blooddrive
01-04-2004, 11:11 AM
43235-43259
43235 From: David R. W. Withers <dr_ww@h...>
Date: Tue Feb 19, 2002 1:20pm
Subject: RE: Vendor Adds
he could list everything in one add, that would be fine with me
David
-----Original Message-----
From: Scott Thomas [mailto:sthomas@architekton.com]
Sent: Tuesday, February 19, 2002 2:15 PM
To: Joe Kearney; AzVJC
Subject: RE: [az_vjc] Vendor Adds
I have to agree with you Joe. Or every once in a while send an e-mail out saying that this is on sale for this time and AZVJC members get it at this price. But this is a lot that they are sending now.
Just my two cents.
Scott Thomas
97' Tj
-----Original Message-----
From: Joe Kearney [mailto:JoeKPhx@hotmail.com]
Sent: Tuesday, February 19, 2002 2:08 PM
To: AzVJC
Subject: [az_vjc] Vendor Adds
OK Now I think this is just a little too much. I do not mind getting info like "AZ_VJC'ers get 10% off at our site" but to send out emails with all of their parts is too much.
Thoughts?
Joe Kearney
Joe@JRKearney.com
----- Original Message -----
From: AzVJC Website
To: AzVJC
Sent: Tuesday, February 19, 2002 9:04 PM
Subject: [az_vjc] [FS] New CARR light bar with 4 offroad lights $120 480-695-4949
Price: $120
Contact: Ron at Tuff Toys 480-695-4949
Jason Enyart
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
--------------------------------------------------------------------------------
ADVERTISEMENT
43236 From: Chris Krieg <rv6a@m...>
Date: Tue Feb 19, 2002 1:17pm
Subject: Re: Vendor Adds
OK. I gave TuffToys a call and suggested they put together one post with all the things they have and prices. Then mail that one list to the group instead of the multiple entries they had. They were very responsive on the phone.
Chris K
From: "Joe Kearney"
Date: Tue, 19 Feb 2002 14:07:45 -0700
To: "AzVJC"
Subject: [az_vjc] Vendor Adds
OK Now I think this is just a little too much. I do not mind getting info like "AZ_VJC'ers get 10% off at our site" but to send out emails with all of their parts is too much.
Thoughts?
Joe Kearney
Joe@JRKearney.com
----- Original Message -----
From: AzVJC Website
To: AzVJC
Sent: Tuesday, February 19, 2002 9:04 PM
Subject: [az_vjc] [FS] New CARR light bar with 4 offroad lights $120 480-695-4949
Price: $120
Contact: Ron at Tuff Toys 480-695-4949
Jason Enyart
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service .
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service .
43237 From: AzVJC Website <azvjc@a...>
Date: Tue Feb 19, 2002 1:22pm
Subject: [FS] Wanted - AMC20 Locker
Price: You tell me
Contact: Clyde McKay
Please email me at clyde@mckaylink.com
43238 From: <SIMONLUKER@A...>
Date: Tue Feb 19, 2002 8:23am
Subject: (no subject)
ONE AD WOULD BE COOL, BUT IT LOOKS LIKE THEY HAVE SOME GOOD ITEMS. HEY AT
LEAST THEY ARE TRYING. LETS MOVE ON!
43239 From: kmichael02 <kmichael02@y...>
Date: Tue Feb 19, 2002 1:37pm
Subject: ------------LAP BELTS---------
Any one have lap belts they want to get rid of???
thanks mike
43240 From: Halverson <byrnec@q...>
Date: Tue Feb 19, 2002 1:56pm
Subject: Re: [FS] 700R4 built to the hilt corvette servos all the best of the best 480-695-4949
Just call us the Arizona Virtual Tuff Toys Advertising Club------geez what is this?
John
----- Original Message -----
From: AzVJC Website
To: AzVJC
Sent: Tuesday, February 19, 2002 7:47 PM
Subject: [az_vjc] [FS] 700R4 built to the hilt corvette servos all the best of the best 480-695-4949
Price: $900
Contact: Ron at Tuff Toys 480-695-4949
Jason Enyart
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
43241 From: Mike & Karen Acuna <macunasprint@e...>
Date: Tue Feb 19, 2002 2:16pm
Subject: Re: does seem like we have a lot of vendors joininglately or is it me?
I agree, put a stop to this madness. They could e-mail any info to interested parties.
Mike
Chris Krieg wrote:
OK. Jason and Ron at TuffToys are getting out of hand. So far, they have posted 11 ads. I don't think it is appropriate to post their entire used inventory on our site. A post saying they have many parts and to call them might be OK, but he is using our site to advertise everything he has. That pushes all the legit member forsale posts to the bottom of the database.
Chris
From: Chris Krieg
Date: Tue, 19 Feb 2002 14:02:25 -0700
To: Keith Haw , "'AZ_VJC'" , David Withers
Subject: Re: [az_vjc] does seem like we have a lot of vendors joining lately or is it me?
Yeah, as long as they are givng us a good discount it might be OK as long as it doesn't get out of hand and clog up the for sale database. If they are just using us to advertise normal priced stuff, then send them packing.
Chris K
From: "Keith Haw"
Date: Tue, 19 Feb 2002 12:52:51 -0700
To: "'AZ_VJC'" , "David Withers"
Subject: Re: [az_vjc] does seem like we have a lot of vendors joining lately or is it me?
It's OK with me. Seems like they all give us a discount!
hint-hint :)
Keith
----- Original Message -----
From: David Withers <mailto:dr_ww@hotmail.com>
To: 'AZ_VJC' <mailto:az_vjc@yahoogroups.com>
Sent: Tuesday, February 19, 2002 12:44 PM
Subject: [az_vjc] does seem like we have a lot of vendors joining lately or is it me?
4 wheelers
tuff toys
gloecco
daystar
just to name a few
David R. W. Withers
Desk: 480.551.4667
Mobile: 480.215.6992
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service <http://docs.yahoo.com/info/terms/> .
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service <http://docs.yahoo.com/info/terms/> .
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service <http://docs.yahoo.com/info/terms/> .
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
43242 From: wishmaaker <wishmaaker@y...>
Date: Tue Feb 19, 2002 11:51am
Subject: replacing rear seat with...
I didn't get much of a return on my post earlier about moving my rear
seat back to get a little more leg room, which is okay, because I
have a new idea, I am thinking about purchasing some front TJ seats
and mounting them in the back, I know I will have to come up with
some sort or bracket to mount the seats in the rear, anyone out there
with welding skills and equipment that would be willing to lend their
services in assisting me with this project? Or just ideas on ways to
mount/build the bracket would be much appreciated. Tell me what you
think!
TIA
43243 From: wishmaaker <wishmaaker@y...>
Date: Tue Feb 19, 2002 6:46am
Subject: Re: Can some one try my website links,,, Jack handle pics also
bash$ telnet 68.3.165.149 80
Trying 68.3.165.149...
telnet: connect to address 68.3.165.149: Network dropped connection on
reset
telnet: Unable to connect to remote host
There is one of two things happening here,
1. cox's is filtering ports. (they do that to me)
2. Ports is not set up correctly.
Let me know if you need any help.
--- In az_vjc@y..., "hiett710" <hiett710@y...> wrote:
> Timed out
> If your behind a router you need to open the port.
> Mike
>
> --- In az_vjc@y..., "David Withers" <dr_ww@h...> wrote:
> >
43244 From: AzVJC Website <azvjc@a...>
Date: Tue Feb 19, 2002 2:34pm
Subject: [FS] Vendor Items Added
Hello Members of the AzVJC,
Mike is Testing.... Just Testing.... has just added some items to the Classified section of the AzVJC Website that may be of interest to you. To see these items Click Here or goto the website classifieds and select 'Vendor' from the list.
Thank You,
- The AzVJC Website
43245 From: wishmaaker <wishmaaker@y...>
Date: Tue Feb 19, 2002 1:04pm
Subject: Its starting to look like Vendor Spamming!!
--- In az_vjc@y..., Chris Krieg <rv6a@m...> wrote:
> Yeah, as long as they are givng us a good discount it might be OK as
long as
> it doesn't get out of hand and clog up the for sale database. If
they are
> just using us to advertise normal priced stuff, then send them
packing.
>
> Chris K
>
> From: "Keith Haw" <khaw@n...>
> Date: Tue, 19 Feb 2002 12:52:51 -0700
> To: "'AZ_VJC'" <az_vjc@y...>, "David Withers" <dr_ww@h...>
> Subject: Re: [az_vjc] does seem like we have a lot of vendors
joining lately
> or is it me?
>
>
> It's OK with me. Seems like they all give us a discount!
> hint-hint :)
>
> Keith
>
> ----- Original Message -----
> From: David Withers <mailto:dr_ww@h...>
> To: 'AZ_VJC' <mailto:az_vjc@y...>
> Sent: Tuesday, February 19, 2002 12:44 PM
> Subject: [az_vjc] does seem like we have a lot of vendors joining
lately or
> is it me?
>
> 4 wheelers
> tuff toys
> gloecco
> daystar
> just to name a few
>
> David R. W. Withers
> Desk: 480.551.4667
> Mobile: 480.215.6992
>
>
>
> Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
> <http://docs.yahoo.com/info/terms/> .
>
> Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
> <http://docs.yahoo.com/info/terms/> .
43246 From: az_jeeper_mike <azvjc@a...>
Date: Tue Feb 19, 2002 2:42pm
Subject: Re: Vendor Adds
OK! Wow!
Because of all the latest, I've added a catagory to the Classifieds
section called "Vendors."
Vendor advertisements will not be sent to the group e-mail, and they
will be listed on their own page so that they won't overrun member's
postings.
Becuase these items won't be sent to the list, I added an e-mail form
vendors can use to let the list know when they have added some
things. It will say something like:
---------------------
Hello AzVJC,
[Vendor Name] has added some items to the AzVJC website classifieds
that may be of interest to you. To view these items, click here.
- The AzVJC Website
---------------------
To the vendors on the list I hope this is a fair arrangement for
you. Feel free to post as many items as you wish, just make sure to
select "Vendors" from the drop down list. And remember all
classifieds expire in 30 days so it is best that the classifieds be
used to promote specials, limited time offers, sales, etc...
Thanks,
- Mike
43247 From: g_rob_williams <g_rob_williams@y...>
Date: Tue Feb 19, 2002 9:00am
Subject: Re: Rear Seat
The only problem I see is that the seat belt attaches to the ront of
the roll bar in the back, so you would probably want to remove them
entirely and get either lap belts, or a couple harnesses, but you
are also putting the rear passengers BEHIND the roll bars... may not
be wise... -Rob
43248 From: James Towle <James.Towle@a...>
Date: Tue Feb 19, 2002 2:49pm
Subject: Re: [FS] Dana 300 transfer case in great shape 480-695-4949
Jason,
If you are going to list stuff for sale, why don't you at least give it a
reasonable price? I mean common $350 for a D300 does it already have the
4:1?
Why don't you list your email address in the ad? Do you have a one way door
on that computer?
Is this posting thing of highly priced used parts 10 times a day going to
continue?
I mean really, I don't mind buying used stuff from group members but, used
stuff from vendors that is twice what it should be. Give me a break.
Be aware of what you are doing, please.
--James
PS - I am tried of dealing with uninformed junk yard dealers that think that
waggie D44 are worth $500/ea, this is bull Sh_t. Excuse me if I rant.
--- In az_vjc@y..., AzVJC Website <azvjc@a...> wrote:
>
43249 From: <hillb@s...>
Date: Tue Feb 19, 2002 2:47pm
Subject: Re: [FS] Vendor Items Added
This format works a lot better than sending loads of [FS] messages to the
group.
AzVJC Website
<azvjc@azvjc. To: AzVJC <az_vjc@YahooGroups.com>
org> cc:
Subject: [az_vjc] [FS] Vendor Items Added
02/19/2002
03:34 PM
Please
respond to
az_vjc
Hello Members of the AzVJC,
Mike is Testing.... Just Testing.... has just added some items to the
Classified section of the AzVJC Website that may be of interest to you. To
see these items Click Here or goto the website classifieds and select
'Vendor' from the list.
Thank You,
- The AzVJC Website
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
43250 From: sidneymd <sidneymd@s...>
Date: Tue Feb 19, 2002 9:13am
Subject: Re: Powertrax No Slip at the front differential
What a locker class Mike, thanks a lot.
I was also considering the Ox Trax, but they are almost twice the
price of a PowerTrax No Slip and about four times the Lock Right.
With the exchange rate at 2.5:1 and a shopping quota of US$ 500.00,
there's not too much I can do.
As I said our realities are too far diferent.
Thanks again, and if you'd like to see some pictures of our tracks
and Jipes here, please go to
www.sidneymud.hpg.com.br
[]'s
Sidney - Brazil
CJ-5/68
--- In az_vjc@y..., "az_jeeper_mike" <azvjc@a...> wrote:
> Sidney,
>
> I wheeled in Panama for a few years with a CJ-5 that had a Power-
Lock
> in the front. While not a true locker like the Powertrax No-Slip,
it
> was plenty for the mud. If fact sometimes it was too much.
>
> Imagine yourself driving down a steep muddy hill, the road turns,
you
> turn the wheel and your Jeep continues straight. This happened to
me
> numerous times with the Powerlock, and (get this) to get it turn
> going down hill, I had to step on the gas!
>
> The way the powerlock works is it allows a certain amount of slip,
> until the spider gears climb each other, then it locks up. In the
> mud going up hills or through bogs this is great, as long as you're
> on the gas, the front is locked. When you back of the gas, it
> unlocks. On downhills, the opposite is true, when it locks up, it
> will remain locked as long as you're using the engine to slow you
> down; in order to unlock it you have to either step on the gas a
> little (recommended) or push in the clutch (not recommended); as
soon
> as you do though, it unlocks and you gain steering control.
>
> A true locker (powertrax no slip, detroit, lock-right, etc..) in
the
> front could prove very dangerous on the slick stuff, especially if
> you're wheeling where there are large drop offs. If it is all
flat,
> mudbogs then a locker would be ok, albiet you'll loose some
steering
> control.
>
> Also remember with two lockers on a slippery sidehill, you'll
always
> slide down hill.
>
> I think for mud a locker in the rear and a Powerlock in the front
is
> a good combo if you don't have the cash for an OX or ARB.
>
>
> Hope this helps,
>
> - Mike
>
> --- In az_vjc@y..., "sidneymd" <sidneymd@s...> wrote:
> > Hi folks,
> >
> > I writing from Brazil. I rarely post a message to the list
although
> I
> > real most of them. Our realities are too much different, tracks
and
> > parts -)))
> >
> > I'd like to ask you a question: does any of you run a PowerTrax
No
> > Slip at the front differential with manual locking hubs? Tracks
> > mainly with mud, heavy mud.
> >
> > What are the pro and against in doing this?
> >
> > I already have one at the rear differential and I'm very pleased
> with
> > it.
> >
> > I'm going to be in the San Diego area from March 8th. till 14th.
> and
> > I'm considering to get another one.
> >
> > Thank you for your attention. Replies in PVT if you don't mind.
> >
> > []s
> >
> > Sidney - Brazil
> > CJ-5/68
> > www.sidneymd.hpg.com.br
43251 From: Chris Krieg <rv6a@m...>
Date: Tue Feb 19, 2002 2:57pm
Subject: Re: [FS] Vendor Items Added
Very cool.
Maybe add a line under the "select a category" line that reminds vendors to use the vendor area?
Chris K
From: AzVJC Website
Reply-To: az_vjc@YahooGroups.com
Date: Tue, 19 Feb 2002 22:34:01 (GMT)
To: AzVJC
Subject: [az_vjc] [FS] Vendor Items Added
Hello Members of the AzVJC,
Mike is Testing.... Just Testing.... has just added some items to the Classified section of the AzVJC Website that may be of interest to you. To see these items Click Here or goto the website classifieds and select 'Vendor' from the list.
Thank You,
- The AzVJC Website
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service .
43252 From: Chris Krieg <rv6a@m...>
Date: Tue Feb 19, 2002 2:54pm
Subject: Dana 300 service manual?
OK all you CJ guys (and gals) out there. I just got my Teralow gearset and
the install instructions say:
"Please follow the Dana 300 rebuild instructions in the Jeep service manual"
Um, OK. Now where do I get a Dana 300 service manual or where can I find a
good CJ service manual that might have this info? All I have is the
Chilton's manual that I used when I had a CJ-5 but all it tells you how to
do is remove and replace the tcase and shows you a diagram of all the parts.
Thanks,
Chris K
43253 From: Mike <h8pvmnt@h...>
Date: Tue Feb 19, 2002 3:20pm
Subject: Fw: AZ Rock Crawl Volunteers
The official explanation of the rock Crawl.
Mike Wixom
85 CJ-7
----- Original Message -----
From: Sandee McCullen
To: Mike
Sent: Tuesday, February 19, 2002 3:41 PM
Subject: RE: AZ Rock Crawl Volunteers
IMPORTANT NOTICE
ARIZONA ROCK CRAWL
DUE TO CIRCUMSTANCES BEYOND ANYONES CONTROL THE ARIZONA ROCK CRAWL SCHEDULED FOR MARCH 2 & 3 HAS BEEN CANCELLED.
The Arizona Rock Crawlers will host a club weekend this same weekend at the old Jamboree site on the south side of Cottonwood Canyon Rd just before crossing the cattleguard entering BLM lands. (off Hwy 79 between M.P. 144 & 145. ……. Entrance between M.P. 215 & 216 off Hwy 60 is also available for those not wishing to join us at camp and simply watch the "fun on the rocks".
Join us for a chili dinner and campfire on Saturday evening and a "fun rock crawl" on Sunday.
Everyone is invited and those that wish to "play on the rocks" are asked to check in and tech before 10:00 p.m. Saturday night. Everyone participating will still be required to follow ARCA safety rules as stated in the Rock Crawl registration and flyer. We will have unofficial judges to score so everyone can compare "how you did" but there will be no fees or awards.
There were not enough entries to "cover costs" of putting this event on successfully. Also with this the BLM again put the screws to the recreational 4-wheeler. The "pre-permit" with 8 pages of "stipulations" was received Wednesday last week. It is impossible to function under this many rules.
Examples:
Fees included paying 3% of the gross receipts including what vendors or sponsors donate…… shirt values, prize money, vendor sales, plus registration fees, etc……….
Must submit a "parking/traffic plan" to be subject to approval by the BLM.
Must identify parking areas, staffing, flaggers, enforcement, signing, no parking areas, rope off all areas not used, identify off site parking and provide shuttle service to and from parking areas…………………
Cannot "sensationalize" the event….. in other words: cannot advertise or announce it.
Must include hundreds of dollars of "printed information materials" to competitors and spectators.
Must have a huge number of port-a-jons available.
Must allow BLM to "help place course markers" to insure safe cultural site protection.
Last but not least………. They have to "hoot" for Pygmy Owls the week prior to the event. Now remember, this is the same area we are not allowed into to "drive over the rocks" but BLM issued a permit to a landscaper to "Quarry HUGE boulders" from this same area using cranes and huge trucks!
Now to answer some of the questions floating throughout the internet and phone lines:
First of all this event was never an ASA4WDC event. ASA4WDC participation was simply that the Arizona Rock Crawlers is a club within the ASA4WDC and a number of ASA4WDC members were helping by volunteering as judges. ASA4WDC supports all it's clubs activities or events. That does not mean the ASA4WDC is the hosting entity.
The Arizona Rock Crawlers have always been the promoting body and ARCA has always been the sanctioning body. Nothing has ever been changed. Originally the date had been announced as March 16-17 but no paperwork had ever been published with this date. The registration and information form out on ASA4WDC's WEB page and s on ARCA's WEB page has never been changed. The "Sportsman" class has always been offered. It was always portrayed to be the "preliminaries into ARCA Nationals"……… NOT an ARCA Nationals event or level.
ARC apologizes to all of you that felt the entry was misrepresented……….. this event was never intended to "compete" with ARCA. ARCA is trying to initiate local clubs across the country to host "preliminary rock crawls" to offer experience into ARCA Nationals… Obviously there was an oversight in "explaining" that this event was not intended to be ARCA Nationals………..
Had we had a "full slate" of support from the competitors we would have dealt with BLM but the ARC could not "fund" both. With your support we will strive to make this bigger and better in the future. We realize, as does ARCA, that there are huge numbers of "rock crawlers" out there that do not want to compete on the National level. ARCA wants to support "local level rock crawl competitions" for this reason. The local competitions encouraged across the country are not intended to be National level.
A.R.C. apologize to all of you that felt this event was misrepresented……….. we ask for your input and help in making this a successful event in the future!
-----Original Message-----
From: Mike [mailto:h8pvmnt@hotmail.com]
Sent: Friday, February 08, 2002 10:18 AM
To: Sandee McCullen
Subject: AZ Rock Crawl Volunteers
Sandee,
I talked to you at the Dust Devils Meeting about volunteering for the event. Could you send me the info, requirements, schedule etc. Myself and a friend would like to possibly volunteer.
Mike Wixom
85 CJ-7
43254 From: wishmaaker <wishmaaker@y...>
Date: Tue Feb 19, 2002 1:50pm
Subject: Re: ------------LAP BELTS---------
I bet Jason over at tuff toys has some belts he wants to get rid
of....=)
--- In az_vjc@y..., "kmichael02" <kmichael02@y...> wrote:
> Any one have lap belts they want to get rid of???
>
> thanks mike
43255 From: AzVJC Website <azvjc@a...>
Date: Tue Feb 19, 2002 2:32pm
Subject: [TR] Unspecified - Saturday, February 23, 2002
Hello All,
Michael Soo is leading an Unspecified trail run on Saturday, February 23, 2002.
When: Saturday, February 23, 2002
Where: Powerline Road (2.0-4.0) in Sierra Vista, AZ
Rating: None
Length: Not sure
CB Channel: 4
A couple of friends of mine and I are going to go have some fun on Powerline road. Exploration and maybe some fun in the sand wash. We will be on Channel 4. If you want to attend, give me a call at 480-206-3897.
Michael
Click Here To Add Your Name to the Sign Up List
Thank You,
- The AzVJC Website
43256 From: jb_wrnglr <JNB4PLS@a...>
Date: Tue Feb 19, 2002 8:52am
Subject: Bad Ball Joint Symptoms?
Can anyone tell me what the symptoms of a bad ball joint would be?
Thanks in advance,
John Butler
43257 From: jetowle2000 <James.Towle@a...>
Date: Tue Feb 19, 2002 3:05pm
Subject: Re: Vendor Adds
Mike,
Thanks for the quick work. Once again I can't belive how fast you
come to action.
What's to stop them from posting on the other ad section?
--James
BTW - If anyone wants to contact the guy by eamil that is putting all
the ads on send it to: tuff_toys@h...
--- In az_vjc@y..., "az_jeeper_mike" <azvjc@a...> wrote:
> OK! Wow!
>
> Because of all the latest, I've added a catagory to the Classifieds
> section called "Vendors."
>
> Vendor advertisements will not be sent to the group e-mail, and
they
> will be listed on their own page so that they won't overrun
member's
> postings.
>
> Becuase these items won't be sent to the list, I added an e-mail
form
> vendors can use to let the list know when they have added some
> things. It will say something like:
>
> ---------------------
> Hello AzVJC,
> [Vendor Name] has added some items to the AzVJC website classifieds
> that may be of interest to you. To view these items, click here.
>
> - The AzVJC Website
> ---------------------
>
> To the vendors on the list I hope this is a fair arrangement for
> you. Feel free to post as many items as you wish, just make sure
to
> select "Vendors" from the drop down list. And remember all
> classifieds expire in 30 days so it is best that the classifieds be
> used to promote specials, limited time offers, sales, etc...
>
> Thanks,
>
> - Mike
43258 From: az_jeeper_mike <Mike@A...>
Date: Tue Feb 19, 2002 3:29pm
Subject: Re: Vendor Adds
> What's to stop them from posting on the other ad section?
That will tick off the membership and they'll loose business. :)
Basically it is the honor system. But I suspect that a business
wouldn't be interested in ignoring the guidlines if it was just going
to drive business away by ticking off the very audience they're
trying to capture.
- Mike
43259 From: AzVJC Website <azvjc@a...>
Date: Tue Feb 19, 2002 3:21pm
Subject: [FS] right rear 35 axle shaft from 99 tj
Price: 40.00
Contact: squarelights@aol.com
from a 99 tj good shape, for a d35c right rear.
602.762.0490
43235 From: David R. W. Withers <dr_ww@h...>
Date: Tue Feb 19, 2002 1:20pm
Subject: RE: Vendor Adds
he could list everything in one add, that would be fine with me
David
-----Original Message-----
From: Scott Thomas [mailto:sthomas@architekton.com]
Sent: Tuesday, February 19, 2002 2:15 PM
To: Joe Kearney; AzVJC
Subject: RE: [az_vjc] Vendor Adds
I have to agree with you Joe. Or every once in a while send an e-mail out saying that this is on sale for this time and AZVJC members get it at this price. But this is a lot that they are sending now.
Just my two cents.
Scott Thomas
97' Tj
-----Original Message-----
From: Joe Kearney [mailto:JoeKPhx@hotmail.com]
Sent: Tuesday, February 19, 2002 2:08 PM
To: AzVJC
Subject: [az_vjc] Vendor Adds
OK Now I think this is just a little too much. I do not mind getting info like "AZ_VJC'ers get 10% off at our site" but to send out emails with all of their parts is too much.
Thoughts?
Joe Kearney
Joe@JRKearney.com
----- Original Message -----
From: AzVJC Website
To: AzVJC
Sent: Tuesday, February 19, 2002 9:04 PM
Subject: [az_vjc] [FS] New CARR light bar with 4 offroad lights $120 480-695-4949
Price: $120
Contact: Ron at Tuff Toys 480-695-4949
Jason Enyart
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
--------------------------------------------------------------------------------
ADVERTISEMENT
43236 From: Chris Krieg <rv6a@m...>
Date: Tue Feb 19, 2002 1:17pm
Subject: Re: Vendor Adds
OK. I gave TuffToys a call and suggested they put together one post with all the things they have and prices. Then mail that one list to the group instead of the multiple entries they had. They were very responsive on the phone.
Chris K
From: "Joe Kearney"
Date: Tue, 19 Feb 2002 14:07:45 -0700
To: "AzVJC"
Subject: [az_vjc] Vendor Adds
OK Now I think this is just a little too much. I do not mind getting info like "AZ_VJC'ers get 10% off at our site" but to send out emails with all of their parts is too much.
Thoughts?
Joe Kearney
Joe@JRKearney.com
----- Original Message -----
From: AzVJC Website
To: AzVJC
Sent: Tuesday, February 19, 2002 9:04 PM
Subject: [az_vjc] [FS] New CARR light bar with 4 offroad lights $120 480-695-4949
Price: $120
Contact: Ron at Tuff Toys 480-695-4949
Jason Enyart
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service .
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service .
43237 From: AzVJC Website <azvjc@a...>
Date: Tue Feb 19, 2002 1:22pm
Subject: [FS] Wanted - AMC20 Locker
Price: You tell me
Contact: Clyde McKay
Please email me at clyde@mckaylink.com
43238 From: <SIMONLUKER@A...>
Date: Tue Feb 19, 2002 8:23am
Subject: (no subject)
ONE AD WOULD BE COOL, BUT IT LOOKS LIKE THEY HAVE SOME GOOD ITEMS. HEY AT
LEAST THEY ARE TRYING. LETS MOVE ON!
43239 From: kmichael02 <kmichael02@y...>
Date: Tue Feb 19, 2002 1:37pm
Subject: ------------LAP BELTS---------
Any one have lap belts they want to get rid of???
thanks mike
43240 From: Halverson <byrnec@q...>
Date: Tue Feb 19, 2002 1:56pm
Subject: Re: [FS] 700R4 built to the hilt corvette servos all the best of the best 480-695-4949
Just call us the Arizona Virtual Tuff Toys Advertising Club------geez what is this?
John
----- Original Message -----
From: AzVJC Website
To: AzVJC
Sent: Tuesday, February 19, 2002 7:47 PM
Subject: [az_vjc] [FS] 700R4 built to the hilt corvette servos all the best of the best 480-695-4949
Price: $900
Contact: Ron at Tuff Toys 480-695-4949
Jason Enyart
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
43241 From: Mike & Karen Acuna <macunasprint@e...>
Date: Tue Feb 19, 2002 2:16pm
Subject: Re: does seem like we have a lot of vendors joininglately or is it me?
I agree, put a stop to this madness. They could e-mail any info to interested parties.
Mike
Chris Krieg wrote:
OK. Jason and Ron at TuffToys are getting out of hand. So far, they have posted 11 ads. I don't think it is appropriate to post their entire used inventory on our site. A post saying they have many parts and to call them might be OK, but he is using our site to advertise everything he has. That pushes all the legit member forsale posts to the bottom of the database.
Chris
From: Chris Krieg
Date: Tue, 19 Feb 2002 14:02:25 -0700
To: Keith Haw , "'AZ_VJC'" , David Withers
Subject: Re: [az_vjc] does seem like we have a lot of vendors joining lately or is it me?
Yeah, as long as they are givng us a good discount it might be OK as long as it doesn't get out of hand and clog up the for sale database. If they are just using us to advertise normal priced stuff, then send them packing.
Chris K
From: "Keith Haw"
Date: Tue, 19 Feb 2002 12:52:51 -0700
To: "'AZ_VJC'" , "David Withers"
Subject: Re: [az_vjc] does seem like we have a lot of vendors joining lately or is it me?
It's OK with me. Seems like they all give us a discount!
hint-hint :)
Keith
----- Original Message -----
From: David Withers <mailto:dr_ww@hotmail.com>
To: 'AZ_VJC' <mailto:az_vjc@yahoogroups.com>
Sent: Tuesday, February 19, 2002 12:44 PM
Subject: [az_vjc] does seem like we have a lot of vendors joining lately or is it me?
4 wheelers
tuff toys
gloecco
daystar
just to name a few
David R. W. Withers
Desk: 480.551.4667
Mobile: 480.215.6992
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service <http://docs.yahoo.com/info/terms/> .
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service <http://docs.yahoo.com/info/terms/> .
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service <http://docs.yahoo.com/info/terms/> .
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
43242 From: wishmaaker <wishmaaker@y...>
Date: Tue Feb 19, 2002 11:51am
Subject: replacing rear seat with...
I didn't get much of a return on my post earlier about moving my rear
seat back to get a little more leg room, which is okay, because I
have a new idea, I am thinking about purchasing some front TJ seats
and mounting them in the back, I know I will have to come up with
some sort or bracket to mount the seats in the rear, anyone out there
with welding skills and equipment that would be willing to lend their
services in assisting me with this project? Or just ideas on ways to
mount/build the bracket would be much appreciated. Tell me what you
think!
TIA
43243 From: wishmaaker <wishmaaker@y...>
Date: Tue Feb 19, 2002 6:46am
Subject: Re: Can some one try my website links,,, Jack handle pics also
bash$ telnet 68.3.165.149 80
Trying 68.3.165.149...
telnet: connect to address 68.3.165.149: Network dropped connection on
reset
telnet: Unable to connect to remote host
There is one of two things happening here,
1. cox's is filtering ports. (they do that to me)
2. Ports is not set up correctly.
Let me know if you need any help.
--- In az_vjc@y..., "hiett710" <hiett710@y...> wrote:
> Timed out
> If your behind a router you need to open the port.
> Mike
>
> --- In az_vjc@y..., "David Withers" <dr_ww@h...> wrote:
> >
43244 From: AzVJC Website <azvjc@a...>
Date: Tue Feb 19, 2002 2:34pm
Subject: [FS] Vendor Items Added
Hello Members of the AzVJC,
Mike is Testing.... Just Testing.... has just added some items to the Classified section of the AzVJC Website that may be of interest to you. To see these items Click Here or goto the website classifieds and select 'Vendor' from the list.
Thank You,
- The AzVJC Website
43245 From: wishmaaker <wishmaaker@y...>
Date: Tue Feb 19, 2002 1:04pm
Subject: Its starting to look like Vendor Spamming!!
--- In az_vjc@y..., Chris Krieg <rv6a@m...> wrote:
> Yeah, as long as they are givng us a good discount it might be OK as
long as
> it doesn't get out of hand and clog up the for sale database. If
they are
> just using us to advertise normal priced stuff, then send them
packing.
>
> Chris K
>
> From: "Keith Haw" <khaw@n...>
> Date: Tue, 19 Feb 2002 12:52:51 -0700
> To: "'AZ_VJC'" <az_vjc@y...>, "David Withers" <dr_ww@h...>
> Subject: Re: [az_vjc] does seem like we have a lot of vendors
joining lately
> or is it me?
>
>
> It's OK with me. Seems like they all give us a discount!
> hint-hint :)
>
> Keith
>
> ----- Original Message -----
> From: David Withers <mailto:dr_ww@h...>
> To: 'AZ_VJC' <mailto:az_vjc@y...>
> Sent: Tuesday, February 19, 2002 12:44 PM
> Subject: [az_vjc] does seem like we have a lot of vendors joining
lately or
> is it me?
>
> 4 wheelers
> tuff toys
> gloecco
> daystar
> just to name a few
>
> David R. W. Withers
> Desk: 480.551.4667
> Mobile: 480.215.6992
>
>
>
> Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
> <http://docs.yahoo.com/info/terms/> .
>
> Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
> <http://docs.yahoo.com/info/terms/> .
43246 From: az_jeeper_mike <azvjc@a...>
Date: Tue Feb 19, 2002 2:42pm
Subject: Re: Vendor Adds
OK! Wow!
Because of all the latest, I've added a catagory to the Classifieds
section called "Vendors."
Vendor advertisements will not be sent to the group e-mail, and they
will be listed on their own page so that they won't overrun member's
postings.
Becuase these items won't be sent to the list, I added an e-mail form
vendors can use to let the list know when they have added some
things. It will say something like:
---------------------
Hello AzVJC,
[Vendor Name] has added some items to the AzVJC website classifieds
that may be of interest to you. To view these items, click here.
- The AzVJC Website
---------------------
To the vendors on the list I hope this is a fair arrangement for
you. Feel free to post as many items as you wish, just make sure to
select "Vendors" from the drop down list. And remember all
classifieds expire in 30 days so it is best that the classifieds be
used to promote specials, limited time offers, sales, etc...
Thanks,
- Mike
43247 From: g_rob_williams <g_rob_williams@y...>
Date: Tue Feb 19, 2002 9:00am
Subject: Re: Rear Seat
The only problem I see is that the seat belt attaches to the ront of
the roll bar in the back, so you would probably want to remove them
entirely and get either lap belts, or a couple harnesses, but you
are also putting the rear passengers BEHIND the roll bars... may not
be wise... -Rob
43248 From: James Towle <James.Towle@a...>
Date: Tue Feb 19, 2002 2:49pm
Subject: Re: [FS] Dana 300 transfer case in great shape 480-695-4949
Jason,
If you are going to list stuff for sale, why don't you at least give it a
reasonable price? I mean common $350 for a D300 does it already have the
4:1?
Why don't you list your email address in the ad? Do you have a one way door
on that computer?
Is this posting thing of highly priced used parts 10 times a day going to
continue?
I mean really, I don't mind buying used stuff from group members but, used
stuff from vendors that is twice what it should be. Give me a break.
Be aware of what you are doing, please.
--James
PS - I am tried of dealing with uninformed junk yard dealers that think that
waggie D44 are worth $500/ea, this is bull Sh_t. Excuse me if I rant.
--- In az_vjc@y..., AzVJC Website <azvjc@a...> wrote:
>
43249 From: <hillb@s...>
Date: Tue Feb 19, 2002 2:47pm
Subject: Re: [FS] Vendor Items Added
This format works a lot better than sending loads of [FS] messages to the
group.
AzVJC Website
<azvjc@azvjc. To: AzVJC <az_vjc@YahooGroups.com>
org> cc:
Subject: [az_vjc] [FS] Vendor Items Added
02/19/2002
03:34 PM
Please
respond to
az_vjc
Hello Members of the AzVJC,
Mike is Testing.... Just Testing.... has just added some items to the
Classified section of the AzVJC Website that may be of interest to you. To
see these items Click Here or goto the website classifieds and select
'Vendor' from the list.
Thank You,
- The AzVJC Website
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
43250 From: sidneymd <sidneymd@s...>
Date: Tue Feb 19, 2002 9:13am
Subject: Re: Powertrax No Slip at the front differential
What a locker class Mike, thanks a lot.
I was also considering the Ox Trax, but they are almost twice the
price of a PowerTrax No Slip and about four times the Lock Right.
With the exchange rate at 2.5:1 and a shopping quota of US$ 500.00,
there's not too much I can do.
As I said our realities are too far diferent.
Thanks again, and if you'd like to see some pictures of our tracks
and Jipes here, please go to
www.sidneymud.hpg.com.br
[]'s
Sidney - Brazil
CJ-5/68
--- In az_vjc@y..., "az_jeeper_mike" <azvjc@a...> wrote:
> Sidney,
>
> I wheeled in Panama for a few years with a CJ-5 that had a Power-
Lock
> in the front. While not a true locker like the Powertrax No-Slip,
it
> was plenty for the mud. If fact sometimes it was too much.
>
> Imagine yourself driving down a steep muddy hill, the road turns,
you
> turn the wheel and your Jeep continues straight. This happened to
me
> numerous times with the Powerlock, and (get this) to get it turn
> going down hill, I had to step on the gas!
>
> The way the powerlock works is it allows a certain amount of slip,
> until the spider gears climb each other, then it locks up. In the
> mud going up hills or through bogs this is great, as long as you're
> on the gas, the front is locked. When you back of the gas, it
> unlocks. On downhills, the opposite is true, when it locks up, it
> will remain locked as long as you're using the engine to slow you
> down; in order to unlock it you have to either step on the gas a
> little (recommended) or push in the clutch (not recommended); as
soon
> as you do though, it unlocks and you gain steering control.
>
> A true locker (powertrax no slip, detroit, lock-right, etc..) in
the
> front could prove very dangerous on the slick stuff, especially if
> you're wheeling where there are large drop offs. If it is all
flat,
> mudbogs then a locker would be ok, albiet you'll loose some
steering
> control.
>
> Also remember with two lockers on a slippery sidehill, you'll
always
> slide down hill.
>
> I think for mud a locker in the rear and a Powerlock in the front
is
> a good combo if you don't have the cash for an OX or ARB.
>
>
> Hope this helps,
>
> - Mike
>
> --- In az_vjc@y..., "sidneymd" <sidneymd@s...> wrote:
> > Hi folks,
> >
> > I writing from Brazil. I rarely post a message to the list
although
> I
> > real most of them. Our realities are too much different, tracks
and
> > parts -)))
> >
> > I'd like to ask you a question: does any of you run a PowerTrax
No
> > Slip at the front differential with manual locking hubs? Tracks
> > mainly with mud, heavy mud.
> >
> > What are the pro and against in doing this?
> >
> > I already have one at the rear differential and I'm very pleased
> with
> > it.
> >
> > I'm going to be in the San Diego area from March 8th. till 14th.
> and
> > I'm considering to get another one.
> >
> > Thank you for your attention. Replies in PVT if you don't mind.
> >
> > []s
> >
> > Sidney - Brazil
> > CJ-5/68
> > www.sidneymd.hpg.com.br
43251 From: Chris Krieg <rv6a@m...>
Date: Tue Feb 19, 2002 2:57pm
Subject: Re: [FS] Vendor Items Added
Very cool.
Maybe add a line under the "select a category" line that reminds vendors to use the vendor area?
Chris K
From: AzVJC Website
Reply-To: az_vjc@YahooGroups.com
Date: Tue, 19 Feb 2002 22:34:01 (GMT)
To: AzVJC
Subject: [az_vjc] [FS] Vendor Items Added
Hello Members of the AzVJC,
Mike is Testing.... Just Testing.... has just added some items to the Classified section of the AzVJC Website that may be of interest to you. To see these items Click Here or goto the website classifieds and select 'Vendor' from the list.
Thank You,
- The AzVJC Website
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service .
43252 From: Chris Krieg <rv6a@m...>
Date: Tue Feb 19, 2002 2:54pm
Subject: Dana 300 service manual?
OK all you CJ guys (and gals) out there. I just got my Teralow gearset and
the install instructions say:
"Please follow the Dana 300 rebuild instructions in the Jeep service manual"
Um, OK. Now where do I get a Dana 300 service manual or where can I find a
good CJ service manual that might have this info? All I have is the
Chilton's manual that I used when I had a CJ-5 but all it tells you how to
do is remove and replace the tcase and shows you a diagram of all the parts.
Thanks,
Chris K
43253 From: Mike <h8pvmnt@h...>
Date: Tue Feb 19, 2002 3:20pm
Subject: Fw: AZ Rock Crawl Volunteers
The official explanation of the rock Crawl.
Mike Wixom
85 CJ-7
----- Original Message -----
From: Sandee McCullen
To: Mike
Sent: Tuesday, February 19, 2002 3:41 PM
Subject: RE: AZ Rock Crawl Volunteers
IMPORTANT NOTICE
ARIZONA ROCK CRAWL
DUE TO CIRCUMSTANCES BEYOND ANYONES CONTROL THE ARIZONA ROCK CRAWL SCHEDULED FOR MARCH 2 & 3 HAS BEEN CANCELLED.
The Arizona Rock Crawlers will host a club weekend this same weekend at the old Jamboree site on the south side of Cottonwood Canyon Rd just before crossing the cattleguard entering BLM lands. (off Hwy 79 between M.P. 144 & 145. ……. Entrance between M.P. 215 & 216 off Hwy 60 is also available for those not wishing to join us at camp and simply watch the "fun on the rocks".
Join us for a chili dinner and campfire on Saturday evening and a "fun rock crawl" on Sunday.
Everyone is invited and those that wish to "play on the rocks" are asked to check in and tech before 10:00 p.m. Saturday night. Everyone participating will still be required to follow ARCA safety rules as stated in the Rock Crawl registration and flyer. We will have unofficial judges to score so everyone can compare "how you did" but there will be no fees or awards.
There were not enough entries to "cover costs" of putting this event on successfully. Also with this the BLM again put the screws to the recreational 4-wheeler. The "pre-permit" with 8 pages of "stipulations" was received Wednesday last week. It is impossible to function under this many rules.
Examples:
Fees included paying 3% of the gross receipts including what vendors or sponsors donate…… shirt values, prize money, vendor sales, plus registration fees, etc……….
Must submit a "parking/traffic plan" to be subject to approval by the BLM.
Must identify parking areas, staffing, flaggers, enforcement, signing, no parking areas, rope off all areas not used, identify off site parking and provide shuttle service to and from parking areas…………………
Cannot "sensationalize" the event….. in other words: cannot advertise or announce it.
Must include hundreds of dollars of "printed information materials" to competitors and spectators.
Must have a huge number of port-a-jons available.
Must allow BLM to "help place course markers" to insure safe cultural site protection.
Last but not least………. They have to "hoot" for Pygmy Owls the week prior to the event. Now remember, this is the same area we are not allowed into to "drive over the rocks" but BLM issued a permit to a landscaper to "Quarry HUGE boulders" from this same area using cranes and huge trucks!
Now to answer some of the questions floating throughout the internet and phone lines:
First of all this event was never an ASA4WDC event. ASA4WDC participation was simply that the Arizona Rock Crawlers is a club within the ASA4WDC and a number of ASA4WDC members were helping by volunteering as judges. ASA4WDC supports all it's clubs activities or events. That does not mean the ASA4WDC is the hosting entity.
The Arizona Rock Crawlers have always been the promoting body and ARCA has always been the sanctioning body. Nothing has ever been changed. Originally the date had been announced as March 16-17 but no paperwork had ever been published with this date. The registration and information form out on ASA4WDC's WEB page and s on ARCA's WEB page has never been changed. The "Sportsman" class has always been offered. It was always portrayed to be the "preliminaries into ARCA Nationals"……… NOT an ARCA Nationals event or level.
ARC apologizes to all of you that felt the entry was misrepresented……….. this event was never intended to "compete" with ARCA. ARCA is trying to initiate local clubs across the country to host "preliminary rock crawls" to offer experience into ARCA Nationals… Obviously there was an oversight in "explaining" that this event was not intended to be ARCA Nationals………..
Had we had a "full slate" of support from the competitors we would have dealt with BLM but the ARC could not "fund" both. With your support we will strive to make this bigger and better in the future. We realize, as does ARCA, that there are huge numbers of "rock crawlers" out there that do not want to compete on the National level. ARCA wants to support "local level rock crawl competitions" for this reason. The local competitions encouraged across the country are not intended to be National level.
A.R.C. apologize to all of you that felt this event was misrepresented……….. we ask for your input and help in making this a successful event in the future!
-----Original Message-----
From: Mike [mailto:h8pvmnt@hotmail.com]
Sent: Friday, February 08, 2002 10:18 AM
To: Sandee McCullen
Subject: AZ Rock Crawl Volunteers
Sandee,
I talked to you at the Dust Devils Meeting about volunteering for the event. Could you send me the info, requirements, schedule etc. Myself and a friend would like to possibly volunteer.
Mike Wixom
85 CJ-7
43254 From: wishmaaker <wishmaaker@y...>
Date: Tue Feb 19, 2002 1:50pm
Subject: Re: ------------LAP BELTS---------
I bet Jason over at tuff toys has some belts he wants to get rid
of....=)
--- In az_vjc@y..., "kmichael02" <kmichael02@y...> wrote:
> Any one have lap belts they want to get rid of???
>
> thanks mike
43255 From: AzVJC Website <azvjc@a...>
Date: Tue Feb 19, 2002 2:32pm
Subject: [TR] Unspecified - Saturday, February 23, 2002
Hello All,
Michael Soo is leading an Unspecified trail run on Saturday, February 23, 2002.
When: Saturday, February 23, 2002
Where: Powerline Road (2.0-4.0) in Sierra Vista, AZ
Rating: None
Length: Not sure
CB Channel: 4
A couple of friends of mine and I are going to go have some fun on Powerline road. Exploration and maybe some fun in the sand wash. We will be on Channel 4. If you want to attend, give me a call at 480-206-3897.
Michael
Click Here To Add Your Name to the Sign Up List
Thank You,
- The AzVJC Website
43256 From: jb_wrnglr <JNB4PLS@a...>
Date: Tue Feb 19, 2002 8:52am
Subject: Bad Ball Joint Symptoms?
Can anyone tell me what the symptoms of a bad ball joint would be?
Thanks in advance,
John Butler
43257 From: jetowle2000 <James.Towle@a...>
Date: Tue Feb 19, 2002 3:05pm
Subject: Re: Vendor Adds
Mike,
Thanks for the quick work. Once again I can't belive how fast you
come to action.
What's to stop them from posting on the other ad section?
--James
BTW - If anyone wants to contact the guy by eamil that is putting all
the ads on send it to: tuff_toys@h...
--- In az_vjc@y..., "az_jeeper_mike" <azvjc@a...> wrote:
> OK! Wow!
>
> Because of all the latest, I've added a catagory to the Classifieds
> section called "Vendors."
>
> Vendor advertisements will not be sent to the group e-mail, and
they
> will be listed on their own page so that they won't overrun
member's
> postings.
>
> Becuase these items won't be sent to the list, I added an e-mail
form
> vendors can use to let the list know when they have added some
> things. It will say something like:
>
> ---------------------
> Hello AzVJC,
> [Vendor Name] has added some items to the AzVJC website classifieds
> that may be of interest to you. To view these items, click here.
>
> - The AzVJC Website
> ---------------------
>
> To the vendors on the list I hope this is a fair arrangement for
> you. Feel free to post as many items as you wish, just make sure
to
> select "Vendors" from the drop down list. And remember all
> classifieds expire in 30 days so it is best that the classifieds be
> used to promote specials, limited time offers, sales, etc...
>
> Thanks,
>
> - Mike
43258 From: az_jeeper_mike <Mike@A...>
Date: Tue Feb 19, 2002 3:29pm
Subject: Re: Vendor Adds
> What's to stop them from posting on the other ad section?
That will tick off the membership and they'll loose business. :)
Basically it is the honor system. But I suspect that a business
wouldn't be interested in ignoring the guidlines if it was just going
to drive business away by ticking off the very audience they're
trying to capture.
- Mike
43259 From: AzVJC Website <azvjc@a...>
Date: Tue Feb 19, 2002 3:21pm
Subject: [FS] right rear 35 axle shaft from 99 tj
Price: 40.00
Contact: squarelights@aol.com
from a 99 tj good shape, for a d35c right rear.
602.762.0490