blooddrive
01-03-2004, 08:39 PM
31523-31547
31523 From: <paparoach@q...>
Date: Sat Sep 22, 2001 9:42am
Subject: Re: [WTB] Wanted stock endcap from a TJ front bumper...
John,
I have a pair you can have.
Just let me know.
Les R
--- In az_vjc@y..., trmn8rjn98@a... wrote:
> Hi All my dad managed to munch the one on his. It is the drivers
side
> if not interchangeable. Anyone have one real cheap or free?
> Thanks
> John
--------------------------------------------------------------------------------
ADVERTISEMENT
31524 From: Scott Kruize <scottkruize@e...>
Date: Sat Sep 22, 2001 10:16am
Subject: RE: OT: Bachelor Party on Saturday night
For those that inquired come on over at or after 8pm tonight. The address is 3846 W Royal Palm Rd. If you go north on 39th Ave from Northern take the first right after the community church. Phil's house is on the north side of the street and should be the 3rd house (the only one with an enclosed garage).
Scott
-----Original Message-----
From: Scott Kruize [mailto:scottkruize@earthlink.net]
Sent: Thursday, September 20, 2001 11:47 PM
To: Phil Branson; AZ_VJC
Subject: [az_vjc] OT: Bachelor Party on Saturday night
Hello!
My best man is throwing me a bachelor party on Saturday night. Any of you fellow AZVJC guys that want to come out are more than welcome. I've made friends with so many of you that I'd like to invite you all. Even those of you that I may have PO'd at one time or another ;) I've only got 2 short weeks left until I'm shackled and possibly never heard from again.
Please contact Phil sometime on Friday and let him know if you are coming over so he can forward you directions and make final preparations if you know what I mean. He lives near Northern and 39th Ave.
pbranson2@home.com 602-708-7445
Regards,
Scott
"Daddy Longlegs"
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
31525 From: AzVJC Website <azvjc@a...>
Date: Sat Sep 22, 2001 11:53am
Subject: [FS] Ford 9" 28 spline shafts
Price: $25
Contact: 480-332-5704
Pair of used ford 9" axle shafts, 28 spline, 5 on 5.5. Needs new bearings.
Dan Coley
31526 From: <g_rob_williams@y...>
Date: Sat Sep 22, 2001 11:58am
Subject: Scotts Pavillions
Okay, how many people are going to be out at the Scottsdale
Pavilions, what time? and how do I get there from say... gilbert
taking the 101 north! -Rob
31527 From: Steve Meyer <steve.j.meyer@h...>
Date: Sat Sep 22, 2001 0:09pm
Subject: Re: [FS] Ford 9" 28 spline shafts
Are these from an Early Bronco? What year? Big Bearing...3300lb Axle?
--Steve
----- Original Message -----
From: AzVJC Website
To: AzVJC
Sent: Saturday, September 22, 2001 6:53 PM
Subject: [az_vjc] [FS] Ford 9" 28 spline shafts
Price: $25
Contact: 480-332-5704
Pair of used ford 9" axle shafts, 28 spline, 5 on 5.5. Needs new bearings.
Dan Coley
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
31528 From: AzVJC Website <azvjc@a...>
Date: Sat Sep 22, 2001 0:42pm
Subject: [FS] 6x9" Pioneer Speakers/Boxes
Price: $70 OBO
Contact: jakewagner@yahoo.com
2- 3 way 6x9" Pioneer Speakers in the 6x9 boxes. Top of the line, bought new from Best Buy for $130.
Jake
31529 From: Domonic Corradin <go_tpls@h...>
Date: Sat Sep 22, 2001 0:47pm
Subject: Give a gimp a vote!
Hey all,
I just entered the Optima Challange and I am looking for some local support. Hook this gimp up. You may have seen me at the Tanks on the First Tax collector Run. Green TJ Wheelchair in the Back on the 4.0-5.0(I think that was the trail out to the Firebird).
31530 From: <jeepin_in_az@y...>
Date: Sat Sep 22, 2001 0:52pm
Subject: Re: Scotts Pavillions
We are going to go...
Take the 101 north to Indian Bend, and take a left, then look for the
McDonalds on your right.
WHAT TIME if anyone else is going???? Meet around 7:00??
Mike Baney
480-628-0204
--- In az_vjc@y..., g_rob_williams@y... wrote:
> Okay, how many people are going to be out at the Scottsdale
> Pavilions, what time? and how do I get there from say... gilbert
> taking the 101 north! -Rob
31531 From: Eric Herring <herring@q...>
Date: Sat Sep 22, 2001 1:16pm
Subject: RE: Re: Scotts Pavillions
I think I can go. Someone should probably go there early & get us a spot, it
fills up pretty quick.
Eric Herring 92XJ
-----Original Message-----
From: jeepin_in_az@y... [mailto:jeepin_in_az@y...]
Sent: Saturday, September 22, 2001 12:52 PM
To: az_vjc@yahoogroups.com
Subject: [az_vjc] Re: Scotts Pavillions
We are going to go...
Take the 101 north to Indian Bend, and take a left, then look for the
McDonalds on your right.
WHAT TIME if anyone else is going???? Meet around 7:00??
Mike Baney
480-628-0204
--- In az_vjc@y..., g_rob_williams@y... wrote:
> Okay, how many people are going to be out at the Scottsdale
> Pavilions, what time? and how do I get there from say... gilbert
> taking the 101 north! -Rob
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
31532 From: <jeepindog@y...>
Date: Sat Sep 22, 2001 2:20pm
Subject: RE lift party
Hey all,
I got a number of offers to help wrench the new lift onto the
TJ, and I appreciate ALL of it! Chris Krieg, Mike Baney, Dave
O'Boyle, all seem to live sort of nearby. I live in Ahwatukee, but I
live in an apartment also, so I have no garage available to work in.
I am at Ray Road and 40th Street. My kit should be in this week. I
ordered a short shaft kit, and that probably won't ship until next
Friday, which means it'll be in my hands in about 10-12 days. I
haven't ordered a d/s yet, because I am still trying to decide on who
to have build it for me.
Question #1: Can we install the lift WITHOUT the sye and d/s,
and still have the Jeep driveable? I won't be going offroading until
I get tires anyway, so will this work? Or should we (read "must we")
wait until the sye and d/s are all installed at the same time? (I'm
planning on getting some 35x12.50 MTRs! It's not a daily driver.)
Question #2: How much longer does my new d/s have to be, taking
into consideration the sye which shortens the t-case output shaft by
about 4.5", combined with the 4.5" lift? Does the lift height factor
in, or just the sye, when measuring d/s length? And what special
ends does the new d/s have to have to mate up with the output shaft
and the rear axle? Oh, my head...
:) Isn't this fun?
Lachlan
31533 From: DougB <azjeep@h...>
Date: Sat Sep 22, 2001 4:11pm
Subject: Re: Re: Well...I finally broke down and bought a....
Correct. Must be either in a holster or in a case or box.
----- Original Message -----
From: "Mike Foster" <mesa@s...>
To: <az_vjc@yahoogroups.com>
Sent: Wednesday, September 19, 2001 5:37 PM
Subject: [az_vjc] Re: Well...I finally broke down and bought a....
> My understanding is as long as it is holstered or in a glove box it
> is fine.I will look in AZ handgun book and get back with you on the
> laws.They just do not want you having it where you can just grab and
> shoot.
>
> m.foster
>
>
>
> --- In az_vjc@y..., "Joe W" <arizonajeep@h...> wrote:
> > Handgun.
> >
> > I suspect, like many Americans; I was pushed over the top by the
> latest
> > round of violence. While I don't yet know if I will ever carry
> concealed, I
> > am taking a conceal carry class next week. I figure the training
> will be
> > good since it has been almost 30 years since I had formal training
> on a .45
> > caliber handgun. The idiot who killed the owner of my favorite gas
> station
> > last week was the straw that broke the camels back...
> >
> > Jeep content: Those of you who have handguns, where do you carry
> them when
> > you are in your Jeep? It is my understanding that as long as they
> are in a
> > holster, you can carry them pretty much anywhere (the gentleman at
> the gun
> > store told me this).
> >
> > Since this is weak in the Jeep content arena, please feel free to
> contact me
> > directly.
> >
> >
> > Kind Regards,
> >
> > Joe West
>
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
31534 From: DougB <azjeep@h...>
Date: Sat Sep 22, 2001 4:14pm
Subject: Re: roll bar pads
Got mine from 4 Wheeler Supply on E. Washington - Phoenix.
----- Original Message -----
From: TRobertsRN
To: az_vjc@yahoogroups.com
Sent: Thursday, September 20, 2001 12:53 PM
Subject: [az_vjc] roll bar pads
I had OR FAB put a roll cage in the Cherokee. I am in need of some pads for same. I am in Mesa near Power and Brown. Where should I go shopping for these. I am also looking for straps to attach to roll cage for passengers to grab. My girlfriend calls these OH SH*T handles.
Tom
78 Cherokee Wide Trac
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
31535 From: <jeepin_in_az@y...>
Date: Sat Sep 22, 2001 4:26pm
Subject: Re: RE lift party
I have my sye sitting in my garage, still have not put it in yet, so
no, you don't have to wait, but we will but the t-case drop in until
the sye goes in. I am planning on doing the sye, then drive down to
Dicks in 4 hi, and having him measure and make it on the spot. James
Towle had a new shaft made by Dick...opinions James?
I have a access to a garage at my brothers house, who lives behind
me, Chris has a garage, David? Where does David live? you up to
hosting it?
Mike Baney
--- In az_vjc@y..., jeepindog@y... wrote:
> Hey all,
>
> I got a number of offers to help wrench the new lift onto the
> TJ, and I appreciate ALL of it! Chris Krieg, Mike Baney, Dave
> O'Boyle, all seem to live sort of nearby. I live in Ahwatukee, but
I
> live in an apartment also, so I have no garage available to work
in.
> I am at Ray Road and 40th Street. My kit should be in this week.
I
> ordered a short shaft kit, and that probably won't ship until next
> Friday, which means it'll be in my hands in about 10-12 days. I
> haven't ordered a d/s yet, because I am still trying to decide on
who
> to have build it for me.
>
> Question #1: Can we install the lift WITHOUT the sye and d/s,
> and still have the Jeep driveable? I won't be going offroading
until
> I get tires anyway, so will this work? Or should we (read "must
we")
> wait until the sye and d/s are all installed at the same time?
(I'm
> planning on getting some 35x12.50 MTRs! It's not a daily driver.)
>
> Question #2: How much longer does my new d/s have to be,
taking
> into consideration the sye which shortens the t-case output shaft
by
> about 4.5", combined with the 4.5" lift? Does the lift height
factor
> in, or just the sye, when measuring d/s length? And what special
> ends does the new d/s have to have to mate up with the output shaft
> and the rear axle? Oh, my head...
>
> :) Isn't this fun?
>
> Lachlan
31536 From: AzVJC Website <rickandvanda@p...>
Date: Sat Sep 22, 2001 4:44pm
Subject: [TR] Table Mesa Area - Saturday, September 22, 2001
Hello All,
Rick Norman is leading a Table Mesa Area trail run on Saturday, September 22, 2001.
When: Meet at 6:30.......Depart around 7pm
Where: Go north on I-17 to Table Mesa rd exit. Go west off I-17 approx 1/4 mile to meet/airdown spot
Rating: 2.0+
Length: 4 hours
CB Channel: 4
Last minute night run to test out some new mods. Thinkin' maybe Upper Terminator &; Upper Raw Deal backwards. No, not in reverse. See ya there!!
There are a number of trails in this area; some of the most difficult trails in Arizona can be found here. There are also moderate and easy trails to be found. There are also ghost towns and old mines to explore in this area.
Here is an incomplete list of trails that may be found.
Anaconda
Predator
Raw Deal (Lower)
Raw Deal (Upper)
Terminator (Lower)
Terminator (Upper)
Tip Top Mine
Gillette
Milk Ranch
Click Here To Add Your Name to the Sign Up List
Thank You,
- The AzVJC Website
31537 From: James Towle <James.Towle@a...>
Date: Sat Sep 22, 2001 4:43pm
Subject: Re: RE lift party
--- In az_vjc@y..., jeepin_in_az@y... wrote:
> I am planning on doing the sye, then drive down to
> Dicks in 4 hi, and having him measure and make it on the spot.
James
> Towle had a new shaft made by Dick...opinions James?
The guys at Dick's are great. You probably should phone ahead and
make sure they aren't too busy. When and if I do mine this, the way
Mike is doing his, will be the way I do it.
Does the SYE really shorten the output shaft 4.5"? If this is true
that would make my driveshaft 17+", heck, that almost like having a
SWB truck :).
--James
31538 From: James Towle <James.Towle@a...>
Date: Sat Sep 22, 2001 4:51pm
Subject: TJ Front Bumper drawing
For anybody that is interested I have AutoCAD drawing for a TJ front bumper.
The length on it is 47". Nothing extraordinary about it I am having someone
make me one to match my Olympic rear bumper. The drawing might be a good
starting point for stock hole locations for anyone wanting to make their own
bumper design.
Let me know, maybe I'll post it just for future reference.
--James
31539 From: The Madbrits <madbrit@c...>
Date: Sat Sep 22, 2001 4:58pm
Subject: Dana 20
Can one flat tow (all 4 down) with a Dana 20 transfer case. What proceedures need to be taken. I have heard of engaging one front hub to turn the gears through drag in the spider gears to lube the output shaft bearing. Anyone know anything? Thanks.
Peter.
31540 From: <sharxjeep@c...>
Date: Sat Sep 22, 2001 1:29pm
Subject: Tera Low
Well its in and working, I want to thank Scott, Dan, Rick for all the input and help. Scott took a few pics that will be posted so that in the future everyone will be able to see where the fork needs to be cut. But after alot of bad language and thrown tools shes up and going again.
Once again thanks to everyone
Sharky
31541 From: James Towle <James.Towle@a...>
Date: Sat Sep 22, 2001 5:39pm
Subject: RE: TJ Front Bumper drawing
Dan,
You can download it here:
http://groups.yahoo.com/group/az_vjc/files/TJ%20Fornt%20Bumper/
There is an AutoCAD 14 dwg file format and a dxf file there.
I made it 47" because of looking at the bumper I have now and seeing where
all the rocks hit.
--James
> -----Original Message-----
> From: Dan Coley [mailto:Nolen.Coley@a...]
> Sent: Saturday, September 22, 2001 5:07 PM
> To: James Towle
> Subject: Re: TJ Front Bumper drawing
>
>
> Hey James, email it over if you get a chance. Just curious as too
> it's construction.
>
> Dan
>
> --- In az_vjc@y..., "James Towle" <James.Towle@a...> wrote:
> >
> > For anybody that is interested I have AutoCAD drawing for a TJ
> front bumper.
> > The length on it is 47". Nothing extraordinary about it I am having
> someone
> > make me one to match my Olympic rear bumper. The drawing might be a
> good
> > starting point for stock hole locations for anyone wanting to make
> their own
> > bumper design.
> >
> > Let me know, maybe I'll post it just for future reference.
> >
> > --James
>
31542 From: Greg Stapley <love24wheel@h...>
Date: Sat Sep 22, 2001 5:51pm
Subject: I need to correct my bumpsteer
Hey guys I am selling my jeep to buy another one, but I need to correct the little things that I have learned to live with, the biggest is bumpsteer, I can't do highcross steering cause I still have the reverse cut dana 30 and I can't find a bent or reinforced draglink to use. any suggestions or help would be greatly appreciated. it's a 95 with about 8 inches on it. thanks late
Greg
Late,
Greg
--------------------------------------------------------------------------------
Get your FREE download of MSN Explorer at http://explorer.msn.com
31543 From: <monosyllabicguy@w...>
Date: Sat Sep 22, 2001 5:52pm
Subject: Re: RE lift party
when i did my tranny swap, i waited until i had everything back together. then i measured for driveshafts and drove down to dick's. i gave them the front to shorten and the new measurements. they built a brand new rear cv shaft. i left there and went to eat lunch around the corner. i came back about an hour later and they were done! really good work also. this was a saturday afternoon also. id recommend them to anyone
Joey
--- In az_vjc@y..., jeepindog@y... wrote:
> Hey all,
>
> I got a number of offers to help wrench the new lift onto the
> TJ, and I appreciate ALL of it! Chris Krieg, Mike Baney, Dave
> O'Boyle, all seem to live sort of nearby. I live in Ahwatukee, but I
> live in an apartment also, so I have no garage available to work in.
> I am at Ray Road and 40th Street. My kit should be in this week. I
> ordered a short shaft kit, and that probably won't ship until next
> Friday, which means it'll be in my hands in about 10-12 days. I
> haven't ordered a d/s yet, because I am still trying to decide on who
> to have build it for me.
>
> Question #1: Can we install the lift WITHOUT the sye and d/s,
> and still have the Jeep driveable? I won't be going offroading until
> I get tires anyway, so will this work? Or should we (read "must we")
> wait until the sye and d/s are all installed at the same time? (I'm
> planning on getting some 35x12.50 MTRs! It's not a daily driver.)
>
> Question #2: How much longer does my new d/s have to be, taking
> into consideration the sye which shortens the t-case output shaft by
> about 4.5", combined with the 4.5" lift? Does the lift height factor
> in, or just the sye, when measuring d/s length? And what special
> ends does the new d/s have to have to mate up with the output shaft
> and the rear axle? Oh, my head...
>
> :) Isn't this fun?
>
> Lachlan
31544 From: <JNB4PLS@a...>
Date: Sat Sep 22, 2001 5:58pm
Subject: RE Lift wrenching party
My garage is available. It comes complete with a refrigerator;-)I'd
be happy to host this one for Lachlan.
John Butler
31545 From: <jeepindog@y...>
Date: Sat Sep 22, 2001 6:10pm
Subject: Re: RE Lift wrenching party
Thanks John! I will take you up on that one. I'll need a list
of everybody's favorite victuals and beverages, of course. So now we
just need to wait a few days for the big brown van. Does a RE kit
come with t-case spacers?
Dick's sounds like a good place to have a d/s made...
Talk to you all very soon,
Lachlan
In az_vjc@y..., JNB4PLS@a... wrote:
> My garage is available. It comes complete with a refrigerator;-)
I'd
> be happy to host this one for Lachlan.
>
> John Butler
31546 From: Russell Gevarter <gev39@y...>
Date: Sat Sep 22, 2001 6:12pm
Subject: Wagoneer: 360 distributor and spare tire needed
Here's a list of parts I need for my 73 Wagoneer.
Hoping I'll find some here before heading out to the salvage yards.
Russell G. gev39@y...
Absolute needs:
32" tire on a 5 on 5.5 rim (can be any tire. it's a spare)
Distributor for AMC 360 (mine has a hole in the advance diaphram)
Wish list:
Low Range unit for Quadratrac
AC compressor
OEM roof rack
Dash knobs, glove box, 1 interior door handle
Exterior logos
Straight Grill
31547 From: <Fourwhlcrzy@a...>
Date: Sat Sep 22, 2001 2:45pm
Subject: xj alignment
I'm half way done installing 4.5" superflex kit. Was wondering who is good alignment guy in east valley?I've heard of flexy joe but i think he is west side. Long hike from the santans. Thanks for any info.
One more thing-upper control arms really suck!
Daren
01 xj
52 m-38
31523 From: <paparoach@q...>
Date: Sat Sep 22, 2001 9:42am
Subject: Re: [WTB] Wanted stock endcap from a TJ front bumper...
John,
I have a pair you can have.
Just let me know.
Les R
--- In az_vjc@y..., trmn8rjn98@a... wrote:
> Hi All my dad managed to munch the one on his. It is the drivers
side
> if not interchangeable. Anyone have one real cheap or free?
> Thanks
> John
--------------------------------------------------------------------------------
ADVERTISEMENT
31524 From: Scott Kruize <scottkruize@e...>
Date: Sat Sep 22, 2001 10:16am
Subject: RE: OT: Bachelor Party on Saturday night
For those that inquired come on over at or after 8pm tonight. The address is 3846 W Royal Palm Rd. If you go north on 39th Ave from Northern take the first right after the community church. Phil's house is on the north side of the street and should be the 3rd house (the only one with an enclosed garage).
Scott
-----Original Message-----
From: Scott Kruize [mailto:scottkruize@earthlink.net]
Sent: Thursday, September 20, 2001 11:47 PM
To: Phil Branson; AZ_VJC
Subject: [az_vjc] OT: Bachelor Party on Saturday night
Hello!
My best man is throwing me a bachelor party on Saturday night. Any of you fellow AZVJC guys that want to come out are more than welcome. I've made friends with so many of you that I'd like to invite you all. Even those of you that I may have PO'd at one time or another ;) I've only got 2 short weeks left until I'm shackled and possibly never heard from again.
Please contact Phil sometime on Friday and let him know if you are coming over so he can forward you directions and make final preparations if you know what I mean. He lives near Northern and 39th Ave.
pbranson2@home.com 602-708-7445
Regards,
Scott
"Daddy Longlegs"
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
31525 From: AzVJC Website <azvjc@a...>
Date: Sat Sep 22, 2001 11:53am
Subject: [FS] Ford 9" 28 spline shafts
Price: $25
Contact: 480-332-5704
Pair of used ford 9" axle shafts, 28 spline, 5 on 5.5. Needs new bearings.
Dan Coley
31526 From: <g_rob_williams@y...>
Date: Sat Sep 22, 2001 11:58am
Subject: Scotts Pavillions
Okay, how many people are going to be out at the Scottsdale
Pavilions, what time? and how do I get there from say... gilbert
taking the 101 north! -Rob
31527 From: Steve Meyer <steve.j.meyer@h...>
Date: Sat Sep 22, 2001 0:09pm
Subject: Re: [FS] Ford 9" 28 spline shafts
Are these from an Early Bronco? What year? Big Bearing...3300lb Axle?
--Steve
----- Original Message -----
From: AzVJC Website
To: AzVJC
Sent: Saturday, September 22, 2001 6:53 PM
Subject: [az_vjc] [FS] Ford 9" 28 spline shafts
Price: $25
Contact: 480-332-5704
Pair of used ford 9" axle shafts, 28 spline, 5 on 5.5. Needs new bearings.
Dan Coley
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
31528 From: AzVJC Website <azvjc@a...>
Date: Sat Sep 22, 2001 0:42pm
Subject: [FS] 6x9" Pioneer Speakers/Boxes
Price: $70 OBO
Contact: jakewagner@yahoo.com
2- 3 way 6x9" Pioneer Speakers in the 6x9 boxes. Top of the line, bought new from Best Buy for $130.
Jake
31529 From: Domonic Corradin <go_tpls@h...>
Date: Sat Sep 22, 2001 0:47pm
Subject: Give a gimp a vote!
Hey all,
I just entered the Optima Challange and I am looking for some local support. Hook this gimp up. You may have seen me at the Tanks on the First Tax collector Run. Green TJ Wheelchair in the Back on the 4.0-5.0(I think that was the trail out to the Firebird).
31530 From: <jeepin_in_az@y...>
Date: Sat Sep 22, 2001 0:52pm
Subject: Re: Scotts Pavillions
We are going to go...
Take the 101 north to Indian Bend, and take a left, then look for the
McDonalds on your right.
WHAT TIME if anyone else is going???? Meet around 7:00??
Mike Baney
480-628-0204
--- In az_vjc@y..., g_rob_williams@y... wrote:
> Okay, how many people are going to be out at the Scottsdale
> Pavilions, what time? and how do I get there from say... gilbert
> taking the 101 north! -Rob
31531 From: Eric Herring <herring@q...>
Date: Sat Sep 22, 2001 1:16pm
Subject: RE: Re: Scotts Pavillions
I think I can go. Someone should probably go there early & get us a spot, it
fills up pretty quick.
Eric Herring 92XJ
-----Original Message-----
From: jeepin_in_az@y... [mailto:jeepin_in_az@y...]
Sent: Saturday, September 22, 2001 12:52 PM
To: az_vjc@yahoogroups.com
Subject: [az_vjc] Re: Scotts Pavillions
We are going to go...
Take the 101 north to Indian Bend, and take a left, then look for the
McDonalds on your right.
WHAT TIME if anyone else is going???? Meet around 7:00??
Mike Baney
480-628-0204
--- In az_vjc@y..., g_rob_williams@y... wrote:
> Okay, how many people are going to be out at the Scottsdale
> Pavilions, what time? and how do I get there from say... gilbert
> taking the 101 north! -Rob
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
31532 From: <jeepindog@y...>
Date: Sat Sep 22, 2001 2:20pm
Subject: RE lift party
Hey all,
I got a number of offers to help wrench the new lift onto the
TJ, and I appreciate ALL of it! Chris Krieg, Mike Baney, Dave
O'Boyle, all seem to live sort of nearby. I live in Ahwatukee, but I
live in an apartment also, so I have no garage available to work in.
I am at Ray Road and 40th Street. My kit should be in this week. I
ordered a short shaft kit, and that probably won't ship until next
Friday, which means it'll be in my hands in about 10-12 days. I
haven't ordered a d/s yet, because I am still trying to decide on who
to have build it for me.
Question #1: Can we install the lift WITHOUT the sye and d/s,
and still have the Jeep driveable? I won't be going offroading until
I get tires anyway, so will this work? Or should we (read "must we")
wait until the sye and d/s are all installed at the same time? (I'm
planning on getting some 35x12.50 MTRs! It's not a daily driver.)
Question #2: How much longer does my new d/s have to be, taking
into consideration the sye which shortens the t-case output shaft by
about 4.5", combined with the 4.5" lift? Does the lift height factor
in, or just the sye, when measuring d/s length? And what special
ends does the new d/s have to have to mate up with the output shaft
and the rear axle? Oh, my head...
:) Isn't this fun?
Lachlan
31533 From: DougB <azjeep@h...>
Date: Sat Sep 22, 2001 4:11pm
Subject: Re: Re: Well...I finally broke down and bought a....
Correct. Must be either in a holster or in a case or box.
----- Original Message -----
From: "Mike Foster" <mesa@s...>
To: <az_vjc@yahoogroups.com>
Sent: Wednesday, September 19, 2001 5:37 PM
Subject: [az_vjc] Re: Well...I finally broke down and bought a....
> My understanding is as long as it is holstered or in a glove box it
> is fine.I will look in AZ handgun book and get back with you on the
> laws.They just do not want you having it where you can just grab and
> shoot.
>
> m.foster
>
>
>
> --- In az_vjc@y..., "Joe W" <arizonajeep@h...> wrote:
> > Handgun.
> >
> > I suspect, like many Americans; I was pushed over the top by the
> latest
> > round of violence. While I don't yet know if I will ever carry
> concealed, I
> > am taking a conceal carry class next week. I figure the training
> will be
> > good since it has been almost 30 years since I had formal training
> on a .45
> > caliber handgun. The idiot who killed the owner of my favorite gas
> station
> > last week was the straw that broke the camels back...
> >
> > Jeep content: Those of you who have handguns, where do you carry
> them when
> > you are in your Jeep? It is my understanding that as long as they
> are in a
> > holster, you can carry them pretty much anywhere (the gentleman at
> the gun
> > store told me this).
> >
> > Since this is weak in the Jeep content arena, please feel free to
> contact me
> > directly.
> >
> >
> > Kind Regards,
> >
> > Joe West
>
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
31534 From: DougB <azjeep@h...>
Date: Sat Sep 22, 2001 4:14pm
Subject: Re: roll bar pads
Got mine from 4 Wheeler Supply on E. Washington - Phoenix.
----- Original Message -----
From: TRobertsRN
To: az_vjc@yahoogroups.com
Sent: Thursday, September 20, 2001 12:53 PM
Subject: [az_vjc] roll bar pads
I had OR FAB put a roll cage in the Cherokee. I am in need of some pads for same. I am in Mesa near Power and Brown. Where should I go shopping for these. I am also looking for straps to attach to roll cage for passengers to grab. My girlfriend calls these OH SH*T handles.
Tom
78 Cherokee Wide Trac
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
31535 From: <jeepin_in_az@y...>
Date: Sat Sep 22, 2001 4:26pm
Subject: Re: RE lift party
I have my sye sitting in my garage, still have not put it in yet, so
no, you don't have to wait, but we will but the t-case drop in until
the sye goes in. I am planning on doing the sye, then drive down to
Dicks in 4 hi, and having him measure and make it on the spot. James
Towle had a new shaft made by Dick...opinions James?
I have a access to a garage at my brothers house, who lives behind
me, Chris has a garage, David? Where does David live? you up to
hosting it?
Mike Baney
--- In az_vjc@y..., jeepindog@y... wrote:
> Hey all,
>
> I got a number of offers to help wrench the new lift onto the
> TJ, and I appreciate ALL of it! Chris Krieg, Mike Baney, Dave
> O'Boyle, all seem to live sort of nearby. I live in Ahwatukee, but
I
> live in an apartment also, so I have no garage available to work
in.
> I am at Ray Road and 40th Street. My kit should be in this week.
I
> ordered a short shaft kit, and that probably won't ship until next
> Friday, which means it'll be in my hands in about 10-12 days. I
> haven't ordered a d/s yet, because I am still trying to decide on
who
> to have build it for me.
>
> Question #1: Can we install the lift WITHOUT the sye and d/s,
> and still have the Jeep driveable? I won't be going offroading
until
> I get tires anyway, so will this work? Or should we (read "must
we")
> wait until the sye and d/s are all installed at the same time?
(I'm
> planning on getting some 35x12.50 MTRs! It's not a daily driver.)
>
> Question #2: How much longer does my new d/s have to be,
taking
> into consideration the sye which shortens the t-case output shaft
by
> about 4.5", combined with the 4.5" lift? Does the lift height
factor
> in, or just the sye, when measuring d/s length? And what special
> ends does the new d/s have to have to mate up with the output shaft
> and the rear axle? Oh, my head...
>
> :) Isn't this fun?
>
> Lachlan
31536 From: AzVJC Website <rickandvanda@p...>
Date: Sat Sep 22, 2001 4:44pm
Subject: [TR] Table Mesa Area - Saturday, September 22, 2001
Hello All,
Rick Norman is leading a Table Mesa Area trail run on Saturday, September 22, 2001.
When: Meet at 6:30.......Depart around 7pm
Where: Go north on I-17 to Table Mesa rd exit. Go west off I-17 approx 1/4 mile to meet/airdown spot
Rating: 2.0+
Length: 4 hours
CB Channel: 4
Last minute night run to test out some new mods. Thinkin' maybe Upper Terminator &; Upper Raw Deal backwards. No, not in reverse. See ya there!!
There are a number of trails in this area; some of the most difficult trails in Arizona can be found here. There are also moderate and easy trails to be found. There are also ghost towns and old mines to explore in this area.
Here is an incomplete list of trails that may be found.
Anaconda
Predator
Raw Deal (Lower)
Raw Deal (Upper)
Terminator (Lower)
Terminator (Upper)
Tip Top Mine
Gillette
Milk Ranch
Click Here To Add Your Name to the Sign Up List
Thank You,
- The AzVJC Website
31537 From: James Towle <James.Towle@a...>
Date: Sat Sep 22, 2001 4:43pm
Subject: Re: RE lift party
--- In az_vjc@y..., jeepin_in_az@y... wrote:
> I am planning on doing the sye, then drive down to
> Dicks in 4 hi, and having him measure and make it on the spot.
James
> Towle had a new shaft made by Dick...opinions James?
The guys at Dick's are great. You probably should phone ahead and
make sure they aren't too busy. When and if I do mine this, the way
Mike is doing his, will be the way I do it.
Does the SYE really shorten the output shaft 4.5"? If this is true
that would make my driveshaft 17+", heck, that almost like having a
SWB truck :).
--James
31538 From: James Towle <James.Towle@a...>
Date: Sat Sep 22, 2001 4:51pm
Subject: TJ Front Bumper drawing
For anybody that is interested I have AutoCAD drawing for a TJ front bumper.
The length on it is 47". Nothing extraordinary about it I am having someone
make me one to match my Olympic rear bumper. The drawing might be a good
starting point for stock hole locations for anyone wanting to make their own
bumper design.
Let me know, maybe I'll post it just for future reference.
--James
31539 From: The Madbrits <madbrit@c...>
Date: Sat Sep 22, 2001 4:58pm
Subject: Dana 20
Can one flat tow (all 4 down) with a Dana 20 transfer case. What proceedures need to be taken. I have heard of engaging one front hub to turn the gears through drag in the spider gears to lube the output shaft bearing. Anyone know anything? Thanks.
Peter.
31540 From: <sharxjeep@c...>
Date: Sat Sep 22, 2001 1:29pm
Subject: Tera Low
Well its in and working, I want to thank Scott, Dan, Rick for all the input and help. Scott took a few pics that will be posted so that in the future everyone will be able to see where the fork needs to be cut. But after alot of bad language and thrown tools shes up and going again.
Once again thanks to everyone
Sharky
31541 From: James Towle <James.Towle@a...>
Date: Sat Sep 22, 2001 5:39pm
Subject: RE: TJ Front Bumper drawing
Dan,
You can download it here:
http://groups.yahoo.com/group/az_vjc/files/TJ%20Fornt%20Bumper/
There is an AutoCAD 14 dwg file format and a dxf file there.
I made it 47" because of looking at the bumper I have now and seeing where
all the rocks hit.
--James
> -----Original Message-----
> From: Dan Coley [mailto:Nolen.Coley@a...]
> Sent: Saturday, September 22, 2001 5:07 PM
> To: James Towle
> Subject: Re: TJ Front Bumper drawing
>
>
> Hey James, email it over if you get a chance. Just curious as too
> it's construction.
>
> Dan
>
> --- In az_vjc@y..., "James Towle" <James.Towle@a...> wrote:
> >
> > For anybody that is interested I have AutoCAD drawing for a TJ
> front bumper.
> > The length on it is 47". Nothing extraordinary about it I am having
> someone
> > make me one to match my Olympic rear bumper. The drawing might be a
> good
> > starting point for stock hole locations for anyone wanting to make
> their own
> > bumper design.
> >
> > Let me know, maybe I'll post it just for future reference.
> >
> > --James
>
31542 From: Greg Stapley <love24wheel@h...>
Date: Sat Sep 22, 2001 5:51pm
Subject: I need to correct my bumpsteer
Hey guys I am selling my jeep to buy another one, but I need to correct the little things that I have learned to live with, the biggest is bumpsteer, I can't do highcross steering cause I still have the reverse cut dana 30 and I can't find a bent or reinforced draglink to use. any suggestions or help would be greatly appreciated. it's a 95 with about 8 inches on it. thanks late
Greg
Late,
Greg
--------------------------------------------------------------------------------
Get your FREE download of MSN Explorer at http://explorer.msn.com
31543 From: <monosyllabicguy@w...>
Date: Sat Sep 22, 2001 5:52pm
Subject: Re: RE lift party
when i did my tranny swap, i waited until i had everything back together. then i measured for driveshafts and drove down to dick's. i gave them the front to shorten and the new measurements. they built a brand new rear cv shaft. i left there and went to eat lunch around the corner. i came back about an hour later and they were done! really good work also. this was a saturday afternoon also. id recommend them to anyone
Joey
--- In az_vjc@y..., jeepindog@y... wrote:
> Hey all,
>
> I got a number of offers to help wrench the new lift onto the
> TJ, and I appreciate ALL of it! Chris Krieg, Mike Baney, Dave
> O'Boyle, all seem to live sort of nearby. I live in Ahwatukee, but I
> live in an apartment also, so I have no garage available to work in.
> I am at Ray Road and 40th Street. My kit should be in this week. I
> ordered a short shaft kit, and that probably won't ship until next
> Friday, which means it'll be in my hands in about 10-12 days. I
> haven't ordered a d/s yet, because I am still trying to decide on who
> to have build it for me.
>
> Question #1: Can we install the lift WITHOUT the sye and d/s,
> and still have the Jeep driveable? I won't be going offroading until
> I get tires anyway, so will this work? Or should we (read "must we")
> wait until the sye and d/s are all installed at the same time? (I'm
> planning on getting some 35x12.50 MTRs! It's not a daily driver.)
>
> Question #2: How much longer does my new d/s have to be, taking
> into consideration the sye which shortens the t-case output shaft by
> about 4.5", combined with the 4.5" lift? Does the lift height factor
> in, or just the sye, when measuring d/s length? And what special
> ends does the new d/s have to have to mate up with the output shaft
> and the rear axle? Oh, my head...
>
> :) Isn't this fun?
>
> Lachlan
31544 From: <JNB4PLS@a...>
Date: Sat Sep 22, 2001 5:58pm
Subject: RE Lift wrenching party
My garage is available. It comes complete with a refrigerator;-)I'd
be happy to host this one for Lachlan.
John Butler
31545 From: <jeepindog@y...>
Date: Sat Sep 22, 2001 6:10pm
Subject: Re: RE Lift wrenching party
Thanks John! I will take you up on that one. I'll need a list
of everybody's favorite victuals and beverages, of course. So now we
just need to wait a few days for the big brown van. Does a RE kit
come with t-case spacers?
Dick's sounds like a good place to have a d/s made...
Talk to you all very soon,
Lachlan
In az_vjc@y..., JNB4PLS@a... wrote:
> My garage is available. It comes complete with a refrigerator;-)
I'd
> be happy to host this one for Lachlan.
>
> John Butler
31546 From: Russell Gevarter <gev39@y...>
Date: Sat Sep 22, 2001 6:12pm
Subject: Wagoneer: 360 distributor and spare tire needed
Here's a list of parts I need for my 73 Wagoneer.
Hoping I'll find some here before heading out to the salvage yards.
Russell G. gev39@y...
Absolute needs:
32" tire on a 5 on 5.5 rim (can be any tire. it's a spare)
Distributor for AMC 360 (mine has a hole in the advance diaphram)
Wish list:
Low Range unit for Quadratrac
AC compressor
OEM roof rack
Dash knobs, glove box, 1 interior door handle
Exterior logos
Straight Grill
31547 From: <Fourwhlcrzy@a...>
Date: Sat Sep 22, 2001 2:45pm
Subject: xj alignment
I'm half way done installing 4.5" superflex kit. Was wondering who is good alignment guy in east valley?I've heard of flexy joe but i think he is west side. Long hike from the santans. Thanks for any info.
One more thing-upper control arms really suck!
Daren
01 xj
52 m-38