Clearing the check ingine light...

[Heaney]

I have a '05 Wrangler... Forgot to put my gas cap on and now my check engine light is on...


How do I clear it?

[AZG23]

Quick clear is to unplug the battery for a few minutes...

longer clear is in the thread titled

CEL...0122

in this forum

[AZG23]

here ya go

http://www.virtualjeepclub.com/showthread.php?t=11627

[SavageSun4x4]

Quick clear is to unplug the battery for a few minutes...

longer clear is in the thread titled

CEL...0122

in this forum
For a quick clear, pull the Pos cable and touch it to the neg cable attached to the neg post. for a clear and reset tables:
1.Disconnect the POSITIVE battery Terminal and touch it to neg post for 30 seconds. (This is to discharge the PCM capacitors, which maintain the Adaptive Memory.)
2.Reconnect the Battery Cable
3.Turn Ignition Switch to the “On” position but DO NOT start the engine
4.Turn Headlight “On”
5.Turn Headlights “Off”
6.Turn Ignition Key “Off”

[Heaney]

Thank you! Went out to clear it, and it turned off by itself.