Apprentice Wanted

[jeepin_in_az]

I am looking for someone to help out in hte evenings and weekends. This is not full time, but more of when I get busy. Pay is not great, in fact I haven't thought about what I will pay yet. This is more of an opportunity to learn about fabrication.

What I am looking for someone to do:

Cut steel to size using a chop saw and band saw.
Cleaning the edges of cut steel with grinder, file, etc.
Drill some holes, counter sink some holes using drill press.
Maybe some grinding for shaping.
Possibly using torches.
Use common sense!!!

No tools needed, I have everything. I also have gloves, face shields, etc.

I am located in Chandler off Pecos and McQueen, so I would prefer someone close and reliable!

Please PM me your interest and if you have any experiance along with your phone number.

I don't have time to teach you how to weld, but if you are patient that will come eventually. I need someone that can look at my cut list and just start cutting.

[azdesertrhino]

I am looking for someone to help out in hte evenings and weekends. This is not full time, but more of when I get busy. Pay is not great, in fact I haven't thought about what I will pay yet. This is more of an opportunity to learn about fabrication.

What I am looking for someone to do:

Cut steel to size using a chop saw and band saw.
Cleaning the edges of cut steel with grinder, file, etc.
Drill some holes, counter sink some holes using drill press.
Maybe some grinding for shaping.
Possibly using torches.
Use common sense!!!

No tools needed, I have everything. I also have gloves, face shields, etc.

I am located in Chandler off Pecos and McQueen, so I would prefer someone close and reliable!

Please PM me your interest and if you have any experiance along with your phone number.

I don't have time to teach you how to weld, but if you are patient that will come eventually. I need someone that can look at my cut list and just start cutting.

If you ever decide to open a Tucson branch I'd be happy to help you out! :D

[jeepin_in_az]

You can make the trip up a couple times a week Jim! :D It's only an hour drive to Chandler...

[azdesertrhino]

You can make the trip up a couple times a week Jim! :D It's only an hour drive to Chandler...

I think the gas it would cost to travel back & forth would be more than "Apprentice" wages could stand!! ;)

[mingoglia]

I am looking for someone to help out in hte evenings and weekends. This is not full time, but more of when I get busy. Pay is not great, in fact I haven't thought about what I will pay yet. This is more of an opportunity to learn about fabrication.

What I am looking for someone to do:

Cut steel to size using a chop saw and band saw.
Cleaning the edges of cut steel with grinder, file, etc.
Drill some holes, counter sink some holes using drill press.
Maybe some grinding for shaping.
Possibly using torches.
Use common sense!!!

No tools needed, I have everything. I also have gloves, face shields, etc.

I am located in Chandler off Pecos and McQueen, so I would prefer someone close and reliable!

Please PM me your interest and if you have any experiance along with your phone number.

I don't have time to teach you how to weld, but if you are patient that will come eventually. I need someone that can look at my cut list and just start cutting.

I'd help you for free and only live a mile away... but I think the wife wouldn't be so enthusiastic about that proposition.

[UNSTUCK]

PMed you.

[jeepin_in_az]

Josh, I got your PM...are you gonna be around this evening sometime after 8:00?

[UNSTUCK]

Sorry I missed you Mike, I left just after writing you and just got back. Call me any time tomarrow after noon.
Thanks,
Josh.

[terron gregg]

hey there im new to this site and was wondering if you still needed someone i am an electrician and am looking for a place where i can get my feet wet with pre fab fab work welding any and all sorts of work like this willing to work for cheap and or bartering if you still need some one call me at 480-544-5129 im not a flake and im a hard worker

[Rogue XJ]

Firstly... a bit about me... I work full-time near Chandler and McClintock M-F 8 to 5 as a tech specializing in BMW and Volvo although I have 20 years experience working on all makes and models. I have limited fabrication experience, especially as of late having taken up welding to make hard-core fab stuff for my first 4 wheeler.. an XJ I purchased last year (check out the bumper I built using a discarded alignment rack crossbeam, 1/4 thick front/back) I also have limited experience working in a stainless steel fab shop.

I have a couple of questions for you...

1. will the work be performed primarily in a shop? if so.. is it air conditioned, or swamp coolers or?

2. will the work be primarily for automotive? if not.. what?

Thanks for your time.

Tim

[RokNRich]

LOL

Look at the date this was posted.

Mike (jeepininaz) has moved on I believe, drives a car now :p :o :eek:

[k7mto]

LOL

Look at the date this was posted.

Mike (jeepininaz) has moved on I believe, drives a car now :p :o :eek:

And a rather nice car at that, if I recall.

Say, Rich, why the JPCooler sig plug? You a dealer now?

[Rogue XJ]

oops, my bad, I mistook the previous post's date to mean that the topic was somewhat near current. guess that will teach me to post replies while taking vicodin for mouth surgery :eek:

[nobey4x4]

I'd be glad to help out, already have most of the experiance you require.
let me know if your still looking for some help. I'm at Kyrene and 202, ten minutes away. I'm on my third jeep build. currently have a 91 XJ w/ 10.5" gen 2 rock crawler lift, 35" pro comps xterrain's, locked front and back etc...

[Fire Ball]

Lmfao

[terron gregg]

glad to see i wasn't the only one who didn't look at the dates on the post i feel like an idiot

[Rogue XJ]

well, there you have it.... able bodied apprentices seeking mentors? ;) :D ...and that... you can take to the bank... today!

[jeep4offrd]

No more Jeep for Mikey.

[jeep4offrd]

Hey Mike
What are you driving now?