Numerous Items to finish build!

[Turtle]

Okay, I need to put the MX on hold and finish my jeep that I still owe $7500 on : ) So below are a few of the bigger parts I can think of right off hand that will help big time!

Front and Rear Driveshafts Custom lengths I am unsure of yet : )

Torque Convertor. This is for a 1998 TJ with the 4 cyl. motor and (obviously) the auto tranny.

17" wheels. 5x4.5 Ideally I would like a 17x8 or 10 with 2.5" backspacing. However I will consider anything 17" for a 5x4.5 Bolt pattern... As long as they are round I am not worried about condition

Front trac bar bracket for the frame side. I will be using a RE HD trac bar and need the drop down bracket.

Right off hand those are the few big things that I can think of that I really need to get close to rolling.. Will post more later! Please PM me or post here with what ya have!!!

Thanks a ton!
Turtle

[SavageSun4x4]

Turtle, not sure what kind of bracket for your frame side track bar but this is what I used:
JKS Frame Conversion Bracket, Part # PN OGS925, $33.00 www.jksmfg.com/

I ordered mine from Simon down at 4wheel Supply.

I got a pic of here: http://web.mac.com/donpryor/iWeb/SavageSun%204x4/TJ%20Track%20Bar%20Install,.html

[Renob]

this is what I used:
JKS Frame Conversion Bracket, Part # PN OGS925, $33.00 www.jksmfg.com/You can make this out of two pieces of angle for a few dollars.

[SavageSun4x4]

You can make this out of two pieces of angle for a few dollars.
:confused: you are telling the wrong guy, tell him, not me:D