blooddrive
01-04-2004, 09:21 AM
38353-38377
38353 From: <sanfordtm@a...>
Date: Fri Dec 28, 2001 10:47am
Subject: Fwd: G:\Trail 23.jpg
From: Brown Sanford T TSgt 355 CES/CEHD Sanford.Brown@d...
To: "'sanfordtm@a...'" sanfordtm@a..., "'workoutct@a...'"workoutct@a...
Subject: G:\Trail 23.jpg
Date: Fri, 28 Dec 2001 13:17:30 -0700
<<Trail 23.jpg>>
G:\Trail 23.jpg
Attachment: (image/jpeg) Trail 23.jpg [not stored]
--------------------------------------------------------------------------------
ADVERTISEMENT
38354 From: Marv Miller <mervalt@f...>
Date: Fri Dec 28, 2001 3:45pm
Subject: Re: Re: FR42 on Sunday
Just signed on too. Looking forward to it.
Marv
----- Original Message -----
From: paparoach85251 <lespaparoach@m...>
To: <az_vjc@yahoogroups.com>
Sent: Friday, December 28, 2001 4:16 PM
Subject: [az_vjc] Re: FR42 on Sunday
> Jon,
> I'll be there. See you Sunday. Thanks again for leading.
>
> Les
>
>
> --- In az_vjc@y..., Jon Loveless <jonloveless@m...> wrote:
> > There are too many hands in the pie, so here is the deal. I will
> lead a
> > group on FR42 on Sunday. Anyone interested should meet at the
> PayStation
> > around 9AM to air down, disconnect, and banter. We will leave the
> pay
> > station no later than 9:30 and should be done shortly after lunch.
> My plan
> > is to return via Indian Springs wash. If this is too early for some
> of you
> > then there can be a splinter group leaving at 10AM or so with
> another
> > leader. I think all that is needed on this trail are tow hooks in
> front.
> > The trail is rock free but contains some off-camber stuff and many
> hills
> > with loose sand and granite. Usually makes for a few hard charges
> up hills
> > for those with open f/r diffs. Never a dull moment on FR42.
> >
> > Take Pima Road North from Shea Blvd in Scottsdale about 16 miles to
> Cave
> > Creek Road. Turn right at the stop sign and go about 4.5 miles to
> the
> > turnoff to Bartlett Lake (right turn). Go 14 miles to the pay
> station. If
> > you are coming from the West you can take I17 to Carefree Highway
> and go
> > East. At the end in CareFree go left to Care Free Road, go right
> and pick
> > up the directions at Pima and Care Free.
> >
> >
> > ------------------------------------------
> > Jon Loveless
> > (480)816-6240 office AZ
> > jonloveless@m...
> > ___________________________
>
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
38355 From: DesertJeep <joey@d...>
Date: Fri Dec 28, 2001 3:52pm
Subject: RE: Change to YahooGroups?
All please ignore this it is for DougB. :o
I agree. It will be more cluttered with the mail that should be personally directed. If more people that use their personal email instead of the website would respond we might get it set right.
But I also think if the majority uses the website we may have to live with it. :(
Joey K
93YJ
-----Original Message-----
From: DougB [mailto:azjeep@home.com]
Sent: Friday, December 28, 2001 1:14 PM
To: az_vjc@yahoogroups.com
Subject: Re: [az_vjc] Change to YahooGroups?
They're an AzVJC poll underway to see if the group likes the change. If more respond that they like it, it will be permanent. Go to the Yahoo club site and vote your preference.
Personally, I vote to change it back, to allow for replies to individuals. Right now, every reply goes to the whole group...which clutters the group e-mail (already very voluminous) with replies that would be better directed to an individual. My 2 cents.
Doug
----- Original Message -----
From: Michael Wixom
To: AZ Virtual Gun Club
Cc: AZ Virtual Jeep Club
Sent: Friday, December 28, 2001 8:58 AM
Subject: [az_vjc] Change to YahooGroups?
Why has the web master changed our yahoo groups to keep us from replying directly to the sender of the e-mail? There are many instances when the group does not need the reply just the sender.
Mike Wixom
85 CJ-7
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
38356 From: Stu Olson <solson8@q...>
Date: Fri Dec 28, 2001 3:53pm
Subject: RE: Need Control Arm Bushings
John,
I have a pair of bushings sitting on my garage bench. I'm sure we can
figure out something.
Give me a call 623-846-7624. I live at 67th Ave & Camelback (that is the
west side of town). ;)
Stu
Stu Olson
www.stu-offroad.com
-----Original Message-----
From: jb_wrnglr [mailto:JNB4PLS@a...]
Sent: Friday, December 28, 2001 4:46 PM
To: az_vjc@yahoogroups.com
Subject: [az_vjc] Need Control Arm Bushings
OK. I've exhausted all of my options for getting these from RE
timely or from a local dealership as they too have to order them.
Does anyone have their old stock control arms from their TJ that have
the bushings in them, and are you willing to part with them? I would
love to be able to go wheeling this weekend but without the bushing
replacement it's definitely no go. I need just two bushings.
Thanks in advance for any and all help.
Best Regards,
John Butler
Cell: (602) 432-0173
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
38357 From: Roger Tomas <tomasr@a...>
Date: Fri Dec 28, 2001 4:07pm
Subject: Re: Re: Any interest in easier Saturday run?
P4W (aka the P4W ranch) is an area that the Phoenix 4 Wheelers used
to hold their annual jamboree there. It is roughly 10 miles west of
Lake Pleasant. While there are a lot of trails out there - mostly
easy - the trail we will most likely be taking will entail some
tall and rutted hill climbs, some short and steep climbs, some
rock crawling and some sand washes. It is a nice variety. While
there are bypasses for some of the obstacles, I'd still recommend
some clearance, lockers and mud treads.
-Roger
kcvehr wrote:
>
> I'm interested in a Monday run as well. Not to sound ignorant, but
> what is P4W, and what are the vehicle requirements?
>
> Thanks,
> KC Vehr
> --- In az_vjc@y..., "jeeperaz" <jeeperaz@b...> wrote:
> > I'd be interested in something Monday out at P4W.
> >
> > Regards,
> > Larry
> >
> >
> >
> > --- In az_vjc@y..., "Stu Olson" <solson8@q...> wrote:
> > > Yep....Monday works for me. I am thinking some time around mid
> > morning,
> > > that that we should be done by mid afternoon (assuming no one
> > breaks too
> > > much stuff).
> > >
> > > Stu
> > >
> > > Stu Olson
> > > www.stu-offroad.com
> > >
> > >
> > > -----Original Message-----
> > > From: Roger Tomas [mailto:tomasr@a...]
> > > Sent: Friday, December 28, 2001 4:11 PM
> > > To: az_vjc@y...
> > > Cc: Mike Beach ; Stu Olson
> > > Subject: RE: [az_vjc] Any interest in easier Saturday run?
> > >
> > >
> > > We are talking about Monday, right? I definitely want to do some
> > > wheeling on Monday so P4W would work for me. If you guys are in,
> > > I can post the rub on the club website. Let me know. Also let
> > > me know what time you'd want to meet.
> > >
> > > -Roger
> > >
> > >
> > > >Id be up for that,
> > > >
> > > >MIKE
> > > >
> > > > Stu Olson <solson8@q...> wrote:
> > > >
> > > > P4W.....that sounds fun. Roger? Yes?
> > > >
> > > > Stu Olson
> > > > www.stu-offroad.com
> > > >
> > > >
> > > > -----Original Message-----
> > > > From: Roger Tomas [mailto:tomasr@a...]
> > > > Sent: Friday, December 28, 2001 12:05 PM
> > > > To: az_vjc@y...
> > > > Subject: Re: [az_vjc] Any interest in easier Saturday
> run?
> > > >
> > > > I might be interested in such a run on Monday.
> > > >
> > > > -Roger
> > > >
> > > > jeeperaz wrote:
> > > > >
> > > > > Anyone want to head out to FR42 or P4W ranch?
> > > > >
> > > > > Larry
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
38358 From: Roger Tomas <tomasr@a...>
Date: Fri Dec 28, 2001 4:09pm
Subject: Re: Re: Any interest in easier Saturday run?
Great. I'll probably be posting the run on the club website so
watch for it. If I don't post it, I'll send email.
-Roger
jeeperaz wrote:
>
> I'd be interested in something Monday out at P4W.
>
> Regards,
> Larry
>
> --- In az_vjc@y..., "Stu Olson" <solson8@q...> wrote:
> > Yep....Monday works for me. I am thinking some time around mid
> morning,
> > that that we should be done by mid afternoon (assuming no one
> breaks too
> > much stuff).
> >
> > Stu
> >
> > Stu Olson
> > www.stu-offroad.com
> >
> >
> > -----Original Message-----
> > From: Roger Tomas [mailto:tomasr@a...]
> > Sent: Friday, December 28, 2001 4:11 PM
> > To: az_vjc@y...
> > Cc: Mike Beach ; Stu Olson
> > Subject: RE: [az_vjc] Any interest in easier Saturday run?
> >
> >
> > We are talking about Monday, right? I definitely want to do some
> > wheeling on Monday so P4W would work for me. If you guys are in,
> > I can post the rub on the club website. Let me know. Also let
> > me know what time you'd want to meet.
> >
> > -Roger
> >
> >
> > >Id be up for that,
> > >
> > >MIKE
> > >
> > > Stu Olson <solson8@q...> wrote:
> > >
> > > P4W.....that sounds fun. Roger? Yes?
> > >
> > > Stu Olson
> > > www.stu-offroad.com
> > >
> > >
> > > -----Original Message-----
> > > From: Roger Tomas [mailto:tomasr@a...]
> > > Sent: Friday, December 28, 2001 12:05 PM
> > > To: az_vjc@y...
> > > Subject: Re: [az_vjc] Any interest in easier Saturday run?
> > >
> > > I might be interested in such a run on Monday.
> > >
> > > -Roger
> > >
> > > jeeperaz wrote:
> > > >
> > > > Anyone want to head out to FR42 or P4W ranch?
> > > >
> > > > Larry
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
38359 From: Stu Olson <solson8@q...>
Date: Fri Dec 28, 2001 4:20pm
Subject: RE: Re: Any interest in easier Saturday run?
OK
Stu Olson
www.stu-offroad.com
-----Original Message-----
From: Roger Tomas [mailto:tomasr@a...]
Sent: Friday, December 28, 2001 5:09 PM
To: az_vjc@yahoogroups.com
Subject: Re: [az_vjc] Re: Any interest in easier Saturday run?
Great. I'll probably be posting the run on the club website so
watch for it. If I don't post it, I'll send email.
-Roger
jeeperaz wrote:
>
> I'd be interested in something Monday out at P4W.
>
> Regards,
> Larry
>
> --- In az_vjc@y..., "Stu Olson" <solson8@q...> wrote:
> > Yep....Monday works for me. I am thinking some time around mid
> morning,
> > that that we should be done by mid afternoon (assuming no one
> breaks too
> > much stuff).
> >
> > Stu
> >
> > Stu Olson
> > www.stu-offroad.com
> >
> >
> > -----Original Message-----
> > From: Roger Tomas [mailto:tomasr@a...]
> > Sent: Friday, December 28, 2001 4:11 PM
> > To: az_vjc@y...
> > Cc: Mike Beach ; Stu Olson
> > Subject: RE: [az_vjc] Any interest in easier Saturday run?
> >
> >
> > We are talking about Monday, right? I definitely want to do some
> > wheeling on Monday so P4W would work for me. If you guys are in,
> > I can post the rub on the club website. Let me know. Also let
> > me know what time you'd want to meet.
> >
> > -Roger
> >
> >
> > >Id be up for that,
> > >
> > >MIKE
> > >
> > > Stu Olson <solson8@q...> wrote:
> > >
> > > P4W.....that sounds fun. Roger? Yes?
> > >
> > > Stu Olson
> > > www.stu-offroad.com
> > >
> > >
> > > -----Original Message-----
> > > From: Roger Tomas [mailto:tomasr@a...]
> > > Sent: Friday, December 28, 2001 12:05 PM
> > > To: az_vjc@y...
> > > Subject: Re: [az_vjc] Any interest in easier Saturday run?
> > >
> > > I might be interested in such a run on Monday.
> > >
> > > -Roger
> > >
> > > jeeperaz wrote:
> > > >
> > > > Anyone want to head out to FR42 or P4W ranch?
> > > >
> > > > Larry
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
38360 From: AzVJC Website <azvjc@a...>
Date: Fri Dec 28, 2001 4:29pm
Subject: [TR] Box Canyon - Saturday, December 29, 2001
Hello All,
beer is leading a Box Canyon trail run on Saturday, December 29, 2001.
When: Saturday the 29th
Where: meet at 8:30 florence junction, where 79 splits from 60. Reason being there are two other jeep groups heading out of the usual texaco around that time. This will eliminate confusion.
Rating: 3.0
Length: 1/2 day till noon or so.
CB Channel: 4
just a nice morning jaunt into the canyon to check it out. Read the box canyon write up if you're curious to what it's all about. I ran this two weeks ago and am quite certain a stock jeep can get through with no problems. It should be a relatively quick trip with great photo ops. Excellent trip for the new wheeler or someone trying to get there bearings.
Click Here To Add Your Name to the Sign Up List
Thank You,
- The AzVJC Website
38361 From: Roger Tomas <tomasr@a...>
Date: Fri Dec 28, 2001 4:46pm
Subject: Re: Change to YahooGroups?
Let's see...
Before:
To reply to group, click "Reply All". (Delete individual if desired.)
To reply to individual, click "Reply".
Now:
To reply to group, click "Reply".
To reply to individual, click "Reply" ("Reply All" has same effect.)
Then delete group from To: list.
Then copy individual from email header and paste into To: list.
I've sent replies to individuals for a number of today's posts
and it's a pain in the arse to always have to cut & paste the
originator's email address into the To: field.
For me, the inconvenience of replying to individuals is much
greater than the convenience of replying to the group. Since
I tend to send as many individual replies as I do group replies,
my overall inconvenience has increased.
My 2 cents and yes I voted.
-Roger
38362 From: Stu Olson <solson8@q...>
Date: Fri Dec 28, 2001 4:44pm
Subject: RE: Change to YahooGroups?
AMEN!
Stu Olson
www.stu-offroad.com
-----Original Message-----
From: Roger Tomas [mailto:tomasr@a...]
Sent: Friday, December 28, 2001 5:46 PM
To: az_vjc@yahoogroups.com
Subject: Re: [az_vjc] Change to YahooGroups?
Let's see...
Before:
To reply to group, click "Reply All". (Delete individual if desired.)
To reply to individual, click "Reply".
Now:
To reply to group, click "Reply".
To reply to individual, click "Reply" ("Reply All" has same effect.)
Then delete group from To: list.
Then copy individual from email header and paste into To: list.
I've sent replies to individuals for a number of today's posts
and it's a pain in the arse to always have to cut & paste the
originator's email address into the To: field.
For me, the inconvenience of replying to individuals is much
greater than the convenience of replying to the group. Since
I tend to send as many individual replies as I do group replies,
my overall inconvenience has increased.
My 2 cents and yes I voted.
-Roger
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
38363 From: Jon Loveless <jonloveless@m...>
Date: Fri Dec 28, 2001 4:48pm
Subject: FR42 on Sunday
For those of you needing directions to Bartlett, I had a couple of road names reversed in the last email. Here is a corrected version. Sorry.
Take Pima Road North from Shea Blvd in Scottsdale about 16 miles to Cave Creek Road. Turn right at the stop sign and go about 4.5 miles to the turnoff to Bartlett Lake (right turn). Go 14 miles to the pay station. If you are coming from the West you can take I17 to Carefree Highway and go East. At the end in CareFree go left to Cave Creek Road, go right and pick up the directions at Pima and Cave Creek.
------------------------------------------
Jon Loveless
(480)816-6240 office AZ
jonloveless@mindspring.com
___________________________
38364 From: <davisrandy2@n...>
Date: Fri Dec 28, 2001 4:50pm
Subject: RE: Jeep Joke
thats just to funny i'm still rolling!!!!
Randy
--
__________________________________________________ ________________
Your favorite stores, helpful shopping tools and great gift ideas. Experience the convenience of buying online with Shop@Netscape! http://shopnow.netscape.com/
Get your own FREE, personal Netscape Mail account today at http://webmail.netscape.com/
38365 From: Mike & Karen Acuna <macunasprint@e...>
Date: Fri Dec 28, 2001 5:02pm
Subject: Re: lets try this again.....48x60 gutter mount roof rack with kc's and hilift mount
Since the bars are Yakima, shouldn't I be able to buy Yakima adapters
that will mount the cross bars to my roof rack?
Mike
Brian Harmon wrote:
> Name: Image004.jpg
> Image004.jpg Type: JPEG Image (image/pjpeg)
> Encoding: base64
38366 From: <sanfordtm@a...>
Date: Fri Dec 28, 2001 0:10pm
Subject: Re: Change to YahooGroups?
Greetings!
Tomorrow morning I am planning a trip into the the scenic Santa Ritas! Call me if you are interested. I am going out for dinner should be back by 8:30 PM. If you haven't been to Gardner and Madera Canyon you will want to make this trip. I will be searching for better trails for a meet I am planning in late March. Mnay old ghost mining camps, mines, springs and if the winter permits a good snow melt with several snow melt creeks.
Tim
520-320-5858
38367 From: weasel_ugs <weaselugs@h...>
Date: Fri Dec 28, 2001 5:12pm
Subject: Re: Change to YahooGroups?
Is this a problem when viewing posts from your e-mail account?I read
the posts from the site and you can change who the message is sent to
when you reply in the "To:" section. Don
38368 From: Joe W <arizonajeep@h...>
Date: Fri Dec 28, 2001 5:31pm
Subject: RE: Need Control Arm Bushings
John,
I also have a pair of bushings I'd be happy to let you have. Someone gave
them to me... I'll pass them on to you and when I need some more; I'll ask
the group. There are enough people out there who have their stock control
arms; I doubt anyone on this group should ever have to pay for new bushings.
Call me at home (480) 325-9420
People... don't throw out your stock control arms... the bushings are good
for us RE armed folk.
Joe West
> -----Original Message-----
> From: jb_wrnglr [mailto:JNB4PLS@a...]
> Sent: Friday, December 28, 2001 4:46 PM
> To: az_vjc@yahoogroups.com
> Subject: [az_vjc] Need Control Arm Bushings
>
>
> OK. I've exhausted all of my options for getting these from RE
> timely or from a local dealership as they too have to order them.
> Does anyone have their old stock control arms from their TJ that have
> the bushings in them, and are you willing to part with them? I would
> love to be able to go wheeling this weekend but without the bushing
> replacement it's definitely no go. I need just two bushings.
>
> Thanks in advance for any and all help.
>
> Best Regards,
>
> John Butler
> Cell: (602) 432-0173
>
>
>
>
> Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
>
>
38369 From: Stu Olson <solson8@q...>
Date: Fri Dec 28, 2001 5:40pm
Subject: RE: Need Control Arm Bushings
Joe,
John stopped by and picked up a pair.
Stu
Stu Olson
www.stu-offroad.com
-----Original Message-----
From: Joe W [mailto:arizonajeep@h...]
Sent: Friday, December 28, 2001 6:32 PM
To: az_vjc@yahoogroups.com
Subject: RE: [az_vjc] Need Control Arm Bushings
John,
I also have a pair of bushings I'd be happy to let you have. Someone gave
them to me... I'll pass them on to you and when I need some more; I'll ask
the group. There are enough people out there who have their stock control
arms; I doubt anyone on this group should ever have to pay for new bushings.
Call me at home (480) 325-9420
People... don't throw out your stock control arms... the bushings are good
for us RE armed folk.
Joe West
> -----Original Message-----
> From: jb_wrnglr [mailto:JNB4PLS@a...]
> Sent: Friday, December 28, 2001 4:46 PM
> To: az_vjc@yahoogroups.com
> Subject: [az_vjc] Need Control Arm Bushings
>
>
> OK. I've exhausted all of my options for getting these from RE
> timely or from a local dealership as they too have to order them.
> Does anyone have their old stock control arms from their TJ that have
> the bushings in them, and are you willing to part with them? I would
> love to be able to go wheeling this weekend but without the bushing
> replacement it's definitely no go. I need just two bushings.
>
> Thanks in advance for any and all help.
>
> Best Regards,
>
> John Butler
> Cell: (602) 432-0173
>
>
>
>
> Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
>
>
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
38370 From: James Towle <James.Towle@a...>
Date: Fri Dec 28, 2001 5:39pm
Subject: SYE in but...
Mike and I got my SYE & driveshaft in but, not his. We will work on his
first thing tomorrow. After my test run I looked down and water was dripping
from my radiator. This kind of stuff happens to me, you get done with a mod
and a maintenance issue comes up. Well, the radiator is ordered.
I have to admit the AA kit from appearances looks easier than Mike's Bayou
Jeep SYE, we will see. What an incredible difference in ride.
The off road test run will be off until we get Mike's done & I get a new
radiator installed.
--James
PS - Thanks to Mike for letting me do mine first ;).
38371 From: Chris Krieg <rv6a@m...>
Date: Fri Dec 28, 2001 5:38pm
Subject: Re: Need Control Arm Bushings
John, where are you located. I know Stu has a pair but he is on the west
side. I'm down in SE Chandler (Pecos and Cooper) and have 2 of the big rear
stock control arm bushings. They were Joe West's but he left them for me. I
can't use them because I have the Tera arms.
Let me know
Chris Krieg
480-917-9100
> From: "jb_wrnglr" <JNB4PLS@a...>
> Reply-To: az_vjc@yahoogroups.com
> Date: Fri, 28 Dec 2001 23:45:43 -0000
> To: az_vjc@yahoogroups.com
> Subject: [az_vjc] Need Control Arm Bushings
>
> OK. I've exhausted all of my options for getting these from RE
> timely or from a local dealership as they too have to order them.
> Does anyone have their old stock control arms from their TJ that have
> the bushings in them, and are you willing to part with them? I would
> love to be able to go wheeling this weekend but without the bushing
> replacement it's definitely no go. I need just two bushings.
>
> Thanks in advance for any and all help.
>
> Best Regards,
>
> John Butler
> Cell: (602) 432-0173
>
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
38372 From: Joe W <arizonajeep@h...>
Date: Fri Dec 28, 2001 5:41pm
Subject: Axle Alley Photographs Revisited...
Hi Gang,
My website was having some problems, but I think I've solved them and I
uploaded larger pictures (kind of the best-of Axle Alley). If you are
interested:
http://members.home.com/joewest2/Offroad_Pictures.htm
Joe West
38373 From: Joe W <arizonajeep@h...>
Date: Fri Dec 28, 2001 5:43pm
Subject: RE: Need Control Arm Bushings
Well... if I'd had been a little quicker on checking my email; I could have
saved him one heck of a trip.
<grin>
Oh well... Stu... if you need any bushings; I have some.
By the way; were the bushings you gave John the stock ones out of my Jeep?
Joe
> -----Original Message-----
> From: Stu Olson [mailto:solson8@q...]
> Sent: Friday, December 28, 2001 6:40 PM
> To: az_vjc@yahoogroups.com
> Subject: RE: [az_vjc] Need Control Arm Bushings
>
>
> Joe,
>
> John stopped by and picked up a pair.
>
> Stu
>
> Stu Olson
> www.stu-offroad.com
>
>
> -----Original Message-----
> From: Joe W [mailto:arizonajeep@h...]
> Sent: Friday, December 28, 2001 6:32 PM
> To: az_vjc@yahoogroups.com
> Subject: RE: [az_vjc] Need Control Arm Bushings
>
>
> John,
>
> I also have a pair of bushings I'd be happy to let you have.
> Someone gave
> them to me... I'll pass them on to you and when I need some
> more; I'll ask
> the group. There are enough people out there who have their
> stock control
> arms; I doubt anyone on this group should ever have to pay
> for new bushings.
>
> Call me at home (480) 325-9420
>
> People... don't throw out your stock control arms... the
> bushings are good
> for us RE armed folk.
>
> Joe West
>
>
> > -----Original Message-----
> > From: jb_wrnglr [mailto:JNB4PLS@a...]
> > Sent: Friday, December 28, 2001 4:46 PM
> > To: az_vjc@yahoogroups.com
> > Subject: [az_vjc] Need Control Arm Bushings
> >
> >
> > OK. I've exhausted all of my options for getting these from RE
> > timely or from a local dealership as they too have to order them.
> > Does anyone have their old stock control arms from their TJ
> that have
> > the bushings in them, and are you willing to part with
> them? I would
> > love to be able to go wheeling this weekend but without the bushing
> > replacement it's definitely no go. I need just two bushings.
> >
> > Thanks in advance for any and all help.
> >
> > Best Regards,
> >
> > John Butler
> > Cell: (602) 432-0173
> >
> >
> >
> >
> > Your use of Yahoo! Groups is subject to
> > http://docs.yahoo.com/info/terms/
> >
> >
>
>
>
>
> Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
38374 From: Stu Olson <solson8@q...>
Date: Fri Dec 28, 2001 5:52pm
Subject: RE: Need Control Arm Bushings
Mine, yours, another friends ?? One control arm looks just like another, to
me.
OK on the trip....but then he could not have seen my disc brake conversion,
up close and personal.
Stu
Stu Olson
www.stu-offroad.com
-----Original Message-----
From: Joe W [mailto:arizonajeep@h...]
Sent: Friday, December 28, 2001 6:43 PM
To: az_vjc@yahoogroups.com
Subject: RE: [az_vjc] Need Control Arm Bushings
Well... if I'd had been a little quicker on checking my email; I could have
saved him one heck of a trip.
<grin>
Oh well... Stu... if you need any bushings; I have some.
By the way; were the bushings you gave John the stock ones out of my Jeep?
Joe
> -----Original Message-----
> From: Stu Olson [mailto:solson8@q...]
> Sent: Friday, December 28, 2001 6:40 PM
> To: az_vjc@yahoogroups.com
> Subject: RE: [az_vjc] Need Control Arm Bushings
>
>
> Joe,
>
> John stopped by and picked up a pair.
>
> Stu
>
> Stu Olson
> www.stu-offroad.com
>
>
> -----Original Message-----
> From: Joe W [mailto:arizonajeep@h...]
> Sent: Friday, December 28, 2001 6:32 PM
> To: az_vjc@yahoogroups.com
> Subject: RE: [az_vjc] Need Control Arm Bushings
>
>
> John,
>
> I also have a pair of bushings I'd be happy to let you have.
> Someone gave
> them to me... I'll pass them on to you and when I need some
> more; I'll ask
> the group. There are enough people out there who have their
> stock control
> arms; I doubt anyone on this group should ever have to pay
> for new bushings.
>
> Call me at home (480) 325-9420
>
> People... don't throw out your stock control arms... the
> bushings are good
> for us RE armed folk.
>
> Joe West
>
>
> > -----Original Message-----
> > From: jb_wrnglr [mailto:JNB4PLS@a...]
> > Sent: Friday, December 28, 2001 4:46 PM
> > To: az_vjc@yahoogroups.com
> > Subject: [az_vjc] Need Control Arm Bushings
> >
> >
> > OK. I've exhausted all of my options for getting these from RE
> > timely or from a local dealership as they too have to order them.
> > Does anyone have their old stock control arms from their TJ
> that have
> > the bushings in them, and are you willing to part with
> them? I would
> > love to be able to go wheeling this weekend but without the bushing
> > replacement it's definitely no go. I need just two bushings.
> >
> > Thanks in advance for any and all help.
> >
> > Best Regards,
> >
> > John Butler
> > Cell: (602) 432-0173
> >
> >
> >
> >
> > Your use of Yahoo! Groups is subject to
> > http://docs.yahoo.com/info/terms/
> >
> >
>
>
>
>
> Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
38375 From: flexyxj <flexyxj98@m...>
Date: Fri Dec 28, 2001 6:31pm
Subject: Brand New D30 Lock-Right for sale
Well santa must not have checked his list twice otherwise he would
have known that I have an OX in my D30...So I now have a brand new in
the box Lock-Right for sale...would like to see 225.00 for it....
P.S. This $ will be going to what santa SHOULD have
brought..MasterCraft seats for my XJ...so help me out here....:)
FlexyXJ
38376 From: <JNB4PLS@a...>
Date: Fri Dec 28, 2001 1:32pm
Subject: Re: Need Control Arm Bushings
By the way Stu's new disc brake conversion is a thing of beauty. Thanks
again Stu.
John
38377 From: Stu Olson <solson8@q...>
Date: Fri Dec 28, 2001 6:48pm
Subject: RE: Need Control Arm Bushings
Thanks John....one of the better mods I've done, IMO.
It was nice seeing you again. We gotta stop meeting like this and try doing
some more tails together! LOL
stu
Stu Olson
www.stu-offroad.com
-----Original Message-----
From: JNB4PLS@a... [mailto:JNB4PLS@a...]
Sent: Friday, December 28, 2001 7:32 PM
To: az_vjc@yahoogroups.com
Subject: Re: [az_vjc] Need Control Arm Bushings
By the way Stu's new disc brake conversion is a thing of beauty. Thanks
again Stu.
John
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
38353 From: <sanfordtm@a...>
Date: Fri Dec 28, 2001 10:47am
Subject: Fwd: G:\Trail 23.jpg
From: Brown Sanford T TSgt 355 CES/CEHD Sanford.Brown@d...
To: "'sanfordtm@a...'" sanfordtm@a..., "'workoutct@a...'"workoutct@a...
Subject: G:\Trail 23.jpg
Date: Fri, 28 Dec 2001 13:17:30 -0700
<<Trail 23.jpg>>
G:\Trail 23.jpg
Attachment: (image/jpeg) Trail 23.jpg [not stored]
--------------------------------------------------------------------------------
ADVERTISEMENT
38354 From: Marv Miller <mervalt@f...>
Date: Fri Dec 28, 2001 3:45pm
Subject: Re: Re: FR42 on Sunday
Just signed on too. Looking forward to it.
Marv
----- Original Message -----
From: paparoach85251 <lespaparoach@m...>
To: <az_vjc@yahoogroups.com>
Sent: Friday, December 28, 2001 4:16 PM
Subject: [az_vjc] Re: FR42 on Sunday
> Jon,
> I'll be there. See you Sunday. Thanks again for leading.
>
> Les
>
>
> --- In az_vjc@y..., Jon Loveless <jonloveless@m...> wrote:
> > There are too many hands in the pie, so here is the deal. I will
> lead a
> > group on FR42 on Sunday. Anyone interested should meet at the
> PayStation
> > around 9AM to air down, disconnect, and banter. We will leave the
> pay
> > station no later than 9:30 and should be done shortly after lunch.
> My plan
> > is to return via Indian Springs wash. If this is too early for some
> of you
> > then there can be a splinter group leaving at 10AM or so with
> another
> > leader. I think all that is needed on this trail are tow hooks in
> front.
> > The trail is rock free but contains some off-camber stuff and many
> hills
> > with loose sand and granite. Usually makes for a few hard charges
> up hills
> > for those with open f/r diffs. Never a dull moment on FR42.
> >
> > Take Pima Road North from Shea Blvd in Scottsdale about 16 miles to
> Cave
> > Creek Road. Turn right at the stop sign and go about 4.5 miles to
> the
> > turnoff to Bartlett Lake (right turn). Go 14 miles to the pay
> station. If
> > you are coming from the West you can take I17 to Carefree Highway
> and go
> > East. At the end in CareFree go left to Care Free Road, go right
> and pick
> > up the directions at Pima and Care Free.
> >
> >
> > ------------------------------------------
> > Jon Loveless
> > (480)816-6240 office AZ
> > jonloveless@m...
> > ___________________________
>
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
38355 From: DesertJeep <joey@d...>
Date: Fri Dec 28, 2001 3:52pm
Subject: RE: Change to YahooGroups?
All please ignore this it is for DougB. :o
I agree. It will be more cluttered with the mail that should be personally directed. If more people that use their personal email instead of the website would respond we might get it set right.
But I also think if the majority uses the website we may have to live with it. :(
Joey K
93YJ
-----Original Message-----
From: DougB [mailto:azjeep@home.com]
Sent: Friday, December 28, 2001 1:14 PM
To: az_vjc@yahoogroups.com
Subject: Re: [az_vjc] Change to YahooGroups?
They're an AzVJC poll underway to see if the group likes the change. If more respond that they like it, it will be permanent. Go to the Yahoo club site and vote your preference.
Personally, I vote to change it back, to allow for replies to individuals. Right now, every reply goes to the whole group...which clutters the group e-mail (already very voluminous) with replies that would be better directed to an individual. My 2 cents.
Doug
----- Original Message -----
From: Michael Wixom
To: AZ Virtual Gun Club
Cc: AZ Virtual Jeep Club
Sent: Friday, December 28, 2001 8:58 AM
Subject: [az_vjc] Change to YahooGroups?
Why has the web master changed our yahoo groups to keep us from replying directly to the sender of the e-mail? There are many instances when the group does not need the reply just the sender.
Mike Wixom
85 CJ-7
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
38356 From: Stu Olson <solson8@q...>
Date: Fri Dec 28, 2001 3:53pm
Subject: RE: Need Control Arm Bushings
John,
I have a pair of bushings sitting on my garage bench. I'm sure we can
figure out something.
Give me a call 623-846-7624. I live at 67th Ave & Camelback (that is the
west side of town). ;)
Stu
Stu Olson
www.stu-offroad.com
-----Original Message-----
From: jb_wrnglr [mailto:JNB4PLS@a...]
Sent: Friday, December 28, 2001 4:46 PM
To: az_vjc@yahoogroups.com
Subject: [az_vjc] Need Control Arm Bushings
OK. I've exhausted all of my options for getting these from RE
timely or from a local dealership as they too have to order them.
Does anyone have their old stock control arms from their TJ that have
the bushings in them, and are you willing to part with them? I would
love to be able to go wheeling this weekend but without the bushing
replacement it's definitely no go. I need just two bushings.
Thanks in advance for any and all help.
Best Regards,
John Butler
Cell: (602) 432-0173
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
38357 From: Roger Tomas <tomasr@a...>
Date: Fri Dec 28, 2001 4:07pm
Subject: Re: Re: Any interest in easier Saturday run?
P4W (aka the P4W ranch) is an area that the Phoenix 4 Wheelers used
to hold their annual jamboree there. It is roughly 10 miles west of
Lake Pleasant. While there are a lot of trails out there - mostly
easy - the trail we will most likely be taking will entail some
tall and rutted hill climbs, some short and steep climbs, some
rock crawling and some sand washes. It is a nice variety. While
there are bypasses for some of the obstacles, I'd still recommend
some clearance, lockers and mud treads.
-Roger
kcvehr wrote:
>
> I'm interested in a Monday run as well. Not to sound ignorant, but
> what is P4W, and what are the vehicle requirements?
>
> Thanks,
> KC Vehr
> --- In az_vjc@y..., "jeeperaz" <jeeperaz@b...> wrote:
> > I'd be interested in something Monday out at P4W.
> >
> > Regards,
> > Larry
> >
> >
> >
> > --- In az_vjc@y..., "Stu Olson" <solson8@q...> wrote:
> > > Yep....Monday works for me. I am thinking some time around mid
> > morning,
> > > that that we should be done by mid afternoon (assuming no one
> > breaks too
> > > much stuff).
> > >
> > > Stu
> > >
> > > Stu Olson
> > > www.stu-offroad.com
> > >
> > >
> > > -----Original Message-----
> > > From: Roger Tomas [mailto:tomasr@a...]
> > > Sent: Friday, December 28, 2001 4:11 PM
> > > To: az_vjc@y...
> > > Cc: Mike Beach ; Stu Olson
> > > Subject: RE: [az_vjc] Any interest in easier Saturday run?
> > >
> > >
> > > We are talking about Monday, right? I definitely want to do some
> > > wheeling on Monday so P4W would work for me. If you guys are in,
> > > I can post the rub on the club website. Let me know. Also let
> > > me know what time you'd want to meet.
> > >
> > > -Roger
> > >
> > >
> > > >Id be up for that,
> > > >
> > > >MIKE
> > > >
> > > > Stu Olson <solson8@q...> wrote:
> > > >
> > > > P4W.....that sounds fun. Roger? Yes?
> > > >
> > > > Stu Olson
> > > > www.stu-offroad.com
> > > >
> > > >
> > > > -----Original Message-----
> > > > From: Roger Tomas [mailto:tomasr@a...]
> > > > Sent: Friday, December 28, 2001 12:05 PM
> > > > To: az_vjc@y...
> > > > Subject: Re: [az_vjc] Any interest in easier Saturday
> run?
> > > >
> > > > I might be interested in such a run on Monday.
> > > >
> > > > -Roger
> > > >
> > > > jeeperaz wrote:
> > > > >
> > > > > Anyone want to head out to FR42 or P4W ranch?
> > > > >
> > > > > Larry
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
38358 From: Roger Tomas <tomasr@a...>
Date: Fri Dec 28, 2001 4:09pm
Subject: Re: Re: Any interest in easier Saturday run?
Great. I'll probably be posting the run on the club website so
watch for it. If I don't post it, I'll send email.
-Roger
jeeperaz wrote:
>
> I'd be interested in something Monday out at P4W.
>
> Regards,
> Larry
>
> --- In az_vjc@y..., "Stu Olson" <solson8@q...> wrote:
> > Yep....Monday works for me. I am thinking some time around mid
> morning,
> > that that we should be done by mid afternoon (assuming no one
> breaks too
> > much stuff).
> >
> > Stu
> >
> > Stu Olson
> > www.stu-offroad.com
> >
> >
> > -----Original Message-----
> > From: Roger Tomas [mailto:tomasr@a...]
> > Sent: Friday, December 28, 2001 4:11 PM
> > To: az_vjc@y...
> > Cc: Mike Beach ; Stu Olson
> > Subject: RE: [az_vjc] Any interest in easier Saturday run?
> >
> >
> > We are talking about Monday, right? I definitely want to do some
> > wheeling on Monday so P4W would work for me. If you guys are in,
> > I can post the rub on the club website. Let me know. Also let
> > me know what time you'd want to meet.
> >
> > -Roger
> >
> >
> > >Id be up for that,
> > >
> > >MIKE
> > >
> > > Stu Olson <solson8@q...> wrote:
> > >
> > > P4W.....that sounds fun. Roger? Yes?
> > >
> > > Stu Olson
> > > www.stu-offroad.com
> > >
> > >
> > > -----Original Message-----
> > > From: Roger Tomas [mailto:tomasr@a...]
> > > Sent: Friday, December 28, 2001 12:05 PM
> > > To: az_vjc@y...
> > > Subject: Re: [az_vjc] Any interest in easier Saturday run?
> > >
> > > I might be interested in such a run on Monday.
> > >
> > > -Roger
> > >
> > > jeeperaz wrote:
> > > >
> > > > Anyone want to head out to FR42 or P4W ranch?
> > > >
> > > > Larry
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
38359 From: Stu Olson <solson8@q...>
Date: Fri Dec 28, 2001 4:20pm
Subject: RE: Re: Any interest in easier Saturday run?
OK
Stu Olson
www.stu-offroad.com
-----Original Message-----
From: Roger Tomas [mailto:tomasr@a...]
Sent: Friday, December 28, 2001 5:09 PM
To: az_vjc@yahoogroups.com
Subject: Re: [az_vjc] Re: Any interest in easier Saturday run?
Great. I'll probably be posting the run on the club website so
watch for it. If I don't post it, I'll send email.
-Roger
jeeperaz wrote:
>
> I'd be interested in something Monday out at P4W.
>
> Regards,
> Larry
>
> --- In az_vjc@y..., "Stu Olson" <solson8@q...> wrote:
> > Yep....Monday works for me. I am thinking some time around mid
> morning,
> > that that we should be done by mid afternoon (assuming no one
> breaks too
> > much stuff).
> >
> > Stu
> >
> > Stu Olson
> > www.stu-offroad.com
> >
> >
> > -----Original Message-----
> > From: Roger Tomas [mailto:tomasr@a...]
> > Sent: Friday, December 28, 2001 4:11 PM
> > To: az_vjc@y...
> > Cc: Mike Beach ; Stu Olson
> > Subject: RE: [az_vjc] Any interest in easier Saturday run?
> >
> >
> > We are talking about Monday, right? I definitely want to do some
> > wheeling on Monday so P4W would work for me. If you guys are in,
> > I can post the rub on the club website. Let me know. Also let
> > me know what time you'd want to meet.
> >
> > -Roger
> >
> >
> > >Id be up for that,
> > >
> > >MIKE
> > >
> > > Stu Olson <solson8@q...> wrote:
> > >
> > > P4W.....that sounds fun. Roger? Yes?
> > >
> > > Stu Olson
> > > www.stu-offroad.com
> > >
> > >
> > > -----Original Message-----
> > > From: Roger Tomas [mailto:tomasr@a...]
> > > Sent: Friday, December 28, 2001 12:05 PM
> > > To: az_vjc@y...
> > > Subject: Re: [az_vjc] Any interest in easier Saturday run?
> > >
> > > I might be interested in such a run on Monday.
> > >
> > > -Roger
> > >
> > > jeeperaz wrote:
> > > >
> > > > Anyone want to head out to FR42 or P4W ranch?
> > > >
> > > > Larry
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
38360 From: AzVJC Website <azvjc@a...>
Date: Fri Dec 28, 2001 4:29pm
Subject: [TR] Box Canyon - Saturday, December 29, 2001
Hello All,
beer is leading a Box Canyon trail run on Saturday, December 29, 2001.
When: Saturday the 29th
Where: meet at 8:30 florence junction, where 79 splits from 60. Reason being there are two other jeep groups heading out of the usual texaco around that time. This will eliminate confusion.
Rating: 3.0
Length: 1/2 day till noon or so.
CB Channel: 4
just a nice morning jaunt into the canyon to check it out. Read the box canyon write up if you're curious to what it's all about. I ran this two weeks ago and am quite certain a stock jeep can get through with no problems. It should be a relatively quick trip with great photo ops. Excellent trip for the new wheeler or someone trying to get there bearings.
Click Here To Add Your Name to the Sign Up List
Thank You,
- The AzVJC Website
38361 From: Roger Tomas <tomasr@a...>
Date: Fri Dec 28, 2001 4:46pm
Subject: Re: Change to YahooGroups?
Let's see...
Before:
To reply to group, click "Reply All". (Delete individual if desired.)
To reply to individual, click "Reply".
Now:
To reply to group, click "Reply".
To reply to individual, click "Reply" ("Reply All" has same effect.)
Then delete group from To: list.
Then copy individual from email header and paste into To: list.
I've sent replies to individuals for a number of today's posts
and it's a pain in the arse to always have to cut & paste the
originator's email address into the To: field.
For me, the inconvenience of replying to individuals is much
greater than the convenience of replying to the group. Since
I tend to send as many individual replies as I do group replies,
my overall inconvenience has increased.
My 2 cents and yes I voted.
-Roger
38362 From: Stu Olson <solson8@q...>
Date: Fri Dec 28, 2001 4:44pm
Subject: RE: Change to YahooGroups?
AMEN!
Stu Olson
www.stu-offroad.com
-----Original Message-----
From: Roger Tomas [mailto:tomasr@a...]
Sent: Friday, December 28, 2001 5:46 PM
To: az_vjc@yahoogroups.com
Subject: Re: [az_vjc] Change to YahooGroups?
Let's see...
Before:
To reply to group, click "Reply All". (Delete individual if desired.)
To reply to individual, click "Reply".
Now:
To reply to group, click "Reply".
To reply to individual, click "Reply" ("Reply All" has same effect.)
Then delete group from To: list.
Then copy individual from email header and paste into To: list.
I've sent replies to individuals for a number of today's posts
and it's a pain in the arse to always have to cut & paste the
originator's email address into the To: field.
For me, the inconvenience of replying to individuals is much
greater than the convenience of replying to the group. Since
I tend to send as many individual replies as I do group replies,
my overall inconvenience has increased.
My 2 cents and yes I voted.
-Roger
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
38363 From: Jon Loveless <jonloveless@m...>
Date: Fri Dec 28, 2001 4:48pm
Subject: FR42 on Sunday
For those of you needing directions to Bartlett, I had a couple of road names reversed in the last email. Here is a corrected version. Sorry.
Take Pima Road North from Shea Blvd in Scottsdale about 16 miles to Cave Creek Road. Turn right at the stop sign and go about 4.5 miles to the turnoff to Bartlett Lake (right turn). Go 14 miles to the pay station. If you are coming from the West you can take I17 to Carefree Highway and go East. At the end in CareFree go left to Cave Creek Road, go right and pick up the directions at Pima and Cave Creek.
------------------------------------------
Jon Loveless
(480)816-6240 office AZ
jonloveless@mindspring.com
___________________________
38364 From: <davisrandy2@n...>
Date: Fri Dec 28, 2001 4:50pm
Subject: RE: Jeep Joke
thats just to funny i'm still rolling!!!!
Randy
--
__________________________________________________ ________________
Your favorite stores, helpful shopping tools and great gift ideas. Experience the convenience of buying online with Shop@Netscape! http://shopnow.netscape.com/
Get your own FREE, personal Netscape Mail account today at http://webmail.netscape.com/
38365 From: Mike & Karen Acuna <macunasprint@e...>
Date: Fri Dec 28, 2001 5:02pm
Subject: Re: lets try this again.....48x60 gutter mount roof rack with kc's and hilift mount
Since the bars are Yakima, shouldn't I be able to buy Yakima adapters
that will mount the cross bars to my roof rack?
Mike
Brian Harmon wrote:
> Name: Image004.jpg
> Image004.jpg Type: JPEG Image (image/pjpeg)
> Encoding: base64
38366 From: <sanfordtm@a...>
Date: Fri Dec 28, 2001 0:10pm
Subject: Re: Change to YahooGroups?
Greetings!
Tomorrow morning I am planning a trip into the the scenic Santa Ritas! Call me if you are interested. I am going out for dinner should be back by 8:30 PM. If you haven't been to Gardner and Madera Canyon you will want to make this trip. I will be searching for better trails for a meet I am planning in late March. Mnay old ghost mining camps, mines, springs and if the winter permits a good snow melt with several snow melt creeks.
Tim
520-320-5858
38367 From: weasel_ugs <weaselugs@h...>
Date: Fri Dec 28, 2001 5:12pm
Subject: Re: Change to YahooGroups?
Is this a problem when viewing posts from your e-mail account?I read
the posts from the site and you can change who the message is sent to
when you reply in the "To:" section. Don
38368 From: Joe W <arizonajeep@h...>
Date: Fri Dec 28, 2001 5:31pm
Subject: RE: Need Control Arm Bushings
John,
I also have a pair of bushings I'd be happy to let you have. Someone gave
them to me... I'll pass them on to you and when I need some more; I'll ask
the group. There are enough people out there who have their stock control
arms; I doubt anyone on this group should ever have to pay for new bushings.
Call me at home (480) 325-9420
People... don't throw out your stock control arms... the bushings are good
for us RE armed folk.
Joe West
> -----Original Message-----
> From: jb_wrnglr [mailto:JNB4PLS@a...]
> Sent: Friday, December 28, 2001 4:46 PM
> To: az_vjc@yahoogroups.com
> Subject: [az_vjc] Need Control Arm Bushings
>
>
> OK. I've exhausted all of my options for getting these from RE
> timely or from a local dealership as they too have to order them.
> Does anyone have their old stock control arms from their TJ that have
> the bushings in them, and are you willing to part with them? I would
> love to be able to go wheeling this weekend but without the bushing
> replacement it's definitely no go. I need just two bushings.
>
> Thanks in advance for any and all help.
>
> Best Regards,
>
> John Butler
> Cell: (602) 432-0173
>
>
>
>
> Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
>
>
38369 From: Stu Olson <solson8@q...>
Date: Fri Dec 28, 2001 5:40pm
Subject: RE: Need Control Arm Bushings
Joe,
John stopped by and picked up a pair.
Stu
Stu Olson
www.stu-offroad.com
-----Original Message-----
From: Joe W [mailto:arizonajeep@h...]
Sent: Friday, December 28, 2001 6:32 PM
To: az_vjc@yahoogroups.com
Subject: RE: [az_vjc] Need Control Arm Bushings
John,
I also have a pair of bushings I'd be happy to let you have. Someone gave
them to me... I'll pass them on to you and when I need some more; I'll ask
the group. There are enough people out there who have their stock control
arms; I doubt anyone on this group should ever have to pay for new bushings.
Call me at home (480) 325-9420
People... don't throw out your stock control arms... the bushings are good
for us RE armed folk.
Joe West
> -----Original Message-----
> From: jb_wrnglr [mailto:JNB4PLS@a...]
> Sent: Friday, December 28, 2001 4:46 PM
> To: az_vjc@yahoogroups.com
> Subject: [az_vjc] Need Control Arm Bushings
>
>
> OK. I've exhausted all of my options for getting these from RE
> timely or from a local dealership as they too have to order them.
> Does anyone have their old stock control arms from their TJ that have
> the bushings in them, and are you willing to part with them? I would
> love to be able to go wheeling this weekend but without the bushing
> replacement it's definitely no go. I need just two bushings.
>
> Thanks in advance for any and all help.
>
> Best Regards,
>
> John Butler
> Cell: (602) 432-0173
>
>
>
>
> Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
>
>
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
38370 From: James Towle <James.Towle@a...>
Date: Fri Dec 28, 2001 5:39pm
Subject: SYE in but...
Mike and I got my SYE & driveshaft in but, not his. We will work on his
first thing tomorrow. After my test run I looked down and water was dripping
from my radiator. This kind of stuff happens to me, you get done with a mod
and a maintenance issue comes up. Well, the radiator is ordered.
I have to admit the AA kit from appearances looks easier than Mike's Bayou
Jeep SYE, we will see. What an incredible difference in ride.
The off road test run will be off until we get Mike's done & I get a new
radiator installed.
--James
PS - Thanks to Mike for letting me do mine first ;).
38371 From: Chris Krieg <rv6a@m...>
Date: Fri Dec 28, 2001 5:38pm
Subject: Re: Need Control Arm Bushings
John, where are you located. I know Stu has a pair but he is on the west
side. I'm down in SE Chandler (Pecos and Cooper) and have 2 of the big rear
stock control arm bushings. They were Joe West's but he left them for me. I
can't use them because I have the Tera arms.
Let me know
Chris Krieg
480-917-9100
> From: "jb_wrnglr" <JNB4PLS@a...>
> Reply-To: az_vjc@yahoogroups.com
> Date: Fri, 28 Dec 2001 23:45:43 -0000
> To: az_vjc@yahoogroups.com
> Subject: [az_vjc] Need Control Arm Bushings
>
> OK. I've exhausted all of my options for getting these from RE
> timely or from a local dealership as they too have to order them.
> Does anyone have their old stock control arms from their TJ that have
> the bushings in them, and are you willing to part with them? I would
> love to be able to go wheeling this weekend but without the bushing
> replacement it's definitely no go. I need just two bushings.
>
> Thanks in advance for any and all help.
>
> Best Regards,
>
> John Butler
> Cell: (602) 432-0173
>
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
38372 From: Joe W <arizonajeep@h...>
Date: Fri Dec 28, 2001 5:41pm
Subject: Axle Alley Photographs Revisited...
Hi Gang,
My website was having some problems, but I think I've solved them and I
uploaded larger pictures (kind of the best-of Axle Alley). If you are
interested:
http://members.home.com/joewest2/Offroad_Pictures.htm
Joe West
38373 From: Joe W <arizonajeep@h...>
Date: Fri Dec 28, 2001 5:43pm
Subject: RE: Need Control Arm Bushings
Well... if I'd had been a little quicker on checking my email; I could have
saved him one heck of a trip.
<grin>
Oh well... Stu... if you need any bushings; I have some.
By the way; were the bushings you gave John the stock ones out of my Jeep?
Joe
> -----Original Message-----
> From: Stu Olson [mailto:solson8@q...]
> Sent: Friday, December 28, 2001 6:40 PM
> To: az_vjc@yahoogroups.com
> Subject: RE: [az_vjc] Need Control Arm Bushings
>
>
> Joe,
>
> John stopped by and picked up a pair.
>
> Stu
>
> Stu Olson
> www.stu-offroad.com
>
>
> -----Original Message-----
> From: Joe W [mailto:arizonajeep@h...]
> Sent: Friday, December 28, 2001 6:32 PM
> To: az_vjc@yahoogroups.com
> Subject: RE: [az_vjc] Need Control Arm Bushings
>
>
> John,
>
> I also have a pair of bushings I'd be happy to let you have.
> Someone gave
> them to me... I'll pass them on to you and when I need some
> more; I'll ask
> the group. There are enough people out there who have their
> stock control
> arms; I doubt anyone on this group should ever have to pay
> for new bushings.
>
> Call me at home (480) 325-9420
>
> People... don't throw out your stock control arms... the
> bushings are good
> for us RE armed folk.
>
> Joe West
>
>
> > -----Original Message-----
> > From: jb_wrnglr [mailto:JNB4PLS@a...]
> > Sent: Friday, December 28, 2001 4:46 PM
> > To: az_vjc@yahoogroups.com
> > Subject: [az_vjc] Need Control Arm Bushings
> >
> >
> > OK. I've exhausted all of my options for getting these from RE
> > timely or from a local dealership as they too have to order them.
> > Does anyone have their old stock control arms from their TJ
> that have
> > the bushings in them, and are you willing to part with
> them? I would
> > love to be able to go wheeling this weekend but without the bushing
> > replacement it's definitely no go. I need just two bushings.
> >
> > Thanks in advance for any and all help.
> >
> > Best Regards,
> >
> > John Butler
> > Cell: (602) 432-0173
> >
> >
> >
> >
> > Your use of Yahoo! Groups is subject to
> > http://docs.yahoo.com/info/terms/
> >
> >
>
>
>
>
> Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
38374 From: Stu Olson <solson8@q...>
Date: Fri Dec 28, 2001 5:52pm
Subject: RE: Need Control Arm Bushings
Mine, yours, another friends ?? One control arm looks just like another, to
me.
OK on the trip....but then he could not have seen my disc brake conversion,
up close and personal.
Stu
Stu Olson
www.stu-offroad.com
-----Original Message-----
From: Joe W [mailto:arizonajeep@h...]
Sent: Friday, December 28, 2001 6:43 PM
To: az_vjc@yahoogroups.com
Subject: RE: [az_vjc] Need Control Arm Bushings
Well... if I'd had been a little quicker on checking my email; I could have
saved him one heck of a trip.
<grin>
Oh well... Stu... if you need any bushings; I have some.
By the way; were the bushings you gave John the stock ones out of my Jeep?
Joe
> -----Original Message-----
> From: Stu Olson [mailto:solson8@q...]
> Sent: Friday, December 28, 2001 6:40 PM
> To: az_vjc@yahoogroups.com
> Subject: RE: [az_vjc] Need Control Arm Bushings
>
>
> Joe,
>
> John stopped by and picked up a pair.
>
> Stu
>
> Stu Olson
> www.stu-offroad.com
>
>
> -----Original Message-----
> From: Joe W [mailto:arizonajeep@h...]
> Sent: Friday, December 28, 2001 6:32 PM
> To: az_vjc@yahoogroups.com
> Subject: RE: [az_vjc] Need Control Arm Bushings
>
>
> John,
>
> I also have a pair of bushings I'd be happy to let you have.
> Someone gave
> them to me... I'll pass them on to you and when I need some
> more; I'll ask
> the group. There are enough people out there who have their
> stock control
> arms; I doubt anyone on this group should ever have to pay
> for new bushings.
>
> Call me at home (480) 325-9420
>
> People... don't throw out your stock control arms... the
> bushings are good
> for us RE armed folk.
>
> Joe West
>
>
> > -----Original Message-----
> > From: jb_wrnglr [mailto:JNB4PLS@a...]
> > Sent: Friday, December 28, 2001 4:46 PM
> > To: az_vjc@yahoogroups.com
> > Subject: [az_vjc] Need Control Arm Bushings
> >
> >
> > OK. I've exhausted all of my options for getting these from RE
> > timely or from a local dealership as they too have to order them.
> > Does anyone have their old stock control arms from their TJ
> that have
> > the bushings in them, and are you willing to part with
> them? I would
> > love to be able to go wheeling this weekend but without the bushing
> > replacement it's definitely no go. I need just two bushings.
> >
> > Thanks in advance for any and all help.
> >
> > Best Regards,
> >
> > John Butler
> > Cell: (602) 432-0173
> >
> >
> >
> >
> > Your use of Yahoo! Groups is subject to
> > http://docs.yahoo.com/info/terms/
> >
> >
>
>
>
>
> Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
38375 From: flexyxj <flexyxj98@m...>
Date: Fri Dec 28, 2001 6:31pm
Subject: Brand New D30 Lock-Right for sale
Well santa must not have checked his list twice otherwise he would
have known that I have an OX in my D30...So I now have a brand new in
the box Lock-Right for sale...would like to see 225.00 for it....
P.S. This $ will be going to what santa SHOULD have
brought..MasterCraft seats for my XJ...so help me out here....:)
FlexyXJ
38376 From: <JNB4PLS@a...>
Date: Fri Dec 28, 2001 1:32pm
Subject: Re: Need Control Arm Bushings
By the way Stu's new disc brake conversion is a thing of beauty. Thanks
again Stu.
John
38377 From: Stu Olson <solson8@q...>
Date: Fri Dec 28, 2001 6:48pm
Subject: RE: Need Control Arm Bushings
Thanks John....one of the better mods I've done, IMO.
It was nice seeing you again. We gotta stop meeting like this and try doing
some more tails together! LOL
stu
Stu Olson
www.stu-offroad.com
-----Original Message-----
From: JNB4PLS@a... [mailto:JNB4PLS@a...]
Sent: Friday, December 28, 2001 7:32 PM
To: az_vjc@yahoogroups.com
Subject: Re: [az_vjc] Need Control Arm Bushings
By the way Stu's new disc brake conversion is a thing of beauty. Thanks
again Stu.
John
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/