Converting to 1 ton TRE's

[YJINAZ]

OK I have a Dana 44 with Hi Steer Arms. Now they are drilled for stock Scout Tie rods and Stock YJ Drag Link. Do they need to be re-drilled to fit the 1 Ton TRE's and how much does it cost and do I have to remove them from the jeep?
Thanks

[UNSTUCK]

I belive they are the same tapper, but a larger hole. ie, the reamer goes further into the hole. I just did this not long ago. I have the reamer you want. Do not bolt your arms to the knuckle yet. Drill the holes first. I think the reamer cost me $65. You can use mine and save your cash.
http://virtualjeepclub.com/attachment.php?attachmentid=7396&stc=1&d=1158894465
I can't tell you how much I love this set up. Drives great no bump steer. Super strong and even looks good too.

[desertfabmotors]

OK I have a Dana 44 with Hi Steer Arms. Now they are drilled for stock Scout Tie rods and Stock YJ Drag Link. Do they need to be re-drilled to fit the 1 Ton TRE's and how much does it cost and do I have to remove them from the jeep?
Thanks


Don,

Yes the hole needs to drilled larger and retapered. If you pull your arms off I can do this for you.

Todd