Switch on switched hook up

[HighlandRubicon]

I need some help to finish my wiring up rock lights and additional driving lights. Everything is done, except hooking up the 4 switches to a switched source. The center console on an 04 Rubicon is off, but now I'm lost. Help/advice would be greatly appreciated.

Thanks,
Ian

[FrenchChili]

U can mount them on the panel that's below your steering wheel. 1" from the borders to be safe. It is possible to mount them in the center part of the dash.
There are many places to mount them. Just find one you feel comfortable with then see if it's ok for the wiring.

Wires: Under your dash, near bottom left, there are a bunch of wires going through a rubber plug, u can use that to pass your wires through or any other plugs if you drill a small hole.

Grounds: One of the main bolt that holds the steering shaft works well. On the floor board in front of the center console/under dash there are at least 4 bolts bolted to the body that work really well. And if you can find a ground for other wires then that's great too.