David C
07-15-2007, 02:14 AM
I have 2 Bilstein Shocks that have never been used. From what I can tell, I believe they are series 6100, but not for a Jeep. They measure about 16.5 to 17 inches extended and 12.5 to 13 inches collapsed. Numbers stamped into them are: 2511418W00 on one side and 220 976 30 on the other side. I don't know much more about them except they are gas charged and very strong! I could barely collapse them by myself.
I got 4 total, but the other 2 were much longer and fit on the rear of my Jeep. I can't use these shorter ones and I would trade them for something I can use. Things I could use:
2 shocks that will fit the front of my Jeep
Trackbar relocation brackets and/or adjustable trackbars
1" motor mount lifts
Rear swaybar extended links (or disconnects)
Heavy duty lower control arm brackets for welding onto my front axle
Tonneau cover - black
Soft top tinted windows
Dana 44 or Ford 8.8 rear axle...:rolleyes: ok, scratch that - wishful thinking
Any reasonable trade would be considered
I got 4 total, but the other 2 were much longer and fit on the rear of my Jeep. I can't use these shorter ones and I would trade them for something I can use. Things I could use:
2 shocks that will fit the front of my Jeep
Trackbar relocation brackets and/or adjustable trackbars
1" motor mount lifts
Rear swaybar extended links (or disconnects)
Heavy duty lower control arm brackets for welding onto my front axle
Tonneau cover - black
Soft top tinted windows
Dana 44 or Ford 8.8 rear axle...:rolleyes: ok, scratch that - wishful thinking
Any reasonable trade would be considered