PDA

View Full Version : Misc Jeep parts and lift parts


Turtle
01-07-2006, 08:40 AM
4" Sky Jacker coils... this is all 4 coils. They rode great and flexed awesome!! They have however, sagged a little bit. Now they sit at about 3.75" or so. $150

Teraflex 1st gen. longarm upgrade. This includes 2 front lower arms, 2 rear lower arms and the mounting brackets. The arms are fully adjustable and use poly bushings at both ends. They have new bushings all around. They do not have the biggest size, however, I have used them and abused them VERY hard and they have not bent on me yet! $250

stock front and rear tracbars - $10 a piece

Stock draglink - $70

Tierod - This started out as a stock tie rod. Then I wanted stronger... I cut it in half and slid a piece of solid stock inside then welded it back together... then I sleeved it with a piece of sch. 40 1" pipe. I have hammered this tie rod and it has held up great so far. It does need new ends though. $65

D35c from a TJ. This has 3.73 gears, great brakes and all brackets. It also includes a lockrite locker.

I will seperate and sell the shafts at $50 a piece and the locker for $150 or sell the whole axle for $200

All these parts or best offers!

I will consider trades for: HPD30 4.88's, D30 and Ford 9" master insall kits, 4.5" or so front coils, adjustable front trac bar, heim joints, D30 balljoints, or most importantly tranny parts for the 3spd auto behind a 4cyl TJ.

Thanks!

Turtle
YZGUYONE25@aol.com
623-523-4527

jeepnut7261
01-11-2006, 02:52 PM
PM'd ya Dude!

rockwerks
01-11-2006, 03:09 PM
interested in the axle......how about I make you a custom trackbar for trade for the d35

I also have a working 904 auto trans from an xj

what size heim joints?