Post your CJ pics and specs here

[chopped7]

K7MTO was the inspiration to start this thread when he posted a CJ run. So whatcha got?

I have a '76 CJ7
AMC 360
Th400
NP231/D300 dual t-case
37"MT Claws
108" wheelbase
Waggy D44's

http://img494.imageshack.us/img494/4499/picture0063bs.jpg

[Billy 4 hp]

For us it is a 1981 CJ7 with:

AMC20 3.73, Lockright, Superior Axles, Disc Brakes
CV Driveshaft Rear, HD Front
Dana 300 (Stock, but rebuilt) and twin sticks
Dodge NV4500 Granny 5 speed
1998 Chevrolet Vortech 350 w/ DFI Fuel Injection :D
Dana 30 3.73, PowerTrax No Slip, Chromemoly Tierods, Warn Internal Spline Hub conversion
Some protection here and there
Superlift 2.5 lift with TeraFlex shackles
Airconditioning so we can run all year long!!!
Warn M8000
And some other stuff...

http://www.virtualjeepclub.com/attachment.php?attachmentid=9331&stc=1&d=1170075993

http://www.virtualjeepclub.com/attachment.php?attachmentid=9332&stc=1&d=1170075993

[Wildcat455]

Specs:
455 Buick, RV cam and Manifold, Quadrajet Carb.
TH400 Transmission, Novak Adapter, Dana 300 with 4:1 Tera Low.
1350 long travel driveshafts, Semifloat Dana 60 Rear 4.86 R&P, ARB, Anti Wrap bar. Dana 44 Front 4.86 R&P, ARB, Chromoly shafts, CTM's. Custom crossover steering, 1.5" .250" wall tie rod and drag link, Ranch 9000 shocks, 37" MTR's. Weelbase stretched to 102" via shackle reversal in front, and S-10 springs in back, 32 gallon gas tank, full cage, Warn 8274-50 Winch. A bunch of other stuff, but that's all that's important. I built this rig for my son, but at the moment it seems he's lost interest in it, (He's only 12, and somehow video games are more appealing. :rolleyes: ) so I'm driving it for some old school wheeling!

Windshield was left at the parking lot, this photo was on the way to Anaconda.
http://i18.tinypic.com/4bozaz8.jpg

[Craig]

84 Cj

350 FI SBC
TF 727
D300 4:1 Twin Sticks 32 Spline Rear output
Hi Angle Driveshafts
D60 ARB Front, 14 Bolt Detroit Rear w/ Discs
Red Label 39" Krawlers on Walkers
Hydro Assist steering behind the axle tie rod
Spring Over on Ranch 44044s
100" WB
and lots more!

http://www.virtualjeepclub.com/attachment.php?attachmentid=9333&stc=1&d=1170104152

[Scramblin_Jim]

Well for me I have always liked the pickup look so when it came to a Jeep it had to be a Scrambler! Only had it since Sept 2006, slowly going thru it and upgrading and replacing what I can on a novice's experience and limited budget.

Specs:
1983
258 I-6 with newly installed Howell TBI
T-5
Stock vehicle with these recient repairs/replacements:
3-core radiator, new thermostat, hoses, fan, water pump, overflow bottle
new gas tank and sending unit
new Tuffy center console and glove box
new ignition switch, new headlight switch
"YJ" style mirrors replacing "CJ" type
CB radio and antenna
new exhaust system from down pipe to tailpipe

Still need to rework and strengthen some rusty spots. My goal is just to slowly go thru all systems and upgrade them. I have no intent to ever do a frame off resto as I don't see the need to spend big bucks making it look cosmetically beautiful and then go scratch and dent it up wheel'n. If I want a good look'n one, I would have bought a new one!

[ArizonaJeeper]

Mine ISN'T anywhere close to being nice like what has been posted

79 CJ5
T-176
Dana 300
Frame Off
SOA w/SR
Dual L/R's

First pic is one of the last runs it was on YEARS ago on Bumble Bee and the 2nd is one of the few times it has been out of the garage in YEARS :(
J

[fatbob309]

First pic is one of the last runs it was on YEARS ago on Bumble Bee and the 2nd is one of the few times it has been out of the garage in YEARS :(
J

You need to get out and wheel! Quit talking about it and do it!

:cool:

[fatbob309]

Mine is a 97 CJ... Ok fine its a TJ with CJ lights.

http://i114.photobucket.com/albums/n280/fatbob309/THe%20jeep/PA140004.jpg

4cyl
5spd
30/44 combo w/4:88's locked
Other fun stuff too

[ArizonaJeeper]

You need to get out and wheel! Quit talking about it and do it!

:cool:

:( I KNOW!

As Ive said it sucks not having any other "Jeeper" near me...when I used to wheel it we would get together during the week/weekend's and help wrench on each others Jeep.

I just need to charge the battery and fire it up/get current emmissions on it :rolleyes:
J

[ArizonaJeeper]

Mine is a 97 CJ... Ok fine its a TJ with CJ lights.

http://i114.photobucket.com/albums/n280/fatbob309/THe%20jeep/PA140004.jpg

4cyl
5spd
30/44 combo w/4:88's locked
Other fun stuff too

Ive never seen yours...VERY nice.
J

[k7mto]

Specs:

258 I-6 bored .060 - RV cam - Howell TBI
T-18A - AA adapter - Dana 20 - long travel driveshafts
SF Scout Dana 40 Rear (building a 60) - 4.88 - Detroit - Alloy USA chromoly shafts
Waggy Dana 44 Front - 4.88 - Lockright - Alloy USA chromoly shafts - Parts Mike's hi-steer - 1.5" .250" wall tie rod and drag link
Custom shackle reversal in front - RE 1.5" reverse eye YJ springs all around
Rancho 5000 shocks - 35" BFG's
Weelbase stretch to come using XJ or Dakota springs
full cage - Mastercraft seats - C02 - Warn M8000 Winch - lots of other stuff

http://www.virtualjeepclub.com/attachment.php?attachmentid=9364&d=1170205500

http://i31.photobucket.com/albums/c400/k7mto/Elvis/100_0956.jpg

http://www.virtualjeepclub.com/attachment.php?attachmentid=9365&d=1170205500

http://www.virtualjeepclub.com/attachment.php?attachmentid=9366&d=1170205500

http://www.virtualjeepclub.com/attachment.php?attachmentid=9367&d=1170205500

[Billy 4 hp]

Mine ISN'T anywhere close to being nice like what has been posted

79 CJ5
T-176
Dana 300
Frame Off
SOA w/SR
Dual L/R's

First pic is one of the last runs it was on YEARS ago on Bumble Bee and the 2nd is one of the few times it has been out of the garage in YEARS :(
J

What are you talking about, that's a nice CJ.... :D

[OlneyJeeps]

46 CJ2A 134 L4 (63hp!!!), T90, D18, mod27 frt, 32x11.5 BFG MT , mod 44 (lockright) rear, 5.38:1 gears, rancho 1" lift
http://www.virtualjeepclub.com/attachment.php?attachmentid=9375&d=1170213127
http://www.virtualjeepclub.com/attachment.php?attachmentid=9376&d=1170213127

78CJ7 304, TF999,D300, 30frt (lockright),44 rear (lockright), 3.73:1, 35x12.5 BFG MT, shackle inversion, YF 3" rancho rear springs up front, 1" body lift, on board air, TJ seats :eek: , bunch of junk

http://www.virtualjeepclub.com/attachment.php?attachmentid=9377&d=1170213127
[/IMG]

83 CJ8 (scrambler... ok its not mine, but I get to drive it.... "work" Jeep:D ), 258 6cyl, T18, D20
http://www.virtualjeepclub.com/attachment.php?attachmentid=9378&d=1170213127


8 Barbie:eek: Jeep. twin 12V motors (running on 14V battery:D ), siped tires
http://www.virtualjeepclub.com/attachment.php?attachmentid=9379&d=1170213127

[k7mto]

What are you talking about, that's a nice CJ.... :D


No kidding. If you aren't going to let it out to play, maybe you should sell it to me ;) Nah, then it might end up lookig like my 79 5 :rolleyes:

[johndorf]

Sorry no pics:o , but here she is...1978 CJ7 AMC 401, TF999, Dana 300, Dana 30 w/Alloy USA's, AMC 20 w/Warn full float kit, 4.56's, full cage, harnesses, Mastercrafts, & 35's BFG MTR's. Some nice CJ's on this board, great idea to get a run together. Hey Bill(Wildcat), that is a nice set up, I was parked next to you getting gas before the training class run, that thing sounds mean:D ...John

[ArizonaJeeper]

What are you talking about, that's a nice CJ.... :D

Thanks...BUT not anywhere near a lot here...I REALLY do miss driving it though.

No kidding. If you aren't going to let it out to play, maybe you should sell it to me ;) Nah, then it might end up lookig like my 79 5 :rolleyes:

:cool: I think it is illegal to own 2 5's...I had 2 for a while but figured 2 5's and a ZJ in one house is just WRONG ;)
J

[k7mto]

:cool: I think it is illegal to own 2 5's...I had 2 for a while but figured 2 5's and a ZJ in one house is just WRONG ;)
J

That's funny - I also have a 96 ZJ Laredo :)
It's bone stock but has a V8. I use it to flat tow the CJ sometimes.

[ArizonaJeeper]

That's funny - I also have a 96 ZJ :)

:D Kath drives our 93 COMPLETE stock(except canyons) ZJ...Im talking no cladding or RR and it doesnt have power ANYTHING :cool:

Man, Reading the CJ thread makes me REALLY miss mine more than I have in a LONG time.
J

[OlneyJeeps]

Wa-hoo! after far too long, I actually mustered patience to read and FOLLOW destructions on how to properly post pics!!!!

I'd say that calls for a beer!!

[ryan rich]

heres my pos

1980 cj
258 eng with custom cracked exaust manifold
tf 999 tranny with artcar shifter
dana 300
stock axles dana 44 & 12 bolt waiting 4 install
rengade seats
cage
sprung over
37" mtrs

[ecamp55]

Here's mine.....taken last Sept. at Rockport Off Road Park in Illinois

[k7mto]

A little help for you guys...

jhpribbeno's Scrambler:

http://www.virtualjeepclub.com/attachment.php?attachmentid=9335&d=1170110103


Arizona Jeeper's CJ5:

http://www.virtualjeepclub.com/attachment.php?attachmentid=9361&d=1170181000
http://www.virtualjeepclub.com/attachment.php?attachmentid=9362&d=1170181000


Ryan Rich's CJ7:

http://www.virtualjeepclub.com/attachment.php?attachmentid=9416&d=1170291212


ecamp55's CJ5:

http://www.virtualjeepclub.com/attachment.php?attachmentid=9420&d=1170299075
http://www.virtualjeepclub.com/attachment.php?attachmentid=9421&d=1170299075

[ryan rich]

thx matt one of these days i might learn how to do that :confused:

[ArizonaJeeper]

Thanks a lot Matt
J

[CJ76]

http://virtualjeepclub.com/attachment.php?attachmentid=11974&stc=1&d=1184110048http://virtualjeepclub.com/attachment.php?attachmentid=9435&stc=1&d=1170364818
Martinez
1976 CJ-7
360
T-18, Teralow 20
4:10's w/ Detroits
4.5" RE Springs
Homebuilt flat fenders,sliders and spare tire carrier

[k7mto]

CJ76's CJ-7

http://www.virtualjeepclub.com/attachment.php?attachmentid=9435&d=1170364816

[WalterD]

A little help for you guys...



OK. How do you get such good pics with only 100k filesize limit. Mine always turn out like crap.
Walter

[WalterD]

Here is my 79 CJ7. This is when my son had it. Now it's mine.
304 Auto

http://i163.photobucket.com/albums/t291/WalterD_photo/CIMG0398.jpg

[ReillJeep]

Hello,
I just joined today and I just bought my Jeep last week.

1977 CJ7 with a 360, Hydra-Matic 400 trans, quadra Trac T-case, full roll cage, hard top, 8,000 lb Warn winch and 35 inch Goodyears.

I replaced the seats, but I am having trouble with the seat hieght, the original risers seems to be to tall.

[lancetkenyon]

Hello,
I just joined today and I just bought my Jeep last week.

1977 CJ7 with a 360, Hydra-Matic 400 trans, quadra Trac T-case, full roll cage, hard top, 8,000 lb Warn winch and 35 inch Goodyears.

I replaced the seats, but I am having trouble with the seat hieght, the original risers seems to be to tall.

Welcome to your new addiction, and to the club!

[rwhitbeck]

Here's my '76 CJ7...courtesy of MChat! I can only say that it has a lot of work left to do, but I'm getting there piece by piece...went and picked up a hood and fenders for it on Saturday...the rest will come and I will get it on the trails one of these days.

As far as specs go...this is my wish list:

Fuel Injected GM 350
TH400
Twin Stick Dana 300 w/ 4:1
Dana 60 Rear
Dana 60 Front
4" Suspension Lift (don't know which one yet) with shackle reversal in front
37" MTR's
WB Stretched to 110"

Sorry, I am another one that can not get his pics to post directly!

Ron

[k7mto]

ReillJeep's CJ7:

http://www.virtualjeepclub.com/attachment.php?attachmentid=9501&d=1170809856

http://www.virtualjeepclub.com/attachment.php?attachmentid=9502&d=1170809856


rwhitbeck's CJ7:

http://www.virtualjeepclub.com/attachment.php?attachmentid=9503&d=1170811397

[rwhitbeck]

Thanks, Matt!

[k7mto]

np - just making it easier for folks browsing the CJ pics so they don't have to click all the links :)

Get a frame under that thing!

[rwhitbeck]

I actually had a frame for it...or my YJ...had to leave it behind when I moved because I didn't have any way of moving it or a place to put it once I moved! I'll eventually get it finished...just need to move to a place where I can actually work on it and get some finances to break loose so I can afford to work on it!

[ob1jeeper]

Here's a couple of OlBlue...:) My trusty ride of many years. One owner (me), she's a shade over 30 years old, with a shade over 400K on the clock. Remaining original stuff parts include; suspension springs, axles, frame & skids, body (most of it anyway), BW-1339 T/case, TH-400 trans, originally a 258, but is now motiviated by an AMC 401, equipped with GM TBI.

Wrecking Ball - Johnson Valley, CA
http://img.photobucket.com/albums/v674/ob1jeeper/Jeeping/Johnson%20Valley/Wreckingball-7.jpg

Mickeys Hot Tub - Moab, Ut
http://img.photobucket.com/albums/v674/ob1jeeper/Jeeping/Moab%202005/Img_0676.jpg

Harquahala Mtn. - Smithsonian Observatory (Aguila, AZ)
http://img.photobucket.com/albums/v674/ob1jeeper/Jeeping/Colorado/DSC00233.jpg

Imogene - Ouray/Telluride (Colorado)
http://img.photobucket.com/albums/v674/ob1jeeper/Jeeping/Colorado/July%2006/NewPics197.jpg

Snow Wheeling - Turkey Creek (Off Gen Crooks Hwy, near Payson)
http://img.photobucket.com/albums/v674/ob1jeeper/Jeeping/Snow%20Wheeling/Jan%202007/SnowTrip190.jpg

[georgia]

Sold My YJ...Bought this today


http://i147.photobucket.com/albums/r312/docchaos_photos/Christine/JamesonRedneckramp.jpg

Ironhead is 1955 Jeep CJ-5. It's kinda a bastard red headed step child, since it has a Chevrolet V-6 drivetrain and a set of Ford full width HD axles. Anyway, here are the specs...

Chevy V6 Motor (200 HP +/-),

SM420 Transmission (4 Spd, Granny Gear)

Dana 20

4 Core Griffin Aluminum Radiator,

Adjustable Brake Booster

Auto Meter Gauges

Removable Steering Wheel

Custom Full Rollcage

40" Military Tires on 16" Aluminum Rims

Ford 9" Rear / HD D44 Front

5.13 Gears

Spooled Front & Rear

Superwinch Locking Hubs On The Front (Changing to Warn hubs as
soon as the $$$ allow it)

SOA +3" Springs

Quarter Eliptical Springs Front & Rear

Fox Racing Shocks on all four corners. Two fronts are reserve reservoir shocks.

Rocklights

KC 150's Lights

Dual Battery

Warn 8274

Hydraulic Assist Steering

On Board Air

More stuff I cannot think of right now...


And what does all this equal boys and girls... 100:1 +/- crawl ratio.

The first things I will address is the oil leak is has, and the paint job. Even though I got this rig to do extreme trails, the paint that is currently on it is flaking and peeling. I'll probably keep it black, for the time being. Also, I'll be doing some minor fab projects to it soon, like mounting the Hi-Lift, the Spare Tire and some other little stuff, not to mention the D44 diff cover.

[TinyMan]

1946 Willys CJ2A, stock 134 CID, flat head four cylinder, T-90 tranny, Spicer 18 T-case, Dana 27 front and Dana 41 rear both open diff, with 5.38 gears, CJ3A windshield frame. Not ready for the trail or road yet, but the build up will start soon.

Upgrades include, Rancho 2.5 inch lift, 32x9.50 Swamper TSL's, Lockright for the rear, Warn hubs, a real roll cage, seats, Saginaw steering, disc brakes up front, 11 inch drums for the rear, and more stuff I'm missing.....
http://i97.photobucket.com/albums/l231/7Lbar/CJ2A/P1010032.jpg
http://i97.photobucket.com/albums/l231/7Lbar/CJ2A/P1010035.jpg

[CaptainMorgan]

Ok, not mine. It is a '79 Cj-5. It belongs tp new member 350cj5.
http://i77.photobucket.com/albums/j48/Jeepinyahoo/pisturessedonaandhighraul036.jpg?t=1172682483

Specs(believe it or not):

-'97 Chevy Vortech 350
-Hedman headers
-K&N FIPK
-Dual Flowmaster Exhaust
-TH350(I think)
-B&M Slap Shift Kit
-6 Point Roll Cage
-30 gallon fuel tank located in the bed area
-Custom guages
-Dana44 rear w/selectable locker(don't know which kind)
-4.10 gears
-2 1/2"-3 1/2" lift
-31" AT's :(

The Jeep is going through a re-build this spring and summer. The plans on the chopping block include:

-Re-attach bumper/tow bar.
-Replace windsheild and ws frame (already have the parts)
-Sand, straighten, bondo and paint body with the free help of Tom Stephenson, a locally famous Chopper painter, whose work has been in Easyriders Mag.
-33's!!!
-Install full soft top.

I will post pics when we are done, it should look like a million dollars when were through. At least compared to that awful picture after the flop and destruction of the bumper.

[chopped7]

I love the Cinders. That pic makes me want to go up there.

[ademster]

http://a674.ac-images.myspacecdn.com/images01/10/l_3c9e0985413cacacc17e13da91c5ca99.jpg
http://a208.ac-images.myspacecdn.com/images01/59/l_64f67694d46bdca99109e5d4a7e69ddf.jpg
http://a884.ac-images.myspacecdn.com/images01/14/l_e825d88ccdcbb47a92a78c0a2a5bc703.jpg
http://a4.ac-images.myspacecdn.com/images01/49/l_accf3f198737d8f80bcc77b02f0e5adb.jpg

[ecp3031]

Specs:
1984 CJ 7
258 with Howell FI
Davis HEI ignition
T-5 ( came with t-4)
33X12.50 MTRs
American Racing Outlaw 2 wheels
4" inch lift
Rancho 5000 shocks
4.10 gears
Rear end- AMC 20, Detroit locker, 1 piece axles
Front end - Dana 30, Quick lock
Mike Baney built rear bumper and tire carrier
Poison Spider sliders
Off Your Rocker rear corners
LED tailights
Rock Hard full cage
Cobra CB
Power Tank CO2 system

[Telanas]

This is my 1980 CJ-7:
YJ body
AMC 360 V8
727 3-speed auto transmission
Heated Electric Seats (From an Impala)
Crazy cup holders (From a conversion van?)

http://ucc433.ucc.nau.edu/albums/FirstPictures-03-07/Picture_003.sized.jpg
http://ucc433.ucc.nau.edu/albums/FirstPictures-03-07/Picture_002.sized.jpg
http://ucc433.ucc.nau.edu/albums/FirstPictures-03-07/Picture_005.sized.jpg

[CaptainMorgan]

Telanas, that must be this morning you took those pics...Cool. Here are pics of the '77 CJ-5 I got last Friday.

-258, rebuilt and bored out .060 over
-T-18 4-speed
-Unknown T-case...will edit when figured out.
-Full Cage built by Hunter Off-Road
-CD
-New Seats
-Tuffy Console
-Stock axles.
I took the top off to paint the cage and install the new seatbelts...now it is snowy.
http://i77.photobucket.com/albums/j48/Jeepinyahoo/Picture066.jpg?t=1175099143
http://i77.photobucket.com/albums/j48/Jeepinyahoo/Picture067.jpg?t=1175099180

[rockclimber]

http://i152.photobucket.com/albums/s188/chadsaref/alexautumn1004.jpg

http://i152.photobucket.com/albums/s188/chadsaref/alexautumn1009.jpg

Finally got some pics of my jeep to post :D . Now I gotta go crank wrenches.

Chad

[SHNIPE]

WOW there are some nice oldies running around!! I think thats the first picture ive ever seen of Craigs other than the avatar. Wicked nice! Makes me wanna sell my TJ... ok not really... yeah umm

http://virtualjeepclub.com/attachment.php?attachmentid=9416&d=1170291212
LOL @ the POS in the background!!

[CaptainMorgan]

Why not just get one of each like I did...then you have no regrets...instead, very empty pockets...

[SHNIPE]

cause CJ's are too pretty to dent up and turn ugly. TJs dont count so we're allowed to abuse them :D

[CaptainMorgan]

cause CJ's are too pretty to dent up and turn ugly. TJs dont count so we're allowed to abuse them :D

Exactly why I like to have both.:D

[ademster]

I got a 82 cj and it isnt pretty... its dented. and striped.

[CaptainMorgan]

I got a 82 cj and it isnt pretty... its dented. and striped.

And you beat on it like a redheaded stepchild:p

[ademster]

And you beat on it like a redheaded stepchild:p



I guess it is close to that considering the color...
and umm... yeah... just imaging of the abuse it will recieve with the lockers an gears... if i can get gears for cheaps.;)

[ROCKINREDTJ]

This Jeep looks familiar didn't you do a TSL vs Bogger magazine article several years ago with Eric Boyer's Red Wrangler.

http://www.virtualjeepclub.com/attachment.php?attachmentid=9362&d=1170181000

[ROCKINREDTJ]

Here's pictures of my old 85 cj 7. I had to sell it about a year ago family needs come first but boy do I miss it.

258 I-6, 4 speed, dana 300 T-case, full width axles w/ 4.88s & spooled front and rear.

http://i69.photobucket.com/albums/i45/azsuperduty/mr_eds_day_2.jpg

http://i69.photobucket.com/albums/i45/azsuperduty/rob.jpg

[jeffzap]

http://zapotoczny.com/images/cj.jpg

Sorry for the street poser, but this (fiberglass) puppy isn't hitting any rocks until I get more protection installed.

[WalterD]

http://zapotoczny.com/images/cj.jpg

Sorry for the street poser, but this (fiberglass) puppy isn't hitting any rocks until I get more protection installed.
With fiberglass I believe you can generally buff out most rockrash.:D Nice looking CJ

[Moriarty]

A shot of my 85. It has been kept mostly stock by its two previous owners so it will need a few things. Glad to join the group.

[ademster]

Specs in sig.
http://www.levonius.com/adam/wheeling/New_Folder/images/jeep/CIMG0003.JPG

http://www.levonius.com/adam/wheeling/New_Folder/images/jeep/CIMG0002.JPG

[lancetkenyon]

cause CJ's are too pretty to dent up and turn ugly. TJs dont count so we're allowed to abuse them :D

HEY! I resemble that remark.:(

[idontknow]

shes pretty in her own way(Gloria)

http://i55.photobucket.com/albums/g121/dickenji/CIMG0177.jpg

http://i55.photobucket.com/albums/g121/dickenji/CIMG0176.jpg

[Lumpster]

OK here is what I am starting with. Already purchased and installing 4" lift springs plus 1" body lift, shackle reverse, new interior, front and rear bumpers, winch, hard top w/hard doors, 33x12.50 BFG MT's. (just need some time......). Already rebuilt the rear end. Looking forward to my first outing..... I will post some updated pics in a couple months.