blooddrive
01-04-2004, 09:22 AM
38378-38402
38378 From: Len Sullivan <kermit@e...>
Date: Fri Dec 28, 2001 6:50pm
Subject: Re: SUV Pull is ON for Dec 29!!!!
Hi all
I'm still going to be there tomorrow, but it looks like I may be a bit late.
Don't wait for me at the gate.....I'll meet you in Cove 2.
Len
-----Original Message-----
From: linda luik <minihummer@w...>
To: Len Sullivan <kermit@e...>; Halverson <byrnec@q...>;
Nixon, Scott <scnix1@h...>; DougB <azjeep@h...>; Gary Holmes
<Niitoyis@w...>; Robert Holmes <flamable_liquid@h...>;
Bab****, Charles H <charles.h.bab****@i...>; az_vjc
<az_vjc@egroups.com>; graham, steve <stevegraham@w...>
Date: Saturday, December 22, 2001 5:21 PM
Subject: SUV Pull is ON for Dec 29!!!!
>Just want to let y'all know. Steve and I took a trip out there this
>morning and the burned up SUV is still in the 2nd Cove. We hi-lifted the
>rear to see if the axle would turn. We could not get it to pudge so I
>doubt that putting tires on it will do much good. The roof is caved in.
>
>Steve thinks that most of the hauling will need to be done with chain.
>The engine hood needs to be cut off. The body needs to be flipped on its
>roof.
>
>We selected what we think is the easiest route. Two uphills, two
>downhills. All are relativley easy slopes (lot of moguls of course .. we
>can't make it too easy) and there's a lot of soft sand trail to drag the
>SUV through.
>
>The 2nd cove is in pretty bad shape. We didn't go to the first cove, but
>it is probably even more trashed. The area inside the green gate is
>really bad.
>
>Hope to see you out there!
>
>December 29. Meet by the green gate at Butcher Jones Rec Area at 8:30am.
>Get on the trail by 9:00am. Hopefully get the SUV out before sundown.
>The second cove is a long way from the green gate!
>
>PS. If you want to try tires, the SUV is a mid-80s Pathfinder, 6-bolt
>wheels and will most likely require metric lug nuts.
>
>Linda
>
>linda luik wrote:
>>
>> Well, so far it looks like we have a pretty good turnout. I will post
>> this as trail ride for Saturday, Dec 29, if that's okay with everyone. I
>> will contact the FS with the date. Meet at Butcher Jones at 9:00-9:30am
>> and go from there. I hope it doesn't rain!
>>
>> Sign ups so far are:
>>
>> LenS
>> JohnH
>> DougB
>> GaryH
>> RobertH
>> CharlesB
>> SteveG
>> ScottN
>>
>> LindaL
--------------------------------------------------------------------------------
ADVERTISEMENT
38379 From: <JNB4PLS@a...>
Date: Fri Dec 28, 2001 2:01pm
Subject: Re: Need Control Arm Bushings
Ditto, and I'm sure that you meant TRAILS, .........right Stu? ;-)
Best Regards,
John
38380 From: Stu Olson <solson8@q...>
Date: Fri Dec 28, 2001 7:11pm
Subject: RE: Need Control Arm Bushings
Hmmmm.....must have been some kind of suppressed thought thing....say, did I
ever tell you about this one bachelor party? LOL
Stu
Stu Olson
www.stu-offroad.com
-----Original Message-----
From: JNB4PLS@a... [mailto:JNB4PLS@a...]
Sent: Friday, December 28, 2001 8:02 PM
To: az_vjc@yahoogroups.com
Subject: Re: [az_vjc] Need Control Arm Bushings
Ditto, and I'm sure that you meant TRAILS, .........right Stu? ;-)
Best Regards,
John
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
38381 From: Halverson <byrnec@q...>
Date: Fri Dec 28, 2001 7:26pm
Subject: Re: SUV Pull is ON for Dec 29!!!!
WE won't be able to make it as we got the stomach flu-hope it goes well.
John Halverson
----- Original Message -----
From: "Len Sullivan" <kermit@e...>
To: <minihummer@w...>; "Halverson" <byrnec@q...>; "Nixon,
Scott" <scnix1@h...>; "DougB" <azjeep@h...>; "Gary Holmes"
<Niitoyis@w...>; "Robert Holmes" <flamable_liquid@h...>;
"Bab****, Charles H" <charles.h.bab****@i...>; "az_vjc"
<az_vjc@egroups.com>; "graham, steve" <stevegraham@w...>
Sent: Friday, December 28, 2001 7:50 PM
Subject: Re: SUV Pull is ON for Dec 29!!!!
> Hi all
>
> I'm still going to be there tomorrow, but it looks like I may be a bit
late.
> Don't wait for me at the gate.....I'll meet you in Cove 2.
>
> Len
>
>
>
> -----Original Message-----
> From: linda luik <minihummer@w...>
> To: Len Sullivan <kermit@e...>; Halverson <byrnec@q...>;
> Nixon, Scott <scnix1@h...>; DougB <azjeep@h...>; Gary Holmes
> <Niitoyis@w...>; Robert Holmes <flamable_liquid@h...>;
> Bab****, Charles H <charles.h.bab****@i...>; az_vjc
> <az_vjc@egroups.com>; graham, steve <stevegraham@w...>
> Date: Saturday, December 22, 2001 5:21 PM
> Subject: SUV Pull is ON for Dec 29!!!!
>
>
> >Just want to let y'all know. Steve and I took a trip out there this
> >morning and the burned up SUV is still in the 2nd Cove. We hi-lifted the
> >rear to see if the axle would turn. We could not get it to pudge so I
> >doubt that putting tires on it will do much good. The roof is caved in.
> >
> >Steve thinks that most of the hauling will need to be done with chain.
> >The engine hood needs to be cut off. The body needs to be flipped on its
> >roof.
> >
> >We selected what we think is the easiest route. Two uphills, two
> >downhills. All are relativley easy slopes (lot of moguls of course .. we
> >can't make it too easy) and there's a lot of soft sand trail to drag the
> >SUV through.
> >
> >The 2nd cove is in pretty bad shape. We didn't go to the first cove, but
> >it is probably even more trashed. The area inside the green gate is
> >really bad.
> >
> >Hope to see you out there!
> >
> >December 29. Meet by the green gate at Butcher Jones Rec Area at 8:30am.
> >Get on the trail by 9:00am. Hopefully get the SUV out before sundown.
> >The second cove is a long way from the green gate!
> >
> >PS. If you want to try tires, the SUV is a mid-80s Pathfinder, 6-bolt
> >wheels and will most likely require metric lug nuts.
> >
> >Linda
> >
> >linda luik wrote:
> >>
> >> Well, so far it looks like we have a pretty good turnout. I will post
> >> this as trail ride for Saturday, Dec 29, if that's okay with everyone.
I
> >> will contact the FS with the date. Meet at Butcher Jones at 9:00-9:30am
> >> and go from there. I hope it doesn't rain!
> >>
> >> Sign ups so far are:
> >>
> >> LenS
> >> JohnH
> >> DougB
> >> GaryH
> >> RobertH
> >> CharlesB
> >> SteveG
> >> ScottN
> >>
> >> LindaL
>
>
38382 From: AzVJC Website <tomasr@a...>
Date: Fri Dec 28, 2001 7:52pm
Subject: [TR] Unspecified - Monday, December 31, 2001
Hello All,
Roger Tomas is leading an Unspecified trail run on Monday, December 31, 2001.
When: 9:00am
Where: Mile marker 11 on Carefree Highway (aka SR74).
This is about 10 miles west of Lake Pleasant.
Rating: None
Length: Maybe 3-5 hours depending
CB Channel: 4
This trail run will be to the old P4W Ranch out west of
Lake Pleasant. This area has a variety - hill climbs,
ledges, rocks, notches, off-camber, etc. To do all of the
obstacles, I recommend front and rear lockers, decent
clearance, and 33" or bigger mud tread tires. Lesser
set-ups can take some bypasses but I don't recommend stock
rigs.
We'll meet at the dirt road (aka the haul road due to its
use by a sand and gravel company?) on the north side of SR74
near mile marker 11. Once everyone is there, we'll travel
another mile or so down the freeway before leaving pavement.
Click Here To Add Your Name to the Sign Up List
Thank You,
- The AzVJC Website
38383 From: Ross Skinner <rskinner@s...>
Date: Fri Dec 28, 2001 7:46pm
Subject: Sorry-Axel Alley photos
I don't have many but Webshots is down on their community site. When it gets
back up I will put them up.
Ross
38384 From: <sanfordtm@a...>
Date: Fri Dec 28, 2001 3:11pm
Subject: Re: [TR] Unspecified - Monday, December 31, 2001
I am taking a group out tomorrow into the Santa Ritas, please reply
520-320-5858
38385 From: Bill Mish <yldkat55@h...>
Date: Fri Dec 28, 2001 8:17pm
Subject: Re: Sorry-Axel Alley photos
Loaded some pics of your Jeep that Joe posted to your Photo folder on AZX4W.
Bill Mish
1955 Willys CJ3B
----- Original Message -----
From: "Ross Skinner" <rskinner@s...>
To: "AZVJC (E-mail)" <az_vjc@yahoogroups.com>
Sent: Friday, December 28, 2001 8:46 PM
Subject: [az_vjc] Sorry-Axel Alley photos
> I don't have many but Webshots is down on their community site. When it
gets
> back up I will put them up.
> Ross
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
38386 From: rrichards13 <rrichards13@y...>
Date: Fri Dec 28, 2001 8:17pm
Subject: Re: [TR] Unspecified - Monday, December 31, 2001
--- In az_vjc@y..., AzVJC Website <tomasr@a...> wrote:
> Isn't this the area where the Spook Rally is held, If so, great
place to go.
Randy
99Tj
38387 From: AzVJC Website <azvjc@a...>
Date: Fri Dec 28, 2001 8:23pm
Subject: [FS] TJ OEM Side Steps
Price: $50
Contact: 480-510-5961
I have a set of the original side steps that come on a TJ. I bought them in June from Jeep. I just got ORF side steps and want to sell the originals. They are in perfect condition. No scratches, dents, cracks or anything else. I have all mounting hardware. No drilling required, bolts right to the frame. Call or email with questions.
Barry Goodman
38388 From: <Kilr650@a...>
Date: Fri Dec 28, 2001 3:26pm
Subject: Re: [TR] Unspecified - Monday, December 31, 2001
Tim,
I'm the one who called you last night. I still plan to meet at your
house at 9 am Saturday. If others plan to go and your house is not good for
them then maybe we can meet them at the southwest corner of I-10/Houghton at
9:30-9:45am.
Eddie
'98 TJ SE
320-0954
38389 From: <Kilr650@a...>
Date: Fri Dec 28, 2001 3:33pm
Subject: Re: cold feet?
You can also try using a trouble light with a 100w bulb if a block
heater is not available. This worked for my Montero when I visited my brother
in Gunnison, CO at -20. Just place the light directly underneath the oil pan
and make sure nothing will drip onto it.
Eddie
'98 TJ SE
38390 From: Nick <nnote@a...>
Date: Fri Dec 28, 2001 8:42pm
Subject: Re: Brand New D30 Lock-Right for sale
You'll love the Ox! It really isn't to hard to self install either.
Nick
----- Original Message -----
From: "flexyxj" <flexyxj98@m...>
To: <az_vjc@yahoogroups.com>
Sent: Friday, December 28, 2001 7:31 PM
Subject: [az_vjc] Brand New D30 Lock-Right for sale
> Well santa must not have checked his list twice otherwise he would
> have known that I have an OX in my D30...So I now have a brand new in
> the box Lock-Right for sale...would like to see 225.00 for it....
>
>
> P.S. This $ will be going to what santa SHOULD have
> brought..MasterCraft seats for my XJ...so help me out here....:)
>
>
> FlexyXJ
>
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
38391 From: jeep108 <jeep108@h...>
Date: Fri Dec 28, 2001 9:10pm
Subject: Re: Nice trail write-up
I especially like the the second picture,the one with my jeep in it.
Ken U
--- In az_vjc@y..., "paparoach85251" <lespaparoach@m...> wrote:
> I just read this guys write-up of his recent run through Martinez
> Canyon on JU. It's nice to see what out-of-towners think about our
> area trails. We probably sometimes take for granted the great
> wheelin' we have in our state. Check it out, its full of spectacular
> photos.
> http://www.gdi-jeepheads.com/Arizona2b.htm
>
> Les
38392 From: <Her1stJeep@a...>
Date: Fri Dec 28, 2001 4:19pm
Subject: Re: [FS] Assorted TJ Stuff
Rick did you sell the Acrylic Bikini Top yet? We would love to have it. Chris's broke.
Jannelle
38393 From: flexyxj <flexyxj98@m...>
Date: Fri Dec 28, 2001 9:23pm
Subject: Re: Brand New D30 Lock-Right for sale
--- In az_vjc@y..., "Nick" <nnote@a...> wrote:
> You'll love the Ox! It really isn't to hard to self install either.
> Nick
>
> ----- Original Message -----
> From: "flexyxj" <flexyxj98@m...>
> To: <az_vjc@y...>
> Sent: Friday, December 28, 2001 7:31 PM
> Subject: [az_vjc] Brand New D30 Lock-Right for sale
>
>
> > Well santa must not have checked his list twice otherwise he would
> > have known that I have an OX in my D30...So I now have a brand
new in
> > the box Lock-Right for sale...would like to see 225.00 for it....
> >
> >
> > P.S. This $ will be going to what santa SHOULD have
> > brought..MasterCraft seats for my XJ...so help me out here....:)
> >
> >
> > FlexyXJ
> >
> >
> >
> >
> > Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
> >
> >
Nick, Actually I do love the OX...It has been in my jeep scince the
lift/axles/gears/blah, blah blah was done....HOWEVER....I have set up
MANY sets of gears before (used to be part of my job
description..yuck) and I must say ..the OX was NOT as easy as it
should have been for a full case locker...In fact it actually
SUCKED....talked to the people at OX and they informed me that "a few
problems with the locker has surfaced BUT they have been remedied"
Like no pin for where the cable goes into the shifter, and the ring
gear side of the carrier was machined "slightly" too large "but all
you have to do is smooth it with some emery cloth" and so
on....Love the function and stoutness of the OX but IMHO I dont think
that I would do it again.......
FlexyXJ
38394 From: paparoach85251 <lespaparoach@m...>
Date: Fri Dec 28, 2001 9:24pm
Subject: Re: Nice trail write-up
Ken,
I apologize for not recognizing your YJ. That is a great picture.
Les
--- In az_vjc@y..., "jeep108" <jeep108@h...> wrote:
> I especially like the the second picture,the one with my jeep in it.
>
> Ken U
>
> --- In az_vjc@y..., "paparoach85251" <lespaparoach@m...> wrote:
> > I just read this guys write-up of his recent run through Martinez
> > Canyon on JU. It's nice to see what out-of-towners think about
our
> > area trails. We probably sometimes take for granted the great
> > wheelin' we have in our state. Check it out, its full of
spectacular
> > photos.
> > http://www.gdi-jeepheads.com/Arizona2b.htm
> >
> > Les
38395 From: Len Sullivan <kermit@e...>
Date: Fri Dec 28, 2001 9:25pm
Subject: SUV Pull tomorrow - whole or in pieces?
Any thoughts on whether or not the SUV in Cove 2 will need to be sectioned
to get it out? I don't have a hot wrench, but I will be bringing my
sawzall.
Also, am I correct that we'll have a big Cummins diesel available for the
heavy pulling?
Len
38396 From: jeep108 <jeep108@h...>
Date: Fri Dec 28, 2001 9:52pm
Subject: willys on ebay
Theres an old willys pu on ebay.I think it would make a cool project
for someone.It is item #599790346 if anyone is interested.
Ken U
38397 From: outlaw85207 <jwarren@c...>
Date: Fri Dec 28, 2001 9:55pm
Subject: test
test
38398 From: wisardd1 <Wisard1@e...>
Date: Fri Dec 28, 2001 11:59pm
Subject: Re: Nice trail write-up
Thank you Les, you are much too kind. If you go to the main page you
will also find an article on Upper Woodpecker, Jackhammer, and in the
next couple of weeks, Isham Canyon in California. Other than that, I
am off to Truckhaven this weekend, but I wish I was in Arizona!
Wisard1
aka dale
http://www.gdi-jeepheads.com/Arizona2b.htm
--- In az_vjc@y..., "paparoach85251" <lespaparoach@m...> wrote:
> I just read this guys write-up of his recent run through Martinez
> Canyon on JU. It's nice to see what out-of-towners think about our
> area trails. We probably sometimes take for granted the great
> wheelin' we have in our state. Check it out, its full of
spectacular
> photos.
> http://www.gdi-jeepheads.com/Arizona2b.htm
>
> Les
38399 From: wisardd1 <Wisard1@e...>
Date: Sat Dec 29, 2001 0:02am
Subject: Re: Nice trail write-up
Oh by the way, this is the main webpage
WWW.Gdi-Jeepheads.Com
dale
--- In az_vjc@y..., "wisardd1" <Wisard1@e...> wrote:
> Thank you Les, you are much too kind. If you go to the main page
you
> will also find an article on Upper Woodpecker, Jackhammer, and in
the
> next couple of weeks, Isham Canyon in California. Other than that,
I
> am off to Truckhaven this weekend, but I wish I was in Arizona!
>
> Wisard1
> aka dale
> http://www.gdi-jeepheads.com/Arizona2b.htm
>
> --- In az_vjc@y..., "paparoach85251" <lespaparoach@m...> wrote:
> > I just read this guys write-up of his recent run through Martinez
> > Canyon on JU. It's nice to see what out-of-towners think about
our
> > area trails. We probably sometimes take for granted the great
> > wheelin' we have in our state. Check it out, its full of
> spectacular
> > photos.
> > http://www.gdi-jeepheads.com/Arizona2b.htm
> >
> > Les
38400 From: mrwardj <martinida@a...>
Date: Sat Dec 29, 2001 3:06am
Subject: Info/Help wanted::Rear axle swap
Well I have finally decided to fix my axle by swapping it out. I
currently have the D35c and was wondering should I go D44, D60 or
ford 9"? I am also going to re-gear and do a 1" body lift. Is this
job one I can handle by myself? I can turn a wrench, but I have
never done gear work. I am looking for some insight from individuals
who have gone before.
What are the requirements? time, tools, parts, and how much beer do
I need to get for all of you to stop by and help. ;) Any input
would be appreciated.
Martin
ps - the beer will be after the mods are done. :O)
38401 From: Rick Hall <rnealh@y...>
Date: Sat Dec 29, 2001 4:51am
Subject: Re: [FS] Assorted TJ Stuff
Still have it. I live in Mesa near Recker & Thomas
(Red Mountain Ranch) my number is 4802058289. Should
be home most of Saturday taking down the Xmas stuff.
Rick
--- Her1stJeep@a... wrote:
> Rick did you sell the Acrylic Bikini Top yet? We
> would love to have it.
> Chris's broke.
>
> Jannelle
>
>
__________________________________________________
Do You Yahoo!?
Send your FREE holiday greetings online!
http://greetings.yahoo.com
38402 From: jeepin_in_az <jeepin_in_az@y...>
Date: Sat Dec 29, 2001 5:29am
Subject: Re: Need Control Arm Bushings
Hey John,
I have all 4 of my stock LCA's, You can have them. Sorry, was
working all day Friday on James's SYE, so theis is the first chance I
got to see your message.
Mike 480-628-0204
--- In az_vjc@y..., Chris Krieg <rv6a@m...> wrote:
> John, where are you located. I know Stu has a pair but he is on the
west
> side. I'm down in SE Chandler (Pecos and Cooper) and have 2 of the
big rear
> stock control arm bushings. They were Joe West's but he left them
for me. I
> can't use them because I have the Tera arms.
>
> Let me know
>
> Chris Krieg
> 480-917-9100
>
> > From: "jb_wrnglr" <JNB4PLS@a...>
> > Reply-To: az_vjc@y...
> > Date: Fri, 28 Dec 2001 23:45:43 -0000
> > To: az_vjc@y...
> > Subject: [az_vjc] Need Control Arm Bushings
> >
> > OK. I've exhausted all of my options for getting these from RE
> > timely or from a local dealership as they too have to order them.
> > Does anyone have their old stock control arms from their TJ that
have
> > the bushings in them, and are you willing to part with them? I
would
> > love to be able to go wheeling this weekend but without the
bushing
> > replacement it's definitely no go. I need just two bushings.
> >
> > Thanks in advance for any and all help.
> >
> > Best Regards,
> >
> > John Butler
> > Cell: (602) 432-0173
> >
> >
> >
> >
> > Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
> >
> >
38378 From: Len Sullivan <kermit@e...>
Date: Fri Dec 28, 2001 6:50pm
Subject: Re: SUV Pull is ON for Dec 29!!!!
Hi all
I'm still going to be there tomorrow, but it looks like I may be a bit late.
Don't wait for me at the gate.....I'll meet you in Cove 2.
Len
-----Original Message-----
From: linda luik <minihummer@w...>
To: Len Sullivan <kermit@e...>; Halverson <byrnec@q...>;
Nixon, Scott <scnix1@h...>; DougB <azjeep@h...>; Gary Holmes
<Niitoyis@w...>; Robert Holmes <flamable_liquid@h...>;
Bab****, Charles H <charles.h.bab****@i...>; az_vjc
<az_vjc@egroups.com>; graham, steve <stevegraham@w...>
Date: Saturday, December 22, 2001 5:21 PM
Subject: SUV Pull is ON for Dec 29!!!!
>Just want to let y'all know. Steve and I took a trip out there this
>morning and the burned up SUV is still in the 2nd Cove. We hi-lifted the
>rear to see if the axle would turn. We could not get it to pudge so I
>doubt that putting tires on it will do much good. The roof is caved in.
>
>Steve thinks that most of the hauling will need to be done with chain.
>The engine hood needs to be cut off. The body needs to be flipped on its
>roof.
>
>We selected what we think is the easiest route. Two uphills, two
>downhills. All are relativley easy slopes (lot of moguls of course .. we
>can't make it too easy) and there's a lot of soft sand trail to drag the
>SUV through.
>
>The 2nd cove is in pretty bad shape. We didn't go to the first cove, but
>it is probably even more trashed. The area inside the green gate is
>really bad.
>
>Hope to see you out there!
>
>December 29. Meet by the green gate at Butcher Jones Rec Area at 8:30am.
>Get on the trail by 9:00am. Hopefully get the SUV out before sundown.
>The second cove is a long way from the green gate!
>
>PS. If you want to try tires, the SUV is a mid-80s Pathfinder, 6-bolt
>wheels and will most likely require metric lug nuts.
>
>Linda
>
>linda luik wrote:
>>
>> Well, so far it looks like we have a pretty good turnout. I will post
>> this as trail ride for Saturday, Dec 29, if that's okay with everyone. I
>> will contact the FS with the date. Meet at Butcher Jones at 9:00-9:30am
>> and go from there. I hope it doesn't rain!
>>
>> Sign ups so far are:
>>
>> LenS
>> JohnH
>> DougB
>> GaryH
>> RobertH
>> CharlesB
>> SteveG
>> ScottN
>>
>> LindaL
--------------------------------------------------------------------------------
ADVERTISEMENT
38379 From: <JNB4PLS@a...>
Date: Fri Dec 28, 2001 2:01pm
Subject: Re: Need Control Arm Bushings
Ditto, and I'm sure that you meant TRAILS, .........right Stu? ;-)
Best Regards,
John
38380 From: Stu Olson <solson8@q...>
Date: Fri Dec 28, 2001 7:11pm
Subject: RE: Need Control Arm Bushings
Hmmmm.....must have been some kind of suppressed thought thing....say, did I
ever tell you about this one bachelor party? LOL
Stu
Stu Olson
www.stu-offroad.com
-----Original Message-----
From: JNB4PLS@a... [mailto:JNB4PLS@a...]
Sent: Friday, December 28, 2001 8:02 PM
To: az_vjc@yahoogroups.com
Subject: Re: [az_vjc] Need Control Arm Bushings
Ditto, and I'm sure that you meant TRAILS, .........right Stu? ;-)
Best Regards,
John
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
38381 From: Halverson <byrnec@q...>
Date: Fri Dec 28, 2001 7:26pm
Subject: Re: SUV Pull is ON for Dec 29!!!!
WE won't be able to make it as we got the stomach flu-hope it goes well.
John Halverson
----- Original Message -----
From: "Len Sullivan" <kermit@e...>
To: <minihummer@w...>; "Halverson" <byrnec@q...>; "Nixon,
Scott" <scnix1@h...>; "DougB" <azjeep@h...>; "Gary Holmes"
<Niitoyis@w...>; "Robert Holmes" <flamable_liquid@h...>;
"Bab****, Charles H" <charles.h.bab****@i...>; "az_vjc"
<az_vjc@egroups.com>; "graham, steve" <stevegraham@w...>
Sent: Friday, December 28, 2001 7:50 PM
Subject: Re: SUV Pull is ON for Dec 29!!!!
> Hi all
>
> I'm still going to be there tomorrow, but it looks like I may be a bit
late.
> Don't wait for me at the gate.....I'll meet you in Cove 2.
>
> Len
>
>
>
> -----Original Message-----
> From: linda luik <minihummer@w...>
> To: Len Sullivan <kermit@e...>; Halverson <byrnec@q...>;
> Nixon, Scott <scnix1@h...>; DougB <azjeep@h...>; Gary Holmes
> <Niitoyis@w...>; Robert Holmes <flamable_liquid@h...>;
> Bab****, Charles H <charles.h.bab****@i...>; az_vjc
> <az_vjc@egroups.com>; graham, steve <stevegraham@w...>
> Date: Saturday, December 22, 2001 5:21 PM
> Subject: SUV Pull is ON for Dec 29!!!!
>
>
> >Just want to let y'all know. Steve and I took a trip out there this
> >morning and the burned up SUV is still in the 2nd Cove. We hi-lifted the
> >rear to see if the axle would turn. We could not get it to pudge so I
> >doubt that putting tires on it will do much good. The roof is caved in.
> >
> >Steve thinks that most of the hauling will need to be done with chain.
> >The engine hood needs to be cut off. The body needs to be flipped on its
> >roof.
> >
> >We selected what we think is the easiest route. Two uphills, two
> >downhills. All are relativley easy slopes (lot of moguls of course .. we
> >can't make it too easy) and there's a lot of soft sand trail to drag the
> >SUV through.
> >
> >The 2nd cove is in pretty bad shape. We didn't go to the first cove, but
> >it is probably even more trashed. The area inside the green gate is
> >really bad.
> >
> >Hope to see you out there!
> >
> >December 29. Meet by the green gate at Butcher Jones Rec Area at 8:30am.
> >Get on the trail by 9:00am. Hopefully get the SUV out before sundown.
> >The second cove is a long way from the green gate!
> >
> >PS. If you want to try tires, the SUV is a mid-80s Pathfinder, 6-bolt
> >wheels and will most likely require metric lug nuts.
> >
> >Linda
> >
> >linda luik wrote:
> >>
> >> Well, so far it looks like we have a pretty good turnout. I will post
> >> this as trail ride for Saturday, Dec 29, if that's okay with everyone.
I
> >> will contact the FS with the date. Meet at Butcher Jones at 9:00-9:30am
> >> and go from there. I hope it doesn't rain!
> >>
> >> Sign ups so far are:
> >>
> >> LenS
> >> JohnH
> >> DougB
> >> GaryH
> >> RobertH
> >> CharlesB
> >> SteveG
> >> ScottN
> >>
> >> LindaL
>
>
38382 From: AzVJC Website <tomasr@a...>
Date: Fri Dec 28, 2001 7:52pm
Subject: [TR] Unspecified - Monday, December 31, 2001
Hello All,
Roger Tomas is leading an Unspecified trail run on Monday, December 31, 2001.
When: 9:00am
Where: Mile marker 11 on Carefree Highway (aka SR74).
This is about 10 miles west of Lake Pleasant.
Rating: None
Length: Maybe 3-5 hours depending
CB Channel: 4
This trail run will be to the old P4W Ranch out west of
Lake Pleasant. This area has a variety - hill climbs,
ledges, rocks, notches, off-camber, etc. To do all of the
obstacles, I recommend front and rear lockers, decent
clearance, and 33" or bigger mud tread tires. Lesser
set-ups can take some bypasses but I don't recommend stock
rigs.
We'll meet at the dirt road (aka the haul road due to its
use by a sand and gravel company?) on the north side of SR74
near mile marker 11. Once everyone is there, we'll travel
another mile or so down the freeway before leaving pavement.
Click Here To Add Your Name to the Sign Up List
Thank You,
- The AzVJC Website
38383 From: Ross Skinner <rskinner@s...>
Date: Fri Dec 28, 2001 7:46pm
Subject: Sorry-Axel Alley photos
I don't have many but Webshots is down on their community site. When it gets
back up I will put them up.
Ross
38384 From: <sanfordtm@a...>
Date: Fri Dec 28, 2001 3:11pm
Subject: Re: [TR] Unspecified - Monday, December 31, 2001
I am taking a group out tomorrow into the Santa Ritas, please reply
520-320-5858
38385 From: Bill Mish <yldkat55@h...>
Date: Fri Dec 28, 2001 8:17pm
Subject: Re: Sorry-Axel Alley photos
Loaded some pics of your Jeep that Joe posted to your Photo folder on AZX4W.
Bill Mish
1955 Willys CJ3B
----- Original Message -----
From: "Ross Skinner" <rskinner@s...>
To: "AZVJC (E-mail)" <az_vjc@yahoogroups.com>
Sent: Friday, December 28, 2001 8:46 PM
Subject: [az_vjc] Sorry-Axel Alley photos
> I don't have many but Webshots is down on their community site. When it
gets
> back up I will put them up.
> Ross
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
38386 From: rrichards13 <rrichards13@y...>
Date: Fri Dec 28, 2001 8:17pm
Subject: Re: [TR] Unspecified - Monday, December 31, 2001
--- In az_vjc@y..., AzVJC Website <tomasr@a...> wrote:
> Isn't this the area where the Spook Rally is held, If so, great
place to go.
Randy
99Tj
38387 From: AzVJC Website <azvjc@a...>
Date: Fri Dec 28, 2001 8:23pm
Subject: [FS] TJ OEM Side Steps
Price: $50
Contact: 480-510-5961
I have a set of the original side steps that come on a TJ. I bought them in June from Jeep. I just got ORF side steps and want to sell the originals. They are in perfect condition. No scratches, dents, cracks or anything else. I have all mounting hardware. No drilling required, bolts right to the frame. Call or email with questions.
Barry Goodman
38388 From: <Kilr650@a...>
Date: Fri Dec 28, 2001 3:26pm
Subject: Re: [TR] Unspecified - Monday, December 31, 2001
Tim,
I'm the one who called you last night. I still plan to meet at your
house at 9 am Saturday. If others plan to go and your house is not good for
them then maybe we can meet them at the southwest corner of I-10/Houghton at
9:30-9:45am.
Eddie
'98 TJ SE
320-0954
38389 From: <Kilr650@a...>
Date: Fri Dec 28, 2001 3:33pm
Subject: Re: cold feet?
You can also try using a trouble light with a 100w bulb if a block
heater is not available. This worked for my Montero when I visited my brother
in Gunnison, CO at -20. Just place the light directly underneath the oil pan
and make sure nothing will drip onto it.
Eddie
'98 TJ SE
38390 From: Nick <nnote@a...>
Date: Fri Dec 28, 2001 8:42pm
Subject: Re: Brand New D30 Lock-Right for sale
You'll love the Ox! It really isn't to hard to self install either.
Nick
----- Original Message -----
From: "flexyxj" <flexyxj98@m...>
To: <az_vjc@yahoogroups.com>
Sent: Friday, December 28, 2001 7:31 PM
Subject: [az_vjc] Brand New D30 Lock-Right for sale
> Well santa must not have checked his list twice otherwise he would
> have known that I have an OX in my D30...So I now have a brand new in
> the box Lock-Right for sale...would like to see 225.00 for it....
>
>
> P.S. This $ will be going to what santa SHOULD have
> brought..MasterCraft seats for my XJ...so help me out here....:)
>
>
> FlexyXJ
>
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
38391 From: jeep108 <jeep108@h...>
Date: Fri Dec 28, 2001 9:10pm
Subject: Re: Nice trail write-up
I especially like the the second picture,the one with my jeep in it.
Ken U
--- In az_vjc@y..., "paparoach85251" <lespaparoach@m...> wrote:
> I just read this guys write-up of his recent run through Martinez
> Canyon on JU. It's nice to see what out-of-towners think about our
> area trails. We probably sometimes take for granted the great
> wheelin' we have in our state. Check it out, its full of spectacular
> photos.
> http://www.gdi-jeepheads.com/Arizona2b.htm
>
> Les
38392 From: <Her1stJeep@a...>
Date: Fri Dec 28, 2001 4:19pm
Subject: Re: [FS] Assorted TJ Stuff
Rick did you sell the Acrylic Bikini Top yet? We would love to have it. Chris's broke.
Jannelle
38393 From: flexyxj <flexyxj98@m...>
Date: Fri Dec 28, 2001 9:23pm
Subject: Re: Brand New D30 Lock-Right for sale
--- In az_vjc@y..., "Nick" <nnote@a...> wrote:
> You'll love the Ox! It really isn't to hard to self install either.
> Nick
>
> ----- Original Message -----
> From: "flexyxj" <flexyxj98@m...>
> To: <az_vjc@y...>
> Sent: Friday, December 28, 2001 7:31 PM
> Subject: [az_vjc] Brand New D30 Lock-Right for sale
>
>
> > Well santa must not have checked his list twice otherwise he would
> > have known that I have an OX in my D30...So I now have a brand
new in
> > the box Lock-Right for sale...would like to see 225.00 for it....
> >
> >
> > P.S. This $ will be going to what santa SHOULD have
> > brought..MasterCraft seats for my XJ...so help me out here....:)
> >
> >
> > FlexyXJ
> >
> >
> >
> >
> > Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
> >
> >
Nick, Actually I do love the OX...It has been in my jeep scince the
lift/axles/gears/blah, blah blah was done....HOWEVER....I have set up
MANY sets of gears before (used to be part of my job
description..yuck) and I must say ..the OX was NOT as easy as it
should have been for a full case locker...In fact it actually
SUCKED....talked to the people at OX and they informed me that "a few
problems with the locker has surfaced BUT they have been remedied"
Like no pin for where the cable goes into the shifter, and the ring
gear side of the carrier was machined "slightly" too large "but all
you have to do is smooth it with some emery cloth" and so
on....Love the function and stoutness of the OX but IMHO I dont think
that I would do it again.......
FlexyXJ
38394 From: paparoach85251 <lespaparoach@m...>
Date: Fri Dec 28, 2001 9:24pm
Subject: Re: Nice trail write-up
Ken,
I apologize for not recognizing your YJ. That is a great picture.
Les
--- In az_vjc@y..., "jeep108" <jeep108@h...> wrote:
> I especially like the the second picture,the one with my jeep in it.
>
> Ken U
>
> --- In az_vjc@y..., "paparoach85251" <lespaparoach@m...> wrote:
> > I just read this guys write-up of his recent run through Martinez
> > Canyon on JU. It's nice to see what out-of-towners think about
our
> > area trails. We probably sometimes take for granted the great
> > wheelin' we have in our state. Check it out, its full of
spectacular
> > photos.
> > http://www.gdi-jeepheads.com/Arizona2b.htm
> >
> > Les
38395 From: Len Sullivan <kermit@e...>
Date: Fri Dec 28, 2001 9:25pm
Subject: SUV Pull tomorrow - whole or in pieces?
Any thoughts on whether or not the SUV in Cove 2 will need to be sectioned
to get it out? I don't have a hot wrench, but I will be bringing my
sawzall.
Also, am I correct that we'll have a big Cummins diesel available for the
heavy pulling?
Len
38396 From: jeep108 <jeep108@h...>
Date: Fri Dec 28, 2001 9:52pm
Subject: willys on ebay
Theres an old willys pu on ebay.I think it would make a cool project
for someone.It is item #599790346 if anyone is interested.
Ken U
38397 From: outlaw85207 <jwarren@c...>
Date: Fri Dec 28, 2001 9:55pm
Subject: test
test
38398 From: wisardd1 <Wisard1@e...>
Date: Fri Dec 28, 2001 11:59pm
Subject: Re: Nice trail write-up
Thank you Les, you are much too kind. If you go to the main page you
will also find an article on Upper Woodpecker, Jackhammer, and in the
next couple of weeks, Isham Canyon in California. Other than that, I
am off to Truckhaven this weekend, but I wish I was in Arizona!
Wisard1
aka dale
http://www.gdi-jeepheads.com/Arizona2b.htm
--- In az_vjc@y..., "paparoach85251" <lespaparoach@m...> wrote:
> I just read this guys write-up of his recent run through Martinez
> Canyon on JU. It's nice to see what out-of-towners think about our
> area trails. We probably sometimes take for granted the great
> wheelin' we have in our state. Check it out, its full of
spectacular
> photos.
> http://www.gdi-jeepheads.com/Arizona2b.htm
>
> Les
38399 From: wisardd1 <Wisard1@e...>
Date: Sat Dec 29, 2001 0:02am
Subject: Re: Nice trail write-up
Oh by the way, this is the main webpage
WWW.Gdi-Jeepheads.Com
dale
--- In az_vjc@y..., "wisardd1" <Wisard1@e...> wrote:
> Thank you Les, you are much too kind. If you go to the main page
you
> will also find an article on Upper Woodpecker, Jackhammer, and in
the
> next couple of weeks, Isham Canyon in California. Other than that,
I
> am off to Truckhaven this weekend, but I wish I was in Arizona!
>
> Wisard1
> aka dale
> http://www.gdi-jeepheads.com/Arizona2b.htm
>
> --- In az_vjc@y..., "paparoach85251" <lespaparoach@m...> wrote:
> > I just read this guys write-up of his recent run through Martinez
> > Canyon on JU. It's nice to see what out-of-towners think about
our
> > area trails. We probably sometimes take for granted the great
> > wheelin' we have in our state. Check it out, its full of
> spectacular
> > photos.
> > http://www.gdi-jeepheads.com/Arizona2b.htm
> >
> > Les
38400 From: mrwardj <martinida@a...>
Date: Sat Dec 29, 2001 3:06am
Subject: Info/Help wanted::Rear axle swap
Well I have finally decided to fix my axle by swapping it out. I
currently have the D35c and was wondering should I go D44, D60 or
ford 9"? I am also going to re-gear and do a 1" body lift. Is this
job one I can handle by myself? I can turn a wrench, but I have
never done gear work. I am looking for some insight from individuals
who have gone before.
What are the requirements? time, tools, parts, and how much beer do
I need to get for all of you to stop by and help. ;) Any input
would be appreciated.
Martin
ps - the beer will be after the mods are done. :O)
38401 From: Rick Hall <rnealh@y...>
Date: Sat Dec 29, 2001 4:51am
Subject: Re: [FS] Assorted TJ Stuff
Still have it. I live in Mesa near Recker & Thomas
(Red Mountain Ranch) my number is 4802058289. Should
be home most of Saturday taking down the Xmas stuff.
Rick
--- Her1stJeep@a... wrote:
> Rick did you sell the Acrylic Bikini Top yet? We
> would love to have it.
> Chris's broke.
>
> Jannelle
>
>
__________________________________________________
Do You Yahoo!?
Send your FREE holiday greetings online!
http://greetings.yahoo.com
38402 From: jeepin_in_az <jeepin_in_az@y...>
Date: Sat Dec 29, 2001 5:29am
Subject: Re: Need Control Arm Bushings
Hey John,
I have all 4 of my stock LCA's, You can have them. Sorry, was
working all day Friday on James's SYE, so theis is the first chance I
got to see your message.
Mike 480-628-0204
--- In az_vjc@y..., Chris Krieg <rv6a@m...> wrote:
> John, where are you located. I know Stu has a pair but he is on the
west
> side. I'm down in SE Chandler (Pecos and Cooper) and have 2 of the
big rear
> stock control arm bushings. They were Joe West's but he left them
for me. I
> can't use them because I have the Tera arms.
>
> Let me know
>
> Chris Krieg
> 480-917-9100
>
> > From: "jb_wrnglr" <JNB4PLS@a...>
> > Reply-To: az_vjc@y...
> > Date: Fri, 28 Dec 2001 23:45:43 -0000
> > To: az_vjc@y...
> > Subject: [az_vjc] Need Control Arm Bushings
> >
> > OK. I've exhausted all of my options for getting these from RE
> > timely or from a local dealership as they too have to order them.
> > Does anyone have their old stock control arms from their TJ that
have
> > the bushings in them, and are you willing to part with them? I
would
> > love to be able to go wheeling this weekend but without the
bushing
> > replacement it's definitely no go. I need just two bushings.
> >
> > Thanks in advance for any and all help.
> >
> > Best Regards,
> >
> > John Butler
> > Cell: (602) 432-0173
> >
> >
> >
> >
> > Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
> >
> >