blooddrive
01-04-2004, 11:12 AM
43310-43334
43310 From: jeepin_in_az <jeepin_in_az@y...>
Date: Wed Feb 20, 2002 8:13am
Subject: Re: -----ROOM FOR RENT------
Somebody was just looking for a place to rent, seems like he is in
Chandler.....might want to check back to last week......it was an OT
post, should be easy to find.
Mike Baney
--- In az_vjc@y..., "kmichael02" <kmichael02@y...> wrote:
> In Tempe...3bd 2 bath, huge back yard, garage...
>
> figured I'd throw this out to some jeepers first..
>
> bout 3 miles from the asu.
>
> Rent 345
>
> any interest email me directly
>
> kmichael02@y...
>
> mike
--------------------------------------------------------------------------------
ADVERTISEMENT
43311 From: David R. W. Withers <dr_ww@h...>
Date: Wed Feb 20, 2002 8:19am
Subject: RE: anyone?lift kit input...
Oops I meant to say you won't want to replace
-----Original Message-----
From: David R. W. Withers [mailto:dr_ww@h...]
Sent: Wednesday, February 20, 2002 8:59 AM
To: 'Brian Peletz'; az_vjc@yahoogroups.com
Subject: RE: [az_vjc] anyone?lift kit input...
The best advice I got was when I asked the same question was: "save your
money and by one lift you want to replace." What type of vehicle is it
for?
-----Original Message-----
From: Brian Peletz [mailto:big86er@y...]
Sent: Tuesday, February 19, 2002 10:11 PM
To: az_vjc@yahoogroups.com
Subject: [az_vjc] anyone?lift kit input...
Hi,
Been looking at 4" lift kits and have narrowed it
down to these possibilities. Super lift, rough
country, and trail master. These are the $500 starter
kits. Does anyone have experience with these. I
would like to know about reliability quality and all
those other things everybody wants to get out of it.
I am also looking for the option to go taller if I
feel the urge and dont want a lot of parts to throw
away if I do. I also plan on going to a full kit when
I get the money and would like to know if anyone has
experience on which would be most economical.
Thanks
Brian
__________________________________________________
Do You Yahoo!?
Yahoo! Sports - Coverage of the 2002 Olympic Games
http://sports.yahoo.com
Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
43312 From: jaylalib <jaylalib@h...>
Date: Wed Feb 20, 2002 8:17am
Subject: Re: JB SYE Questions
Hi Les,
I just called today and they quoted me $200+ tax.
Jason
--- In az_vjc@y..., "paparoach85251" <lespaparoach@m...> wrote:
> Mike,
> I am getting ready to install a SYE of my own. How much did the new
> cv drivshaft cost you from Dick's Driveshaft? Do you recommend them
> or is there somewhere else in town which may be better?
>
> Thanks, Les
>
> --- In az_vjc@y..., "jeepin_in_az" <jeepin_in_az@y...> wrote:
> > Hey Jason, the length is going to depend on what tranny and rear
> axle
> > you have. I have the manual and 44 rear, my length was 15.5", as
> > where James T has the auto and the 35, and his was something like
> > 17.75". It is best to wait to measure it though.
> >
> > Mike Baney
> >
> >
> >
> > --- In az_vjc@y..., "Laliberty, Jason (SCP)"
<jason.laliberty@f...>
> > wrote:
> > > So I finally purchased the SYE kit. My questions is do I have
to
> > wait to install it to find out what the drive shaft length will
> be.
> > I didn't know if someone could tell me the length (Maybe they
have
> > the same setup as I do)
> > >
> > > I have 4.5 RE coilsprings. I still have factory control arms.
I
> > have dropped the transfercase.
> > >
> > > Thanks,
> > >
> > > Jason LaLiberty
> > > 99' TJ
> > > www.greenmachine.alloffroad.com
> > >
> > > P.S.
> > >
> > > Hey Les, thanks for the heads up on the sale!!
43313 From: David R. W. Withers <dr_ww@h...>
Date: Wed Feb 20, 2002 8:20am
Subject: RE: Re: JB SYE Questions
Mike that weekend you had it done, you told me $180. Same weekend you
picked up expo tickets
David
-----Original Message-----
From: jeepin_in_az [mailto:jeepin_in_az@y...]
Sent: Wednesday, February 20, 2002 9:12 AM
To: az_vjc@yahoogroups.com
Subject: [az_vjc] Re: JB SYE Questions
I highly recommend Dicks, be warned CASH ONLY. I think it was $180, or
was it $80??? James?? Wanna say $80, but damn, can't remember.....
Mike
--- In az_vjc@y..., "paparoach85251" <lespaparoach@m...> wrote:
> Mike,
> I am getting ready to install a SYE of my own. How much did the new cv
> drivshaft cost you from Dick's Driveshaft? Do you recommend them or is
> there somewhere else in town which may be better?
>
> Thanks, Les
>
> --- In az_vjc@y..., "jeepin_in_az" <jeepin_in_az@y...> wrote:
> > Hey Jason, the length is going to depend on what tranny and rear
> axle
> > you have. I have the manual and 44 rear, my length was 15.5", as
> > where James T has the auto and the 35, and his was something like
> > 17.75". It is best to wait to measure it though.
> >
> > Mike Baney
> >
> >
> >
> > --- In az_vjc@y..., "Laliberty, Jason (SCP)"
<jason.laliberty@f...>
> > wrote:
> > > So I finally purchased the SYE kit. My questions is do I have
to
> > wait to install it to find out what the drive shaft length will
> be.
> > I didn't know if someone could tell me the length (Maybe they
have
> > the same setup as I do)
> > >
> > > I have 4.5 RE coilsprings. I still have factory control arms.
I
> > have dropped the transfercase.
> > >
> > > Thanks,
> > >
> > > Jason LaLiberty
> > > 99' TJ
> > > www.greenmachine.alloffroad.com
> > >
> > > P.S.
> > >
> > > Hey Les, thanks for the heads up on the sale!!
Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
43314 From: Mike Baney <jeepin_in_az@y...>
Date: Wed Feb 20, 2002 8:19am
Subject: RE: Re: JB SYE Questions
Ok, it was $180....
Mike
--- "David R. W. Withers" <dr_ww@h...> wrote:
> Mike that weekend you had it done, you told me $180. Same weekend you
> picked up expo tickets
> David
>
> -----Original Message-----
> From: jeepin_in_az [mailto:jeepin_in_az@y...]
> Sent: Wednesday, February 20, 2002 9:12 AM
> To: az_vjc@yahoogroups.com
> Subject: [az_vjc] Re: JB SYE Questions
>
>
> I highly recommend Dicks, be warned CASH ONLY. I think it was $180, or
> was it $80??? James?? Wanna say $80, but damn, can't remember.....
>
> Mike
>
>
> --- In az_vjc@y..., "paparoach85251" <lespaparoach@m...> wrote:
> > Mike,
> > I am getting ready to install a SYE of my own. How much did the new cv
>
> > drivshaft cost you from Dick's Driveshaft? Do you recommend them or is
>
> > there somewhere else in town which may be better?
> >
> > Thanks, Les
> >
> > --- In az_vjc@y..., "jeepin_in_az" <jeepin_in_az@y...> wrote:
> > > Hey Jason, the length is going to depend on what tranny and rear
> > axle
> > > you have. I have the manual and 44 rear, my length was 15.5", as
> > > where James T has the auto and the 35, and his was something like
> > > 17.75". It is best to wait to measure it though.
> > >
> > > Mike Baney
> > >
> > >
> > >
> > > --- In az_vjc@y..., "Laliberty, Jason (SCP)"
> <jason.laliberty@f...>
> > > wrote:
> > > > So I finally purchased the SYE kit. My questions is do I have
> to
> > > wait to install it to find out what the drive shaft length will
> > be.
> > > I didn't know if someone could tell me the length (Maybe they
> have
> > > the same setup as I do)
> > > >
> > > > I have 4.5 RE coilsprings. I still have factory control arms.
> I
> > > have dropped the transfercase.
> > > >
> > > > Thanks,
> > > >
> > > > Jason LaLiberty
> > > > 99' TJ
> > > > www.greenmachine.alloffroad.com
> > > >
> > > > P.S.
> > > >
> > > > Hey Les, thanks for the heads up on the sale!!
>
>
>
>
> Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
>
>
__________________________________________________
Do You Yahoo!?
Yahoo! Sports - Coverage of the 2002 Olympic Games
http://sports.yahoo.com
43315 From: jeepin_in_az <jeepin_in_az@y...>
Date: Wed Feb 20, 2002 8:24am
Subject: Re: anyone?lift kit input...
To be honest Brian, David gave you the best answer. If you already
plan on going bigger, but don't have the cash for it, WAIT. If you
have $500 burning a hole in your pocket, start with things you will
need anyway that are not included in a kit. SYE, aftermarket tire
carier, winch, front bumpers. Why waste the money on a lift that you
are going to replace anyway? Also, you will prob go with bigger
tires too, so there is another added expense, a second set of tires.
I know it is hard to wait, but think of the money and labor you will
save yourself. If anything, buy a budget boost (coil spacers) just
to get you out of stock size.
Mike Baney
n az_vjc@y..., "David R. W. Withers" <dr_ww@h...> wrote:
>
> Oops I meant to say you won't want to replace
> -----Original Message-----
> From: David R. W. Withers [mailto:dr_ww@h...]
> Sent: Wednesday, February 20, 2002 8:59 AM
> To: 'Brian Peletz'; az_vjc@y...
> Subject: RE: [az_vjc] anyone?lift kit input...
>
>
> The best advice I got was when I asked the same question was: "save
your
> money and by one lift you want to replace." What type of vehicle is
it
> for?
>
> -----Original Message-----
> From: Brian Peletz [mailto:big86er@y...]
> Sent: Tuesday, February 19, 2002 10:11 PM
> To: az_vjc@y...
> Subject: [az_vjc] anyone?lift kit input...
>
>
> Hi,
> Been looking at 4" lift kits and have narrowed it
> down to these possibilities. Super lift, rough
> country, and trail master. These are the $500 starter
> kits. Does anyone have experience with these. I
> would like to know about reliability quality and all
> those other things everybody wants to get out of it.
> I am also looking for the option to go taller if I
> feel the urge and dont want a lot of parts to throw
> away if I do. I also plan on going to a full kit when
> I get the money and would like to know if anyone has
> experience on which would be most economical.
>
> Thanks
> Brian
>
> __________________________________________________
> Do You Yahoo!?
> Yahoo! Sports - Coverage of the 2002 Olympic Games
> http://sports.yahoo.com
>
>
>
> Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
>
>
>
>
>
> Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
43316 From: jeepin_in_az <jeepin_in_az@y...>
Date: Wed Feb 20, 2002 8:25am
Subject: Re: JB SYE Questions
You forgot to mention that AzVJC discount......
Mike Baney
--- In az_vjc@y..., "jaylalib" <jaylalib@h...> wrote:
> Hi Les,
>
> I just called today and they quoted me $200+ tax.
>
> Jason
>
>
>
>
> --- In az_vjc@y..., "paparoach85251" <lespaparoach@m...> wrote:
> > Mike,
> > I am getting ready to install a SYE of my own. How much did the
new
> > cv drivshaft cost you from Dick's Driveshaft? Do you recommend
them
> > or is there somewhere else in town which may be better?
> >
> > Thanks, Les
> >
> > --- In az_vjc@y..., "jeepin_in_az" <jeepin_in_az@y...> wrote:
> > > Hey Jason, the length is going to depend on what tranny and
rear
> > axle
> > > you have. I have the manual and 44 rear, my length was 15.5",
as
> > > where James T has the auto and the 35, and his was something
like
> > > 17.75". It is best to wait to measure it though.
> > >
> > > Mike Baney
> > >
> > >
> > >
> > > --- In az_vjc@y..., "Laliberty, Jason (SCP)"
> <jason.laliberty@f...>
> > > wrote:
> > > > So I finally purchased the SYE kit. My questions is do I
have
> to
> > > wait to install it to find out what the drive shaft length will
> > be.
> > > I didn't know if someone could tell me the length (Maybe they
> have
> > > the same setup as I do)
> > > >
> > > > I have 4.5 RE coilsprings. I still have factory control
arms.
> I
> > > have dropped the transfercase.
> > > >
> > > > Thanks,
> > > >
> > > > Jason LaLiberty
> > > > 99' TJ
> > > > www.greenmachine.alloffroad.com
> > > >
> > > > P.S.
> > > >
> > > > Hey Les, thanks for the heads up on the sale!!
43317 From: Scott Thomas <sthomas@a...>
Date: Wed Feb 20, 2002 8:33am
Subject: RE: Re: anyone?lift kit input...
I have to agree with Mike 100%. I am currently working on getting the stuff
for my 3rd lift. I would have just wanted and saved my money I would
already be there and it would be the way that I want it to look. I bought
my 2" lift and ran it for 2 1/2 months, before going bigger. Good luck.
Scott Thomas
97' Tj
-----Original Message-----
From: jeepin_in_az [mailto:jeepin_in_az@y...]
Sent: Wednesday, February 20, 2002 9:24 AM
To: az_vjc@yahoogroups.com
Subject: [az_vjc] Re: anyone?lift kit input...
To be honest Brian, David gave you the best answer. If you already
plan on going bigger, but don't have the cash for it, WAIT. If you
have $500 burning a hole in your pocket, start with things you will
need anyway that are not included in a kit. SYE, aftermarket tire
carier, winch, front bumpers. Why waste the money on a lift that you
are going to replace anyway? Also, you will prob go with bigger
tires too, so there is another added expense, a second set of tires.
I know it is hard to wait, but think of the money and labor you will
save yourself. If anything, buy a budget boost (coil spacers) just
to get you out of stock size.
Mike Baney
n az_vjc@y..., "David R. W. Withers" <dr_ww@h...> wrote:
>
> Oops I meant to say you won't want to replace
> -----Original Message-----
> From: David R. W. Withers [mailto:dr_ww@h...]
> Sent: Wednesday, February 20, 2002 8:59 AM
> To: 'Brian Peletz'; az_vjc@y...
> Subject: RE: [az_vjc] anyone?lift kit input...
>
>
> The best advice I got was when I asked the same question was: "save
your
> money and by one lift you want to replace." What type of vehicle is
it
> for?
>
> -----Original Message-----
> From: Brian Peletz [mailto:big86er@y...]
> Sent: Tuesday, February 19, 2002 10:11 PM
> To: az_vjc@y...
> Subject: [az_vjc] anyone?lift kit input...
>
>
> Hi,
> Been looking at 4" lift kits and have narrowed it
> down to these possibilities. Super lift, rough
> country, and trail master. These are the $500 starter
> kits. Does anyone have experience with these. I
> would like to know about reliability quality and all
> those other things everybody wants to get out of it.
> I am also looking for the option to go taller if I
> feel the urge and dont want a lot of parts to throw
> away if I do. I also plan on going to a full kit when
> I get the money and would like to know if anyone has
> experience on which would be most economical.
>
> Thanks
> Brian
>
> __________________________________________________
> Do You Yahoo!?
> Yahoo! Sports - Coverage of the 2002 Olympic Games
> http://sports.yahoo.com
>
>
>
> Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
>
>
>
>
>
> Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
43318 From: Roger Tomas <tomasr@a...>
Date: Wed Feb 20, 2002 8:30am
Subject: Re: JB SYE Questions
As others have said, it depends on what tranny, what rear axle, how much
lift including how much sag due to extra weight you may have added to
your Jeep and due to how much you've abused your springs. Note that
if your springs are new, they're probably taller now than they may be a
year from now.
Of course, you'll be removing the t-case drop so that will also increase
the length of the driveshaft you need.
I think it is best to do all your mods and then measure. This will put
your Jeep out of commission but only for a day.
-Roger
"Laliberty, Jason (SCP)" wrote:
>
> So I finally purchased the SYE kit. My questions is do I have to wait to install it to find out what the drive shaft length will be. I didn't know if someone could tell me the length (Maybe they have the same setup as I do)
>
> I have 4.5 RE coilsprings. I still have factory control arms. I have dropped the transfercase.
43319 From: Alan Doty <doty34@a...>
Date: Wed Feb 20, 2002 8:35am
Subject: broken wheel stud removal
Does anyone have any good ideas on the removal of a broken wheel stud on the rear axle?
Alan
43320 From: Randall A.Mutter <ramaz@c...>
Date: Wed Feb 20, 2002 8:43am
Subject: RE: broken wheel stud removal
Hi Alan
Not sure what Jeep you have. Not sure if you have drum or disk brakes on the back. But you should be able to hammer (maybe use a punch) to knock the old stud out. Then push the new one in from the back and use a open nut (one the stud can go all the way though) to pull the new stud all the way in to mounting hole.
Randy
Randall A. Mutter 95XJ, 76 CJ-7
ramaz@cox.net
Thank goodness there are no 12 step programs for Jeeping...
-----Original Message-----
From: Alan Doty [mailto:doty34@atc-enviro.com]
Sent: Wednesday, February 20, 2002 9:35 AM
To: JEEP CLUB
Subject: [az_vjc] broken wheel stud removal
Does anyone have any good ideas on the removal of a broken wheel stud on the rear axle?
Alan
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
43321 From: Alan Doty <doty34@a...>
Date: Wed Feb 20, 2002 8:47am
Subject: wheel stud question
I have a 99tj with a dana 35 in back and the stock drum brakes.
alan
43322 From: David Withers <dr_ww@h...>
Date: Wed Feb 20, 2002 8:52am
Subject: Looking for a 79 cj-5 expert or someone familiar with that model jeep?
Please reply or call me at the #'s below
David R. W. Withers
Desk: 480.551.4667
Mobile: 480.215.6992
43323 From: scottcmusgrave <scottcmusgrave@y...>
Date: Wed Feb 20, 2002 8:56am
Subject: 2" Front Coil Sprong Spacers For 96XJ
Anybody out there have Black 2" front spring spacers for a 96 XJ
willing to trade for the same but in red. let me know.
Thanks,
43324 From: Roger Tomas <tomasr@a...>
Date: Wed Feb 20, 2002 9:28am
Subject: Re: broken wheel stud removal
First choice would be to press it out. If there's enough room behind
the axle flange, use a large c-clamp and a socket on the back side of
the flange. Or, a better choice might be the Harbor Freight u-joint
tool that gets mentioned on this list quite frequently. You may need
to remove the brake shoes to create enough room to work with.
Last choice would be to pound it out. However, there's definitely not
enough room behind the flange to pound in the new stud so you probably
need to use the option above for that.
-Roger
43325 From: David Withers <dr_ww@h...>
Date: Wed Feb 20, 2002 9:48am
Subject: Temporary location of the jack handle pictures
sorry it's so slow, but it's temporary and free
http://withers.ppnhost.ws/Jack_handle/index.htm
David R. W. Withers
Desk: 480.551.4667
Mobile: 480.215.6992
43326 From: jeepin_in_az <jeepin_in_az@y...>
Date: Wed Feb 20, 2002 9:52am
Subject: Re: JB SYE Questions
If you go with Dicks, or maybe others, they can make your driveshaft
in about 2-3 hours, so you really won't be down that much.
Mike
--- In az_vjc@y..., Roger Tomas <tomasr@a...> wrote:
> As others have said, it depends on what tranny, what rear axle, how
much
> lift including how much sag due to extra weight you may have added
to
> your Jeep and due to how much you've abused your springs. Note that
> if your springs are new, they're probably taller now than they may
be a
> year from now.
>
> Of course, you'll be removing the t-case drop so that will also
increase
> the length of the driveshaft you need.
>
> I think it is best to do all your mods and then measure. This will
put
> your Jeep out of commission but only for a day.
>
> -Roger
>
> "Laliberty, Jason (SCP)" wrote:
> >
> > So I finally purchased the SYE kit. My questions is do I have to
wait to install it to find out what the drive shaft length will be.
I didn't know if someone could tell me the length (Maybe they have
the same setup as I do)
> >
> > I have 4.5 RE coilsprings. I still have factory control arms. I
have dropped the transfercase.
43327 From: DesertJeep <joey@d...>
Date: Wed Feb 20, 2002 9:55am
Subject: RE: Re: JB SYE Questions
if at all with front wheel drive.
Joey K
-----Original Message-----
From: jeepin_in_az [mailto:jeepin_in_az@y...]
Sent: Wednesday, February 20, 2002 10:53 AM
To: az_vjc@yahoogroups.com
Subject: [az_vjc] Re: JB SYE Questions
If you go with Dicks, or maybe others, they can make your driveshaft
in about 2-3 hours, so you really won't be down that much.
Mike
--- In az_vjc@y..., Roger Tomas <tomasr@a...> wrote:
> As others have said, it depends on what tranny, what rear axle, how
much
> lift including how much sag due to extra weight you may have added
to
> your Jeep and due to how much you've abused your springs. Note that
> if your springs are new, they're probably taller now than they may
be a
> year from now.
>
> Of course, you'll be removing the t-case drop so that will also
increase
> the length of the driveshaft you need.
>
> I think it is best to do all your mods and then measure. This will
put
> your Jeep out of commission but only for a day.
>
> -Roger
>
> "Laliberty, Jason (SCP)" wrote:
> >
> > So I finally purchased the SYE kit. My questions is do I have to
wait to install it to find out what the drive shaft length will be.
I didn't know if someone could tell me the length (Maybe they have
the same setup as I do)
> >
> > I have 4.5 RE coilsprings. I still have factory control arms. I
have dropped the transfercase.
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
43328 From: wishmaaker <wishmaaker@y...>
Date: Wed Feb 20, 2002 10:01am
Subject: Re: [FS] Bestop Supertop for TJ with full doors
Is it the new double stitch top?
--- In az_vjc@y..., AzVJC Website <azvjc@a...> wrote:
>
43329 From: Daryl Faust <louddog71@y...>
Date: Wed Feb 20, 2002 10:16am
Subject: Re: does seem like we have a lot of vendors joininglately or is it me?
So emails from stores posting jeep parts for sale are
not OK for this forum.
However it is OK to advertise rooms for rent or
suggest that people not buy foriegn cars, or all the
other non-jeep and/or useless emails that go through
here?
--- Mike & Karen Acuna <macunasprint@e...>
wrote:
> I agree, put a stop to this madness. They could
> e-mail any info to
> interested parties.
> Mike
>
> Chris Krieg wrote:
>
> > OK. Jason and Ron at TuffToys are getting out of
> hand. So far, they
> > have posted 11 ads. I don't think it is
> appropriate to post their
> > entire used inventory on our site. A post saying
> they have many parts
> > and to call them might be OK, but he is using our
> site to advertise
> > everything he has. That pushes all the legit
> member forsale posts to
> > the bottom of the database.
> >
> > Chris
> >
> >
> > From: Chris Krieg <rv6a@m...>
> > Date: Tue, 19 Feb 2002 14:02:25 -0700
> > To: Keith Haw <khaw@n...>, "'AZ_VJC'"
> > <az_vjc@yahoogroups.com>, David Withers
> <dr_ww@h...>
> > Subject: Re: [az_vjc] does seem like we have
> a lot of
> > vendors joining lately or is it me?
> >
> >
> > Yeah, as long as they are givng us a good
> discount it might
> > be OK as long as it doesn't get out of hand
> and clog up the
> > for sale database. If they are just using us
> to advertise
> > normal priced stuff, then send them packing.
> >
> > Chris K
> >
> >
> > From: "Keith Haw" <khaw@n...>
> > Date: Tue, 19 Feb 2002 12:52:51 -0700
> > To: "'AZ_VJC'" <az_vjc@yahoogroups.com>,
> "David
> > Withers" <dr_ww@h...>
> > Subject: Re: [az_vjc] does seem like we
> have a lot
> > of vendors joining lately or is it me?
> >
> >
> > It's OK with me. Seems like they all
> give us a
> > discount!
> > hint-hint :)
> >
> > Keith
> >
> >
> > ----- Original Message -----
> > From: David Withers
> > <mailto:dr_ww@h...>
> > To: 'AZ_VJC'
> > <mailto:az_vjc@yahoogroups.com>
> > Sent: Tuesday, February 19, 2002
> 12:44
> > PM
> > Subject: [az_vjc] does seem like we
> have
> > a lot of vendors joining lately or
> is it
> > me?
> >
> > 4 wheelers
> > tuff toys
> > gloecco
> > daystar
> > just to name a few
> >
> > David R. W. Withers
> > Desk: 480.551.4667
> > Mobile: 480.215.6992
> >
> >
> >
> > Your use of Yahoo! Groups is
> subject to
> > the Yahoo! Terms of Service
> > <http://docs.yahoo.com/info/terms/>
> .
> >
> >
> > Your use of Yahoo! Groups is subject to
> the Yahoo!
> > Terms of Service
> > <http://docs.yahoo.com/info/terms/> .
> >
> > Your use of Yahoo! Groups is subject to the
> Yahoo! Terms of
> > Service <http://docs.yahoo.com/info/terms/> .
> >
> > Your use of Yahoo! Groups is subject to the Yahoo!
> Terms of Service.
>
__________________________________________________
Do You Yahoo!?
Yahoo! Sports - Coverage of the 2002 Olympic Games
http://sports.yahoo.com
43330 From: AzVJC Website <azvjc@a...>
Date: Wed Feb 20, 2002 10:29am
Subject: [FS] amc 360
Price: $600
Contact: 480 695 4737
The motor is complete and ran exellent when i removed it from a 79 wagoneer. I intended on puting it in my cj but have decided to stick with my 304.
Jason Enyart
43331 From: jeepin_in_az <jeepin_in_az@y...>
Date: Wed Feb 20, 2002 10:30am
Subject: Re: does seem like we have a lot of vendors joininglately or is it me?
I take it as a post from a vendor who is trying to make money on
parts that are rediculously priced. They are not helping anyone in
the group by ripping us off. I believe (just my opinion) that the
OT, or atleast most of the OT posts are to inform and help us as a
group. Some ones useless mail to you is gold to someone else.
Filter out the OT posts through your e-mail, I know some members do
it, and it is not that hard.
Mike Baney
--- In az_vjc@y..., Daryl Faust <louddog71@y...> wrote:
> So emails from stores posting jeep parts for sale are
> not OK for this forum.
> However it is OK to advertise rooms for rent or
> suggest that people not buy foriegn cars, or all the
> other non-jeep and/or useless emails that go through
> here?
>
> --- Mike & Karen Acuna <macunasprint@e...>
> wrote:
> > I agree, put a stop to this madness. They could
> > e-mail any info to
> > interested parties.
> > Mike
> >
> > Chris Krieg wrote:
> >
> > > OK. Jason and Ron at TuffToys are getting out of
> > hand. So far, they
> > > have posted 11 ads. I don't think it is
> > appropriate to post their
> > > entire used inventory on our site. A post saying
> > they have many parts
> > > and to call them might be OK, but he is using our
> > site to advertise
> > > everything he has. That pushes all the legit
> > member forsale posts to
> > > the bottom of the database.
> > >
> > > Chris
> > >
> > >
> > > From: Chris Krieg <rv6a@m...>
> > > Date: Tue, 19 Feb 2002 14:02:25 -0700
> > > To: Keith Haw <khaw@n...>, "'AZ_VJC'"
> > > <az_vjc@y...>, David Withers
> > <dr_ww@h...>
> > > Subject: Re: [az_vjc] does seem like we have
> > a lot of
> > > vendors joining lately or is it me?
> > >
> > >
> > > Yeah, as long as they are givng us a good
> > discount it might
> > > be OK as long as it doesn't get out of hand
> > and clog up the
> > > for sale database. If they are just using us
> > to advertise
> > > normal priced stuff, then send them packing.
> > >
> > > Chris K
> > >
> > >
> > > From: "Keith Haw" <khaw@n...>
> > > Date: Tue, 19 Feb 2002 12:52:51 -0700
> > > To: "'AZ_VJC'" <az_vjc@y...>,
> > "David
> > > Withers" <dr_ww@h...>
> > > Subject: Re: [az_vjc] does seem like we
> > have a lot
> > > of vendors joining lately or is it me?
> > >
> > >
> > > It's OK with me. Seems like they all
> > give us a
> > > discount!
> > > hint-hint :)
> > >
> > > Keith
> > >
> > >
> > > ----- Original Message -----
> > > From: David Withers
> > > <mailto:dr_ww@h...>
> > > To: 'AZ_VJC'
> > > <mailto:az_vjc@y...>
> > > Sent: Tuesday, February 19, 2002
> > 12:44
> > > PM
> > > Subject: [az_vjc] does seem like we
> > have
> > > a lot of vendors joining lately or
> > is it
> > > me?
> > >
> > > 4 wheelers
> > > tuff toys
> > > gloecco
> > > daystar
> > > just to name a few
> > >
> > > David R. W. Withers
> > > Desk: 480.551.4667
> > > Mobile: 480.215.6992
> > >
> > >
> > >
> > > Your use of Yahoo! Groups is
> > subject to
> > > the Yahoo! Terms of Service
> > > <http://docs.yahoo.com/info/terms/>
> > .
> > >
> > >
> > > Your use of Yahoo! Groups is subject to
> > the Yahoo!
> > > Terms of Service
> > > <http://docs.yahoo.com/info/terms/> .
> > >
> > > Your use of Yahoo! Groups is subject to the
> > Yahoo! Terms of
> > > Service <http://docs.yahoo.com/info/terms/> .
> > >
> > > Your use of Yahoo! Groups is subject to the Yahoo!
> > Terms of Service.
> >
>
>
> __________________________________________________
> Do You Yahoo!?
> Yahoo! Sports - Coverage of the 2002 Olympic Games
> http://sports.yahoo.com
43332 From: AzVJC Website <azvjc@a...>
Date: Wed Feb 20, 2002 10:32am
Subject: [FS] cj and yj parts, trans, engine,interior, etc.
Price: 5-500
Contact: 480 695 4737
I have a variety of cj and yj parts including engines, transmissions, interior, electrical, axels etc.
Jason Enyart
43333 From: wishmaaker <wishmaaker@y...>
Date: Wed Feb 20, 2002 10:34am
Subject: Re: does seem like we have a lot of vendors joininglately or is it me?
If it causes some type of disturbance then no its not okay. And
thats what it did, that would be my two cents!
--- In az_vjc@y..., Daryl Faust <louddog71@y...> wrote:
> So emails from stores posting jeep parts for sale are
> not OK for this forum.
> However it is OK to advertise rooms for rent or
> suggest that people not buy foriegn cars, or all the
> other non-jeep and/or useless emails that go through
> here?
>
> --- Mike & Karen Acuna <macunasprint@e...>
> wrote:
> > I agree, put a stop to this madness. They could
> > e-mail any info to
> > interested parties.
> > Mike
> >
> > Chris Krieg wrote:
> >
> > > OK. Jason and Ron at TuffToys are getting out of
> > hand. So far, they
> > > have posted 11 ads. I don't think it is
> > appropriate to post their
> > > entire used inventory on our site. A post saying
> > they have many parts
> > > and to call them might be OK, but he is using our
> > site to advertise
> > > everything he has. That pushes all the legit
> > member forsale posts to
> > > the bottom of the database.
> > >
> > > Chris
> > >
> > >
> > > From: Chris Krieg <rv6a@m...>
> > > Date: Tue, 19 Feb 2002 14:02:25 -0700
> > > To: Keith Haw <khaw@n...>, "'AZ_VJC'"
> > > <az_vjc@y...>, David Withers
> > <dr_ww@h...>
> > > Subject: Re: [az_vjc] does seem like we have
> > a lot of
> > > vendors joining lately or is it me?
> > >
> > >
> > > Yeah, as long as they are givng us a good
> > discount it might
> > > be OK as long as it doesn't get out of hand
> > and clog up the
> > > for sale database. If they are just using us
> > to advertise
> > > normal priced stuff, then send them packing.
> > >
> > > Chris K
> > >
> > >
> > > From: "Keith Haw" <khaw@n...>
> > > Date: Tue, 19 Feb 2002 12:52:51 -0700
> > > To: "'AZ_VJC'" <az_vjc@y...>,
> > "David
> > > Withers" <dr_ww@h...>
> > > Subject: Re: [az_vjc] does seem like we
> > have a lot
> > > of vendors joining lately or is it me?
> > >
> > >
> > > It's OK with me. Seems like they all
> > give us a
> > > discount!
> > > hint-hint :)
> > >
> > > Keith
> > >
> > >
> > > ----- Original Message -----
> > > From: David Withers
> > > <mailto:dr_ww@h...>
> > > To: 'AZ_VJC'
> > > <mailto:az_vjc@y...>
> > > Sent: Tuesday, February 19, 2002
> > 12:44
> > > PM
> > > Subject: [az_vjc] does seem like we
> > have
> > > a lot of vendors joining lately or
> > is it
> > > me?
> > >
> > > 4 wheelers
> > > tuff toys
> > > gloecco
> > > daystar
> > > just to name a few
> > >
> > > David R. W. Withers
> > > Desk: 480.551.4667
> > > Mobile: 480.215.6992
> > >
> > >
> > >
> > > Your use of Yahoo! Groups is
> > subject to
> > > the Yahoo! Terms of Service
> > > <http://docs.yahoo.com/info/terms/>
> > .
> > >
> > >
> > > Your use of Yahoo! Groups is subject to
> > the Yahoo!
> > > Terms of Service
> > > <http://docs.yahoo.com/info/terms/> .
> > >
> > > Your use of Yahoo! Groups is subject to the
> > Yahoo! Terms of
> > > Service <http://docs.yahoo.com/info/terms/> .
> > >
> > > Your use of Yahoo! Groups is subject to the Yahoo!
> > Terms of Service.
> >
>
>
> __________________________________________________
> Do You Yahoo!?
> Yahoo! Sports - Coverage of the 2002 Olympic Games
> http://sports.yahoo.com
43334 From: Beckham, Michael <Michael.Beckham@b...>
Date: Wed Feb 20, 2002 11:01am
Subject: RE: Re: does seem like we have a lot of vendors joiningl ately or is it me?
Just to make some more noise, let's not take ourselves too seriously, (we
might be mistaken for ARCA) If the intent is to help, who cares? If the
content doesn't interest you, don't read it. I myself am a rational
anarchist. If YOU need rules to keep yourslef out of trouble, OK, I'll look
at them, and if they don't restrict my freedom, I'll tolerate them. (read
ignore) But since I am a basically quiet guy, not looking for trouble, they
really don't affect me. Let's not over-react.......
-----Original Message-----
From: wishmaaker [mailto:wishmaaker@y...]
Sent: Wednesday, February 20, 2002 11:35 AM
To: az_vjc@yahoogroups.com
Subject: [az_vjc] Re: does seem like we have a lot of vendors
joininglately or is it me?
If it causes some type of disturbance then no its not okay. And
thats what it did, that would be my two cents!
--- In az_vjc@y..., Daryl Faust <louddog71@y...> wrote:
> So emails from stores posting jeep parts for sale are
> not OK for this forum.
> However it is OK to advertise rooms for rent or
> suggest that people not buy foriegn cars, or all the
> other non-jeep and/or useless emails that go through
> here?
>
> --- Mike & Karen Acuna <macunasprint@e...>
> wrote:
> > I agree, put a stop to this madness. They could
> > e-mail any info to
> > interested parties.
> > Mike
> >
> > Chris Krieg wrote:
> >
> > > OK. Jason and Ron at TuffToys are getting out of
> > hand. So far, they
> > > have posted 11 ads. I don't think it is
> > appropriate to post their
> > > entire used inventory on our site. A post saying
> > they have many parts
> > > and to call them might be OK, but he is using our
> > site to advertise
> > > everything he has. That pushes all the legit
> > member forsale posts to
> > > the bottom of the database.
> > >
> > > Chris
> > >
> > >
> > > From: Chris Krieg <rv6a@m...>
> > > Date: Tue, 19 Feb 2002 14:02:25 -0700
> > > To: Keith Haw <khaw@n...>, "'AZ_VJC'"
> > > <az_vjc@y...>, David Withers
> > <dr_ww@h...>
> > > Subject: Re: [az_vjc] does seem like we have
> > a lot of
> > > vendors joining lately or is it me?
> > >
> > >
> > > Yeah, as long as they are givng us a good
> > discount it might
> > > be OK as long as it doesn't get out of hand
> > and clog up the
> > > for sale database. If they are just using us
> > to advertise
> > > normal priced stuff, then send them packing.
> > >
> > > Chris K
> > >
> > >
> > > From: "Keith Haw" <khaw@n...>
> > > Date: Tue, 19 Feb 2002 12:52:51 -0700
> > > To: "'AZ_VJC'" <az_vjc@y...>,
> > "David
> > > Withers" <dr_ww@h...>
> > > Subject: Re: [az_vjc] does seem like we
> > have a lot
> > > of vendors joining lately or is it me?
> > >
> > >
> > > It's OK with me. Seems like they all
> > give us a
> > > discount!
> > > hint-hint :)
> > >
> > > Keith
> > >
> > >
> > > ----- Original Message -----
> > > From: David Withers
> > > <mailto:dr_ww@h...>
> > > To: 'AZ_VJC'
> > > <mailto:az_vjc@y...>
> > > Sent: Tuesday, February 19, 2002
> > 12:44
> > > PM
> > > Subject: [az_vjc] does seem like we
> > have
> > > a lot of vendors joining lately or
> > is it
> > > me?
> > >
> > > 4 wheelers
> > > tuff toys
> > > gloecco
> > > daystar
> > > just to name a few
> > >
> > > David R. W. Withers
> > > Desk: 480.551.4667
> > > Mobile: 480.215.6992
> > >
> > >
> > >
> > > Your use of Yahoo! Groups is
> > subject to
> > > the Yahoo! Terms of Service
> > > <http://docs.yahoo.com/info/terms/>
> > .
> > >
> > >
> > > Your use of Yahoo! Groups is subject to
> > the Yahoo!
> > > Terms of Service
> > > <http://docs.yahoo.com/info/terms/> .
> > >
> > > Your use of Yahoo! Groups is subject to the
> > Yahoo! Terms of
> > > Service <http://docs.yahoo.com/info/terms/> .
> > >
> > > Your use of Yahoo! Groups is subject to the Yahoo!
> > Terms of Service.
> >
>
>
> __________________________________________________
> Do You Yahoo!?
> Yahoo! Sports - Coverage of the 2002 Olympic Games
> http://sports.yahoo.com
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
43310 From: jeepin_in_az <jeepin_in_az@y...>
Date: Wed Feb 20, 2002 8:13am
Subject: Re: -----ROOM FOR RENT------
Somebody was just looking for a place to rent, seems like he is in
Chandler.....might want to check back to last week......it was an OT
post, should be easy to find.
Mike Baney
--- In az_vjc@y..., "kmichael02" <kmichael02@y...> wrote:
> In Tempe...3bd 2 bath, huge back yard, garage...
>
> figured I'd throw this out to some jeepers first..
>
> bout 3 miles from the asu.
>
> Rent 345
>
> any interest email me directly
>
> kmichael02@y...
>
> mike
--------------------------------------------------------------------------------
ADVERTISEMENT
43311 From: David R. W. Withers <dr_ww@h...>
Date: Wed Feb 20, 2002 8:19am
Subject: RE: anyone?lift kit input...
Oops I meant to say you won't want to replace
-----Original Message-----
From: David R. W. Withers [mailto:dr_ww@h...]
Sent: Wednesday, February 20, 2002 8:59 AM
To: 'Brian Peletz'; az_vjc@yahoogroups.com
Subject: RE: [az_vjc] anyone?lift kit input...
The best advice I got was when I asked the same question was: "save your
money and by one lift you want to replace." What type of vehicle is it
for?
-----Original Message-----
From: Brian Peletz [mailto:big86er@y...]
Sent: Tuesday, February 19, 2002 10:11 PM
To: az_vjc@yahoogroups.com
Subject: [az_vjc] anyone?lift kit input...
Hi,
Been looking at 4" lift kits and have narrowed it
down to these possibilities. Super lift, rough
country, and trail master. These are the $500 starter
kits. Does anyone have experience with these. I
would like to know about reliability quality and all
those other things everybody wants to get out of it.
I am also looking for the option to go taller if I
feel the urge and dont want a lot of parts to throw
away if I do. I also plan on going to a full kit when
I get the money and would like to know if anyone has
experience on which would be most economical.
Thanks
Brian
__________________________________________________
Do You Yahoo!?
Yahoo! Sports - Coverage of the 2002 Olympic Games
http://sports.yahoo.com
Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
43312 From: jaylalib <jaylalib@h...>
Date: Wed Feb 20, 2002 8:17am
Subject: Re: JB SYE Questions
Hi Les,
I just called today and they quoted me $200+ tax.
Jason
--- In az_vjc@y..., "paparoach85251" <lespaparoach@m...> wrote:
> Mike,
> I am getting ready to install a SYE of my own. How much did the new
> cv drivshaft cost you from Dick's Driveshaft? Do you recommend them
> or is there somewhere else in town which may be better?
>
> Thanks, Les
>
> --- In az_vjc@y..., "jeepin_in_az" <jeepin_in_az@y...> wrote:
> > Hey Jason, the length is going to depend on what tranny and rear
> axle
> > you have. I have the manual and 44 rear, my length was 15.5", as
> > where James T has the auto and the 35, and his was something like
> > 17.75". It is best to wait to measure it though.
> >
> > Mike Baney
> >
> >
> >
> > --- In az_vjc@y..., "Laliberty, Jason (SCP)"
<jason.laliberty@f...>
> > wrote:
> > > So I finally purchased the SYE kit. My questions is do I have
to
> > wait to install it to find out what the drive shaft length will
> be.
> > I didn't know if someone could tell me the length (Maybe they
have
> > the same setup as I do)
> > >
> > > I have 4.5 RE coilsprings. I still have factory control arms.
I
> > have dropped the transfercase.
> > >
> > > Thanks,
> > >
> > > Jason LaLiberty
> > > 99' TJ
> > > www.greenmachine.alloffroad.com
> > >
> > > P.S.
> > >
> > > Hey Les, thanks for the heads up on the sale!!
43313 From: David R. W. Withers <dr_ww@h...>
Date: Wed Feb 20, 2002 8:20am
Subject: RE: Re: JB SYE Questions
Mike that weekend you had it done, you told me $180. Same weekend you
picked up expo tickets
David
-----Original Message-----
From: jeepin_in_az [mailto:jeepin_in_az@y...]
Sent: Wednesday, February 20, 2002 9:12 AM
To: az_vjc@yahoogroups.com
Subject: [az_vjc] Re: JB SYE Questions
I highly recommend Dicks, be warned CASH ONLY. I think it was $180, or
was it $80??? James?? Wanna say $80, but damn, can't remember.....
Mike
--- In az_vjc@y..., "paparoach85251" <lespaparoach@m...> wrote:
> Mike,
> I am getting ready to install a SYE of my own. How much did the new cv
> drivshaft cost you from Dick's Driveshaft? Do you recommend them or is
> there somewhere else in town which may be better?
>
> Thanks, Les
>
> --- In az_vjc@y..., "jeepin_in_az" <jeepin_in_az@y...> wrote:
> > Hey Jason, the length is going to depend on what tranny and rear
> axle
> > you have. I have the manual and 44 rear, my length was 15.5", as
> > where James T has the auto and the 35, and his was something like
> > 17.75". It is best to wait to measure it though.
> >
> > Mike Baney
> >
> >
> >
> > --- In az_vjc@y..., "Laliberty, Jason (SCP)"
<jason.laliberty@f...>
> > wrote:
> > > So I finally purchased the SYE kit. My questions is do I have
to
> > wait to install it to find out what the drive shaft length will
> be.
> > I didn't know if someone could tell me the length (Maybe they
have
> > the same setup as I do)
> > >
> > > I have 4.5 RE coilsprings. I still have factory control arms.
I
> > have dropped the transfercase.
> > >
> > > Thanks,
> > >
> > > Jason LaLiberty
> > > 99' TJ
> > > www.greenmachine.alloffroad.com
> > >
> > > P.S.
> > >
> > > Hey Les, thanks for the heads up on the sale!!
Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
43314 From: Mike Baney <jeepin_in_az@y...>
Date: Wed Feb 20, 2002 8:19am
Subject: RE: Re: JB SYE Questions
Ok, it was $180....
Mike
--- "David R. W. Withers" <dr_ww@h...> wrote:
> Mike that weekend you had it done, you told me $180. Same weekend you
> picked up expo tickets
> David
>
> -----Original Message-----
> From: jeepin_in_az [mailto:jeepin_in_az@y...]
> Sent: Wednesday, February 20, 2002 9:12 AM
> To: az_vjc@yahoogroups.com
> Subject: [az_vjc] Re: JB SYE Questions
>
>
> I highly recommend Dicks, be warned CASH ONLY. I think it was $180, or
> was it $80??? James?? Wanna say $80, but damn, can't remember.....
>
> Mike
>
>
> --- In az_vjc@y..., "paparoach85251" <lespaparoach@m...> wrote:
> > Mike,
> > I am getting ready to install a SYE of my own. How much did the new cv
>
> > drivshaft cost you from Dick's Driveshaft? Do you recommend them or is
>
> > there somewhere else in town which may be better?
> >
> > Thanks, Les
> >
> > --- In az_vjc@y..., "jeepin_in_az" <jeepin_in_az@y...> wrote:
> > > Hey Jason, the length is going to depend on what tranny and rear
> > axle
> > > you have. I have the manual and 44 rear, my length was 15.5", as
> > > where James T has the auto and the 35, and his was something like
> > > 17.75". It is best to wait to measure it though.
> > >
> > > Mike Baney
> > >
> > >
> > >
> > > --- In az_vjc@y..., "Laliberty, Jason (SCP)"
> <jason.laliberty@f...>
> > > wrote:
> > > > So I finally purchased the SYE kit. My questions is do I have
> to
> > > wait to install it to find out what the drive shaft length will
> > be.
> > > I didn't know if someone could tell me the length (Maybe they
> have
> > > the same setup as I do)
> > > >
> > > > I have 4.5 RE coilsprings. I still have factory control arms.
> I
> > > have dropped the transfercase.
> > > >
> > > > Thanks,
> > > >
> > > > Jason LaLiberty
> > > > 99' TJ
> > > > www.greenmachine.alloffroad.com
> > > >
> > > > P.S.
> > > >
> > > > Hey Les, thanks for the heads up on the sale!!
>
>
>
>
> Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
>
>
__________________________________________________
Do You Yahoo!?
Yahoo! Sports - Coverage of the 2002 Olympic Games
http://sports.yahoo.com
43315 From: jeepin_in_az <jeepin_in_az@y...>
Date: Wed Feb 20, 2002 8:24am
Subject: Re: anyone?lift kit input...
To be honest Brian, David gave you the best answer. If you already
plan on going bigger, but don't have the cash for it, WAIT. If you
have $500 burning a hole in your pocket, start with things you will
need anyway that are not included in a kit. SYE, aftermarket tire
carier, winch, front bumpers. Why waste the money on a lift that you
are going to replace anyway? Also, you will prob go with bigger
tires too, so there is another added expense, a second set of tires.
I know it is hard to wait, but think of the money and labor you will
save yourself. If anything, buy a budget boost (coil spacers) just
to get you out of stock size.
Mike Baney
n az_vjc@y..., "David R. W. Withers" <dr_ww@h...> wrote:
>
> Oops I meant to say you won't want to replace
> -----Original Message-----
> From: David R. W. Withers [mailto:dr_ww@h...]
> Sent: Wednesday, February 20, 2002 8:59 AM
> To: 'Brian Peletz'; az_vjc@y...
> Subject: RE: [az_vjc] anyone?lift kit input...
>
>
> The best advice I got was when I asked the same question was: "save
your
> money and by one lift you want to replace." What type of vehicle is
it
> for?
>
> -----Original Message-----
> From: Brian Peletz [mailto:big86er@y...]
> Sent: Tuesday, February 19, 2002 10:11 PM
> To: az_vjc@y...
> Subject: [az_vjc] anyone?lift kit input...
>
>
> Hi,
> Been looking at 4" lift kits and have narrowed it
> down to these possibilities. Super lift, rough
> country, and trail master. These are the $500 starter
> kits. Does anyone have experience with these. I
> would like to know about reliability quality and all
> those other things everybody wants to get out of it.
> I am also looking for the option to go taller if I
> feel the urge and dont want a lot of parts to throw
> away if I do. I also plan on going to a full kit when
> I get the money and would like to know if anyone has
> experience on which would be most economical.
>
> Thanks
> Brian
>
> __________________________________________________
> Do You Yahoo!?
> Yahoo! Sports - Coverage of the 2002 Olympic Games
> http://sports.yahoo.com
>
>
>
> Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
>
>
>
>
>
> Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
43316 From: jeepin_in_az <jeepin_in_az@y...>
Date: Wed Feb 20, 2002 8:25am
Subject: Re: JB SYE Questions
You forgot to mention that AzVJC discount......
Mike Baney
--- In az_vjc@y..., "jaylalib" <jaylalib@h...> wrote:
> Hi Les,
>
> I just called today and they quoted me $200+ tax.
>
> Jason
>
>
>
>
> --- In az_vjc@y..., "paparoach85251" <lespaparoach@m...> wrote:
> > Mike,
> > I am getting ready to install a SYE of my own. How much did the
new
> > cv drivshaft cost you from Dick's Driveshaft? Do you recommend
them
> > or is there somewhere else in town which may be better?
> >
> > Thanks, Les
> >
> > --- In az_vjc@y..., "jeepin_in_az" <jeepin_in_az@y...> wrote:
> > > Hey Jason, the length is going to depend on what tranny and
rear
> > axle
> > > you have. I have the manual and 44 rear, my length was 15.5",
as
> > > where James T has the auto and the 35, and his was something
like
> > > 17.75". It is best to wait to measure it though.
> > >
> > > Mike Baney
> > >
> > >
> > >
> > > --- In az_vjc@y..., "Laliberty, Jason (SCP)"
> <jason.laliberty@f...>
> > > wrote:
> > > > So I finally purchased the SYE kit. My questions is do I
have
> to
> > > wait to install it to find out what the drive shaft length will
> > be.
> > > I didn't know if someone could tell me the length (Maybe they
> have
> > > the same setup as I do)
> > > >
> > > > I have 4.5 RE coilsprings. I still have factory control
arms.
> I
> > > have dropped the transfercase.
> > > >
> > > > Thanks,
> > > >
> > > > Jason LaLiberty
> > > > 99' TJ
> > > > www.greenmachine.alloffroad.com
> > > >
> > > > P.S.
> > > >
> > > > Hey Les, thanks for the heads up on the sale!!
43317 From: Scott Thomas <sthomas@a...>
Date: Wed Feb 20, 2002 8:33am
Subject: RE: Re: anyone?lift kit input...
I have to agree with Mike 100%. I am currently working on getting the stuff
for my 3rd lift. I would have just wanted and saved my money I would
already be there and it would be the way that I want it to look. I bought
my 2" lift and ran it for 2 1/2 months, before going bigger. Good luck.
Scott Thomas
97' Tj
-----Original Message-----
From: jeepin_in_az [mailto:jeepin_in_az@y...]
Sent: Wednesday, February 20, 2002 9:24 AM
To: az_vjc@yahoogroups.com
Subject: [az_vjc] Re: anyone?lift kit input...
To be honest Brian, David gave you the best answer. If you already
plan on going bigger, but don't have the cash for it, WAIT. If you
have $500 burning a hole in your pocket, start with things you will
need anyway that are not included in a kit. SYE, aftermarket tire
carier, winch, front bumpers. Why waste the money on a lift that you
are going to replace anyway? Also, you will prob go with bigger
tires too, so there is another added expense, a second set of tires.
I know it is hard to wait, but think of the money and labor you will
save yourself. If anything, buy a budget boost (coil spacers) just
to get you out of stock size.
Mike Baney
n az_vjc@y..., "David R. W. Withers" <dr_ww@h...> wrote:
>
> Oops I meant to say you won't want to replace
> -----Original Message-----
> From: David R. W. Withers [mailto:dr_ww@h...]
> Sent: Wednesday, February 20, 2002 8:59 AM
> To: 'Brian Peletz'; az_vjc@y...
> Subject: RE: [az_vjc] anyone?lift kit input...
>
>
> The best advice I got was when I asked the same question was: "save
your
> money and by one lift you want to replace." What type of vehicle is
it
> for?
>
> -----Original Message-----
> From: Brian Peletz [mailto:big86er@y...]
> Sent: Tuesday, February 19, 2002 10:11 PM
> To: az_vjc@y...
> Subject: [az_vjc] anyone?lift kit input...
>
>
> Hi,
> Been looking at 4" lift kits and have narrowed it
> down to these possibilities. Super lift, rough
> country, and trail master. These are the $500 starter
> kits. Does anyone have experience with these. I
> would like to know about reliability quality and all
> those other things everybody wants to get out of it.
> I am also looking for the option to go taller if I
> feel the urge and dont want a lot of parts to throw
> away if I do. I also plan on going to a full kit when
> I get the money and would like to know if anyone has
> experience on which would be most economical.
>
> Thanks
> Brian
>
> __________________________________________________
> Do You Yahoo!?
> Yahoo! Sports - Coverage of the 2002 Olympic Games
> http://sports.yahoo.com
>
>
>
> Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
>
>
>
>
>
> Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
43318 From: Roger Tomas <tomasr@a...>
Date: Wed Feb 20, 2002 8:30am
Subject: Re: JB SYE Questions
As others have said, it depends on what tranny, what rear axle, how much
lift including how much sag due to extra weight you may have added to
your Jeep and due to how much you've abused your springs. Note that
if your springs are new, they're probably taller now than they may be a
year from now.
Of course, you'll be removing the t-case drop so that will also increase
the length of the driveshaft you need.
I think it is best to do all your mods and then measure. This will put
your Jeep out of commission but only for a day.
-Roger
"Laliberty, Jason (SCP)" wrote:
>
> So I finally purchased the SYE kit. My questions is do I have to wait to install it to find out what the drive shaft length will be. I didn't know if someone could tell me the length (Maybe they have the same setup as I do)
>
> I have 4.5 RE coilsprings. I still have factory control arms. I have dropped the transfercase.
43319 From: Alan Doty <doty34@a...>
Date: Wed Feb 20, 2002 8:35am
Subject: broken wheel stud removal
Does anyone have any good ideas on the removal of a broken wheel stud on the rear axle?
Alan
43320 From: Randall A.Mutter <ramaz@c...>
Date: Wed Feb 20, 2002 8:43am
Subject: RE: broken wheel stud removal
Hi Alan
Not sure what Jeep you have. Not sure if you have drum or disk brakes on the back. But you should be able to hammer (maybe use a punch) to knock the old stud out. Then push the new one in from the back and use a open nut (one the stud can go all the way though) to pull the new stud all the way in to mounting hole.
Randy
Randall A. Mutter 95XJ, 76 CJ-7
ramaz@cox.net
Thank goodness there are no 12 step programs for Jeeping...
-----Original Message-----
From: Alan Doty [mailto:doty34@atc-enviro.com]
Sent: Wednesday, February 20, 2002 9:35 AM
To: JEEP CLUB
Subject: [az_vjc] broken wheel stud removal
Does anyone have any good ideas on the removal of a broken wheel stud on the rear axle?
Alan
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
43321 From: Alan Doty <doty34@a...>
Date: Wed Feb 20, 2002 8:47am
Subject: wheel stud question
I have a 99tj with a dana 35 in back and the stock drum brakes.
alan
43322 From: David Withers <dr_ww@h...>
Date: Wed Feb 20, 2002 8:52am
Subject: Looking for a 79 cj-5 expert or someone familiar with that model jeep?
Please reply or call me at the #'s below
David R. W. Withers
Desk: 480.551.4667
Mobile: 480.215.6992
43323 From: scottcmusgrave <scottcmusgrave@y...>
Date: Wed Feb 20, 2002 8:56am
Subject: 2" Front Coil Sprong Spacers For 96XJ
Anybody out there have Black 2" front spring spacers for a 96 XJ
willing to trade for the same but in red. let me know.
Thanks,
43324 From: Roger Tomas <tomasr@a...>
Date: Wed Feb 20, 2002 9:28am
Subject: Re: broken wheel stud removal
First choice would be to press it out. If there's enough room behind
the axle flange, use a large c-clamp and a socket on the back side of
the flange. Or, a better choice might be the Harbor Freight u-joint
tool that gets mentioned on this list quite frequently. You may need
to remove the brake shoes to create enough room to work with.
Last choice would be to pound it out. However, there's definitely not
enough room behind the flange to pound in the new stud so you probably
need to use the option above for that.
-Roger
43325 From: David Withers <dr_ww@h...>
Date: Wed Feb 20, 2002 9:48am
Subject: Temporary location of the jack handle pictures
sorry it's so slow, but it's temporary and free
http://withers.ppnhost.ws/Jack_handle/index.htm
David R. W. Withers
Desk: 480.551.4667
Mobile: 480.215.6992
43326 From: jeepin_in_az <jeepin_in_az@y...>
Date: Wed Feb 20, 2002 9:52am
Subject: Re: JB SYE Questions
If you go with Dicks, or maybe others, they can make your driveshaft
in about 2-3 hours, so you really won't be down that much.
Mike
--- In az_vjc@y..., Roger Tomas <tomasr@a...> wrote:
> As others have said, it depends on what tranny, what rear axle, how
much
> lift including how much sag due to extra weight you may have added
to
> your Jeep and due to how much you've abused your springs. Note that
> if your springs are new, they're probably taller now than they may
be a
> year from now.
>
> Of course, you'll be removing the t-case drop so that will also
increase
> the length of the driveshaft you need.
>
> I think it is best to do all your mods and then measure. This will
put
> your Jeep out of commission but only for a day.
>
> -Roger
>
> "Laliberty, Jason (SCP)" wrote:
> >
> > So I finally purchased the SYE kit. My questions is do I have to
wait to install it to find out what the drive shaft length will be.
I didn't know if someone could tell me the length (Maybe they have
the same setup as I do)
> >
> > I have 4.5 RE coilsprings. I still have factory control arms. I
have dropped the transfercase.
43327 From: DesertJeep <joey@d...>
Date: Wed Feb 20, 2002 9:55am
Subject: RE: Re: JB SYE Questions
if at all with front wheel drive.
Joey K
-----Original Message-----
From: jeepin_in_az [mailto:jeepin_in_az@y...]
Sent: Wednesday, February 20, 2002 10:53 AM
To: az_vjc@yahoogroups.com
Subject: [az_vjc] Re: JB SYE Questions
If you go with Dicks, or maybe others, they can make your driveshaft
in about 2-3 hours, so you really won't be down that much.
Mike
--- In az_vjc@y..., Roger Tomas <tomasr@a...> wrote:
> As others have said, it depends on what tranny, what rear axle, how
much
> lift including how much sag due to extra weight you may have added
to
> your Jeep and due to how much you've abused your springs. Note that
> if your springs are new, they're probably taller now than they may
be a
> year from now.
>
> Of course, you'll be removing the t-case drop so that will also
increase
> the length of the driveshaft you need.
>
> I think it is best to do all your mods and then measure. This will
put
> your Jeep out of commission but only for a day.
>
> -Roger
>
> "Laliberty, Jason (SCP)" wrote:
> >
> > So I finally purchased the SYE kit. My questions is do I have to
wait to install it to find out what the drive shaft length will be.
I didn't know if someone could tell me the length (Maybe they have
the same setup as I do)
> >
> > I have 4.5 RE coilsprings. I still have factory control arms. I
have dropped the transfercase.
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
43328 From: wishmaaker <wishmaaker@y...>
Date: Wed Feb 20, 2002 10:01am
Subject: Re: [FS] Bestop Supertop for TJ with full doors
Is it the new double stitch top?
--- In az_vjc@y..., AzVJC Website <azvjc@a...> wrote:
>
43329 From: Daryl Faust <louddog71@y...>
Date: Wed Feb 20, 2002 10:16am
Subject: Re: does seem like we have a lot of vendors joininglately or is it me?
So emails from stores posting jeep parts for sale are
not OK for this forum.
However it is OK to advertise rooms for rent or
suggest that people not buy foriegn cars, or all the
other non-jeep and/or useless emails that go through
here?
--- Mike & Karen Acuna <macunasprint@e...>
wrote:
> I agree, put a stop to this madness. They could
> e-mail any info to
> interested parties.
> Mike
>
> Chris Krieg wrote:
>
> > OK. Jason and Ron at TuffToys are getting out of
> hand. So far, they
> > have posted 11 ads. I don't think it is
> appropriate to post their
> > entire used inventory on our site. A post saying
> they have many parts
> > and to call them might be OK, but he is using our
> site to advertise
> > everything he has. That pushes all the legit
> member forsale posts to
> > the bottom of the database.
> >
> > Chris
> >
> >
> > From: Chris Krieg <rv6a@m...>
> > Date: Tue, 19 Feb 2002 14:02:25 -0700
> > To: Keith Haw <khaw@n...>, "'AZ_VJC'"
> > <az_vjc@yahoogroups.com>, David Withers
> <dr_ww@h...>
> > Subject: Re: [az_vjc] does seem like we have
> a lot of
> > vendors joining lately or is it me?
> >
> >
> > Yeah, as long as they are givng us a good
> discount it might
> > be OK as long as it doesn't get out of hand
> and clog up the
> > for sale database. If they are just using us
> to advertise
> > normal priced stuff, then send them packing.
> >
> > Chris K
> >
> >
> > From: "Keith Haw" <khaw@n...>
> > Date: Tue, 19 Feb 2002 12:52:51 -0700
> > To: "'AZ_VJC'" <az_vjc@yahoogroups.com>,
> "David
> > Withers" <dr_ww@h...>
> > Subject: Re: [az_vjc] does seem like we
> have a lot
> > of vendors joining lately or is it me?
> >
> >
> > It's OK with me. Seems like they all
> give us a
> > discount!
> > hint-hint :)
> >
> > Keith
> >
> >
> > ----- Original Message -----
> > From: David Withers
> > <mailto:dr_ww@h...>
> > To: 'AZ_VJC'
> > <mailto:az_vjc@yahoogroups.com>
> > Sent: Tuesday, February 19, 2002
> 12:44
> > PM
> > Subject: [az_vjc] does seem like we
> have
> > a lot of vendors joining lately or
> is it
> > me?
> >
> > 4 wheelers
> > tuff toys
> > gloecco
> > daystar
> > just to name a few
> >
> > David R. W. Withers
> > Desk: 480.551.4667
> > Mobile: 480.215.6992
> >
> >
> >
> > Your use of Yahoo! Groups is
> subject to
> > the Yahoo! Terms of Service
> > <http://docs.yahoo.com/info/terms/>
> .
> >
> >
> > Your use of Yahoo! Groups is subject to
> the Yahoo!
> > Terms of Service
> > <http://docs.yahoo.com/info/terms/> .
> >
> > Your use of Yahoo! Groups is subject to the
> Yahoo! Terms of
> > Service <http://docs.yahoo.com/info/terms/> .
> >
> > Your use of Yahoo! Groups is subject to the Yahoo!
> Terms of Service.
>
__________________________________________________
Do You Yahoo!?
Yahoo! Sports - Coverage of the 2002 Olympic Games
http://sports.yahoo.com
43330 From: AzVJC Website <azvjc@a...>
Date: Wed Feb 20, 2002 10:29am
Subject: [FS] amc 360
Price: $600
Contact: 480 695 4737
The motor is complete and ran exellent when i removed it from a 79 wagoneer. I intended on puting it in my cj but have decided to stick with my 304.
Jason Enyart
43331 From: jeepin_in_az <jeepin_in_az@y...>
Date: Wed Feb 20, 2002 10:30am
Subject: Re: does seem like we have a lot of vendors joininglately or is it me?
I take it as a post from a vendor who is trying to make money on
parts that are rediculously priced. They are not helping anyone in
the group by ripping us off. I believe (just my opinion) that the
OT, or atleast most of the OT posts are to inform and help us as a
group. Some ones useless mail to you is gold to someone else.
Filter out the OT posts through your e-mail, I know some members do
it, and it is not that hard.
Mike Baney
--- In az_vjc@y..., Daryl Faust <louddog71@y...> wrote:
> So emails from stores posting jeep parts for sale are
> not OK for this forum.
> However it is OK to advertise rooms for rent or
> suggest that people not buy foriegn cars, or all the
> other non-jeep and/or useless emails that go through
> here?
>
> --- Mike & Karen Acuna <macunasprint@e...>
> wrote:
> > I agree, put a stop to this madness. They could
> > e-mail any info to
> > interested parties.
> > Mike
> >
> > Chris Krieg wrote:
> >
> > > OK. Jason and Ron at TuffToys are getting out of
> > hand. So far, they
> > > have posted 11 ads. I don't think it is
> > appropriate to post their
> > > entire used inventory on our site. A post saying
> > they have many parts
> > > and to call them might be OK, but he is using our
> > site to advertise
> > > everything he has. That pushes all the legit
> > member forsale posts to
> > > the bottom of the database.
> > >
> > > Chris
> > >
> > >
> > > From: Chris Krieg <rv6a@m...>
> > > Date: Tue, 19 Feb 2002 14:02:25 -0700
> > > To: Keith Haw <khaw@n...>, "'AZ_VJC'"
> > > <az_vjc@y...>, David Withers
> > <dr_ww@h...>
> > > Subject: Re: [az_vjc] does seem like we have
> > a lot of
> > > vendors joining lately or is it me?
> > >
> > >
> > > Yeah, as long as they are givng us a good
> > discount it might
> > > be OK as long as it doesn't get out of hand
> > and clog up the
> > > for sale database. If they are just using us
> > to advertise
> > > normal priced stuff, then send them packing.
> > >
> > > Chris K
> > >
> > >
> > > From: "Keith Haw" <khaw@n...>
> > > Date: Tue, 19 Feb 2002 12:52:51 -0700
> > > To: "'AZ_VJC'" <az_vjc@y...>,
> > "David
> > > Withers" <dr_ww@h...>
> > > Subject: Re: [az_vjc] does seem like we
> > have a lot
> > > of vendors joining lately or is it me?
> > >
> > >
> > > It's OK with me. Seems like they all
> > give us a
> > > discount!
> > > hint-hint :)
> > >
> > > Keith
> > >
> > >
> > > ----- Original Message -----
> > > From: David Withers
> > > <mailto:dr_ww@h...>
> > > To: 'AZ_VJC'
> > > <mailto:az_vjc@y...>
> > > Sent: Tuesday, February 19, 2002
> > 12:44
> > > PM
> > > Subject: [az_vjc] does seem like we
> > have
> > > a lot of vendors joining lately or
> > is it
> > > me?
> > >
> > > 4 wheelers
> > > tuff toys
> > > gloecco
> > > daystar
> > > just to name a few
> > >
> > > David R. W. Withers
> > > Desk: 480.551.4667
> > > Mobile: 480.215.6992
> > >
> > >
> > >
> > > Your use of Yahoo! Groups is
> > subject to
> > > the Yahoo! Terms of Service
> > > <http://docs.yahoo.com/info/terms/>
> > .
> > >
> > >
> > > Your use of Yahoo! Groups is subject to
> > the Yahoo!
> > > Terms of Service
> > > <http://docs.yahoo.com/info/terms/> .
> > >
> > > Your use of Yahoo! Groups is subject to the
> > Yahoo! Terms of
> > > Service <http://docs.yahoo.com/info/terms/> .
> > >
> > > Your use of Yahoo! Groups is subject to the Yahoo!
> > Terms of Service.
> >
>
>
> __________________________________________________
> Do You Yahoo!?
> Yahoo! Sports - Coverage of the 2002 Olympic Games
> http://sports.yahoo.com
43332 From: AzVJC Website <azvjc@a...>
Date: Wed Feb 20, 2002 10:32am
Subject: [FS] cj and yj parts, trans, engine,interior, etc.
Price: 5-500
Contact: 480 695 4737
I have a variety of cj and yj parts including engines, transmissions, interior, electrical, axels etc.
Jason Enyart
43333 From: wishmaaker <wishmaaker@y...>
Date: Wed Feb 20, 2002 10:34am
Subject: Re: does seem like we have a lot of vendors joininglately or is it me?
If it causes some type of disturbance then no its not okay. And
thats what it did, that would be my two cents!
--- In az_vjc@y..., Daryl Faust <louddog71@y...> wrote:
> So emails from stores posting jeep parts for sale are
> not OK for this forum.
> However it is OK to advertise rooms for rent or
> suggest that people not buy foriegn cars, or all the
> other non-jeep and/or useless emails that go through
> here?
>
> --- Mike & Karen Acuna <macunasprint@e...>
> wrote:
> > I agree, put a stop to this madness. They could
> > e-mail any info to
> > interested parties.
> > Mike
> >
> > Chris Krieg wrote:
> >
> > > OK. Jason and Ron at TuffToys are getting out of
> > hand. So far, they
> > > have posted 11 ads. I don't think it is
> > appropriate to post their
> > > entire used inventory on our site. A post saying
> > they have many parts
> > > and to call them might be OK, but he is using our
> > site to advertise
> > > everything he has. That pushes all the legit
> > member forsale posts to
> > > the bottom of the database.
> > >
> > > Chris
> > >
> > >
> > > From: Chris Krieg <rv6a@m...>
> > > Date: Tue, 19 Feb 2002 14:02:25 -0700
> > > To: Keith Haw <khaw@n...>, "'AZ_VJC'"
> > > <az_vjc@y...>, David Withers
> > <dr_ww@h...>
> > > Subject: Re: [az_vjc] does seem like we have
> > a lot of
> > > vendors joining lately or is it me?
> > >
> > >
> > > Yeah, as long as they are givng us a good
> > discount it might
> > > be OK as long as it doesn't get out of hand
> > and clog up the
> > > for sale database. If they are just using us
> > to advertise
> > > normal priced stuff, then send them packing.
> > >
> > > Chris K
> > >
> > >
> > > From: "Keith Haw" <khaw@n...>
> > > Date: Tue, 19 Feb 2002 12:52:51 -0700
> > > To: "'AZ_VJC'" <az_vjc@y...>,
> > "David
> > > Withers" <dr_ww@h...>
> > > Subject: Re: [az_vjc] does seem like we
> > have a lot
> > > of vendors joining lately or is it me?
> > >
> > >
> > > It's OK with me. Seems like they all
> > give us a
> > > discount!
> > > hint-hint :)
> > >
> > > Keith
> > >
> > >
> > > ----- Original Message -----
> > > From: David Withers
> > > <mailto:dr_ww@h...>
> > > To: 'AZ_VJC'
> > > <mailto:az_vjc@y...>
> > > Sent: Tuesday, February 19, 2002
> > 12:44
> > > PM
> > > Subject: [az_vjc] does seem like we
> > have
> > > a lot of vendors joining lately or
> > is it
> > > me?
> > >
> > > 4 wheelers
> > > tuff toys
> > > gloecco
> > > daystar
> > > just to name a few
> > >
> > > David R. W. Withers
> > > Desk: 480.551.4667
> > > Mobile: 480.215.6992
> > >
> > >
> > >
> > > Your use of Yahoo! Groups is
> > subject to
> > > the Yahoo! Terms of Service
> > > <http://docs.yahoo.com/info/terms/>
> > .
> > >
> > >
> > > Your use of Yahoo! Groups is subject to
> > the Yahoo!
> > > Terms of Service
> > > <http://docs.yahoo.com/info/terms/> .
> > >
> > > Your use of Yahoo! Groups is subject to the
> > Yahoo! Terms of
> > > Service <http://docs.yahoo.com/info/terms/> .
> > >
> > > Your use of Yahoo! Groups is subject to the Yahoo!
> > Terms of Service.
> >
>
>
> __________________________________________________
> Do You Yahoo!?
> Yahoo! Sports - Coverage of the 2002 Olympic Games
> http://sports.yahoo.com
43334 From: Beckham, Michael <Michael.Beckham@b...>
Date: Wed Feb 20, 2002 11:01am
Subject: RE: Re: does seem like we have a lot of vendors joiningl ately or is it me?
Just to make some more noise, let's not take ourselves too seriously, (we
might be mistaken for ARCA) If the intent is to help, who cares? If the
content doesn't interest you, don't read it. I myself am a rational
anarchist. If YOU need rules to keep yourslef out of trouble, OK, I'll look
at them, and if they don't restrict my freedom, I'll tolerate them. (read
ignore) But since I am a basically quiet guy, not looking for trouble, they
really don't affect me. Let's not over-react.......
-----Original Message-----
From: wishmaaker [mailto:wishmaaker@y...]
Sent: Wednesday, February 20, 2002 11:35 AM
To: az_vjc@yahoogroups.com
Subject: [az_vjc] Re: does seem like we have a lot of vendors
joininglately or is it me?
If it causes some type of disturbance then no its not okay. And
thats what it did, that would be my two cents!
--- In az_vjc@y..., Daryl Faust <louddog71@y...> wrote:
> So emails from stores posting jeep parts for sale are
> not OK for this forum.
> However it is OK to advertise rooms for rent or
> suggest that people not buy foriegn cars, or all the
> other non-jeep and/or useless emails that go through
> here?
>
> --- Mike & Karen Acuna <macunasprint@e...>
> wrote:
> > I agree, put a stop to this madness. They could
> > e-mail any info to
> > interested parties.
> > Mike
> >
> > Chris Krieg wrote:
> >
> > > OK. Jason and Ron at TuffToys are getting out of
> > hand. So far, they
> > > have posted 11 ads. I don't think it is
> > appropriate to post their
> > > entire used inventory on our site. A post saying
> > they have many parts
> > > and to call them might be OK, but he is using our
> > site to advertise
> > > everything he has. That pushes all the legit
> > member forsale posts to
> > > the bottom of the database.
> > >
> > > Chris
> > >
> > >
> > > From: Chris Krieg <rv6a@m...>
> > > Date: Tue, 19 Feb 2002 14:02:25 -0700
> > > To: Keith Haw <khaw@n...>, "'AZ_VJC'"
> > > <az_vjc@y...>, David Withers
> > <dr_ww@h...>
> > > Subject: Re: [az_vjc] does seem like we have
> > a lot of
> > > vendors joining lately or is it me?
> > >
> > >
> > > Yeah, as long as they are givng us a good
> > discount it might
> > > be OK as long as it doesn't get out of hand
> > and clog up the
> > > for sale database. If they are just using us
> > to advertise
> > > normal priced stuff, then send them packing.
> > >
> > > Chris K
> > >
> > >
> > > From: "Keith Haw" <khaw@n...>
> > > Date: Tue, 19 Feb 2002 12:52:51 -0700
> > > To: "'AZ_VJC'" <az_vjc@y...>,
> > "David
> > > Withers" <dr_ww@h...>
> > > Subject: Re: [az_vjc] does seem like we
> > have a lot
> > > of vendors joining lately or is it me?
> > >
> > >
> > > It's OK with me. Seems like they all
> > give us a
> > > discount!
> > > hint-hint :)
> > >
> > > Keith
> > >
> > >
> > > ----- Original Message -----
> > > From: David Withers
> > > <mailto:dr_ww@h...>
> > > To: 'AZ_VJC'
> > > <mailto:az_vjc@y...>
> > > Sent: Tuesday, February 19, 2002
> > 12:44
> > > PM
> > > Subject: [az_vjc] does seem like we
> > have
> > > a lot of vendors joining lately or
> > is it
> > > me?
> > >
> > > 4 wheelers
> > > tuff toys
> > > gloecco
> > > daystar
> > > just to name a few
> > >
> > > David R. W. Withers
> > > Desk: 480.551.4667
> > > Mobile: 480.215.6992
> > >
> > >
> > >
> > > Your use of Yahoo! Groups is
> > subject to
> > > the Yahoo! Terms of Service
> > > <http://docs.yahoo.com/info/terms/>
> > .
> > >
> > >
> > > Your use of Yahoo! Groups is subject to
> > the Yahoo!
> > > Terms of Service
> > > <http://docs.yahoo.com/info/terms/> .
> > >
> > > Your use of Yahoo! Groups is subject to the
> > Yahoo! Terms of
> > > Service <http://docs.yahoo.com/info/terms/> .
> > >
> > > Your use of Yahoo! Groups is subject to the Yahoo!
> > Terms of Service.
> >
>
>
> __________________________________________________
> Do You Yahoo!?
> Yahoo! Sports - Coverage of the 2002 Olympic Games
> http://sports.yahoo.com
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/