D60 Boring for 35 splines, Who's interested ??

[AZXJ]

Let us know, we are considering taking this on as a new service for our customers.

responce here is fine and please keep it on topic..

Thanks
Dave
480-288-4213

[k7mto]

It'll be a bit before I'm ready, but I plan to have mine bored out (if possible) for 35 spline shafts. If the spindles are to thin to be bored, I plan to have them cut off and have Ford spindles welded on in their place so maybe this is something you guys can handle as well. I know it takes a jig to ensure the new spindles are straight and true with the axle.

[AZXJ]

We are looking into tooling.. :D just wanna do the market research first..

[twstdtj]

If its #s your looking for, I already had mine done.

[AZXJ]

Not really looking for numbers.. just curious to see how many folks would be interested in this service..

Dave
480-288-4213

[lee alexander]

Dave, my spindles are at 1.6". Do I still need them bored out for 35 spline axel shafts?

[xjcrawlr]

I'm going to need to get it done, just not sure if the 60 mile drive is worth it :eek:

[AZXJ]

It's totally worth it to see ME :D

[Jobless]

Just did my buddies rear Dana 60 FF housing up at S&N fab a few months ago.

Anyway, the tool works sweet put you sure need to put your back into it :eek:

[AZXJ]

Dave, my spindles are at 1.6". Do I still need them bored out for 35 spline axel shafts?

Lee,

You should be good to go with the big bore spindles.. You got lucky!! :D

[lee alexander]

Lee,

You should be good to go with the big bore spindles.. You got lucky!! :D

That's good, I don't get lucky to often. Thank's for your time Dave. Lee