Pics of Cage install...

[jeepin_in_az]

This is the TOR (Tennesee Off Road) cage kit. Finally had time to install it.

http://www.imagestation.com/picture/sraid97/p73cbcb1aa7f232a9ba40bd15b1b69122/fa0f4b17.jpg


http://www.imagestation.com/picture/sraid97/p699a9c9dd92b0a8a78f66856b0154638/fa0f4b03.jpg


http://www.imagestation.com/picture/sraid97/p61301a6cfec6962ae72309b254835b24/fa0f4b0f.jpg


http://www.imagestation.com/picture/sraid97/p8c8358a899ce8df39f94ffaa1c2e9868/fa0f4aff.jpg


http://www.imagestation.com/picture/sraid97/pd1d2cc3528b07cba775ffaa9884b4995/fa0f4b1f.jpg

[Joe-CJ7]

Looks nice Mike.

[Joe West]

NICE!

Goes all the way to the floor? Looks like it anyway. Have you added doublers on the bottom side of the floorpan to strengthen the connection to the floor? If you are considering tying it to the frame, John at Hunter can fabricate two adapters to bolt to the floor piece and then tie (via a weld) into the frame... it didn't cost much for this mod when I had it done.


Good JOB!

Joe

[jeepin_in_az]

Originally posted by Gump
nice color did you hire ***** eye for t=he straight guy to help you?

j/k

looks good. now maybe you will have time to get those long arms done finally. when do you want to pick up the skid plate?


:D

Is that ***** eye show your new fav? Maybe you can come watch it with my wife, since you both prob think they are cute....:*******: :D

Long arms are next....I was up in the ghetto on Sunday, but didn't think of calling you to get it. Maybe this weekend coming up.

[jeepin_in_az]

Originally posted by Joe West
NICE!

Goes all the way to the floor? Looks like it anyway. Have you added doublers on the bottom side of the floorpan to strengthen the connection to the floor? If you are considering tying it to the frame, John at Hunter can fabricate two adapters to bolt to the floor piece and then tie (via a weld) into the frame... it didn't cost much for this mod when I had it done.


Good JOB!

Joe
Thanks Joe. It does go all the way to the floor and the base plate is welded to the floor. I have a frame tie in kit, just debating if I want to add it in. I still need to add a spreader bar across the dash, then one in the back too,but needed to have it drivable by today.

[teh]

http://www.imagestation.com/picture/sraid97/p8c8358a899ce8df39f94ffaa1c2e9868/fa0f4aff.jpg

Which side of your house is this on, the side with 100ft to the next neighbor, or the one with 150ft to the next neighbor?

[jeepin_in_az]

Originally posted by teh

Which side of your house is this on, the side with 100ft to the next neighbor, or the one with 150ft to the next neighbor?


Use the search on JU, it is the side with 35 ft. If you look at the other pics, you will see that there is that much yard plus some more not in the pic you posted, plus a 2 car driveway seperating our houses.....

[bubba]

pretty

[3timejeepin]

looks really good, would this be the install i failed to show and help with?? Sorry about that as i said new years got the best of the day after!! Damn Corona's.

[jeepin_in_az]

Originally posted by 3timejeepin
looks really good, would this be the install i failed to show and help with?? Sorry about that as i said new years got the best of the day after!! Damn Corona's.


The same. No prob, had a few friends come over.

[sundevil98]

Looks nice!

Can you give some details about the installation?

I bought a TNOR cage a few years ago, and still don't have it installed - mainly because I didn't know anyone who could install it for me.

Now, I'm up in Michigan, and finally have someone who'll help me out with it.

I'd like to give him some more info about the process involved in getting it in place.

How much time did it take you to get your cage installed? How did you go about the installation?

I figure the process basically involves cutting the holes in the dash for the bars to go through, then doing a dry fit, tack welding things into place, then removing the cage and welding things up tight, then re-installing the cage and doing the final weld to the factory roll bar? Is that it? Or am I way off?

Also, how did you go about figuring out the location of the holes in the dash? And, what did you use to cut the holes out?

How difficult was it to re-route the A/C ducting?

Any other advice you have would be most helpful. As I said, I've got the same kit and I'll probably be installing it (hopefully) sometime this spring/summer - when it finally warms up a bit!

Also, what did you do, if anything, to tie the windshield to the new cage? I was thinking that the old tie ins could somehow be used from the factory bars. But, I'm not quite sure.

And, does TNOR now sell a frame tie-in kit? Or did you buy that somewhere else?

do you think you could post some pictures of where the bars come down to the floor? I'm curious as to how much room it leaves around the clutch area on the driver's side.

[mr_super-hunky]

Nice lincoln power-mig in the background!, I've got the same one. Got tired of all the splatter!