PDA

View Full Version : Eaton Elocker D44


GunPilot
10-13-2006, 10:06 PM
For sale (or trade): Brand new Eaton Elocker for Dana 44, 3.73 and down carrier. Never been installed, with wiring harness and switch. P/N 19695.

I ordered a 4:10 Dana 60 Elocker, and this is what they sent. I was in Iraq at the time, and months later when I got home and found out the mistake it was too late for a refund. Goes for over $750, I'll take $600 or trade for something good. Whatcha got?
http://www.autoinsanity.com/misc/131_0409_lok_01_z.jpg

I would trade for something like a D44 front axle set up for a Cherokee, or some kind of selectable locker for a D44 4.10 and up, stuff like that.

Thanks,

George

DsrtJeeper
10-14-2006, 01:03 AM
You have a PM. :) I assume that 3:73 and lower means that 4:56 gears will work? 4:56 gears are lower unless they mean numerically. In which case; I have no idea why someone would want 3:73 or lower gears for wheeling. ???

GunPilot
10-14-2006, 07:07 AM
No, unfortunately it means 3.73 and lower numerically. It would be good for someone who wanted to keep their stock ratios but wanted a selectable locker. If it went the other way I would keep it and slam it in the Waggy's rear D44 along with some 4.56s :)


PM answered.

YJINAZ
10-14-2006, 07:44 AM
Keep the locker

They now have THICK gears that will allow 4.56 and 4.88 and 4.11 on the 3.73 carrier.

http://www.4wheelerssupply.com/catalog/product_info.php/products_id/1745?osCsid=42890c5cee9ca7c2dc8984cdf4004b84

GunPilot
10-14-2006, 04:10 PM
So they do! Thanks for the info. I guess I had heard something about that but never followed up. Thanks for the interest Dsrtjeeper. I guess I'll keep it.

DsrtJeeper
10-15-2006, 09:44 AM
So they do! Thanks for the info. I guess I had heard something about that but never followed up. Thanks for the interest Dsrtjeeper. I guess I'll keep it.

No problem. Thanks for helping me find a selectable locker at a decent price. I had been mulling around different options and trying to avoid air compressors and air lines. I found these new online for $650.00. Seems like a bargain compared to other selectables. :)

Keith Haw
10-16-2006, 03:44 PM
Keep the locker

They now have THICK gears that will allow 4.56 and 4.88 and 4.11 on the 3.73 carrier.

http://www.4wheelerssupply.com/catalog/product_info.php/products_id/1745?osCsid=42890c5cee9ca7c2dc8984cdf4004b84

They sure do. I have a set of 4.10's sitting in the shed for a d44 that I've had for a couple years now.
Keith