blooddrive
01-03-2004, 08:09 PM
30817-30841
30817 From: <bt88yj@a...>
Date: Sat Sep 8, 2001 5:48pm
Subject: Re: Ghost Town
Harqua Hala Observatory is west of town. One building and some foundations
left.
Some side trails with mine shafts and wood structures left.
Nice run goes from 1300 to 5400 feet.
If you do a search you can find info and directions to get there.
BT
--------------------------------------------------------------------------------
ADVERTISEMENT
30818 From: Eddie Nordstrom <Kilr650@a...>
Date: Sat Sep 8, 2001 10:06pm
Subject: MM/O2 sensor '94 Grand
My brother has a '94 G.C. Laredo with a 4.0L six. It needs motor mounts and probably x-case mount also. What's available aftermarket and hows the price campared to factory?
His "check engine" light is also on. Local shop here in Tucson said he needed an O2 sensor, $202.00 just for the part! Anyone been through this? Can we change it ourselves and if we do will the light go out or does it have to be reset somehow?
TIA
Eddie Nordstrom
30819 From: <azlarry_1@y...>
Date: Sat Sep 8, 2001 10:09pm
Subject: Ghost Town
Thanks for the suggestions everyone.
Larry
30820 From: AzVJC Website <azvjc@a...>
Date: Sat Sep 8, 2001 10:26pm
Subject: [FS] JEEP HARDTOP
Price: $265.00 OR BEST OFFER OR TRADES
Contact: WEEKDAYS 480-940-7263 WEEKENDS/EVENINGS 480-940-7263
ORIGINAL JEEP HARD TOP FOR EARLY WRANGLER (YJ) OR CJ7...GOOD PRICE....DARK PRIMER GREY IN COLOR..TOP IN
GOOD SHAPE...LIFT GATE IN GOOD SHAPE WITH MINOR PITTING (SOLID)
ALL WINDOW GLASS IN GOOD SHAPE...HARDWARE ALL THERE, NO KEY TO
LIFTGATE LOCK. READY TO PAINT.
ASKING $275.00 OR BEST OFFER...WILL CONSIDER TRADING THE
HARDTOP FOR ANY OF THE FOLLOWING:
*** FULL STEEL DOORS FOR MY YJ
*** LIFT KIT (NOT BODY LIFT or SHACKLE LIFT) FOR THE YJ
*** 15" WHEELS (5x4.5 for jeep) AND TIRES (32" or 33")
*** UPPER DOOR SLIDERS FOR STEEL YJ HALF DOORS...SPICE IN COLOR CANVAS OR
FIBERGLASS
Jerry Kryn
30821 From: AzVJC Website <azvjc@a...>
Date: Sat Sep 8, 2001 11:28pm
Subject: [FS] Looking for a good 3-4" complete lift for a 01' TJ
Price: ...
Contact: blainedepue@yahoo.com
I am hoping to find some one that has upgraded there lift to a bigger and better one and has a 3" one that I can take off there hands cheap! I cant afford to get a new one for awhile and I am hoping to find a used but good one! Blaine
Blaine DePue
30822 From: Scott Kruize <scottkruize@e...>
Date: Sun Sep 9, 2001 0:09am
Subject: My TJ flat fender project
Hello!
I have completed the major work on my flat fender. All I need to do now is install some amber lights in the grill and its complete.
Feel free to check out the following photo album of the project without the lights installed:
http://photos.yahoo.com/bc/osmtj/lst?.dir=/Flatfender&.view=t
Scott
30823 From: <cmandrick@h...>
Date: Sun Sep 9, 2001 1:14am
Subject: Re: My TJ flat fender project
Nice purple front D-ring! IMHO you can always cut off some more
metal. I have pics of a cool "chopped" TJ. I'll upload it after
this. The fenders on my POS have been removed for the obvious weight
reduction and lower drag coefficient. ;) I found some really cool
teardrop turn lamps from a vintage speed shop, but they are like 200
bucks... Glad to see the jeep went on a diet,
Chris M
87 YJ
"poopcruiser"
--- In az_vjc@y..., "Scott Kruize" <scottkruize@e...> wrote:
> Hello!
>
> I have completed the major work on my flat fender. All I need to do
now is
> install some amber lights in the grill and its complete.
>
> Feel free to check out the following photo album of the project
without the
> lights installed:
>
> http://photos.yahoo.com/bc/osmtj/lst?.dir=/Flatfender&.view=t
>
> Scott
30824 From: TRobertsRN <TRobertsRN@e...>
Date: Sun Sep 9, 2001 3:55am
Subject: Can't recieve mail
To all who may be attempting send me mail. I can send but not receive. Each time I try to send I get a box that looks like the way I used to sign on years ago. This pops up from time to time. It comes up when I am on line already and just keeps asking me for my login and password which does not work on it. So I can't check for messages. Hopefully it will go away by tomorrow. The box has a message that says "This way to the best of the Internet, type your username and password to connect to this site". It says it is from MSN and I have MSN but it does nothing.
Tom
30825 From: TRobertsRN <TRobertsRN@e...>
Date: Sun Sep 9, 2001 4:15am
Subject: mail working asking advice
Mail working correctly again. Anyone know how I can prevent this from happening or fix it when it does?
Tom
----- Original Message -----
From: TRobertsRN
To: Tish and Art ; thomas.g.roberts@att.net ; Tanya-Marie Seymour ; T Morris ; scorom@uswest.net ; Romig, Scott ; lonna ray ; Kevin Badgley ; Jeanine ; Gwen at work ; Gwen (new) home ; Dan Blair at work ; Betty Barnes Roberts ; 'Betty (new)' ; AzVJC_OT@yahoogroups.com ; az_vjc@yahoogroups.com ; AZ_FSJA@yahoogroups.com
Sent: Sunday, September 09, 2001 3:55 AM
Subject: [AZ_FSJA] Can't recieve mail
To all who may be attempting send me mail. I can send but not receive. Each time I try to send I get a box that looks like the way I used to sign on years ago. This pops up from time to time. It comes up when I am on line already and just keeps asking me for my login and password which does not work on it. So I can't check for messages. Hopefully it will go away by tomorrow. The box has a message that says "This way to the best of the Internet, type your username and password to connect to this site". It says it is from MSN and I have MSN but it does nothing.
Tom
[Non-text portions of this message have been removed]
To unsubscribe from this group, send an email to:
AZ_FSJA-unsubscribe@yahoogroups.com
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
30826 From: Jon Loveless <jonloveless@m...>
Date: Sun Sep 9, 2001 6:00am
Subject: Axle Truss
Take a look at the Superior Axle truss for the D35. Wow. I'm gonna get me one!
http://www.superioraxle.com/_borders/TRUSS_BACK.jpg
Jon Loveless
(480) 816-6240
30827 From: Joe W <arizonajeep@h...>
Date: Sun Sep 9, 2001 6:15am
Subject: RE: My TJ flat fender project
Nice to see you joined the "flat" club...
So is your rig's new nickname "Daddy Flat Fenders" or maybe "Fire-Spider" or how about "Daddy Flat Spider"?
I like what you did much better than the stock setup... Good Job!
Joe West
-----Original Message-----
From: Scott Kruize [mailto:scottkruize@earthlink.net]
Sent: Sunday, September 09, 2001 12:09 AM
To: AZVJC
Subject: [az_vjc] My TJ flat fender project
Hello!
I have completed the major work on my flat fender. All I need to do now is install some amber lights in the grill and its complete.
Feel free to check out the following photo album of the project without the lights installed:
http://photos.yahoo.com/bc/osmtj/lst?.dir=/Flatfender&.view=t
Scott
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
30828 From: Joe W <arizonajeep@h...>
Date: Sun Sep 9, 2001 6:17am
Subject: RE: Need help with spindles
Thanks for the advise Scott... I have a cheapie one as well...
John... Can you go to NAPA and pick up a good one?
Joe
> -----Original Message-----
> From: Scott Legge [mailto:scottlegge@h...]
> Sent: Friday, September 07, 2001 4:12 PM
> To: JNB4PLS@a...; AZVJC
> Subject: Re: [az_vjc] Need help with spindles
>
>
> Just a few words of advise from someone who has taken
> knuckles off before...
> GET A GOOD BALLJOINT SEPARATOR!!! or pickle fork whatever you
> call them.. I
> have a cheapy from autozone and it bent to scrap after the
> first balljoint.
> I grabbed a good steel one from my grandpa and it wasnt a
> problem! The deal
> is you arent just popping one off like steering it has the
> force of two
> joints holding. SO a better scenario would be get 2 and beat
> on the top then
> the bottom and it would keep the force there... Thats
> probably going to be
> your biggest snag hopefully... Best of luck.
>
>
> Scott Legge
>
>
>
> ----- Original Message -----
> From: <JNB4PLS@a...>
> To: <az_vjc@yahoogroups.com>
> Sent: Friday, September 07, 2001 2:48 PM
> Subject: [az_vjc] Need help with spindles
>
>
> > I currently have OR Fabs 1 ton steering set up and am going to
> > install Curries new tie rod and drag link assy. Curries new system
> > is identical to the stock geometry, however it uses
> 1.25x.25 chromoly
> > tubing on the rod and drag link with beefier hardware. Petersens did
> > a write upon it in this months issue.
> >
> > Replacing the tie rod, drag link and pitman arm are easy enough.
> > My problem is that I have to replace the knuckles(spindles) to get
> > back to the stock taper. Anyone willing to lend a hand with this
> > project? Anyone done this before?If so anything tricky to look out
> > for.
> >
> > Any help or comments greatly appreciated.
> >
> > John Butler
> >
> >
> >
> >
> > Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
> >
> >
>
>
>
>
> Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
>
>
30829 From: Scott Kruize <scottkruize@e...>
Date: Sun Sep 9, 2001 6:30am
Subject: RE: My TJ flat fender project
Joe,
Thanks. It's not as "unique" as yours but I like how the look ties in with the rear flares. This idea was patterned after the Currie Fire ant. I'd give Sharky credit for helping but by the time he showed up I had one side done and was bolting the flare on the second side. I'll still give Sharky a big thank you since he did bring some beer and we can't forget the guy who does that! I need to thank Jake Wagner for giving me a hand with this. He was there from the beginning and one of these days we'll have to chop his off.
Scott
-----Original Message-----
From: Joe W [mailto:arizonajeep@home.com]
Sent: Sunday, September 09, 2001 6:16 AM
To: 'Scott Kruize'; 'AZVJC'
Subject: RE: [az_vjc] My TJ flat fender project
Nice to see you joined the "flat" club...
So is your rig's new nickname "Daddy Flat Fenders" or maybe "Fire-Spider" or how about "Daddy Flat Spider"?
I like what you did much better than the stock setup... Good Job!
Joe West
-----Original Message-----
From: Scott Kruize [mailto:scottkruize@earthlink.net]
Sent: Sunday, September 09, 2001 12:09 AM
To: AZVJC
Subject: [az_vjc] My TJ flat fender project
Hello!
I have completed the major work on my flat fender. All I need to do now is install some amber lights in the grill and its complete.
Feel free to check out the following photo album of the project without the lights installed:
http://photos.yahoo.com/bc/osmtj/lst?.dir=/Flatfender&.view=t
Scott
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
30830 From: <davisrandy2@n...>
Date: Sun Sep 9, 2001 8:45am
Subject: RE: Axle Truss
hi jon
randy here,it is nice and strong a man down at
4wheelers showed it to me a little over a
year ago!!!!!
Randy
__________________________________________________ ________________
Your favorite stores, helpful shopping tools and great gift ideas. Experience the convenience of buying online with Shop@Netscape! http://shopnow.netscape.com/
Get your own FREE, personal Netscape Mail account today at http://webmail.netscape.com/
30831 From: <JNB4PLS@a...>
Date: Sun Sep 9, 2001 4:55am
Subject: Axle truss
Jon,
Do you know if extended shock mounts create any problems with clearance when
installing it. I was looking at this a few months ago as an inexpensive way
of beefing up the 35 and complementing the Super 35 I already have.
John Butler
30832 From: linda luik <minihummer@w...>
Date: Sun Sep 9, 2001 9:03am
Subject: Re: Ghost Town
I was planning a trip out to a "hog town" west of Kearney in the next
week or so. A hog town was one of those quickie towns that were built in
mining areas where prostitutes, preachers, and hot baths were available.
There is an active claim nearby whose mineshaft blows some pretty cool
air. The last time I was out there was in 1995 or 1996 during the
ASA4WDC FunFest in Kearney so I don't know what shape the place is in. I
know the trail to it isn't tough, but it's pretty scenic. You get to
drive over the top of a waterfall. The whole trip may take the better
part of a day.
Linda
azlarry_1@y... wrote:
>
> Does anyone have a good recomendation for a ghost town trip. My
> daughter turns 8 next week and wants to go see a ghost town. We have
> a 46 Willy's so we should be able to get to some neat places.
>
> Thanks,
>
> Larry Goin
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
30833 From: <mbailey345@y...>
Date: Sun Sep 9, 2001 10:34am
Subject: (FS) NP231j Transfer case
Ihave two NP231 for sale. One is complete, ready to bolt in, out of a
89 cherokee. The other one is out of a YJ Wrangler. It is all there
but needs to be put back together. $100 EA
30834 From: <mbailey345@y...>
Date: Sun Sep 9, 2001 10:37am
Subject: (FS) NP 231 Transfer case
I have two transfer cases for sale, one is out of a 89 cherokee,
complete ready to bolt in. The other is out of a YJ Wrangler, it is
all there, but needs to be put back together. $ 100 EA. If
interested, give me a call at 480-540-6502.
Mike
30835 From: Nick <nnote@a...>
Date: Sun Sep 9, 2001 11:00am
Subject: Yj Parts wanted. Tops, doors, etc.
I know some of you have had these up recently. A friends uncle here has bought a YJ and is looking for a set of Steel doors and also a bikini top and trunk top and other various sheltering items (someone had these up recently?)
If you have these email me back or call my friend at 602-770-5719
Nick
30836 From: AzVJC Website <azvjc@a...>
Date: Sun Sep 9, 2001 11:14am
Subject: [FS] F.S. 258 6 CYL
Price: $100.00
Contact: 623-879-3166
complete 150,000 mi. needs rebuild
30837 From: <az_vjc@yahoogroups.com>
Date: Sun Sep 9, 2001 11:20am
Subject: New file uploaded to az_vjc
Hello,
This email message is a notification to let you know that
a file has been uploaded to the Files area of the az_vjc
group.
File : /chris m's jeep stuff/tjflare.jpg
Uploaded by : cmandrick@h...
Description : Here is some fender trimming...
You can access this file at the URL
http://groups.yahoo.com/group/az_vjc/files/chris%20m%27s%20jeep%20stuff/tjflare.jpg
To learn more about file sharing for your group, please visit
http://help.yahoo.com/help/us/groups/files
Regards,
cmandrick@h...
30838 From: <cmandrick@h...>
Date: Sun Sep 9, 2001 11:28am
Subject: YJ full soft doors
Hey guys,
Does anyone have a pair of full soft doors from a late model CJ-7 or
a YJ? Even just the metal frames would be cool.
Chris M
87 YJ
30839 From: DesertJeep <joey@d...>
Date: Sun Sep 9, 2001 11:39am
Subject: RE: Help please!
Chris,
No worries. You will only have to accomadate the the remaining few after they go under one or two of the I17 bridges! :)
Joey K
-----Original Message-----
From: Chris Krieg [mailto:rv6a@mac.com]
Sent: Friday, September 07, 2001 11:22 PM
To: DougB; Arizona Virutal Jeep Club (AZ_VJC); Brad Kilgore
Subject: Re: [az_vjc] Help please!
Gee....um...Thanks Doug
Chris
From: "DougB"
Organization: @home
Date: Fri, 7 Sep 2001 17:30:03 -0700
To: "Arizona Virutal Jeep Club \(AZ_VJC\)" , "Brad Kilgore"
Subject: Re: [az_vjc] Help please!
Chis Krieg has indicated that they can all stay at his place. What a nice guy!
Doug
----- Original Message -----
From: Brad Kilgore
To: Arizona Virutal Jeep Club (AZ_VJC)
Sent: Friday, September 07, 2001 10:52 AM
Subject: [az_vjc] Help please!
Hi,
I have a small favor to ask. I have friends from Pakistan who are camping
their way around the States, Canada, and parts of Europe. They have asked
me if I know where they might be able to go without spending large amounts
of money. I said I would try my friends and family for accommodations.
They travel light and bring all their own camping gear, and only require a
small place to set up. I have given them your name and address anyway in
anticipation that you won't mind.
There's a picture at the end to help identification if they turn up. They may
bring the green Mercedes or the white one - sometimes they use both.
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service .
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
30840 From: AzVJC Website <jeep108@h...>
Date: Sun Sep 9, 2001 2:02pm
Subject: [FS] cj7 parts
Price: 350-300
Contact: jeep108@hotmail.com--(480)984-7147
81 cj7 tub in pretty good shape,right rocker panel is a little messed up.
t-4 tranny that bolts to dana 300
ken unterriner
30841 From: AzVJC Website <azvjc@a...>
Date: Sun Sep 9, 2001 2:42pm
Subject: [FS] outlaw 1's american racing & tow hitch with reciver.
Price: $250 (Rims) $85 (Hitch)
Contact: Jason Merrill
Well every one I STILL have these items and I have a new addition to the family on the way and need to sell them. give me a call 602-722-9391
Jason Merrill
30817 From: <bt88yj@a...>
Date: Sat Sep 8, 2001 5:48pm
Subject: Re: Ghost Town
Harqua Hala Observatory is west of town. One building and some foundations
left.
Some side trails with mine shafts and wood structures left.
Nice run goes from 1300 to 5400 feet.
If you do a search you can find info and directions to get there.
BT
--------------------------------------------------------------------------------
ADVERTISEMENT
30818 From: Eddie Nordstrom <Kilr650@a...>
Date: Sat Sep 8, 2001 10:06pm
Subject: MM/O2 sensor '94 Grand
My brother has a '94 G.C. Laredo with a 4.0L six. It needs motor mounts and probably x-case mount also. What's available aftermarket and hows the price campared to factory?
His "check engine" light is also on. Local shop here in Tucson said he needed an O2 sensor, $202.00 just for the part! Anyone been through this? Can we change it ourselves and if we do will the light go out or does it have to be reset somehow?
TIA
Eddie Nordstrom
30819 From: <azlarry_1@y...>
Date: Sat Sep 8, 2001 10:09pm
Subject: Ghost Town
Thanks for the suggestions everyone.
Larry
30820 From: AzVJC Website <azvjc@a...>
Date: Sat Sep 8, 2001 10:26pm
Subject: [FS] JEEP HARDTOP
Price: $265.00 OR BEST OFFER OR TRADES
Contact: WEEKDAYS 480-940-7263 WEEKENDS/EVENINGS 480-940-7263
ORIGINAL JEEP HARD TOP FOR EARLY WRANGLER (YJ) OR CJ7...GOOD PRICE....DARK PRIMER GREY IN COLOR..TOP IN
GOOD SHAPE...LIFT GATE IN GOOD SHAPE WITH MINOR PITTING (SOLID)
ALL WINDOW GLASS IN GOOD SHAPE...HARDWARE ALL THERE, NO KEY TO
LIFTGATE LOCK. READY TO PAINT.
ASKING $275.00 OR BEST OFFER...WILL CONSIDER TRADING THE
HARDTOP FOR ANY OF THE FOLLOWING:
*** FULL STEEL DOORS FOR MY YJ
*** LIFT KIT (NOT BODY LIFT or SHACKLE LIFT) FOR THE YJ
*** 15" WHEELS (5x4.5 for jeep) AND TIRES (32" or 33")
*** UPPER DOOR SLIDERS FOR STEEL YJ HALF DOORS...SPICE IN COLOR CANVAS OR
FIBERGLASS
Jerry Kryn
30821 From: AzVJC Website <azvjc@a...>
Date: Sat Sep 8, 2001 11:28pm
Subject: [FS] Looking for a good 3-4" complete lift for a 01' TJ
Price: ...
Contact: blainedepue@yahoo.com
I am hoping to find some one that has upgraded there lift to a bigger and better one and has a 3" one that I can take off there hands cheap! I cant afford to get a new one for awhile and I am hoping to find a used but good one! Blaine
Blaine DePue
30822 From: Scott Kruize <scottkruize@e...>
Date: Sun Sep 9, 2001 0:09am
Subject: My TJ flat fender project
Hello!
I have completed the major work on my flat fender. All I need to do now is install some amber lights in the grill and its complete.
Feel free to check out the following photo album of the project without the lights installed:
http://photos.yahoo.com/bc/osmtj/lst?.dir=/Flatfender&.view=t
Scott
30823 From: <cmandrick@h...>
Date: Sun Sep 9, 2001 1:14am
Subject: Re: My TJ flat fender project
Nice purple front D-ring! IMHO you can always cut off some more
metal. I have pics of a cool "chopped" TJ. I'll upload it after
this. The fenders on my POS have been removed for the obvious weight
reduction and lower drag coefficient. ;) I found some really cool
teardrop turn lamps from a vintage speed shop, but they are like 200
bucks... Glad to see the jeep went on a diet,
Chris M
87 YJ
"poopcruiser"
--- In az_vjc@y..., "Scott Kruize" <scottkruize@e...> wrote:
> Hello!
>
> I have completed the major work on my flat fender. All I need to do
now is
> install some amber lights in the grill and its complete.
>
> Feel free to check out the following photo album of the project
without the
> lights installed:
>
> http://photos.yahoo.com/bc/osmtj/lst?.dir=/Flatfender&.view=t
>
> Scott
30824 From: TRobertsRN <TRobertsRN@e...>
Date: Sun Sep 9, 2001 3:55am
Subject: Can't recieve mail
To all who may be attempting send me mail. I can send but not receive. Each time I try to send I get a box that looks like the way I used to sign on years ago. This pops up from time to time. It comes up when I am on line already and just keeps asking me for my login and password which does not work on it. So I can't check for messages. Hopefully it will go away by tomorrow. The box has a message that says "This way to the best of the Internet, type your username and password to connect to this site". It says it is from MSN and I have MSN but it does nothing.
Tom
30825 From: TRobertsRN <TRobertsRN@e...>
Date: Sun Sep 9, 2001 4:15am
Subject: mail working asking advice
Mail working correctly again. Anyone know how I can prevent this from happening or fix it when it does?
Tom
----- Original Message -----
From: TRobertsRN
To: Tish and Art ; thomas.g.roberts@att.net ; Tanya-Marie Seymour ; T Morris ; scorom@uswest.net ; Romig, Scott ; lonna ray ; Kevin Badgley ; Jeanine ; Gwen at work ; Gwen (new) home ; Dan Blair at work ; Betty Barnes Roberts ; 'Betty (new)' ; AzVJC_OT@yahoogroups.com ; az_vjc@yahoogroups.com ; AZ_FSJA@yahoogroups.com
Sent: Sunday, September 09, 2001 3:55 AM
Subject: [AZ_FSJA] Can't recieve mail
To all who may be attempting send me mail. I can send but not receive. Each time I try to send I get a box that looks like the way I used to sign on years ago. This pops up from time to time. It comes up when I am on line already and just keeps asking me for my login and password which does not work on it. So I can't check for messages. Hopefully it will go away by tomorrow. The box has a message that says "This way to the best of the Internet, type your username and password to connect to this site". It says it is from MSN and I have MSN but it does nothing.
Tom
[Non-text portions of this message have been removed]
To unsubscribe from this group, send an email to:
AZ_FSJA-unsubscribe@yahoogroups.com
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
30826 From: Jon Loveless <jonloveless@m...>
Date: Sun Sep 9, 2001 6:00am
Subject: Axle Truss
Take a look at the Superior Axle truss for the D35. Wow. I'm gonna get me one!
http://www.superioraxle.com/_borders/TRUSS_BACK.jpg
Jon Loveless
(480) 816-6240
30827 From: Joe W <arizonajeep@h...>
Date: Sun Sep 9, 2001 6:15am
Subject: RE: My TJ flat fender project
Nice to see you joined the "flat" club...
So is your rig's new nickname "Daddy Flat Fenders" or maybe "Fire-Spider" or how about "Daddy Flat Spider"?
I like what you did much better than the stock setup... Good Job!
Joe West
-----Original Message-----
From: Scott Kruize [mailto:scottkruize@earthlink.net]
Sent: Sunday, September 09, 2001 12:09 AM
To: AZVJC
Subject: [az_vjc] My TJ flat fender project
Hello!
I have completed the major work on my flat fender. All I need to do now is install some amber lights in the grill and its complete.
Feel free to check out the following photo album of the project without the lights installed:
http://photos.yahoo.com/bc/osmtj/lst?.dir=/Flatfender&.view=t
Scott
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
30828 From: Joe W <arizonajeep@h...>
Date: Sun Sep 9, 2001 6:17am
Subject: RE: Need help with spindles
Thanks for the advise Scott... I have a cheapie one as well...
John... Can you go to NAPA and pick up a good one?
Joe
> -----Original Message-----
> From: Scott Legge [mailto:scottlegge@h...]
> Sent: Friday, September 07, 2001 4:12 PM
> To: JNB4PLS@a...; AZVJC
> Subject: Re: [az_vjc] Need help with spindles
>
>
> Just a few words of advise from someone who has taken
> knuckles off before...
> GET A GOOD BALLJOINT SEPARATOR!!! or pickle fork whatever you
> call them.. I
> have a cheapy from autozone and it bent to scrap after the
> first balljoint.
> I grabbed a good steel one from my grandpa and it wasnt a
> problem! The deal
> is you arent just popping one off like steering it has the
> force of two
> joints holding. SO a better scenario would be get 2 and beat
> on the top then
> the bottom and it would keep the force there... Thats
> probably going to be
> your biggest snag hopefully... Best of luck.
>
>
> Scott Legge
>
>
>
> ----- Original Message -----
> From: <JNB4PLS@a...>
> To: <az_vjc@yahoogroups.com>
> Sent: Friday, September 07, 2001 2:48 PM
> Subject: [az_vjc] Need help with spindles
>
>
> > I currently have OR Fabs 1 ton steering set up and am going to
> > install Curries new tie rod and drag link assy. Curries new system
> > is identical to the stock geometry, however it uses
> 1.25x.25 chromoly
> > tubing on the rod and drag link with beefier hardware. Petersens did
> > a write upon it in this months issue.
> >
> > Replacing the tie rod, drag link and pitman arm are easy enough.
> > My problem is that I have to replace the knuckles(spindles) to get
> > back to the stock taper. Anyone willing to lend a hand with this
> > project? Anyone done this before?If so anything tricky to look out
> > for.
> >
> > Any help or comments greatly appreciated.
> >
> > John Butler
> >
> >
> >
> >
> > Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
> >
> >
>
>
>
>
> Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
>
>
30829 From: Scott Kruize <scottkruize@e...>
Date: Sun Sep 9, 2001 6:30am
Subject: RE: My TJ flat fender project
Joe,
Thanks. It's not as "unique" as yours but I like how the look ties in with the rear flares. This idea was patterned after the Currie Fire ant. I'd give Sharky credit for helping but by the time he showed up I had one side done and was bolting the flare on the second side. I'll still give Sharky a big thank you since he did bring some beer and we can't forget the guy who does that! I need to thank Jake Wagner for giving me a hand with this. He was there from the beginning and one of these days we'll have to chop his off.
Scott
-----Original Message-----
From: Joe W [mailto:arizonajeep@home.com]
Sent: Sunday, September 09, 2001 6:16 AM
To: 'Scott Kruize'; 'AZVJC'
Subject: RE: [az_vjc] My TJ flat fender project
Nice to see you joined the "flat" club...
So is your rig's new nickname "Daddy Flat Fenders" or maybe "Fire-Spider" or how about "Daddy Flat Spider"?
I like what you did much better than the stock setup... Good Job!
Joe West
-----Original Message-----
From: Scott Kruize [mailto:scottkruize@earthlink.net]
Sent: Sunday, September 09, 2001 12:09 AM
To: AZVJC
Subject: [az_vjc] My TJ flat fender project
Hello!
I have completed the major work on my flat fender. All I need to do now is install some amber lights in the grill and its complete.
Feel free to check out the following photo album of the project without the lights installed:
http://photos.yahoo.com/bc/osmtj/lst?.dir=/Flatfender&.view=t
Scott
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
30830 From: <davisrandy2@n...>
Date: Sun Sep 9, 2001 8:45am
Subject: RE: Axle Truss
hi jon
randy here,it is nice and strong a man down at
4wheelers showed it to me a little over a
year ago!!!!!
Randy
__________________________________________________ ________________
Your favorite stores, helpful shopping tools and great gift ideas. Experience the convenience of buying online with Shop@Netscape! http://shopnow.netscape.com/
Get your own FREE, personal Netscape Mail account today at http://webmail.netscape.com/
30831 From: <JNB4PLS@a...>
Date: Sun Sep 9, 2001 4:55am
Subject: Axle truss
Jon,
Do you know if extended shock mounts create any problems with clearance when
installing it. I was looking at this a few months ago as an inexpensive way
of beefing up the 35 and complementing the Super 35 I already have.
John Butler
30832 From: linda luik <minihummer@w...>
Date: Sun Sep 9, 2001 9:03am
Subject: Re: Ghost Town
I was planning a trip out to a "hog town" west of Kearney in the next
week or so. A hog town was one of those quickie towns that were built in
mining areas where prostitutes, preachers, and hot baths were available.
There is an active claim nearby whose mineshaft blows some pretty cool
air. The last time I was out there was in 1995 or 1996 during the
ASA4WDC FunFest in Kearney so I don't know what shape the place is in. I
know the trail to it isn't tough, but it's pretty scenic. You get to
drive over the top of a waterfall. The whole trip may take the better
part of a day.
Linda
azlarry_1@y... wrote:
>
> Does anyone have a good recomendation for a ghost town trip. My
> daughter turns 8 next week and wants to go see a ghost town. We have
> a 46 Willy's so we should be able to get to some neat places.
>
> Thanks,
>
> Larry Goin
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
30833 From: <mbailey345@y...>
Date: Sun Sep 9, 2001 10:34am
Subject: (FS) NP231j Transfer case
Ihave two NP231 for sale. One is complete, ready to bolt in, out of a
89 cherokee. The other one is out of a YJ Wrangler. It is all there
but needs to be put back together. $100 EA
30834 From: <mbailey345@y...>
Date: Sun Sep 9, 2001 10:37am
Subject: (FS) NP 231 Transfer case
I have two transfer cases for sale, one is out of a 89 cherokee,
complete ready to bolt in. The other is out of a YJ Wrangler, it is
all there, but needs to be put back together. $ 100 EA. If
interested, give me a call at 480-540-6502.
Mike
30835 From: Nick <nnote@a...>
Date: Sun Sep 9, 2001 11:00am
Subject: Yj Parts wanted. Tops, doors, etc.
I know some of you have had these up recently. A friends uncle here has bought a YJ and is looking for a set of Steel doors and also a bikini top and trunk top and other various sheltering items (someone had these up recently?)
If you have these email me back or call my friend at 602-770-5719
Nick
30836 From: AzVJC Website <azvjc@a...>
Date: Sun Sep 9, 2001 11:14am
Subject: [FS] F.S. 258 6 CYL
Price: $100.00
Contact: 623-879-3166
complete 150,000 mi. needs rebuild
30837 From: <az_vjc@yahoogroups.com>
Date: Sun Sep 9, 2001 11:20am
Subject: New file uploaded to az_vjc
Hello,
This email message is a notification to let you know that
a file has been uploaded to the Files area of the az_vjc
group.
File : /chris m's jeep stuff/tjflare.jpg
Uploaded by : cmandrick@h...
Description : Here is some fender trimming...
You can access this file at the URL
http://groups.yahoo.com/group/az_vjc/files/chris%20m%27s%20jeep%20stuff/tjflare.jpg
To learn more about file sharing for your group, please visit
http://help.yahoo.com/help/us/groups/files
Regards,
cmandrick@h...
30838 From: <cmandrick@h...>
Date: Sun Sep 9, 2001 11:28am
Subject: YJ full soft doors
Hey guys,
Does anyone have a pair of full soft doors from a late model CJ-7 or
a YJ? Even just the metal frames would be cool.
Chris M
87 YJ
30839 From: DesertJeep <joey@d...>
Date: Sun Sep 9, 2001 11:39am
Subject: RE: Help please!
Chris,
No worries. You will only have to accomadate the the remaining few after they go under one or two of the I17 bridges! :)
Joey K
-----Original Message-----
From: Chris Krieg [mailto:rv6a@mac.com]
Sent: Friday, September 07, 2001 11:22 PM
To: DougB; Arizona Virutal Jeep Club (AZ_VJC); Brad Kilgore
Subject: Re: [az_vjc] Help please!
Gee....um...Thanks Doug
Chris
From: "DougB"
Organization: @home
Date: Fri, 7 Sep 2001 17:30:03 -0700
To: "Arizona Virutal Jeep Club \(AZ_VJC\)" , "Brad Kilgore"
Subject: Re: [az_vjc] Help please!
Chis Krieg has indicated that they can all stay at his place. What a nice guy!
Doug
----- Original Message -----
From: Brad Kilgore
To: Arizona Virutal Jeep Club (AZ_VJC)
Sent: Friday, September 07, 2001 10:52 AM
Subject: [az_vjc] Help please!
Hi,
I have a small favor to ask. I have friends from Pakistan who are camping
their way around the States, Canada, and parts of Europe. They have asked
me if I know where they might be able to go without spending large amounts
of money. I said I would try my friends and family for accommodations.
They travel light and bring all their own camping gear, and only require a
small place to set up. I have given them your name and address anyway in
anticipation that you won't mind.
There's a picture at the end to help identification if they turn up. They may
bring the green Mercedes or the white one - sometimes they use both.
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service .
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
30840 From: AzVJC Website <jeep108@h...>
Date: Sun Sep 9, 2001 2:02pm
Subject: [FS] cj7 parts
Price: 350-300
Contact: jeep108@hotmail.com--(480)984-7147
81 cj7 tub in pretty good shape,right rocker panel is a little messed up.
t-4 tranny that bolts to dana 300
ken unterriner
30841 From: AzVJC Website <azvjc@a...>
Date: Sun Sep 9, 2001 2:42pm
Subject: [FS] outlaw 1's american racing & tow hitch with reciver.
Price: $250 (Rims) $85 (Hitch)
Contact: Jason Merrill
Well every one I STILL have these items and I have a new addition to the family on the way and need to sell them. give me a call 602-722-9391
Jason Merrill