blooddrive
01-02-2004, 04:19 PM
1283-1303 of 96453 | Previous | Next [ First | Last ] Msg # Date | Thread
1283 From: Scott Kruize <OSMTJ@p...>
Date: Fri Jun 18, 1999 11:51pm
Subject: Re: Proposed 6/25 Lockett Meadow/Cinders
I agree with Doug. Next week is too short of notice. I'm for going on 7/9.
Scott Kruize
OSMTJ@p...
-----Original Message-----
From: DougB <daballard@p...>
To: Revolvr@a... <Revolvr@a...>; az_vjc@egroups.com
<az_vjc@egroups.com>
Date: Friday, June 18, 1999 10:36 PM
Subject: [az_vjc] Re: Proposed 6/25 Lockett Meadow/Cinders
I'd love to do this one, but probably can't on the can't on the 25th. July 9
is great w/ me.
Doug
-----Original Message-----
From: Revolvr@a... <Revolvr@a...>
To: az_vjc@egroups.com <az_vjc@egroups.com>
Date: Friday, June 18, 1999 9:08 PM
Subject: [az_vjc] Proposed 6/25 Lockett Meadow/Cinders
Is anyone planning to go on this trip? The proposed date is Fri 6/25. An
alternate date would be 7/9.
-- Dan
-------------------
I highly recommend camping at Lockett Meadow if we go wheeling at the
Cinders. This is a great place at the foot of the Inner Basin, very close to
the Cinders, in a scenic Aspen forest, at about 8500 feet.
The camping is considered primitive, with no facilities, although there is
one outhouse near the hiking trailhead. The Trailhead leads into the Inner
Basin and offers some great hiking. You can even connect to the Weatherford
Trail which will get you to the summit of Mt. Humphrey's.
I would recommend a trip the week before or the week after 4th of July to
avoid the crowds (6/25 or 7/9). Some of us could go on Friday afternoon to
pick a camp site. The camp sites are large enough for a good crowd. The best
camp sites are near the trailhead (and the outhouse). The weather will be
cool and nice.
I might be inclined to hike to the summit one day and go wheeling another
day. I tried to reach the summit last year about this time, but late snows
left the trails impassible above 10,000 feet without the right equipment.
'Course it was fun being waist deep in snow in June.
Any takers?
----------------------------------------------------------------------------
----
Click Here!
eGroups.com home: http://www.egroups.com/group/az_vjc
www.egroups.com - Simplifying group communications
------------------------------------------------------------------------
SIGN UP NOW FOR FREE HOME IMPROVEMENT HOW-TO'S
Receive seasonal how-to's and climate-specific advice via e-mail.
http://clickhere.egroups.com/click/131
eGroups.com home: http://www.egroups.com/group/az_vjc
http://www.egroups.com - Simplifying group communications
------------------------------------------------------------------------
eGroups.com home: http://www.egroups.com/group/az_vjc
http://www.egroups.com - Simplifying group communications
--------------------------------------------------------------------------------
ADVERTISEMENT
1284 From: Troy & Shannon Franks <tsfranks@i...>
Date: Fri Jun 18, 1999 11:44pm
Subject: found that rear end problem
I was going over the Wife's Jeep (Tonka) last night before we head out to the White tanks... I knew the rear ujoint was making noise, so I took a peek to see how much play it had in it....WOW... can you say lots....
went to the local parts store and picked up a the only thing they had...ELCHEAPO no name brand.. pulled her drive shaft, and 2 of the caps fell off on the very rear of the rear drive shaft... just the caps.. no bearings in them at all so last weekend Tonka ran the 4.0 trail with a VeRY bad ujoint. Spicer makes a real tuff ujoint to hold up to that kind of abuse. when we get a set of Six states drive shafts for her jeep I will demand nothing but Spicer (I think that is what they use anyway)
Now I just need Len to have Checkers carry them..
Troy
69 Waggy (Papa Tonka)
Shannon
88 Cherokee (Tonka)
--------------------------------------------------------------------------------
eGroups.com home: http://www.egroups.com/group/az_vjc
www.egroups.com - Simplifying group communications
1285 From: brian harmon <boh105@u...>
Date: Fri Jun 18, 1999 6:11pm
Subject: Re: [ Proposed 6/25 Lockett Meadow/Cinders]
7/9 would be good for some of us northern folk
have a chance to meet you all for the desert.
On the 25th we have to be out of town.
"DougB" <daballard@p...> wrote:
> ---------------------------------------------
> Attachment:
> MIME Type: multipart/alternative
> ---------------------------------------------
I'd love to do this one, but probably can't on the can't on the 25th. July 9
is great w/ me.
Doug
-----Original Message-----
From: Revolvr@a... <Revolvr@a...>
To: az_vjc@egroups.com <az_vjc@egroups.com>
Date: Friday, June 18, 1999 9:08 PM
Subject: [az_vjc] Proposed 6/25 Lockett Meadow/Cinders
Is anyone planning to go on this trip? The proposed date is Fri 6/25. An
alternate date would be 7/9.
-- Dan
-------------------
I highly recommend camping at Lockett Meadow if we go wheeling at the
Cinders. This is a great place at the foot of the Inner Basin, very close to
the Cinders, in a scenic Aspen forest, at about 8500 feet.
The camping is considered primitive, with no facilities, although there is
one outhouse near the hiking trailhead. The Trailhead leads into the Inner
Basin and offers some great hiking. You can even connect to the Weatherford
Trail which will get you to the summit of Mt. Humphrey's.
I would recommend a trip the week before or the week after 4th of July to
avoid the crowds (6/25 or 7/9). Some of us could go on Friday afternoon to
pick a camp site. The camp sites are large enough for a good crowd. The best
camp sites are near the trailhead (and the outhouse). The weather will be
cool and nice.
I might be inclined to hike to the summit one day and go wheeling another
day. I tried to reach the summit last year about this time, but late snows
left the trails impassible above 10,000 feet without the right equipment.
'Course it was fun being waist deep in snow in June.
Any takers?
--------------------------------------------------------------------------------
Click Here!
eGroups.com home: http://www.egroups.com/group/az_vjc
www.egroups.com - Simplifying group communications
------------------------------------------------------------------------
SIGN UP NOW FOR FREE HOME IMPROVEMENT HOW-TO'S
Receive seasonal how-to's and climate-specific advice via e-mail.
http://clickhere.egroups.com/click/131
eGroups.com home: http://www.egroups.com/group/az_vjc
http://www.egroups.com - Simplifying group communications
__________________________________________________ __________________
Get free e-mail and a permanent address at http://www.netaddress.com/?N=1
------------------------------------------------------------------------
eGroups.com home: http://www.egroups.com/group/az_vjc
http://www.egroups.com - Simplifying group communications
1286 From: James Junkin <jjunkin@p...>
Date: Sat Jun 19, 1999 10:38am
Subject: Re: found that rear end problem
I think NAPA carries spicer U-Joints
JJ
'81 Cherokee "Midnight" (4" Skyjacker, 33x12.5 AT's)
'98 TJ (Teraflexed, ARB's, 33x12.5 MT's etc., etc.)
'97 Teal J (Daughter's)
-----Original Message-----
From: Troy & Shannon Franks <tsfranks@inficad.com>
To: AZ Jeep <az_vjc@makelist.com>
Date: Saturday, June 19, 1999 12:40 AM
Subject: [az_vjc] found that rear end problem
I was going over the Wife's Jeep (Tonka) last night before we head out to the White tanks... I knew the rear ujoint was making noise, so I took a peek to see how much play it had in it....WOW... can you say lots....
went to the local parts store and picked up a the only thing they had...ELCHEAPO no name brand.. pulled her drive shaft, and 2 of the caps fell off on the very rear of the rear drive shaft... just the caps.. no bearings in them at all so last weekend Tonka ran the 4.0 trail with a VeRY bad ujoint. Spicer makes a real tuff ujoint to hold up to that kind of abuse. when we get a set of Six states drive shafts for her jeep I will demand nothing but Spicer (I think that is what they use anyway)
Now I just need Len to have Checkers carry them..
Troy
69 Waggy (Papa Tonka)
Shannon
88 Cherokee (Tonka)
--------------------------------------------------------------------------------
Click Here!
eGroups.com home: http://www.egroups.com/group/az_vjc
www.egroups.com - Simplifying group communications
--------------------------------------------------------------------------------
eGroups.com home: http://www.egroups.com/group/az_vjc
www.egroups.com - Simplifying group communications
1287 From: Ross Skinner <rskinner@s...>
Date: Sat Jun 19, 1999 3:54pm
Subject: Re: Proposed 6/25 Lockett Meadow/Cinders
7/9 is a possible for us. Sounds fun and we do a lot of hiking.
Ross & Deb Skinner
84 CJ7
Revolvr@a... wrote:
> Is anyone planning to go on this trip? The proposed date is Fri 6/25. An
> alternate date would be 7/9.
>
> -- Dan
>
> -------------------
> I highly recommend camping at Lockett Meadow if we go wheeling at the
> Cinders. This is a great place at the foot of the Inner Basin, very close to
> the Cinders, in a scenic Aspen forest, at about 8500 feet.
>
> The camping is considered primitive, with no facilities, although there is
> one outhouse near the hiking trailhead. The Trailhead leads into the Inner
> Basin and offers some great hiking. You can even connect to the Weatherford
> Trail which will get you to the summit of Mt. Humphrey's.
>
> I would recommend a trip the week before or the week after 4th of July to
> avoid the crowds (6/25 or 7/9). Some of us could go on Friday afternoon to
> pick a camp site. The camp sites are large enough for a good crowd. The best
> camp sites are near the trailhead (and the outhouse). The weather will be
> cool and nice.
>
> I might be inclined to hike to the summit one day and go wheeling another
> day. I tried to reach the summit last year about this time, but late snows
> left the trails impassible above 10,000 feet without the right equipment.
> 'Course it was fun being waist deep in snow in June.
>
> Any takers?
>
> ------------------------------------------------------------------------
> FREE email Newsletters delivered right to your in-box.
> CNET, USAToday, RollingStone, and more…
> Click Here Now! http://clickhere.egroups.com/click/314
>
> eGroups.com home: http://www.egroups.com/group/az_vjc
> http://www.egroups.com - Simplifying group communications
------------------------------------------------------------------------
eGroups.com home: http://www.egroups.com/group/az_vjc
http://www.egroups.com - Simplifying group communications
1288 From: DougB <daballard@p...>
Date: Sat Jun 19, 1999 4:15pm
Subject: TeraFlex 3" springs for TJ
I just upgraded my 3" springs for Tera's 4.5". They offer a trade in of $120 for the 3" springs, so I was about to ship them back for the credit, when I thought I'd offer these to anyone in the group, for the same price that TeraFlex was going to give me for them...$120. Let me know if anyone's interested, since I'll probably be shipping them out next week sometime.
Doug
--------------------------------------------------------------------------------
eGroups.com home: http://www.egroups.com/group/az_vjc
www.egroups.com - Simplifying group communications
1289 From: DougB <daballard@p...>
Date: Sat Jun 19, 1999 4:23pm
Subject: Drive Line shop
Anyone know of a good drive line shop in the east valley? I dented my front one and need to get it rebalanced. TIA
Doug
--------------------------------------------------------------------------------
eGroups.com home: http://www.egroups.com/group/az_vjc
www.egroups.com - Simplifying group communications
1290 From: <jeffm@d...>
Date: Sat Jun 19, 1999 5:40pm
Subject: Re: Drive Line shop
I know it's not east valley, but Driveline Service of Arizona (on Washington
between 36th st and the highway 143) builds new and rebuilds existing
driveshafts. I had a custom driveshaft built for my XJ from them ... quick
and very good quality.
Jeff
<002801bebaaa$c064f100$6cf4fdd-@pavilion> wrote:
Original Article: http://www.egroups.com/group/az_vjc/?start=1289
> Anyone know of a good drive line shop in the east valley? I dented my front one and need to get it rebalanced. TIA
>
> Doug
>
>
------------------------------------------------------------------------
eGroups.com home: http://www.egroups.com/group/az_vjc
http://www.egroups.com - Simplifying group communications
1291 From: <yjeric@m...>
Date: Sat Jun 19, 1999 7:08pm
Subject: White Tanks trip/ Catapiller Proving Grounds
Thanks to all who where on the White Tanks trail today I had a good time. Does anyone know anything about the Catapiller Proving Grounds? I heard a rumor that there is access to it?
------------------------------------------------------------------------
eGroups.com home: http://www.egroups.com/group/az_vjc
http://www.egroups.com - Simplifying group communications
1292 From: Joseph Clarke <azzonie@m...>
Date: Sat Jun 19, 1999 7:17pm
Subject: Re: White Tanks trip/ Catapiller Proving Grounds
Yes , White Tanks was fun. If the trail is expanded I'ld like to do it
again. Thanks to everyone.
----- Original Message -----
From: <yjeric@m...>
To: <az_vjc@eGroups.com>
Sent: Saturday, June 19, 1999 7:08 PM
Subject: [az_vjc] White Tanks trip/ Catapiller Proving Grounds
> Thanks to all who where on the White Tanks trail today I had a good time.
Does anyone know anything about the Catapiller Proving Grounds? I heard a
rumor that there is access to it?
>
>
> ------------------------------------------------------------------------
> SIGN UP NOW FOR FREE HOME IMPROVEMENT HOW-TO'S
> Receive seasonal how-to's and climate-specific advice via e-mail.
> http://clickhere.egroups.com/click/131
>
>
> eGroups.com home: http://www.egroups.com/group/az_vjc
> http://www.egroups.com - Simplifying group communications
>
>
>
>
------------------------------------------------------------------------
eGroups.com home: http://www.egroups.com/group/az_vjc
http://www.egroups.com - Simplifying group communications
1293 From: DougB <daballard@p...>
Date: Sat Jun 19, 1999 7:24pm
Subject: Re: Drive Line shop
Thanks. 4 Wheeler Supply also recommends them. I'll probably give them a call Monday.
Doug
-----Original Message-----
From: jeffm@desertwave.com <jeffm@desertwave.com>
To: az_vjc@eGroups.com <az_vjc@eGroups.com>
Date: Saturday, June 19, 1999 5:40 PM
Subject: [az_vjc] Re: Drive Line shop
I know it's not east valley, but Driveline Service of Arizona (on Washington
between 36th st and the highway 143) builds new and rebuilds existing
driveshafts. I had a custom driveshaft built for my XJ from them ... quick
and very good quality.
Jeff
<002801bebaaa$c064f100$6cf4fdd-@pavilion> wrote:
Original Article: http://www.egroups.com/group/az_vjc/?start=1289
> Anyone know of a good drive line shop in the east valley? I dented my front one and need to get it rebalanced. TIA
>
> Doug
>
>
--------------------------------------------------------------------------------
Click Here!
eGroups.com home: http://www.egroups.com/group/az_vjc
www.egroups.com - Simplifying group communications
--------------------------------------------------------------------------------
eGroups.com home: http://www.egroups.com/group/az_vjc
www.egroups.com - Simplifying group communications
1294 From: Len Sullivan <kermit@f...>
Date: Sat Jun 19, 1999 7:05pm
Subject: Re: White Tanks trip/ Catapiller Proving Grounds
To all that made the run today, I have for you the same reaction that I
received when I showed my friends the pictures of my truck going through the
lower section of that wash..............YOU GUYS ARE EXTREME!!!!!!! I loved
it, even though I went "Jeep-less" today.
Hope to see you all again soon.........
-Len Sullivan 1978 J-10
-FSJ List Administrator
-Phoenix, AZ ICQ# 38601959
-----Original Message-----
From: Joseph Clarke <azzonie@m...>
To: az_vjc@egroups.com <az_vjc@egroups.com>
Date: Saturday, June 19, 1999 7:20 PM
Subject: [az_vjc] Re: White Tanks trip/ Catapiller Proving Grounds
>Yes , White Tanks was fun. If the trail is expanded I'ld like to do it
>again. Thanks to everyone.
>----- Original Message -----
>From: <yjeric@m...>
>To: <az_vjc@eGroups.com>
>Sent: Saturday, June 19, 1999 7:08 PM
>Subject: [az_vjc] White Tanks trip/ Catapiller Proving Grounds
>
>
>> Thanks to all who where on the White Tanks trail today I had a good time.
>Does anyone know anything about the Catapiller Proving Grounds? I heard a
>rumor that there is access to it?
>>
------------------------------------------------------------------------
eGroups.com home: http://www.egroups.com/group/az_vjc
http://www.egroups.com - Simplifying group communications
1295 From: David O'Boyle <doboyle@s...>
Date: Sat Jun 19, 1999 7:48pm
Subject: Re: TeraFlex 3" springs for TJ
Is that for all four corners???
Dave (azxj) 93xj sport
-----Original Message-----
From: DougB <daballard@prodigy.net>
To: Jeep AzVJC <az_vjc@makelist.com>
Date: Saturday, June 19, 1999 4:14 PM
Subject: [az_vjc] TeraFlex 3" springs for TJ
I just upgraded my 3" springs for Tera's 4.5". They offer a trade in of $120 for the 3" springs, so I was about to ship them back for the credit, when I thought I'd offer these to anyone in the group, for the same price that TeraFlex was going to give me for them...$120. Let me know if anyone's interested, since I'll probably be shipping them out next week sometime.
Doug
--------------------------------------------------------------------------------
Click here, user!
eGroups.com home: http://www.egroups.com/group/az_vjc
www.egroups.com - Simplifying group communications
--------------------------------------------------------------------------------
eGroups.com home: http://www.egroups.com/group/az_vjc
www.egroups.com - Simplifying group communications
1296 From: David O'Boyle <doboyle@s...>
Date: Sat Jun 19, 1999 7:49pm
Subject: Re: Drive Line shop
Dicks Drive shaft is on Mcdowell just west of 32nd st..
Dave (azxj) 93xj sport
-----Original Message-----
From: DougB <daballard@prodigy.net>
To: Jeep AzVJC <az_vjc@makelist.com>
Date: Saturday, June 19, 1999 4:22 PM
Subject: [az_vjc] Drive Line shop
Anyone know of a good drive line shop in the east valley? I dented my front one and need to get it rebalanced. TIA
Doug
--------------------------------------------------------------------------------
Click Here!
eGroups.com home: http://www.egroups.com/group/az_vjc
www.egroups.com - Simplifying group communications
--------------------------------------------------------------------------------
eGroups.com home: http://www.egroups.com/group/az_vjc
www.egroups.com - Simplifying group communications
1298 From: Matt Barker <azjeeps@h...>
Date: Sat Jun 19, 1999 0:59pm
Subject: Bolt snapped
Just took am quick run to a lake not that far away and while I was getting
up there the bolt that holds my front traction bar in place snapped! Just a
quick question to anyone out there. Do I really need to bolt that thing
back up or can I take it off completely? I've heard of others doing this,
just wanted to see if anyone here has done it or what there opions are.
Thanks,
Matt B.
__________________________________________________ _____________
Get Free Email and Do More On The Web. Visit http://www.msn.com
------------------------------------------------------------------------
eGroups.com home: http://www.egroups.com/group/az_vjc
http://www.egroups.com - Simplifying group communications
1299 From: David O'Boyle <doboyle@s...>
Date: Sat Jun 19, 1999 7:54pm
Subject: Re: White Tanks trip/ Catapiller Proving Grounds
Only if you know someone that works there.
Dave (azxj) 93xj sport
-----Original Message-----
From: yjeric@m... <yjeric@m...>
To: az_vjc@egroups.com <az_vjc@egroups.com>
Date: Saturday, June 19, 1999 7:08 PM
Subject: [az_vjc] White Tanks trip/ Catapiller Proving Grounds
>Thanks to all who where on the White Tanks trail today I had a good time.
Does anyone know anything about the Catapiller Proving Grounds? I heard a
rumor that there is access to it?
>
>
>------------------------------------------------------------------------
>SIGN UP NOW FOR FREE HOME IMPROVEMENT HOW-TO'S
>Receive seasonal how-to's and climate-specific advice via e-mail.
>http://clickhere.egroups.com/click/131
>
>
>eGroups.com home: http://www.egroups.com/group/az_vjc
>http://www.egroups.com - Simplifying group communications
>
>
>
>
------------------------------------------------------------------------
eGroups.com home: http://www.egroups.com/group/az_vjc
http://www.egroups.com - Simplifying group communications
1300 From: DougB <daballard@p...>
Date: Sat Jun 19, 1999 8:05pm
Subject: Re: TeraFlex 3" springs for TJ
Yup.
-----Original Message-----
From: David O'Boyle <doboyle@samaritan.edu>
To: az_vjc@egroups.com <az_vjc@egroups.com>
Date: Saturday, June 19, 1999 7:55 PM
Subject: [az_vjc] Re: TeraFlex 3" springs for TJ
Is that for all four corners???
Dave (azxj) 93xj sport
-----Original Message-----
From: DougB <daballard@prodigy.net>
To: Jeep AzVJC <az_vjc@makelist.com>
Date: Saturday, June 19, 1999 4:14 PM
Subject: [az_vjc] TeraFlex 3" springs for TJ
I just upgraded my 3" springs for Tera's 4.5". They offer a trade in of $120 for the 3" springs, so I was about to ship them back for the credit, when I thought I'd offer these to anyone in the group, for the same price that TeraFlex was going to give me for them...$120. Let me know if anyone's interested, since I'll probably be shipping them out next week sometime.
Doug
--------------------------------------------------------------------------------
Click here, user!
eGroups.com home: http://www.egroups.com/group/az_vjc
www.egroups.com - Simplifying group communications
--------------------------------------------------------------------------------
eGroups Spotlight:
Lightning Strike Survivor List - on-line support group
for lightning strike survivors and their families.
http://www.egroups.com/group/lightningstrike/info.html
eGroups.com home: http://www.egroups.com/group/az_vjc
www.egroups.com - Simplifying group communications
--------------------------------------------------------------------------------
eGroups.com home: http://www.egroups.com/group/az_vjc
www.egroups.com - Simplifying group communications
1301 From: David O'Boyle <doboyle@s...>
Date: Sat Jun 19, 1999 8:00pm
Subject: Re: TeraFlex 3" springs for TJ
I might know someone interested
let me call him and e-mail you back..
Dave (azxj) 93xj sport
-----Original Message-----
From: DougB <daballard@prodigy.net>
To: az_vjc@egroups.com <az_vjc@egroups.com>
Date: Saturday, June 19, 1999 8:03 PM
Subject: [az_vjc] Re: TeraFlex 3" springs for TJ
Yup.
-----Original Message-----
From: David O'Boyle <doboyle@samaritan.edu>
To: az_vjc@egroups.com <az_vjc@egroups.com>
Date: Saturday, June 19, 1999 7:55 PM
Subject: [az_vjc] Re: TeraFlex 3" springs for TJ
Is that for all four corners???
Dave (azxj) 93xj sport
-----Original Message-----
From: DougB <daballard@prodigy.net>
To: Jeep AzVJC <az_vjc@makelist.com>
Date: Saturday, June 19, 1999 4:14 PM
Subject: [az_vjc] TeraFlex 3" springs for TJ
I just upgraded my 3" springs for Tera's 4.5". They offer a trade in of $120 for the 3" springs, so I was about to ship them back for the credit, when I thought I'd offer these to anyone in the group, for the same price that TeraFlex was going to give me for them...$120. Let me know if anyone's interested, since I'll probably be shipping them out next week sometime.
Doug
--------------------------------------------------------------------------------
Click here, user!
eGroups.com home: http://www.egroups.com/group/az_vjc
www.egroups.com - Simplifying group communications
--------------------------------------------------------------------------------
eGroups Spotlight:
Lightning Strike Survivor List - on-line support group
for lightning strike survivors and their families.
http://www.egroups.com/group/lightningstrike/info.html
eGroups.com home: http://www.egroups.com/group/az_vjc
www.egroups.com - Simplifying group communications
--------------------------------------------------------------------------------
Click here, user!
eGroups.com home: http://www.egroups.com/group/az_vjc
www.egroups.com - Simplifying group communications
--------------------------------------------------------------------------------
eGroups.com home: http://www.egroups.com/group/az_vjc
www.egroups.com - Simplifying group communications
1302 From: DougB <daballard@p...>
Date: Sat Jun 19, 1999 8:11pm
Subject: Re: Bolt snapped
Depends on what you have. If it's a TJ (or any other coiled vehicle), you must keep the track bar, since coil springs have no real lateral strength. If you have a YJ, some disconnect or remove the rear, some also the front. I understand you can get a telescoping track bar that allows you to easily disconnect. On the road, it's probably best to keep it connected. I believe the CJ5's didn't have track bars (not sure about the 7's)
Doug
-----Original Message-----
From: Matt Barker <azjeeps@hotmail.com>
To: az_vjc@egroups.com <az_vjc@egroups.com>
Date: Saturday, June 19, 1999 8:00 PM
Subject: [az_vjc] Bolt snapped
Just took am quick run to a lake not that far away and while I was getting
up there the bolt that holds my front traction bar in place snapped! Just a
quick question to anyone out there. Do I really need to bolt that thing
back up or can I take it off completely? I've heard of others doing this,
just wanted to see if anyone here has done it or what there opions are.
Thanks,
Matt B.
__________________________________________________ _____________
Get Free Email and Do More On The Web. Visit http://www.msn.com
--------------------------------------------------------------------------------
Click Here!
eGroups.com home: http://www.egroups.com/group/az_vjc
www.egroups.com - Simplifying group communications
--------------------------------------------------------------------------------
eGroups.com home: http://www.egroups.com/group/az_vjc
www.egroups.com - Simplifying group communications
1303 From: DougB <daballard@p...>
Date: Sat Jun 19, 1999 8:14pm
Subject: Re: Drive Line shop
Thanks.
-----Original Message-----
From: David O'Boyle <doboyle@samaritan.edu>
To: az_vjc@egroups.com <az_vjc@egroups.com>; Jeep AzVJC <az_vjc@makelist.com>
Date: Saturday, June 19, 1999 7:57 PM
Subject: [az_vjc] Re: Drive Line shop
Dicks Drive shaft is on Mcdowell just west of 32nd st..
Dave (azxj) 93xj sport
-----Original Message-----
From: DougB <daballard@prodigy.net>
To: Jeep AzVJC <az_vjc@makelist.com>
Date: Saturday, June 19, 1999 4:22 PM
Subject: [az_vjc] Drive Line shop
Anyone know of a good drive line shop in the east valley? I dented my front one and need to get it rebalanced. TIA
Doug
--------------------------------------------------------------------------------
Click Here!
eGroups.com home: http://www.egroups.com/group/az_vjc
www.egroups.com - Simplifying group communications
--------------------------------------------------------------------------------
Click Here!
eGroups.com home: http://www.egroups.com/group/az_vjc
www.egroups.com - Simplifying group communications
--------------------------------------------------------------------------------
1283 From: Scott Kruize <OSMTJ@p...>
Date: Fri Jun 18, 1999 11:51pm
Subject: Re: Proposed 6/25 Lockett Meadow/Cinders
I agree with Doug. Next week is too short of notice. I'm for going on 7/9.
Scott Kruize
OSMTJ@p...
-----Original Message-----
From: DougB <daballard@p...>
To: Revolvr@a... <Revolvr@a...>; az_vjc@egroups.com
<az_vjc@egroups.com>
Date: Friday, June 18, 1999 10:36 PM
Subject: [az_vjc] Re: Proposed 6/25 Lockett Meadow/Cinders
I'd love to do this one, but probably can't on the can't on the 25th. July 9
is great w/ me.
Doug
-----Original Message-----
From: Revolvr@a... <Revolvr@a...>
To: az_vjc@egroups.com <az_vjc@egroups.com>
Date: Friday, June 18, 1999 9:08 PM
Subject: [az_vjc] Proposed 6/25 Lockett Meadow/Cinders
Is anyone planning to go on this trip? The proposed date is Fri 6/25. An
alternate date would be 7/9.
-- Dan
-------------------
I highly recommend camping at Lockett Meadow if we go wheeling at the
Cinders. This is a great place at the foot of the Inner Basin, very close to
the Cinders, in a scenic Aspen forest, at about 8500 feet.
The camping is considered primitive, with no facilities, although there is
one outhouse near the hiking trailhead. The Trailhead leads into the Inner
Basin and offers some great hiking. You can even connect to the Weatherford
Trail which will get you to the summit of Mt. Humphrey's.
I would recommend a trip the week before or the week after 4th of July to
avoid the crowds (6/25 or 7/9). Some of us could go on Friday afternoon to
pick a camp site. The camp sites are large enough for a good crowd. The best
camp sites are near the trailhead (and the outhouse). The weather will be
cool and nice.
I might be inclined to hike to the summit one day and go wheeling another
day. I tried to reach the summit last year about this time, but late snows
left the trails impassible above 10,000 feet without the right equipment.
'Course it was fun being waist deep in snow in June.
Any takers?
----------------------------------------------------------------------------
----
Click Here!
eGroups.com home: http://www.egroups.com/group/az_vjc
www.egroups.com - Simplifying group communications
------------------------------------------------------------------------
SIGN UP NOW FOR FREE HOME IMPROVEMENT HOW-TO'S
Receive seasonal how-to's and climate-specific advice via e-mail.
http://clickhere.egroups.com/click/131
eGroups.com home: http://www.egroups.com/group/az_vjc
http://www.egroups.com - Simplifying group communications
------------------------------------------------------------------------
eGroups.com home: http://www.egroups.com/group/az_vjc
http://www.egroups.com - Simplifying group communications
--------------------------------------------------------------------------------
ADVERTISEMENT
1284 From: Troy & Shannon Franks <tsfranks@i...>
Date: Fri Jun 18, 1999 11:44pm
Subject: found that rear end problem
I was going over the Wife's Jeep (Tonka) last night before we head out to the White tanks... I knew the rear ujoint was making noise, so I took a peek to see how much play it had in it....WOW... can you say lots....
went to the local parts store and picked up a the only thing they had...ELCHEAPO no name brand.. pulled her drive shaft, and 2 of the caps fell off on the very rear of the rear drive shaft... just the caps.. no bearings in them at all so last weekend Tonka ran the 4.0 trail with a VeRY bad ujoint. Spicer makes a real tuff ujoint to hold up to that kind of abuse. when we get a set of Six states drive shafts for her jeep I will demand nothing but Spicer (I think that is what they use anyway)
Now I just need Len to have Checkers carry them..
Troy
69 Waggy (Papa Tonka)
Shannon
88 Cherokee (Tonka)
--------------------------------------------------------------------------------
eGroups.com home: http://www.egroups.com/group/az_vjc
www.egroups.com - Simplifying group communications
1285 From: brian harmon <boh105@u...>
Date: Fri Jun 18, 1999 6:11pm
Subject: Re: [ Proposed 6/25 Lockett Meadow/Cinders]
7/9 would be good for some of us northern folk
have a chance to meet you all for the desert.
On the 25th we have to be out of town.
"DougB" <daballard@p...> wrote:
> ---------------------------------------------
> Attachment:
> MIME Type: multipart/alternative
> ---------------------------------------------
I'd love to do this one, but probably can't on the can't on the 25th. July 9
is great w/ me.
Doug
-----Original Message-----
From: Revolvr@a... <Revolvr@a...>
To: az_vjc@egroups.com <az_vjc@egroups.com>
Date: Friday, June 18, 1999 9:08 PM
Subject: [az_vjc] Proposed 6/25 Lockett Meadow/Cinders
Is anyone planning to go on this trip? The proposed date is Fri 6/25. An
alternate date would be 7/9.
-- Dan
-------------------
I highly recommend camping at Lockett Meadow if we go wheeling at the
Cinders. This is a great place at the foot of the Inner Basin, very close to
the Cinders, in a scenic Aspen forest, at about 8500 feet.
The camping is considered primitive, with no facilities, although there is
one outhouse near the hiking trailhead. The Trailhead leads into the Inner
Basin and offers some great hiking. You can even connect to the Weatherford
Trail which will get you to the summit of Mt. Humphrey's.
I would recommend a trip the week before or the week after 4th of July to
avoid the crowds (6/25 or 7/9). Some of us could go on Friday afternoon to
pick a camp site. The camp sites are large enough for a good crowd. The best
camp sites are near the trailhead (and the outhouse). The weather will be
cool and nice.
I might be inclined to hike to the summit one day and go wheeling another
day. I tried to reach the summit last year about this time, but late snows
left the trails impassible above 10,000 feet without the right equipment.
'Course it was fun being waist deep in snow in June.
Any takers?
--------------------------------------------------------------------------------
Click Here!
eGroups.com home: http://www.egroups.com/group/az_vjc
www.egroups.com - Simplifying group communications
------------------------------------------------------------------------
SIGN UP NOW FOR FREE HOME IMPROVEMENT HOW-TO'S
Receive seasonal how-to's and climate-specific advice via e-mail.
http://clickhere.egroups.com/click/131
eGroups.com home: http://www.egroups.com/group/az_vjc
http://www.egroups.com - Simplifying group communications
__________________________________________________ __________________
Get free e-mail and a permanent address at http://www.netaddress.com/?N=1
------------------------------------------------------------------------
eGroups.com home: http://www.egroups.com/group/az_vjc
http://www.egroups.com - Simplifying group communications
1286 From: James Junkin <jjunkin@p...>
Date: Sat Jun 19, 1999 10:38am
Subject: Re: found that rear end problem
I think NAPA carries spicer U-Joints
JJ
'81 Cherokee "Midnight" (4" Skyjacker, 33x12.5 AT's)
'98 TJ (Teraflexed, ARB's, 33x12.5 MT's etc., etc.)
'97 Teal J (Daughter's)
-----Original Message-----
From: Troy & Shannon Franks <tsfranks@inficad.com>
To: AZ Jeep <az_vjc@makelist.com>
Date: Saturday, June 19, 1999 12:40 AM
Subject: [az_vjc] found that rear end problem
I was going over the Wife's Jeep (Tonka) last night before we head out to the White tanks... I knew the rear ujoint was making noise, so I took a peek to see how much play it had in it....WOW... can you say lots....
went to the local parts store and picked up a the only thing they had...ELCHEAPO no name brand.. pulled her drive shaft, and 2 of the caps fell off on the very rear of the rear drive shaft... just the caps.. no bearings in them at all so last weekend Tonka ran the 4.0 trail with a VeRY bad ujoint. Spicer makes a real tuff ujoint to hold up to that kind of abuse. when we get a set of Six states drive shafts for her jeep I will demand nothing but Spicer (I think that is what they use anyway)
Now I just need Len to have Checkers carry them..
Troy
69 Waggy (Papa Tonka)
Shannon
88 Cherokee (Tonka)
--------------------------------------------------------------------------------
Click Here!
eGroups.com home: http://www.egroups.com/group/az_vjc
www.egroups.com - Simplifying group communications
--------------------------------------------------------------------------------
eGroups.com home: http://www.egroups.com/group/az_vjc
www.egroups.com - Simplifying group communications
1287 From: Ross Skinner <rskinner@s...>
Date: Sat Jun 19, 1999 3:54pm
Subject: Re: Proposed 6/25 Lockett Meadow/Cinders
7/9 is a possible for us. Sounds fun and we do a lot of hiking.
Ross & Deb Skinner
84 CJ7
Revolvr@a... wrote:
> Is anyone planning to go on this trip? The proposed date is Fri 6/25. An
> alternate date would be 7/9.
>
> -- Dan
>
> -------------------
> I highly recommend camping at Lockett Meadow if we go wheeling at the
> Cinders. This is a great place at the foot of the Inner Basin, very close to
> the Cinders, in a scenic Aspen forest, at about 8500 feet.
>
> The camping is considered primitive, with no facilities, although there is
> one outhouse near the hiking trailhead. The Trailhead leads into the Inner
> Basin and offers some great hiking. You can even connect to the Weatherford
> Trail which will get you to the summit of Mt. Humphrey's.
>
> I would recommend a trip the week before or the week after 4th of July to
> avoid the crowds (6/25 or 7/9). Some of us could go on Friday afternoon to
> pick a camp site. The camp sites are large enough for a good crowd. The best
> camp sites are near the trailhead (and the outhouse). The weather will be
> cool and nice.
>
> I might be inclined to hike to the summit one day and go wheeling another
> day. I tried to reach the summit last year about this time, but late snows
> left the trails impassible above 10,000 feet without the right equipment.
> 'Course it was fun being waist deep in snow in June.
>
> Any takers?
>
> ------------------------------------------------------------------------
> FREE email Newsletters delivered right to your in-box.
> CNET, USAToday, RollingStone, and more…
> Click Here Now! http://clickhere.egroups.com/click/314
>
> eGroups.com home: http://www.egroups.com/group/az_vjc
> http://www.egroups.com - Simplifying group communications
------------------------------------------------------------------------
eGroups.com home: http://www.egroups.com/group/az_vjc
http://www.egroups.com - Simplifying group communications
1288 From: DougB <daballard@p...>
Date: Sat Jun 19, 1999 4:15pm
Subject: TeraFlex 3" springs for TJ
I just upgraded my 3" springs for Tera's 4.5". They offer a trade in of $120 for the 3" springs, so I was about to ship them back for the credit, when I thought I'd offer these to anyone in the group, for the same price that TeraFlex was going to give me for them...$120. Let me know if anyone's interested, since I'll probably be shipping them out next week sometime.
Doug
--------------------------------------------------------------------------------
eGroups.com home: http://www.egroups.com/group/az_vjc
www.egroups.com - Simplifying group communications
1289 From: DougB <daballard@p...>
Date: Sat Jun 19, 1999 4:23pm
Subject: Drive Line shop
Anyone know of a good drive line shop in the east valley? I dented my front one and need to get it rebalanced. TIA
Doug
--------------------------------------------------------------------------------
eGroups.com home: http://www.egroups.com/group/az_vjc
www.egroups.com - Simplifying group communications
1290 From: <jeffm@d...>
Date: Sat Jun 19, 1999 5:40pm
Subject: Re: Drive Line shop
I know it's not east valley, but Driveline Service of Arizona (on Washington
between 36th st and the highway 143) builds new and rebuilds existing
driveshafts. I had a custom driveshaft built for my XJ from them ... quick
and very good quality.
Jeff
<002801bebaaa$c064f100$6cf4fdd-@pavilion> wrote:
Original Article: http://www.egroups.com/group/az_vjc/?start=1289
> Anyone know of a good drive line shop in the east valley? I dented my front one and need to get it rebalanced. TIA
>
> Doug
>
>
------------------------------------------------------------------------
eGroups.com home: http://www.egroups.com/group/az_vjc
http://www.egroups.com - Simplifying group communications
1291 From: <yjeric@m...>
Date: Sat Jun 19, 1999 7:08pm
Subject: White Tanks trip/ Catapiller Proving Grounds
Thanks to all who where on the White Tanks trail today I had a good time. Does anyone know anything about the Catapiller Proving Grounds? I heard a rumor that there is access to it?
------------------------------------------------------------------------
eGroups.com home: http://www.egroups.com/group/az_vjc
http://www.egroups.com - Simplifying group communications
1292 From: Joseph Clarke <azzonie@m...>
Date: Sat Jun 19, 1999 7:17pm
Subject: Re: White Tanks trip/ Catapiller Proving Grounds
Yes , White Tanks was fun. If the trail is expanded I'ld like to do it
again. Thanks to everyone.
----- Original Message -----
From: <yjeric@m...>
To: <az_vjc@eGroups.com>
Sent: Saturday, June 19, 1999 7:08 PM
Subject: [az_vjc] White Tanks trip/ Catapiller Proving Grounds
> Thanks to all who where on the White Tanks trail today I had a good time.
Does anyone know anything about the Catapiller Proving Grounds? I heard a
rumor that there is access to it?
>
>
> ------------------------------------------------------------------------
> SIGN UP NOW FOR FREE HOME IMPROVEMENT HOW-TO'S
> Receive seasonal how-to's and climate-specific advice via e-mail.
> http://clickhere.egroups.com/click/131
>
>
> eGroups.com home: http://www.egroups.com/group/az_vjc
> http://www.egroups.com - Simplifying group communications
>
>
>
>
------------------------------------------------------------------------
eGroups.com home: http://www.egroups.com/group/az_vjc
http://www.egroups.com - Simplifying group communications
1293 From: DougB <daballard@p...>
Date: Sat Jun 19, 1999 7:24pm
Subject: Re: Drive Line shop
Thanks. 4 Wheeler Supply also recommends them. I'll probably give them a call Monday.
Doug
-----Original Message-----
From: jeffm@desertwave.com <jeffm@desertwave.com>
To: az_vjc@eGroups.com <az_vjc@eGroups.com>
Date: Saturday, June 19, 1999 5:40 PM
Subject: [az_vjc] Re: Drive Line shop
I know it's not east valley, but Driveline Service of Arizona (on Washington
between 36th st and the highway 143) builds new and rebuilds existing
driveshafts. I had a custom driveshaft built for my XJ from them ... quick
and very good quality.
Jeff
<002801bebaaa$c064f100$6cf4fdd-@pavilion> wrote:
Original Article: http://www.egroups.com/group/az_vjc/?start=1289
> Anyone know of a good drive line shop in the east valley? I dented my front one and need to get it rebalanced. TIA
>
> Doug
>
>
--------------------------------------------------------------------------------
Click Here!
eGroups.com home: http://www.egroups.com/group/az_vjc
www.egroups.com - Simplifying group communications
--------------------------------------------------------------------------------
eGroups.com home: http://www.egroups.com/group/az_vjc
www.egroups.com - Simplifying group communications
1294 From: Len Sullivan <kermit@f...>
Date: Sat Jun 19, 1999 7:05pm
Subject: Re: White Tanks trip/ Catapiller Proving Grounds
To all that made the run today, I have for you the same reaction that I
received when I showed my friends the pictures of my truck going through the
lower section of that wash..............YOU GUYS ARE EXTREME!!!!!!! I loved
it, even though I went "Jeep-less" today.
Hope to see you all again soon.........
-Len Sullivan 1978 J-10
-FSJ List Administrator
-Phoenix, AZ ICQ# 38601959
-----Original Message-----
From: Joseph Clarke <azzonie@m...>
To: az_vjc@egroups.com <az_vjc@egroups.com>
Date: Saturday, June 19, 1999 7:20 PM
Subject: [az_vjc] Re: White Tanks trip/ Catapiller Proving Grounds
>Yes , White Tanks was fun. If the trail is expanded I'ld like to do it
>again. Thanks to everyone.
>----- Original Message -----
>From: <yjeric@m...>
>To: <az_vjc@eGroups.com>
>Sent: Saturday, June 19, 1999 7:08 PM
>Subject: [az_vjc] White Tanks trip/ Catapiller Proving Grounds
>
>
>> Thanks to all who where on the White Tanks trail today I had a good time.
>Does anyone know anything about the Catapiller Proving Grounds? I heard a
>rumor that there is access to it?
>>
------------------------------------------------------------------------
eGroups.com home: http://www.egroups.com/group/az_vjc
http://www.egroups.com - Simplifying group communications
1295 From: David O'Boyle <doboyle@s...>
Date: Sat Jun 19, 1999 7:48pm
Subject: Re: TeraFlex 3" springs for TJ
Is that for all four corners???
Dave (azxj) 93xj sport
-----Original Message-----
From: DougB <daballard@prodigy.net>
To: Jeep AzVJC <az_vjc@makelist.com>
Date: Saturday, June 19, 1999 4:14 PM
Subject: [az_vjc] TeraFlex 3" springs for TJ
I just upgraded my 3" springs for Tera's 4.5". They offer a trade in of $120 for the 3" springs, so I was about to ship them back for the credit, when I thought I'd offer these to anyone in the group, for the same price that TeraFlex was going to give me for them...$120. Let me know if anyone's interested, since I'll probably be shipping them out next week sometime.
Doug
--------------------------------------------------------------------------------
Click here, user!
eGroups.com home: http://www.egroups.com/group/az_vjc
www.egroups.com - Simplifying group communications
--------------------------------------------------------------------------------
eGroups.com home: http://www.egroups.com/group/az_vjc
www.egroups.com - Simplifying group communications
1296 From: David O'Boyle <doboyle@s...>
Date: Sat Jun 19, 1999 7:49pm
Subject: Re: Drive Line shop
Dicks Drive shaft is on Mcdowell just west of 32nd st..
Dave (azxj) 93xj sport
-----Original Message-----
From: DougB <daballard@prodigy.net>
To: Jeep AzVJC <az_vjc@makelist.com>
Date: Saturday, June 19, 1999 4:22 PM
Subject: [az_vjc] Drive Line shop
Anyone know of a good drive line shop in the east valley? I dented my front one and need to get it rebalanced. TIA
Doug
--------------------------------------------------------------------------------
Click Here!
eGroups.com home: http://www.egroups.com/group/az_vjc
www.egroups.com - Simplifying group communications
--------------------------------------------------------------------------------
eGroups.com home: http://www.egroups.com/group/az_vjc
www.egroups.com - Simplifying group communications
1298 From: Matt Barker <azjeeps@h...>
Date: Sat Jun 19, 1999 0:59pm
Subject: Bolt snapped
Just took am quick run to a lake not that far away and while I was getting
up there the bolt that holds my front traction bar in place snapped! Just a
quick question to anyone out there. Do I really need to bolt that thing
back up or can I take it off completely? I've heard of others doing this,
just wanted to see if anyone here has done it or what there opions are.
Thanks,
Matt B.
__________________________________________________ _____________
Get Free Email and Do More On The Web. Visit http://www.msn.com
------------------------------------------------------------------------
eGroups.com home: http://www.egroups.com/group/az_vjc
http://www.egroups.com - Simplifying group communications
1299 From: David O'Boyle <doboyle@s...>
Date: Sat Jun 19, 1999 7:54pm
Subject: Re: White Tanks trip/ Catapiller Proving Grounds
Only if you know someone that works there.
Dave (azxj) 93xj sport
-----Original Message-----
From: yjeric@m... <yjeric@m...>
To: az_vjc@egroups.com <az_vjc@egroups.com>
Date: Saturday, June 19, 1999 7:08 PM
Subject: [az_vjc] White Tanks trip/ Catapiller Proving Grounds
>Thanks to all who where on the White Tanks trail today I had a good time.
Does anyone know anything about the Catapiller Proving Grounds? I heard a
rumor that there is access to it?
>
>
>------------------------------------------------------------------------
>SIGN UP NOW FOR FREE HOME IMPROVEMENT HOW-TO'S
>Receive seasonal how-to's and climate-specific advice via e-mail.
>http://clickhere.egroups.com/click/131
>
>
>eGroups.com home: http://www.egroups.com/group/az_vjc
>http://www.egroups.com - Simplifying group communications
>
>
>
>
------------------------------------------------------------------------
eGroups.com home: http://www.egroups.com/group/az_vjc
http://www.egroups.com - Simplifying group communications
1300 From: DougB <daballard@p...>
Date: Sat Jun 19, 1999 8:05pm
Subject: Re: TeraFlex 3" springs for TJ
Yup.
-----Original Message-----
From: David O'Boyle <doboyle@samaritan.edu>
To: az_vjc@egroups.com <az_vjc@egroups.com>
Date: Saturday, June 19, 1999 7:55 PM
Subject: [az_vjc] Re: TeraFlex 3" springs for TJ
Is that for all four corners???
Dave (azxj) 93xj sport
-----Original Message-----
From: DougB <daballard@prodigy.net>
To: Jeep AzVJC <az_vjc@makelist.com>
Date: Saturday, June 19, 1999 4:14 PM
Subject: [az_vjc] TeraFlex 3" springs for TJ
I just upgraded my 3" springs for Tera's 4.5". They offer a trade in of $120 for the 3" springs, so I was about to ship them back for the credit, when I thought I'd offer these to anyone in the group, for the same price that TeraFlex was going to give me for them...$120. Let me know if anyone's interested, since I'll probably be shipping them out next week sometime.
Doug
--------------------------------------------------------------------------------
Click here, user!
eGroups.com home: http://www.egroups.com/group/az_vjc
www.egroups.com - Simplifying group communications
--------------------------------------------------------------------------------
eGroups Spotlight:
Lightning Strike Survivor List - on-line support group
for lightning strike survivors and their families.
http://www.egroups.com/group/lightningstrike/info.html
eGroups.com home: http://www.egroups.com/group/az_vjc
www.egroups.com - Simplifying group communications
--------------------------------------------------------------------------------
eGroups.com home: http://www.egroups.com/group/az_vjc
www.egroups.com - Simplifying group communications
1301 From: David O'Boyle <doboyle@s...>
Date: Sat Jun 19, 1999 8:00pm
Subject: Re: TeraFlex 3" springs for TJ
I might know someone interested
let me call him and e-mail you back..
Dave (azxj) 93xj sport
-----Original Message-----
From: DougB <daballard@prodigy.net>
To: az_vjc@egroups.com <az_vjc@egroups.com>
Date: Saturday, June 19, 1999 8:03 PM
Subject: [az_vjc] Re: TeraFlex 3" springs for TJ
Yup.
-----Original Message-----
From: David O'Boyle <doboyle@samaritan.edu>
To: az_vjc@egroups.com <az_vjc@egroups.com>
Date: Saturday, June 19, 1999 7:55 PM
Subject: [az_vjc] Re: TeraFlex 3" springs for TJ
Is that for all four corners???
Dave (azxj) 93xj sport
-----Original Message-----
From: DougB <daballard@prodigy.net>
To: Jeep AzVJC <az_vjc@makelist.com>
Date: Saturday, June 19, 1999 4:14 PM
Subject: [az_vjc] TeraFlex 3" springs for TJ
I just upgraded my 3" springs for Tera's 4.5". They offer a trade in of $120 for the 3" springs, so I was about to ship them back for the credit, when I thought I'd offer these to anyone in the group, for the same price that TeraFlex was going to give me for them...$120. Let me know if anyone's interested, since I'll probably be shipping them out next week sometime.
Doug
--------------------------------------------------------------------------------
Click here, user!
eGroups.com home: http://www.egroups.com/group/az_vjc
www.egroups.com - Simplifying group communications
--------------------------------------------------------------------------------
eGroups Spotlight:
Lightning Strike Survivor List - on-line support group
for lightning strike survivors and their families.
http://www.egroups.com/group/lightningstrike/info.html
eGroups.com home: http://www.egroups.com/group/az_vjc
www.egroups.com - Simplifying group communications
--------------------------------------------------------------------------------
Click here, user!
eGroups.com home: http://www.egroups.com/group/az_vjc
www.egroups.com - Simplifying group communications
--------------------------------------------------------------------------------
eGroups.com home: http://www.egroups.com/group/az_vjc
www.egroups.com - Simplifying group communications
1302 From: DougB <daballard@p...>
Date: Sat Jun 19, 1999 8:11pm
Subject: Re: Bolt snapped
Depends on what you have. If it's a TJ (or any other coiled vehicle), you must keep the track bar, since coil springs have no real lateral strength. If you have a YJ, some disconnect or remove the rear, some also the front. I understand you can get a telescoping track bar that allows you to easily disconnect. On the road, it's probably best to keep it connected. I believe the CJ5's didn't have track bars (not sure about the 7's)
Doug
-----Original Message-----
From: Matt Barker <azjeeps@hotmail.com>
To: az_vjc@egroups.com <az_vjc@egroups.com>
Date: Saturday, June 19, 1999 8:00 PM
Subject: [az_vjc] Bolt snapped
Just took am quick run to a lake not that far away and while I was getting
up there the bolt that holds my front traction bar in place snapped! Just a
quick question to anyone out there. Do I really need to bolt that thing
back up or can I take it off completely? I've heard of others doing this,
just wanted to see if anyone here has done it or what there opions are.
Thanks,
Matt B.
__________________________________________________ _____________
Get Free Email and Do More On The Web. Visit http://www.msn.com
--------------------------------------------------------------------------------
Click Here!
eGroups.com home: http://www.egroups.com/group/az_vjc
www.egroups.com - Simplifying group communications
--------------------------------------------------------------------------------
eGroups.com home: http://www.egroups.com/group/az_vjc
www.egroups.com - Simplifying group communications
1303 From: DougB <daballard@p...>
Date: Sat Jun 19, 1999 8:14pm
Subject: Re: Drive Line shop
Thanks.
-----Original Message-----
From: David O'Boyle <doboyle@samaritan.edu>
To: az_vjc@egroups.com <az_vjc@egroups.com>; Jeep AzVJC <az_vjc@makelist.com>
Date: Saturday, June 19, 1999 7:57 PM
Subject: [az_vjc] Re: Drive Line shop
Dicks Drive shaft is on Mcdowell just west of 32nd st..
Dave (azxj) 93xj sport
-----Original Message-----
From: DougB <daballard@prodigy.net>
To: Jeep AzVJC <az_vjc@makelist.com>
Date: Saturday, June 19, 1999 4:22 PM
Subject: [az_vjc] Drive Line shop
Anyone know of a good drive line shop in the east valley? I dented my front one and need to get it rebalanced. TIA
Doug
--------------------------------------------------------------------------------
Click Here!
eGroups.com home: http://www.egroups.com/group/az_vjc
www.egroups.com - Simplifying group communications
--------------------------------------------------------------------------------
Click Here!
eGroups.com home: http://www.egroups.com/group/az_vjc
www.egroups.com - Simplifying group communications
--------------------------------------------------------------------------------