blooddrive
01-05-2004, 09:34 PM
62636-62660
62636 From: jeepin_in_az <jeepin_in_az@y...>
Date: Fri Aug 9, 2002 9:04am
Subject: Re: Body Lift
Depends on your age, most women like to just lift certain parts of
the body, and cost is pretty high on those parts....:)
Seriously, if you do a body lift on your CJ, or any Jeep, try to keep
it at 1". Are you looking for more clearance for tires?
Mike Baney
--- In az_vjc@y..., "Joe Kearney" <Joe-CJ7@j...> wrote:
> I am thinking about getting a body lift. Does anyone recommend it
or have any opinion about them?
>
> I was thinking about a 1" body lift.
>
> Joe Kearney
> Joe-CJ7@J...
--------------------------------------------------------------------------------
ADVERTISEMENT
62637 From: Siade, Randy <randy.siade@u...>
Date: Fri Aug 9, 2002 9:07am
Subject: RE: Does your Jeep slouch?
All Vehicles seem to do this. It is most noticeable in Jeeps a trucks as you
lift them. Most of the time you see them lean anywere from 1/2" to 3/4". My
CJ leans to the passenger side by 3/4"
-----Original Message-----
From: tweakeraz [mailto:nklussier2@a...]
Sent: Friday, August 09, 2002 8:49 AM
To: az_vjc@yahoogroups.com
Subject: [az_vjc] Does your Jeep slouch?
Hey all,
I know that I do not post much, but it is tough to help others when
your own Jeep knowledge is limited. What the heck, I learn more as I
go along. I have a 2000 Tj and have noticed that the passenger side
sags quite a bit compared to the driver side. As I look around, I
have noticed that a large amount of Jeeps in general do too. Just
not to the extent my own is. My baby is not factory anymore so I am
wondering also if my suspension somehow could be affecting the sag.
I am running a RE Long Arm kit. I guess my question would be
something like, " Does or did your Jeep experience this type of
problem and what have you done to remedy it?" I though about the
adjustable coil spacers, but ONLY on the passenger seems odd.
Couldn't that change how my suspension is supposed to work? Any and
all input is greatly appreciated.
Nathan Lussier
Kingman, AZ
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
62638 From: Chatfield, Mike <Mike@A...>
Date: Fri Aug 9, 2002 9:20am
Subject: RE: Does your Jeep slouch?
My Jeep will lean one way after running a trail and then a different way
after running another trail...
-----Original Message-----
From: Siade, Randy [mailto:randy.siade@u...]
Sent: Friday, August 09, 2002 9:07 AM
To: 'tweakeraz'; az_vjc@yahoogroups.com
Subject: RE: [az_vjc] Does your Jeep slouch?
All Vehicles seem to do this. It is most noticeable in Jeeps a trucks as you
lift them. Most of the time you see them lean anywere from 1/2" to 3/4". My
CJ leans to the passenger side by 3/4"
62639 From: DesertJeep <joey@d...>
Date: Fri Aug 9, 2002 9:21am
Subject: RE: Body Lift
Don't forget a motor mount lift too. Not necessary but recommended. Specially for a TJ to get the oil pan up a bit more.
I have a hockey puck lift. And am now wanting to go to something a bit more solid. The pucks are squishing. I think Daystar makes a body lift that replaces the factory bushings. That is the one I have been looking at because my factory bushings are very old.
Joey K
93YJ
-----Original Message-----
From: Joe Kearney [mailto:Joe-CJ7@jrkearney.com]
Sent: Friday, August 09, 2002 8:46 AM
To: Jeep Club
Subject: [az_vjc] Body Lift
I am thinking about getting a body lift. Does anyone recommend it or have any opinion about them?
I was thinking about a 1" body lift.
Joe Kearney
Joe-CJ7@JRKearney.com
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
62640 From: Scott Kruize <skruize@c...>
Date: Fri Aug 9, 2002 9:31am
Subject: RE: Need help extending rear sway bar links...
Nick,
Don't bother extending the stock ones. It is so easy to build a new set with heim joints and you get a bit of extra articulation. Shouldn't cost more than $50 to build and they are adjustable.
Check out:
http://www.stu-offroad.com/antirock/antirock-3.htm
Scott K
-----Original Message-----
From: Nick Gasmena [mailto:NickG@4x4Jeep.Net]
Sent: Friday, August 09, 2002 4:45 AM
To: Arizona Virtual Jeep Club
Subject: [az_vjc] Need help extending rear sway bar links...
I was wondering if anyone would be interested in helping me cut, and extend my rear sway bar links... Anyone have a welder, and might be interested in helping me with a cheap, but well needed mod?
~~~~ Have an EXCEL-ent Day!! ~~~~
Nick Gasmena - nickg@4x4jeep.net
-----------------------
Http://www.excelir.com/greatrates - Your gateway to Financial Freedom!
Home Office: 602-595-7734 Cell: 602-400-8896
-----------------------
My Jeep Pictures - http://www.azvjc.org/Gallery/View.asp?U=1637
My 4x4 Site - Http://www.4x4jeep.net
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
62641 From: The Acuna Family <mkacuna@c...>
Date: Fri Aug 9, 2002 9:06am
Subject: Re: Need help extending rear sway bar links...
Is the rear swaybar really that necessary on a Wrangler? I took mine off my 98 Grand and can't even tell the difference on the road. Offroad I can tell because the rear flexes better.
Mike
----- Original Message -----
From: Nick Gasmena
To: Arizona Virtual Jeep Club
Sent: Friday, August 09, 2002 4:45 AM
Subject: [az_vjc] Need help extending rear sway bar links...
I was wondering if anyone would be interested in helping me cut, and extend my rear sway bar links... Anyone have a welder, and might be interested in helping me with a cheap, but well needed mod?
~~~~ Have an EXCEL-ent Day!! ~~~~
Nick Gasmena - nickg@4x4jeep.net
-----------------------
Http://www.excelir.com/greatrates - Your gateway to Financial Freedom!
Home Office: 602-595-7734 Cell: 602-400-8896
-----------------------
My Jeep Pictures - http://www.azvjc.org/Gallery/View.asp?U=1637
My 4x4 Site - Http://www.4x4jeep.net
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
62642 From: Jesus Chio <jchio@a...>
Date: Fri Aug 9, 2002 9:37am
Subject: Fw: Thought of the Day "Safety Glasses "
Its never an exageration when it comes to protect ourselves, you guys take
care and have a good weekend,
JC
----- Original Message -----
To: "Bronco Fix" <mail@b...>; "EBeast list" <EBeast@b...>;
"EBML List" <ebml@b...>; "SEB list" <S-EEarlyBroncos@yahoogroups.com>
Sent: Friday, August 09, 2002 11:30 AM
Subject: Thought of the Day "Safety Glasses "
> I am sitting here with my eyballs dialated to the size of saucers because
I didnt wear my safety glasses when blowing away some welding debris. I
didnt think anything of it when I picked up the blower nozzle and went to
town on the dust but I guess hindsight is 20/20. Please wear your safety
glasses when you do any grinding ,sanding or just blowing off debris so you
dont end up like me.
> It took 2 trips to the doctor as my primary care doctor couldnt get the
piece of steel out so I had to go to a specialist and now I am wearing
sunglasses inside the house with all the lights out and it still burns like
hell.If just 1 person takes this advice it is worth it,
>
> Be safe
62643 From: Joe Kearney <Joe-CJ7@j...>
Date: Fri Aug 9, 2002 9:39am
Subject: Re: Fw: Thought of the Day "Safety Glasses "
Thanks JC.
It is a good point to remind ourselves about safety. We all work on our
rigs and other things like yard work (yeah I know it takes time away from
our Jeeps) but even then I wear safety classes when I mow and trim.
Everyone be safe.
Joe Kearney
----- Original Message -----
From: "Jesus Chio" <jchio@a...>
To: <az_vjc@yahoogroups.com>
Sent: Friday, August 09, 2002 9:37 AM
Subject: [az_vjc] Fw: Thought of the Day "Safety Glasses "
> Its never an exageration when it comes to protect ourselves, you guys take
> care and have a good weekend,
>
> JC
>
>
> ----- Original Message -----
> To: "Bronco Fix" <mail@b...>; "EBeast list" <EBeast@b...>;
> "EBML List" <ebml@b...>; "SEB list"
<S-EEarlyBroncos@yahoogroups.com>
> Sent: Friday, August 09, 2002 11:30 AM
> Subject: Thought of the Day "Safety Glasses "
>
>
> > I am sitting here with my eyballs dialated to the size of saucers
because
> I didnt wear my safety glasses when blowing away some welding debris. I
> didnt think anything of it when I picked up the blower nozzle and went to
> town on the dust but I guess hindsight is 20/20. Please wear your safety
> glasses when you do any grinding ,sanding or just blowing off debris so
you
> dont end up like me.
> > It took 2 trips to the doctor as my primary care doctor couldnt get the
> piece of steel out so I had to go to a specialist and now I am wearing
> sunglasses inside the house with all the lights out and it still burns
like
> hell.If just 1 person takes this advice it is worth it,
> >
> > Be safe
>
>
>
>
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
62644 From: Scott Kruize <skruize@c...>
Date: Fri Aug 9, 2002 9:41am
Subject: RE: Need help extending rear sway bar links...
Mike,
I'm running 5.5" coils and 37's. I run the Currie AR in the front and the rear sway with heims. I would never go back. The additional stability on the trail is hands down detter than running without. I have no fear of off camber obstacles like White Line with the Antirock. Does it limit my articulation? Well if it does I still outflexed all the other TJ's at the BBQ so I don't consider it a limitation.
Later,
Scott K
-----Original Message-----
From: The Acuna Family [mailto:mkacuna@cox.net]
Sent: Friday, August 09, 2002 9:07 AM
To: Arizona Virtual Jeep Club; Nick Gasmena
Subject: Re: [az_vjc] Need help extending rear sway bar links...
Is the rear swaybar really that necessary on a Wrangler? I took mine off my 98 Grand and can't even tell the difference on the road. Offroad I can tell because the rear flexes better.
Mike
----- Original Message -----
From: Nick Gasmena
To: Arizona Virtual Jeep Club
Sent: Friday, August 09, 2002 4:45 AM
Subject: [az_vjc] Need help extending rear sway bar links...
I was wondering if anyone would be interested in helping me cut, and extend my rear sway bar links... Anyone have a welder, and might be interested in helping me with a cheap, but well needed mod?
~~~~ Have an EXCEL-ent Day!! ~~~~
Nick Gasmena - nickg@4x4jeep.net
-----------------------
Http://www.excelir.com/greatrates - Your gateway to Financial Freedom!
Home Office: 602-595-7734 Cell: 602-400-8896
-----------------------
My Jeep Pictures - http://www.azvjc.org/Gallery/View.asp?U=1637
My 4x4 Site - Http://www.4x4jeep.net
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
62645 From: DesertJeep <joey@d...>
Date: Fri Aug 9, 2002 9:42am
Subject: RE: Fw: Thought of the Day "Safety Glasses "
Wow. Thanks for that bit of advice Jesus. I never really thought about
wearing glasses after I finished cutting or what ever and then blow away
the debris.
Joey K
93YJ
-----Original Message-----
From: Jesus Chio [mailto:jchio@a...]
Sent: Friday, August 09, 2002 9:37 AM
To: az_vjc@yahoogroups.com
Subject: [az_vjc] Fw: Thought of the Day "Safety Glasses "
Its never an exageration when it comes to protect ourselves, you guys
take care and have a good weekend,
JC
----- Original Message -----
To: "Bronco Fix" <mail@b...>; "EBeast list"
<EBeast@b...>; "EBML List" <ebml@b...>; "SEB list"
<S-EEarlyBroncos@yahoogroups.com>
Sent: Friday, August 09, 2002 11:30 AM
Subject: Thought of the Day "Safety Glasses "
> I am sitting here with my eyballs dialated to the size of saucers
> because
I didnt wear my safety glasses when blowing away some welding debris. I
didnt think anything of it when I picked up the blower nozzle and went
to town on the dust but I guess hindsight is 20/20. Please wear your
safety glasses when you do any grinding ,sanding or just blowing off
debris so you dont end up like me.
> It took 2 trips to the doctor as my primary care doctor couldnt get
> the
piece of steel out so I had to go to a specialist and now I am wearing
sunglasses inside the house with all the lights out and it still burns
like hell.If just 1 person takes this advice it is worth it,
>
> Be safe
Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
62646 From: David Withers <dr_ww@h...>
Date: Fri Aug 9, 2002 9:46am
Subject: lunch anyone
chuy's is sounding good
David
__________________________________________________ _______________
Send and receive Hotmail on your mobile device: http://mobile.msn.com
62647 From: jeepin_in_az <jeepin_in_az@y...>
Date: Fri Aug 9, 2002 9:46am
Subject: Re: lunch anyone
What side of town?
Mike
--- In az_vjc@y..., "David Withers" <dr_ww@h...> wrote:
>
> chuy's is sounding good
>
> David
>
>
> __________________________________________________ _______________
> Send and receive Hotmail on your mobile device:
http://mobile.msn.com
62648 From: tom lafrance <tlafrance@j...>
Date: Fri Aug 9, 2002 9:46am
Subject: BBS and the big "O"
Doug Ballard for President
Sharky for Vice President
Bill Mish for secretary
Davis Withers for public relations specialist
JW for BBS sysop
:-)
Tom
62649 From: David Withers <dr_ww@h...>
Date: Fri Aug 9, 2002 9:48am
Subject: TJ twisting counterclockwise under acceleration? Help!!!!
David Withers
480.215.6992
__________________________________________________ _______________
Send and receive Hotmail on your mobile device: http://mobile.msn.com
62650 From: David Withers <dr_ww@h...>
Date: Fri Aug 9, 2002 9:48am
Subject: TJ twisting counterclockwise under acceleration? Help!!!!
David Withers
480.215.6992
__________________________________________________ _______________
Chat with friends online, try MSN Messenger: http://messenger.msn.com
62651 From: Roger Tomas <tomasr@a...>
Date: Fri Aug 9, 2002 9:48am
Subject: Re: Saturday Morning Predator
I would if I could. But I can't. So I won't.
;-)
Scott has a really sweet rig. Together with Bill's, this would even be
a good run for spectators.
-Roger
Bill Mish wrote:
> Hey all,
> I was thinking about going on the Predator run this Saturday morning with
> Scott McMillan.
> Anyone else besides Tom Le going?
> If you have seen the trail and think you can make it, now would be a good
> time to try.
>
> Bill Mish
> 1955 Willys CJ3B
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
62652 From: Joe Kearney <Joe-CJ7@j...>
Date: Fri Aug 9, 2002 9:50am
Subject: Re: BBS and the big "O"
And we can not forget Tom LaFrance as the CTO Chief Training Officer
and Stu Olson as the CJTO Chief Jeep Technical Office.
Joe K.
----- Original Message -----
From: "tom lafrance" <tlafrance@j...>
To: <az_vjc@yahoogroups.com>
Sent: Friday, August 09, 2002 9:46 AM
Subject: [az_vjc] BBS and the big "O"
> Doug Ballard for President
> Sharky for Vice President
> Bill Mish for secretary
> Davis Withers for public relations specialist
> JW for BBS sysop
>
> :-)
>
> Tom
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
62653 From: Siade, Randy <randy.siade@u...>
Date: Fri Aug 9, 2002 9:52am
Subject: RE: Re: lunch anyone
I am interested if on the east side.
-----Original Message-----
From: jeepin_in_az [mailto:jeepin_in_az@y...]
Sent: Friday, August 09, 2002 9:47 AM
To: az_vjc@yahoogroups.com
Subject: [az_vjc] Re: lunch anyone
What side of town?
Mike
--- In az_vjc@y..., "David Withers" <dr_ww@h...> wrote:
>
> chuy's is sounding good
>
> David
>
>
> __________________________________________________ _______________
> Send and receive Hotmail on your mobile device:
http://mobile.msn.com
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
62654 From: Roger Tomas <tomasr@a...>
Date: Fri Aug 9, 2002 9:59am
Subject: Re: Coversion to Bulletin Board type Forum
I definitely agree with Bill. The forced exposure to all posted topics
is a good thing. A better-informed membership is a good thing not
only for our club but also for our sport in general.
-Roger
Bill Mish wrote:
> Ok, Hogan, not that I would try to force feed someone a Land issue, but I
> will use it to illustrate my point.
> How many of the people do you think you would reach that were only
> interested in modifying their Jeep, and completely oblivious to the need to
> protect their sport?
> Here, you post to the whole group no matter what.
> Sure some wont be interested.
> BFD.
> Some will get caught up in the "rallying the troops" and go just to check it
> out, or write that letter or whatever.
> Keeping your finger on the pulse of the Jeeping community is pretty
> important.
>
> You get a better feeling for the fellow "Virtual" members of the club with
> one group.
> BB's lend themselves to cliques, more so than this format.
> BB's lend themselves well to giving you just what you want.
> One thing to remember, The more you modify something, the more "Special
> purpose" it becomes.
> I think this rings true for Jeeps and oddly enough, this group.
> In the groups case, I don't think "Special Purpose" is going to fit the
> majority.
>
> Have a good one!
>
> Bill Mish
> 1955 Willys CJ3B
62655 From: pebble007 <jawooten@c...>
Date: Fri Aug 9, 2002 10:02am
Subject: Re: lunch anyone
I'm down with Chuy's in tempe - I cannot seem to remember exactly
where it is though..about 11:30 or so
later,
Josh Wooten
99TJ
--- In az_vjc@y..., "Siade, Randy" <randy.siade@u...> wrote:
> I am interested if on the east side.
>
> -----Original Message-----
> From: jeepin_in_az [mailto:jeepin_in_az@y...]
> Sent: Friday, August 09, 2002 9:47 AM
> To: az_vjc@y...
> Subject: [az_vjc] Re: lunch anyone
>
>
> What side of town?
>
>
> Mike
>
>
> --- In az_vjc@y..., "David Withers" <dr_ww@h...> wrote:
> >
> > chuy's is sounding good
> >
> > David
> >
> >
> > __________________________________________________ _______________
> > Send and receive Hotmail on your mobile device:
> http://mobile.msn.com
>
>
>
>
> Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
62656 From: richard logan <rlogan@d...>
Date: Fri Aug 9, 2002 10:06am
Subject: east side lunch
How about Chuy's
Richard Logan
VP Sales & Marketing
DialResults, Inc.
1833 W. Main Street Mesa AZ 85201 USA
888-839-3613 928-380-3855
rlogan@dialresults.com
Add this card to your address book
--------------------------------------------------------------------------------
Upgrade OutlookŪ - Add COLOR to your Emails
OutlookŪ is a registered trademark of Microsoft Corporation
62657 From: Mike Baney <jeepin_in_az@y...>
Date: Fri Aug 9, 2002 10:04am
Subject: RE: Re: lunch anyone
I could possibly swing that....where at on the east side Randy?
Mike
--- "Siade, Randy" <randy.siade@u...> wrote:
> I am interested if on the east side.
>
> -----Original Message-----
> From: jeepin_in_az [mailto:jeepin_in_az@y...]
> Sent: Friday, August 09, 2002 9:47 AM
> To: az_vjc@yahoogroups.com
> Subject: [az_vjc] Re: lunch anyone
>
>
> What side of town?
>
>
> Mike
>
>
> --- In az_vjc@y..., "David Withers" <dr_ww@h...> wrote:
> >
> > chuy's is sounding good
> >
> > David
> >
> >
> > __________________________________________________ _______________
> > Send and receive Hotmail on your mobile device:
> http://mobile.msn.com
>
>
>
>
> Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
>
__________________________________________________
Do You Yahoo!?
HotJobs - Search Thousands of New Jobs
http://www.hotjobs.com
62658 From: Joe Kearney <Joe-CJ7@j...>
Date: Fri Aug 9, 2002 10:05am
Subject: Re: lunch anyone
OK who is "IT" on the east side and will they be at lunch?
Good ploy to get rid of it.
Joe K.
----- Original Message -----
From: "David Withers" <dr_ww@h...>
To: <az_vjc@yahoogroups.com>
Sent: Friday, August 09, 2002 9:46 AM
Subject: [az_vjc] lunch anyone
>
> chuy's is sounding good
>
> David
>
>
> __________________________________________________ _______________
> Send and receive Hotmail on your mobile device: http://mobile.msn.com
>
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
62659 From: Robert McNeeley <fatbob309@e...>
Date: Fri Aug 9, 2002 10:15am
Subject: Re: lunch anyone
Can't tag people at a lunch or trail run.....
----- Original Message -----
From: "Joe Kearney" <Joe-CJ7@j...>
To: <az_vjc@yahoogroups.com>; "David Withers" <dr_ww@h...>
Sent: Friday, August 09, 2002 10:05 AM
Subject: Re: [az_vjc] lunch anyone
> OK who is "IT" on the east side and will they be at lunch?
> Good ploy to get rid of it.
>
> Joe K.
>
>
> ----- Original Message -----
> From: "David Withers" <dr_ww@h...>
> To: <az_vjc@yahoogroups.com>
> Sent: Friday, August 09, 2002 9:46 AM
> Subject: [az_vjc] lunch anyone
>
>
> >
> > chuy's is sounding good
> >
> > David
> >
> >
> > __________________________________________________ _______________
> > Send and receive Hotmail on your mobile device: http://mobile.msn.com
> >
> >
> >
> >
> > Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
> >
> >
> >
>
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
62660 From: Siade, Randy <randy.siade@u...>
Date: Fri Aug 9, 2002 10:10am
Subject: RE: east side lunch
I will be there.
-----Original Message-----
From: richard logan [mailto:rlogan@dialresults.com]
Sent: Friday, August 09, 2002 10:06 AM
To: az_vjc@yahoogroups.com
Subject: [az_vjc] east side lunch
How about Chuy's
Richard Logan
VP Sales & Marketing
DialResults, Inc.
1833 W. Main Street Mesa AZ 85201 USA
888-839-3613 928-380-3855
rlogan@dialresults.com
Add this card to your address book
--------------------------------------------------------------------------------
Upgrade OutlookŪ - Add COLOR to your Emails
OutlookŪ is a registered trademark of Microsoft Corporation
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
62636 From: jeepin_in_az <jeepin_in_az@y...>
Date: Fri Aug 9, 2002 9:04am
Subject: Re: Body Lift
Depends on your age, most women like to just lift certain parts of
the body, and cost is pretty high on those parts....:)
Seriously, if you do a body lift on your CJ, or any Jeep, try to keep
it at 1". Are you looking for more clearance for tires?
Mike Baney
--- In az_vjc@y..., "Joe Kearney" <Joe-CJ7@j...> wrote:
> I am thinking about getting a body lift. Does anyone recommend it
or have any opinion about them?
>
> I was thinking about a 1" body lift.
>
> Joe Kearney
> Joe-CJ7@J...
--------------------------------------------------------------------------------
ADVERTISEMENT
62637 From: Siade, Randy <randy.siade@u...>
Date: Fri Aug 9, 2002 9:07am
Subject: RE: Does your Jeep slouch?
All Vehicles seem to do this. It is most noticeable in Jeeps a trucks as you
lift them. Most of the time you see them lean anywere from 1/2" to 3/4". My
CJ leans to the passenger side by 3/4"
-----Original Message-----
From: tweakeraz [mailto:nklussier2@a...]
Sent: Friday, August 09, 2002 8:49 AM
To: az_vjc@yahoogroups.com
Subject: [az_vjc] Does your Jeep slouch?
Hey all,
I know that I do not post much, but it is tough to help others when
your own Jeep knowledge is limited. What the heck, I learn more as I
go along. I have a 2000 Tj and have noticed that the passenger side
sags quite a bit compared to the driver side. As I look around, I
have noticed that a large amount of Jeeps in general do too. Just
not to the extent my own is. My baby is not factory anymore so I am
wondering also if my suspension somehow could be affecting the sag.
I am running a RE Long Arm kit. I guess my question would be
something like, " Does or did your Jeep experience this type of
problem and what have you done to remedy it?" I though about the
adjustable coil spacers, but ONLY on the passenger seems odd.
Couldn't that change how my suspension is supposed to work? Any and
all input is greatly appreciated.
Nathan Lussier
Kingman, AZ
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
62638 From: Chatfield, Mike <Mike@A...>
Date: Fri Aug 9, 2002 9:20am
Subject: RE: Does your Jeep slouch?
My Jeep will lean one way after running a trail and then a different way
after running another trail...
-----Original Message-----
From: Siade, Randy [mailto:randy.siade@u...]
Sent: Friday, August 09, 2002 9:07 AM
To: 'tweakeraz'; az_vjc@yahoogroups.com
Subject: RE: [az_vjc] Does your Jeep slouch?
All Vehicles seem to do this. It is most noticeable in Jeeps a trucks as you
lift them. Most of the time you see them lean anywere from 1/2" to 3/4". My
CJ leans to the passenger side by 3/4"
62639 From: DesertJeep <joey@d...>
Date: Fri Aug 9, 2002 9:21am
Subject: RE: Body Lift
Don't forget a motor mount lift too. Not necessary but recommended. Specially for a TJ to get the oil pan up a bit more.
I have a hockey puck lift. And am now wanting to go to something a bit more solid. The pucks are squishing. I think Daystar makes a body lift that replaces the factory bushings. That is the one I have been looking at because my factory bushings are very old.
Joey K
93YJ
-----Original Message-----
From: Joe Kearney [mailto:Joe-CJ7@jrkearney.com]
Sent: Friday, August 09, 2002 8:46 AM
To: Jeep Club
Subject: [az_vjc] Body Lift
I am thinking about getting a body lift. Does anyone recommend it or have any opinion about them?
I was thinking about a 1" body lift.
Joe Kearney
Joe-CJ7@JRKearney.com
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
62640 From: Scott Kruize <skruize@c...>
Date: Fri Aug 9, 2002 9:31am
Subject: RE: Need help extending rear sway bar links...
Nick,
Don't bother extending the stock ones. It is so easy to build a new set with heim joints and you get a bit of extra articulation. Shouldn't cost more than $50 to build and they are adjustable.
Check out:
http://www.stu-offroad.com/antirock/antirock-3.htm
Scott K
-----Original Message-----
From: Nick Gasmena [mailto:NickG@4x4Jeep.Net]
Sent: Friday, August 09, 2002 4:45 AM
To: Arizona Virtual Jeep Club
Subject: [az_vjc] Need help extending rear sway bar links...
I was wondering if anyone would be interested in helping me cut, and extend my rear sway bar links... Anyone have a welder, and might be interested in helping me with a cheap, but well needed mod?
~~~~ Have an EXCEL-ent Day!! ~~~~
Nick Gasmena - nickg@4x4jeep.net
-----------------------
Http://www.excelir.com/greatrates - Your gateway to Financial Freedom!
Home Office: 602-595-7734 Cell: 602-400-8896
-----------------------
My Jeep Pictures - http://www.azvjc.org/Gallery/View.asp?U=1637
My 4x4 Site - Http://www.4x4jeep.net
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
62641 From: The Acuna Family <mkacuna@c...>
Date: Fri Aug 9, 2002 9:06am
Subject: Re: Need help extending rear sway bar links...
Is the rear swaybar really that necessary on a Wrangler? I took mine off my 98 Grand and can't even tell the difference on the road. Offroad I can tell because the rear flexes better.
Mike
----- Original Message -----
From: Nick Gasmena
To: Arizona Virtual Jeep Club
Sent: Friday, August 09, 2002 4:45 AM
Subject: [az_vjc] Need help extending rear sway bar links...
I was wondering if anyone would be interested in helping me cut, and extend my rear sway bar links... Anyone have a welder, and might be interested in helping me with a cheap, but well needed mod?
~~~~ Have an EXCEL-ent Day!! ~~~~
Nick Gasmena - nickg@4x4jeep.net
-----------------------
Http://www.excelir.com/greatrates - Your gateway to Financial Freedom!
Home Office: 602-595-7734 Cell: 602-400-8896
-----------------------
My Jeep Pictures - http://www.azvjc.org/Gallery/View.asp?U=1637
My 4x4 Site - Http://www.4x4jeep.net
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
62642 From: Jesus Chio <jchio@a...>
Date: Fri Aug 9, 2002 9:37am
Subject: Fw: Thought of the Day "Safety Glasses "
Its never an exageration when it comes to protect ourselves, you guys take
care and have a good weekend,
JC
----- Original Message -----
To: "Bronco Fix" <mail@b...>; "EBeast list" <EBeast@b...>;
"EBML List" <ebml@b...>; "SEB list" <S-EEarlyBroncos@yahoogroups.com>
Sent: Friday, August 09, 2002 11:30 AM
Subject: Thought of the Day "Safety Glasses "
> I am sitting here with my eyballs dialated to the size of saucers because
I didnt wear my safety glasses when blowing away some welding debris. I
didnt think anything of it when I picked up the blower nozzle and went to
town on the dust but I guess hindsight is 20/20. Please wear your safety
glasses when you do any grinding ,sanding or just blowing off debris so you
dont end up like me.
> It took 2 trips to the doctor as my primary care doctor couldnt get the
piece of steel out so I had to go to a specialist and now I am wearing
sunglasses inside the house with all the lights out and it still burns like
hell.If just 1 person takes this advice it is worth it,
>
> Be safe
62643 From: Joe Kearney <Joe-CJ7@j...>
Date: Fri Aug 9, 2002 9:39am
Subject: Re: Fw: Thought of the Day "Safety Glasses "
Thanks JC.
It is a good point to remind ourselves about safety. We all work on our
rigs and other things like yard work (yeah I know it takes time away from
our Jeeps) but even then I wear safety classes when I mow and trim.
Everyone be safe.
Joe Kearney
----- Original Message -----
From: "Jesus Chio" <jchio@a...>
To: <az_vjc@yahoogroups.com>
Sent: Friday, August 09, 2002 9:37 AM
Subject: [az_vjc] Fw: Thought of the Day "Safety Glasses "
> Its never an exageration when it comes to protect ourselves, you guys take
> care and have a good weekend,
>
> JC
>
>
> ----- Original Message -----
> To: "Bronco Fix" <mail@b...>; "EBeast list" <EBeast@b...>;
> "EBML List" <ebml@b...>; "SEB list"
<S-EEarlyBroncos@yahoogroups.com>
> Sent: Friday, August 09, 2002 11:30 AM
> Subject: Thought of the Day "Safety Glasses "
>
>
> > I am sitting here with my eyballs dialated to the size of saucers
because
> I didnt wear my safety glasses when blowing away some welding debris. I
> didnt think anything of it when I picked up the blower nozzle and went to
> town on the dust but I guess hindsight is 20/20. Please wear your safety
> glasses when you do any grinding ,sanding or just blowing off debris so
you
> dont end up like me.
> > It took 2 trips to the doctor as my primary care doctor couldnt get the
> piece of steel out so I had to go to a specialist and now I am wearing
> sunglasses inside the house with all the lights out and it still burns
like
> hell.If just 1 person takes this advice it is worth it,
> >
> > Be safe
>
>
>
>
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
62644 From: Scott Kruize <skruize@c...>
Date: Fri Aug 9, 2002 9:41am
Subject: RE: Need help extending rear sway bar links...
Mike,
I'm running 5.5" coils and 37's. I run the Currie AR in the front and the rear sway with heims. I would never go back. The additional stability on the trail is hands down detter than running without. I have no fear of off camber obstacles like White Line with the Antirock. Does it limit my articulation? Well if it does I still outflexed all the other TJ's at the BBQ so I don't consider it a limitation.
Later,
Scott K
-----Original Message-----
From: The Acuna Family [mailto:mkacuna@cox.net]
Sent: Friday, August 09, 2002 9:07 AM
To: Arizona Virtual Jeep Club; Nick Gasmena
Subject: Re: [az_vjc] Need help extending rear sway bar links...
Is the rear swaybar really that necessary on a Wrangler? I took mine off my 98 Grand and can't even tell the difference on the road. Offroad I can tell because the rear flexes better.
Mike
----- Original Message -----
From: Nick Gasmena
To: Arizona Virtual Jeep Club
Sent: Friday, August 09, 2002 4:45 AM
Subject: [az_vjc] Need help extending rear sway bar links...
I was wondering if anyone would be interested in helping me cut, and extend my rear sway bar links... Anyone have a welder, and might be interested in helping me with a cheap, but well needed mod?
~~~~ Have an EXCEL-ent Day!! ~~~~
Nick Gasmena - nickg@4x4jeep.net
-----------------------
Http://www.excelir.com/greatrates - Your gateway to Financial Freedom!
Home Office: 602-595-7734 Cell: 602-400-8896
-----------------------
My Jeep Pictures - http://www.azvjc.org/Gallery/View.asp?U=1637
My 4x4 Site - Http://www.4x4jeep.net
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
62645 From: DesertJeep <joey@d...>
Date: Fri Aug 9, 2002 9:42am
Subject: RE: Fw: Thought of the Day "Safety Glasses "
Wow. Thanks for that bit of advice Jesus. I never really thought about
wearing glasses after I finished cutting or what ever and then blow away
the debris.
Joey K
93YJ
-----Original Message-----
From: Jesus Chio [mailto:jchio@a...]
Sent: Friday, August 09, 2002 9:37 AM
To: az_vjc@yahoogroups.com
Subject: [az_vjc] Fw: Thought of the Day "Safety Glasses "
Its never an exageration when it comes to protect ourselves, you guys
take care and have a good weekend,
JC
----- Original Message -----
To: "Bronco Fix" <mail@b...>; "EBeast list"
<EBeast@b...>; "EBML List" <ebml@b...>; "SEB list"
<S-EEarlyBroncos@yahoogroups.com>
Sent: Friday, August 09, 2002 11:30 AM
Subject: Thought of the Day "Safety Glasses "
> I am sitting here with my eyballs dialated to the size of saucers
> because
I didnt wear my safety glasses when blowing away some welding debris. I
didnt think anything of it when I picked up the blower nozzle and went
to town on the dust but I guess hindsight is 20/20. Please wear your
safety glasses when you do any grinding ,sanding or just blowing off
debris so you dont end up like me.
> It took 2 trips to the doctor as my primary care doctor couldnt get
> the
piece of steel out so I had to go to a specialist and now I am wearing
sunglasses inside the house with all the lights out and it still burns
like hell.If just 1 person takes this advice it is worth it,
>
> Be safe
Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
62646 From: David Withers <dr_ww@h...>
Date: Fri Aug 9, 2002 9:46am
Subject: lunch anyone
chuy's is sounding good
David
__________________________________________________ _______________
Send and receive Hotmail on your mobile device: http://mobile.msn.com
62647 From: jeepin_in_az <jeepin_in_az@y...>
Date: Fri Aug 9, 2002 9:46am
Subject: Re: lunch anyone
What side of town?
Mike
--- In az_vjc@y..., "David Withers" <dr_ww@h...> wrote:
>
> chuy's is sounding good
>
> David
>
>
> __________________________________________________ _______________
> Send and receive Hotmail on your mobile device:
http://mobile.msn.com
62648 From: tom lafrance <tlafrance@j...>
Date: Fri Aug 9, 2002 9:46am
Subject: BBS and the big "O"
Doug Ballard for President
Sharky for Vice President
Bill Mish for secretary
Davis Withers for public relations specialist
JW for BBS sysop
:-)
Tom
62649 From: David Withers <dr_ww@h...>
Date: Fri Aug 9, 2002 9:48am
Subject: TJ twisting counterclockwise under acceleration? Help!!!!
David Withers
480.215.6992
__________________________________________________ _______________
Send and receive Hotmail on your mobile device: http://mobile.msn.com
62650 From: David Withers <dr_ww@h...>
Date: Fri Aug 9, 2002 9:48am
Subject: TJ twisting counterclockwise under acceleration? Help!!!!
David Withers
480.215.6992
__________________________________________________ _______________
Chat with friends online, try MSN Messenger: http://messenger.msn.com
62651 From: Roger Tomas <tomasr@a...>
Date: Fri Aug 9, 2002 9:48am
Subject: Re: Saturday Morning Predator
I would if I could. But I can't. So I won't.
;-)
Scott has a really sweet rig. Together with Bill's, this would even be
a good run for spectators.
-Roger
Bill Mish wrote:
> Hey all,
> I was thinking about going on the Predator run this Saturday morning with
> Scott McMillan.
> Anyone else besides Tom Le going?
> If you have seen the trail and think you can make it, now would be a good
> time to try.
>
> Bill Mish
> 1955 Willys CJ3B
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
62652 From: Joe Kearney <Joe-CJ7@j...>
Date: Fri Aug 9, 2002 9:50am
Subject: Re: BBS and the big "O"
And we can not forget Tom LaFrance as the CTO Chief Training Officer
and Stu Olson as the CJTO Chief Jeep Technical Office.
Joe K.
----- Original Message -----
From: "tom lafrance" <tlafrance@j...>
To: <az_vjc@yahoogroups.com>
Sent: Friday, August 09, 2002 9:46 AM
Subject: [az_vjc] BBS and the big "O"
> Doug Ballard for President
> Sharky for Vice President
> Bill Mish for secretary
> Davis Withers for public relations specialist
> JW for BBS sysop
>
> :-)
>
> Tom
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
62653 From: Siade, Randy <randy.siade@u...>
Date: Fri Aug 9, 2002 9:52am
Subject: RE: Re: lunch anyone
I am interested if on the east side.
-----Original Message-----
From: jeepin_in_az [mailto:jeepin_in_az@y...]
Sent: Friday, August 09, 2002 9:47 AM
To: az_vjc@yahoogroups.com
Subject: [az_vjc] Re: lunch anyone
What side of town?
Mike
--- In az_vjc@y..., "David Withers" <dr_ww@h...> wrote:
>
> chuy's is sounding good
>
> David
>
>
> __________________________________________________ _______________
> Send and receive Hotmail on your mobile device:
http://mobile.msn.com
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
62654 From: Roger Tomas <tomasr@a...>
Date: Fri Aug 9, 2002 9:59am
Subject: Re: Coversion to Bulletin Board type Forum
I definitely agree with Bill. The forced exposure to all posted topics
is a good thing. A better-informed membership is a good thing not
only for our club but also for our sport in general.
-Roger
Bill Mish wrote:
> Ok, Hogan, not that I would try to force feed someone a Land issue, but I
> will use it to illustrate my point.
> How many of the people do you think you would reach that were only
> interested in modifying their Jeep, and completely oblivious to the need to
> protect their sport?
> Here, you post to the whole group no matter what.
> Sure some wont be interested.
> BFD.
> Some will get caught up in the "rallying the troops" and go just to check it
> out, or write that letter or whatever.
> Keeping your finger on the pulse of the Jeeping community is pretty
> important.
>
> You get a better feeling for the fellow "Virtual" members of the club with
> one group.
> BB's lend themselves to cliques, more so than this format.
> BB's lend themselves well to giving you just what you want.
> One thing to remember, The more you modify something, the more "Special
> purpose" it becomes.
> I think this rings true for Jeeps and oddly enough, this group.
> In the groups case, I don't think "Special Purpose" is going to fit the
> majority.
>
> Have a good one!
>
> Bill Mish
> 1955 Willys CJ3B
62655 From: pebble007 <jawooten@c...>
Date: Fri Aug 9, 2002 10:02am
Subject: Re: lunch anyone
I'm down with Chuy's in tempe - I cannot seem to remember exactly
where it is though..about 11:30 or so
later,
Josh Wooten
99TJ
--- In az_vjc@y..., "Siade, Randy" <randy.siade@u...> wrote:
> I am interested if on the east side.
>
> -----Original Message-----
> From: jeepin_in_az [mailto:jeepin_in_az@y...]
> Sent: Friday, August 09, 2002 9:47 AM
> To: az_vjc@y...
> Subject: [az_vjc] Re: lunch anyone
>
>
> What side of town?
>
>
> Mike
>
>
> --- In az_vjc@y..., "David Withers" <dr_ww@h...> wrote:
> >
> > chuy's is sounding good
> >
> > David
> >
> >
> > __________________________________________________ _______________
> > Send and receive Hotmail on your mobile device:
> http://mobile.msn.com
>
>
>
>
> Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
62656 From: richard logan <rlogan@d...>
Date: Fri Aug 9, 2002 10:06am
Subject: east side lunch
How about Chuy's
Richard Logan
VP Sales & Marketing
DialResults, Inc.
1833 W. Main Street Mesa AZ 85201 USA
888-839-3613 928-380-3855
rlogan@dialresults.com
Add this card to your address book
--------------------------------------------------------------------------------
Upgrade OutlookŪ - Add COLOR to your Emails
OutlookŪ is a registered trademark of Microsoft Corporation
62657 From: Mike Baney <jeepin_in_az@y...>
Date: Fri Aug 9, 2002 10:04am
Subject: RE: Re: lunch anyone
I could possibly swing that....where at on the east side Randy?
Mike
--- "Siade, Randy" <randy.siade@u...> wrote:
> I am interested if on the east side.
>
> -----Original Message-----
> From: jeepin_in_az [mailto:jeepin_in_az@y...]
> Sent: Friday, August 09, 2002 9:47 AM
> To: az_vjc@yahoogroups.com
> Subject: [az_vjc] Re: lunch anyone
>
>
> What side of town?
>
>
> Mike
>
>
> --- In az_vjc@y..., "David Withers" <dr_ww@h...> wrote:
> >
> > chuy's is sounding good
> >
> > David
> >
> >
> > __________________________________________________ _______________
> > Send and receive Hotmail on your mobile device:
> http://mobile.msn.com
>
>
>
>
> Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
>
__________________________________________________
Do You Yahoo!?
HotJobs - Search Thousands of New Jobs
http://www.hotjobs.com
62658 From: Joe Kearney <Joe-CJ7@j...>
Date: Fri Aug 9, 2002 10:05am
Subject: Re: lunch anyone
OK who is "IT" on the east side and will they be at lunch?
Good ploy to get rid of it.
Joe K.
----- Original Message -----
From: "David Withers" <dr_ww@h...>
To: <az_vjc@yahoogroups.com>
Sent: Friday, August 09, 2002 9:46 AM
Subject: [az_vjc] lunch anyone
>
> chuy's is sounding good
>
> David
>
>
> __________________________________________________ _______________
> Send and receive Hotmail on your mobile device: http://mobile.msn.com
>
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
62659 From: Robert McNeeley <fatbob309@e...>
Date: Fri Aug 9, 2002 10:15am
Subject: Re: lunch anyone
Can't tag people at a lunch or trail run.....
----- Original Message -----
From: "Joe Kearney" <Joe-CJ7@j...>
To: <az_vjc@yahoogroups.com>; "David Withers" <dr_ww@h...>
Sent: Friday, August 09, 2002 10:05 AM
Subject: Re: [az_vjc] lunch anyone
> OK who is "IT" on the east side and will they be at lunch?
> Good ploy to get rid of it.
>
> Joe K.
>
>
> ----- Original Message -----
> From: "David Withers" <dr_ww@h...>
> To: <az_vjc@yahoogroups.com>
> Sent: Friday, August 09, 2002 9:46 AM
> Subject: [az_vjc] lunch anyone
>
>
> >
> > chuy's is sounding good
> >
> > David
> >
> >
> > __________________________________________________ _______________
> > Send and receive Hotmail on your mobile device: http://mobile.msn.com
> >
> >
> >
> >
> > Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
> >
> >
> >
>
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
62660 From: Siade, Randy <randy.siade@u...>
Date: Fri Aug 9, 2002 10:10am
Subject: RE: east side lunch
I will be there.
-----Original Message-----
From: richard logan [mailto:rlogan@dialresults.com]
Sent: Friday, August 09, 2002 10:06 AM
To: az_vjc@yahoogroups.com
Subject: [az_vjc] east side lunch
How about Chuy's
Richard Logan
VP Sales & Marketing
DialResults, Inc.
1833 W. Main Street Mesa AZ 85201 USA
888-839-3613 928-380-3855
rlogan@dialresults.com
Add this card to your address book
--------------------------------------------------------------------------------
Upgrade OutlookŪ - Add COLOR to your Emails
OutlookŪ is a registered trademark of Microsoft Corporation
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.