blooddrive
01-04-2004, 11:11 AM
43260-43284
43260 From: Siade, Randy <randy.siade@u...>
Date: Tue Feb 19, 2002 3:20pm
Subject: RE: Dana 300 service manual?
I just finished doing mine and the HD output shaft. My service manual is
very descriptive on how to over hall the D300. This is not a trivial task
and if you do not have to correct tools to do this you will have problems. I
will look at my service manual and let you know which one I have.
Did you also get a rebuild kit? The 4:1 kit does not come with new bearings.
You will need bearing pullers, grinder to grind on the case even though they
claim you do not need to you will to get the intermediate gear set in, dial
indicator and mag base.
-----Original Message-----
From: Chris Krieg [mailto:rv6a@m...]
Sent: Tuesday, February 19, 2002 3:54 PM
To: Virtual Jeep Club
Subject: [az_vjc] Dana 300 service manual?
OK all you CJ guys (and gals) out there. I just got my Teralow gearset and
the install instructions say:
"Please follow the Dana 300 rebuild instructions in the Jeep service manual"
Um, OK. Now where do I get a Dana 300 service manual or where can I find a
good CJ service manual that might have this info? All I have is the
Chilton's manual that I used when I had a CJ-5 but all it tells you how to
do is remove and replace the tcase and shows you a diagram of all the parts.
Thanks,
Chris K
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
--------------------------------------------------------------------------------
ADVERTISEMENT
43261 From: DesertJeep <joey@d...>
Date: Tue Feb 19, 2002 3:56pm
Subject: RE: Re: Vendor Adds
"What's to stop them from posting on the other ad section?"
That's where you come in James.
Joey K
93YJ
www.desertjeep.com
-----Original Message-----
From: jetowle2000 [mailto:James.Towle@a...]
Sent: Tuesday, February 19, 2002 4:06 PM
To: az_vjc@yahoogroups.com
Subject: [az_vjc] Re: Vendor Adds
Mike,
Thanks for the quick work. Once again I can't belive how fast you
come to action.
What's to stop them from posting on the other ad section?
--James
BTW - If anyone wants to contact the guy by eamil that is putting all
the ads on send it to: tuff_toys@h...
--- In az_vjc@y..., "az_jeeper_mike" <azvjc@a...> wrote:
> OK! Wow!
>
> Because of all the latest, I've added a catagory to the Classifieds
> section called "Vendors."
>
> Vendor advertisements will not be sent to the group e-mail, and
they
> will be listed on their own page so that they won't overrun
member's
> postings.
>
> Becuase these items won't be sent to the list, I added an e-mail
form
> vendors can use to let the list know when they have added some
> things. It will say something like:
>
> ---------------------
> Hello AzVJC,
> [Vendor Name] has added some items to the AzVJC website classifieds
> that may be of interest to you. To view these items, click here.
>
> - The AzVJC Website
> ---------------------
>
> To the vendors on the list I hope this is a fair arrangement for
> you. Feel free to post as many items as you wish, just make sure
to
> select "Vendors" from the drop down list. And remember all
> classifieds expire in 30 days so it is best that the classifieds be
> used to promote specials, limited time offers, sales, etc...
>
> Thanks,
>
> - Mike
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
43262 From: Chris Krieg <rv6a@m...>
Date: Tue Feb 19, 2002 3:00pm
Subject: Re: Re: Vendor Adds
Thanks Mike.
Chris K
> From: "az_jeeper_mike" <azvjc@a...>
> Date: Tue, 19 Feb 2002 22:42:21 -0000
> To: az_vjc@yahoogroups.com
> Subject: [az_vjc] Re: Vendor Adds
>
> OK! Wow!
>
> Because of all the latest, I've added a catagory to the Classifieds
> section called "Vendors."
>
> Vendor advertisements will not be sent to the group e-mail, and they
> will be listed on their own page so that they won't overrun member's
> postings.
>
> Becuase these items won't be sent to the list, I added an e-mail form
> vendors can use to let the list know when they have added some
> things. It will say something like:
>
> ---------------------
> Hello AzVJC,
> [Vendor Name] has added some items to the AzVJC website classifieds
> that may be of interest to you. To view these items, click here.
>
> - The AzVJC Website
> ---------------------
>
> To the vendors on the list I hope this is a fair arrangement for
> you. Feel free to post as many items as you wish, just make sure to
> select "Vendors" from the drop down list. And remember all
> classifieds expire in 30 days so it is best that the classifieds be
> used to promote specials, limited time offers, sales, etc...
>
> Thanks,
>
> - Mike
>
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
43263 From: Ross Skinner <rskinner@s...>
Date: Tue Feb 19, 2002 3:54pm
Subject: RE: Re: Vendor Adds
This is not a commercial list...I am very much agains't this habit. Many
people have already quit paying attention to this list because of the amount
of crap put on it..
I am starting to feel the same way..
Ross
-----Original Message-----
From: DesertJeep [mailto:joey@d...]
Sent: Tuesday, February 19, 2002 4:57 PM
To: jetowle2000; az_vjc@yahoogroups.com
Subject: RE: [az_vjc] Re: Vendor Adds
"What's to stop them from posting on the other ad section?"
That's where you come in James.
Joey K
93YJ
www.desertjeep.com
-----Original Message-----
From: jetowle2000 [mailto:James.Towle@a...]
Sent: Tuesday, February 19, 2002 4:06 PM
To: az_vjc@yahoogroups.com
Subject: [az_vjc] Re: Vendor Adds
Mike,
Thanks for the quick work. Once again I can't belive how fast you
come to action.
What's to stop them from posting on the other ad section?
--James
BTW - If anyone wants to contact the guy by eamil that is putting all
the ads on send it to: tuff_toys@h...
--- In az_vjc@y..., "az_jeeper_mike" <azvjc@a...> wrote:
> OK! Wow!
>
> Because of all the latest, I've added a catagory to the Classifieds
> section called "Vendors."
>
> Vendor advertisements will not be sent to the group e-mail, and
they
> will be listed on their own page so that they won't overrun
member's
> postings.
>
> Becuase these items won't be sent to the list, I added an e-mail
form
> vendors can use to let the list know when they have added some
> things. It will say something like:
>
> ---------------------
> Hello AzVJC,
> [Vendor Name] has added some items to the AzVJC website classifieds
> that may be of interest to you. To view these items, click here.
>
> - The AzVJC Website
> ---------------------
>
> To the vendors on the list I hope this is a fair arrangement for
> you. Feel free to post as many items as you wish, just make sure
to
> select "Vendors" from the drop down list. And remember all
> classifieds expire in 30 days so it is best that the classifieds be
> used to promote specials, limited time offers, sales, etc...
>
> Thanks,
>
> - Mike
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
43264 From: J & P Visic <jpvisic@n...>
Date: Tue Feb 19, 2002 4:14pm
Subject: Re: Dana 300 service manual?
Chris,
I have service manual M.R. 252 for CJ's and Scramblers. It has a 16-page
section on the D300 including removal, disassembly and assembly. I would be
happy to copy and fax or mail. Let me know.
John V.
Casa Grande
----- Original Message -----
From: "Chris Krieg" <rv6a@m...>
To: "Virtual Jeep Club" <az_vjc@yahoogroups.com>
Sent: Tuesday, February 19, 2002 3:54 PM
Subject: [az_vjc] Dana 300 service manual?
> OK all you CJ guys (and gals) out there. I just got my Teralow gearset and
> the install instructions say:
>
> "Please follow the Dana 300 rebuild instructions in the Jeep service
manual"
>
> Um, OK. Now where do I get a Dana 300 service manual or where can I find a
> good CJ service manual that might have this info? All I have is the
> Chilton's manual that I used when I had a CJ-5 but all it tells you how to
> do is remove and replace the tcase and shows you a diagram of all the
parts.
>
> Thanks,
>
> Chris K
>
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
43265 From: jetowle2000 <James.Towle@a...>
Date: Tue Feb 19, 2002 3:06pm
Subject: Re: Vendor Adds
Mike,
Thanks for the quick work. Once again I can't belive how fast you
come to action.
What's to stop them from posting on the other ad section?
--James
BTW - If anyone wants to contact the guy by eamil that is putting all
the ads on send it to: tuff_toys@h...
--- In az_vjc@y..., "az_jeeper_mike" <azvjc@a...> wrote:
> OK! Wow!
>
> Because of all the latest, I've added a catagory to the Classifieds
> section called "Vendors."
>
> Vendor advertisements will not be sent to the group e-mail, and
they
> will be listed on their own page so that they won't overrun
member's
> postings.
>
> Becuase these items won't be sent to the list, I added an e-mail
form
> vendors can use to let the list know when they have added some
> things. It will say something like:
>
> ---------------------
> Hello AzVJC,
> [Vendor Name] has added some items to the AzVJC website classifieds
> that may be of interest to you. To view these items, click here.
>
> - The AzVJC Website
> ---------------------
>
> To the vendors on the list I hope this is a fair arrangement for
> you. Feel free to post as many items as you wish, just make sure
to
> select "Vendors" from the drop down list. And remember all
> classifieds expire in 30 days so it is best that the classifieds be
> used to promote specials, limited time offers, sales, etc...
>
> Thanks,
>
> - Mike
43266 From: Clint Ramsey <cwramsey@t...>
Date: Tue Feb 19, 2002 4:02pm
Subject: truck trader
98 tj stock suspension with vjc sticker in the truck trader
Clint
43267 From: AzVJC Website <azvjc@a...>
Date: Tue Feb 19, 2002 4:47pm
Subject: [FS] D35 Lockright (c-clip)
Price: $200
Contact: 480-694-3983
Part #2311
Fits 1994 and up D35 with c-clip. Heard it will fit some XJs as well. Here's an application chart: http://www.powertrax.com/jeep1lr.pdf
Great condition, been in the jeep for about a year.
Dan Coley
43268 From: rlpeckii <rlpii@q...>
Date: Tue Feb 19, 2002 5:02pm
Subject: Wanted - Front Control Arms
A friend of mine is looking for:
Wanted: Used after-factory front control arms 16 1/2" to 16 7/8" for
an XJ, TJ, or ZJ. Please call Mike at 623-930-6649.
Tried to posted in the classifieds and couldn't get it to work?
So, if anyone has these for sale, please contact Mike.
TIA
Bob
74 CJ-5
43269 From: DougB <azjeep@c...>
Date: Tue Feb 19, 2002 5:16pm
Subject: Re: How long does the AZVJC sticker take to get to your house?
Awhoooo
----- Original Message -----
From: "Jayke Thorpe" <jeepboy_3@y...>
To: "Jesus Chio" <jchio@a...>; <az_vjc@yahoogroups.com>
Sent: Tuesday, February 19, 2002 10:39 AM
Subject: Re: [az_vjc] How long does the AZVJC sticker take to get to your
house?
> I am not trying to hound. I posted this as a general
> question.
> --- Jesus Chio <jchio@a...> wrote:
> > I think Jon is who sell the stickers, If I'm wrong
> > someone correct me
> > please.
> >
> > He does an awesome work and not only gets $0 out of
> > this but I'm sure he
> > ends up spending his own $ (time, gas, etc) on this
> > so cut him some slack.
> >
> > Email Jon at jonloveless@m... and ask him
> > directly
> >
> >
> >
> >
> > Jesus Chio
> > www.alloffroad.com
> >
> >
> ------------------------------------------------------------------
> > GOT .COM?
> > www.offroadhost.com
> >
> ------------------------------------------------------------------
> >
> >
> >
> >
> > ----- Original Message -----
> > From: "Jayke Thorpe" <jeepboy_3@y...>
> > To: <az_vjc@yahoogroups.com>
> > Sent: Monday, February 18, 2002 5:13 PM
> > Subject: [az_vjc] How long does the AZVJC sticker
> > take to get to your house?
> >
> >
> > > How long does the AZVJC sticker take to get to
> > your house?
> > >
> > > __________________________________________________
> > > Do You Yahoo!?
> > > Yahoo! Sports - Coverage of the 2002 Olympic Games
> > > http://sports.yahoo.com
> > >
> > >
> > >
> > > Your use of Yahoo! Groups is subject to
> > http://docs.yahoo.com/info/terms/
> > >
> > >
> >
>
>
>
> __________________________________________________
> Do You Yahoo!?
> Yahoo! Sports - Coverage of the 2002 Olympic Games
> http://sports.yahoo.com
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
43270 From: Chris Krieg <rv6a@m...>
Date: Tue Feb 19, 2002 5:30pm
Subject: Re: Dana 300 service manual?
Nope, I didn't get the rebuild kit. The tcase I have seems pretty good. Bad
idea?
Chris k
> From: "Siade, Randy" <randy.siade@u...>
> Date: Tue, 19 Feb 2002 17:20:58 -0600
> To: "'Chris Krieg'" <rv6a@m...>, Virtual Jeep Club <az_vjc@yahoogroups.com>
> Subject: RE: [az_vjc] Dana 300 service manual?
>
> I just finished doing mine and the HD output shaft. My service manual is
> very descriptive on how to over hall the D300. This is not a trivial task
> and if you do not have to correct tools to do this you will have problems. I
> will look at my service manual and let you know which one I have.
>
> Did you also get a rebuild kit? The 4:1 kit does not come with new bearings.
> You will need bearing pullers, grinder to grind on the case even though they
> claim you do not need to you will to get the intermediate gear set in, dial
> indicator and mag base.
>
> -----Original Message-----
> From: Chris Krieg [mailto:rv6a@m...]
> Sent: Tuesday, February 19, 2002 3:54 PM
> To: Virtual Jeep Club
> Subject: [az_vjc] Dana 300 service manual?
>
>
> OK all you CJ guys (and gals) out there. I just got my Teralow gearset and
> the install instructions say:
>
> "Please follow the Dana 300 rebuild instructions in the Jeep service manual"
>
> Um, OK. Now where do I get a Dana 300 service manual or where can I find a
> good CJ service manual that might have this info? All I have is the
> Chilton's manual that I used when I had a CJ-5 but all it tells you how to
> do is remove and replace the tcase and shows you a diagram of all the parts.
>
> Thanks,
>
> Chris K
>
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
43271 From: AzVJC Website <azvjc@a...>
Date: Tue Feb 19, 2002 5:37pm
Subject: [FS] Rear Fullsize DANA 60
Price: 350 OBO
Contact: bermboy@hotmail.com
This axle is out of a late 70's Ford F-250 It has 4.10 gears, open carrier, Full Floater with drum brakes. 8 LUG 66" WMS-WMS. Was going to use in my YJ but need the money to put my 8.8 in right now. E-mail for pics and details. I am in Chandler
Scott Maiden
Scott Maiden
43272 From: DougB <azjeep@c...>
Date: Tue Feb 19, 2002 5:36pm
Subject: Re: does seem like we have a lot of vendors joining lately or is it me?
I kinda look at it as an added benefit to the group. I've seen a number of 'for sale' items as well as discounts and stuff. So long as it's Jeep related, it's cool, IMO.
Doug
----- Original Message -----
From: DesertJeep
To: David Withers
Cc: 'AZ_VJC'
Sent: Tuesday, February 19, 2002 1:02 PM
Subject: RE: [az_vjc] does seem like we have a lot of vendors joining lately or is it me?
Ain't it cool.
There have always been quite a few vendors on with us. In lurk mode mostly. I have in the past posted about needing a part and a vendor responded with a great deal and I had it at my door step in a couple of days.
Joey K
93YJ
www.desertjeep.com
-----Original Message-----
From: David Withers [mailto:dr_ww@hotmail.com]
Sent: Tuesday, February 19, 2002 12:44 PM
To: 'AZ_VJC'
Subject: [az_vjc] does seem like we have a lot of vendors joining lately or is it me?
4 wheelers
tuff toys
gloecco
daystar
just to name a few
David R. W. Withers
Desk: 480.551.4667
Mobile: 480.215.6992
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
43273 From: highjeeps <highupjeep@q...>
Date: Tue Feb 19, 2002 5:50pm
Subject: Re: Easy trail for a beginer
There is a fairly easy and scenic trail up behind Jerome. You can get
to it by going up through Jerome towards Prescott. You turn off the
hiway about a half mile or so past the last house. It heads up the
hill towards the north and comes back on the north side of Jerome.
Larry
--- In az_vjc@y..., "Joe" <joseph@v...> wrote:
> Wanted to know if anyone knows of any trails near Cottonwood that
are fairly easy. I have a 78 CJ5 with 35's no lockers and stock
axles. joseph@v...
43274 From: Stu Olson <solson8@q...>
Date: Tue Feb 19, 2002 6:00pm
Subject: RE: Dana 300 service manual?
Chris,
Had you spent the extra $3.84 on your Tera 4:1, you would have gotten the
"Deluxe 300 Gear Set" which would have included instructions. :(
(sorry, but I haven't given you a bad time in weeks!)
Stu
Stu Olson
www.stu-offroad.com
-----Original Message-----
From: Chris Krieg [mailto:rv6a@m...]
Sent: Tuesday, February 19, 2002 3:54 PM
To: Virtual Jeep Club
Subject: [az_vjc] Dana 300 service manual?
OK all you CJ guys (and gals) out there. I just got my Teralow gearset and
the install instructions say:
"Please follow the Dana 300 rebuild instructions in the Jeep service manual"
Um, OK. Now where do I get a Dana 300 service manual or where can I find a
good CJ service manual that might have this info? All I have is the
Chilton's manual that I used when I had a CJ-5 but all it tells you how to
do is remove and replace the tcase and shows you a diagram of all the parts.
Thanks,
Chris K
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
43275 From: paparoach85251 <lespaparoach@m...>
Date: Tue Feb 19, 2002 6:08pm
Subject: Good deal on SYE
Just thought I would pass along a good deal to everyone in need of an
SYE. Right now you can get the JB Conversions SYE kit w/ HD output
shaft for $225 from www.offroadtoystore.com. It was a group buy put
together on JU but you order directly from the website. They also
have a deal going on Tom Woods custom driveshafts. Check out the JU
board for details or the offroadtoystore website.
I just ordered mine Sunday and expect it in this week.
Les
43276 From: <itsajeepthing28@a...>
Date: Tue Feb 19, 2002 1:10pm
Subject: Re: How long does the AZVJC sticker take to get to your house?
Dang ya'll... Chill out a bit...
by the way... Didn't get any e-mail from Jon L.
thanks for getting them in the mail!!!
43277 From: J & P Visic <jpvisic@n...>
Date: Tue Feb 19, 2002 6:23pm
Subject: Fw: [az_vgc] Re: Dana 300 service manual?
Chris
> I can fax the D300 portion to your wife's number in the morning. I'll
have
> to make copies at work. Once I've done that and have individual pages I
may
> be able to learn to use the new printer, fax, scanner, at home and email
you
> as well. (can't run the book through the type scanner I have).
>
> When I bought my CJ used the previous owner was going to buy a TJ (go
> figure), so he passed the manual on to me. Don't know it's original
source.
> I think it is a jeep shop manual because it tells you can't do anything
> without tool # J-XXXXX. It's very complete and seems to have everything
> you'd ever want to know, but can't understand what they are saying, in it.
> I'll be happy to share its contents with anyone who will benefit from it.
>
> Randy - If you read this and it's not the same manual as you have, let me
> know and I'll get a copy of the D300 section to you as well.
>
> John Visic
> ----- Original Message -----
> From: "Chris Krieg" <rv6a@m...>
> To: "J & P Visic" <jpvisic@i...>
> Sent: Tuesday, February 19, 2002 6:34 PM
> Subject: Re: [az_vjc] Dana 300 service manual?
>
>
> > BTW - where did you get this manual?
> >
> > Chris
> >
> > > From: "J & P Visic" <jpvisic@i...>
> > > Date: Tue, 19 Feb 2002 17:14:23 -0700
> > > To: "Virtual Jeep Club" <az_vjc@yahoogroups.com>, "Chris Krieg"
> <rv6a@m...>
> > > Subject: Re: [az_vjc] Dana 300 service manual?
> > >
> > > Chris,
> > >
> > > I have service manual M.R. 252 for CJ's and Scramblers. It has a
> 16-page
> > > section on the D300 including removal, disassembly and assembly. I
> would be
> > > happy to copy and fax or mail. Let me know.
> > >
> > > John V.
> > > Casa Grande
> > > ----- Original Message -----
> > > From: "Chris Krieg" <rv6a@m...>
> > > To: "Virtual Jeep Club" <az_vjc@yahoogroups.com>
> > > Sent: Tuesday, February 19, 2002 3:54 PM
> > > Subject: [az_vjc] Dana 300 service manual?
> > >
> > >
> > >> OK all you CJ guys (and gals) out there. I just got my Teralow
gearset
> and
> > >> the install instructions say:
> > >>
> > >> "Please follow the Dana 300 rebuild instructions in the Jeep service
> > > manual"
> > >>
> > >> Um, OK. Now where do I get a Dana 300 service manual or where can I
> find a
> > >> good CJ service manual that might have this info? All I have is the
> > >> Chilton's manual that I used when I had a CJ-5 but all it tells you
how
> to
> > >> do is remove and replace the tcase and shows you a diagram of all the
> > > parts.
> > >>
> > >> Thanks,
> > >>
> > >> Chris K
> > >>
> > >>
> > >>
> > >>
> > >> Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
> > >>
> > >>
> > >
> >
> >
>
>
>
> To unsubscribe from this group, send an email to:
> az_vgc-unsubscribe@yahoogroups.com
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
43278 From: steverino1112000 <steverino1112000@y...>
Date: Tue Feb 19, 2002 6:17pm
Subject: Re: Vendor Adds
Is the issue that these get sent to your inbox or that they get
posted to the site? I do not get anything forwarded to my inbox. I
saw an item that I was interested in and was glad it got posted. I
agree that a vendor site is more appropriate but I am glad to find
out about items for sale that I could use, that is partly why I log
on here.
Just my .02
Nick Smith
--- In az_vjc@y..., "Joe Kearney" <JoeKPhx@h...> wrote:
> OK Now I think this is just a little too much. I do not mind
getting info like "AZ_VJC'ers get 10% off at our site" but to send
out emails with all of their parts is too much.
>
> Thoughts?
>
> Joe Kearney
> Joe@J...
>
>
>
>
> ----- Original Message -----
> From: AzVJC Website
> To: AzVJC
> Sent: Tuesday, February 19, 2002 9:04 PM
> Subject: [az_vjc] [FS] New CARR light bar with 4 offroad lights
$120 480-695-4949
>
>
> Price: $120
>
> Contact: Ron at Tuff Toys 480-695-4949
>
>
>
> Jason Enyart
>
>
> Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service.
43279 From: Chris Krieg <rv6a@m...>
Date: Tue Feb 19, 2002 6:22pm
Subject: Re: Dana 300 service manual?
Doh! I knew I forgot something!
Chris
> From: "Stu Olson" <solson8@q...>
> Date: Tue, 19 Feb 2002 19:00:06 -0700
> To: "Chris Krieg" <rv6a@m...>, "Virtual Jeep Club" <az_vjc@yahoogroups.com>
> Subject: RE: [az_vjc] Dana 300 service manual?
>
> Chris,
>
> Had you spent the extra $3.84 on your Tera 4:1, you would have gotten the
> "Deluxe 300 Gear Set" which would have included instructions. :(
>
> (sorry, but I haven't given you a bad time in weeks!)
>
> Stu
>
>
> Stu Olson
> www.stu-offroad.com
>
>
> -----Original Message-----
> From: Chris Krieg [mailto:rv6a@m...]
> Sent: Tuesday, February 19, 2002 3:54 PM
> To: Virtual Jeep Club
> Subject: [az_vjc] Dana 300 service manual?
>
>
> OK all you CJ guys (and gals) out there. I just got my Teralow gearset and
> the install instructions say:
>
> "Please follow the Dana 300 rebuild instructions in the Jeep service manual"
>
> Um, OK. Now where do I get a Dana 300 service manual or where can I find a
> good CJ service manual that might have this info? All I have is the
> Chilton's manual that I used when I had a CJ-5 but all it tells you how to
> do is remove and replace the tcase and shows you a diagram of all the parts.
>
> Thanks,
>
> Chris K
>
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
43280 From: AzVJC Website <azvjc@a...>
Date: Tue Feb 19, 2002 6:28pm
Subject: [FS] 5 31x10.50 big foot xt tires and american racing wheels
Price: tires:450 rims:175
Contact: matt baker 623-975-6311
5 31x10.50 big o , big foot xt's
spare is brand new/ 750 brand new
4 american racing modular rims,
contact matt baker 623-975-6311
Matt Baker
43281 From: <hunteroffroad@a...>
Date: Tue Feb 19, 2002 2:27pm
Subject: [Wanted] Chevy axles
Club,
I am looking for Chevy half ton axles. Prefer Corp 12 bolt and Dana 44. Gears do not matter. Anybody have any laying around? I am looking to get them within the next month or sooner if it is a good deal. Will pay, or possibly trade out work.
Thank you for reading....
John Kanicsar
43282 From: hiett710 <hiett710@y...>
Date: Tue Feb 19, 2002 7:32pm
Subject: [MS] Red YJ? South on 303 detour just north of I-10
[MS] Red YJ? South on 303 detour just north of I-10
Arround 8 am today. *Wave* You probably saw me but I wasn't in a Jeep
I was in different type of High profile vehicle.
Mike H.
43283 From: Nick Gasmena <horizon@h...>
Date: Tue Feb 19, 2002 7:41pm
Subject: Re: Joe's addiction...
When is he gonna fab that harness to carry his jeep under the plane and drop it deep into the colorado mountains with a big parachute on the top?
Nick Gasmena - nickg@huskiesonline.com
-----------------------
Horizon Web Site - Http://www.HuskiesOnline.Com
My Jeep Pictures - http://www.azvjc.org/Gallery/View.asp?U=1637
My 4x4 Site - Http://www.huskiesonline.com/offroad
----- Original Message -----
From: Scott Kruize
To: AZ_VJC
Sent: Tuesday, February 19, 2002 8:49 AM
Subject: [az_vjc] Joe's addiction...
http://www.desertjeep.com/images/Friends/cessna.JPG
I guess he just couldn't leave well enough alone.
Hehe
Scott K
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
43284 From: bobandamanda2001 <dookie78@j...>
Date: Tue Feb 19, 2002 7:57pm
Subject: Mr. Ed
Anyone have any info on Mr. Ed? I haven't heard anything about him
lately. His website no longer exists either. What's the latest? Just
curious. TIA
Bob Kennedy
99 TJ
43260 From: Siade, Randy <randy.siade@u...>
Date: Tue Feb 19, 2002 3:20pm
Subject: RE: Dana 300 service manual?
I just finished doing mine and the HD output shaft. My service manual is
very descriptive on how to over hall the D300. This is not a trivial task
and if you do not have to correct tools to do this you will have problems. I
will look at my service manual and let you know which one I have.
Did you also get a rebuild kit? The 4:1 kit does not come with new bearings.
You will need bearing pullers, grinder to grind on the case even though they
claim you do not need to you will to get the intermediate gear set in, dial
indicator and mag base.
-----Original Message-----
From: Chris Krieg [mailto:rv6a@m...]
Sent: Tuesday, February 19, 2002 3:54 PM
To: Virtual Jeep Club
Subject: [az_vjc] Dana 300 service manual?
OK all you CJ guys (and gals) out there. I just got my Teralow gearset and
the install instructions say:
"Please follow the Dana 300 rebuild instructions in the Jeep service manual"
Um, OK. Now where do I get a Dana 300 service manual or where can I find a
good CJ service manual that might have this info? All I have is the
Chilton's manual that I used when I had a CJ-5 but all it tells you how to
do is remove and replace the tcase and shows you a diagram of all the parts.
Thanks,
Chris K
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
--------------------------------------------------------------------------------
ADVERTISEMENT
43261 From: DesertJeep <joey@d...>
Date: Tue Feb 19, 2002 3:56pm
Subject: RE: Re: Vendor Adds
"What's to stop them from posting on the other ad section?"
That's where you come in James.
Joey K
93YJ
www.desertjeep.com
-----Original Message-----
From: jetowle2000 [mailto:James.Towle@a...]
Sent: Tuesday, February 19, 2002 4:06 PM
To: az_vjc@yahoogroups.com
Subject: [az_vjc] Re: Vendor Adds
Mike,
Thanks for the quick work. Once again I can't belive how fast you
come to action.
What's to stop them from posting on the other ad section?
--James
BTW - If anyone wants to contact the guy by eamil that is putting all
the ads on send it to: tuff_toys@h...
--- In az_vjc@y..., "az_jeeper_mike" <azvjc@a...> wrote:
> OK! Wow!
>
> Because of all the latest, I've added a catagory to the Classifieds
> section called "Vendors."
>
> Vendor advertisements will not be sent to the group e-mail, and
they
> will be listed on their own page so that they won't overrun
member's
> postings.
>
> Becuase these items won't be sent to the list, I added an e-mail
form
> vendors can use to let the list know when they have added some
> things. It will say something like:
>
> ---------------------
> Hello AzVJC,
> [Vendor Name] has added some items to the AzVJC website classifieds
> that may be of interest to you. To view these items, click here.
>
> - The AzVJC Website
> ---------------------
>
> To the vendors on the list I hope this is a fair arrangement for
> you. Feel free to post as many items as you wish, just make sure
to
> select "Vendors" from the drop down list. And remember all
> classifieds expire in 30 days so it is best that the classifieds be
> used to promote specials, limited time offers, sales, etc...
>
> Thanks,
>
> - Mike
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
43262 From: Chris Krieg <rv6a@m...>
Date: Tue Feb 19, 2002 3:00pm
Subject: Re: Re: Vendor Adds
Thanks Mike.
Chris K
> From: "az_jeeper_mike" <azvjc@a...>
> Date: Tue, 19 Feb 2002 22:42:21 -0000
> To: az_vjc@yahoogroups.com
> Subject: [az_vjc] Re: Vendor Adds
>
> OK! Wow!
>
> Because of all the latest, I've added a catagory to the Classifieds
> section called "Vendors."
>
> Vendor advertisements will not be sent to the group e-mail, and they
> will be listed on their own page so that they won't overrun member's
> postings.
>
> Becuase these items won't be sent to the list, I added an e-mail form
> vendors can use to let the list know when they have added some
> things. It will say something like:
>
> ---------------------
> Hello AzVJC,
> [Vendor Name] has added some items to the AzVJC website classifieds
> that may be of interest to you. To view these items, click here.
>
> - The AzVJC Website
> ---------------------
>
> To the vendors on the list I hope this is a fair arrangement for
> you. Feel free to post as many items as you wish, just make sure to
> select "Vendors" from the drop down list. And remember all
> classifieds expire in 30 days so it is best that the classifieds be
> used to promote specials, limited time offers, sales, etc...
>
> Thanks,
>
> - Mike
>
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
43263 From: Ross Skinner <rskinner@s...>
Date: Tue Feb 19, 2002 3:54pm
Subject: RE: Re: Vendor Adds
This is not a commercial list...I am very much agains't this habit. Many
people have already quit paying attention to this list because of the amount
of crap put on it..
I am starting to feel the same way..
Ross
-----Original Message-----
From: DesertJeep [mailto:joey@d...]
Sent: Tuesday, February 19, 2002 4:57 PM
To: jetowle2000; az_vjc@yahoogroups.com
Subject: RE: [az_vjc] Re: Vendor Adds
"What's to stop them from posting on the other ad section?"
That's where you come in James.
Joey K
93YJ
www.desertjeep.com
-----Original Message-----
From: jetowle2000 [mailto:James.Towle@a...]
Sent: Tuesday, February 19, 2002 4:06 PM
To: az_vjc@yahoogroups.com
Subject: [az_vjc] Re: Vendor Adds
Mike,
Thanks for the quick work. Once again I can't belive how fast you
come to action.
What's to stop them from posting on the other ad section?
--James
BTW - If anyone wants to contact the guy by eamil that is putting all
the ads on send it to: tuff_toys@h...
--- In az_vjc@y..., "az_jeeper_mike" <azvjc@a...> wrote:
> OK! Wow!
>
> Because of all the latest, I've added a catagory to the Classifieds
> section called "Vendors."
>
> Vendor advertisements will not be sent to the group e-mail, and
they
> will be listed on their own page so that they won't overrun
member's
> postings.
>
> Becuase these items won't be sent to the list, I added an e-mail
form
> vendors can use to let the list know when they have added some
> things. It will say something like:
>
> ---------------------
> Hello AzVJC,
> [Vendor Name] has added some items to the AzVJC website classifieds
> that may be of interest to you. To view these items, click here.
>
> - The AzVJC Website
> ---------------------
>
> To the vendors on the list I hope this is a fair arrangement for
> you. Feel free to post as many items as you wish, just make sure
to
> select "Vendors" from the drop down list. And remember all
> classifieds expire in 30 days so it is best that the classifieds be
> used to promote specials, limited time offers, sales, etc...
>
> Thanks,
>
> - Mike
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
43264 From: J & P Visic <jpvisic@n...>
Date: Tue Feb 19, 2002 4:14pm
Subject: Re: Dana 300 service manual?
Chris,
I have service manual M.R. 252 for CJ's and Scramblers. It has a 16-page
section on the D300 including removal, disassembly and assembly. I would be
happy to copy and fax or mail. Let me know.
John V.
Casa Grande
----- Original Message -----
From: "Chris Krieg" <rv6a@m...>
To: "Virtual Jeep Club" <az_vjc@yahoogroups.com>
Sent: Tuesday, February 19, 2002 3:54 PM
Subject: [az_vjc] Dana 300 service manual?
> OK all you CJ guys (and gals) out there. I just got my Teralow gearset and
> the install instructions say:
>
> "Please follow the Dana 300 rebuild instructions in the Jeep service
manual"
>
> Um, OK. Now where do I get a Dana 300 service manual or where can I find a
> good CJ service manual that might have this info? All I have is the
> Chilton's manual that I used when I had a CJ-5 but all it tells you how to
> do is remove and replace the tcase and shows you a diagram of all the
parts.
>
> Thanks,
>
> Chris K
>
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
43265 From: jetowle2000 <James.Towle@a...>
Date: Tue Feb 19, 2002 3:06pm
Subject: Re: Vendor Adds
Mike,
Thanks for the quick work. Once again I can't belive how fast you
come to action.
What's to stop them from posting on the other ad section?
--James
BTW - If anyone wants to contact the guy by eamil that is putting all
the ads on send it to: tuff_toys@h...
--- In az_vjc@y..., "az_jeeper_mike" <azvjc@a...> wrote:
> OK! Wow!
>
> Because of all the latest, I've added a catagory to the Classifieds
> section called "Vendors."
>
> Vendor advertisements will not be sent to the group e-mail, and
they
> will be listed on their own page so that they won't overrun
member's
> postings.
>
> Becuase these items won't be sent to the list, I added an e-mail
form
> vendors can use to let the list know when they have added some
> things. It will say something like:
>
> ---------------------
> Hello AzVJC,
> [Vendor Name] has added some items to the AzVJC website classifieds
> that may be of interest to you. To view these items, click here.
>
> - The AzVJC Website
> ---------------------
>
> To the vendors on the list I hope this is a fair arrangement for
> you. Feel free to post as many items as you wish, just make sure
to
> select "Vendors" from the drop down list. And remember all
> classifieds expire in 30 days so it is best that the classifieds be
> used to promote specials, limited time offers, sales, etc...
>
> Thanks,
>
> - Mike
43266 From: Clint Ramsey <cwramsey@t...>
Date: Tue Feb 19, 2002 4:02pm
Subject: truck trader
98 tj stock suspension with vjc sticker in the truck trader
Clint
43267 From: AzVJC Website <azvjc@a...>
Date: Tue Feb 19, 2002 4:47pm
Subject: [FS] D35 Lockright (c-clip)
Price: $200
Contact: 480-694-3983
Part #2311
Fits 1994 and up D35 with c-clip. Heard it will fit some XJs as well. Here's an application chart: http://www.powertrax.com/jeep1lr.pdf
Great condition, been in the jeep for about a year.
Dan Coley
43268 From: rlpeckii <rlpii@q...>
Date: Tue Feb 19, 2002 5:02pm
Subject: Wanted - Front Control Arms
A friend of mine is looking for:
Wanted: Used after-factory front control arms 16 1/2" to 16 7/8" for
an XJ, TJ, or ZJ. Please call Mike at 623-930-6649.
Tried to posted in the classifieds and couldn't get it to work?
So, if anyone has these for sale, please contact Mike.
TIA
Bob
74 CJ-5
43269 From: DougB <azjeep@c...>
Date: Tue Feb 19, 2002 5:16pm
Subject: Re: How long does the AZVJC sticker take to get to your house?
Awhoooo
----- Original Message -----
From: "Jayke Thorpe" <jeepboy_3@y...>
To: "Jesus Chio" <jchio@a...>; <az_vjc@yahoogroups.com>
Sent: Tuesday, February 19, 2002 10:39 AM
Subject: Re: [az_vjc] How long does the AZVJC sticker take to get to your
house?
> I am not trying to hound. I posted this as a general
> question.
> --- Jesus Chio <jchio@a...> wrote:
> > I think Jon is who sell the stickers, If I'm wrong
> > someone correct me
> > please.
> >
> > He does an awesome work and not only gets $0 out of
> > this but I'm sure he
> > ends up spending his own $ (time, gas, etc) on this
> > so cut him some slack.
> >
> > Email Jon at jonloveless@m... and ask him
> > directly
> >
> >
> >
> >
> > Jesus Chio
> > www.alloffroad.com
> >
> >
> ------------------------------------------------------------------
> > GOT .COM?
> > www.offroadhost.com
> >
> ------------------------------------------------------------------
> >
> >
> >
> >
> > ----- Original Message -----
> > From: "Jayke Thorpe" <jeepboy_3@y...>
> > To: <az_vjc@yahoogroups.com>
> > Sent: Monday, February 18, 2002 5:13 PM
> > Subject: [az_vjc] How long does the AZVJC sticker
> > take to get to your house?
> >
> >
> > > How long does the AZVJC sticker take to get to
> > your house?
> > >
> > > __________________________________________________
> > > Do You Yahoo!?
> > > Yahoo! Sports - Coverage of the 2002 Olympic Games
> > > http://sports.yahoo.com
> > >
> > >
> > >
> > > Your use of Yahoo! Groups is subject to
> > http://docs.yahoo.com/info/terms/
> > >
> > >
> >
>
>
>
> __________________________________________________
> Do You Yahoo!?
> Yahoo! Sports - Coverage of the 2002 Olympic Games
> http://sports.yahoo.com
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
43270 From: Chris Krieg <rv6a@m...>
Date: Tue Feb 19, 2002 5:30pm
Subject: Re: Dana 300 service manual?
Nope, I didn't get the rebuild kit. The tcase I have seems pretty good. Bad
idea?
Chris k
> From: "Siade, Randy" <randy.siade@u...>
> Date: Tue, 19 Feb 2002 17:20:58 -0600
> To: "'Chris Krieg'" <rv6a@m...>, Virtual Jeep Club <az_vjc@yahoogroups.com>
> Subject: RE: [az_vjc] Dana 300 service manual?
>
> I just finished doing mine and the HD output shaft. My service manual is
> very descriptive on how to over hall the D300. This is not a trivial task
> and if you do not have to correct tools to do this you will have problems. I
> will look at my service manual and let you know which one I have.
>
> Did you also get a rebuild kit? The 4:1 kit does not come with new bearings.
> You will need bearing pullers, grinder to grind on the case even though they
> claim you do not need to you will to get the intermediate gear set in, dial
> indicator and mag base.
>
> -----Original Message-----
> From: Chris Krieg [mailto:rv6a@m...]
> Sent: Tuesday, February 19, 2002 3:54 PM
> To: Virtual Jeep Club
> Subject: [az_vjc] Dana 300 service manual?
>
>
> OK all you CJ guys (and gals) out there. I just got my Teralow gearset and
> the install instructions say:
>
> "Please follow the Dana 300 rebuild instructions in the Jeep service manual"
>
> Um, OK. Now where do I get a Dana 300 service manual or where can I find a
> good CJ service manual that might have this info? All I have is the
> Chilton's manual that I used when I had a CJ-5 but all it tells you how to
> do is remove and replace the tcase and shows you a diagram of all the parts.
>
> Thanks,
>
> Chris K
>
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
43271 From: AzVJC Website <azvjc@a...>
Date: Tue Feb 19, 2002 5:37pm
Subject: [FS] Rear Fullsize DANA 60
Price: 350 OBO
Contact: bermboy@hotmail.com
This axle is out of a late 70's Ford F-250 It has 4.10 gears, open carrier, Full Floater with drum brakes. 8 LUG 66" WMS-WMS. Was going to use in my YJ but need the money to put my 8.8 in right now. E-mail for pics and details. I am in Chandler
Scott Maiden
Scott Maiden
43272 From: DougB <azjeep@c...>
Date: Tue Feb 19, 2002 5:36pm
Subject: Re: does seem like we have a lot of vendors joining lately or is it me?
I kinda look at it as an added benefit to the group. I've seen a number of 'for sale' items as well as discounts and stuff. So long as it's Jeep related, it's cool, IMO.
Doug
----- Original Message -----
From: DesertJeep
To: David Withers
Cc: 'AZ_VJC'
Sent: Tuesday, February 19, 2002 1:02 PM
Subject: RE: [az_vjc] does seem like we have a lot of vendors joining lately or is it me?
Ain't it cool.
There have always been quite a few vendors on with us. In lurk mode mostly. I have in the past posted about needing a part and a vendor responded with a great deal and I had it at my door step in a couple of days.
Joey K
93YJ
www.desertjeep.com
-----Original Message-----
From: David Withers [mailto:dr_ww@hotmail.com]
Sent: Tuesday, February 19, 2002 12:44 PM
To: 'AZ_VJC'
Subject: [az_vjc] does seem like we have a lot of vendors joining lately or is it me?
4 wheelers
tuff toys
gloecco
daystar
just to name a few
David R. W. Withers
Desk: 480.551.4667
Mobile: 480.215.6992
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
43273 From: highjeeps <highupjeep@q...>
Date: Tue Feb 19, 2002 5:50pm
Subject: Re: Easy trail for a beginer
There is a fairly easy and scenic trail up behind Jerome. You can get
to it by going up through Jerome towards Prescott. You turn off the
hiway about a half mile or so past the last house. It heads up the
hill towards the north and comes back on the north side of Jerome.
Larry
--- In az_vjc@y..., "Joe" <joseph@v...> wrote:
> Wanted to know if anyone knows of any trails near Cottonwood that
are fairly easy. I have a 78 CJ5 with 35's no lockers and stock
axles. joseph@v...
43274 From: Stu Olson <solson8@q...>
Date: Tue Feb 19, 2002 6:00pm
Subject: RE: Dana 300 service manual?
Chris,
Had you spent the extra $3.84 on your Tera 4:1, you would have gotten the
"Deluxe 300 Gear Set" which would have included instructions. :(
(sorry, but I haven't given you a bad time in weeks!)
Stu
Stu Olson
www.stu-offroad.com
-----Original Message-----
From: Chris Krieg [mailto:rv6a@m...]
Sent: Tuesday, February 19, 2002 3:54 PM
To: Virtual Jeep Club
Subject: [az_vjc] Dana 300 service manual?
OK all you CJ guys (and gals) out there. I just got my Teralow gearset and
the install instructions say:
"Please follow the Dana 300 rebuild instructions in the Jeep service manual"
Um, OK. Now where do I get a Dana 300 service manual or where can I find a
good CJ service manual that might have this info? All I have is the
Chilton's manual that I used when I had a CJ-5 but all it tells you how to
do is remove and replace the tcase and shows you a diagram of all the parts.
Thanks,
Chris K
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
43275 From: paparoach85251 <lespaparoach@m...>
Date: Tue Feb 19, 2002 6:08pm
Subject: Good deal on SYE
Just thought I would pass along a good deal to everyone in need of an
SYE. Right now you can get the JB Conversions SYE kit w/ HD output
shaft for $225 from www.offroadtoystore.com. It was a group buy put
together on JU but you order directly from the website. They also
have a deal going on Tom Woods custom driveshafts. Check out the JU
board for details or the offroadtoystore website.
I just ordered mine Sunday and expect it in this week.
Les
43276 From: <itsajeepthing28@a...>
Date: Tue Feb 19, 2002 1:10pm
Subject: Re: How long does the AZVJC sticker take to get to your house?
Dang ya'll... Chill out a bit...
by the way... Didn't get any e-mail from Jon L.
thanks for getting them in the mail!!!
43277 From: J & P Visic <jpvisic@n...>
Date: Tue Feb 19, 2002 6:23pm
Subject: Fw: [az_vgc] Re: Dana 300 service manual?
Chris
> I can fax the D300 portion to your wife's number in the morning. I'll
have
> to make copies at work. Once I've done that and have individual pages I
may
> be able to learn to use the new printer, fax, scanner, at home and email
you
> as well. (can't run the book through the type scanner I have).
>
> When I bought my CJ used the previous owner was going to buy a TJ (go
> figure), so he passed the manual on to me. Don't know it's original
source.
> I think it is a jeep shop manual because it tells you can't do anything
> without tool # J-XXXXX. It's very complete and seems to have everything
> you'd ever want to know, but can't understand what they are saying, in it.
> I'll be happy to share its contents with anyone who will benefit from it.
>
> Randy - If you read this and it's not the same manual as you have, let me
> know and I'll get a copy of the D300 section to you as well.
>
> John Visic
> ----- Original Message -----
> From: "Chris Krieg" <rv6a@m...>
> To: "J & P Visic" <jpvisic@i...>
> Sent: Tuesday, February 19, 2002 6:34 PM
> Subject: Re: [az_vjc] Dana 300 service manual?
>
>
> > BTW - where did you get this manual?
> >
> > Chris
> >
> > > From: "J & P Visic" <jpvisic@i...>
> > > Date: Tue, 19 Feb 2002 17:14:23 -0700
> > > To: "Virtual Jeep Club" <az_vjc@yahoogroups.com>, "Chris Krieg"
> <rv6a@m...>
> > > Subject: Re: [az_vjc] Dana 300 service manual?
> > >
> > > Chris,
> > >
> > > I have service manual M.R. 252 for CJ's and Scramblers. It has a
> 16-page
> > > section on the D300 including removal, disassembly and assembly. I
> would be
> > > happy to copy and fax or mail. Let me know.
> > >
> > > John V.
> > > Casa Grande
> > > ----- Original Message -----
> > > From: "Chris Krieg" <rv6a@m...>
> > > To: "Virtual Jeep Club" <az_vjc@yahoogroups.com>
> > > Sent: Tuesday, February 19, 2002 3:54 PM
> > > Subject: [az_vjc] Dana 300 service manual?
> > >
> > >
> > >> OK all you CJ guys (and gals) out there. I just got my Teralow
gearset
> and
> > >> the install instructions say:
> > >>
> > >> "Please follow the Dana 300 rebuild instructions in the Jeep service
> > > manual"
> > >>
> > >> Um, OK. Now where do I get a Dana 300 service manual or where can I
> find a
> > >> good CJ service manual that might have this info? All I have is the
> > >> Chilton's manual that I used when I had a CJ-5 but all it tells you
how
> to
> > >> do is remove and replace the tcase and shows you a diagram of all the
> > > parts.
> > >>
> > >> Thanks,
> > >>
> > >> Chris K
> > >>
> > >>
> > >>
> > >>
> > >> Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
> > >>
> > >>
> > >
> >
> >
>
>
>
> To unsubscribe from this group, send an email to:
> az_vgc-unsubscribe@yahoogroups.com
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
43278 From: steverino1112000 <steverino1112000@y...>
Date: Tue Feb 19, 2002 6:17pm
Subject: Re: Vendor Adds
Is the issue that these get sent to your inbox or that they get
posted to the site? I do not get anything forwarded to my inbox. I
saw an item that I was interested in and was glad it got posted. I
agree that a vendor site is more appropriate but I am glad to find
out about items for sale that I could use, that is partly why I log
on here.
Just my .02
Nick Smith
--- In az_vjc@y..., "Joe Kearney" <JoeKPhx@h...> wrote:
> OK Now I think this is just a little too much. I do not mind
getting info like "AZ_VJC'ers get 10% off at our site" but to send
out emails with all of their parts is too much.
>
> Thoughts?
>
> Joe Kearney
> Joe@J...
>
>
>
>
> ----- Original Message -----
> From: AzVJC Website
> To: AzVJC
> Sent: Tuesday, February 19, 2002 9:04 PM
> Subject: [az_vjc] [FS] New CARR light bar with 4 offroad lights
$120 480-695-4949
>
>
> Price: $120
>
> Contact: Ron at Tuff Toys 480-695-4949
>
>
>
> Jason Enyart
>
>
> Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service.
43279 From: Chris Krieg <rv6a@m...>
Date: Tue Feb 19, 2002 6:22pm
Subject: Re: Dana 300 service manual?
Doh! I knew I forgot something!
Chris
> From: "Stu Olson" <solson8@q...>
> Date: Tue, 19 Feb 2002 19:00:06 -0700
> To: "Chris Krieg" <rv6a@m...>, "Virtual Jeep Club" <az_vjc@yahoogroups.com>
> Subject: RE: [az_vjc] Dana 300 service manual?
>
> Chris,
>
> Had you spent the extra $3.84 on your Tera 4:1, you would have gotten the
> "Deluxe 300 Gear Set" which would have included instructions. :(
>
> (sorry, but I haven't given you a bad time in weeks!)
>
> Stu
>
>
> Stu Olson
> www.stu-offroad.com
>
>
> -----Original Message-----
> From: Chris Krieg [mailto:rv6a@m...]
> Sent: Tuesday, February 19, 2002 3:54 PM
> To: Virtual Jeep Club
> Subject: [az_vjc] Dana 300 service manual?
>
>
> OK all you CJ guys (and gals) out there. I just got my Teralow gearset and
> the install instructions say:
>
> "Please follow the Dana 300 rebuild instructions in the Jeep service manual"
>
> Um, OK. Now where do I get a Dana 300 service manual or where can I find a
> good CJ service manual that might have this info? All I have is the
> Chilton's manual that I used when I had a CJ-5 but all it tells you how to
> do is remove and replace the tcase and shows you a diagram of all the parts.
>
> Thanks,
>
> Chris K
>
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
43280 From: AzVJC Website <azvjc@a...>
Date: Tue Feb 19, 2002 6:28pm
Subject: [FS] 5 31x10.50 big foot xt tires and american racing wheels
Price: tires:450 rims:175
Contact: matt baker 623-975-6311
5 31x10.50 big o , big foot xt's
spare is brand new/ 750 brand new
4 american racing modular rims,
contact matt baker 623-975-6311
Matt Baker
43281 From: <hunteroffroad@a...>
Date: Tue Feb 19, 2002 2:27pm
Subject: [Wanted] Chevy axles
Club,
I am looking for Chevy half ton axles. Prefer Corp 12 bolt and Dana 44. Gears do not matter. Anybody have any laying around? I am looking to get them within the next month or sooner if it is a good deal. Will pay, or possibly trade out work.
Thank you for reading....
John Kanicsar
43282 From: hiett710 <hiett710@y...>
Date: Tue Feb 19, 2002 7:32pm
Subject: [MS] Red YJ? South on 303 detour just north of I-10
[MS] Red YJ? South on 303 detour just north of I-10
Arround 8 am today. *Wave* You probably saw me but I wasn't in a Jeep
I was in different type of High profile vehicle.
Mike H.
43283 From: Nick Gasmena <horizon@h...>
Date: Tue Feb 19, 2002 7:41pm
Subject: Re: Joe's addiction...
When is he gonna fab that harness to carry his jeep under the plane and drop it deep into the colorado mountains with a big parachute on the top?
Nick Gasmena - nickg@huskiesonline.com
-----------------------
Horizon Web Site - Http://www.HuskiesOnline.Com
My Jeep Pictures - http://www.azvjc.org/Gallery/View.asp?U=1637
My 4x4 Site - Http://www.huskiesonline.com/offroad
----- Original Message -----
From: Scott Kruize
To: AZ_VJC
Sent: Tuesday, February 19, 2002 8:49 AM
Subject: [az_vjc] Joe's addiction...
http://www.desertjeep.com/images/Friends/cessna.JPG
I guess he just couldn't leave well enough alone.
Hehe
Scott K
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
43284 From: bobandamanda2001 <dookie78@j...>
Date: Tue Feb 19, 2002 7:57pm
Subject: Mr. Ed
Anyone have any info on Mr. Ed? I haven't heard anything about him
lately. His website no longer exists either. What's the latest? Just
curious. TIA
Bob Kennedy
99 TJ