PDA

View Full Version : Need drill + drill bit

Washington_XJ
10-10-2007, 11:27 AM
Anybody have one on the west side I can use for a day? I need to punch a few holes through my front bumper to mount the hi-lift jack mounts. I think its a 3/8" hole but I'll double check.

If somebody would rather come over and help me that works too.
JCSXJ
10-10-2007, 11:39 AM
I'm on the west side and have said drill and drill bit. I don't get home until about 5pm.....let me know.
Billy 4 hp
10-10-2007, 06:58 PM
Anybody have one on the west side I can use for a day? I need to punch a few holes through my front bumper to mount the hi-lift jack mounts. I think its a 3/8" hole but I'll double check.

If somebody would rather come over and help me that works too.

www.harborfreight.com

:eek:

Less than $20.00 and you'll have your own basic set with a 3/8 drill to boot, it may only work once or twice but at least it will be your own....
Fire Ball
10-10-2007, 07:21 PM
If you are drilling larger holes in steel, the stepped drills work great. You can get sets at Home depot or even cheaper at Harbor Freight or A to Z tools (Another discount tool place)

I got a decent set of 3 for $17. Same set home depot had for $40
BeaterXJ
10-10-2007, 07:45 PM
I've got the drills and bits you need @ the shop, if you need them still you are more then welcome to swing by and use them:D
Washington_XJ
10-10-2007, 08:16 PM
I'm on the west side and have said drill and drill bit. I don't get home until about 5pm.....let me know.
I've got the drills and bits you need @ the shop, if you need them still you are more then welcome to swing by and use them:D

Cool thanks. I thought I was going to do it today but yea. Jeep got broken into. Most likely this weekend or Monday