blooddrive
01-04-2004, 09:16 AM
38028-38052
38028 From: David R. W. Withers <dr_ww@h...>
Date: Wed Dec 26, 2001 11:33am
Subject: UPDATED Expo ok this is who we have so far
I'm still trying to contact the guy. But I'll insure that the Tickets are at the Gate. I'll keep you guys/gals informed.
John R. 1
Rob Brooks 3
Rob Williams 3
Mike Beach 2
Chris Benner 2
Gary Holmes 2
Scott Thomas 2/3
Crusher 8
Mike Baney 2
Lisa & Barry Bunch 2
Mike and Karen Acuna 5
Les 1
Me 2
TOTAL = 35/36
I'll probably pay for them if I can't work out a deal with the promoter. I'll ask to leave them at the gate. I will also forward the website when I find it again.
David R. W. Withers
Desk: 480.551.4667
Mobile: 480.215.6992
--------------------------------------------------------------------------------
ADVERTISEMENT
38029 From: Joe W <arizonajeep@h...>
Date: Wed Dec 26, 2001 11:33am
Subject: RE: Steelhorse pack rack
Chris,
Before you install the rack, I'd recommend you put a nice fresh coat of paint on it. The paint will help delay the rack's inevitable transformation into ferrous oxide.
Joe West
-----Original Message-----
From: Chris benner [mailto:cbenner@thejeepfiles.com]
Sent: Wednesday, December 26, 2001 11:25 AM
To: hunteroffroad@aol.com; az_vjc@yahoogroups.com
Subject: Re: [az_vjc] Steelhorse pack rack
yeah its the tailgate mounting style, and yeah I can see what you mean, it feels a little flimsy to hold 200lbs.
what ends up breaking? the actual hinge part? do they make heavier duty hinges?
----- Original Message -----
From: hunteroffroad@aol.com
To: az_vjc@yahoogroups.com
Sent: Wednesday, December 26, 2001 12:49 PM
Subject: Re: [az_vjc] Steelhorse pack rack
Is that the rack that mounts to the tail gate or to the hitch? If it mounts to the tail gate, you will want to use some caution, I have no doubts that the rack will hold the listed weight, but I kow the tail gates themsleves can not, for very long. I have fixed ennough to know serious failure can happen. All though, I have noitced that the TJ tail gate is much stronger than the YJ gate.
Take care,
John K
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
38030 From: <hunteroffroad@a...>
Date: Wed Dec 26, 2001 6:41am
Subject: Re: Steelhorse pack rack
I think they do make heavyduty hinges. But for the life of me, I cant remember were I saw them or who had them. They may help. It depends on the mounting style. Different racks mount a little diffrerent. I have seen the hinges fail, and in some cases, it starts to pull the sheet metal away from the tub and I have even had 2 where the brackets pulled thru the sheetmetal of the tail gate. All though, keep in mind, theses have only been YJ and CJs. The worst damage I have seen to the tail gate of TJ has just been some play and looseing of the hinges.
I think the racks are OK, I would just maybe load the sleeping bags back there instead of the cooler.. : ).
Best Regards
John K
38031 From: DesertJeep <joey@d...>
Date: Wed Dec 26, 2001 11:55am
Subject: RE: Re: SYE Install
There you have it. Joe having said that means that leaving it in is the
way to go!
Just kidding. I could not resist. LOL.
If it were mine to do I would yank it out and bench fit the SYE. The
first time. I'd want to do this to learn more of how it works and upside
down with bad angles would be tough. But on my second install I probably
leave it in if possible.
Just my opinion.
Joey K
> -----Original Message-----
> From: Joe W [mailto:arizonajeep@h...]
> Sent: Wednesday, December 26, 2001 12:26 PM
> To: az_vjc@yahoogroups.com
> Subject: RE: [az_vjc] Re: SYE Install
>
>
> Mike,
>
> I would recommend that you pull the transfer case before
> modifying it. I think you'll find the job much easier to do
> that way... and the time to take the transfer case out and
> put it back in is less than 30 minutes. I'd recommend that
> you do yourself a favor and just take it completely out
> before cracking it open.
>
> Joe West
>
> > -----Original Message-----
> > From: jeepin_in_az [mailto:jeepin_in_az@y...]
> > Sent: Wednesday, December 26, 2001 10:35 AM
> > To: az_vjc@yahoogroups.com
> > Subject: [az_vjc] Re: SYE Install
> >
> >
> > Thanks Joe!
> >
> > Mike
> >
> > --- In az_vjc@y..., "Joe W" <arizonajeep@h...> wrote:
> > > Mike,
> > >
> > > I doubt you'll have any problems...but if you run into any on
> > Friday, give
> > > me a call (602) 524-7632. I have the day off and would
> be happy to
> > help.
> > >
> > > Joe West
> > >
> > > > -----Original Message-----
> > > > From: jeepin_in_az [mailto:jeepin_in_az@y...]
> > > > Sent: Wednesday, December 26, 2001 9:57 AM
> > > > To: az_vjc@y...
> > > > Subject: [az_vjc] Re: SYE Install
> > > >
> > > >
> > > > We both go the nice kit, take apart the tcase kind. I was
> > thinking
> > > > of stealing your tcase from Chris....and giving him mine, I only
> > have
> > > > around 20,000 miles.
> > > >
> > > > Mike
> > > >
> > > >
> > > >
> > > >
> > > > --- In az_vjc@y..., "Joe W" <arizonajeep@h...> wrote:
> > > > > Mike,
> > > > >
> > > > > What kind of SYE did you purchase? Cut and tap output shaft
> > kind
> > > > or take
> > > > > apart the transfer case and install kind?
> > > > >
> > > > > Joe West
> > > > >
> > > > > > -----Original Message-----
> > > > > > From: jeepin_in_az [mailto:jeepin_in_az@y...]
> > > > > > Sent: Wednesday, December 26, 2001 8:27 AM
> > > > > > To: az_vjc@y...
> > > > > > Subject: [az_vjc] SYE Install
> > > > > >
> > > > > >
> > > > > > Any last minute advice on installing a SYE on a TJ? James T
> > and I
> > > > > > will be installing our sye's on Friday. James, did you find
> > > > anyone
> > > > > > to take pics yet? Anyone want to come over and document and
> > photo
> > > > > > the install? We will be starting at 8:00 am at my brothers
> > yard,
> > > > off
> > > > > > Currie between Rural and McClintock.
> > > > > >
> > > > > > Mike Baney
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > > Your use of Yahoo! Groups is subject to
> > > > > > http://docs.yahoo.com/info/terms/
> > > > > >
> > > > > >
> > > >
> > > >
> > > >
> > > >
> > > > Your use of Yahoo! Groups is subject to
> > > http://docs.yahoo.com/info/terms/
> >
> >
> >
> >
> > Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
>
>
>
>
>
> Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
>
>
38032 From: jetowle2000 <James.Towle@a...>
Date: Wed Dec 26, 2001 11:59am
Subject: Re: Any runs 12/30 or 12/31?
I have some company in town and hopefully will have a new SYE in.
This being said, Sunday I have promised a trip to my company.
Hint, hint, Mike....
Keep it open.
--James
--- In az_vjc@y..., "paparoach85251" <lespaparoach@m...> wrote:
> Any runs planned for this coming Sunday or Monday? Have both days
> free and would really like to get out and flex the new control arms.
> Nothing too extreme, maybe fr42 or something in florence junction
> area.
> Let me know,
>
> Les R
38033 From: jetowle2000 <James.Towle@a...>
Date: Wed Dec 26, 2001 0:01pm
Subject: Re: SYE Install
Dan C. said, it took almost as much time getting the transfer case in
and out as it did putting the SYE in. He was working by himself
though.
--James
--- In az_vjc@y..., "DesertJeep" <joey@d...> wrote:
> There you have it. Joe having said that means that leaving it in is
the
> way to go!
>
> Just kidding. I could not resist. LOL.
>
> If it were mine to do I would yank it out and bench fit the SYE. The
> first time. I'd want to do this to learn more of how it works and
upside
> down with bad angles would be tough. But on my second install I
probably
> leave it in if possible.
> Just my opinion.
> Joey K
>
> > -----Original Message-----
> > From: Joe W [mailto:arizonajeep@h...]
> > Sent: Wednesday, December 26, 2001 12:26 PM
> > To: az_vjc@y...
> > Subject: RE: [az_vjc] Re: SYE Install
> >
> >
> > Mike,
> >
> > I would recommend that you pull the transfer case before
> > modifying it. I think you'll find the job much easier to do
> > that way... and the time to take the transfer case out and
> > put it back in is less than 30 minutes. I'd recommend that
> > you do yourself a favor and just take it completely out
> > before cracking it open.
> >
> > Joe West
> >
> > > -----Original Message-----
> > > From: jeepin_in_az [mailto:jeepin_in_az@y...]
> > > Sent: Wednesday, December 26, 2001 10:35 AM
> > > To: az_vjc@y...
> > > Subject: [az_vjc] Re: SYE Install
> > >
> > >
> > > Thanks Joe!
> > >
> > > Mike
> > >
> > > --- In az_vjc@y..., "Joe W" <arizonajeep@h...> wrote:
> > > > Mike,
> > > >
> > > > I doubt you'll have any problems...but if you run into any on
> > > Friday, give
> > > > me a call (602) 524-7632. I have the day off and would
> > be happy to
> > > help.
> > > >
> > > > Joe West
> > > >
> > > > > -----Original Message-----
> > > > > From: jeepin_in_az [mailto:jeepin_in_az@y...]
> > > > > Sent: Wednesday, December 26, 2001 9:57 AM
> > > > > To: az_vjc@y...
> > > > > Subject: [az_vjc] Re: SYE Install
> > > > >
> > > > >
> > > > > We both go the nice kit, take apart the tcase kind. I was
> > > thinking
> > > > > of stealing your tcase from Chris....and giving him mine, I
only
> > > have
> > > > > around 20,000 miles.
> > > > >
> > > > > Mike
> > > > >
> > > > >
> > > > >
> > > > >
> > > > > --- In az_vjc@y..., "Joe W" <arizonajeep@h...> wrote:
> > > > > > Mike,
> > > > > >
> > > > > > What kind of SYE did you purchase? Cut and tap output
shaft
> > > kind
> > > > > or take
> > > > > > apart the transfer case and install kind?
> > > > > >
> > > > > > Joe West
> > > > > >
> > > > > > > -----Original Message-----
> > > > > > > From: jeepin_in_az [mailto:jeepin_in_az@y...]
> > > > > > > Sent: Wednesday, December 26, 2001 8:27 AM
> > > > > > > To: az_vjc@y...
> > > > > > > Subject: [az_vjc] SYE Install
> > > > > > >
> > > > > > >
> > > > > > > Any last minute advice on installing a SYE on a TJ?
James T
> > > and I
> > > > > > > will be installing our sye's on Friday. James, did you
find
> > > > > anyone
> > > > > > > to take pics yet? Anyone want to come over and
document and
> > > photo
> > > > > > > the install? We will be starting at 8:00 am at my
brothers
> > > yard,
> > > > > off
> > > > > > > Currie between Rural and McClintock.
> > > > > > >
> > > > > > > Mike Baney
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > > Your use of Yahoo! Groups is subject to
> > > > > > > http://docs.yahoo.com/info/terms/
> > > > > > >
> > > > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > > Your use of Yahoo! Groups is subject to
> > > > http://docs.yahoo.com/info/terms/
> > >
> > >
> > >
> > >
> > > Your use of Yahoo! Groups is subject to
> > http://docs.yahoo.com/info/terms/
> >
> >
> >
> >
> >
> > Your use of Yahoo! Groups is subject to
> > http://docs.yahoo.com/info/terms/
> >
> >
38034 From: jeepin_in_az <jeepin_in_az@y...>
Date: Wed Dec 26, 2001 0:12pm
Subject: Re: SYE Install
Well, like Joey said, do the opposite of JW ;) I have heard the sye
is easier leaving it in. Yours will be done first James, so we can
decide what to do on mine ;)
Mike Baney
--- In az_vjc@y..., "jetowle2000" <James.Towle@a...> wrote:
>
> Dan C. said, it took almost as much time getting the transfer case
in
> and out as it did putting the SYE in. He was working by himself
> though.
>
> --James
>
> --- In az_vjc@y..., "DesertJeep" <joey@d...> wrote:
> > There you have it. Joe having said that means that leaving it in
is
> the
> > way to go!
> >
> > Just kidding. I could not resist. LOL.
> >
> > If it were mine to do I would yank it out and bench fit the SYE.
The
> > first time. I'd want to do this to learn more of how it works and
> upside
> > down with bad angles would be tough. But on my second install I
> probably
> > leave it in if possible.
> > Just my opinion.
> > Joey K
> >
> > > -----Original Message-----
> > > From: Joe W [mailto:arizonajeep@h...]
> > > Sent: Wednesday, December 26, 2001 12:26 PM
> > > To: az_vjc@y...
> > > Subject: RE: [az_vjc] Re: SYE Install
> > >
> > >
> > > Mike,
> > >
> > > I would recommend that you pull the transfer case before
> > > modifying it. I think you'll find the job much easier to do
> > > that way... and the time to take the transfer case out and
> > > put it back in is less than 30 minutes. I'd recommend that
> > > you do yourself a favor and just take it completely out
> > > before cracking it open.
> > >
> > > Joe West
> > >
> > > > -----Original Message-----
> > > > From: jeepin_in_az [mailto:jeepin_in_az@y...]
> > > > Sent: Wednesday, December 26, 2001 10:35 AM
> > > > To: az_vjc@y...
> > > > Subject: [az_vjc] Re: SYE Install
> > > >
> > > >
> > > > Thanks Joe!
> > > >
> > > > Mike
> > > >
> > > > --- In az_vjc@y..., "Joe W" <arizonajeep@h...> wrote:
> > > > > Mike,
> > > > >
> > > > > I doubt you'll have any problems...but if you run into any
on
> > > > Friday, give
> > > > > me a call (602) 524-7632. I have the day off and would
> > > be happy to
> > > > help.
> > > > >
> > > > > Joe West
> > > > >
> > > > > > -----Original Message-----
> > > > > > From: jeepin_in_az [mailto:jeepin_in_az@y...]
> > > > > > Sent: Wednesday, December 26, 2001 9:57 AM
> > > > > > To: az_vjc@y...
> > > > > > Subject: [az_vjc] Re: SYE Install
> > > > > >
> > > > > >
> > > > > > We both go the nice kit, take apart the tcase kind. I was
> > > > thinking
> > > > > > of stealing your tcase from Chris....and giving him mine,
I
> only
> > > > have
> > > > > > around 20,000 miles.
> > > > > >
> > > > > > Mike
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > > --- In az_vjc@y..., "Joe W" <arizonajeep@h...> wrote:
> > > > > > > Mike,
> > > > > > >
> > > > > > > What kind of SYE did you purchase? Cut and tap output
> shaft
> > > > kind
> > > > > > or take
> > > > > > > apart the transfer case and install kind?
> > > > > > >
> > > > > > > Joe West
> > > > > > >
> > > > > > > > -----Original Message-----
> > > > > > > > From: jeepin_in_az [mailto:jeepin_in_az@y...]
> > > > > > > > Sent: Wednesday, December 26, 2001 8:27 AM
> > > > > > > > To: az_vjc@y...
> > > > > > > > Subject: [az_vjc] SYE Install
> > > > > > > >
> > > > > > > >
> > > > > > > > Any last minute advice on installing a SYE on a TJ?
> James T
> > > > and I
> > > > > > > > will be installing our sye's on Friday. James, did
you
> find
> > > > > > anyone
> > > > > > > > to take pics yet? Anyone want to come over and
> document and
> > > > photo
> > > > > > > > the install? We will be starting at 8:00 am at my
> brothers
> > > > yard,
> > > > > > off
> > > > > > > > Currie between Rural and McClintock.
> > > > > > > >
> > > > > > > > Mike Baney
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > > Your use of Yahoo! Groups is subject to
> > > > > > > > http://docs.yahoo.com/info/terms/
> > > > > > > >
> > > > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > > Your use of Yahoo! Groups is subject to
> > > > > http://docs.yahoo.com/info/terms/
> > > >
> > > >
> > > >
> > > >
> > > > Your use of Yahoo! Groups is subject to
> > > http://docs.yahoo.com/info/terms/
> > >
> > >
> > >
> > >
> > >
> > > Your use of Yahoo! Groups is subject to
> > > http://docs.yahoo.com/info/terms/
> > >
> > >
38035 From: paparoach85251 <lespaparoach@m...>
Date: Wed Dec 26, 2001 0:19pm
Subject: Re: SYE Install
Mike-
Where did you guys get your new driveshafts to go with your SYE's?
Did you order a custom from Tom Woods or is there some place local
that is more affordable and of similar quality?
I will be adding an SYE to my TJ in the next couple months (as soon
as I complete my axle swap) and would like to know for future
reference.
Thanks,
Les
--- In az_vjc@y..., "jeepin_in_az" <jeepin_in_az@y...> wrote:
> Well, like Joey said, do the opposite of JW ;) I have heard the
sye
> is easier leaving it in. Yours will be done first James, so we can
> decide what to do on mine ;)
>
> Mike Baney
>
>
>
> --- In az_vjc@y..., "jetowle2000" <James.Towle@a...> wrote:
> >
> > Dan C. said, it took almost as much time getting the transfer
case
> in
> > and out as it did putting the SYE in. He was working by himself
> > though.
> >
> > --James
> >
> > --- In az_vjc@y..., "DesertJeep" <joey@d...> wrote:
> > > There you have it. Joe having said that means that leaving it
in
> is
> > the
> > > way to go!
> > >
> > > Just kidding. I could not resist. LOL.
> > >
> > > If it were mine to do I would yank it out and bench fit the
SYE.
> The
> > > first time. I'd want to do this to learn more of how it works
and
> > upside
> > > down with bad angles would be tough. But on my second install I
> > probably
> > > leave it in if possible.
> > > Just my opinion.
> > > Joey K
> > >
> > > > -----Original Message-----
> > > > From: Joe W [mailto:arizonajeep@h...]
> > > > Sent: Wednesday, December 26, 2001 12:26 PM
> > > > To: az_vjc@y...
> > > > Subject: RE: [az_vjc] Re: SYE Install
> > > >
> > > >
> > > > Mike,
> > > >
> > > > I would recommend that you pull the transfer case before
> > > > modifying it. I think you'll find the job much easier to do
> > > > that way... and the time to take the transfer case out and
> > > > put it back in is less than 30 minutes. I'd recommend that
> > > > you do yourself a favor and just take it completely out
> > > > before cracking it open.
> > > >
> > > > Joe West
> > > >
> > > > > -----Original Message-----
> > > > > From: jeepin_in_az [mailto:jeepin_in_az@y...]
> > > > > Sent: Wednesday, December 26, 2001 10:35 AM
> > > > > To: az_vjc@y...
> > > > > Subject: [az_vjc] Re: SYE Install
> > > > >
> > > > >
> > > > > Thanks Joe!
> > > > >
> > > > > Mike
> > > > >
> > > > > --- In az_vjc@y..., "Joe W" <arizonajeep@h...> wrote:
> > > > > > Mike,
> > > > > >
> > > > > > I doubt you'll have any problems...but if you run into
any
> on
> > > > > Friday, give
> > > > > > me a call (602) 524-7632. I have the day off and would
> > > > be happy to
> > > > > help.
> > > > > >
> > > > > > Joe West
> > > > > >
> > > > > > > -----Original Message-----
> > > > > > > From: jeepin_in_az [mailto:jeepin_in_az@y...]
> > > > > > > Sent: Wednesday, December 26, 2001 9:57 AM
> > > > > > > To: az_vjc@y...
> > > > > > > Subject: [az_vjc] Re: SYE Install
> > > > > > >
> > > > > > >
> > > > > > > We both go the nice kit, take apart the tcase kind. I
was
> > > > > thinking
> > > > > > > of stealing your tcase from Chris....and giving him
mine,
> I
> > only
> > > > > have
> > > > > > > around 20,000 miles.
> > > > > > >
> > > > > > > Mike
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > > --- In az_vjc@y..., "Joe W" <arizonajeep@h...> wrote:
> > > > > > > > Mike,
> > > > > > > >
> > > > > > > > What kind of SYE did you purchase? Cut and tap
output
> > shaft
> > > > > kind
> > > > > > > or take
> > > > > > > > apart the transfer case and install kind?
> > > > > > > >
> > > > > > > > Joe West
> > > > > > > >
> > > > > > > > > -----Original Message-----
> > > > > > > > > From: jeepin_in_az [mailto:jeepin_in_az@y...]
> > > > > > > > > Sent: Wednesday, December 26, 2001 8:27 AM
> > > > > > > > > To: az_vjc@y...
> > > > > > > > > Subject: [az_vjc] SYE Install
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > Any last minute advice on installing a SYE on a
TJ?
> > James T
> > > > > and I
> > > > > > > > > will be installing our sye's on Friday. James, did
> you
> > find
> > > > > > > anyone
> > > > > > > > > to take pics yet? Anyone want to come over and
> > document and
> > > > > photo
> > > > > > > > > the install? We will be starting at 8:00 am at my
> > brothers
> > > > > yard,
> > > > > > > off
> > > > > > > > > Currie between Rural and McClintock.
> > > > > > > > >
> > > > > > > > > Mike Baney
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > Your use of Yahoo! Groups is subject to
> > > > > > > > > http://docs.yahoo.com/info/terms/
> > > > > > > > >
> > > > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > > Your use of Yahoo! Groups is subject to
> > > > > > http://docs.yahoo.com/info/terms/
> > > > >
> > > > >
> > > > >
> > > > >
> > > > > Your use of Yahoo! Groups is subject to
> > > > http://docs.yahoo.com/info/terms/
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > Your use of Yahoo! Groups is subject to
> > > > http://docs.yahoo.com/info/terms/
> > > >
> > > >
38036 From: Baja Fleg <fleigle@h...>
Date: Wed Dec 26, 2001 0:23pm
Subject: Re: one bad *** tj motor
Not to brag :) David but I'm getting 210hp out of a warmed over 4 cylinder
VW motor!!
Michael
----Original Message Follows----
how about 275 HP and 350 lb/ft of torque
http://www.4x4review.com/feature/ultimate-tj2.asp
David R. W. Withers
Desk: 480.551.4667
Mobile: 480.215.6992
__________________________________________________ _______________
Send and receive Hotmail on your mobile device: http://mobile.msn.com
38037 From: Michael Wixom <certifiedinsp@m...>
Date: Wed Dec 26, 2001 0:43pm
Subject: Re: Does anyone have Garmin's Topo! ?
I have the topo program, I like it but I am sure there are 20 other
"experts" on here that will tell you it sucks and you need something else.
however I would be glad to let you play with it, even make a copy if you
like. I am in Gilbert and will be out of town this weekend if you want to
borrow it during that time. Give me a call on my cell phone 602-284-0738
Mike Wixom
85 CJ-7
----- Original Message -----
From: "johnrabenius2001" <johnrabenius@h...>
To: <az_vjc@yahoogroups.com>
Sent: Wednesday, December 26, 2001 8:23 AM
Subject: [az_vjc] Does anyone have Garmin's Topo! ?
> I bought a Garmin ETREX Legend, and I want to try out Garmin's TOPO!
> software before I but it.
>
> Does anyone have it?
>
> What do you think of it?
>
> Has anyone in the club added the routes for the different trails?
>
> TOPO! costs $100.00. That's fine, but if there is a better one that I
> can download the topo maps to my Legend from, I'd be interested in
> what everyone else has found. I heard that TOPO! is the only one that
> downloads the topo maps to my Legend. Most of the software out there
> allows me to upload/download ROUTES and waypoints, but no topo map
> information. I thought I saw a separate software program that allows
> me to indirectly load the topos, like National Geographic's Arizona
> Topo at REI. Has anyone seen this?
>
> John Rabenius
>
>
>
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
>
38038 From: jeepin_in_az <jeepin_in_az@y...>
Date: Wed Dec 26, 2001 0:24pm
Subject: Re: SYE Install
We are going to install the kits, then drive down to Dick's
Driveshaft in 4 hi and have them custom make one on site for us.
They are around $180-$200.
Mike
--- In az_vjc@y..., "paparoach85251" <lespaparoach@m...> wrote:
> Mike-
> Where did you guys get your new driveshafts to go with your SYE's?
> Did you order a custom from Tom Woods or is there some place local
> that is more affordable and of similar quality?
> I will be adding an SYE to my TJ in the next couple months (as soon
> as I complete my axle swap) and would like to know for future
> reference.
>
> Thanks,
> Les
>
>
> --- In az_vjc@y..., "jeepin_in_az" <jeepin_in_az@y...> wrote:
> > Well, like Joey said, do the opposite of JW ;) I have heard the
> sye
> > is easier leaving it in. Yours will be done first James, so we
can
> > decide what to do on mine ;)
> >
> > Mike Baney
> >
> >
> >
> > --- In az_vjc@y..., "jetowle2000" <James.Towle@a...> wrote:
> > >
> > > Dan C. said, it took almost as much time getting the transfer
> case
> > in
> > > and out as it did putting the SYE in. He was working by himself
> > > though.
> > >
> > > --James
> > >
> > > --- In az_vjc@y..., "DesertJeep" <joey@d...> wrote:
> > > > There you have it. Joe having said that means that leaving it
> in
> > is
> > > the
> > > > way to go!
> > > >
> > > > Just kidding. I could not resist. LOL.
> > > >
> > > > If it were mine to do I would yank it out and bench fit the
> SYE.
> > The
> > > > first time. I'd want to do this to learn more of how it works
> and
> > > upside
> > > > down with bad angles would be tough. But on my second install
I
> > > probably
> > > > leave it in if possible.
> > > > Just my opinion.
> > > > Joey K
> > > >
> > > > > -----Original Message-----
> > > > > From: Joe W [mailto:arizonajeep@h...]
> > > > > Sent: Wednesday, December 26, 2001 12:26 PM
> > > > > To: az_vjc@y...
> > > > > Subject: RE: [az_vjc] Re: SYE Install
> > > > >
> > > > >
> > > > > Mike,
> > > > >
> > > > > I would recommend that you pull the transfer case before
> > > > > modifying it. I think you'll find the job much easier to
do
> > > > > that way... and the time to take the transfer case out and
> > > > > put it back in is less than 30 minutes. I'd recommend that
> > > > > you do yourself a favor and just take it completely out
> > > > > before cracking it open.
> > > > >
> > > > > Joe West
> > > > >
> > > > > > -----Original Message-----
> > > > > > From: jeepin_in_az [mailto:jeepin_in_az@y...]
> > > > > > Sent: Wednesday, December 26, 2001 10:35 AM
> > > > > > To: az_vjc@y...
> > > > > > Subject: [az_vjc] Re: SYE Install
> > > > > >
> > > > > >
> > > > > > Thanks Joe!
> > > > > >
> > > > > > Mike
> > > > > >
> > > > > > --- In az_vjc@y..., "Joe W" <arizonajeep@h...> wrote:
> > > > > > > Mike,
> > > > > > >
> > > > > > > I doubt you'll have any problems...but if you run into
> any
> > on
> > > > > > Friday, give
> > > > > > > me a call (602) 524-7632. I have the day off and would
> > > > > be happy to
> > > > > > help.
> > > > > > >
> > > > > > > Joe West
> > > > > > >
> > > > > > > > -----Original Message-----
> > > > > > > > From: jeepin_in_az [mailto:jeepin_in_az@y...]
> > > > > > > > Sent: Wednesday, December 26, 2001 9:57 AM
> > > > > > > > To: az_vjc@y...
> > > > > > > > Subject: [az_vjc] Re: SYE Install
> > > > > > > >
> > > > > > > >
> > > > > > > > We both go the nice kit, take apart the tcase kind.
I
> was
> > > > > > thinking
> > > > > > > > of stealing your tcase from Chris....and giving him
> mine,
> > I
> > > only
> > > > > > have
> > > > > > > > around 20,000 miles.
> > > > > > > >
> > > > > > > > Mike
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > > --- In az_vjc@y..., "Joe W" <arizonajeep@h...> wrote:
> > > > > > > > > Mike,
> > > > > > > > >
> > > > > > > > > What kind of SYE did you purchase? Cut and tap
> output
> > > shaft
> > > > > > kind
> > > > > > > > or take
> > > > > > > > > apart the transfer case and install kind?
> > > > > > > > >
> > > > > > > > > Joe West
> > > > > > > > >
> > > > > > > > > > -----Original Message-----
> > > > > > > > > > From: jeepin_in_az [mailto:jeepin_in_az@y...]
> > > > > > > > > > Sent: Wednesday, December 26, 2001 8:27 AM
> > > > > > > > > > To: az_vjc@y...
> > > > > > > > > > Subject: [az_vjc] SYE Install
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > > Any last minute advice on installing a SYE on a
> TJ?
> > > James T
> > > > > > and I
> > > > > > > > > > will be installing our sye's on Friday. James,
did
> > you
> > > find
> > > > > > > > anyone
> > > > > > > > > > to take pics yet? Anyone want to come over and
> > > document and
> > > > > > photo
> > > > > > > > > > the install? We will be starting at 8:00 am at
my
> > > brothers
> > > > > > yard,
> > > > > > > > off
> > > > > > > > > > Currie between Rural and McClintock.
> > > > > > > > > >
> > > > > > > > > > Mike Baney
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > > Your use of Yahoo! Groups is subject to
> > > > > > > > > > http://docs.yahoo.com/info/terms/
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > > Your use of Yahoo! Groups is subject to
> > > > > > > http://docs.yahoo.com/info/terms/
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > > Your use of Yahoo! Groups is subject to
> > > > > http://docs.yahoo.com/info/terms/
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > > Your use of Yahoo! Groups is subject to
> > > > > http://docs.yahoo.com/info/terms/
> > > > >
> > > > >
38039 From: David R. W. Withers <dr_ww@h...>
Date: Wed Dec 26, 2001 0:55pm
Subject: RE: one bad *** tj motor
HP means nothing in rock crawling, How much Torque
-----Original Message-----
From: Baja Fleg [mailto:fleigle@h...]
Sent: Wednesday, December 26, 2001 1:23 PM
To: az_vjc@yahoogroups.com
Subject: Re: [az_vjc] one bad *** tj motor
Not to brag :) David but I'm getting 210hp out of a warmed over 4
cylinder VW motor!!
Michael
----Original Message Follows----
how about 275 HP and 350 lb/ft of torque
http://www.4x4review.com/feature/ultimate-tj2.asp
David R. W. Withers
Desk: 480.551.4667
Mobile: 480.215.6992
__________________________________________________ _______________
Send and receive Hotmail on your mobile device: http://mobile.msn.com
Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
38040 From: Baja Fleg <fleigle@h...>
Date: Wed Dec 26, 2001 1:09pm
Subject: Re: Does anyone have Garmin's Topo! ?
National Geographic not Garmin makes TOPO!! Garmin has its own software
called Mapsource and it is the only software that will allow direct basemap
uploads. Most of the other software setups will allow waypoint and route
uploads only. I have been told that mapsource is not that good. I have
used TOPO! made by National Geographic and its good, basically its just the
USGS maps scanned in. You can get almost the same results from OziExplorer
but downloading the USGS maps for it can be a bit difficult and time
consuming. Another decent software out there is Topo USA 3.0 by Delorme. I
have used Topo USA 2.0 and found that a lot of the trails are either not on
it or are not correct. I just ordered Topo USA 3.0 on DVD, I've been told
that it has an option to add your own roads so that will be nice and that a
lot of the data has been upgraded. What I do when off-roading is connect
the my GPS to my laptop and let my passengers direct me by watching the
screen live update as we go. Works great especially while Geocaching.
Michael
----Original Message Follows----
I bought a Garmin ETREX Legend, and I want to try out Garmin's TOPO!
software before I but it.
Does anyone have it?
What do you think of it?
Has anyone in the club added the routes for the different trails?
TOPO! costs $100.00. That's fine, but if there is a better one that I
can download the topo maps to my Legend from, I'd be interested in
what everyone else has found. I heard that TOPO! is the only one that
downloads the topo maps to my Legend. Most of the software out there
allows me to upload/download ROUTES and waypoints, but no topo map
information. I thought I saw a separate software program that allows
me to indirectly load the topos, like National Geographic's Arizona
Topo at REI. Has anyone seen this?
John Rabenius
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
Michael Fleigle
Http://members.xoom.com/Fleg
__________________________________________________ _______________
Join the world’s largest e-mail service with MSN Hotmail.
http://www.hotmail.com
38041 From: fergustein <fergustein@y...>
Date: Wed Dec 26, 2001 1:15pm
Subject: LIFT HELP NEEDED
I need you guys to come thru for me on this one…….PLEASE.
I want to hit the coves to help with the pull this weekend but here's
my issue.
I'm installing a lift on the xj. A daystar 1¾ lift spaceer and a
new leaf in the rear. I got the front spacers in and all done with
no real issues, first wheel took alittle longer than the second but
it is my first lift experience. I thought it was pretty simple for
being my first time.
The 2 problem I've encountered is with the rear are following: After
disassembling the u-bolts and the nut that holds the pack together I
can't get them to separate enough to get the new, nicely arched leaf
into the pack. I was using jackstands and the whole bit, I simply
couldn't do it. It looked like w/o (imo) removing the leaf pack and
repacking it, it could not be done. This in itself isn't a big deal
(I don't think) except I couldn't break the hanger bolts as they are
quite big. Any insight on this???
The above was problem 1. Problem 2, is it also looks like I need to
extend the rear brake line. When I had the leaf ubolts off and axle
dropped, it appeared that given the degree of the new arch and the
tension already on the brake line at the dropped point that the line
is not going to be to short when all is done. Of course, this is
from an untrained eye and am relying on opinions/help from you all.
Does this sound right?
PLEASE….as I already have the front done and I really want to get to
the coves and help this weekend can someone(s) help me finish up
installing my Christmas gift. I'll supply the pizza and beverage of
choice.
Thanks,
Fergus
Email or call me….602 281 1731
38042 From: jeepin_in_az <jeepin_in_az@y...>
Date: Wed Dec 26, 2001 1:16pm
Subject: Re: one bad *** tj motor
I thought HP was Hewlett Packard ;) Nevermind, just the geek side of
me showing....
Mike Baney
--- In az_vjc@y..., "David R. W. Withers" <dr_ww@h...> wrote:
> HP means nothing in rock crawling, How much Torque
>
> -----Original Message-----
> From: Baja Fleg [mailto:fleigle@h...]
> Sent: Wednesday, December 26, 2001 1:23 PM
> To: az_vjc@y...
> Subject: Re: [az_vjc] one bad *** tj motor
>
>
> Not to brag :) David but I'm getting 210hp out of a warmed over 4
> cylinder VW motor!!
>
> Michael
>
>
> ----Original Message Follows----
> how about 275 HP and 350 lb/ft of torque
> http://www.4x4review.com/feature/ultimate-tj2.asp
>
> David R. W. Withers
> Desk: 480.551.4667
> Mobile: 480.215.6992
>
>
>
>
> __________________________________________________ _______________
> Send and receive Hotmail on your mobile device:
http://mobile.msn.com
>
>
>
>
> Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
38043 From: TRobertsRN <TRobertsRN@e...>
Date: Wed Dec 26, 2001 1:24pm
Subject: Re: So what did everyone get for christmas
The best thing I got was before Christmas on my birthday the 20th. I got a
1961 Cherokee, a 1983 Cherokee, and a 1981 Cherokee. How is this possible
you ask? I married my Cherokee/Scottish girlfriend in St. Thomas on a week
long cruise and now have tow step daughters 18 and 20 years old. My 78
Cherokee Wide Trac is number 4 in my life now. And no the other Cherokee's
are not Wide Trac's.
Tom
> OK all,
>
> Meryy christmas......my family is still asleep and I want o know what
> goodies jSanta brought you all for Christmas
>
>
> Brian Harmon
> 88 XJ Laredo
> http://www.cherokee-nation.com
>
>
> __________________________________________________ _______________
> Get your FREE download of MSN Explorer at
http://explorer.msn.com/intl.asp.
>
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
38044 From: <hillb@s...>
Date: Wed Dec 26, 2001 1:21pm
Subject: RE: one bad *** tj motor
It's torque you want, huh? Take a look at this monster!
http://www.off-road.com/4x4web/features/1999/03/
"David R. W.
Withers" To: <az_vjc@yahoogroups.com>
<dr_ww@hotmai cc:
l.com> Subject: RE: [az_vjc] one bad *** tj motor
12/26/2001
01:55 PM
Please
respond to
az_vjc
HP means nothing in rock crawling, How much Torque
-----Original Message-----
From: Baja Fleg [mailto:fleigle@h...]
Sent: Wednesday, December 26, 2001 1:23 PM
To: az_vjc@yahoogroups.com
Subject: Re: [az_vjc] one bad *** tj motor
Not to brag :) David but I'm getting 210hp out of a warmed over 4
cylinder VW motor!!
Michael
----Original Message Follows----
how about 275 HP and 350 lb/ft of torque
http://www.4x4review.com/feature/ultimate-tj2.asp
David R. W. Withers
Desk: 480.551.4667
Mobile: 480.215.6992
__________________________________________________ _______________
Send and receive Hotmail on your mobile device: http://mobile.msn.com
Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
38045 From: AzVJC Website <azvjc@a...>
Date: Wed Dec 26, 2001 1:31pm
Subject: [FS] CD-ROM Drive
Price: $20
Contact: heelshock@hotmail.com
LG CD-ROM Drive, Model: CRD-8483B, Replaced with CD-RW, Maybe somebody needs one.
Bradlee Clark
38046 From: David R. W. Withers <dr_ww@h...>
Date: Wed Dec 26, 2001 1:32pm
Subject: RE: one bad *** tj motor
Nice 90K ride, if I was to spend that much I'd of got a Cummins turbo
diesel.
-----Original Message-----
From: hillb@s... [mailto:hillb@s...]
Sent: Wednesday, December 26, 2001 2:21 PM
To: az_vjc@yahoogroups.com
Cc: az_vjc@yahoogroups.com
Subject: RE: [az_vjc] one bad *** tj motor
It's torque you want, huh? Take a look at this monster!
http://www.off-road.com/4x4web/features/1999/03/
"David R. W.
Withers" To:
<az_vjc@yahoogroups.com>
<dr_ww@hotmai cc:
l.com> Subject: RE: [az_vjc] one
bad *** tj motor
12/26/2001
01:55 PM
Please
respond to
az_vjc
HP means nothing in rock crawling, How much Torque
-----Original Message-----
From: Baja Fleg [mailto:fleigle@h...]
Sent: Wednesday, December 26, 2001 1:23 PM
To: az_vjc@yahoogroups.com
Subject: Re: [az_vjc] one bad *** tj motor
Not to brag :) David but I'm getting 210hp out of a warmed over 4
cylinder VW motor!!
Michael
----Original Message Follows----
how about 275 HP and 350 lb/ft of torque
http://www.4x4review.com/feature/ultimate-tj2.asp
David R. W. Withers
Desk: 480.551.4667
Mobile: 480.215.6992
__________________________________________________ _______________
Send and receive Hotmail on your mobile device: http://mobile.msn.com
Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
38047 From: jeepin_in_az <jeepin_in_az@y...>
Date: Wed Dec 26, 2001 1:36pm
Subject: FrUsTrAtiOn!!!
DAMN IT!!! Every 4x4 place I have called is closed untill after the
1st! It really pisses me off, I want RE upper adjust control arms,
Tera bushings for the lowers. I called ToyBox last week, left a
message, and no return call. Also called BigOffroad, same thing. I
did get a hold of Gorferitoffroad and ordered my 1" MM lift. $45
plus $9.50 shipping! Pretty good deal! Also got a hold of ORU to
see if they had any bushings, nope, have to order from Teraflex, and
they are closed till the 2nd.....
Oh well, guess they don't want my money.....;)
Mike Baney
38048 From: Joe W <arizonajeep@h...>
Date: Wed Dec 26, 2001 1:40pm
Subject: RE: Re: SYE Install
That's only because Dan had to use a sawzall and the jaws-of-life just to
get all the twisted sheetmetal out of the way so he could GET to his
transfer case. <grin>
Joe West
> -----Original Message-----
> From: jetowle2000 [mailto:James.Towle@a...]
> Sent: Wednesday, December 26, 2001 1:01 PM
> To: az_vjc@yahoogroups.com
> Subject: [az_vjc] Re: SYE Install
>
>
>
> Dan C. said, it took almost as much time getting the transfer case in
> and out as it did putting the SYE in. He was working by himself
> though.
>
> --James
>
> --- In az_vjc@y..., "DesertJeep" <joey@d...> wrote:
> > There you have it. Joe having said that means that leaving it in is
> the
> > way to go!
> >
> > Just kidding. I could not resist. LOL.
> >
> > If it were mine to do I would yank it out and bench fit the SYE. The
> > first time. I'd want to do this to learn more of how it works and
> upside
> > down with bad angles would be tough. But on my second install I
> probably
> > leave it in if possible.
> > Just my opinion.
> > Joey K
> >
> > > -----Original Message-----
> > > From: Joe W [mailto:arizonajeep@h...]
> > > Sent: Wednesday, December 26, 2001 12:26 PM
> > > To: az_vjc@y...
> > > Subject: RE: [az_vjc] Re: SYE Install
> > >
> > >
> > > Mike,
> > >
> > > I would recommend that you pull the transfer case before
> > > modifying it. I think you'll find the job much easier to do
> > > that way... and the time to take the transfer case out and
> > > put it back in is less than 30 minutes. I'd recommend that
> > > you do yourself a favor and just take it completely out
> > > before cracking it open.
> > >
> > > Joe West
> > >
> > > > -----Original Message-----
> > > > From: jeepin_in_az [mailto:jeepin_in_az@y...]
> > > > Sent: Wednesday, December 26, 2001 10:35 AM
> > > > To: az_vjc@y...
> > > > Subject: [az_vjc] Re: SYE Install
> > > >
> > > >
> > > > Thanks Joe!
> > > >
> > > > Mike
> > > >
> > > > --- In az_vjc@y..., "Joe W" <arizonajeep@h...> wrote:
> > > > > Mike,
> > > > >
> > > > > I doubt you'll have any problems...but if you run into any on
> > > > Friday, give
> > > > > me a call (602) 524-7632. I have the day off and would
> > > be happy to
> > > > help.
> > > > >
> > > > > Joe West
> > > > >
> > > > > > -----Original Message-----
> > > > > > From: jeepin_in_az [mailto:jeepin_in_az@y...]
> > > > > > Sent: Wednesday, December 26, 2001 9:57 AM
> > > > > > To: az_vjc@y...
> > > > > > Subject: [az_vjc] Re: SYE Install
> > > > > >
> > > > > >
> > > > > > We both go the nice kit, take apart the tcase kind. I was
> > > > thinking
> > > > > > of stealing your tcase from Chris....and giving him mine, I
> only
> > > > have
> > > > > > around 20,000 miles.
> > > > > >
> > > > > > Mike
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > > --- In az_vjc@y..., "Joe W" <arizonajeep@h...> wrote:
> > > > > > > Mike,
> > > > > > >
> > > > > > > What kind of SYE did you purchase? Cut and tap output
> shaft
> > > > kind
> > > > > > or take
> > > > > > > apart the transfer case and install kind?
> > > > > > >
> > > > > > > Joe West
> > > > > > >
> > > > > > > > -----Original Message-----
> > > > > > > > From: jeepin_in_az [mailto:jeepin_in_az@y...]
> > > > > > > > Sent: Wednesday, December 26, 2001 8:27 AM
> > > > > > > > To: az_vjc@y...
> > > > > > > > Subject: [az_vjc] SYE Install
> > > > > > > >
> > > > > > > >
> > > > > > > > Any last minute advice on installing a SYE on a TJ?
> James T
> > > > and I
> > > > > > > > will be installing our sye's on Friday. James, did you
> find
> > > > > > anyone
> > > > > > > > to take pics yet? Anyone want to come over and
> document and
> > > > photo
> > > > > > > > the install? We will be starting at 8:00 am at my
> brothers
> > > > yard,
> > > > > > off
> > > > > > > > Currie between Rural and McClintock.
> > > > > > > >
> > > > > > > > Mike Baney
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > > Your use of Yahoo! Groups is subject to
> > > > > > > > http://docs.yahoo.com/info/terms/
> > > > > > > >
> > > > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > > Your use of Yahoo! Groups is subject to
> > > > > http://docs.yahoo.com/info/terms/
> > > >
> > > >
> > > >
> > > >
> > > > Your use of Yahoo! Groups is subject to
> > > http://docs.yahoo.com/info/terms/
> > >
> > >
> > >
> > >
> > >
> > > Your use of Yahoo! Groups is subject to
> > > http://docs.yahoo.com/info/terms/
> > >
> > >
>
>
>
>
> Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
38049 From: Baja Fleg <fleigle@h...>
Date: Wed Dec 26, 2001 1:43pm
Subject: RE: one bad *** VW motor
Can't say I do much rockcrawling, not even in the TJ. Can't stand it myself
I'm more into sand and desert running. I'll see if I can find the dyno
sheet again if you really want the torque numbers as I don't remember them
right off the bat. How much you think that ultimate TJ is going to run
anyway? I bet it clears 50K easy when done.
Michael
----Original Message Follows----
Nice 90K ride, if I was to spend that much I'd of got a Cummins turbo
diesel.
-----Original Message-----
From: hillb@s... [mailto:hillb@s...]
Sent: Wednesday, December 26, 2001 2:21 PM
To: az_vjc@yahoogroups.com
Cc: az_vjc@yahoogroups.com
Subject: RE: [az_vjc] one bad *** tj motor
It's torque you want, huh? Take a look at this monster!
http://www.off-road.com/4x4web/features/1999/03/
"David R. W.
Withers" To:
<az_vjc@yahoogroups.com>
<dr_ww@hotmai cc:
l.com> Subject: RE: [az_vjc] one
bad *** tj motor
12/26/2001
01:55 PM
Please
respond to
az_vjc
HP means nothing in rock crawling, How much Torque
-----Original Message-----
From: Baja Fleg [mailto:fleigle@h...]
Sent: Wednesday, December 26, 2001 1:23 PM
To: az_vjc@yahoogroups.com
Subject: Re: [az_vjc] one bad *** tj motor
Not to brag :) David but I'm getting 210hp out of a warmed over 4
cylinder VW motor!!
Michael
----Original Message Follows----
how about 275 HP and 350 lb/ft of torque
http://www.4x4review.com/feature/ultimate-tj2.asp
David R. W. Withers
Desk: 480.551.4667
Mobile: 480.215.6992
__________________________________________________ _______________
Send and receive Hotmail on your mobile device: http://mobile.msn.com
Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
Michael Fleigle
Http://members.xoom.com/Fleg
__________________________________________________ _______________
Send and receive Hotmail on your mobile device: http://mobile.msn.com
38050 From: David R. W. Withers <dr_ww@h...>
Date: Wed Dec 26, 2001 1:46pm
Subject: RE: FrUsTrAtiOn!!!
Give Jay @ toybox till the end of the day. But I don't think they carry
anything in stock.
-----Original Message-----
From: jeepin_in_az [mailto:jeepin_in_az@y...]
Sent: Wednesday, December 26, 2001 2:37 PM
To: az_vjc@yahoogroups.com
Subject: [az_vjc] FrUsTrAtiOn!!!
DAMN IT!!! Every 4x4 place I have called is closed untill after the
1st! It really pisses me off, I want RE upper adjust control arms, Tera
bushings for the lowers. I called ToyBox last week, left a message, and
no return call. Also called BigOffroad, same thing. I did get a hold
of Gorferitoffroad and ordered my 1" MM lift. $45 plus $9.50 shipping!
Pretty good deal! Also got a hold of ORU to see if they had any
bushings, nope, have to order from Teraflex, and they are closed till
the 2nd.....
Oh well, guess they don't want my money.....;)
Mike Baney
Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
38051 From: David R. W. Withers <dr_ww@h...>
Date: Wed Dec 26, 2001 1:46pm
Subject: Anyone see or here about the jeep that rolled last weekend on the 60?
David R. W. Withers
Desk: 480.551.4667
Mobile: 480.215.6992
38052 From: David R. W. Withers <dr_ww@h...>
Date: Wed Dec 26, 2001 1:50pm
Subject: RE: one bad *** VW motor
True
Where do you find sand?,,, anywhere near phoenix?
-----Original Message-----
From: Baja Fleg [mailto:fleigle@h...]
Sent: Wednesday, December 26, 2001 2:43 PM
To: az_vjc@yahoogroups.com
Subject: RE: [az_vjc] one bad *** VW motor
Can't say I do much rockcrawling, not even in the TJ. Can't stand it
myself I'm more into sand and desert running. I'll see if I can find
the dyno sheet again if you really want the torque numbers as I don't
remember them right off the bat. How much you think that ultimate TJ is
going to run anyway? I bet it clears 50K easy when done.
Michael
----Original Message Follows----
Nice 90K ride, if I was to spend that much I'd of got a Cummins turbo
diesel.
-----Original Message-----
From: hillb@s... [mailto:hillb@s...]
Sent: Wednesday, December 26, 2001 2:21 PM
To: az_vjc@yahoogroups.com
Cc: az_vjc@yahoogroups.com
Subject: RE: [az_vjc] one bad *** tj motor
It's torque you want, huh? Take a look at this monster!
http://www.off-road.com/4x4web/features/1999/03/
"David R. W.
Withers" To:
<az_vjc@yahoogroups.com>
<dr_ww@hotmai cc:
l.com> Subject: RE: [az_vjc] one
bad *** tj motor
12/26/2001
01:55 PM
Please
respond to
az_vjc
HP means nothing in rock crawling, How much Torque
-----Original Message-----
From: Baja Fleg [mailto:fleigle@h...]
Sent: Wednesday, December 26, 2001 1:23 PM
To: az_vjc@yahoogroups.com
Subject: Re: [az_vjc] one bad *** tj motor
Not to brag :) David but I'm getting 210hp out of a warmed over 4
cylinder VW motor!!
Michael
----Original Message Follows----
how about 275 HP and 350 lb/ft of torque
http://www.4x4review.com/feature/ultimate-tj2.asp
David R. W. Withers
Desk: 480.551.4667
Mobile: 480.215.6992
__________________________________________________ _______________
Send and receive Hotmail on your mobile device: http://mobile.msn.com
Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
Michael Fleigle
Http://members.xoom.com/Fleg
__________________________________________________ _______________
Send and receive Hotmail on your mobile device: http://mobile.msn.com
Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
38028 From: David R. W. Withers <dr_ww@h...>
Date: Wed Dec 26, 2001 11:33am
Subject: UPDATED Expo ok this is who we have so far
I'm still trying to contact the guy. But I'll insure that the Tickets are at the Gate. I'll keep you guys/gals informed.
John R. 1
Rob Brooks 3
Rob Williams 3
Mike Beach 2
Chris Benner 2
Gary Holmes 2
Scott Thomas 2/3
Crusher 8
Mike Baney 2
Lisa & Barry Bunch 2
Mike and Karen Acuna 5
Les 1
Me 2
TOTAL = 35/36
I'll probably pay for them if I can't work out a deal with the promoter. I'll ask to leave them at the gate. I will also forward the website when I find it again.
David R. W. Withers
Desk: 480.551.4667
Mobile: 480.215.6992
--------------------------------------------------------------------------------
ADVERTISEMENT
38029 From: Joe W <arizonajeep@h...>
Date: Wed Dec 26, 2001 11:33am
Subject: RE: Steelhorse pack rack
Chris,
Before you install the rack, I'd recommend you put a nice fresh coat of paint on it. The paint will help delay the rack's inevitable transformation into ferrous oxide.
Joe West
-----Original Message-----
From: Chris benner [mailto:cbenner@thejeepfiles.com]
Sent: Wednesday, December 26, 2001 11:25 AM
To: hunteroffroad@aol.com; az_vjc@yahoogroups.com
Subject: Re: [az_vjc] Steelhorse pack rack
yeah its the tailgate mounting style, and yeah I can see what you mean, it feels a little flimsy to hold 200lbs.
what ends up breaking? the actual hinge part? do they make heavier duty hinges?
----- Original Message -----
From: hunteroffroad@aol.com
To: az_vjc@yahoogroups.com
Sent: Wednesday, December 26, 2001 12:49 PM
Subject: Re: [az_vjc] Steelhorse pack rack
Is that the rack that mounts to the tail gate or to the hitch? If it mounts to the tail gate, you will want to use some caution, I have no doubts that the rack will hold the listed weight, but I kow the tail gates themsleves can not, for very long. I have fixed ennough to know serious failure can happen. All though, I have noitced that the TJ tail gate is much stronger than the YJ gate.
Take care,
John K
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
38030 From: <hunteroffroad@a...>
Date: Wed Dec 26, 2001 6:41am
Subject: Re: Steelhorse pack rack
I think they do make heavyduty hinges. But for the life of me, I cant remember were I saw them or who had them. They may help. It depends on the mounting style. Different racks mount a little diffrerent. I have seen the hinges fail, and in some cases, it starts to pull the sheet metal away from the tub and I have even had 2 where the brackets pulled thru the sheetmetal of the tail gate. All though, keep in mind, theses have only been YJ and CJs. The worst damage I have seen to the tail gate of TJ has just been some play and looseing of the hinges.
I think the racks are OK, I would just maybe load the sleeping bags back there instead of the cooler.. : ).
Best Regards
John K
38031 From: DesertJeep <joey@d...>
Date: Wed Dec 26, 2001 11:55am
Subject: RE: Re: SYE Install
There you have it. Joe having said that means that leaving it in is the
way to go!
Just kidding. I could not resist. LOL.
If it were mine to do I would yank it out and bench fit the SYE. The
first time. I'd want to do this to learn more of how it works and upside
down with bad angles would be tough. But on my second install I probably
leave it in if possible.
Just my opinion.
Joey K
> -----Original Message-----
> From: Joe W [mailto:arizonajeep@h...]
> Sent: Wednesday, December 26, 2001 12:26 PM
> To: az_vjc@yahoogroups.com
> Subject: RE: [az_vjc] Re: SYE Install
>
>
> Mike,
>
> I would recommend that you pull the transfer case before
> modifying it. I think you'll find the job much easier to do
> that way... and the time to take the transfer case out and
> put it back in is less than 30 minutes. I'd recommend that
> you do yourself a favor and just take it completely out
> before cracking it open.
>
> Joe West
>
> > -----Original Message-----
> > From: jeepin_in_az [mailto:jeepin_in_az@y...]
> > Sent: Wednesday, December 26, 2001 10:35 AM
> > To: az_vjc@yahoogroups.com
> > Subject: [az_vjc] Re: SYE Install
> >
> >
> > Thanks Joe!
> >
> > Mike
> >
> > --- In az_vjc@y..., "Joe W" <arizonajeep@h...> wrote:
> > > Mike,
> > >
> > > I doubt you'll have any problems...but if you run into any on
> > Friday, give
> > > me a call (602) 524-7632. I have the day off and would
> be happy to
> > help.
> > >
> > > Joe West
> > >
> > > > -----Original Message-----
> > > > From: jeepin_in_az [mailto:jeepin_in_az@y...]
> > > > Sent: Wednesday, December 26, 2001 9:57 AM
> > > > To: az_vjc@y...
> > > > Subject: [az_vjc] Re: SYE Install
> > > >
> > > >
> > > > We both go the nice kit, take apart the tcase kind. I was
> > thinking
> > > > of stealing your tcase from Chris....and giving him mine, I only
> > have
> > > > around 20,000 miles.
> > > >
> > > > Mike
> > > >
> > > >
> > > >
> > > >
> > > > --- In az_vjc@y..., "Joe W" <arizonajeep@h...> wrote:
> > > > > Mike,
> > > > >
> > > > > What kind of SYE did you purchase? Cut and tap output shaft
> > kind
> > > > or take
> > > > > apart the transfer case and install kind?
> > > > >
> > > > > Joe West
> > > > >
> > > > > > -----Original Message-----
> > > > > > From: jeepin_in_az [mailto:jeepin_in_az@y...]
> > > > > > Sent: Wednesday, December 26, 2001 8:27 AM
> > > > > > To: az_vjc@y...
> > > > > > Subject: [az_vjc] SYE Install
> > > > > >
> > > > > >
> > > > > > Any last minute advice on installing a SYE on a TJ? James T
> > and I
> > > > > > will be installing our sye's on Friday. James, did you find
> > > > anyone
> > > > > > to take pics yet? Anyone want to come over and document and
> > photo
> > > > > > the install? We will be starting at 8:00 am at my brothers
> > yard,
> > > > off
> > > > > > Currie between Rural and McClintock.
> > > > > >
> > > > > > Mike Baney
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > > Your use of Yahoo! Groups is subject to
> > > > > > http://docs.yahoo.com/info/terms/
> > > > > >
> > > > > >
> > > >
> > > >
> > > >
> > > >
> > > > Your use of Yahoo! Groups is subject to
> > > http://docs.yahoo.com/info/terms/
> >
> >
> >
> >
> > Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
>
>
>
>
>
> Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
>
>
38032 From: jetowle2000 <James.Towle@a...>
Date: Wed Dec 26, 2001 11:59am
Subject: Re: Any runs 12/30 or 12/31?
I have some company in town and hopefully will have a new SYE in.
This being said, Sunday I have promised a trip to my company.
Hint, hint, Mike....
Keep it open.
--James
--- In az_vjc@y..., "paparoach85251" <lespaparoach@m...> wrote:
> Any runs planned for this coming Sunday or Monday? Have both days
> free and would really like to get out and flex the new control arms.
> Nothing too extreme, maybe fr42 or something in florence junction
> area.
> Let me know,
>
> Les R
38033 From: jetowle2000 <James.Towle@a...>
Date: Wed Dec 26, 2001 0:01pm
Subject: Re: SYE Install
Dan C. said, it took almost as much time getting the transfer case in
and out as it did putting the SYE in. He was working by himself
though.
--James
--- In az_vjc@y..., "DesertJeep" <joey@d...> wrote:
> There you have it. Joe having said that means that leaving it in is
the
> way to go!
>
> Just kidding. I could not resist. LOL.
>
> If it were mine to do I would yank it out and bench fit the SYE. The
> first time. I'd want to do this to learn more of how it works and
upside
> down with bad angles would be tough. But on my second install I
probably
> leave it in if possible.
> Just my opinion.
> Joey K
>
> > -----Original Message-----
> > From: Joe W [mailto:arizonajeep@h...]
> > Sent: Wednesday, December 26, 2001 12:26 PM
> > To: az_vjc@y...
> > Subject: RE: [az_vjc] Re: SYE Install
> >
> >
> > Mike,
> >
> > I would recommend that you pull the transfer case before
> > modifying it. I think you'll find the job much easier to do
> > that way... and the time to take the transfer case out and
> > put it back in is less than 30 minutes. I'd recommend that
> > you do yourself a favor and just take it completely out
> > before cracking it open.
> >
> > Joe West
> >
> > > -----Original Message-----
> > > From: jeepin_in_az [mailto:jeepin_in_az@y...]
> > > Sent: Wednesday, December 26, 2001 10:35 AM
> > > To: az_vjc@y...
> > > Subject: [az_vjc] Re: SYE Install
> > >
> > >
> > > Thanks Joe!
> > >
> > > Mike
> > >
> > > --- In az_vjc@y..., "Joe W" <arizonajeep@h...> wrote:
> > > > Mike,
> > > >
> > > > I doubt you'll have any problems...but if you run into any on
> > > Friday, give
> > > > me a call (602) 524-7632. I have the day off and would
> > be happy to
> > > help.
> > > >
> > > > Joe West
> > > >
> > > > > -----Original Message-----
> > > > > From: jeepin_in_az [mailto:jeepin_in_az@y...]
> > > > > Sent: Wednesday, December 26, 2001 9:57 AM
> > > > > To: az_vjc@y...
> > > > > Subject: [az_vjc] Re: SYE Install
> > > > >
> > > > >
> > > > > We both go the nice kit, take apart the tcase kind. I was
> > > thinking
> > > > > of stealing your tcase from Chris....and giving him mine, I
only
> > > have
> > > > > around 20,000 miles.
> > > > >
> > > > > Mike
> > > > >
> > > > >
> > > > >
> > > > >
> > > > > --- In az_vjc@y..., "Joe W" <arizonajeep@h...> wrote:
> > > > > > Mike,
> > > > > >
> > > > > > What kind of SYE did you purchase? Cut and tap output
shaft
> > > kind
> > > > > or take
> > > > > > apart the transfer case and install kind?
> > > > > >
> > > > > > Joe West
> > > > > >
> > > > > > > -----Original Message-----
> > > > > > > From: jeepin_in_az [mailto:jeepin_in_az@y...]
> > > > > > > Sent: Wednesday, December 26, 2001 8:27 AM
> > > > > > > To: az_vjc@y...
> > > > > > > Subject: [az_vjc] SYE Install
> > > > > > >
> > > > > > >
> > > > > > > Any last minute advice on installing a SYE on a TJ?
James T
> > > and I
> > > > > > > will be installing our sye's on Friday. James, did you
find
> > > > > anyone
> > > > > > > to take pics yet? Anyone want to come over and
document and
> > > photo
> > > > > > > the install? We will be starting at 8:00 am at my
brothers
> > > yard,
> > > > > off
> > > > > > > Currie between Rural and McClintock.
> > > > > > >
> > > > > > > Mike Baney
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > > Your use of Yahoo! Groups is subject to
> > > > > > > http://docs.yahoo.com/info/terms/
> > > > > > >
> > > > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > > Your use of Yahoo! Groups is subject to
> > > > http://docs.yahoo.com/info/terms/
> > >
> > >
> > >
> > >
> > > Your use of Yahoo! Groups is subject to
> > http://docs.yahoo.com/info/terms/
> >
> >
> >
> >
> >
> > Your use of Yahoo! Groups is subject to
> > http://docs.yahoo.com/info/terms/
> >
> >
38034 From: jeepin_in_az <jeepin_in_az@y...>
Date: Wed Dec 26, 2001 0:12pm
Subject: Re: SYE Install
Well, like Joey said, do the opposite of JW ;) I have heard the sye
is easier leaving it in. Yours will be done first James, so we can
decide what to do on mine ;)
Mike Baney
--- In az_vjc@y..., "jetowle2000" <James.Towle@a...> wrote:
>
> Dan C. said, it took almost as much time getting the transfer case
in
> and out as it did putting the SYE in. He was working by himself
> though.
>
> --James
>
> --- In az_vjc@y..., "DesertJeep" <joey@d...> wrote:
> > There you have it. Joe having said that means that leaving it in
is
> the
> > way to go!
> >
> > Just kidding. I could not resist. LOL.
> >
> > If it were mine to do I would yank it out and bench fit the SYE.
The
> > first time. I'd want to do this to learn more of how it works and
> upside
> > down with bad angles would be tough. But on my second install I
> probably
> > leave it in if possible.
> > Just my opinion.
> > Joey K
> >
> > > -----Original Message-----
> > > From: Joe W [mailto:arizonajeep@h...]
> > > Sent: Wednesday, December 26, 2001 12:26 PM
> > > To: az_vjc@y...
> > > Subject: RE: [az_vjc] Re: SYE Install
> > >
> > >
> > > Mike,
> > >
> > > I would recommend that you pull the transfer case before
> > > modifying it. I think you'll find the job much easier to do
> > > that way... and the time to take the transfer case out and
> > > put it back in is less than 30 minutes. I'd recommend that
> > > you do yourself a favor and just take it completely out
> > > before cracking it open.
> > >
> > > Joe West
> > >
> > > > -----Original Message-----
> > > > From: jeepin_in_az [mailto:jeepin_in_az@y...]
> > > > Sent: Wednesday, December 26, 2001 10:35 AM
> > > > To: az_vjc@y...
> > > > Subject: [az_vjc] Re: SYE Install
> > > >
> > > >
> > > > Thanks Joe!
> > > >
> > > > Mike
> > > >
> > > > --- In az_vjc@y..., "Joe W" <arizonajeep@h...> wrote:
> > > > > Mike,
> > > > >
> > > > > I doubt you'll have any problems...but if you run into any
on
> > > > Friday, give
> > > > > me a call (602) 524-7632. I have the day off and would
> > > be happy to
> > > > help.
> > > > >
> > > > > Joe West
> > > > >
> > > > > > -----Original Message-----
> > > > > > From: jeepin_in_az [mailto:jeepin_in_az@y...]
> > > > > > Sent: Wednesday, December 26, 2001 9:57 AM
> > > > > > To: az_vjc@y...
> > > > > > Subject: [az_vjc] Re: SYE Install
> > > > > >
> > > > > >
> > > > > > We both go the nice kit, take apart the tcase kind. I was
> > > > thinking
> > > > > > of stealing your tcase from Chris....and giving him mine,
I
> only
> > > > have
> > > > > > around 20,000 miles.
> > > > > >
> > > > > > Mike
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > > --- In az_vjc@y..., "Joe W" <arizonajeep@h...> wrote:
> > > > > > > Mike,
> > > > > > >
> > > > > > > What kind of SYE did you purchase? Cut and tap output
> shaft
> > > > kind
> > > > > > or take
> > > > > > > apart the transfer case and install kind?
> > > > > > >
> > > > > > > Joe West
> > > > > > >
> > > > > > > > -----Original Message-----
> > > > > > > > From: jeepin_in_az [mailto:jeepin_in_az@y...]
> > > > > > > > Sent: Wednesday, December 26, 2001 8:27 AM
> > > > > > > > To: az_vjc@y...
> > > > > > > > Subject: [az_vjc] SYE Install
> > > > > > > >
> > > > > > > >
> > > > > > > > Any last minute advice on installing a SYE on a TJ?
> James T
> > > > and I
> > > > > > > > will be installing our sye's on Friday. James, did
you
> find
> > > > > > anyone
> > > > > > > > to take pics yet? Anyone want to come over and
> document and
> > > > photo
> > > > > > > > the install? We will be starting at 8:00 am at my
> brothers
> > > > yard,
> > > > > > off
> > > > > > > > Currie between Rural and McClintock.
> > > > > > > >
> > > > > > > > Mike Baney
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > > Your use of Yahoo! Groups is subject to
> > > > > > > > http://docs.yahoo.com/info/terms/
> > > > > > > >
> > > > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > > Your use of Yahoo! Groups is subject to
> > > > > http://docs.yahoo.com/info/terms/
> > > >
> > > >
> > > >
> > > >
> > > > Your use of Yahoo! Groups is subject to
> > > http://docs.yahoo.com/info/terms/
> > >
> > >
> > >
> > >
> > >
> > > Your use of Yahoo! Groups is subject to
> > > http://docs.yahoo.com/info/terms/
> > >
> > >
38035 From: paparoach85251 <lespaparoach@m...>
Date: Wed Dec 26, 2001 0:19pm
Subject: Re: SYE Install
Mike-
Where did you guys get your new driveshafts to go with your SYE's?
Did you order a custom from Tom Woods or is there some place local
that is more affordable and of similar quality?
I will be adding an SYE to my TJ in the next couple months (as soon
as I complete my axle swap) and would like to know for future
reference.
Thanks,
Les
--- In az_vjc@y..., "jeepin_in_az" <jeepin_in_az@y...> wrote:
> Well, like Joey said, do the opposite of JW ;) I have heard the
sye
> is easier leaving it in. Yours will be done first James, so we can
> decide what to do on mine ;)
>
> Mike Baney
>
>
>
> --- In az_vjc@y..., "jetowle2000" <James.Towle@a...> wrote:
> >
> > Dan C. said, it took almost as much time getting the transfer
case
> in
> > and out as it did putting the SYE in. He was working by himself
> > though.
> >
> > --James
> >
> > --- In az_vjc@y..., "DesertJeep" <joey@d...> wrote:
> > > There you have it. Joe having said that means that leaving it
in
> is
> > the
> > > way to go!
> > >
> > > Just kidding. I could not resist. LOL.
> > >
> > > If it were mine to do I would yank it out and bench fit the
SYE.
> The
> > > first time. I'd want to do this to learn more of how it works
and
> > upside
> > > down with bad angles would be tough. But on my second install I
> > probably
> > > leave it in if possible.
> > > Just my opinion.
> > > Joey K
> > >
> > > > -----Original Message-----
> > > > From: Joe W [mailto:arizonajeep@h...]
> > > > Sent: Wednesday, December 26, 2001 12:26 PM
> > > > To: az_vjc@y...
> > > > Subject: RE: [az_vjc] Re: SYE Install
> > > >
> > > >
> > > > Mike,
> > > >
> > > > I would recommend that you pull the transfer case before
> > > > modifying it. I think you'll find the job much easier to do
> > > > that way... and the time to take the transfer case out and
> > > > put it back in is less than 30 minutes. I'd recommend that
> > > > you do yourself a favor and just take it completely out
> > > > before cracking it open.
> > > >
> > > > Joe West
> > > >
> > > > > -----Original Message-----
> > > > > From: jeepin_in_az [mailto:jeepin_in_az@y...]
> > > > > Sent: Wednesday, December 26, 2001 10:35 AM
> > > > > To: az_vjc@y...
> > > > > Subject: [az_vjc] Re: SYE Install
> > > > >
> > > > >
> > > > > Thanks Joe!
> > > > >
> > > > > Mike
> > > > >
> > > > > --- In az_vjc@y..., "Joe W" <arizonajeep@h...> wrote:
> > > > > > Mike,
> > > > > >
> > > > > > I doubt you'll have any problems...but if you run into
any
> on
> > > > > Friday, give
> > > > > > me a call (602) 524-7632. I have the day off and would
> > > > be happy to
> > > > > help.
> > > > > >
> > > > > > Joe West
> > > > > >
> > > > > > > -----Original Message-----
> > > > > > > From: jeepin_in_az [mailto:jeepin_in_az@y...]
> > > > > > > Sent: Wednesday, December 26, 2001 9:57 AM
> > > > > > > To: az_vjc@y...
> > > > > > > Subject: [az_vjc] Re: SYE Install
> > > > > > >
> > > > > > >
> > > > > > > We both go the nice kit, take apart the tcase kind. I
was
> > > > > thinking
> > > > > > > of stealing your tcase from Chris....and giving him
mine,
> I
> > only
> > > > > have
> > > > > > > around 20,000 miles.
> > > > > > >
> > > > > > > Mike
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > > --- In az_vjc@y..., "Joe W" <arizonajeep@h...> wrote:
> > > > > > > > Mike,
> > > > > > > >
> > > > > > > > What kind of SYE did you purchase? Cut and tap
output
> > shaft
> > > > > kind
> > > > > > > or take
> > > > > > > > apart the transfer case and install kind?
> > > > > > > >
> > > > > > > > Joe West
> > > > > > > >
> > > > > > > > > -----Original Message-----
> > > > > > > > > From: jeepin_in_az [mailto:jeepin_in_az@y...]
> > > > > > > > > Sent: Wednesday, December 26, 2001 8:27 AM
> > > > > > > > > To: az_vjc@y...
> > > > > > > > > Subject: [az_vjc] SYE Install
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > Any last minute advice on installing a SYE on a
TJ?
> > James T
> > > > > and I
> > > > > > > > > will be installing our sye's on Friday. James, did
> you
> > find
> > > > > > > anyone
> > > > > > > > > to take pics yet? Anyone want to come over and
> > document and
> > > > > photo
> > > > > > > > > the install? We will be starting at 8:00 am at my
> > brothers
> > > > > yard,
> > > > > > > off
> > > > > > > > > Currie between Rural and McClintock.
> > > > > > > > >
> > > > > > > > > Mike Baney
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > Your use of Yahoo! Groups is subject to
> > > > > > > > > http://docs.yahoo.com/info/terms/
> > > > > > > > >
> > > > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > > Your use of Yahoo! Groups is subject to
> > > > > > http://docs.yahoo.com/info/terms/
> > > > >
> > > > >
> > > > >
> > > > >
> > > > > Your use of Yahoo! Groups is subject to
> > > > http://docs.yahoo.com/info/terms/
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > Your use of Yahoo! Groups is subject to
> > > > http://docs.yahoo.com/info/terms/
> > > >
> > > >
38036 From: Baja Fleg <fleigle@h...>
Date: Wed Dec 26, 2001 0:23pm
Subject: Re: one bad *** tj motor
Not to brag :) David but I'm getting 210hp out of a warmed over 4 cylinder
VW motor!!
Michael
----Original Message Follows----
how about 275 HP and 350 lb/ft of torque
http://www.4x4review.com/feature/ultimate-tj2.asp
David R. W. Withers
Desk: 480.551.4667
Mobile: 480.215.6992
__________________________________________________ _______________
Send and receive Hotmail on your mobile device: http://mobile.msn.com
38037 From: Michael Wixom <certifiedinsp@m...>
Date: Wed Dec 26, 2001 0:43pm
Subject: Re: Does anyone have Garmin's Topo! ?
I have the topo program, I like it but I am sure there are 20 other
"experts" on here that will tell you it sucks and you need something else.
however I would be glad to let you play with it, even make a copy if you
like. I am in Gilbert and will be out of town this weekend if you want to
borrow it during that time. Give me a call on my cell phone 602-284-0738
Mike Wixom
85 CJ-7
----- Original Message -----
From: "johnrabenius2001" <johnrabenius@h...>
To: <az_vjc@yahoogroups.com>
Sent: Wednesday, December 26, 2001 8:23 AM
Subject: [az_vjc] Does anyone have Garmin's Topo! ?
> I bought a Garmin ETREX Legend, and I want to try out Garmin's TOPO!
> software before I but it.
>
> Does anyone have it?
>
> What do you think of it?
>
> Has anyone in the club added the routes for the different trails?
>
> TOPO! costs $100.00. That's fine, but if there is a better one that I
> can download the topo maps to my Legend from, I'd be interested in
> what everyone else has found. I heard that TOPO! is the only one that
> downloads the topo maps to my Legend. Most of the software out there
> allows me to upload/download ROUTES and waypoints, but no topo map
> information. I thought I saw a separate software program that allows
> me to indirectly load the topos, like National Geographic's Arizona
> Topo at REI. Has anyone seen this?
>
> John Rabenius
>
>
>
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
>
38038 From: jeepin_in_az <jeepin_in_az@y...>
Date: Wed Dec 26, 2001 0:24pm
Subject: Re: SYE Install
We are going to install the kits, then drive down to Dick's
Driveshaft in 4 hi and have them custom make one on site for us.
They are around $180-$200.
Mike
--- In az_vjc@y..., "paparoach85251" <lespaparoach@m...> wrote:
> Mike-
> Where did you guys get your new driveshafts to go with your SYE's?
> Did you order a custom from Tom Woods or is there some place local
> that is more affordable and of similar quality?
> I will be adding an SYE to my TJ in the next couple months (as soon
> as I complete my axle swap) and would like to know for future
> reference.
>
> Thanks,
> Les
>
>
> --- In az_vjc@y..., "jeepin_in_az" <jeepin_in_az@y...> wrote:
> > Well, like Joey said, do the opposite of JW ;) I have heard the
> sye
> > is easier leaving it in. Yours will be done first James, so we
can
> > decide what to do on mine ;)
> >
> > Mike Baney
> >
> >
> >
> > --- In az_vjc@y..., "jetowle2000" <James.Towle@a...> wrote:
> > >
> > > Dan C. said, it took almost as much time getting the transfer
> case
> > in
> > > and out as it did putting the SYE in. He was working by himself
> > > though.
> > >
> > > --James
> > >
> > > --- In az_vjc@y..., "DesertJeep" <joey@d...> wrote:
> > > > There you have it. Joe having said that means that leaving it
> in
> > is
> > > the
> > > > way to go!
> > > >
> > > > Just kidding. I could not resist. LOL.
> > > >
> > > > If it were mine to do I would yank it out and bench fit the
> SYE.
> > The
> > > > first time. I'd want to do this to learn more of how it works
> and
> > > upside
> > > > down with bad angles would be tough. But on my second install
I
> > > probably
> > > > leave it in if possible.
> > > > Just my opinion.
> > > > Joey K
> > > >
> > > > > -----Original Message-----
> > > > > From: Joe W [mailto:arizonajeep@h...]
> > > > > Sent: Wednesday, December 26, 2001 12:26 PM
> > > > > To: az_vjc@y...
> > > > > Subject: RE: [az_vjc] Re: SYE Install
> > > > >
> > > > >
> > > > > Mike,
> > > > >
> > > > > I would recommend that you pull the transfer case before
> > > > > modifying it. I think you'll find the job much easier to
do
> > > > > that way... and the time to take the transfer case out and
> > > > > put it back in is less than 30 minutes. I'd recommend that
> > > > > you do yourself a favor and just take it completely out
> > > > > before cracking it open.
> > > > >
> > > > > Joe West
> > > > >
> > > > > > -----Original Message-----
> > > > > > From: jeepin_in_az [mailto:jeepin_in_az@y...]
> > > > > > Sent: Wednesday, December 26, 2001 10:35 AM
> > > > > > To: az_vjc@y...
> > > > > > Subject: [az_vjc] Re: SYE Install
> > > > > >
> > > > > >
> > > > > > Thanks Joe!
> > > > > >
> > > > > > Mike
> > > > > >
> > > > > > --- In az_vjc@y..., "Joe W" <arizonajeep@h...> wrote:
> > > > > > > Mike,
> > > > > > >
> > > > > > > I doubt you'll have any problems...but if you run into
> any
> > on
> > > > > > Friday, give
> > > > > > > me a call (602) 524-7632. I have the day off and would
> > > > > be happy to
> > > > > > help.
> > > > > > >
> > > > > > > Joe West
> > > > > > >
> > > > > > > > -----Original Message-----
> > > > > > > > From: jeepin_in_az [mailto:jeepin_in_az@y...]
> > > > > > > > Sent: Wednesday, December 26, 2001 9:57 AM
> > > > > > > > To: az_vjc@y...
> > > > > > > > Subject: [az_vjc] Re: SYE Install
> > > > > > > >
> > > > > > > >
> > > > > > > > We both go the nice kit, take apart the tcase kind.
I
> was
> > > > > > thinking
> > > > > > > > of stealing your tcase from Chris....and giving him
> mine,
> > I
> > > only
> > > > > > have
> > > > > > > > around 20,000 miles.
> > > > > > > >
> > > > > > > > Mike
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > > --- In az_vjc@y..., "Joe W" <arizonajeep@h...> wrote:
> > > > > > > > > Mike,
> > > > > > > > >
> > > > > > > > > What kind of SYE did you purchase? Cut and tap
> output
> > > shaft
> > > > > > kind
> > > > > > > > or take
> > > > > > > > > apart the transfer case and install kind?
> > > > > > > > >
> > > > > > > > > Joe West
> > > > > > > > >
> > > > > > > > > > -----Original Message-----
> > > > > > > > > > From: jeepin_in_az [mailto:jeepin_in_az@y...]
> > > > > > > > > > Sent: Wednesday, December 26, 2001 8:27 AM
> > > > > > > > > > To: az_vjc@y...
> > > > > > > > > > Subject: [az_vjc] SYE Install
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > > Any last minute advice on installing a SYE on a
> TJ?
> > > James T
> > > > > > and I
> > > > > > > > > > will be installing our sye's on Friday. James,
did
> > you
> > > find
> > > > > > > > anyone
> > > > > > > > > > to take pics yet? Anyone want to come over and
> > > document and
> > > > > > photo
> > > > > > > > > > the install? We will be starting at 8:00 am at
my
> > > brothers
> > > > > > yard,
> > > > > > > > off
> > > > > > > > > > Currie between Rural and McClintock.
> > > > > > > > > >
> > > > > > > > > > Mike Baney
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > > Your use of Yahoo! Groups is subject to
> > > > > > > > > > http://docs.yahoo.com/info/terms/
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > > Your use of Yahoo! Groups is subject to
> > > > > > > http://docs.yahoo.com/info/terms/
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > > Your use of Yahoo! Groups is subject to
> > > > > http://docs.yahoo.com/info/terms/
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > > Your use of Yahoo! Groups is subject to
> > > > > http://docs.yahoo.com/info/terms/
> > > > >
> > > > >
38039 From: David R. W. Withers <dr_ww@h...>
Date: Wed Dec 26, 2001 0:55pm
Subject: RE: one bad *** tj motor
HP means nothing in rock crawling, How much Torque
-----Original Message-----
From: Baja Fleg [mailto:fleigle@h...]
Sent: Wednesday, December 26, 2001 1:23 PM
To: az_vjc@yahoogroups.com
Subject: Re: [az_vjc] one bad *** tj motor
Not to brag :) David but I'm getting 210hp out of a warmed over 4
cylinder VW motor!!
Michael
----Original Message Follows----
how about 275 HP and 350 lb/ft of torque
http://www.4x4review.com/feature/ultimate-tj2.asp
David R. W. Withers
Desk: 480.551.4667
Mobile: 480.215.6992
__________________________________________________ _______________
Send and receive Hotmail on your mobile device: http://mobile.msn.com
Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
38040 From: Baja Fleg <fleigle@h...>
Date: Wed Dec 26, 2001 1:09pm
Subject: Re: Does anyone have Garmin's Topo! ?
National Geographic not Garmin makes TOPO!! Garmin has its own software
called Mapsource and it is the only software that will allow direct basemap
uploads. Most of the other software setups will allow waypoint and route
uploads only. I have been told that mapsource is not that good. I have
used TOPO! made by National Geographic and its good, basically its just the
USGS maps scanned in. You can get almost the same results from OziExplorer
but downloading the USGS maps for it can be a bit difficult and time
consuming. Another decent software out there is Topo USA 3.0 by Delorme. I
have used Topo USA 2.0 and found that a lot of the trails are either not on
it or are not correct. I just ordered Topo USA 3.0 on DVD, I've been told
that it has an option to add your own roads so that will be nice and that a
lot of the data has been upgraded. What I do when off-roading is connect
the my GPS to my laptop and let my passengers direct me by watching the
screen live update as we go. Works great especially while Geocaching.
Michael
----Original Message Follows----
I bought a Garmin ETREX Legend, and I want to try out Garmin's TOPO!
software before I but it.
Does anyone have it?
What do you think of it?
Has anyone in the club added the routes for the different trails?
TOPO! costs $100.00. That's fine, but if there is a better one that I
can download the topo maps to my Legend from, I'd be interested in
what everyone else has found. I heard that TOPO! is the only one that
downloads the topo maps to my Legend. Most of the software out there
allows me to upload/download ROUTES and waypoints, but no topo map
information. I thought I saw a separate software program that allows
me to indirectly load the topos, like National Geographic's Arizona
Topo at REI. Has anyone seen this?
John Rabenius
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
Michael Fleigle
Http://members.xoom.com/Fleg
__________________________________________________ _______________
Join the world’s largest e-mail service with MSN Hotmail.
http://www.hotmail.com
38041 From: fergustein <fergustein@y...>
Date: Wed Dec 26, 2001 1:15pm
Subject: LIFT HELP NEEDED
I need you guys to come thru for me on this one…….PLEASE.
I want to hit the coves to help with the pull this weekend but here's
my issue.
I'm installing a lift on the xj. A daystar 1¾ lift spaceer and a
new leaf in the rear. I got the front spacers in and all done with
no real issues, first wheel took alittle longer than the second but
it is my first lift experience. I thought it was pretty simple for
being my first time.
The 2 problem I've encountered is with the rear are following: After
disassembling the u-bolts and the nut that holds the pack together I
can't get them to separate enough to get the new, nicely arched leaf
into the pack. I was using jackstands and the whole bit, I simply
couldn't do it. It looked like w/o (imo) removing the leaf pack and
repacking it, it could not be done. This in itself isn't a big deal
(I don't think) except I couldn't break the hanger bolts as they are
quite big. Any insight on this???
The above was problem 1. Problem 2, is it also looks like I need to
extend the rear brake line. When I had the leaf ubolts off and axle
dropped, it appeared that given the degree of the new arch and the
tension already on the brake line at the dropped point that the line
is not going to be to short when all is done. Of course, this is
from an untrained eye and am relying on opinions/help from you all.
Does this sound right?
PLEASE….as I already have the front done and I really want to get to
the coves and help this weekend can someone(s) help me finish up
installing my Christmas gift. I'll supply the pizza and beverage of
choice.
Thanks,
Fergus
Email or call me….602 281 1731
38042 From: jeepin_in_az <jeepin_in_az@y...>
Date: Wed Dec 26, 2001 1:16pm
Subject: Re: one bad *** tj motor
I thought HP was Hewlett Packard ;) Nevermind, just the geek side of
me showing....
Mike Baney
--- In az_vjc@y..., "David R. W. Withers" <dr_ww@h...> wrote:
> HP means nothing in rock crawling, How much Torque
>
> -----Original Message-----
> From: Baja Fleg [mailto:fleigle@h...]
> Sent: Wednesday, December 26, 2001 1:23 PM
> To: az_vjc@y...
> Subject: Re: [az_vjc] one bad *** tj motor
>
>
> Not to brag :) David but I'm getting 210hp out of a warmed over 4
> cylinder VW motor!!
>
> Michael
>
>
> ----Original Message Follows----
> how about 275 HP and 350 lb/ft of torque
> http://www.4x4review.com/feature/ultimate-tj2.asp
>
> David R. W. Withers
> Desk: 480.551.4667
> Mobile: 480.215.6992
>
>
>
>
> __________________________________________________ _______________
> Send and receive Hotmail on your mobile device:
http://mobile.msn.com
>
>
>
>
> Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
38043 From: TRobertsRN <TRobertsRN@e...>
Date: Wed Dec 26, 2001 1:24pm
Subject: Re: So what did everyone get for christmas
The best thing I got was before Christmas on my birthday the 20th. I got a
1961 Cherokee, a 1983 Cherokee, and a 1981 Cherokee. How is this possible
you ask? I married my Cherokee/Scottish girlfriend in St. Thomas on a week
long cruise and now have tow step daughters 18 and 20 years old. My 78
Cherokee Wide Trac is number 4 in my life now. And no the other Cherokee's
are not Wide Trac's.
Tom
> OK all,
>
> Meryy christmas......my family is still asleep and I want o know what
> goodies jSanta brought you all for Christmas
>
>
> Brian Harmon
> 88 XJ Laredo
> http://www.cherokee-nation.com
>
>
> __________________________________________________ _______________
> Get your FREE download of MSN Explorer at
http://explorer.msn.com/intl.asp.
>
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
38044 From: <hillb@s...>
Date: Wed Dec 26, 2001 1:21pm
Subject: RE: one bad *** tj motor
It's torque you want, huh? Take a look at this monster!
http://www.off-road.com/4x4web/features/1999/03/
"David R. W.
Withers" To: <az_vjc@yahoogroups.com>
<dr_ww@hotmai cc:
l.com> Subject: RE: [az_vjc] one bad *** tj motor
12/26/2001
01:55 PM
Please
respond to
az_vjc
HP means nothing in rock crawling, How much Torque
-----Original Message-----
From: Baja Fleg [mailto:fleigle@h...]
Sent: Wednesday, December 26, 2001 1:23 PM
To: az_vjc@yahoogroups.com
Subject: Re: [az_vjc] one bad *** tj motor
Not to brag :) David but I'm getting 210hp out of a warmed over 4
cylinder VW motor!!
Michael
----Original Message Follows----
how about 275 HP and 350 lb/ft of torque
http://www.4x4review.com/feature/ultimate-tj2.asp
David R. W. Withers
Desk: 480.551.4667
Mobile: 480.215.6992
__________________________________________________ _______________
Send and receive Hotmail on your mobile device: http://mobile.msn.com
Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
38045 From: AzVJC Website <azvjc@a...>
Date: Wed Dec 26, 2001 1:31pm
Subject: [FS] CD-ROM Drive
Price: $20
Contact: heelshock@hotmail.com
LG CD-ROM Drive, Model: CRD-8483B, Replaced with CD-RW, Maybe somebody needs one.
Bradlee Clark
38046 From: David R. W. Withers <dr_ww@h...>
Date: Wed Dec 26, 2001 1:32pm
Subject: RE: one bad *** tj motor
Nice 90K ride, if I was to spend that much I'd of got a Cummins turbo
diesel.
-----Original Message-----
From: hillb@s... [mailto:hillb@s...]
Sent: Wednesday, December 26, 2001 2:21 PM
To: az_vjc@yahoogroups.com
Cc: az_vjc@yahoogroups.com
Subject: RE: [az_vjc] one bad *** tj motor
It's torque you want, huh? Take a look at this monster!
http://www.off-road.com/4x4web/features/1999/03/
"David R. W.
Withers" To:
<az_vjc@yahoogroups.com>
<dr_ww@hotmai cc:
l.com> Subject: RE: [az_vjc] one
bad *** tj motor
12/26/2001
01:55 PM
Please
respond to
az_vjc
HP means nothing in rock crawling, How much Torque
-----Original Message-----
From: Baja Fleg [mailto:fleigle@h...]
Sent: Wednesday, December 26, 2001 1:23 PM
To: az_vjc@yahoogroups.com
Subject: Re: [az_vjc] one bad *** tj motor
Not to brag :) David but I'm getting 210hp out of a warmed over 4
cylinder VW motor!!
Michael
----Original Message Follows----
how about 275 HP and 350 lb/ft of torque
http://www.4x4review.com/feature/ultimate-tj2.asp
David R. W. Withers
Desk: 480.551.4667
Mobile: 480.215.6992
__________________________________________________ _______________
Send and receive Hotmail on your mobile device: http://mobile.msn.com
Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
38047 From: jeepin_in_az <jeepin_in_az@y...>
Date: Wed Dec 26, 2001 1:36pm
Subject: FrUsTrAtiOn!!!
DAMN IT!!! Every 4x4 place I have called is closed untill after the
1st! It really pisses me off, I want RE upper adjust control arms,
Tera bushings for the lowers. I called ToyBox last week, left a
message, and no return call. Also called BigOffroad, same thing. I
did get a hold of Gorferitoffroad and ordered my 1" MM lift. $45
plus $9.50 shipping! Pretty good deal! Also got a hold of ORU to
see if they had any bushings, nope, have to order from Teraflex, and
they are closed till the 2nd.....
Oh well, guess they don't want my money.....;)
Mike Baney
38048 From: Joe W <arizonajeep@h...>
Date: Wed Dec 26, 2001 1:40pm
Subject: RE: Re: SYE Install
That's only because Dan had to use a sawzall and the jaws-of-life just to
get all the twisted sheetmetal out of the way so he could GET to his
transfer case. <grin>
Joe West
> -----Original Message-----
> From: jetowle2000 [mailto:James.Towle@a...]
> Sent: Wednesday, December 26, 2001 1:01 PM
> To: az_vjc@yahoogroups.com
> Subject: [az_vjc] Re: SYE Install
>
>
>
> Dan C. said, it took almost as much time getting the transfer case in
> and out as it did putting the SYE in. He was working by himself
> though.
>
> --James
>
> --- In az_vjc@y..., "DesertJeep" <joey@d...> wrote:
> > There you have it. Joe having said that means that leaving it in is
> the
> > way to go!
> >
> > Just kidding. I could not resist. LOL.
> >
> > If it were mine to do I would yank it out and bench fit the SYE. The
> > first time. I'd want to do this to learn more of how it works and
> upside
> > down with bad angles would be tough. But on my second install I
> probably
> > leave it in if possible.
> > Just my opinion.
> > Joey K
> >
> > > -----Original Message-----
> > > From: Joe W [mailto:arizonajeep@h...]
> > > Sent: Wednesday, December 26, 2001 12:26 PM
> > > To: az_vjc@y...
> > > Subject: RE: [az_vjc] Re: SYE Install
> > >
> > >
> > > Mike,
> > >
> > > I would recommend that you pull the transfer case before
> > > modifying it. I think you'll find the job much easier to do
> > > that way... and the time to take the transfer case out and
> > > put it back in is less than 30 minutes. I'd recommend that
> > > you do yourself a favor and just take it completely out
> > > before cracking it open.
> > >
> > > Joe West
> > >
> > > > -----Original Message-----
> > > > From: jeepin_in_az [mailto:jeepin_in_az@y...]
> > > > Sent: Wednesday, December 26, 2001 10:35 AM
> > > > To: az_vjc@y...
> > > > Subject: [az_vjc] Re: SYE Install
> > > >
> > > >
> > > > Thanks Joe!
> > > >
> > > > Mike
> > > >
> > > > --- In az_vjc@y..., "Joe W" <arizonajeep@h...> wrote:
> > > > > Mike,
> > > > >
> > > > > I doubt you'll have any problems...but if you run into any on
> > > > Friday, give
> > > > > me a call (602) 524-7632. I have the day off and would
> > > be happy to
> > > > help.
> > > > >
> > > > > Joe West
> > > > >
> > > > > > -----Original Message-----
> > > > > > From: jeepin_in_az [mailto:jeepin_in_az@y...]
> > > > > > Sent: Wednesday, December 26, 2001 9:57 AM
> > > > > > To: az_vjc@y...
> > > > > > Subject: [az_vjc] Re: SYE Install
> > > > > >
> > > > > >
> > > > > > We both go the nice kit, take apart the tcase kind. I was
> > > > thinking
> > > > > > of stealing your tcase from Chris....and giving him mine, I
> only
> > > > have
> > > > > > around 20,000 miles.
> > > > > >
> > > > > > Mike
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > > --- In az_vjc@y..., "Joe W" <arizonajeep@h...> wrote:
> > > > > > > Mike,
> > > > > > >
> > > > > > > What kind of SYE did you purchase? Cut and tap output
> shaft
> > > > kind
> > > > > > or take
> > > > > > > apart the transfer case and install kind?
> > > > > > >
> > > > > > > Joe West
> > > > > > >
> > > > > > > > -----Original Message-----
> > > > > > > > From: jeepin_in_az [mailto:jeepin_in_az@y...]
> > > > > > > > Sent: Wednesday, December 26, 2001 8:27 AM
> > > > > > > > To: az_vjc@y...
> > > > > > > > Subject: [az_vjc] SYE Install
> > > > > > > >
> > > > > > > >
> > > > > > > > Any last minute advice on installing a SYE on a TJ?
> James T
> > > > and I
> > > > > > > > will be installing our sye's on Friday. James, did you
> find
> > > > > > anyone
> > > > > > > > to take pics yet? Anyone want to come over and
> document and
> > > > photo
> > > > > > > > the install? We will be starting at 8:00 am at my
> brothers
> > > > yard,
> > > > > > off
> > > > > > > > Currie between Rural and McClintock.
> > > > > > > >
> > > > > > > > Mike Baney
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > > Your use of Yahoo! Groups is subject to
> > > > > > > > http://docs.yahoo.com/info/terms/
> > > > > > > >
> > > > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > > Your use of Yahoo! Groups is subject to
> > > > > http://docs.yahoo.com/info/terms/
> > > >
> > > >
> > > >
> > > >
> > > > Your use of Yahoo! Groups is subject to
> > > http://docs.yahoo.com/info/terms/
> > >
> > >
> > >
> > >
> > >
> > > Your use of Yahoo! Groups is subject to
> > > http://docs.yahoo.com/info/terms/
> > >
> > >
>
>
>
>
> Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
38049 From: Baja Fleg <fleigle@h...>
Date: Wed Dec 26, 2001 1:43pm
Subject: RE: one bad *** VW motor
Can't say I do much rockcrawling, not even in the TJ. Can't stand it myself
I'm more into sand and desert running. I'll see if I can find the dyno
sheet again if you really want the torque numbers as I don't remember them
right off the bat. How much you think that ultimate TJ is going to run
anyway? I bet it clears 50K easy when done.
Michael
----Original Message Follows----
Nice 90K ride, if I was to spend that much I'd of got a Cummins turbo
diesel.
-----Original Message-----
From: hillb@s... [mailto:hillb@s...]
Sent: Wednesday, December 26, 2001 2:21 PM
To: az_vjc@yahoogroups.com
Cc: az_vjc@yahoogroups.com
Subject: RE: [az_vjc] one bad *** tj motor
It's torque you want, huh? Take a look at this monster!
http://www.off-road.com/4x4web/features/1999/03/
"David R. W.
Withers" To:
<az_vjc@yahoogroups.com>
<dr_ww@hotmai cc:
l.com> Subject: RE: [az_vjc] one
bad *** tj motor
12/26/2001
01:55 PM
Please
respond to
az_vjc
HP means nothing in rock crawling, How much Torque
-----Original Message-----
From: Baja Fleg [mailto:fleigle@h...]
Sent: Wednesday, December 26, 2001 1:23 PM
To: az_vjc@yahoogroups.com
Subject: Re: [az_vjc] one bad *** tj motor
Not to brag :) David but I'm getting 210hp out of a warmed over 4
cylinder VW motor!!
Michael
----Original Message Follows----
how about 275 HP and 350 lb/ft of torque
http://www.4x4review.com/feature/ultimate-tj2.asp
David R. W. Withers
Desk: 480.551.4667
Mobile: 480.215.6992
__________________________________________________ _______________
Send and receive Hotmail on your mobile device: http://mobile.msn.com
Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
Michael Fleigle
Http://members.xoom.com/Fleg
__________________________________________________ _______________
Send and receive Hotmail on your mobile device: http://mobile.msn.com
38050 From: David R. W. Withers <dr_ww@h...>
Date: Wed Dec 26, 2001 1:46pm
Subject: RE: FrUsTrAtiOn!!!
Give Jay @ toybox till the end of the day. But I don't think they carry
anything in stock.
-----Original Message-----
From: jeepin_in_az [mailto:jeepin_in_az@y...]
Sent: Wednesday, December 26, 2001 2:37 PM
To: az_vjc@yahoogroups.com
Subject: [az_vjc] FrUsTrAtiOn!!!
DAMN IT!!! Every 4x4 place I have called is closed untill after the
1st! It really pisses me off, I want RE upper adjust control arms, Tera
bushings for the lowers. I called ToyBox last week, left a message, and
no return call. Also called BigOffroad, same thing. I did get a hold
of Gorferitoffroad and ordered my 1" MM lift. $45 plus $9.50 shipping!
Pretty good deal! Also got a hold of ORU to see if they had any
bushings, nope, have to order from Teraflex, and they are closed till
the 2nd.....
Oh well, guess they don't want my money.....;)
Mike Baney
Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
38051 From: David R. W. Withers <dr_ww@h...>
Date: Wed Dec 26, 2001 1:46pm
Subject: Anyone see or here about the jeep that rolled last weekend on the 60?
David R. W. Withers
Desk: 480.551.4667
Mobile: 480.215.6992
38052 From: David R. W. Withers <dr_ww@h...>
Date: Wed Dec 26, 2001 1:50pm
Subject: RE: one bad *** VW motor
True
Where do you find sand?,,, anywhere near phoenix?
-----Original Message-----
From: Baja Fleg [mailto:fleigle@h...]
Sent: Wednesday, December 26, 2001 2:43 PM
To: az_vjc@yahoogroups.com
Subject: RE: [az_vjc] one bad *** VW motor
Can't say I do much rockcrawling, not even in the TJ. Can't stand it
myself I'm more into sand and desert running. I'll see if I can find
the dyno sheet again if you really want the torque numbers as I don't
remember them right off the bat. How much you think that ultimate TJ is
going to run anyway? I bet it clears 50K easy when done.
Michael
----Original Message Follows----
Nice 90K ride, if I was to spend that much I'd of got a Cummins turbo
diesel.
-----Original Message-----
From: hillb@s... [mailto:hillb@s...]
Sent: Wednesday, December 26, 2001 2:21 PM
To: az_vjc@yahoogroups.com
Cc: az_vjc@yahoogroups.com
Subject: RE: [az_vjc] one bad *** tj motor
It's torque you want, huh? Take a look at this monster!
http://www.off-road.com/4x4web/features/1999/03/
"David R. W.
Withers" To:
<az_vjc@yahoogroups.com>
<dr_ww@hotmai cc:
l.com> Subject: RE: [az_vjc] one
bad *** tj motor
12/26/2001
01:55 PM
Please
respond to
az_vjc
HP means nothing in rock crawling, How much Torque
-----Original Message-----
From: Baja Fleg [mailto:fleigle@h...]
Sent: Wednesday, December 26, 2001 1:23 PM
To: az_vjc@yahoogroups.com
Subject: Re: [az_vjc] one bad *** tj motor
Not to brag :) David but I'm getting 210hp out of a warmed over 4
cylinder VW motor!!
Michael
----Original Message Follows----
how about 275 HP and 350 lb/ft of torque
http://www.4x4review.com/feature/ultimate-tj2.asp
David R. W. Withers
Desk: 480.551.4667
Mobile: 480.215.6992
__________________________________________________ _______________
Send and receive Hotmail on your mobile device: http://mobile.msn.com
Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
Michael Fleigle
Http://members.xoom.com/Fleg
__________________________________________________ _______________
Send and receive Hotmail on your mobile device: http://mobile.msn.com
Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/