blooddrive
01-04-2004, 11:04 AM
42885-42909
42885 From: Gary MacLaren <gmaclaren@c...>
Date: Fri Feb 15, 2002 4:47pm
Subject: Fw: ACTION ALERT
-----Original Message-----
From: Joan Beck <fourby@citlink.net>
To: Undisclosed-Recipient:;
Date: Friday, February 15, 2002 4:15 PM
Subject: Fw: ACTION ALERT
----- Original Message -----
From: Scott Riebel
Sent: Friday, February 15, 2002 1:36 PM
Subject: ACTION ALERT
ACTION ALERT
DEPARTMENT OF INTERIOR
appears to be trying to avoid comments from the people FOR the
2002-2007 DOI Strategic Plan
In December 2001 and January 2002 they had 6 meeting, 4 in DC, 1 in Albuquerque and 1 in Denver reference the Plan. Attendance was by invitation only and the people invited were the environmental green groups and the animal rights groups. At the last minute, like 3-4 days before the meetings, they got around to inviting a very few from our side.
NOW they have published a notice in the February 14, 2002 Federal Register. The Department of the Interior has begun the process of
revising its strategic plan that covers the period of FY 2000-2005. The
process for developing the new plan will place a major emphasis on end-
results to be achieved by the Department and how these desired outcomes
can be effectively measured to assess our performance. COMMENTS ARE DUE MARCH 1, 2002. 2 WEEKS TIME
The document is available on the DOI web site http://www.doi.gov/gpra/. They are pdf files and there is one for each agency of DOI. It is not user friendly.
Suggested action: Immediately FAX a letter to the address below.
1) request a 90 to 120 days extension to the commend period.
2) request a copy of the plan be mailed to you.
3) request a meeting in your state with appropriate notice in the Federal Register and local newspapers.
4) CC your request to your federal, state and local elected officials. Most if not all of them probably do not know about this action.
5) Provide this information to as many people as you can.
E-mail: doistratplan@usgs.gov.
Fax: (202) 208-2619.
Mail: U.S. Department of the Interior, Office of the Secretary, Office
of Planning and Performance Management, 1849 C Street, NW B MS 5258, Washington, DC 20240.
FOR FURTHER INFORMATION: LeRon Bielak (202) 208-1818
FROM THE FEDERAL REGISTER.
SUPPLEMENTARY INFORMATION: The current plan, nine separate bureau and office plans and a Departmental Overview, will be replaced with a single, integrated plan.
Contrary to past practices of first publishing a draft plan for
comment, the DOI is soliciting stakeholder views through a series of
meetings and written comments on appropriate outcomes and strategies
that the Department should achieve in six primary mission areas. These
areas are:
1. Preservation of Natural and Cultural Resources.
2. Restoration of Natural and Cultural Resources.
3. Recreation Uses on Public Lands.
4. Use of Natural Resources (e.g., energy and non-energy minerals,
timber, water, grazing land, etc.).
5. Meeting our Trust Responsibilities to Native Americans, Alaskan
Natives, and Island Communities.
6. Role of Science in Meeting the Missions of the Department.
Information obtained from internal and external stakeholders will
be used to develop a revised strategic plan that is consistent with the
missions of the Department and the Government Performance and Results Act (GPRA) requirements.
Scott Riebel
Director of Environmental Affairs
United Four Wheel Drive Associations
www.ufwda.org
----------------------------------------------------------------------------------------------------
NOTE: In accordance with Title 17 U.S.C. section 107, any copyrighted material herein is distributed without profit or payment to those who have expressed a prior interest in receiving this information for non-profit research and educational purposes only. For more information go to: http://www.law.cornell.edu/uscode/17/107.shtml
--------------------------------------------------------------------------------
ADVERTISEMENT
42886 From: AzVJC Website <azvjc@a...>
Date: Fri Feb 15, 2002 4:47pm
Subject: [FS] 3" Teraflex TJ Coils
Price: $160
Contact: 480-694-3983
Front and rear Teraflex 3" TJ coils. 1.5 years old, good shape, although some of the powdercoating has flaked off. Getting taller coils, so don't need them anymore. Taking them off the jeep tomorrow morning.
Dan Coley
42887 From: Hackle <hackle@q...>
Date: Fri Feb 15, 2002 5:37pm
Subject: RE: Re: Bruce S. & other YJ people
The funny thing is I also think they are talking about the release spring
but ever since the 8.8 change it has never popped out like it did before the
change. Jim F.
I refuse to belong to any group that would have me as a member. "Groucho
Marx"
Member of the original dirty half dozen.
http://www.users.qwest.net/~jkflorence/index.htm/
http://www.rockrats.org/
-----Original Message-----
From: Roger Tomas [mailto:tomasr@a...]
Sent: Friday, February 15, 2002 10:11 AM
To: jetowle2000
Cc: az_vjc@yahoogroups.com
Subject: Re: [az_vjc] Re: Bruce S. & other YJ people
If they're talking about the spring in the e-brake release mechanism
(as I think they are), then your assertion would not be correct.
But it would be an effective excuse to convince the wife you need
the upgrade. ;-)
-Roger
jetowle2000 wrote:
>
> So after you installed the 8.8 you never had the problem again?
> I guess there's another reason for people to upgrade, "It's plain
> safer". :)
>
> --James
>
> --- In az_vjc@y..., "Hackle" <hackle@q...> wrote:
> > Thanks James do you think they would mind that I have an 8.8
> installed?
> > :) Good info when I had the 35 I remember my e-brake not holding at
> all
> > times. Jim F.
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
42888 From: AzVJC Website <azvjc@a...>
Date: Fri Feb 15, 2002 5:39pm
Subject: [FS] dana 30 & corp. 20
Price: $1000 OBO
Contact: chris @ (602)-973-6938
wide track dana 30 w/4:56 and lock right..set up for spring over or under....corp. 20 w/ 4:56 lincoln and superior axles...also set up for sring over or under...Sorry, but i WILL NOT SEPERATE these its both or none...these are still in the jeep...i will pull them when i see cash.
Chris Jean
42889 From: <hackle@q...>
Date: Fri Feb 15, 2002 5:42pm
Subject: New
1 of 8 photos
Great news! You've been invited to view Jim Florence's online photo album. It's easy to see Jim Florence's photos at Ofoto - just click on the link below to get started.
To view the album, click here. You may be asked to sign in or become an Ofoto member. It's free to join, and you'll get free shipping on your first order! As an Ofoto member, you can order prints of the photos that have been shared with you, plus frames, cards and more. Try us out!
If you can not see the links above, copy and paste the following URL directly into your browser: http://www.ofoto.com/I.jsp?m=69444083303&n;=1523333372
If you have any questions, please email the Ofoto Customer Service at service@ofoto.com or use our online form.
42890 From: <hackle@q...>
Date: Fri Feb 15, 2002 5:42pm
Subject: New
1 of 8 photos
Great news! You've been invited to view Jim Florence's online photo album. It's easy to see Jim Florence's photos at Ofoto - just click on the link below to get started.
To view the album, click here. You may be asked to sign in or become an Ofoto member. It's free to join, and you'll get free shipping on your first order! As an Ofoto member, you can order prints of the photos that have been shared with you, plus frames, cards and more. Try us out!
If you can not see the links above, copy and paste the following URL directly into your browser: http://www.ofoto.com/I.jsp?m=99444083303&n;=1689544897
If you have any questions, please email the Ofoto Customer Service at service@ofoto.com or use our online form.
42891 From: g_rob_williams <g_rob_williams@y...>
Date: Fri Feb 15, 2002 5:44pm
Subject: FR42 Circle K Meeting Place
How do you get to that Circle K meeting place for FR42? I went once
a long time ago and can't remember how to get there from Gilbert!! I
know I take the 101 up quite a ways and then take pima or scottsdale
road the rest of the way up?? Thanks!! -Rob
42892 From: <hackle@q...>
Date: Fri Feb 15, 2002 5:44pm
Subject: New Anti-wrap Bar
1 of 8 photos
Thanks to John at Hunter Offroad who built this great anti wrap bar form I can not wait until Sunday to test it out
To view the album, click here. You may be asked to sign in or become an Ofoto member. It's free to join, and you'll get free shipping on your first order! As an Ofoto member, you can order prints of the photos that have been shared with you, plus frames, cards and more. Try us out!
If you can not see the links above, copy and paste the following URL directly into your browser: http://www.ofoto.com/I.jsp?m=60864083303&n;=1152283835
If you have any questions, please email the Ofoto Customer Service at service@ofoto.com or use our online form.
42893 From: <hackle@q...>
Date: Fri Feb 15, 2002 5:45pm
Subject: New bar with no sign in sorry
1 of 8 photos
Great news! You've been invited to view Jim Florence's online photo album. It's easy to see Jim Florence's photos at Ofoto - just click on the link below to get started.
To view the album, click here. You may be asked to sign in or become an Ofoto member. It's free to join, and you'll get free shipping on your first order! As an Ofoto member, you can order prints of the photos that have been shared with you, plus frames, cards and more. Try us out!
If you can not see the links above, copy and paste the following URL directly into your browser: http://www.ofoto.com/I.jsp?m=86684083303&n;=518709666
If you have any questions, please email the Ofoto Customer Service at service@ofoto.com or use our online form.
42894 From: <aphrodsyak@a...>
Date: Fri Feb 15, 2002 0:45pm
Subject: need #
could someone help me out with a # for scott fabrication?? Me and sharky had it but it has dissapeared. please call me # 480 650 3887. or just shoot it back too I guess thats cool. thanks.
ERIC
42895 From: Scott Kruize <scottkruize@e...>
Date: Fri Feb 15, 2002 5:46pm
Subject: RE: avalanche quarter panels??
I didn't weigh them. You could email Avalanche and ask. There was no
noticeable loss in ride height on mine.
Scott
-----Original Message-----
From: Fred [mailto:fredtj@h...]
Sent: Friday, February 15, 2002 9:52 AM
To: Scott Kruize
Cc: vtboy73; az_vjc@yahoogroups.com
Subject: Re: [az_vjc] avalanche quarter panels??
Scott, roughly, what to they weigh?
Cheers,
Fred
Scott Kruize wrote:
>They are great. I've hit them hard and they do the job. I highly recommend
>them.
>
>Scott K
>
>-----Original Message-----
>From: vtboy73 [mailto:vtboy73@y...]
>Sent: Friday, February 15, 2002 12:52 AM
>To: az_vjc@yahoogroups.com
>Subject: [az_vjc] avalanche quarter panels??
>
>
>Hey group,
>Does anyone have the rock crusher corner gaurds from avalanche?I am
>in the market for some new protection and to cover up some whoops
>were did that rock come from.just would like a comsumer report before
>I drop the $300 or so on them.
>Thanks,
>Scott 92 yj 4cyl
>
>
>
>
>Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
>
>
>
>
>Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
42896 From: Scott Kruize <scottkruize@e...>
Date: Fri Feb 15, 2002 5:49pm
Subject: RE: Re: in stock at Harbor Freight
Joe,
I beg to differ. The u joint tool is a whole lot easier to use than a vise.
Done it both ways and never would go back to the vise.
Scott
-----Original Message-----
From: Joe West [mailto:joew@a...]
Sent: Friday, February 15, 2002 5:31 PM
To: 'dthorton_2000'; az_vjc@yahoogroups.com
Subject: RE: [az_vjc] Re: in stock at Harbor Freight
Dan,
I talked to the president of the "U Joint Tool" company you described and
told him that it would be tough to sell his device at even HALF of his
asking price... that the market for such a tool wouldn't bear what he is
trying to charge. I believe the best price I could get out of them was
about $220 or so... still more than TWICE what I'd be willing to pay.
I have the Harbor Freight tool and while it is extremely inexpensive and
very rough around the edges; it gets the job done... although not nearly as
well as the vice I have mounted to my rear bumper <grin>.
I'd highly recommend the Harbor Freight tool... you'll love it and it even
works on ball joints!
Joe West
> -----Original Message-----
> From: dthorton_2000 [mailto:dt_horton@h...]
> Sent: Friday, February 15, 2002 2:51 PM
> To: az_vjc@yahoogroups.com
> Subject: [az_vjc] Re: in stock at Harbor Freight
>
>
> Hey Stu,
> How does that compare to the $329 (are they serious?) handy-
> dandy "U-Joint Tool"
> http://www.ujointtool.com/page3.html
> They review it here on www.rockcrawler.com
> http://www.rockcrawler.com/techreports/ujointtool/index.asp
> Thanks,
> Dan Horton
>
>
> --- In az_vjc@y..., "Stu Olson" <solson8@q...> wrote:
> > The "3-in-1" u-joint tool that normally goes for $39.99 is in
> stock at the
> > 35th Ave & Bethany Home Road store. I was over there a bit
> ago and they had
> > a half dozen or more sitting on the shelf. These seem to be
> commonly out of
> > stock so if you've been looking for one, now is your chance.
> >
> > If you don't have one of these for doing u-joint replacements,
> you are
> > REALLY making it more difficult for yourself, IMO.
> >
> > Stu
> >
> > Stu Olson
> > www.stu-offroad.com
>
>
>
>
> Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
>
>
>
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
42897 From: Joe W <arizonajeep@c...>
Date: Fri Feb 15, 2002 6:04pm
Subject: RE: Re: in stock at Harbor Freight
Scott,
Still having nightmares of replacing the u-joint in your CV? <grin>
That sure was a full night full-o-fun.
Joe
> -----Original Message-----
> From: Scott Kruize [mailto:scottkruize@e...]
> Sent: Friday, February 15, 2002 6:49 PM
> To: joew@a...; 'dthorton_2000'; az_vjc@yahoogroups.com
> Subject: RE: [az_vjc] Re: in stock at Harbor Freight
>
>
> Joe,
>
> I beg to differ. The u joint tool is a whole lot easier to
> use than a vise.
> Done it both ways and never would go back to the vise.
>
> Scott
>
> -----Original Message-----
> From: Joe West [mailto:joew@a...]
> Sent: Friday, February 15, 2002 5:31 PM
> To: 'dthorton_2000'; az_vjc@yahoogroups.com
> Subject: RE: [az_vjc] Re: in stock at Harbor Freight
>
>
> Dan,
>
> I talked to the president of the "U Joint Tool" company you
> described and
> told him that it would be tough to sell his device at even HALF of his
> asking price... that the market for such a tool wouldn't bear
> what he is
> trying to charge. I believe the best price I could get out
> of them was
> about $220 or so... still more than TWICE what I'd be willing to pay.
>
> I have the Harbor Freight tool and while it is extremely
> inexpensive and
> very rough around the edges; it gets the job done... although
> not nearly as
> well as the vice I have mounted to my rear bumper <grin>.
>
> I'd highly recommend the Harbor Freight tool... you'll love
> it and it even
> works on ball joints!
>
> Joe West
>
> > -----Original Message-----
> > From: dthorton_2000 [mailto:dt_horton@h...]
> > Sent: Friday, February 15, 2002 2:51 PM
> > To: az_vjc@yahoogroups.com
> > Subject: [az_vjc] Re: in stock at Harbor Freight
> >
> >
> > Hey Stu,
> > How does that compare to the $329 (are they serious?) handy-
> > dandy "U-Joint Tool"
> > http://www.ujointtool.com/page3.html
> > They review it here on www.rockcrawler.com
> > http://www.rockcrawler.com/techreports/ujointtool/index.asp
> > Thanks,
> > Dan Horton
> >
> >
> > --- In az_vjc@y..., "Stu Olson" <solson8@q...> wrote:
> > > The "3-in-1" u-joint tool that normally goes for $39.99 is in
> > stock at the
> > > 35th Ave & Bethany Home Road store. I was over there a bit
> > ago and they had
> > > a half dozen or more sitting on the shelf. These seem to be
> > commonly out of
> > > stock so if you've been looking for one, now is your chance.
> > >
> > > If you don't have one of these for doing u-joint replacements,
> > you are
> > > REALLY making it more difficult for yourself, IMO.
> > >
> > > Stu
> > >
> > > Stu Olson
> > > www.stu-offroad.com
> >
> >
> >
> >
> > Your use of Yahoo! Groups is subject to
> > http://docs.yahoo.com/info/terms/
> >
> >
> >
>
>
>
>
> Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
>
>
>
>
>
>
>
> Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
>
>
42898 From: Joe W <arizonajeep@c...>
Date: Fri Feb 15, 2002 6:11pm
Subject: Change your spark plugs people! 9mpg to 12mpg Overnight!
Evening,
After 37,000 miles on my original factory plugs... I changed them last week.
Plug gaps were worn from the nominal .035" to .067" so I replaced them with
new spark plugs.
Net results... 33% gain in fuel economy from replacing them.
Suggestion; Chrysler doesn't use 100k mile plugs... If you have over 25k on
the original set, I'd replace them.
New plugs are Bosch Platinum... love em... and please; don't buy Split-Fire
plugs unless you like throwing money away.
Kind Regards,
Joe West
42899 From: Joe W <arizonajeep@c...>
Date: Fri Feb 15, 2002 6:12pm
Subject: RE: avalanche quarter panels??
Roughly... the weight of a 1964 Blue-Bird School bus full of 9th graders.
Does this help?
Joe West
> -----Original Message-----
> From: Scott Kruize [mailto:scottkruize@e...]
> Sent: Friday, February 15, 2002 6:47 PM
> To: Fred
> Cc: vtboy73; az_vjc@yahoogroups.com
> Subject: RE: [az_vjc] avalanche quarter panels??
>
>
> I didn't weigh them. You could email Avalanche and ask. There was no
> noticeable loss in ride height on mine.
>
> Scott
>
> -----Original Message-----
> From: Fred [mailto:fredtj@h...]
> Sent: Friday, February 15, 2002 9:52 AM
> To: Scott Kruize
> Cc: vtboy73; az_vjc@yahoogroups.com
> Subject: Re: [az_vjc] avalanche quarter panels??
>
>
> Scott, roughly, what to they weigh?
>
> Cheers,
> Fred
>
>
> Scott Kruize wrote:
>
> >They are great. I've hit them hard and they do the job. I
> highly recommend
> >them.
> >
> >Scott K
> >
> >-----Original Message-----
> >From: vtboy73 [mailto:vtboy73@y...]
> >Sent: Friday, February 15, 2002 12:52 AM
> >To: az_vjc@yahoogroups.com
> >Subject: [az_vjc] avalanche quarter panels??
> >
> >
> >Hey group,
> >Does anyone have the rock crusher corner gaurds from avalanche?I am
> >in the market for some new protection and to cover up some whoops
> >were did that rock come from.just would like a comsumer report before
> >I drop the $300 or so on them.
> >Thanks,
> >Scott 92 yj 4cyl
> >
> >
> >
> >
> >Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
>
>
>
>
>
>
>
>Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
42900 From: bruce stropp <jeep4offrd@h...>
Date: Fri Feb 15, 2002 6:23pm
Subject: HELP directions to bartlett lake please
Were planning on going on the run at fr-42 tomorrow but have no idea how to
get to the parking lot at bartlett lake. Can anyone help us out with
directions. Were comming from Tempe.
Thanks, Bruce
__________________________________________________ _______________
Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp.
42901 From: J & P Visic <jpvisic@n...>
Date: Fri Feb 15, 2002 6:40pm
Subject: (Help) Advice on Shocks
I need to replace the shocks on my 84 CJ7 with 2 and 1/2" Rancho lift. Any advice on recommended replacements? Will they be an off-the-shelf item at say Auto Zone or need to come from 4X4 shop? I'm looking for lower end stuff - need to spend money on other upgrades for now. Plan on doing it tomorrow so advice would be appreciated. Thanks
John Visic
42902 From: Tom Patterson <trpsys@q...>
Date: Fri Feb 15, 2002 6:36pm
Subject: Re: need #
Business 623-742-7217 Mobile 602-463-4217
TomP
aphrodsyak@aol.com wrote:
could someone help me out with a # for scott fabrication?? Me and sharky had it but it has dissapeared. please call me # 480 650 3887. or just shoot it back too I guess thats cool. thanks.
ERIC
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
42903 From: Joe W <arizonajeep@c...>
Date: Fri Feb 15, 2002 6:15pm
Subject: RE: need #
That would be "Sharky and I"...
Hi Eric! By the way... Tom's doing a great job so it will soon be time for us to talk about the home refinance!
Joe
Me and sharky had it but it has dissapeared.
ERIC
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
42904 From: Stu Olson <solson8@q...>
Date: Fri Feb 15, 2002 6:48pm
Subject: RE: Change your spark plugs people! 9mpg to 12mpg Overnight!
Joe,
Thanks for the heads up. I'm at 40K so I guess I am due too.
I had given them no thought since the Jeep starts and runs so well. I'll
have to put a new set in soon and see if I can go from 3 to 4 MPG. ;) (you
did say a 33% increase, right?)
Catch ya later.........Stu
Stu Olson
www.stu-offroad.com
-----Original Message-----
From: Joe W [mailto:arizonajeep@c...]
Sent: Friday, February 15, 2002 7:11 PM
To: Azvjc (E-mail)
Subject: [az_vjc] Change your spark plugs people! 9mpg to 12mpg
Overnight!
Evening,
After 37,000 miles on my original factory plugs... I changed them last week.
Plug gaps were worn from the nominal .035" to .067" so I replaced them with
new spark plugs.
Net results... 33% gain in fuel economy from replacing them.
Suggestion; Chrysler doesn't use 100k mile plugs... If you have over 25k on
the original set, I'd replace them.
New plugs are Bosch Platinum... love em... and please; don't buy Split-Fire
plugs unless you like throwing money away.
Kind Regards,
Joe West
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
42905 From: Fred <fredtj@h...>
Date: Fri Feb 15, 2002 6:58pm
Subject: Re: Change your spark plugs people! 9mpg to 12mpg Overnight!
There has been some suggestions regarding not using Platinum plugs. I
haven't followed the discussions, so I don't know that the cons are/were. I
simply use the recommended Champion plugs, less than $1.00 each and change
'em every 20,000 miles. One of the best things that you can do. Cheap and
quick.
Cheers,
Fred
----- Original Message -----
From: "Joe W" <arizonajeep@c...>
To: "Azvjc (E-mail)" <az_vjc@yahoogroups.com>
Sent: Friday, February 15, 2002 7:11 PM
Subject: [az_vjc] Change your spark plugs people! 9mpg to 12mpg Overnight!
> Evening,
>
>
> After 37,000 miles on my original factory plugs... I changed them last
week.
> Plug gaps were worn from the nominal .035" to .067" so I replaced them
with
> new spark plugs.
>
> Net results... 33% gain in fuel economy from replacing them.
>
> Suggestion; Chrysler doesn't use 100k mile plugs... If you have over 25k
on
> the original set, I'd replace them.
>
> New plugs are Bosch Platinum... love em... and please; don't buy
Split-Fire
> plugs unless you like throwing money away.
>
> Kind Regards,
>
> Joe West
>
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
42906 From: Bill Witt <k7ant@t...>
Date: Fri Feb 15, 2002 7:02pm
Subject: Re: Fw: Rock Crawl Cancelled?
"Part of the reason was we did not receive the support from our local rock crawlers to make this event a spectacular event. " as Quoted by Sandy McCullen
Can someone explain this quote for me?
Bill W
K7ANT
97 TJ with a few mods.
http://k7ant.rockcrawler.com/
Up on the Mogollon Rim in God and 4 wheeler's country.
----- Original Message -----
From: Mike
To: AZ Virtual Jeep Club ; Arizona Dust Devils
Sent: Wednesday, February 13, 2002 3:53 PM
Subject: [az_vjc] Fw: Rock Crawl Cancelled?
This is the reply I got from Sandee M. of ASA Four Wheel Drive Clubs. To bad I was looking forward to spectating.
Mike Wixom
85 CJ-7
----- Original Message -----
From: Sandee McCullen
To: Mike
Sent: Wednesday, February 13, 2002 3:08 PM
Subject: RE: Rock Crawl Cancelled?
Boy, the grapevine is FAST............... yes, the event as a "competition" has been cancelled due to BLM mucking around getting the permit approved and putting "stipulations" in place that were above the line etc etc. Part of the reason was we did not receive the support from our local rock crawlers to make this event a spectacular event.
The Arizona Rock Crawlers are planning a campout this weekend and will be doing "rock crawling" for fun and exhibition.......... EVERYONE is invited to join in.
Sandee
-----Original Message-----
From: Mike [mailto:h8pvmnt@hotmail.com]
Sent: Wednesday, February 13, 2002 9:30 AM
To: Sandee McCullen
Subject: Rock Crawl Cancelled?
Sandee,
I just got an e-mail saying the rock crawl had been cancelled is this true?
Mike Wixom
85 CJ-7
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
42907 From: Craig Micek <micekc@e...>
Date: Fri Feb 15, 2002 7:03pm
Subject: Re: Fw: Rock Crawl Cancelled?
That was the impression I had. That it was for the hardcore, ARCA style rigs and competitors.
Who would have entered if they knew there was a class for daily drivers and not a high probability of rollovers, but something that would test your driving skills? Anyone?
----- Original Message -----
From: ebnhils
To: Craig Micek
Sent: Friday, February 15, 2002 4:53 PM
Subject: Re: [az_vjc] Fw: Rock Crawl Cancelled?
I was told that there were only 15 entries and they needed 40 just to pay for the permits, etc. Apparently, some people were worried that it was going to be too difficult and only for the hard core rock crawlers.
----- Original Message -----
From: Craig Micek
To: AZ Virtual Jeep Club ; Arizona Dust Devils ; Mike
Sent: Wednesday, February 13, 2002 9:36 PM
Subject: Re: [az_vjc] Fw: Rock Crawl Cancelled?
I was looking forward to this also. Sandy said not enough support, any idea what she means? Was it not enough entries? Or did they need a letter campaign to the BLM? I was not aware of any appeal for assistance.
Craig Micek
----- Original Message -----
From: Mike
To: AZ Virtual Jeep Club ; Arizona Dust Devils
Sent: Wednesday, February 13, 2002 3:53 PM
Subject: [az_vjc] Fw: Rock Crawl Cancelled?
This is the reply I got from Sandee M. of ASA Four Wheel Drive Clubs. To bad I was looking forward to spectating.
Mike Wixom
85 CJ-7
----- Original Message -----
From: Sandee McCullen
To: Mike
Sent: Wednesday, February 13, 2002 3:08 PM
Subject: RE: Rock Crawl Cancelled?
Boy, the grapevine is FAST............... yes, the event as a "competition" has been cancelled due to BLM mucking around getting the permit approved and putting "stipulations" in place that were above the line etc etc. Part of the reason was we did not receive the support from our local rock crawlers to make this event a spectacular event.
The Arizona Rock Crawlers are planning a campout this weekend and will be doing "rock crawling" for fun and exhibition.......... EVERYONE is invited to join in.
Sandee
-----Original Message-----
From: Mike [mailto:h8pvmnt@hotmail.com]
Sent: Wednesday, February 13, 2002 9:30 AM
To: Sandee McCullen
Subject: Rock Crawl Cancelled?
Sandee,
I just got an e-mail saying the rock crawl had been cancelled is this true?
Mike Wixom
85 CJ-7
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
42908 From: Halverson <byrnec@q...>
Date: Fri Feb 15, 2002 7:11pm
Subject: Re: New bar with no sign in sorry
Boy-He does nice work, doesn't he?
John
----- Original Message -----
From: hackle@qwest.net
To: az_vjc@yahoogroups.com
Sent: Friday, February 15, 2002 6:45 PM
Subject: [az_vjc] New bar with no sign in sorry
1 of 8 photos
Great news! You've been invited to view Jim Florence's online photo album. It's easy to see Jim Florence's photos at Ofoto - just click on the link below to get started.
To view the album, click here. You may be asked to sign in or become an Ofoto member. It's free to join, and you'll get free shipping on your first order! As an Ofoto member, you can order prints of the photos that have been shared with you, plus frames, cards and more. Try us out!
If you can not see the links above, copy and paste the following URL directly into your browser: http://www.ofoto.com/I.jsp?m=86684083303&n=518709666
If you have any questions, please email the Ofoto Customer Service at service@ofoto.com or use our online form.
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
42909 From: Halverson <byrnec@q...>
Date: Fri Feb 15, 2002 7:15pm
Subject: Re: HELP directions to bartlett lake please
Bruce-- Take the 101 north to Pima Rd. Follow it north until you see the
Bartlett Lake turnoff, then turn east and follow the signs.
John
----- Original Message -----
From: "bruce stropp" <jeep4offrd@h...>
To: <az_vjc@yahoogroups.com>
Sent: Friday, February 15, 2002 7:23 PM
Subject: [az_vjc] HELP directions to bartlett lake please
> Were planning on going on the run at fr-42 tomorrow but have no idea how
to
> get to the parking lot at bartlett lake. Can anyone help us out with
> directions. Were comming from Tempe.
> Thanks, Bruce
>
>
>
> __________________________________________________ _______________
> Get your FREE download of MSN Explorer at
http://explorer.msn.com/intl.asp.
>
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
42885 From: Gary MacLaren <gmaclaren@c...>
Date: Fri Feb 15, 2002 4:47pm
Subject: Fw: ACTION ALERT
-----Original Message-----
From: Joan Beck <fourby@citlink.net>
To: Undisclosed-Recipient:;
Date: Friday, February 15, 2002 4:15 PM
Subject: Fw: ACTION ALERT
----- Original Message -----
From: Scott Riebel
Sent: Friday, February 15, 2002 1:36 PM
Subject: ACTION ALERT
ACTION ALERT
DEPARTMENT OF INTERIOR
appears to be trying to avoid comments from the people FOR the
2002-2007 DOI Strategic Plan
In December 2001 and January 2002 they had 6 meeting, 4 in DC, 1 in Albuquerque and 1 in Denver reference the Plan. Attendance was by invitation only and the people invited were the environmental green groups and the animal rights groups. At the last minute, like 3-4 days before the meetings, they got around to inviting a very few from our side.
NOW they have published a notice in the February 14, 2002 Federal Register. The Department of the Interior has begun the process of
revising its strategic plan that covers the period of FY 2000-2005. The
process for developing the new plan will place a major emphasis on end-
results to be achieved by the Department and how these desired outcomes
can be effectively measured to assess our performance. COMMENTS ARE DUE MARCH 1, 2002. 2 WEEKS TIME
The document is available on the DOI web site http://www.doi.gov/gpra/. They are pdf files and there is one for each agency of DOI. It is not user friendly.
Suggested action: Immediately FAX a letter to the address below.
1) request a 90 to 120 days extension to the commend period.
2) request a copy of the plan be mailed to you.
3) request a meeting in your state with appropriate notice in the Federal Register and local newspapers.
4) CC your request to your federal, state and local elected officials. Most if not all of them probably do not know about this action.
5) Provide this information to as many people as you can.
E-mail: doistratplan@usgs.gov.
Fax: (202) 208-2619.
Mail: U.S. Department of the Interior, Office of the Secretary, Office
of Planning and Performance Management, 1849 C Street, NW B MS 5258, Washington, DC 20240.
FOR FURTHER INFORMATION: LeRon Bielak (202) 208-1818
FROM THE FEDERAL REGISTER.
SUPPLEMENTARY INFORMATION: The current plan, nine separate bureau and office plans and a Departmental Overview, will be replaced with a single, integrated plan.
Contrary to past practices of first publishing a draft plan for
comment, the DOI is soliciting stakeholder views through a series of
meetings and written comments on appropriate outcomes and strategies
that the Department should achieve in six primary mission areas. These
areas are:
1. Preservation of Natural and Cultural Resources.
2. Restoration of Natural and Cultural Resources.
3. Recreation Uses on Public Lands.
4. Use of Natural Resources (e.g., energy and non-energy minerals,
timber, water, grazing land, etc.).
5. Meeting our Trust Responsibilities to Native Americans, Alaskan
Natives, and Island Communities.
6. Role of Science in Meeting the Missions of the Department.
Information obtained from internal and external stakeholders will
be used to develop a revised strategic plan that is consistent with the
missions of the Department and the Government Performance and Results Act (GPRA) requirements.
Scott Riebel
Director of Environmental Affairs
United Four Wheel Drive Associations
www.ufwda.org
----------------------------------------------------------------------------------------------------
NOTE: In accordance with Title 17 U.S.C. section 107, any copyrighted material herein is distributed without profit or payment to those who have expressed a prior interest in receiving this information for non-profit research and educational purposes only. For more information go to: http://www.law.cornell.edu/uscode/17/107.shtml
--------------------------------------------------------------------------------
ADVERTISEMENT
42886 From: AzVJC Website <azvjc@a...>
Date: Fri Feb 15, 2002 4:47pm
Subject: [FS] 3" Teraflex TJ Coils
Price: $160
Contact: 480-694-3983
Front and rear Teraflex 3" TJ coils. 1.5 years old, good shape, although some of the powdercoating has flaked off. Getting taller coils, so don't need them anymore. Taking them off the jeep tomorrow morning.
Dan Coley
42887 From: Hackle <hackle@q...>
Date: Fri Feb 15, 2002 5:37pm
Subject: RE: Re: Bruce S. & other YJ people
The funny thing is I also think they are talking about the release spring
but ever since the 8.8 change it has never popped out like it did before the
change. Jim F.
I refuse to belong to any group that would have me as a member. "Groucho
Marx"
Member of the original dirty half dozen.
http://www.users.qwest.net/~jkflorence/index.htm/
http://www.rockrats.org/
-----Original Message-----
From: Roger Tomas [mailto:tomasr@a...]
Sent: Friday, February 15, 2002 10:11 AM
To: jetowle2000
Cc: az_vjc@yahoogroups.com
Subject: Re: [az_vjc] Re: Bruce S. & other YJ people
If they're talking about the spring in the e-brake release mechanism
(as I think they are), then your assertion would not be correct.
But it would be an effective excuse to convince the wife you need
the upgrade. ;-)
-Roger
jetowle2000 wrote:
>
> So after you installed the 8.8 you never had the problem again?
> I guess there's another reason for people to upgrade, "It's plain
> safer". :)
>
> --James
>
> --- In az_vjc@y..., "Hackle" <hackle@q...> wrote:
> > Thanks James do you think they would mind that I have an 8.8
> installed?
> > :) Good info when I had the 35 I remember my e-brake not holding at
> all
> > times. Jim F.
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
42888 From: AzVJC Website <azvjc@a...>
Date: Fri Feb 15, 2002 5:39pm
Subject: [FS] dana 30 & corp. 20
Price: $1000 OBO
Contact: chris @ (602)-973-6938
wide track dana 30 w/4:56 and lock right..set up for spring over or under....corp. 20 w/ 4:56 lincoln and superior axles...also set up for sring over or under...Sorry, but i WILL NOT SEPERATE these its both or none...these are still in the jeep...i will pull them when i see cash.
Chris Jean
42889 From: <hackle@q...>
Date: Fri Feb 15, 2002 5:42pm
Subject: New
1 of 8 photos
Great news! You've been invited to view Jim Florence's online photo album. It's easy to see Jim Florence's photos at Ofoto - just click on the link below to get started.
To view the album, click here. You may be asked to sign in or become an Ofoto member. It's free to join, and you'll get free shipping on your first order! As an Ofoto member, you can order prints of the photos that have been shared with you, plus frames, cards and more. Try us out!
If you can not see the links above, copy and paste the following URL directly into your browser: http://www.ofoto.com/I.jsp?m=69444083303&n;=1523333372
If you have any questions, please email the Ofoto Customer Service at service@ofoto.com or use our online form.
42890 From: <hackle@q...>
Date: Fri Feb 15, 2002 5:42pm
Subject: New
1 of 8 photos
Great news! You've been invited to view Jim Florence's online photo album. It's easy to see Jim Florence's photos at Ofoto - just click on the link below to get started.
To view the album, click here. You may be asked to sign in or become an Ofoto member. It's free to join, and you'll get free shipping on your first order! As an Ofoto member, you can order prints of the photos that have been shared with you, plus frames, cards and more. Try us out!
If you can not see the links above, copy and paste the following URL directly into your browser: http://www.ofoto.com/I.jsp?m=99444083303&n;=1689544897
If you have any questions, please email the Ofoto Customer Service at service@ofoto.com or use our online form.
42891 From: g_rob_williams <g_rob_williams@y...>
Date: Fri Feb 15, 2002 5:44pm
Subject: FR42 Circle K Meeting Place
How do you get to that Circle K meeting place for FR42? I went once
a long time ago and can't remember how to get there from Gilbert!! I
know I take the 101 up quite a ways and then take pima or scottsdale
road the rest of the way up?? Thanks!! -Rob
42892 From: <hackle@q...>
Date: Fri Feb 15, 2002 5:44pm
Subject: New Anti-wrap Bar
1 of 8 photos
Thanks to John at Hunter Offroad who built this great anti wrap bar form I can not wait until Sunday to test it out
To view the album, click here. You may be asked to sign in or become an Ofoto member. It's free to join, and you'll get free shipping on your first order! As an Ofoto member, you can order prints of the photos that have been shared with you, plus frames, cards and more. Try us out!
If you can not see the links above, copy and paste the following URL directly into your browser: http://www.ofoto.com/I.jsp?m=60864083303&n;=1152283835
If you have any questions, please email the Ofoto Customer Service at service@ofoto.com or use our online form.
42893 From: <hackle@q...>
Date: Fri Feb 15, 2002 5:45pm
Subject: New bar with no sign in sorry
1 of 8 photos
Great news! You've been invited to view Jim Florence's online photo album. It's easy to see Jim Florence's photos at Ofoto - just click on the link below to get started.
To view the album, click here. You may be asked to sign in or become an Ofoto member. It's free to join, and you'll get free shipping on your first order! As an Ofoto member, you can order prints of the photos that have been shared with you, plus frames, cards and more. Try us out!
If you can not see the links above, copy and paste the following URL directly into your browser: http://www.ofoto.com/I.jsp?m=86684083303&n;=518709666
If you have any questions, please email the Ofoto Customer Service at service@ofoto.com or use our online form.
42894 From: <aphrodsyak@a...>
Date: Fri Feb 15, 2002 0:45pm
Subject: need #
could someone help me out with a # for scott fabrication?? Me and sharky had it but it has dissapeared. please call me # 480 650 3887. or just shoot it back too I guess thats cool. thanks.
ERIC
42895 From: Scott Kruize <scottkruize@e...>
Date: Fri Feb 15, 2002 5:46pm
Subject: RE: avalanche quarter panels??
I didn't weigh them. You could email Avalanche and ask. There was no
noticeable loss in ride height on mine.
Scott
-----Original Message-----
From: Fred [mailto:fredtj@h...]
Sent: Friday, February 15, 2002 9:52 AM
To: Scott Kruize
Cc: vtboy73; az_vjc@yahoogroups.com
Subject: Re: [az_vjc] avalanche quarter panels??
Scott, roughly, what to they weigh?
Cheers,
Fred
Scott Kruize wrote:
>They are great. I've hit them hard and they do the job. I highly recommend
>them.
>
>Scott K
>
>-----Original Message-----
>From: vtboy73 [mailto:vtboy73@y...]
>Sent: Friday, February 15, 2002 12:52 AM
>To: az_vjc@yahoogroups.com
>Subject: [az_vjc] avalanche quarter panels??
>
>
>Hey group,
>Does anyone have the rock crusher corner gaurds from avalanche?I am
>in the market for some new protection and to cover up some whoops
>were did that rock come from.just would like a comsumer report before
>I drop the $300 or so on them.
>Thanks,
>Scott 92 yj 4cyl
>
>
>
>
>Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
>
>
>
>
>Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
42896 From: Scott Kruize <scottkruize@e...>
Date: Fri Feb 15, 2002 5:49pm
Subject: RE: Re: in stock at Harbor Freight
Joe,
I beg to differ. The u joint tool is a whole lot easier to use than a vise.
Done it both ways and never would go back to the vise.
Scott
-----Original Message-----
From: Joe West [mailto:joew@a...]
Sent: Friday, February 15, 2002 5:31 PM
To: 'dthorton_2000'; az_vjc@yahoogroups.com
Subject: RE: [az_vjc] Re: in stock at Harbor Freight
Dan,
I talked to the president of the "U Joint Tool" company you described and
told him that it would be tough to sell his device at even HALF of his
asking price... that the market for such a tool wouldn't bear what he is
trying to charge. I believe the best price I could get out of them was
about $220 or so... still more than TWICE what I'd be willing to pay.
I have the Harbor Freight tool and while it is extremely inexpensive and
very rough around the edges; it gets the job done... although not nearly as
well as the vice I have mounted to my rear bumper <grin>.
I'd highly recommend the Harbor Freight tool... you'll love it and it even
works on ball joints!
Joe West
> -----Original Message-----
> From: dthorton_2000 [mailto:dt_horton@h...]
> Sent: Friday, February 15, 2002 2:51 PM
> To: az_vjc@yahoogroups.com
> Subject: [az_vjc] Re: in stock at Harbor Freight
>
>
> Hey Stu,
> How does that compare to the $329 (are they serious?) handy-
> dandy "U-Joint Tool"
> http://www.ujointtool.com/page3.html
> They review it here on www.rockcrawler.com
> http://www.rockcrawler.com/techreports/ujointtool/index.asp
> Thanks,
> Dan Horton
>
>
> --- In az_vjc@y..., "Stu Olson" <solson8@q...> wrote:
> > The "3-in-1" u-joint tool that normally goes for $39.99 is in
> stock at the
> > 35th Ave & Bethany Home Road store. I was over there a bit
> ago and they had
> > a half dozen or more sitting on the shelf. These seem to be
> commonly out of
> > stock so if you've been looking for one, now is your chance.
> >
> > If you don't have one of these for doing u-joint replacements,
> you are
> > REALLY making it more difficult for yourself, IMO.
> >
> > Stu
> >
> > Stu Olson
> > www.stu-offroad.com
>
>
>
>
> Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
>
>
>
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
42897 From: Joe W <arizonajeep@c...>
Date: Fri Feb 15, 2002 6:04pm
Subject: RE: Re: in stock at Harbor Freight
Scott,
Still having nightmares of replacing the u-joint in your CV? <grin>
That sure was a full night full-o-fun.
Joe
> -----Original Message-----
> From: Scott Kruize [mailto:scottkruize@e...]
> Sent: Friday, February 15, 2002 6:49 PM
> To: joew@a...; 'dthorton_2000'; az_vjc@yahoogroups.com
> Subject: RE: [az_vjc] Re: in stock at Harbor Freight
>
>
> Joe,
>
> I beg to differ. The u joint tool is a whole lot easier to
> use than a vise.
> Done it both ways and never would go back to the vise.
>
> Scott
>
> -----Original Message-----
> From: Joe West [mailto:joew@a...]
> Sent: Friday, February 15, 2002 5:31 PM
> To: 'dthorton_2000'; az_vjc@yahoogroups.com
> Subject: RE: [az_vjc] Re: in stock at Harbor Freight
>
>
> Dan,
>
> I talked to the president of the "U Joint Tool" company you
> described and
> told him that it would be tough to sell his device at even HALF of his
> asking price... that the market for such a tool wouldn't bear
> what he is
> trying to charge. I believe the best price I could get out
> of them was
> about $220 or so... still more than TWICE what I'd be willing to pay.
>
> I have the Harbor Freight tool and while it is extremely
> inexpensive and
> very rough around the edges; it gets the job done... although
> not nearly as
> well as the vice I have mounted to my rear bumper <grin>.
>
> I'd highly recommend the Harbor Freight tool... you'll love
> it and it even
> works on ball joints!
>
> Joe West
>
> > -----Original Message-----
> > From: dthorton_2000 [mailto:dt_horton@h...]
> > Sent: Friday, February 15, 2002 2:51 PM
> > To: az_vjc@yahoogroups.com
> > Subject: [az_vjc] Re: in stock at Harbor Freight
> >
> >
> > Hey Stu,
> > How does that compare to the $329 (are they serious?) handy-
> > dandy "U-Joint Tool"
> > http://www.ujointtool.com/page3.html
> > They review it here on www.rockcrawler.com
> > http://www.rockcrawler.com/techreports/ujointtool/index.asp
> > Thanks,
> > Dan Horton
> >
> >
> > --- In az_vjc@y..., "Stu Olson" <solson8@q...> wrote:
> > > The "3-in-1" u-joint tool that normally goes for $39.99 is in
> > stock at the
> > > 35th Ave & Bethany Home Road store. I was over there a bit
> > ago and they had
> > > a half dozen or more sitting on the shelf. These seem to be
> > commonly out of
> > > stock so if you've been looking for one, now is your chance.
> > >
> > > If you don't have one of these for doing u-joint replacements,
> > you are
> > > REALLY making it more difficult for yourself, IMO.
> > >
> > > Stu
> > >
> > > Stu Olson
> > > www.stu-offroad.com
> >
> >
> >
> >
> > Your use of Yahoo! Groups is subject to
> > http://docs.yahoo.com/info/terms/
> >
> >
> >
>
>
>
>
> Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
>
>
>
>
>
>
>
> Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
>
>
42898 From: Joe W <arizonajeep@c...>
Date: Fri Feb 15, 2002 6:11pm
Subject: Change your spark plugs people! 9mpg to 12mpg Overnight!
Evening,
After 37,000 miles on my original factory plugs... I changed them last week.
Plug gaps were worn from the nominal .035" to .067" so I replaced them with
new spark plugs.
Net results... 33% gain in fuel economy from replacing them.
Suggestion; Chrysler doesn't use 100k mile plugs... If you have over 25k on
the original set, I'd replace them.
New plugs are Bosch Platinum... love em... and please; don't buy Split-Fire
plugs unless you like throwing money away.
Kind Regards,
Joe West
42899 From: Joe W <arizonajeep@c...>
Date: Fri Feb 15, 2002 6:12pm
Subject: RE: avalanche quarter panels??
Roughly... the weight of a 1964 Blue-Bird School bus full of 9th graders.
Does this help?
Joe West
> -----Original Message-----
> From: Scott Kruize [mailto:scottkruize@e...]
> Sent: Friday, February 15, 2002 6:47 PM
> To: Fred
> Cc: vtboy73; az_vjc@yahoogroups.com
> Subject: RE: [az_vjc] avalanche quarter panels??
>
>
> I didn't weigh them. You could email Avalanche and ask. There was no
> noticeable loss in ride height on mine.
>
> Scott
>
> -----Original Message-----
> From: Fred [mailto:fredtj@h...]
> Sent: Friday, February 15, 2002 9:52 AM
> To: Scott Kruize
> Cc: vtboy73; az_vjc@yahoogroups.com
> Subject: Re: [az_vjc] avalanche quarter panels??
>
>
> Scott, roughly, what to they weigh?
>
> Cheers,
> Fred
>
>
> Scott Kruize wrote:
>
> >They are great. I've hit them hard and they do the job. I
> highly recommend
> >them.
> >
> >Scott K
> >
> >-----Original Message-----
> >From: vtboy73 [mailto:vtboy73@y...]
> >Sent: Friday, February 15, 2002 12:52 AM
> >To: az_vjc@yahoogroups.com
> >Subject: [az_vjc] avalanche quarter panels??
> >
> >
> >Hey group,
> >Does anyone have the rock crusher corner gaurds from avalanche?I am
> >in the market for some new protection and to cover up some whoops
> >were did that rock come from.just would like a comsumer report before
> >I drop the $300 or so on them.
> >Thanks,
> >Scott 92 yj 4cyl
> >
> >
> >
> >
> >Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
>
>
>
>
>
>
>
>Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
42900 From: bruce stropp <jeep4offrd@h...>
Date: Fri Feb 15, 2002 6:23pm
Subject: HELP directions to bartlett lake please
Were planning on going on the run at fr-42 tomorrow but have no idea how to
get to the parking lot at bartlett lake. Can anyone help us out with
directions. Were comming from Tempe.
Thanks, Bruce
__________________________________________________ _______________
Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp.
42901 From: J & P Visic <jpvisic@n...>
Date: Fri Feb 15, 2002 6:40pm
Subject: (Help) Advice on Shocks
I need to replace the shocks on my 84 CJ7 with 2 and 1/2" Rancho lift. Any advice on recommended replacements? Will they be an off-the-shelf item at say Auto Zone or need to come from 4X4 shop? I'm looking for lower end stuff - need to spend money on other upgrades for now. Plan on doing it tomorrow so advice would be appreciated. Thanks
John Visic
42902 From: Tom Patterson <trpsys@q...>
Date: Fri Feb 15, 2002 6:36pm
Subject: Re: need #
Business 623-742-7217 Mobile 602-463-4217
TomP
aphrodsyak@aol.com wrote:
could someone help me out with a # for scott fabrication?? Me and sharky had it but it has dissapeared. please call me # 480 650 3887. or just shoot it back too I guess thats cool. thanks.
ERIC
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
42903 From: Joe W <arizonajeep@c...>
Date: Fri Feb 15, 2002 6:15pm
Subject: RE: need #
That would be "Sharky and I"...
Hi Eric! By the way... Tom's doing a great job so it will soon be time for us to talk about the home refinance!
Joe
Me and sharky had it but it has dissapeared.
ERIC
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
42904 From: Stu Olson <solson8@q...>
Date: Fri Feb 15, 2002 6:48pm
Subject: RE: Change your spark plugs people! 9mpg to 12mpg Overnight!
Joe,
Thanks for the heads up. I'm at 40K so I guess I am due too.
I had given them no thought since the Jeep starts and runs so well. I'll
have to put a new set in soon and see if I can go from 3 to 4 MPG. ;) (you
did say a 33% increase, right?)
Catch ya later.........Stu
Stu Olson
www.stu-offroad.com
-----Original Message-----
From: Joe W [mailto:arizonajeep@c...]
Sent: Friday, February 15, 2002 7:11 PM
To: Azvjc (E-mail)
Subject: [az_vjc] Change your spark plugs people! 9mpg to 12mpg
Overnight!
Evening,
After 37,000 miles on my original factory plugs... I changed them last week.
Plug gaps were worn from the nominal .035" to .067" so I replaced them with
new spark plugs.
Net results... 33% gain in fuel economy from replacing them.
Suggestion; Chrysler doesn't use 100k mile plugs... If you have over 25k on
the original set, I'd replace them.
New plugs are Bosch Platinum... love em... and please; don't buy Split-Fire
plugs unless you like throwing money away.
Kind Regards,
Joe West
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
42905 From: Fred <fredtj@h...>
Date: Fri Feb 15, 2002 6:58pm
Subject: Re: Change your spark plugs people! 9mpg to 12mpg Overnight!
There has been some suggestions regarding not using Platinum plugs. I
haven't followed the discussions, so I don't know that the cons are/were. I
simply use the recommended Champion plugs, less than $1.00 each and change
'em every 20,000 miles. One of the best things that you can do. Cheap and
quick.
Cheers,
Fred
----- Original Message -----
From: "Joe W" <arizonajeep@c...>
To: "Azvjc (E-mail)" <az_vjc@yahoogroups.com>
Sent: Friday, February 15, 2002 7:11 PM
Subject: [az_vjc] Change your spark plugs people! 9mpg to 12mpg Overnight!
> Evening,
>
>
> After 37,000 miles on my original factory plugs... I changed them last
week.
> Plug gaps were worn from the nominal .035" to .067" so I replaced them
with
> new spark plugs.
>
> Net results... 33% gain in fuel economy from replacing them.
>
> Suggestion; Chrysler doesn't use 100k mile plugs... If you have over 25k
on
> the original set, I'd replace them.
>
> New plugs are Bosch Platinum... love em... and please; don't buy
Split-Fire
> plugs unless you like throwing money away.
>
> Kind Regards,
>
> Joe West
>
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
42906 From: Bill Witt <k7ant@t...>
Date: Fri Feb 15, 2002 7:02pm
Subject: Re: Fw: Rock Crawl Cancelled?
"Part of the reason was we did not receive the support from our local rock crawlers to make this event a spectacular event. " as Quoted by Sandy McCullen
Can someone explain this quote for me?
Bill W
K7ANT
97 TJ with a few mods.
http://k7ant.rockcrawler.com/
Up on the Mogollon Rim in God and 4 wheeler's country.
----- Original Message -----
From: Mike
To: AZ Virtual Jeep Club ; Arizona Dust Devils
Sent: Wednesday, February 13, 2002 3:53 PM
Subject: [az_vjc] Fw: Rock Crawl Cancelled?
This is the reply I got from Sandee M. of ASA Four Wheel Drive Clubs. To bad I was looking forward to spectating.
Mike Wixom
85 CJ-7
----- Original Message -----
From: Sandee McCullen
To: Mike
Sent: Wednesday, February 13, 2002 3:08 PM
Subject: RE: Rock Crawl Cancelled?
Boy, the grapevine is FAST............... yes, the event as a "competition" has been cancelled due to BLM mucking around getting the permit approved and putting "stipulations" in place that were above the line etc etc. Part of the reason was we did not receive the support from our local rock crawlers to make this event a spectacular event.
The Arizona Rock Crawlers are planning a campout this weekend and will be doing "rock crawling" for fun and exhibition.......... EVERYONE is invited to join in.
Sandee
-----Original Message-----
From: Mike [mailto:h8pvmnt@hotmail.com]
Sent: Wednesday, February 13, 2002 9:30 AM
To: Sandee McCullen
Subject: Rock Crawl Cancelled?
Sandee,
I just got an e-mail saying the rock crawl had been cancelled is this true?
Mike Wixom
85 CJ-7
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
42907 From: Craig Micek <micekc@e...>
Date: Fri Feb 15, 2002 7:03pm
Subject: Re: Fw: Rock Crawl Cancelled?
That was the impression I had. That it was for the hardcore, ARCA style rigs and competitors.
Who would have entered if they knew there was a class for daily drivers and not a high probability of rollovers, but something that would test your driving skills? Anyone?
----- Original Message -----
From: ebnhils
To: Craig Micek
Sent: Friday, February 15, 2002 4:53 PM
Subject: Re: [az_vjc] Fw: Rock Crawl Cancelled?
I was told that there were only 15 entries and they needed 40 just to pay for the permits, etc. Apparently, some people were worried that it was going to be too difficult and only for the hard core rock crawlers.
----- Original Message -----
From: Craig Micek
To: AZ Virtual Jeep Club ; Arizona Dust Devils ; Mike
Sent: Wednesday, February 13, 2002 9:36 PM
Subject: Re: [az_vjc] Fw: Rock Crawl Cancelled?
I was looking forward to this also. Sandy said not enough support, any idea what she means? Was it not enough entries? Or did they need a letter campaign to the BLM? I was not aware of any appeal for assistance.
Craig Micek
----- Original Message -----
From: Mike
To: AZ Virtual Jeep Club ; Arizona Dust Devils
Sent: Wednesday, February 13, 2002 3:53 PM
Subject: [az_vjc] Fw: Rock Crawl Cancelled?
This is the reply I got from Sandee M. of ASA Four Wheel Drive Clubs. To bad I was looking forward to spectating.
Mike Wixom
85 CJ-7
----- Original Message -----
From: Sandee McCullen
To: Mike
Sent: Wednesday, February 13, 2002 3:08 PM
Subject: RE: Rock Crawl Cancelled?
Boy, the grapevine is FAST............... yes, the event as a "competition" has been cancelled due to BLM mucking around getting the permit approved and putting "stipulations" in place that were above the line etc etc. Part of the reason was we did not receive the support from our local rock crawlers to make this event a spectacular event.
The Arizona Rock Crawlers are planning a campout this weekend and will be doing "rock crawling" for fun and exhibition.......... EVERYONE is invited to join in.
Sandee
-----Original Message-----
From: Mike [mailto:h8pvmnt@hotmail.com]
Sent: Wednesday, February 13, 2002 9:30 AM
To: Sandee McCullen
Subject: Rock Crawl Cancelled?
Sandee,
I just got an e-mail saying the rock crawl had been cancelled is this true?
Mike Wixom
85 CJ-7
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
42908 From: Halverson <byrnec@q...>
Date: Fri Feb 15, 2002 7:11pm
Subject: Re: New bar with no sign in sorry
Boy-He does nice work, doesn't he?
John
----- Original Message -----
From: hackle@qwest.net
To: az_vjc@yahoogroups.com
Sent: Friday, February 15, 2002 6:45 PM
Subject: [az_vjc] New bar with no sign in sorry
1 of 8 photos
Great news! You've been invited to view Jim Florence's online photo album. It's easy to see Jim Florence's photos at Ofoto - just click on the link below to get started.
To view the album, click here. You may be asked to sign in or become an Ofoto member. It's free to join, and you'll get free shipping on your first order! As an Ofoto member, you can order prints of the photos that have been shared with you, plus frames, cards and more. Try us out!
If you can not see the links above, copy and paste the following URL directly into your browser: http://www.ofoto.com/I.jsp?m=86684083303&n=518709666
If you have any questions, please email the Ofoto Customer Service at service@ofoto.com or use our online form.
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
42909 From: Halverson <byrnec@q...>
Date: Fri Feb 15, 2002 7:15pm
Subject: Re: HELP directions to bartlett lake please
Bruce-- Take the 101 north to Pima Rd. Follow it north until you see the
Bartlett Lake turnoff, then turn east and follow the signs.
John
----- Original Message -----
From: "bruce stropp" <jeep4offrd@h...>
To: <az_vjc@yahoogroups.com>
Sent: Friday, February 15, 2002 7:23 PM
Subject: [az_vjc] HELP directions to bartlett lake please
> Were planning on going on the run at fr-42 tomorrow but have no idea how
to
> get to the parking lot at bartlett lake. Can anyone help us out with
> directions. Were comming from Tempe.
> Thanks, Bruce
>
>
>
> __________________________________________________ _______________
> Get your FREE download of MSN Explorer at
http://explorer.msn.com/intl.asp.
>
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>