you opened the cover to investigate. Are you starting a bandwagon for everyone to jump on without the proper information. This seems to be the norm for some of the people in this club, which makes me wonder why I am a member.
But then I remember, maybe I can help some people and also receive help and information at the same time.
The rear most likely would have had problems long before if there was an install error. Well within the 90 day labor warranty. It upsets me to see people jump to conclusions without knowing.
Please bring it in to us and let us look at it, we have a ton of experience, probably more than anyone in town. We have a solid reputation for having what you need and good service. So before the rest of those who read your post and jump, as some already have, go see what's wrong and get it resolved.
Bolts just don't back out after 18000 miles.
Barry
Gary Holmes wrote:
Here we go again. More backed out bolts anyone?
Gary Holmes
clintltravis wrote:
>I had 4:56 gears (from Ring & Pinion Service, Inc) and ARBs put in my
>Dana 44 by Fourwheelers Supply back in Oct 2000 (about 18K miles ago).
>
>In Payson Friday night my rear diff started loudly snapping at the
>same speed of the wheels. I pulled the rear driveshaft which made the
>snapping noise almost go away and drove it back to Phx with only
>front wheel drive.
>
>I believe it's probably the ring & pinion, maybe missing a gear. Any
>ideas?
>
>Anybody know an affordable trusted place that can put in new gears
>for me? Not sure I trust Fourwheelers Supply any more.
>
>
>Clint Travis
>602 436-5782
>'97 TJ
>
>
>
>
>Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
--------------------------------------------------------------------------------
Do You Yahoo!?
HotJobs, a Yahoo! service - Search Thousands of New Jobs
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service .
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service .
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
63059 From: vtboy73 <vtboy73@y...>
Date: Mon Aug 12, 2002 9:37pm
Subject: ATTN.....Allan Alexander!!!!!
Hey Allan,
Give me a call 602-955-4173,
Would like to get you those discos before your trip this weekend,
92yj 4cyl SOA
Scott
63060 From: robert mcneeley <rubberside_up309@y...>
Date: Mon Aug 12, 2002 9:44pm
Subject: RE: Lake Pleasant to Crown King
Just don't let T.C. see ya use the timber or you need to look for it at the bottom of the wash.... :)
Bob
DesertJeep wrote:
Anthony,
Do not think that the ledge is gone. I went up to CK about a month after
the bronco club jack hammered it for the running club and it was back.
Maybe not as large as some legends have made it to be but it is there.
Long wheel base vehicles beware.
If you have a stock XJ or ZJ you may consider some timber (2x6). I
normally would not say this but considering the size of the group and
the time that could be spent at this location this may help the progress
of all.
.02
Joey K
93YJ
> -----Original Message-----
> From: chaton602@aol.com [mailto:chaton602@aol.com]
> Sent: Monday, August 12, 2002 6:44 PM
> To: BA914@aol.com; az_vjc@yahoogroups.com
> Subject: Re: [az_vjc] Lake Pleasant to Crown King
>
>
> There's no more ledge. Some bronco club broke it up.
>
> Anthony Celaya
>
>
>
> Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
>
>
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
--------------------------------------------------------------------------------
Do You Yahoo!?
HotJobs, a Yahoo! service - Search Thousands of New Jobs
63061 From: DesertJeep <joey@d...>
Date: Mon Aug 12, 2002 9:53pm
Subject: RE: Re: [FS] Bearing Hub Assemblies for TJ, XJ, or late YJ
Hey Scott Thanks for refreshing my memory. Did it take you a day and a
half to find that message? ;p (back at ya :)
Joey K
93YJ
> -----Original Message-----
> From: bermboy2000 [mailto:bermboy@h...]
> Sent: Monday, August 12, 2002 7:46 PM
> To: az_vjc@yahoogroups.com
> Subject: [az_vjc] Re: [FS] Bearing Hub Assemblies for TJ, XJ,
> or late YJ
>
>
> Hey Joey,
> Already asked and answered;P
>
> http://groups.yahoo.com/group/az_vjc/message/62472
>
> Scott Maiden
> 93 YJ
>
> --- In az_vjc@y..., "DougB" <azjeep@c...> wrote:
> > MessageYeah...well...you know....Baby needs a new pair o
> shoes...and some axles.
> >
> > Doug
> >
> > ----- Original Message -----
> > From: DesertJeep
> > To: azjeep@c... ; 'AzVJC'
> > Sent: Monday, August 12, 2002 1:19 PM
> > Subject: RE: [az_vjc] [FS] Bearing Hub Assemblies for TJ, XJ, or
> late YJ
> >
> >
> > Geezz Doug... you selling your Jeep piece by piece or what!? :)
> >
> > Must be doing some major mods.
> >
> > Joey K
> > 93YJ
> >
> > ----Original Message-----
> > From: AzVJC Website [mailto:azjeep@c...]
> > Sent: Monday, August 12, 2002 8:08 PM
> > To: AzVJC
> > Subject: [az_vjc] [FS] Bearing Hub Assemblies for TJ, XJ, or late
> YJ
> >
> >
> > Price: $120 each or $200/pair
> >
> > Contact: azjeep@c...
> >
> > New, never used OEM Bearing Hubs for D30 TJ, XJ's ot late YJ's.
> >
> > These are new, orininal equipment. After market ones go for
> $140 each. New OEM's go for around $200 each.
> >
> > Doug Ballard
> >
> >
> > Your use of Yahoo! Groups is subject to the Yahoo! Terms of
> Service.
>
>
>
>
> Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
>
>