parts to finish project

[ROCRWLR]

I need to buy a few more parts to finish my YJ, figured I would check here first.

1. rear CV shaft
2. front CV shaft out of an XJ to use for my front shaft
3. shocks to use with my SOA
4. extended front brake lines.
5. exhaust manifold for 93 YJ
5. drop pitman arm
1.5" wheel spacers


Dean

[Turtle]

Dean,

I know I have ONE... lol maybe 2 1.5" wheel spacers. They are 5x4.5. Might need new studs... I will see if I can find the second one. If I have the pair maybe I will trade ya for the carrier : ) Assumin' that sounds fair to ya!

Also, about the front brake lines... I would look around... I read a deal on the original AZVJC site in the "TECH" section that helped me alot. It suggested a different brake line to use. I can't remember exactly what it was off of, but I used them and they are plenty long and work fine with my longarm front. Plus they were much cheaper then SS lines and bolted right on... about $15 a piece if I remember right...

Turtle

[Turtle]

http://www.cataclysm.net:8080/oldsite/Tech/View.asp?ID=358

There ya go... says its for CJ's, but I used them on my TJ with NO problems!

[ademster]

I have a CV Rear shaft...

send me a pm with the running length you need and I will measure mine to see if it will work for you...

[Fire Ball]

I have a dropped pitman arm for a CJ. Wasn't clocked right for my TJ. You could see if it will work