Dome light will not turn off. Advice?

[heykoolaid3]

As I was driving today, I noticed that my dome light would not turn off. I turned the light switch over and it didn't turn off. I disabled the door disable fuse, lights still on. I then pulled the IOD Fuse under the hood, light out, but no instruments work.

So, could it be the light switch?

Thanks in advance..

Johnny

[lancetkenyon]

Pull the bulb...........

[heykoolaid3]

Has anyone had this issue? Just wanted to confirm that it's most likely the lightswitch. Thanks!

[Washington_XJ]

I had this problem last night. Then I remembered I had too much to drink and forgot to turn the switch off.

Yes sad story. :D

[Renob]

Pull the bulb...........Troll!

[ademster]

sounds like your switch has shorted.... AND OR the wiring to the switch has melted from to much current running through it... thus being a short in the switch or at the bulbs somewhere.

[Wind_Danzer]

Try removing the fuse if the light is on all the time. Depends on year of Jeep.

[GLEN REAMS]

i had the problem i just took out the whole light itself

[Mike McGreevy]

ever think u might have a gost in ur jeep???? A posested jeep...lol:D

[lancetkenyon]

Troll!

HEY! I resemble that......:mad:

[heykoolaid3]

It was the alarm system. We took the connection of the dome light away from the alarm module. Dome light works great. All is well. NO GHOSTS! haha!
:D

[ThumpAZ]

I've never liked useing the dome light as the door opened sensor input on alarms.
I'd rather tie a series wire into all of the switches or install secondary switches into the system. The feedback that can come through can cause exactly what you described ehre.