blooddrive
01-03-2004, 12:13 PM
19572-19596
19572 From: Jesus Chio - Alloffroad.com <jchio@a...>
Date: Thu Mar 1, 2001 5:01pm
Subject: Re: Fw: Disk Brakes
Linda I know you have a Cherokee and a friend wants better shocks than
Rancho 9000s, do you know of any model or a source of Information I can
access to look for that?
thanks in advance
Jesus Chio
Vice-President, Offroad Image
Chief Editor, AllOffRoad.com
__________________________________________________ ______________________
Webpage and email 4 free @ http://www.alloffroad.com
Park your truck in http://rr.AllOffRoad.com
__________________________________________________ ______________________
----- Original Message -----
From: "linda luik" <minihummer@w...>
To: "azvjc" <az_vjc@yahoogroups.com>
Sent: Wednesday, February 28, 2001 5:32 PM
Subject: Re: Fw: [az_vjc] Disk Brakes
> My boyfriend did the same thing. Had the same problems. He even modified
> the backing plate to fit and then discovered that the rotors wouldn't
> fit. Period. Stainless and OffRoad UnLtd were gracious enough to take
> the modified parts back. You might check TSM for a disc brake
> conversion kit.
>
> Linda
>
> George Andrews wrote:
> >
> > I would not recommend Stainless Steel Brakes....I installed their rear
disc
> > kit. Parts they sent were wrong, service was terrible, and the kit makes
no
> > difference. If I did it over again, I'd beef up the drums.
> >
> > George Andrews
> > '83 Cherokee WT, 454TBI, TH400, QT, D44s, 35x12.50s, ARBs
> > '00 TJ
> > Avondale Arizona
> >
> > -----Original Message-----
> > From: Scott Thomas <sthomas@a...>
> > To: az_vjc@yahoogroups.com <az_vjc@yahoogroups.com>
> > Date: Tuesday, February 27, 2001 5:03 AM
> > Subject: [az_vjc] Disk Brakes
> >
> > >Hey does anyone have rear disc brakes? If so how hard and is it to
change
> > >them out on a 97 Tj? What kind of price am I looking at? What kind of
> > >performance difference is it?
> > >
> > >Thanks,
> > >Scott Thomas
> > >97 Tj
> > >
> > >
> > >
> > >
> > >Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
> > >
> > >
> >
> >
> >
> > Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
--------------------------------------------------------------------------------
ADVERTISEMENT
19573 From: Hackle <hackle@u...>
Date: Wed Feb 28, 2001 5:15pm
Subject: Re: Tire Pressure
I run 28 on the street 33x12.5x15's on an 89 YJ.
I refuse to belong to any group that would have me as a member!
19574 From: George Andrews <gandre01@m...>
Date: Wed Feb 28, 2001 5:39pm
Subject: Re: Cherokee for sale
Sounds like a cool rig...I'll post it on teh FSJ list.
George Andrews
'83 Cherokee WT, 454TBI, TH400, QT, D44s, 35x12.50s, ARBs
'00 TJ
Avondale Arizona
-----Original Message-----
From: garegb@aol.com <garegb@aol.com>
To: az_vjc@yahoogroups.com <az_vjc@yahoogroups.com>
Date: Tuesday, February 27, 2001 11:26 PM
Subject: [az_vjc] Cherokee for sale
Hey everybody
I know this is selfish of me to sell my stuff here, but it is a
jeep. I have a 1980 Cherokee Chief that I very much would enjoy getting rid
of. It has a 360(tired) 727 automatic (20k on rebuild) NP219 full time
transfer case (also 20k on rebuild w new chain), model 44 front(driver side
pumpkin) model 20 rear (one piece not the crappy cj unit) gears unknown.
fairly new 3 core radiator from modine, Aluminum 6 lug wheels, 3 inch
flowmaster single exhaust with a high flow catalytic converter, also 20k
miles, emissions equip is also fairly fresh and it did pass last summer.
Needs lots of work asking 1800$ obo. Anyone interested please call me at 602
708 1292.
Greg B. '51
Willys Panel
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
19575 From: George Andrews <gandre01@m...>
Date: Wed Feb 28, 2001 5:37pm
Subject: Fw: Disk Brakes
Yep! I've installed a new proportioning valve and master specifically
designed for discs all around...just need to get the vehicle road worthy to
test them. I still don't recommend SSBC.
George Andrews
'83 Cherokee WT, 454TBI, TH400, QT, D44s, 35x12.50s, ARBs
'00 TJ
Avondale Arizona
-----Original Message-----
From: Stu Olson <solson8@q...>
To: George Andrews <gandre01@m...>; azvjc <az_vjc@yahoogroups.com>
Date: Tuesday, February 27, 2001 7:31 PM
Subject: RE: [az_vjc] Disk Brakes
>Geroge,
>
>I had a friend of mine install a set of rear discs from Stainless Steel
>Brakes and it was not until he bypassed his proportioning valve did he get
>the performance he was expecting.
>
>He is an retired engineer and so he started calculating the hydraulic
>pressures being generated by his CJ-7 master cyclinder, the volume of the
>rear disc calipers....the hole "design thing". He found that they were
>being grossly under powered....by about 50% of what was needed. The people
>at Stainless, according to him, really didn't have a clue about what he was
>talking about (ie., poor design team...if any) when he consulted them for
>assistance.
>
>Anyway, once he got that little problem taken care of, he can now safely
>hold himself on the very steep hills in just 2WD...where before, these same
>hills would cause his vehicle to start backwards and go into a skidding
>rollover.
>
>Stu
>
>> -----Original Message-----
>> From: George Andrews [mailto:gandre01@m...]
>> Sent: Tuesday, February 27, 2001 6:54 PM
>> To: azvjc
>> Subject: Fw: [az_vjc] Disk Brakes
>>
>>
>> I would not recommend Stainless Steel Brakes....I installed their
>> rear disc
>> kit. Parts they sent were wrong, service was terrible, and the
>> kit makes no
>> difference. If I did it over again, I'd beef up the drums.
>>
>> George Andrews
>> '83 Cherokee WT, 454TBI, TH400, QT, D44s, 35x12.50s, ARBs
>> '00 TJ
>> Avondale Arizona
>>
>> -----Original Message-----
>> From: Scott Thomas <sthomas@a...>
>> To: az_vjc@yahoogroups.com <az_vjc@yahoogroups.com>
>> Date: Tuesday, February 27, 2001 5:03 AM
>> Subject: [az_vjc] Disk Brakes
>>
>>
>> >Hey does anyone have rear disc brakes? If so how hard and is it
>> to change
>> >them out on a 97 Tj? What kind of price am I looking at? What kind of
>> >performance difference is it?
>> >
>> >Thanks,
>> >Scott Thomas
>> >97 Tj
>> >
>> >
>> >
>> >
>> >Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
>> >
>> >
>>
>>
>>
>>
>>
>>
>> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>>
>>
>>
>
19576 From: <flatfenderman@a...>
Date: Wed Feb 28, 2001 0:34pm
Subject: Re: 350 in a CJ7 motor mounts question
Jesus,
It is very common to offset any motor towards the drivers side on a CJ engine
swap. Normally its done so that there is no interference between the front
diff/drive shaft at the bell housing, not to mention needed clearance for the
oil pan and differential. If your having linkage problems I would recommend
going to a set of pedals from a later model CJ7 that had a hydraulic clutch
and then finding a slave cylinder to work on your transmission. Jeeps always
seem to have problems with clutch linkage binding during extreme flex, so the
juice clutch is the way to go. I may still have a set of these pedals laying
around here from the 85 CJ7 I scraped out last year, if you want them I will
see if I can find them, if there here, I mail them to you.
Chris
19577 From: Ralph Williams <ralph@p...>
Date: Wed Feb 28, 2001 5:50pm
Subject: Re: Tucson bound
Don't know what side of town you will be on so....
I like the Timber Lodge at Ina and Thornydale. The chain (this is
the only one is AZ that I know of) is from Minnesota, they fly
all their meat from Minneapolis every other day. The prime rib is
very good and they also have Walleye. Prices are reasonable and
the wait is bearable, and noise at low levels.
Another suggestion is the Thunder Canyon Brewery at the Foothills
Mall at Ina and La Cholla. Great selection of specialty beers
brewed on the premises and good food also. A little noisy tho'.
There are two for you on the Northwest side. There are quite a
few good places here.
Would possibly be able to meet you. My wife is most likely
working those nights. (she is a nurse)
Ralph Williams
Mike Baney wrote:
>
> Hi members in the Tucson area! My wife and I are
> coming down there March 7th and 8th, I have some work
> to do down there. We are going to go out to dinner on
> the 7th, and were wondering if any members had a good
> suggestion for a resturant and to see if they wanted
> to meet for some drinks after dinner, and hang out.
> Any suggestions for dinner would be great, we like
> everything from chinese, italian, bbq, almost
> anything!
>
> Mike Baney
>
> =====
> 2001 TJ
>
> __________________________________________________
> Do You Yahoo!?
> Get email at your own domain with Yahoo! Mail.
> http://personal.mail.yahoo.com/
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
19578 From: <trmn8rjn98@a...>
Date: Wed Feb 28, 2001 5:52pm
Subject: Raw Deal with ok for TJ No lift 31" tires?
Subject says it all who has done it? Is it ok or likely to pound the
skids to heck?
John
19579 From: Greg Stapley <love24wheel@h...>
Date: Wed Feb 28, 2001 6:10pm
Subject: Re: Raw Deal with ok for TJ No lift 31" tires?
The good thing about raw deal is that you can choose what obstacles you want to tackle, unless you do upper too..But I would say you definatley could do raw deal..
Greg
>From: trmn8rjn98@aol.com
>To: az_vjc@yahoogroups.com
>Subject: [az_vjc] Raw Deal with ok for TJ No lift 31" tires?
>Date: Thu, 01 Mar 2001 01:52:17 -0000
>
>Subject says it all who has done it? Is it ok or likely to pound the
>skids to heck?
>John
>
>
>
>
>
>Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
--------------------------------------------------------------------------------
Get your FREE download of MSN Explorer at http://explorer.msn.com
19580 From: Leonard K. Pennock <leonardpennock@h...>
Date: Wed Feb 28, 2001 6:14pm
Subject: Re: Tire Pressure
32x11.50-15 on 8" rims on an XJ, 26psi.
James Smith wrote:
>
> Ok,
> Simple question..
> Maybe..
> What tire pressure does everybody run, during normal
> day to day driving around town?
>
> 31' BFG AT
> 95 yj
>
> thanks,
>
> Smitty
>
> __________________________________________________
> Do You Yahoo!?
> Get email at your own domain with Yahoo! Mail.
> http://personal.mail.yahoo.com/
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
--
Leonard K. Pennock
Those who walk bravely through life, unafraid of loss or failure,
find that they very rarely lose or fail.
19581 From: Hackle <hackle@u...>
Date: Wed Feb 28, 2001 6:17pm
Subject: Fw: Raw Deal with ok for TJ No lift 31" tires?
You are fine Raw Deal is as easy or as hard as you want it to be. Wide wash
lots of different lines great beginner run. But can be hard enough for a
challenge. Enjoy the run.
I refuse to belong to any group that would have me as a member!
> ----- Original Message -----
> From: <trmn8rjn98@a...>
> To: <az_vjc@yahoogroups.com>
> Sent: Wednesday, February 28, 2001 6:52 PM
> Subject: [az_vjc] Raw Deal with ok for TJ No lift 31" tires?
>
>
> > Subject says it all who has done it? Is it ok or likely to pound the
> > skids to heck?
> > John
> >
> >
> >
> >
> >
> > Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
> >
> >
> >
>
19582 From: <thewickers@y...>
Date: Wed Feb 28, 2001 7:23pm
Subject: Re: Tucson Bound
There is another great restaurant on the Northwest side, Lil Abners,
great steak and ribs. Quite possibly the best I've had in Tucson.
Gavis italian restaurant also in the foothills mall is also quite
good. If I am in country,(may be travelling to Chile those dates) my
wife and I love to go out to eat.
Alan
94YJ SOA Locked
Warn 8000 winch
19583 From: <JEEPER401@a...>
Date: Wed Feb 28, 2001 2:29pm
Subject: Re: Looking for AMC 360
Have a 360 builder. $150. Also have a built 401 for sale. $2000.
Steve
76 CJ5
19584 From: Roxie <Roxie@t...>
Date: Wed Feb 28, 2001 7:48pm
Subject: OT - Earthquake!
I first bought parking at the Westin Hotel for The Little Red Sled - but ended up parking my baby Jeep at Pike Market. Thank god! The Westin had a ton of problems today during our 6.8 earthquake - some cars were smashed. My baby Jeep is OK :-)
-Stacy-Michelle
TheJeepGoddess.com
"Silly Boys, Jeeps are for Girls"
19585 From: Ralph Williams <ralph@p...>
Date: Wed Feb 28, 2001 8:05pm
Subject: Re: Semi-O/T help for a fellow Jeeper (Sierra Club initiative in Phoenix Prop 301?)
Kevin, since you posted in HTML my email doesn't quote your text.
Tell your friend to go to this URL, it was Proposition 202.
http://www.sosaz.com/election/2000/Info/pubpamphlet/english/contents.htm
Hope this helps,
Ralph
19586 From: Scott Kruize <osmtj@y...>
Date: Wed Feb 28, 2001 8:05pm
Subject: Re: Tire Pressure
I run 25 PSI street on 35" MT/R's.
Scott
linda luik wrote:
32 front, 30 rear 285/75r16s
James Smith wrote:
>
> Ok,
> Simple question..
> Maybe..
> What tire pressure does everybody run, during normal
> day to day driving around town?
>
> 31' BFG AT
> 95 yj
>
> thanks,
>
> Smitty
>
> __________________________________________________
> Do You Yahoo!?
> Get email at your own domain with Yahoo! Mail.
> http://personal.mail.yahoo.com/
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
--------------------------------------------------------------------------------
Do You Yahoo!?
Yahoo! Shopping - Thousands of Stores. Millions of Products.
19587 From: Kevin <nau88xj@h...>
Date: Wed Feb 28, 2001 8:29pm
Subject: Re: [TR] Raw Deal (Lower) - Sunday, March 4, 2001
ILL BE THERE....these new BFG muds look coo on the jeep....and i might have my pair of revolvers that i ordered for the front of the CJ in before sunday if i am lucky!!! just ordered them today, but tera told me they had them in stock!
kevin
----- Original Message -----
From: FLEXYXJ@aol.com
To: nau88xj@hotmail.com
Sent: Wednesday, February 28, 2001 8:01 PM
Subject: Re: [az_vjc] [TR] Raw Deal (Lower) - Sunday, March 4, 2001
Perfect trail for the "maiden voyage" of the CJ...I also have a friend with a
2000 TJ with a 5 speed that has NEVER done any offroading at all...come join
us kevin!!!!
FLEXY
19588 From: Stu Olson <solson8@q...>
Date: Wed Feb 28, 2001 8:58pm
Subject: need a measurement
For anyone running the longer set of Tera QDs (DougB, Brent, whoever?), I
need the eye to eye measurements of them, please...... If you could throw
a tape measure on and give the dimension, center hole to center hole, that
would be great.
TIA......Stu
19589 From: Larry Farquhar <lfar@h...>
Date: Wed Feb 28, 2001 9:33pm
Subject: Wrenching Party!
All;
Thanks for those who have sent me Email with intent of coming to the
wrenching party this Sunday. It's making planning much easier. You're still
invited to come join us, even if you didn't/don't RSVP. Everyone is welcome
to come help, learn, watch, or .....
For those unaware of this wrenching party, I've attached the original Email
with info and directions. FYI- US60 from Hwy101 to Alma School will be
closed this Sunday.
Hope to see you Sunday! (Also looking forward to a lifted TJ!)
Larry Farquhar
From: "Larry Farquhar" lfar@h...
To: "Az_Vjc" az_vjc@yahoogroups.com
Subject: Wrenching Party on 3/4!
Date: Sat, 24 Feb 2001 20:57:00 -0700
All;
I recently asked for help installing a RE lift kit on my '01 TJ. I received
quite a few replies offering assistance, so we decided to make it a
wrenching party! You're invited to come help out, watch, learn, socialize,
and/or get advice and help. Larry Turnquist has offered to use his garage
and equipment, with Mike Baney and Mike Anderson bringing a 1/2" drill and
bits needed for the lift and track bar. Chris Krieg and Dan Weed also
offered assistance and plan to attend. I'll provide some suds, sodas, and
pizza as bribery to those attending (please drink responsible).
We'll be getting an early start next Sunday (3/4) at 8:00am at Larry T's.
Larry lives in NE Mesa, 1/2 mile north of Power and McKellips on the right
side is a street named Menlo. The fourth house in on the right side is 6845.
Two sets of gates at the street into the driveway, light brown house. If you
get lost, my cell # is 602-300-3150. Larry says there's "a little test area
right down the street from the house, it
is a requirement of the wrenching party to go climb this hill."
To help us get an idea of how many will be there, please send me an Email if
you think you'll attend. However, come on out any time during the day even
if you didn't RSVP.
Hope to see you there!
Larry Farquhar
'01 TJ (soon to be lifted!)
19590 From: David O'Boyle <davidoboyle@h...>
Date: Wed Feb 28, 2001 9:48pm
Subject: Re: Tire Pressure
31psi for 31X10.5's is my choise on road....
offroad 12 psi
Dave
__________________________________________________ _______________
Get your FREE download of MSN Explorer at http://explorer.msn.com
19591 From: <mred@m...>
Date: Wed Feb 28, 2001 10:07pm
Subject: Asking for Help
Please do your share in imoroving our image. If we each help on a
cleanup at least 3 times a year, it would improve on increasing our
number of helpers. We can use all the help we can get. We sure don't
get it from the shooter,dirt bikers quad riders, HIKERS, BIRDWATCHERS
or The GREENY TREEHUGGERS.
HI ALL........
HOPE YOU'VE ALL KEPT UP TO DATE WITH THE ASA4WDC CALENDAR AND
REMEMBERED THE CLEAN UPS SCHEDULED FOR THIS WEEKEND.
HWY 60 & MILE MARKER 201 (GOLD CANYON AREA)........ WILL BE MEETING
AT THE 201 MARKER AT 8:00 A.M. AND
PROBABLY MOVING TO THE WEST SIDE OF THIS AREA ALONG IRONWOOD ROAD.
THE HWY 60 SIDE IS BEING KEPT PRETTY CLEAN SINCE YOU ALL HELPED CLEAN
IT LAST YEAR AT THIS TIME............ THE IRONWOOD SIDE IS A MESS
BUT WE WILL BE STRESSING "SELLING STATE LAND REC PERMITS" AT THIS
SITE FOR THIS WEEKEND.
THE SYCAMORE CLEAN UP IS THE MOST NEEDED...................
8:00 A.M. AT THE SYCAMORE ENTRANCE (ACROSS THE HWY FROM THE SAGUARO
LAKE TURN OFF)........
FOR ALL THAT SIGN IN THEY WILL BE GIVING RAFFLE TICKETS OUT..
GOOD FOR DRAWINGS LATER IN THE DAY!!! LOTS OF GOODIES SO JOIN IN FOR
A COUPLE OF HOURS. IF WE ALL HELP IN KEEPING THESE AREAS CLEAN WE
WILL BE ABLE TO KEEP THEM OPEN FOR OUR USE. IF THE AGENCIES HAVE TO
START DEALING WITH "KEEPING THE AREAS CLEAN"... THEY'LL SIMPLY CLOSE
EVERYTHING DOWN.
MARK YOUR CALENDARS FOR APRIL 7...SAME PLANS.......DIFFERENT DATE!
YOU ALL "SHOWED OUR COLORS" FOR THE DYNAMITE/PIMA LAND
GRAB.................. LET'S KEEP IT UP!!!!!
THANKS, THANKS, THANKS!!!!
PLEASE PASS THIS ON TO YOUR LISTS.
19592 From: Nick Notestine <nnote@n...>
Date: Wed Feb 28, 2001 11:04pm
Subject: Re: Looking for Mud
There's a great empty dirt lot on the north east corner off elliot and
dobson I think it is. Pretty large to. Just behind the mobil. I go there
often to mud and a policeman even told me it's no problem as long as the
owner of the lot doesn't complain, who's probably out of state any ways
(qoute).
It is a good 6 to 12 inches thick after a rain, no big rocks. The people at
mobil enjoy the show...
Nick
----- Original Message -----
From: "Scott Thomas" <sthomas@a...>
To: <az_vjc@yahoogroups.com>
Sent: Wednesday, February 28, 2001 2:42 PM
Subject: [az_vjc] Looking for Mud
> Hey everyone,
> With all this rain today and begin shut up in this office all day I'm
> thinking about going out tonight and doing some muddy. Question: I'm in
> the Mesa/Tempe area and really don't want to drive a long distance, but do
> want to rump in the mud. Any suggestions on where I can go and not get in
> trouble?
>
> Thanks
> Scott Thomas
> 97' Tj
>
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
19593 From: <az_vjc@yahoogroups.com>
Date: Thu Mar 1, 2001 0:02am
Subject: Reminder - Tierra Del Sol Desert Safari
We would like to remind you of this upcoming event.
Tierra Del Sol Desert Safari
Date: Saturday, March 3, 2001
Time: All Day
39th Annual gathering near Palm Springs - over 1200 vehicles
showed up last year. Near Salton Sea. Camping, lots of prizes
and runs on Sat and Sun. For more info: http://www.tds4x4.com/
19594 From: T.J. Nosmo-King <ice626@h...>
Date: Thu Mar 1, 2001 1:18am
Subject: Re: Tire Pressure
smitty....28psi on 33's...
TJ Gill
75 CJ5
I still miss my ex-wife.....but my aim IS improving
__________________________________________________ _______________
Get your FREE download of MSN Explorer at http://explorer.msn.com
19595 From: T.J. Nosmo-King <ice626@h...>
Date: Thu Mar 1, 2001 1:27am
Subject: Re: 350 in a CJ7 motor mounts question
I just swapped in a TH350 tranny and advanced adapters recommends that I
offset it 1 inch to the driver side to correctly line up the front drive
shaft....question is: How do I do this???
TJ Gill
75 CJ5
I still miss my ex-wife.....but my aim IS improving
__________________________________________________ _______________
Get your FREE download of MSN Explorer at http://explorer.msn.com
19596 From: Bob Nyberg <r.nyberg@w...>
Date: Thu Mar 1, 2001 4:02am
Subject: Need York
Hey
I am coming up on my forced vacation from work ( week long shut down )
and am planing on getting some mods completed on the CJ. Does anyone
know where I can get the best deal on a compressor for my OBA. I have
all the brackets etc.Thanks in advance.
Bob
19572 From: Jesus Chio - Alloffroad.com <jchio@a...>
Date: Thu Mar 1, 2001 5:01pm
Subject: Re: Fw: Disk Brakes
Linda I know you have a Cherokee and a friend wants better shocks than
Rancho 9000s, do you know of any model or a source of Information I can
access to look for that?
thanks in advance
Jesus Chio
Vice-President, Offroad Image
Chief Editor, AllOffRoad.com
__________________________________________________ ______________________
Webpage and email 4 free @ http://www.alloffroad.com
Park your truck in http://rr.AllOffRoad.com
__________________________________________________ ______________________
----- Original Message -----
From: "linda luik" <minihummer@w...>
To: "azvjc" <az_vjc@yahoogroups.com>
Sent: Wednesday, February 28, 2001 5:32 PM
Subject: Re: Fw: [az_vjc] Disk Brakes
> My boyfriend did the same thing. Had the same problems. He even modified
> the backing plate to fit and then discovered that the rotors wouldn't
> fit. Period. Stainless and OffRoad UnLtd were gracious enough to take
> the modified parts back. You might check TSM for a disc brake
> conversion kit.
>
> Linda
>
> George Andrews wrote:
> >
> > I would not recommend Stainless Steel Brakes....I installed their rear
disc
> > kit. Parts they sent were wrong, service was terrible, and the kit makes
no
> > difference. If I did it over again, I'd beef up the drums.
> >
> > George Andrews
> > '83 Cherokee WT, 454TBI, TH400, QT, D44s, 35x12.50s, ARBs
> > '00 TJ
> > Avondale Arizona
> >
> > -----Original Message-----
> > From: Scott Thomas <sthomas@a...>
> > To: az_vjc@yahoogroups.com <az_vjc@yahoogroups.com>
> > Date: Tuesday, February 27, 2001 5:03 AM
> > Subject: [az_vjc] Disk Brakes
> >
> > >Hey does anyone have rear disc brakes? If so how hard and is it to
change
> > >them out on a 97 Tj? What kind of price am I looking at? What kind of
> > >performance difference is it?
> > >
> > >Thanks,
> > >Scott Thomas
> > >97 Tj
> > >
> > >
> > >
> > >
> > >Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
> > >
> > >
> >
> >
> >
> > Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
--------------------------------------------------------------------------------
ADVERTISEMENT
19573 From: Hackle <hackle@u...>
Date: Wed Feb 28, 2001 5:15pm
Subject: Re: Tire Pressure
I run 28 on the street 33x12.5x15's on an 89 YJ.
I refuse to belong to any group that would have me as a member!
19574 From: George Andrews <gandre01@m...>
Date: Wed Feb 28, 2001 5:39pm
Subject: Re: Cherokee for sale
Sounds like a cool rig...I'll post it on teh FSJ list.
George Andrews
'83 Cherokee WT, 454TBI, TH400, QT, D44s, 35x12.50s, ARBs
'00 TJ
Avondale Arizona
-----Original Message-----
From: garegb@aol.com <garegb@aol.com>
To: az_vjc@yahoogroups.com <az_vjc@yahoogroups.com>
Date: Tuesday, February 27, 2001 11:26 PM
Subject: [az_vjc] Cherokee for sale
Hey everybody
I know this is selfish of me to sell my stuff here, but it is a
jeep. I have a 1980 Cherokee Chief that I very much would enjoy getting rid
of. It has a 360(tired) 727 automatic (20k on rebuild) NP219 full time
transfer case (also 20k on rebuild w new chain), model 44 front(driver side
pumpkin) model 20 rear (one piece not the crappy cj unit) gears unknown.
fairly new 3 core radiator from modine, Aluminum 6 lug wheels, 3 inch
flowmaster single exhaust with a high flow catalytic converter, also 20k
miles, emissions equip is also fairly fresh and it did pass last summer.
Needs lots of work asking 1800$ obo. Anyone interested please call me at 602
708 1292.
Greg B. '51
Willys Panel
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
19575 From: George Andrews <gandre01@m...>
Date: Wed Feb 28, 2001 5:37pm
Subject: Fw: Disk Brakes
Yep! I've installed a new proportioning valve and master specifically
designed for discs all around...just need to get the vehicle road worthy to
test them. I still don't recommend SSBC.
George Andrews
'83 Cherokee WT, 454TBI, TH400, QT, D44s, 35x12.50s, ARBs
'00 TJ
Avondale Arizona
-----Original Message-----
From: Stu Olson <solson8@q...>
To: George Andrews <gandre01@m...>; azvjc <az_vjc@yahoogroups.com>
Date: Tuesday, February 27, 2001 7:31 PM
Subject: RE: [az_vjc] Disk Brakes
>Geroge,
>
>I had a friend of mine install a set of rear discs from Stainless Steel
>Brakes and it was not until he bypassed his proportioning valve did he get
>the performance he was expecting.
>
>He is an retired engineer and so he started calculating the hydraulic
>pressures being generated by his CJ-7 master cyclinder, the volume of the
>rear disc calipers....the hole "design thing". He found that they were
>being grossly under powered....by about 50% of what was needed. The people
>at Stainless, according to him, really didn't have a clue about what he was
>talking about (ie., poor design team...if any) when he consulted them for
>assistance.
>
>Anyway, once he got that little problem taken care of, he can now safely
>hold himself on the very steep hills in just 2WD...where before, these same
>hills would cause his vehicle to start backwards and go into a skidding
>rollover.
>
>Stu
>
>> -----Original Message-----
>> From: George Andrews [mailto:gandre01@m...]
>> Sent: Tuesday, February 27, 2001 6:54 PM
>> To: azvjc
>> Subject: Fw: [az_vjc] Disk Brakes
>>
>>
>> I would not recommend Stainless Steel Brakes....I installed their
>> rear disc
>> kit. Parts they sent were wrong, service was terrible, and the
>> kit makes no
>> difference. If I did it over again, I'd beef up the drums.
>>
>> George Andrews
>> '83 Cherokee WT, 454TBI, TH400, QT, D44s, 35x12.50s, ARBs
>> '00 TJ
>> Avondale Arizona
>>
>> -----Original Message-----
>> From: Scott Thomas <sthomas@a...>
>> To: az_vjc@yahoogroups.com <az_vjc@yahoogroups.com>
>> Date: Tuesday, February 27, 2001 5:03 AM
>> Subject: [az_vjc] Disk Brakes
>>
>>
>> >Hey does anyone have rear disc brakes? If so how hard and is it
>> to change
>> >them out on a 97 Tj? What kind of price am I looking at? What kind of
>> >performance difference is it?
>> >
>> >Thanks,
>> >Scott Thomas
>> >97 Tj
>> >
>> >
>> >
>> >
>> >Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
>> >
>> >
>>
>>
>>
>>
>>
>>
>> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>>
>>
>>
>
19576 From: <flatfenderman@a...>
Date: Wed Feb 28, 2001 0:34pm
Subject: Re: 350 in a CJ7 motor mounts question
Jesus,
It is very common to offset any motor towards the drivers side on a CJ engine
swap. Normally its done so that there is no interference between the front
diff/drive shaft at the bell housing, not to mention needed clearance for the
oil pan and differential. If your having linkage problems I would recommend
going to a set of pedals from a later model CJ7 that had a hydraulic clutch
and then finding a slave cylinder to work on your transmission. Jeeps always
seem to have problems with clutch linkage binding during extreme flex, so the
juice clutch is the way to go. I may still have a set of these pedals laying
around here from the 85 CJ7 I scraped out last year, if you want them I will
see if I can find them, if there here, I mail them to you.
Chris
19577 From: Ralph Williams <ralph@p...>
Date: Wed Feb 28, 2001 5:50pm
Subject: Re: Tucson bound
Don't know what side of town you will be on so....
I like the Timber Lodge at Ina and Thornydale. The chain (this is
the only one is AZ that I know of) is from Minnesota, they fly
all their meat from Minneapolis every other day. The prime rib is
very good and they also have Walleye. Prices are reasonable and
the wait is bearable, and noise at low levels.
Another suggestion is the Thunder Canyon Brewery at the Foothills
Mall at Ina and La Cholla. Great selection of specialty beers
brewed on the premises and good food also. A little noisy tho'.
There are two for you on the Northwest side. There are quite a
few good places here.
Would possibly be able to meet you. My wife is most likely
working those nights. (she is a nurse)
Ralph Williams
Mike Baney wrote:
>
> Hi members in the Tucson area! My wife and I are
> coming down there March 7th and 8th, I have some work
> to do down there. We are going to go out to dinner on
> the 7th, and were wondering if any members had a good
> suggestion for a resturant and to see if they wanted
> to meet for some drinks after dinner, and hang out.
> Any suggestions for dinner would be great, we like
> everything from chinese, italian, bbq, almost
> anything!
>
> Mike Baney
>
> =====
> 2001 TJ
>
> __________________________________________________
> Do You Yahoo!?
> Get email at your own domain with Yahoo! Mail.
> http://personal.mail.yahoo.com/
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
19578 From: <trmn8rjn98@a...>
Date: Wed Feb 28, 2001 5:52pm
Subject: Raw Deal with ok for TJ No lift 31" tires?
Subject says it all who has done it? Is it ok or likely to pound the
skids to heck?
John
19579 From: Greg Stapley <love24wheel@h...>
Date: Wed Feb 28, 2001 6:10pm
Subject: Re: Raw Deal with ok for TJ No lift 31" tires?
The good thing about raw deal is that you can choose what obstacles you want to tackle, unless you do upper too..But I would say you definatley could do raw deal..
Greg
>From: trmn8rjn98@aol.com
>To: az_vjc@yahoogroups.com
>Subject: [az_vjc] Raw Deal with ok for TJ No lift 31" tires?
>Date: Thu, 01 Mar 2001 01:52:17 -0000
>
>Subject says it all who has done it? Is it ok or likely to pound the
>skids to heck?
>John
>
>
>
>
>
>Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
--------------------------------------------------------------------------------
Get your FREE download of MSN Explorer at http://explorer.msn.com
19580 From: Leonard K. Pennock <leonardpennock@h...>
Date: Wed Feb 28, 2001 6:14pm
Subject: Re: Tire Pressure
32x11.50-15 on 8" rims on an XJ, 26psi.
James Smith wrote:
>
> Ok,
> Simple question..
> Maybe..
> What tire pressure does everybody run, during normal
> day to day driving around town?
>
> 31' BFG AT
> 95 yj
>
> thanks,
>
> Smitty
>
> __________________________________________________
> Do You Yahoo!?
> Get email at your own domain with Yahoo! Mail.
> http://personal.mail.yahoo.com/
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
--
Leonard K. Pennock
Those who walk bravely through life, unafraid of loss or failure,
find that they very rarely lose or fail.
19581 From: Hackle <hackle@u...>
Date: Wed Feb 28, 2001 6:17pm
Subject: Fw: Raw Deal with ok for TJ No lift 31" tires?
You are fine Raw Deal is as easy or as hard as you want it to be. Wide wash
lots of different lines great beginner run. But can be hard enough for a
challenge. Enjoy the run.
I refuse to belong to any group that would have me as a member!
> ----- Original Message -----
> From: <trmn8rjn98@a...>
> To: <az_vjc@yahoogroups.com>
> Sent: Wednesday, February 28, 2001 6:52 PM
> Subject: [az_vjc] Raw Deal with ok for TJ No lift 31" tires?
>
>
> > Subject says it all who has done it? Is it ok or likely to pound the
> > skids to heck?
> > John
> >
> >
> >
> >
> >
> > Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
> >
> >
> >
>
19582 From: <thewickers@y...>
Date: Wed Feb 28, 2001 7:23pm
Subject: Re: Tucson Bound
There is another great restaurant on the Northwest side, Lil Abners,
great steak and ribs. Quite possibly the best I've had in Tucson.
Gavis italian restaurant also in the foothills mall is also quite
good. If I am in country,(may be travelling to Chile those dates) my
wife and I love to go out to eat.
Alan
94YJ SOA Locked
Warn 8000 winch
19583 From: <JEEPER401@a...>
Date: Wed Feb 28, 2001 2:29pm
Subject: Re: Looking for AMC 360
Have a 360 builder. $150. Also have a built 401 for sale. $2000.
Steve
76 CJ5
19584 From: Roxie <Roxie@t...>
Date: Wed Feb 28, 2001 7:48pm
Subject: OT - Earthquake!
I first bought parking at the Westin Hotel for The Little Red Sled - but ended up parking my baby Jeep at Pike Market. Thank god! The Westin had a ton of problems today during our 6.8 earthquake - some cars were smashed. My baby Jeep is OK :-)
-Stacy-Michelle
TheJeepGoddess.com
"Silly Boys, Jeeps are for Girls"
19585 From: Ralph Williams <ralph@p...>
Date: Wed Feb 28, 2001 8:05pm
Subject: Re: Semi-O/T help for a fellow Jeeper (Sierra Club initiative in Phoenix Prop 301?)
Kevin, since you posted in HTML my email doesn't quote your text.
Tell your friend to go to this URL, it was Proposition 202.
http://www.sosaz.com/election/2000/Info/pubpamphlet/english/contents.htm
Hope this helps,
Ralph
19586 From: Scott Kruize <osmtj@y...>
Date: Wed Feb 28, 2001 8:05pm
Subject: Re: Tire Pressure
I run 25 PSI street on 35" MT/R's.
Scott
linda luik wrote:
32 front, 30 rear 285/75r16s
James Smith wrote:
>
> Ok,
> Simple question..
> Maybe..
> What tire pressure does everybody run, during normal
> day to day driving around town?
>
> 31' BFG AT
> 95 yj
>
> thanks,
>
> Smitty
>
> __________________________________________________
> Do You Yahoo!?
> Get email at your own domain with Yahoo! Mail.
> http://personal.mail.yahoo.com/
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
--------------------------------------------------------------------------------
Do You Yahoo!?
Yahoo! Shopping - Thousands of Stores. Millions of Products.
19587 From: Kevin <nau88xj@h...>
Date: Wed Feb 28, 2001 8:29pm
Subject: Re: [TR] Raw Deal (Lower) - Sunday, March 4, 2001
ILL BE THERE....these new BFG muds look coo on the jeep....and i might have my pair of revolvers that i ordered for the front of the CJ in before sunday if i am lucky!!! just ordered them today, but tera told me they had them in stock!
kevin
----- Original Message -----
From: FLEXYXJ@aol.com
To: nau88xj@hotmail.com
Sent: Wednesday, February 28, 2001 8:01 PM
Subject: Re: [az_vjc] [TR] Raw Deal (Lower) - Sunday, March 4, 2001
Perfect trail for the "maiden voyage" of the CJ...I also have a friend with a
2000 TJ with a 5 speed that has NEVER done any offroading at all...come join
us kevin!!!!
FLEXY
19588 From: Stu Olson <solson8@q...>
Date: Wed Feb 28, 2001 8:58pm
Subject: need a measurement
For anyone running the longer set of Tera QDs (DougB, Brent, whoever?), I
need the eye to eye measurements of them, please...... If you could throw
a tape measure on and give the dimension, center hole to center hole, that
would be great.
TIA......Stu
19589 From: Larry Farquhar <lfar@h...>
Date: Wed Feb 28, 2001 9:33pm
Subject: Wrenching Party!
All;
Thanks for those who have sent me Email with intent of coming to the
wrenching party this Sunday. It's making planning much easier. You're still
invited to come join us, even if you didn't/don't RSVP. Everyone is welcome
to come help, learn, watch, or .....
For those unaware of this wrenching party, I've attached the original Email
with info and directions. FYI- US60 from Hwy101 to Alma School will be
closed this Sunday.
Hope to see you Sunday! (Also looking forward to a lifted TJ!)
Larry Farquhar
From: "Larry Farquhar" lfar@h...
To: "Az_Vjc" az_vjc@yahoogroups.com
Subject: Wrenching Party on 3/4!
Date: Sat, 24 Feb 2001 20:57:00 -0700
All;
I recently asked for help installing a RE lift kit on my '01 TJ. I received
quite a few replies offering assistance, so we decided to make it a
wrenching party! You're invited to come help out, watch, learn, socialize,
and/or get advice and help. Larry Turnquist has offered to use his garage
and equipment, with Mike Baney and Mike Anderson bringing a 1/2" drill and
bits needed for the lift and track bar. Chris Krieg and Dan Weed also
offered assistance and plan to attend. I'll provide some suds, sodas, and
pizza as bribery to those attending (please drink responsible).
We'll be getting an early start next Sunday (3/4) at 8:00am at Larry T's.
Larry lives in NE Mesa, 1/2 mile north of Power and McKellips on the right
side is a street named Menlo. The fourth house in on the right side is 6845.
Two sets of gates at the street into the driveway, light brown house. If you
get lost, my cell # is 602-300-3150. Larry says there's "a little test area
right down the street from the house, it
is a requirement of the wrenching party to go climb this hill."
To help us get an idea of how many will be there, please send me an Email if
you think you'll attend. However, come on out any time during the day even
if you didn't RSVP.
Hope to see you there!
Larry Farquhar
'01 TJ (soon to be lifted!)
19590 From: David O'Boyle <davidoboyle@h...>
Date: Wed Feb 28, 2001 9:48pm
Subject: Re: Tire Pressure
31psi for 31X10.5's is my choise on road....
offroad 12 psi
Dave
__________________________________________________ _______________
Get your FREE download of MSN Explorer at http://explorer.msn.com
19591 From: <mred@m...>
Date: Wed Feb 28, 2001 10:07pm
Subject: Asking for Help
Please do your share in imoroving our image. If we each help on a
cleanup at least 3 times a year, it would improve on increasing our
number of helpers. We can use all the help we can get. We sure don't
get it from the shooter,dirt bikers quad riders, HIKERS, BIRDWATCHERS
or The GREENY TREEHUGGERS.
HI ALL........
HOPE YOU'VE ALL KEPT UP TO DATE WITH THE ASA4WDC CALENDAR AND
REMEMBERED THE CLEAN UPS SCHEDULED FOR THIS WEEKEND.
HWY 60 & MILE MARKER 201 (GOLD CANYON AREA)........ WILL BE MEETING
AT THE 201 MARKER AT 8:00 A.M. AND
PROBABLY MOVING TO THE WEST SIDE OF THIS AREA ALONG IRONWOOD ROAD.
THE HWY 60 SIDE IS BEING KEPT PRETTY CLEAN SINCE YOU ALL HELPED CLEAN
IT LAST YEAR AT THIS TIME............ THE IRONWOOD SIDE IS A MESS
BUT WE WILL BE STRESSING "SELLING STATE LAND REC PERMITS" AT THIS
SITE FOR THIS WEEKEND.
THE SYCAMORE CLEAN UP IS THE MOST NEEDED...................
8:00 A.M. AT THE SYCAMORE ENTRANCE (ACROSS THE HWY FROM THE SAGUARO
LAKE TURN OFF)........
FOR ALL THAT SIGN IN THEY WILL BE GIVING RAFFLE TICKETS OUT..
GOOD FOR DRAWINGS LATER IN THE DAY!!! LOTS OF GOODIES SO JOIN IN FOR
A COUPLE OF HOURS. IF WE ALL HELP IN KEEPING THESE AREAS CLEAN WE
WILL BE ABLE TO KEEP THEM OPEN FOR OUR USE. IF THE AGENCIES HAVE TO
START DEALING WITH "KEEPING THE AREAS CLEAN"... THEY'LL SIMPLY CLOSE
EVERYTHING DOWN.
MARK YOUR CALENDARS FOR APRIL 7...SAME PLANS.......DIFFERENT DATE!
YOU ALL "SHOWED OUR COLORS" FOR THE DYNAMITE/PIMA LAND
GRAB.................. LET'S KEEP IT UP!!!!!
THANKS, THANKS, THANKS!!!!
PLEASE PASS THIS ON TO YOUR LISTS.
19592 From: Nick Notestine <nnote@n...>
Date: Wed Feb 28, 2001 11:04pm
Subject: Re: Looking for Mud
There's a great empty dirt lot on the north east corner off elliot and
dobson I think it is. Pretty large to. Just behind the mobil. I go there
often to mud and a policeman even told me it's no problem as long as the
owner of the lot doesn't complain, who's probably out of state any ways
(qoute).
It is a good 6 to 12 inches thick after a rain, no big rocks. The people at
mobil enjoy the show...
Nick
----- Original Message -----
From: "Scott Thomas" <sthomas@a...>
To: <az_vjc@yahoogroups.com>
Sent: Wednesday, February 28, 2001 2:42 PM
Subject: [az_vjc] Looking for Mud
> Hey everyone,
> With all this rain today and begin shut up in this office all day I'm
> thinking about going out tonight and doing some muddy. Question: I'm in
> the Mesa/Tempe area and really don't want to drive a long distance, but do
> want to rump in the mud. Any suggestions on where I can go and not get in
> trouble?
>
> Thanks
> Scott Thomas
> 97' Tj
>
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
19593 From: <az_vjc@yahoogroups.com>
Date: Thu Mar 1, 2001 0:02am
Subject: Reminder - Tierra Del Sol Desert Safari
We would like to remind you of this upcoming event.
Tierra Del Sol Desert Safari
Date: Saturday, March 3, 2001
Time: All Day
39th Annual gathering near Palm Springs - over 1200 vehicles
showed up last year. Near Salton Sea. Camping, lots of prizes
and runs on Sat and Sun. For more info: http://www.tds4x4.com/
19594 From: T.J. Nosmo-King <ice626@h...>
Date: Thu Mar 1, 2001 1:18am
Subject: Re: Tire Pressure
smitty....28psi on 33's...
TJ Gill
75 CJ5
I still miss my ex-wife.....but my aim IS improving
__________________________________________________ _______________
Get your FREE download of MSN Explorer at http://explorer.msn.com
19595 From: T.J. Nosmo-King <ice626@h...>
Date: Thu Mar 1, 2001 1:27am
Subject: Re: 350 in a CJ7 motor mounts question
I just swapped in a TH350 tranny and advanced adapters recommends that I
offset it 1 inch to the driver side to correctly line up the front drive
shaft....question is: How do I do this???
TJ Gill
75 CJ5
I still miss my ex-wife.....but my aim IS improving
__________________________________________________ _______________
Get your FREE download of MSN Explorer at http://explorer.msn.com
19596 From: Bob Nyberg <r.nyberg@w...>
Date: Thu Mar 1, 2001 4:02am
Subject: Need York
Hey
I am coming up on my forced vacation from work ( week long shut down )
and am planing on getting some mods completed on the CJ. Does anyone
know where I can get the best deal on a compressor for my OBA. I have
all the brackets etc.Thanks in advance.
Bob