blooddrive
01-03-2004, 08:05 PM
30542-30566
30542 From: Kevin Fell <kwfell@y...>
Date: Tue Sep 4, 2001 4:02pm
Subject: Completely off topic...looking for advice on a deadbeat tennant
Hi guys:
Please forgive the REALLY off topic post, but I have a duplex that I rent
1/2 and live in 1/2. Just curious if anyone out there has some rentals who
could offer me some advice on non-payment of rent issues. I won't take up
much of your time, but if you could call me at 602-841-3355 and spend a
couple of minutes with me, I would be greatly appreciative!
Thanks a bunch!
Kevin
'93 ZJ Limited with just one mod...
...EVERYTHING
__________________________________________________ _______
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com
--------------------------------------------------------------------------------
ADVERTISEMENT
30543 From: JEEP THANG <jeep_thang@h...>
Date: Tue Sep 4, 2001 4:24pm
Subject: Re: Member Sightings (Tucson)
Very Possible, I only saw the group for about a second as I was
driving by.
sincerely: JEEP THANG
--- In az_vjc@y..., "Brent Lizakowski" <brent_lizakowski@h...> wrote:
> Did the group of Jeeps look anything like this? :)
>
> http://66.1.40.244/jeep_stuff/martinezcanyonpics/the_group.jpg
>
> We were meeting up to head out to Martinez Canyon.
>
> Here are the rest of the pics from the run... Sorry for the lack of
> HTML!!!
>
> http://66.1.40.244/jeep_stuff/martinezcanyonpics/
>
> Brent
>
> --- In az_vjc@y..., "JEEP THANG" <jeep_thang@h...> wrote:
> > Sunday morning on our way to the Charouleau Gap run, I saw Leah
and
> > Jeff (Here is another wave) and my wife likes your Jeep. I also
saw
> a
> > Green TJ lifted lookied like 35's flatfendered, very Nice JEEP,
> here
> > is another wave for you, and last but not least I saw abunch of
> > Jeepers in a parking lot that were meeting Leah and Jeff, I know
> you
> > didn't see it but here is another wave to all of you "WAVE", I
was
> in
> > the Red YJ with the big stripes and no flares.
> >
> > Sincerely: JEEP THANG
> > Larry Carmen and Emily
30544 From: Nick <nnote@a...>
Date: Tue Sep 4, 2001 4:34pm
Subject: Re: Gas Tank Question again
Ya, the optional 19 gallon tank was what?, 300 dollars more???? It takes about 40 minutes to pull that hose out and you save 300 bucks....and you get about 5 more gallons of space...
Nick
----- Original Message -----
From: David R. W. Withers
To: az_vjc@yahoogroups.com
Sent: Tuesday, September 04, 2001 3:59 PM
Subject: [az_vjc] Gas Tank Question again
This site says that there was an optional tank
http://www.media.chrysler.com/wwwprkt/2452.htm#fuel
_____________
David R. W. Withers
Network Engineer/ Senior QA Engineer
È 480-215-6992
' 480-551-4667
* dwithers@atstraffic.com
_____________
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
30545 From: <dkober@g...>
Date: Tue Sep 4, 2001 4:48pm
Subject: Gas Tank Question
Thought I'd throw some more fuel on the fire, so to speak.
I ran my 99 TJ 15 gal. tank to fumes today, filled with 16.313
gallons.
Here's a different procedure on the TJ gas tank enlargemnet.
Has anyone tried any of these mods on a TJ?
http://www.jedi.com/obiwan/jeep/15to20gal.html
30546 From: <cmandrick@h...>
Date: Tue Sep 4, 2001 4:48pm
Subject: Jeep has new paint!!!
Check it out, I painted my Jeep! Look under my photo gallery on the
website. I am proud of the custom painted towhooks as well!
Chris M
87 YJ
30547 From: linda luik <minihummer@w...>
Date: Tue Sep 4, 2001 4:49pm
Subject: Member Sighting (Mesa/Tempe)
Hey RickN!
I didn't realize it was you until way after you made the turn going
north on Price Rd.
LindaL
Blue ZJ
30548 From: Leah & Geoff <leahlsq@q...>
Date: Tue Sep 4, 2001 4:22pm
Subject: Re: Re: Member Sightings (Tucson)
We saw your first wave! Nice YJ ya got there.
We were a bit concerned about the CJ5 in front
of you with a slight twist in the rear spring hanger.
How many did the Gap with you?
We saw the headlights of a group coming over
the saddle (through the gap) it was what? About 7:30?
Was that your group?
Leah
-----Original Message-----
From: JEEP THANG <jeep_thang@h...>
To: az_vjc@yahoogroups.com <az_vjc@yahoogroups.com>
Date: Tuesday, September 04, 2001 5:36 PM
Subject: [az_vjc] Re: Member Sightings (Tucson)
>Very Possible, I only saw the group for about a second as I was
>driving by.
>
>sincerely: JEEP THANG
>
>--- In az_vjc@y..., "Brent Lizakowski" <brent_lizakowski@h...> wrote:
>> Did the group of Jeeps look anything like this? :)
>>
>> http://66.1.40.244/jeep_stuff/martinezcanyonpics/the_group.jpg
>>
>> We were meeting up to head out to Martinez Canyon.
>>
>> Here are the rest of the pics from the run... Sorry for the lack of
>> HTML!!!
>>
>> http://66.1.40.244/jeep_stuff/martinezcanyonpics/
>>
>> Brent
>>
>> --- In az_vjc@y..., "JEEP THANG" <jeep_thang@h...> wrote:
>> > Sunday morning on our way to the Charouleau Gap run, I saw Leah
>and
>> > Jeff (Here is another wave) and my wife likes your Jeep. I also
>saw
>> a
>> > Green TJ lifted lookied like 35's flatfendered, very Nice JEEP,
>> here
>> > is another wave for you, and last but not least I saw abunch of
>> > Jeepers in a parking lot that were meeting Leah and Jeff, I know
>> you
>> > didn't see it but here is another wave to all of you "WAVE", I
>was
>> in
>> > the Red YJ with the big stripes and no flares.
>> >
>> > Sincerely: JEEP THANG
>> > Larry Carmen and Emily
>
>
>
>
>Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
30549 From: Roxie <Roxie@t...>
Date: Tue Sep 4, 2001 5:43pm
Subject: Fun and Sun and Dunes....
Anyone up for a trip to Pismo Beach for some Dunes?
There's a Beach Cleanup on the 15th of Sept - and I thought it would be
nice to get wheelers out there. I was wondering if anyone from the AZ
side would be interested? I've got someone from as far as Vegas!
I know, last minute, but if you're interested, email me and we'll chat...
-ROXIE
30550 From: AzVJC Website <azvjc@a...>
Date: Tue Sep 4, 2001 5:26pm
Subject: [FS] JEEP HARDTOP
Price: $275.00 OR BEST OFFER..WILL CONSIDER TRADES......
Contact: EVENINGS-480-940-7263 DAYS-48--797-4112(cell phone)
HARD TOP FOR WRANGLER (YJ) OR CJ7...GOOD PRICE....DARK PRIMER GREY IN COLOR..TOP IN
GOOD SHAPE...LIFT GATE IN GOOD SHAPE WITH MINOR RUST (SOLID)
ALL WINDOW GLASS IN GOOD SHAPE...HARDWARE ALL THERE, NO KEY TO
LIFTGATE LOCK. READY TO PAINT.
ASKING $275.00 OR BEST OFFER...WILL CONSIDER TRADING THE
HARDTOP FOR ANY OF THE FOLLOWING:
*** FULL STEEL DOORS FOR MY YJ
*** LIFT KIT (NOT BODY LIFT or SHACKLE LIFT) FOR THE YJ
*** 15" WHEELS (5x4.5 for jeep) AND TIRES (32" or 33")
*** UPPER DOOR SLIDERS FOR STEEL YJ HALF DOORS...SPICE IN COLOR CANVAS OR
FIBERGLASS
Jerry Kryn
30551 From: Nick <nnote@a...>
Date: Tue Sep 4, 2001 5:48pm
Subject: Re: Gas Tank Question
Ya, that procedure is alot of work. You can do it through the gas cap area
in around 40 minutes or less and without emptying your tank. Here is that
technic.
http://www.outdoorwire.com/4x4/jeep/tech/fuel/
Also while your there pull one spring out of your liscense plate flap. Mine
used to push the gas pump out of the filler hole but now it's to weak to do
that with the missing spring.
Nick
----- Original Message -----
From: <dkober@g...>
To: <az_vjc@yahoogroups.com>
Sent: Tuesday, September 04, 2001 4:48 PM
Subject: [az_vjc] Gas Tank Question
> Thought I'd throw some more fuel on the fire, so to speak.
> I ran my 99 TJ 15 gal. tank to fumes today, filled with 16.313
> gallons.
>
> Here's a different procedure on the TJ gas tank enlargemnet.
>
> Has anyone tried any of these mods on a TJ?
>
> http://www.jedi.com/obiwan/jeep/15to20gal.html
>
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
30552 From: Scott Maiden <bermboy@h...>
Date: Tue Sep 4, 2001 5:55pm
Subject: Re: SYE Snap Ring Pliers
--------------------------------------------------------------------------------
Get your FREE download of MSN Explorer at http://explorer.msn.com
30553 From: DougB <azjeep@h...>
Date: Tue Sep 4, 2001 6:01pm
Subject: Re: Gas Tank Question again
It's actually the exact same tank, but the 19 gallon version has some internal mods to give it the increased capacity. I've heard of those that have taken the smaller capacity tank and altered it to hold the 19 gallons. Why Jeep bothers with 2 sizes is beyond me, though.
Doug
----- Original Message -----
From: David R. W. Withers
To: az_vjc@yahoogroups.com
Sent: Tuesday, September 04, 2001 3:59 PM
Subject: [az_vjc] Gas Tank Question again
This site says that there was an optional tank
http://www.media.chrysler.com/wwwprkt/2452.htm#fuel
_____________
David R. W. Withers
Network Engineer/ Senior QA Engineer
È 480-215-6992
' 480-551-4667
* dwithers@atstraffic.com
_____________
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
30554 From: DougB <azjeep@h...>
Date: Tue Sep 4, 2001 6:03pm
Subject: Re: Jeep has new paint!!!
No longer turd brown??...say it ain't so....<bg>
Doug
----- Original Message -----
From: <cmandrick@h...>
To: <az_vjc@yahoogroups.com>
Sent: Tuesday, September 04, 2001 4:48 PM
Subject: [az_vjc] Jeep has new paint!!!
> Check it out, I painted my Jeep! Look under my photo gallery on the
> website. I am proud of the custom painted towhooks as well!
>
> Chris M
> 87 YJ
>
>
>
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
30555 From: DougB <azjeep@h...>
Date: Tue Sep 4, 2001 6:22pm
Subject: Re: Jeep has new paint!!!
BTW - how many rattle cans it take?? <jk>
Actually - looks pretty good. BUT - you need new stickers!!
You must have just done it, since I thought I saw your YJ at Chili's (Flag)
on Monday.
Doug
----- Original Message -----
From: "DougB" <azjeep@h...>
To: <az_vjc@yahoogroups.com>; <cmandrick@h...>
Sent: Tuesday, September 04, 2001 6:03 PM
Subject: Re: [az_vjc] Jeep has new paint!!!
> No longer turd brown??...say it ain't so....<bg>
>
> Doug
>
> ----- Original Message -----
> From: <cmandrick@h...>
> To: <az_vjc@yahoogroups.com>
> Sent: Tuesday, September 04, 2001 4:48 PM
> Subject: [az_vjc] Jeep has new paint!!!
>
>
> > Check it out, I painted my Jeep! Look under my photo gallery on the
> > website. I am proud of the custom painted towhooks as well!
> >
> > Chris M
> > 87 YJ
> >
> >
> >
> >
> >
> >
> > Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
> >
> >
>
30556 From: James Towle <James.Towle@a...>
Date: Tue Sep 4, 2001 6:18pm
Subject: Re: Gas Tank Question
Last time I pulled my tank I was trying do adjust the float but
couldn't get the pump assy to unscrew from the tank.
I would love to try this when I install my new Kilby skid plate.
--James
--- In az_vjc@y..., dkober@g... wrote:
> Thought I'd throw some more fuel on the fire, so to speak.
> I ran my 99 TJ 15 gal. tank to fumes today, filled with 16.313
> gallons.
>
> Here's a different procedure on the TJ gas tank enlargemnet.
>
> Has anyone tried any of these mods on a TJ?
>
> http://www.jedi.com/obiwan/jeep/15to20gal.html
30557 From: Scott Maiden <bermboy@h...>
Date: Tue Sep 4, 2001 6:39pm
Subject: Re: SYE Snap Ring Pliers
Well Bill lives the closest so I will borrow his pliers but thanks for all the offers. This club is great!! Ok, Let me know when I can come borrow them and exactly where you live I am on Dobson & Elliot and will probably start on thurs or friday. Thanks alot.
Scott "Iron" Maiden
01 GSX-R 750....o~`o
http://www.scottmaiden.gixxer.com
bermboy@hotmail.com
>From: Bill Aylesworth
>To: James Junkin , az_vjc@yahoogroups.com, Scott Maiden
>Subject: Re: [az_vjc] SYE Snap Ring Pliers
>Date: Tue, 4 Sep 2001 14:53:01 -0700 (PDT)
>
>Hey Scott,
>I have a pair you can use. I live in the Chandler
>area. (Elliot and 101) I have the big Snap on ones
>with the serrated jaws and the drilled detent. They
>are the only tool for the job!
>
>Bill A.
>M38A1
>
>Hate to say it, but sometimes a hammer just won't
>work.
>
>
>--- James Junkin wrote:
> > The kind you want for the external rings have
> > serrated "Jaws" which will actually hold the ring
> > open while you remove it from the shaft. Try
> > Snap-On or maybe Sears.
> > DO NOT EVEN attempt to remove the rings with a
> > cheapo pair with pins, etc. It'll take you all day.
> > James Junkin
> > O|||||||O
> > '81 SJ Cherokee "Midnight"
> > '97 TJ "Tar Baby"
> > '98 TJ "Crimson Ride"
> > ----- Original Message -----
> > From: Scott Maiden
> > To: az_vjc@yahoogroups.com
> > Sent: Tuesday, September 04, 2001 2:34 PM
> > Subject: [az_vjc] SYE Snap Ring Pliers
> >
> >
> > Where are you guys getting the big snap ring
> > pliers I have heard about for pueeing in a sye It is
> > a JB conversions btw.
> >
> >
> >
> >
> >
> >
> > Scott "Iron" Maiden
> > 01 GSX-R 750....o~`o
> > http://www.scottmaiden.gixxer.com
> > bermboy@hotmail.com
> > >From: "Roger Tomas"
> > >To: Scott Maiden
> > >Subject: Re: [az_vjc] Shops and Springovers
> > >Date: Mon, 13 Aug 2001 09:30:39 -0700
> > >
> > >Scott,
> > >
> > >You need to research spring-overs and decide
> > exactly how you want yours done.
> > >There are a number of ways to do it - some ways
> > are much more expensive than
> > >others. For example, I once talked to the
> > fabricator at 4Wheelers Supply about
> > >a spring-over and he mentioned "4-link this or
> > that" and the price was to be
> > >about
> > >$3000. Of course, a 4-link set-up is very
> > elaborate but it isn't necessary.
> > >But,
> > >there is a minimal way to do a spring-over and
> > there are various degrees of
> > >added
> > >complexity. (For example, steering geometry can
> > be address with drop pitman
> > >arms.,
> > >funny shaped drag links, etc. or you could go
> > with high-clearance steering).
> > >
> > >In the end, you'll be better able to compare
> > shops if you decide exactly what
> > >you
> > >want and then have the shops quote you prices for
> > what you want and not for what
> > >
> > >they would give you if you didn't state exactly
> > what you want.
> > >
> > >BTW, Macromotive is strictly a mail order
> > retailer and they don't do service.
> > >However,
> > >they are affiliated with Offroad Unlimited which
> > does provide service. I don't
> > >know
> > >if they do fabrication type service, though.
> > >
> > >-Roger
> > >
> > >Scott Maiden wrote:
> > >
> > > >
> > > >
> > > > Hey All,
> > > >
> > > > I know I know, real jeeps are built not bought
> > but I don't feel comfortable
> > > > doing a springover myself, being new to the 4
> > by world where whould be the
> > > > best place be to go have my 93 YJ sprung over?
> > 4Wheelers Supply? OR-Fab?
> > > > Hunter Offroad? Macromotive? Any I am missing?
> > tia and btw what is hunters web
> > > > site?
> > > >
> > > >
> > > > Scott "Iron" Maiden
> > > >
> > > > 93 Green YJ
> > > >
> > > > 01 GSX-R 750....o~`o
> > > >
> > > >
> > > >
> >
>-------------------------------------------------------------------------------
> >
> > > > Get your FREE download of MSN Explorer at
> > http://explorer.msn.com
> > > >
> > > > Your use of Yahoo! Groups is subject to the
> > Yahoo! Terms of Service.
> > >
> >
> >
> >
>------------------------------------------------------------------------------
> > Get your FREE download of MSN Explorer at
> > http://explorer.msn.com
> >
> > Your use of Yahoo! Groups is subject to the Yahoo!
> > Terms of Service.
> >
> >
>
>
>__________________________________________________
>Do You Yahoo!?
>Get email alerts & NEW webcam video instant messaging with Yahoo! Messenger
>http://im.yahoo.com
--------------------------------------------------------------------------------
Get your FREE download of MSN Explorer at http://explorer.msn.com
30558 From: Daddy Longlegs <scottkruize@e...>
Date: Tue Sep 4, 2001 8:10pm
Subject: RE: TeraLo
Tom,
What is the first gear ratio on your auto? 3.06 is a fairly steep ratio for
an auto. If we give your auto the benefit of the doubt and we use that
number your actual crawl ratio in first gear might be 56:1. Yes the auto
seems to multiply that figure but the REAL ratio is still 56:1.
Jon has a 5 speed so his ratio would actually be higher than
yours(3.86*4*4.56)= 70.4:1. But once again the torque converter seems to
raise the felt ratio compared to his.
Correct me if I'm missing something here. This is all friendly in nature :)
Anybody have any input as to how much the auto affects this? I'm curious.
Please back up your responses if you can.
Regards,
Scott
-----Original Message-----
From: tom le [mailto:tomle_85024@y...]
Sent: Tuesday, September 04, 2001 9:49 AM
To: Jon Loveless; az_vjc@yahoogroups.com
Subject: Re: [az_vjc] TeraLo
Jon,
That's an excellent decision to go to 4.56s. This is
the current setup on ZJ w/ about 100:1 CR (106" wb,
36" SSR, 4.56s, and auto transmission). I've
experienced the same thing on the whine noise at
higher revs on mine and according to Teraflex where I
purchased the Teralow4:1, it is normal. Are you going
to install the new gears & Teralow all by yourself?
Tom
--- Jon Loveless <jonloveless@m...> wrote:
> It is normal. It is chain driven and with the low
> gears you tend to get a
> serious whine at higher revs in anything but 1st.
> TeraFlex also cautions
> against running your Jeep in higher gears in 4low
> for very long due to the
> excessive speed. It sounds bad enough so that isn't
> a problem. I just found
> that I have a real gap between 1st Hi and 1st Lo.
> With 3.73 gearing and
> 35's I am geared too high for slow trails in 1st Lo
> and too low for 1st Lo
> much of the time. I am going to 4.56 this week to
> give myself a better 1st
> Hi ratio (and of course - much better true crawl).
>
> Jon
>
>
> At 04:21 AM 9/4/2001 +0000, you wrote:
> >But finally got in and the jeep moving. Works
> good, but lots of
> >noise in 2nd and up in 4LO; I've heard that is
> normal though.
> >
> >
> >
> >
>
>
> Jon Loveless
> (480) 816-6240
>
>
>
>
> Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
>
>
__________________________________________________
Do You Yahoo!?
Get email alerts & NEW webcam video instant messaging with Yahoo! Messenger
http://im.yahoo.com
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
30559 From: Daryl Faust <louddog71@y...>
Date: Tue Sep 4, 2001 8:38pm
Subject: Emissions test
I have a 86 CJ7, stock configuration, due for
emissions test this month. Anyone have any advice to
help me pass?
__________________________________________________
Do You Yahoo!?
Get email alerts & NEW webcam video instant messaging with Yahoo! Messenger
http://im.yahoo.com
30560 From: <jeepin_in_az@y...>
Date: Tue Sep 4, 2001 9:00pm
Subject: Re: Emissions test
I had an 88 YJ, and it always passed with no problems, and the engine
was stock. Have you had problems before?
Mike
--- In az_vjc@y..., Daryl Faust <louddog71@y...> wrote:
> I have a 86 CJ7, stock configuration, due for
> emissions test this month. Anyone have any advice to
> help me pass?
>
>
>
> __________________________________________________
> Do You Yahoo!?
> Get email alerts & NEW webcam video instant messaging with Yahoo!
Messenger
> http://im.yahoo.com
30561 From: Mike Baney <jeepin_in_az@y...>
Date: Tue Sep 4, 2001 9:07pm
Subject: ju: free skid plate
http://forums.jeepsunlimited.com/ubb/Forum4/HTML/009597.html
A couple of people have posted looking for a stock skid plate, here is one
free + shipping
Mike
__________________________________________________
Do You Yahoo!?
Get email alerts & NEW webcam video instant messaging with Yahoo! Messenger
http://im.yahoo.com
30562 From: Stu Olson <solson8@q...>
Date: Tue Sep 4, 2001 9:47pm
Subject: RE: Contacted Teraflex Re: 231 Shift Fork Mod.
Dan,
Several years ago, when I bought my first lift, a Tera 2" coil kit, I found
that the directions for it where terrible!
I called Tera about it (after the lift was installed) and told them how bad
they were. Their response was that the lift was intended to be primarily
marketed to dealerships for in-house installation. As such, the dealership
mechanics did not require much in the way of instructions.
I explained to them that since the kit was sold at retail, they owed their
customers a good set of directions to follow. In about 4 months, I received
a copy of the new instructions (much was taken from my web site install
write-up).
So, they did come through with it and even remembered to send me a copy via
snail mail.
Stu
Stu Olson
www.stu-offroad.com
-----Original Message-----
From: Dan Coley [mailto:mt_b@y...]
Sent: Tuesday, September 04, 2001 2:57 PM
To: az_vjc@yahoogroups.com
Subject: [az_vjc] Contacted Teraflex Re: 231 Shift Fork Mod.
Called up and spoke to Brandon that is in charge of the Teralow
dept. I told him the addendum that was added to the Teralow
instructions wasn't entirely accurate nor extremely beneficial. He
said he knows that alot of the 231 t-cases have had to have the shift
fork shortened, but was not aware that the instructions only called
out for the 2001 models and did not explain exactly what needs to be
done. He said he would work on rewriting the addendum to include all
models, as well as explain in more detail exactly what has to be done
in order to obtain correct shifting.
For me it was pretty obvious as to what had to be done, however I
don't think that when your working on something as important as a
transfer case, you shouldn't have to guess at what the instructions
are implying.
Chances are I won't know if any changes are made, until I go to put a
Teralow in Tara's jeep, but if he does get it done, then that would
represent great customer service; and maybe some other people won't
have to go through the same hassle and jeep down-time I did.
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
30563 From: James Towle <James.Towle@a...>
Date: Tue Sep 4, 2001 9:56pm
Subject: Contacted Teraflex Re: 231 Shift Fork Mod.
> In about 4 months, I received a copy of the new
> instructions (much was taken from my web site install
> write-up).
........
> Stu
>
> Stu Olson
> www.stu-offroad.com
They know good writing when they see it. Why mess with perfection? ;)
--James
30564 From: AzVJC Website <jraya@a...>
Date: Tue Sep 4, 2001 10:10pm
Subject: [FS] 2001 OFFROAD/SAND BUGGY
Price: $24,000.00
Contact: BRENT @ McKee Motorsports (520)-292-2653
2001 4 Seater Buggy, 2332 VW Engine, 930 CV's, Fox Shocks
Coil Over, Beard Seats, Diest 5 pt. Hanesses, 18" Travel
Front &; Rear, New Tranny, MSD Ignition, Power Steering,
Fodril Arms, Wright Jumbo Spindles, Disc Brakes Front
&; Rear, Close to street Legal, Too much to list. If you
know anyone who might be interested please pass this
along.
Please call Brent @ 520-292-2653
Mike Raya
30565 From: David O'Boyle <davidoboyle@h...>
Date: Tue Sep 4, 2001 10:35pm
Subject: Gila Monster/sunday
Had a blast guys, Thanks for comming out to see my side of the globe...
Stay tuned there is more to come from the West side.......
Scott, the map looks great. Call me when your ready to head out again.
Joey, is it ok to use the link to your shots for the writeup???
Later
Dave
623-327-1486
__________________________________________________ _______________
Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp
30566 From: David O'Boyle <davidoboyle@h...>
Date: Tue Sep 4, 2001 11:02pm
Subject: Slave Cylinder WOAHHSS!!!! revisited again :(
Well Gang,
Yet another Slave cylinder bites the dust.. 4th one in 3 years..
The most recent on was changed with all MOPAR parts.
clutch, pressure plate, fluid, slave cylinder.
Anyone devise a modification to eliminate the hydrolic slave cylinder and
convert to a regular old throwout bering??? I'd be really interested in this
type of setup if any of you FAB guys have devised such a creation.. The AX15
is a good tranny but the slave cylinders SUCK!!!
I have tried every brand and frankly I am sick of tearing out my tranny to
replace this repeatedly faulty part. So if you or anyone you know has
modifyed or is in the process of modifying/eliminating this part please
contact me..
Thanks a bunch
Dave
623-327-1486
__________________________________________________ _______________
Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp
30542 From: Kevin Fell <kwfell@y...>
Date: Tue Sep 4, 2001 4:02pm
Subject: Completely off topic...looking for advice on a deadbeat tennant
Hi guys:
Please forgive the REALLY off topic post, but I have a duplex that I rent
1/2 and live in 1/2. Just curious if anyone out there has some rentals who
could offer me some advice on non-payment of rent issues. I won't take up
much of your time, but if you could call me at 602-841-3355 and spend a
couple of minutes with me, I would be greatly appreciative!
Thanks a bunch!
Kevin
'93 ZJ Limited with just one mod...
...EVERYTHING
__________________________________________________ _______
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com
--------------------------------------------------------------------------------
ADVERTISEMENT
30543 From: JEEP THANG <jeep_thang@h...>
Date: Tue Sep 4, 2001 4:24pm
Subject: Re: Member Sightings (Tucson)
Very Possible, I only saw the group for about a second as I was
driving by.
sincerely: JEEP THANG
--- In az_vjc@y..., "Brent Lizakowski" <brent_lizakowski@h...> wrote:
> Did the group of Jeeps look anything like this? :)
>
> http://66.1.40.244/jeep_stuff/martinezcanyonpics/the_group.jpg
>
> We were meeting up to head out to Martinez Canyon.
>
> Here are the rest of the pics from the run... Sorry for the lack of
> HTML!!!
>
> http://66.1.40.244/jeep_stuff/martinezcanyonpics/
>
> Brent
>
> --- In az_vjc@y..., "JEEP THANG" <jeep_thang@h...> wrote:
> > Sunday morning on our way to the Charouleau Gap run, I saw Leah
and
> > Jeff (Here is another wave) and my wife likes your Jeep. I also
saw
> a
> > Green TJ lifted lookied like 35's flatfendered, very Nice JEEP,
> here
> > is another wave for you, and last but not least I saw abunch of
> > Jeepers in a parking lot that were meeting Leah and Jeff, I know
> you
> > didn't see it but here is another wave to all of you "WAVE", I
was
> in
> > the Red YJ with the big stripes and no flares.
> >
> > Sincerely: JEEP THANG
> > Larry Carmen and Emily
30544 From: Nick <nnote@a...>
Date: Tue Sep 4, 2001 4:34pm
Subject: Re: Gas Tank Question again
Ya, the optional 19 gallon tank was what?, 300 dollars more???? It takes about 40 minutes to pull that hose out and you save 300 bucks....and you get about 5 more gallons of space...
Nick
----- Original Message -----
From: David R. W. Withers
To: az_vjc@yahoogroups.com
Sent: Tuesday, September 04, 2001 3:59 PM
Subject: [az_vjc] Gas Tank Question again
This site says that there was an optional tank
http://www.media.chrysler.com/wwwprkt/2452.htm#fuel
_____________
David R. W. Withers
Network Engineer/ Senior QA Engineer
È 480-215-6992
' 480-551-4667
* dwithers@atstraffic.com
_____________
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
30545 From: <dkober@g...>
Date: Tue Sep 4, 2001 4:48pm
Subject: Gas Tank Question
Thought I'd throw some more fuel on the fire, so to speak.
I ran my 99 TJ 15 gal. tank to fumes today, filled with 16.313
gallons.
Here's a different procedure on the TJ gas tank enlargemnet.
Has anyone tried any of these mods on a TJ?
http://www.jedi.com/obiwan/jeep/15to20gal.html
30546 From: <cmandrick@h...>
Date: Tue Sep 4, 2001 4:48pm
Subject: Jeep has new paint!!!
Check it out, I painted my Jeep! Look under my photo gallery on the
website. I am proud of the custom painted towhooks as well!
Chris M
87 YJ
30547 From: linda luik <minihummer@w...>
Date: Tue Sep 4, 2001 4:49pm
Subject: Member Sighting (Mesa/Tempe)
Hey RickN!
I didn't realize it was you until way after you made the turn going
north on Price Rd.
LindaL
Blue ZJ
30548 From: Leah & Geoff <leahlsq@q...>
Date: Tue Sep 4, 2001 4:22pm
Subject: Re: Re: Member Sightings (Tucson)
We saw your first wave! Nice YJ ya got there.
We were a bit concerned about the CJ5 in front
of you with a slight twist in the rear spring hanger.
How many did the Gap with you?
We saw the headlights of a group coming over
the saddle (through the gap) it was what? About 7:30?
Was that your group?
Leah
-----Original Message-----
From: JEEP THANG <jeep_thang@h...>
To: az_vjc@yahoogroups.com <az_vjc@yahoogroups.com>
Date: Tuesday, September 04, 2001 5:36 PM
Subject: [az_vjc] Re: Member Sightings (Tucson)
>Very Possible, I only saw the group for about a second as I was
>driving by.
>
>sincerely: JEEP THANG
>
>--- In az_vjc@y..., "Brent Lizakowski" <brent_lizakowski@h...> wrote:
>> Did the group of Jeeps look anything like this? :)
>>
>> http://66.1.40.244/jeep_stuff/martinezcanyonpics/the_group.jpg
>>
>> We were meeting up to head out to Martinez Canyon.
>>
>> Here are the rest of the pics from the run... Sorry for the lack of
>> HTML!!!
>>
>> http://66.1.40.244/jeep_stuff/martinezcanyonpics/
>>
>> Brent
>>
>> --- In az_vjc@y..., "JEEP THANG" <jeep_thang@h...> wrote:
>> > Sunday morning on our way to the Charouleau Gap run, I saw Leah
>and
>> > Jeff (Here is another wave) and my wife likes your Jeep. I also
>saw
>> a
>> > Green TJ lifted lookied like 35's flatfendered, very Nice JEEP,
>> here
>> > is another wave for you, and last but not least I saw abunch of
>> > Jeepers in a parking lot that were meeting Leah and Jeff, I know
>> you
>> > didn't see it but here is another wave to all of you "WAVE", I
>was
>> in
>> > the Red YJ with the big stripes and no flares.
>> >
>> > Sincerely: JEEP THANG
>> > Larry Carmen and Emily
>
>
>
>
>Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
30549 From: Roxie <Roxie@t...>
Date: Tue Sep 4, 2001 5:43pm
Subject: Fun and Sun and Dunes....
Anyone up for a trip to Pismo Beach for some Dunes?
There's a Beach Cleanup on the 15th of Sept - and I thought it would be
nice to get wheelers out there. I was wondering if anyone from the AZ
side would be interested? I've got someone from as far as Vegas!
I know, last minute, but if you're interested, email me and we'll chat...
-ROXIE
30550 From: AzVJC Website <azvjc@a...>
Date: Tue Sep 4, 2001 5:26pm
Subject: [FS] JEEP HARDTOP
Price: $275.00 OR BEST OFFER..WILL CONSIDER TRADES......
Contact: EVENINGS-480-940-7263 DAYS-48--797-4112(cell phone)
HARD TOP FOR WRANGLER (YJ) OR CJ7...GOOD PRICE....DARK PRIMER GREY IN COLOR..TOP IN
GOOD SHAPE...LIFT GATE IN GOOD SHAPE WITH MINOR RUST (SOLID)
ALL WINDOW GLASS IN GOOD SHAPE...HARDWARE ALL THERE, NO KEY TO
LIFTGATE LOCK. READY TO PAINT.
ASKING $275.00 OR BEST OFFER...WILL CONSIDER TRADING THE
HARDTOP FOR ANY OF THE FOLLOWING:
*** FULL STEEL DOORS FOR MY YJ
*** LIFT KIT (NOT BODY LIFT or SHACKLE LIFT) FOR THE YJ
*** 15" WHEELS (5x4.5 for jeep) AND TIRES (32" or 33")
*** UPPER DOOR SLIDERS FOR STEEL YJ HALF DOORS...SPICE IN COLOR CANVAS OR
FIBERGLASS
Jerry Kryn
30551 From: Nick <nnote@a...>
Date: Tue Sep 4, 2001 5:48pm
Subject: Re: Gas Tank Question
Ya, that procedure is alot of work. You can do it through the gas cap area
in around 40 minutes or less and without emptying your tank. Here is that
technic.
http://www.outdoorwire.com/4x4/jeep/tech/fuel/
Also while your there pull one spring out of your liscense plate flap. Mine
used to push the gas pump out of the filler hole but now it's to weak to do
that with the missing spring.
Nick
----- Original Message -----
From: <dkober@g...>
To: <az_vjc@yahoogroups.com>
Sent: Tuesday, September 04, 2001 4:48 PM
Subject: [az_vjc] Gas Tank Question
> Thought I'd throw some more fuel on the fire, so to speak.
> I ran my 99 TJ 15 gal. tank to fumes today, filled with 16.313
> gallons.
>
> Here's a different procedure on the TJ gas tank enlargemnet.
>
> Has anyone tried any of these mods on a TJ?
>
> http://www.jedi.com/obiwan/jeep/15to20gal.html
>
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
30552 From: Scott Maiden <bermboy@h...>
Date: Tue Sep 4, 2001 5:55pm
Subject: Re: SYE Snap Ring Pliers
--------------------------------------------------------------------------------
Get your FREE download of MSN Explorer at http://explorer.msn.com
30553 From: DougB <azjeep@h...>
Date: Tue Sep 4, 2001 6:01pm
Subject: Re: Gas Tank Question again
It's actually the exact same tank, but the 19 gallon version has some internal mods to give it the increased capacity. I've heard of those that have taken the smaller capacity tank and altered it to hold the 19 gallons. Why Jeep bothers with 2 sizes is beyond me, though.
Doug
----- Original Message -----
From: David R. W. Withers
To: az_vjc@yahoogroups.com
Sent: Tuesday, September 04, 2001 3:59 PM
Subject: [az_vjc] Gas Tank Question again
This site says that there was an optional tank
http://www.media.chrysler.com/wwwprkt/2452.htm#fuel
_____________
David R. W. Withers
Network Engineer/ Senior QA Engineer
È 480-215-6992
' 480-551-4667
* dwithers@atstraffic.com
_____________
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
30554 From: DougB <azjeep@h...>
Date: Tue Sep 4, 2001 6:03pm
Subject: Re: Jeep has new paint!!!
No longer turd brown??...say it ain't so....<bg>
Doug
----- Original Message -----
From: <cmandrick@h...>
To: <az_vjc@yahoogroups.com>
Sent: Tuesday, September 04, 2001 4:48 PM
Subject: [az_vjc] Jeep has new paint!!!
> Check it out, I painted my Jeep! Look under my photo gallery on the
> website. I am proud of the custom painted towhooks as well!
>
> Chris M
> 87 YJ
>
>
>
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
30555 From: DougB <azjeep@h...>
Date: Tue Sep 4, 2001 6:22pm
Subject: Re: Jeep has new paint!!!
BTW - how many rattle cans it take?? <jk>
Actually - looks pretty good. BUT - you need new stickers!!
You must have just done it, since I thought I saw your YJ at Chili's (Flag)
on Monday.
Doug
----- Original Message -----
From: "DougB" <azjeep@h...>
To: <az_vjc@yahoogroups.com>; <cmandrick@h...>
Sent: Tuesday, September 04, 2001 6:03 PM
Subject: Re: [az_vjc] Jeep has new paint!!!
> No longer turd brown??...say it ain't so....<bg>
>
> Doug
>
> ----- Original Message -----
> From: <cmandrick@h...>
> To: <az_vjc@yahoogroups.com>
> Sent: Tuesday, September 04, 2001 4:48 PM
> Subject: [az_vjc] Jeep has new paint!!!
>
>
> > Check it out, I painted my Jeep! Look under my photo gallery on the
> > website. I am proud of the custom painted towhooks as well!
> >
> > Chris M
> > 87 YJ
> >
> >
> >
> >
> >
> >
> > Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
> >
> >
>
30556 From: James Towle <James.Towle@a...>
Date: Tue Sep 4, 2001 6:18pm
Subject: Re: Gas Tank Question
Last time I pulled my tank I was trying do adjust the float but
couldn't get the pump assy to unscrew from the tank.
I would love to try this when I install my new Kilby skid plate.
--James
--- In az_vjc@y..., dkober@g... wrote:
> Thought I'd throw some more fuel on the fire, so to speak.
> I ran my 99 TJ 15 gal. tank to fumes today, filled with 16.313
> gallons.
>
> Here's a different procedure on the TJ gas tank enlargemnet.
>
> Has anyone tried any of these mods on a TJ?
>
> http://www.jedi.com/obiwan/jeep/15to20gal.html
30557 From: Scott Maiden <bermboy@h...>
Date: Tue Sep 4, 2001 6:39pm
Subject: Re: SYE Snap Ring Pliers
Well Bill lives the closest so I will borrow his pliers but thanks for all the offers. This club is great!! Ok, Let me know when I can come borrow them and exactly where you live I am on Dobson & Elliot and will probably start on thurs or friday. Thanks alot.
Scott "Iron" Maiden
01 GSX-R 750....o~`o
http://www.scottmaiden.gixxer.com
bermboy@hotmail.com
>From: Bill Aylesworth
>To: James Junkin , az_vjc@yahoogroups.com, Scott Maiden
>Subject: Re: [az_vjc] SYE Snap Ring Pliers
>Date: Tue, 4 Sep 2001 14:53:01 -0700 (PDT)
>
>Hey Scott,
>I have a pair you can use. I live in the Chandler
>area. (Elliot and 101) I have the big Snap on ones
>with the serrated jaws and the drilled detent. They
>are the only tool for the job!
>
>Bill A.
>M38A1
>
>Hate to say it, but sometimes a hammer just won't
>work.
>
>
>--- James Junkin wrote:
> > The kind you want for the external rings have
> > serrated "Jaws" which will actually hold the ring
> > open while you remove it from the shaft. Try
> > Snap-On or maybe Sears.
> > DO NOT EVEN attempt to remove the rings with a
> > cheapo pair with pins, etc. It'll take you all day.
> > James Junkin
> > O|||||||O
> > '81 SJ Cherokee "Midnight"
> > '97 TJ "Tar Baby"
> > '98 TJ "Crimson Ride"
> > ----- Original Message -----
> > From: Scott Maiden
> > To: az_vjc@yahoogroups.com
> > Sent: Tuesday, September 04, 2001 2:34 PM
> > Subject: [az_vjc] SYE Snap Ring Pliers
> >
> >
> > Where are you guys getting the big snap ring
> > pliers I have heard about for pueeing in a sye It is
> > a JB conversions btw.
> >
> >
> >
> >
> >
> >
> > Scott "Iron" Maiden
> > 01 GSX-R 750....o~`o
> > http://www.scottmaiden.gixxer.com
> > bermboy@hotmail.com
> > >From: "Roger Tomas"
> > >To: Scott Maiden
> > >Subject: Re: [az_vjc] Shops and Springovers
> > >Date: Mon, 13 Aug 2001 09:30:39 -0700
> > >
> > >Scott,
> > >
> > >You need to research spring-overs and decide
> > exactly how you want yours done.
> > >There are a number of ways to do it - some ways
> > are much more expensive than
> > >others. For example, I once talked to the
> > fabricator at 4Wheelers Supply about
> > >a spring-over and he mentioned "4-link this or
> > that" and the price was to be
> > >about
> > >$3000. Of course, a 4-link set-up is very
> > elaborate but it isn't necessary.
> > >But,
> > >there is a minimal way to do a spring-over and
> > there are various degrees of
> > >added
> > >complexity. (For example, steering geometry can
> > be address with drop pitman
> > >arms.,
> > >funny shaped drag links, etc. or you could go
> > with high-clearance steering).
> > >
> > >In the end, you'll be better able to compare
> > shops if you decide exactly what
> > >you
> > >want and then have the shops quote you prices for
> > what you want and not for what
> > >
> > >they would give you if you didn't state exactly
> > what you want.
> > >
> > >BTW, Macromotive is strictly a mail order
> > retailer and they don't do service.
> > >However,
> > >they are affiliated with Offroad Unlimited which
> > does provide service. I don't
> > >know
> > >if they do fabrication type service, though.
> > >
> > >-Roger
> > >
> > >Scott Maiden wrote:
> > >
> > > >
> > > >
> > > > Hey All,
> > > >
> > > > I know I know, real jeeps are built not bought
> > but I don't feel comfortable
> > > > doing a springover myself, being new to the 4
> > by world where whould be the
> > > > best place be to go have my 93 YJ sprung over?
> > 4Wheelers Supply? OR-Fab?
> > > > Hunter Offroad? Macromotive? Any I am missing?
> > tia and btw what is hunters web
> > > > site?
> > > >
> > > >
> > > > Scott "Iron" Maiden
> > > >
> > > > 93 Green YJ
> > > >
> > > > 01 GSX-R 750....o~`o
> > > >
> > > >
> > > >
> >
>-------------------------------------------------------------------------------
> >
> > > > Get your FREE download of MSN Explorer at
> > http://explorer.msn.com
> > > >
> > > > Your use of Yahoo! Groups is subject to the
> > Yahoo! Terms of Service.
> > >
> >
> >
> >
>------------------------------------------------------------------------------
> > Get your FREE download of MSN Explorer at
> > http://explorer.msn.com
> >
> > Your use of Yahoo! Groups is subject to the Yahoo!
> > Terms of Service.
> >
> >
>
>
>__________________________________________________
>Do You Yahoo!?
>Get email alerts & NEW webcam video instant messaging with Yahoo! Messenger
>http://im.yahoo.com
--------------------------------------------------------------------------------
Get your FREE download of MSN Explorer at http://explorer.msn.com
30558 From: Daddy Longlegs <scottkruize@e...>
Date: Tue Sep 4, 2001 8:10pm
Subject: RE: TeraLo
Tom,
What is the first gear ratio on your auto? 3.06 is a fairly steep ratio for
an auto. If we give your auto the benefit of the doubt and we use that
number your actual crawl ratio in first gear might be 56:1. Yes the auto
seems to multiply that figure but the REAL ratio is still 56:1.
Jon has a 5 speed so his ratio would actually be higher than
yours(3.86*4*4.56)= 70.4:1. But once again the torque converter seems to
raise the felt ratio compared to his.
Correct me if I'm missing something here. This is all friendly in nature :)
Anybody have any input as to how much the auto affects this? I'm curious.
Please back up your responses if you can.
Regards,
Scott
-----Original Message-----
From: tom le [mailto:tomle_85024@y...]
Sent: Tuesday, September 04, 2001 9:49 AM
To: Jon Loveless; az_vjc@yahoogroups.com
Subject: Re: [az_vjc] TeraLo
Jon,
That's an excellent decision to go to 4.56s. This is
the current setup on ZJ w/ about 100:1 CR (106" wb,
36" SSR, 4.56s, and auto transmission). I've
experienced the same thing on the whine noise at
higher revs on mine and according to Teraflex where I
purchased the Teralow4:1, it is normal. Are you going
to install the new gears & Teralow all by yourself?
Tom
--- Jon Loveless <jonloveless@m...> wrote:
> It is normal. It is chain driven and with the low
> gears you tend to get a
> serious whine at higher revs in anything but 1st.
> TeraFlex also cautions
> against running your Jeep in higher gears in 4low
> for very long due to the
> excessive speed. It sounds bad enough so that isn't
> a problem. I just found
> that I have a real gap between 1st Hi and 1st Lo.
> With 3.73 gearing and
> 35's I am geared too high for slow trails in 1st Lo
> and too low for 1st Lo
> much of the time. I am going to 4.56 this week to
> give myself a better 1st
> Hi ratio (and of course - much better true crawl).
>
> Jon
>
>
> At 04:21 AM 9/4/2001 +0000, you wrote:
> >But finally got in and the jeep moving. Works
> good, but lots of
> >noise in 2nd and up in 4LO; I've heard that is
> normal though.
> >
> >
> >
> >
>
>
> Jon Loveless
> (480) 816-6240
>
>
>
>
> Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
>
>
__________________________________________________
Do You Yahoo!?
Get email alerts & NEW webcam video instant messaging with Yahoo! Messenger
http://im.yahoo.com
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
30559 From: Daryl Faust <louddog71@y...>
Date: Tue Sep 4, 2001 8:38pm
Subject: Emissions test
I have a 86 CJ7, stock configuration, due for
emissions test this month. Anyone have any advice to
help me pass?
__________________________________________________
Do You Yahoo!?
Get email alerts & NEW webcam video instant messaging with Yahoo! Messenger
http://im.yahoo.com
30560 From: <jeepin_in_az@y...>
Date: Tue Sep 4, 2001 9:00pm
Subject: Re: Emissions test
I had an 88 YJ, and it always passed with no problems, and the engine
was stock. Have you had problems before?
Mike
--- In az_vjc@y..., Daryl Faust <louddog71@y...> wrote:
> I have a 86 CJ7, stock configuration, due for
> emissions test this month. Anyone have any advice to
> help me pass?
>
>
>
> __________________________________________________
> Do You Yahoo!?
> Get email alerts & NEW webcam video instant messaging with Yahoo!
Messenger
> http://im.yahoo.com
30561 From: Mike Baney <jeepin_in_az@y...>
Date: Tue Sep 4, 2001 9:07pm
Subject: ju: free skid plate
http://forums.jeepsunlimited.com/ubb/Forum4/HTML/009597.html
A couple of people have posted looking for a stock skid plate, here is one
free + shipping
Mike
__________________________________________________
Do You Yahoo!?
Get email alerts & NEW webcam video instant messaging with Yahoo! Messenger
http://im.yahoo.com
30562 From: Stu Olson <solson8@q...>
Date: Tue Sep 4, 2001 9:47pm
Subject: RE: Contacted Teraflex Re: 231 Shift Fork Mod.
Dan,
Several years ago, when I bought my first lift, a Tera 2" coil kit, I found
that the directions for it where terrible!
I called Tera about it (after the lift was installed) and told them how bad
they were. Their response was that the lift was intended to be primarily
marketed to dealerships for in-house installation. As such, the dealership
mechanics did not require much in the way of instructions.
I explained to them that since the kit was sold at retail, they owed their
customers a good set of directions to follow. In about 4 months, I received
a copy of the new instructions (much was taken from my web site install
write-up).
So, they did come through with it and even remembered to send me a copy via
snail mail.
Stu
Stu Olson
www.stu-offroad.com
-----Original Message-----
From: Dan Coley [mailto:mt_b@y...]
Sent: Tuesday, September 04, 2001 2:57 PM
To: az_vjc@yahoogroups.com
Subject: [az_vjc] Contacted Teraflex Re: 231 Shift Fork Mod.
Called up and spoke to Brandon that is in charge of the Teralow
dept. I told him the addendum that was added to the Teralow
instructions wasn't entirely accurate nor extremely beneficial. He
said he knows that alot of the 231 t-cases have had to have the shift
fork shortened, but was not aware that the instructions only called
out for the 2001 models and did not explain exactly what needs to be
done. He said he would work on rewriting the addendum to include all
models, as well as explain in more detail exactly what has to be done
in order to obtain correct shifting.
For me it was pretty obvious as to what had to be done, however I
don't think that when your working on something as important as a
transfer case, you shouldn't have to guess at what the instructions
are implying.
Chances are I won't know if any changes are made, until I go to put a
Teralow in Tara's jeep, but if he does get it done, then that would
represent great customer service; and maybe some other people won't
have to go through the same hassle and jeep down-time I did.
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
30563 From: James Towle <James.Towle@a...>
Date: Tue Sep 4, 2001 9:56pm
Subject: Contacted Teraflex Re: 231 Shift Fork Mod.
> In about 4 months, I received a copy of the new
> instructions (much was taken from my web site install
> write-up).
........
> Stu
>
> Stu Olson
> www.stu-offroad.com
They know good writing when they see it. Why mess with perfection? ;)
--James
30564 From: AzVJC Website <jraya@a...>
Date: Tue Sep 4, 2001 10:10pm
Subject: [FS] 2001 OFFROAD/SAND BUGGY
Price: $24,000.00
Contact: BRENT @ McKee Motorsports (520)-292-2653
2001 4 Seater Buggy, 2332 VW Engine, 930 CV's, Fox Shocks
Coil Over, Beard Seats, Diest 5 pt. Hanesses, 18" Travel
Front &; Rear, New Tranny, MSD Ignition, Power Steering,
Fodril Arms, Wright Jumbo Spindles, Disc Brakes Front
&; Rear, Close to street Legal, Too much to list. If you
know anyone who might be interested please pass this
along.
Please call Brent @ 520-292-2653
Mike Raya
30565 From: David O'Boyle <davidoboyle@h...>
Date: Tue Sep 4, 2001 10:35pm
Subject: Gila Monster/sunday
Had a blast guys, Thanks for comming out to see my side of the globe...
Stay tuned there is more to come from the West side.......
Scott, the map looks great. Call me when your ready to head out again.
Joey, is it ok to use the link to your shots for the writeup???
Later
Dave
623-327-1486
__________________________________________________ _______________
Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp
30566 From: David O'Boyle <davidoboyle@h...>
Date: Tue Sep 4, 2001 11:02pm
Subject: Slave Cylinder WOAHHSS!!!! revisited again :(
Well Gang,
Yet another Slave cylinder bites the dust.. 4th one in 3 years..
The most recent on was changed with all MOPAR parts.
clutch, pressure plate, fluid, slave cylinder.
Anyone devise a modification to eliminate the hydrolic slave cylinder and
convert to a regular old throwout bering??? I'd be really interested in this
type of setup if any of you FAB guys have devised such a creation.. The AX15
is a good tranny but the slave cylinders SUCK!!!
I have tried every brand and frankly I am sick of tearing out my tranny to
replace this repeatedly faulty part. So if you or anyone you know has
modifyed or is in the process of modifying/eliminating this part please
contact me..
Thanks a bunch
Dave
623-327-1486
__________________________________________________ _______________
Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp