blooddrive
01-03-2004, 11:27 AM
18970-18994
18970 From: <Jeepguy@z...>
Date: Sat Feb 17, 2001 7:18am
Subject: Re: TJ JET modules ?
How bad can it be?? More power right?? As long as it's boosting the
horses, so I can whoop the riceboys!! You also might want to check
out the previous post on how to gain a lot of horsepower with the
exhaust mod.
--------------------------------------------------------------------------------
ADVERTISEMENT
18971 From: <cmandrick@h...>
Date: Sat Feb 17, 2001 7:55am
Subject: Re: Petition to Daimler-Chrysler to NOT go to independent suspension...
Maybe we could petition for D60's and an NV4500 from the factory...
Chris M.
87 YJ turd brown
> http://www.PetitionOnline.com/hds2/
>
> I personally agree with what this petition says, and I think you
might
> agree, too. If you can spare a moment, please take a look, and
consider
> signing yourself.
>
> Best wishes,
>
> Pete Wirch
18972 From: <Jeepguy@z...>
Date: Sat Feb 17, 2001 8:21am
Subject: Re: [TR] Sycamore Creek - Monday, February 19, 2001
I want to go to this run on Monday, I don't know if my Jeep will make
it. Anyone who has run it, please let me know what you think. I have
a 2" spacer lift with 30" swampers, never been out to Sycamore, but I
have done coves, broken arrow (devils staircase) and a few other
trails, I guess I'm wondering how bad a 3.5 is if you are only lifted
2" my tires are the same as 31s and I'm also discod. I am pretty good
at wheeling, so if it depends on the driver I can probably make
it. :) LOL Thanks!! -Rob
18973 From: James Towle <James.Towle@a...>
Date: Sat Feb 17, 2001 9:26am
Subject: Re: TJ JET modules ?
I guess, the answer is, get a bored throtle body and a header&cat
before going with the module. That's reasonable.
--James
--- In az_vjc@y..., Jeepguy@z... wrote:
> How bad can it be?? More power right?? As long as it's boosting the
> horses, so I can whoop the riceboys!! You also might want to check
> out the previous post on how to gain a lot of horsepower with the
> exhaust mod.
18974 From: Greg Stapley <love24wheel@h...>
Date: Sat Feb 17, 2001 9:28am
Subject: Run tomorrow table mesa area !
Not sure what run I am gonna do tomorrow, but I am camping out at table mesa and me and a couple of buddies were gonna do a run tomorrow..Me and the Zuki and another buddy with a huge YJ.. In anycase we won't do anything harder than terminator ( lower ) and nothing easier than raw deal.. Maybe do raw deal and then upper term.. Who knows.. But I would like to invite all who would like to do some 4wheeling.. Yet since I am not sure of the actual run, I will not use the azvjc trip text.. I want to meet at 9 am so hope to see some of you out there..let me know before 5 pm tonight who to expect ( if any, such short notice ) I plan on being out there at 6 pm tonight..
Late
Greg
--------------------------------------------------------------------------------
Get your FREE download of MSN Explorer at http://explorer.msn.com
18975 From: T.J. Nosmo-King <ice626@h...>
Date: Sat Feb 17, 2001 10:38am
Subject: Re: TJ JET modules ?
don't know if they're any good or not, but I see them for sale on ebay all the time.....might get one cheaper there if you decide to get one......
TJ Gill
75 CJ5
I still miss my ex-wife.....but my aim IS improving
--------------------------------------------------------------------------------
Get your FREE download of MSN Explorer at http://explorer.msn.com
18976 From: Blair <blairb20@h...>
Date: Sat Feb 17, 2001 10:51am
Subject: 4 Peaks trail questions...
I'm thinking about doing the trail that goes to 4 peaks on Sunday. What I'm
wondering is, how far up the mountain does the trail go, and how exactly
does one get there. I believe I read that you can get there via the trails
around the coves also...
-Blair
18977 From: T.J. Nosmo-King <ice626@h...>
Date: Sat Feb 17, 2001 10:53am
Subject: Re: Tranny problems
Ray...that sounds like the same guy that rebuilt mine last year.....took it to him cause it was popping out of 2nd gear.....6 weeks and 400.00 later, it not only was still popping out of 2nd but was also popping out of 4th.....which has gotten continually worse until now it pops out of 4th every couple of minutes......guess thats what I get for trying to save a few bux....I would say that this time I'll take it to an expert, but thats what I thought last time.........let me know what it took to fix yours.....and how much (if you don't mind saying).....
TJ Gill
75 CJ5
I still miss my ex-wife.....but my aim IS improving
--------------------------------------------------------------------------------
Get your FREE download of MSN Explorer at http://explorer.msn.com
18978 From: T.J. Nosmo-King <ice626@h...>
Date: Sat Feb 17, 2001 10:56am
Subject: Re: Heater
install a CJ5 heater.....cut holes in your floor boards right behind your exhaust manifolds...works great
TJ Gill
75 CJ5
I still miss my ex-wife.....but my aim IS improving
--------------------------------------------------------------------------------
Get your FREE download of MSN Explorer at http://explorer.msn.com
18979 From: Keith Orr <korr@z...>
Date: Sat Feb 17, 2001 5:36am
Subject: Hello Gang!!!
Sorry for being out of the scene for a while. I got a new computer, and I have been having FITS getting the thing to work. Hopefully, I have all the bugs worked out for now. I am looking forward to catching up on all the news. BTW, we now have another new member in my area. Its is growing slowly but surely.
Casper
18980 From: Leah & Geoff <leahlsq@q...>
Date: Sat Feb 17, 2001 0:01pm
Subject: FS: YJ Dana 35 Lock-Right-TUCSON
For Sale; 87-93 YJ Lock-Right for Dana 35
Part# 2310S
Used for 10,000 miles, looks brand new!
Everything is in the box including instuctions.
I'm asking $110.00 firm.
Please call me as I'll be off the computer the rest of the day.
546-0501 ask for Leah or Geoff.
Thanks, Leah
18981 From: <azjeeper@n...>
Date: Sat Feb 17, 2001 0:36pm
Subject: locker question???
Can anyone tell me if the carrier has to come out to put a
lockright type locker into a D35? I've been told with gears
lower than 3.73, the shaft won't come out with the ring gear
in place. I have 4.10 gears. If it does have to come out, what
do I need to know before taking it out and putting it back?
TIA
Steve 94YJ
18982 From: Leonard K. Pennock <leonardpennock@h...>
Date: Sat Feb 17, 2001 2:18pm
Subject: Re: locker question???
azjeeper@n... wrote:
>
> Can anyone tell me if the carrier has to come out to put a
> lockright type locker into a D35? I've been told with gears
> lower than 3.73, the shaft won't come out with the ring gear
> in place. I have 4.10 gears. If it does have to come out, what
> do I need to know before taking it out and putting it back?
>
> TIA
> Steve 94YJ
With a D35 the shims are on the outside of the bearings so make sure you
mark which side the shims and bearing races go on so you can put them
back in the same position.
--
Leonard K. Pennock
Those who walk bravely through life, unafraid of loss or failure,
find that they very rarely lose or fail.
18983 From: <ice626@h...>
Date: Sat Feb 17, 2001 2:52pm
Subject: Tranny Question
Hi all.....just dropped the tranny/tc to get it ready for the shop
and was wondering if it would be better to remove the t/c from the
adapter and leave tranny/adapter to the shop guys or remove the t/c
and adapter as a unit????.....this is the first time I've pulled one
by my lonesome and just wondered what the easiest/best way to do it
was.....it looks easier to disconnect the t/c and leave the adapter
since part of the linkage is connected to the adapter....thoughts,
ladies and gentlemen???????
thanx in advance
T.J. Gill
75 trannyless CJ5
18984 From: David Smith <dwsmith69@h...>
Date: Sat Feb 17, 2001 3:43pm
Subject: Member Sighting
Crismon & Mckellips Tan Cheroke Lifted at 10am(Must been out Hiking) Who Are
Ya?
__________________________________________________ _______________
Get your FREE download of MSN Explorer at http://explorer.msn.com
18985 From: <sharxjeep@c...>
Date: Sat Feb 17, 2001 11:39am
Subject: My new cage
Hey everyone,
I just loaded some pics of my soon to be complete 6 point cage that "ROC RAT
ARMOR" is building for me. You can see the pics at
www.sharxjeep.alloffroad.com
I cant wait to get back on the trail!
See ya soon,
Sharky
18986 From: Ross Skinner <rskinner@s...>
Date: Sat Feb 17, 2001 5:18pm
Subject: Run tomorrow- Table Mesa
Deb and I will be at the leaving parking lot tomorrow at 10 am or so to go
run either both Terminators or Predator. Anyone who wants to come is
welcome.
Ross & Deb and crew..
18987 From: <gev39@y...>
Date: Sat Feb 17, 2001 7:04pm
Subject: Photos of Upper Woodpecker 2-17-01
Hello!
You are invited to view an online photo album created by Russell Gevarter, Blue YJ Renegade.
http://albums.photopoint.com/j/AlbumIndex?u=1344512&a=11625625
Here is a message describing the photos:
UpperWoodPecker mine trail run on 2-17-01
Attendees:
Rick and Vanda Norman: White Cherokee,
Dan Coley: Green Wrangler, Tara Poros: Yellow Wrangler,
Russell & Mary Gevarter: Blue Renegade
You can order prints of the pictures while you are viewing
them.
You can also create your own photo album to share with family and
friends. Its free! Just join PhotoPoint today.
http://www.photopoint.com/signup.html
AOL Users:
Click on the link below to see the photos. If neither of the
links are clickable, simply cut and paste the first link into
your web browser.
<A HREF="http://albums.photopoint.com/j/AlbumIndex?u=1344512&a=11625625">Click Here</A>
Here are some of the exciting things you can do as a member of
PhotoPoint:
- Order prints of your favorite shots through our PersonalPrints
service for yourself or family and friends.
http://store.photopoint.com/ppstore
- Share your photos and photo albums online with family and
friends. It's a great way to stay in touch with loved ones.
- Create real movies with your pictures to enjoy and share.
http://www.photopoint.com/moviemaker/index.html
- Enjoy great deals on the latest technology in digital cameras,
scanners and more at the Wolf Camera Store.
http://photopoint.wolfcamera.com
And that's just the beginning.
Celebrate Your Life In Pictures(TM) at PhotoPoint today.
http://www.photopoint.com
18988 From: Chris Krieg <rv6a@m...>
Date: Sat Feb 17, 2001 7:11pm
Subject: Where to buy welders?
Where is the best place (best prices) in the east valley to buy welders? I'm
looking for a MIG with gas.
Chris K
18989 From: Jesus Chio - Alloffroad.com <jchio@a...>
Date: Sat Feb 17, 2001 7:13pm
Subject: RE: Where to buy welders?
I bought a millermatic 185 and its the best you can get =)
I paid $1030 shipped to my door. I just spent the whole day welding and
cutting with the plasma in the garage. Using C02, man Its the first time I
weld and it was sooo easy!!
I have a guy who sell the cheapest in market, if interested email me in a
few days and ill reply from the office puter,
thanks
Jesus Chio
Home account
Chief Editor : www.alloffroad.com
-----Mensaje original-----
De: Chris Krieg <rv6a@m...>
Para: Virtual Jeep Club <az_vjc@yahoogroups.com>
Fecha: Sábado, 17 de Febrero de 2001 10:07 p.m.
Asunto: [az_vjc] Where to buy welders?
>Where is the best place (best prices) in the east valley to buy welders?
I'm
>looking for a MIG with gas.
>
>Chris K
>
>
>
>
18990 From: DougB <azjeep@h...>
Date: Sat Feb 17, 2001 7:24pm
Subject: Re: 4 Peaks trail questions...
It goes up and over the Mazatzal range and drops down into Tonto Basin.
There's also a nice one way ridge rd that heads north from Lone Pine Saddle.
Doug
----- Original Message -----
From: "Blair" <blairb20@h...>
To: <az_vjc@yahoogroups.com>
Sent: Saturday, February 17, 2001 11:51 AM
Subject: [az_vjc] 4 Peaks trail questions...
> I'm thinking about doing the trail that goes to 4 peaks on Sunday. What
I'm
> wondering is, how far up the mountain does the trail go, and how exactly
> does one get there. I believe I read that you can get there via the trails
> around the coves also...
>
> -Blair
>
>
>
>
18991 From: Chris Krieg <rv6a@m...>
Date: Sat Feb 17, 2001 7:42pm
Subject: Wheel size question
Are there any downsides to running 16" wheels vs 15" wheels?
Chris
18992 From: Pete Wirch <wirch@m...>
Date: Sat Feb 17, 2001 8:47pm
Subject: RE: Where to buy welders?
I just got a Millermatic Challenger 172. It's a 220V, 170amp gas mig. I
have it set up for argon/co2 mix. If you want to swing by and check it out
you can since I'm only a few miles from you. You can buy it at Phoenix
Welding Supply (Mesa & Baseline) for $639 and that is the absolute best
price you will find. It lists for $777. I got a 122 cu ft gas tank and it
was $140 and $40 to fill it. It is a very powerful welder and I plan on
using it for fab work. Let me know if you want to check it out. Oh yeah,
it comes with the regulator (worth $64 and hose).
Pete
-----Original Message-----
From: Chris Krieg [mailto:rv6a@m...]
Sent: Saturday, February 17, 2001 8:11 PM
To: Virtual Jeep Club
Subject: [az_vjc] Where to buy welders?
Where is the best place (best prices) in the east valley to buy welders? I'm
looking for a MIG with gas.
Chris K
18993 From: Russell Gevarter <gev39@y...>
Date: Sat Feb 17, 2001 8:51pm
Subject: Re: Wheel size question
16" tires have less sidewall than 15" tires of the same outside
diameter, and they cost more. But they probably perform better on the
street than tires with big sidewalls.
For offroading, I'd rather have the extra cushion of the 15's.
Russ
Chris Krieg wrote:
> Are there any downsides to running 16" wheels vs 15" wheels?
>
> Chris
__________________________________________________ _______
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com
18994 From: Scott Kruize <osmtj@y...>
Date: Sat Feb 17, 2001 11:18pm
Subject: Re: Hello Gang!!!
So when are you planning some runs for a weekend so you can show us some of the wheeling down your way?
Scott
Keith Orr wrote:
Sorry for being out of the scene for a while. I got a new computer, and I have been having FITS getting the thing to work. Hopefully, I have all the bugs worked out for now. I am looking forward to catching up on all the news. BTW, we now have another new member in my area. Its is growing slowly but surely.
Casper
--------------------------------------------------------------------------------
Do You Yahoo!?
- Get personalized email addresses from Yahoo! Mail Personal Address - only $35 a year!
18970 From: <Jeepguy@z...>
Date: Sat Feb 17, 2001 7:18am
Subject: Re: TJ JET modules ?
How bad can it be?? More power right?? As long as it's boosting the
horses, so I can whoop the riceboys!! You also might want to check
out the previous post on how to gain a lot of horsepower with the
exhaust mod.
--------------------------------------------------------------------------------
ADVERTISEMENT
18971 From: <cmandrick@h...>
Date: Sat Feb 17, 2001 7:55am
Subject: Re: Petition to Daimler-Chrysler to NOT go to independent suspension...
Maybe we could petition for D60's and an NV4500 from the factory...
Chris M.
87 YJ turd brown
> http://www.PetitionOnline.com/hds2/
>
> I personally agree with what this petition says, and I think you
might
> agree, too. If you can spare a moment, please take a look, and
consider
> signing yourself.
>
> Best wishes,
>
> Pete Wirch
18972 From: <Jeepguy@z...>
Date: Sat Feb 17, 2001 8:21am
Subject: Re: [TR] Sycamore Creek - Monday, February 19, 2001
I want to go to this run on Monday, I don't know if my Jeep will make
it. Anyone who has run it, please let me know what you think. I have
a 2" spacer lift with 30" swampers, never been out to Sycamore, but I
have done coves, broken arrow (devils staircase) and a few other
trails, I guess I'm wondering how bad a 3.5 is if you are only lifted
2" my tires are the same as 31s and I'm also discod. I am pretty good
at wheeling, so if it depends on the driver I can probably make
it. :) LOL Thanks!! -Rob
18973 From: James Towle <James.Towle@a...>
Date: Sat Feb 17, 2001 9:26am
Subject: Re: TJ JET modules ?
I guess, the answer is, get a bored throtle body and a header&cat
before going with the module. That's reasonable.
--James
--- In az_vjc@y..., Jeepguy@z... wrote:
> How bad can it be?? More power right?? As long as it's boosting the
> horses, so I can whoop the riceboys!! You also might want to check
> out the previous post on how to gain a lot of horsepower with the
> exhaust mod.
18974 From: Greg Stapley <love24wheel@h...>
Date: Sat Feb 17, 2001 9:28am
Subject: Run tomorrow table mesa area !
Not sure what run I am gonna do tomorrow, but I am camping out at table mesa and me and a couple of buddies were gonna do a run tomorrow..Me and the Zuki and another buddy with a huge YJ.. In anycase we won't do anything harder than terminator ( lower ) and nothing easier than raw deal.. Maybe do raw deal and then upper term.. Who knows.. But I would like to invite all who would like to do some 4wheeling.. Yet since I am not sure of the actual run, I will not use the azvjc trip text.. I want to meet at 9 am so hope to see some of you out there..let me know before 5 pm tonight who to expect ( if any, such short notice ) I plan on being out there at 6 pm tonight..
Late
Greg
--------------------------------------------------------------------------------
Get your FREE download of MSN Explorer at http://explorer.msn.com
18975 From: T.J. Nosmo-King <ice626@h...>
Date: Sat Feb 17, 2001 10:38am
Subject: Re: TJ JET modules ?
don't know if they're any good or not, but I see them for sale on ebay all the time.....might get one cheaper there if you decide to get one......
TJ Gill
75 CJ5
I still miss my ex-wife.....but my aim IS improving
--------------------------------------------------------------------------------
Get your FREE download of MSN Explorer at http://explorer.msn.com
18976 From: Blair <blairb20@h...>
Date: Sat Feb 17, 2001 10:51am
Subject: 4 Peaks trail questions...
I'm thinking about doing the trail that goes to 4 peaks on Sunday. What I'm
wondering is, how far up the mountain does the trail go, and how exactly
does one get there. I believe I read that you can get there via the trails
around the coves also...
-Blair
18977 From: T.J. Nosmo-King <ice626@h...>
Date: Sat Feb 17, 2001 10:53am
Subject: Re: Tranny problems
Ray...that sounds like the same guy that rebuilt mine last year.....took it to him cause it was popping out of 2nd gear.....6 weeks and 400.00 later, it not only was still popping out of 2nd but was also popping out of 4th.....which has gotten continually worse until now it pops out of 4th every couple of minutes......guess thats what I get for trying to save a few bux....I would say that this time I'll take it to an expert, but thats what I thought last time.........let me know what it took to fix yours.....and how much (if you don't mind saying).....
TJ Gill
75 CJ5
I still miss my ex-wife.....but my aim IS improving
--------------------------------------------------------------------------------
Get your FREE download of MSN Explorer at http://explorer.msn.com
18978 From: T.J. Nosmo-King <ice626@h...>
Date: Sat Feb 17, 2001 10:56am
Subject: Re: Heater
install a CJ5 heater.....cut holes in your floor boards right behind your exhaust manifolds...works great
TJ Gill
75 CJ5
I still miss my ex-wife.....but my aim IS improving
--------------------------------------------------------------------------------
Get your FREE download of MSN Explorer at http://explorer.msn.com
18979 From: Keith Orr <korr@z...>
Date: Sat Feb 17, 2001 5:36am
Subject: Hello Gang!!!
Sorry for being out of the scene for a while. I got a new computer, and I have been having FITS getting the thing to work. Hopefully, I have all the bugs worked out for now. I am looking forward to catching up on all the news. BTW, we now have another new member in my area. Its is growing slowly but surely.
Casper
18980 From: Leah & Geoff <leahlsq@q...>
Date: Sat Feb 17, 2001 0:01pm
Subject: FS: YJ Dana 35 Lock-Right-TUCSON
For Sale; 87-93 YJ Lock-Right for Dana 35
Part# 2310S
Used for 10,000 miles, looks brand new!
Everything is in the box including instuctions.
I'm asking $110.00 firm.
Please call me as I'll be off the computer the rest of the day.
546-0501 ask for Leah or Geoff.
Thanks, Leah
18981 From: <azjeeper@n...>
Date: Sat Feb 17, 2001 0:36pm
Subject: locker question???
Can anyone tell me if the carrier has to come out to put a
lockright type locker into a D35? I've been told with gears
lower than 3.73, the shaft won't come out with the ring gear
in place. I have 4.10 gears. If it does have to come out, what
do I need to know before taking it out and putting it back?
TIA
Steve 94YJ
18982 From: Leonard K. Pennock <leonardpennock@h...>
Date: Sat Feb 17, 2001 2:18pm
Subject: Re: locker question???
azjeeper@n... wrote:
>
> Can anyone tell me if the carrier has to come out to put a
> lockright type locker into a D35? I've been told with gears
> lower than 3.73, the shaft won't come out with the ring gear
> in place. I have 4.10 gears. If it does have to come out, what
> do I need to know before taking it out and putting it back?
>
> TIA
> Steve 94YJ
With a D35 the shims are on the outside of the bearings so make sure you
mark which side the shims and bearing races go on so you can put them
back in the same position.
--
Leonard K. Pennock
Those who walk bravely through life, unafraid of loss or failure,
find that they very rarely lose or fail.
18983 From: <ice626@h...>
Date: Sat Feb 17, 2001 2:52pm
Subject: Tranny Question
Hi all.....just dropped the tranny/tc to get it ready for the shop
and was wondering if it would be better to remove the t/c from the
adapter and leave tranny/adapter to the shop guys or remove the t/c
and adapter as a unit????.....this is the first time I've pulled one
by my lonesome and just wondered what the easiest/best way to do it
was.....it looks easier to disconnect the t/c and leave the adapter
since part of the linkage is connected to the adapter....thoughts,
ladies and gentlemen???????
thanx in advance
T.J. Gill
75 trannyless CJ5
18984 From: David Smith <dwsmith69@h...>
Date: Sat Feb 17, 2001 3:43pm
Subject: Member Sighting
Crismon & Mckellips Tan Cheroke Lifted at 10am(Must been out Hiking) Who Are
Ya?
__________________________________________________ _______________
Get your FREE download of MSN Explorer at http://explorer.msn.com
18985 From: <sharxjeep@c...>
Date: Sat Feb 17, 2001 11:39am
Subject: My new cage
Hey everyone,
I just loaded some pics of my soon to be complete 6 point cage that "ROC RAT
ARMOR" is building for me. You can see the pics at
www.sharxjeep.alloffroad.com
I cant wait to get back on the trail!
See ya soon,
Sharky
18986 From: Ross Skinner <rskinner@s...>
Date: Sat Feb 17, 2001 5:18pm
Subject: Run tomorrow- Table Mesa
Deb and I will be at the leaving parking lot tomorrow at 10 am or so to go
run either both Terminators or Predator. Anyone who wants to come is
welcome.
Ross & Deb and crew..
18987 From: <gev39@y...>
Date: Sat Feb 17, 2001 7:04pm
Subject: Photos of Upper Woodpecker 2-17-01
Hello!
You are invited to view an online photo album created by Russell Gevarter, Blue YJ Renegade.
http://albums.photopoint.com/j/AlbumIndex?u=1344512&a=11625625
Here is a message describing the photos:
UpperWoodPecker mine trail run on 2-17-01
Attendees:
Rick and Vanda Norman: White Cherokee,
Dan Coley: Green Wrangler, Tara Poros: Yellow Wrangler,
Russell & Mary Gevarter: Blue Renegade
You can order prints of the pictures while you are viewing
them.
You can also create your own photo album to share with family and
friends. Its free! Just join PhotoPoint today.
http://www.photopoint.com/signup.html
AOL Users:
Click on the link below to see the photos. If neither of the
links are clickable, simply cut and paste the first link into
your web browser.
<A HREF="http://albums.photopoint.com/j/AlbumIndex?u=1344512&a=11625625">Click Here</A>
Here are some of the exciting things you can do as a member of
PhotoPoint:
- Order prints of your favorite shots through our PersonalPrints
service for yourself or family and friends.
http://store.photopoint.com/ppstore
- Share your photos and photo albums online with family and
friends. It's a great way to stay in touch with loved ones.
- Create real movies with your pictures to enjoy and share.
http://www.photopoint.com/moviemaker/index.html
- Enjoy great deals on the latest technology in digital cameras,
scanners and more at the Wolf Camera Store.
http://photopoint.wolfcamera.com
And that's just the beginning.
Celebrate Your Life In Pictures(TM) at PhotoPoint today.
http://www.photopoint.com
18988 From: Chris Krieg <rv6a@m...>
Date: Sat Feb 17, 2001 7:11pm
Subject: Where to buy welders?
Where is the best place (best prices) in the east valley to buy welders? I'm
looking for a MIG with gas.
Chris K
18989 From: Jesus Chio - Alloffroad.com <jchio@a...>
Date: Sat Feb 17, 2001 7:13pm
Subject: RE: Where to buy welders?
I bought a millermatic 185 and its the best you can get =)
I paid $1030 shipped to my door. I just spent the whole day welding and
cutting with the plasma in the garage. Using C02, man Its the first time I
weld and it was sooo easy!!
I have a guy who sell the cheapest in market, if interested email me in a
few days and ill reply from the office puter,
thanks
Jesus Chio
Home account
Chief Editor : www.alloffroad.com
-----Mensaje original-----
De: Chris Krieg <rv6a@m...>
Para: Virtual Jeep Club <az_vjc@yahoogroups.com>
Fecha: Sábado, 17 de Febrero de 2001 10:07 p.m.
Asunto: [az_vjc] Where to buy welders?
>Where is the best place (best prices) in the east valley to buy welders?
I'm
>looking for a MIG with gas.
>
>Chris K
>
>
>
>
18990 From: DougB <azjeep@h...>
Date: Sat Feb 17, 2001 7:24pm
Subject: Re: 4 Peaks trail questions...
It goes up and over the Mazatzal range and drops down into Tonto Basin.
There's also a nice one way ridge rd that heads north from Lone Pine Saddle.
Doug
----- Original Message -----
From: "Blair" <blairb20@h...>
To: <az_vjc@yahoogroups.com>
Sent: Saturday, February 17, 2001 11:51 AM
Subject: [az_vjc] 4 Peaks trail questions...
> I'm thinking about doing the trail that goes to 4 peaks on Sunday. What
I'm
> wondering is, how far up the mountain does the trail go, and how exactly
> does one get there. I believe I read that you can get there via the trails
> around the coves also...
>
> -Blair
>
>
>
>
18991 From: Chris Krieg <rv6a@m...>
Date: Sat Feb 17, 2001 7:42pm
Subject: Wheel size question
Are there any downsides to running 16" wheels vs 15" wheels?
Chris
18992 From: Pete Wirch <wirch@m...>
Date: Sat Feb 17, 2001 8:47pm
Subject: RE: Where to buy welders?
I just got a Millermatic Challenger 172. It's a 220V, 170amp gas mig. I
have it set up for argon/co2 mix. If you want to swing by and check it out
you can since I'm only a few miles from you. You can buy it at Phoenix
Welding Supply (Mesa & Baseline) for $639 and that is the absolute best
price you will find. It lists for $777. I got a 122 cu ft gas tank and it
was $140 and $40 to fill it. It is a very powerful welder and I plan on
using it for fab work. Let me know if you want to check it out. Oh yeah,
it comes with the regulator (worth $64 and hose).
Pete
-----Original Message-----
From: Chris Krieg [mailto:rv6a@m...]
Sent: Saturday, February 17, 2001 8:11 PM
To: Virtual Jeep Club
Subject: [az_vjc] Where to buy welders?
Where is the best place (best prices) in the east valley to buy welders? I'm
looking for a MIG with gas.
Chris K
18993 From: Russell Gevarter <gev39@y...>
Date: Sat Feb 17, 2001 8:51pm
Subject: Re: Wheel size question
16" tires have less sidewall than 15" tires of the same outside
diameter, and they cost more. But they probably perform better on the
street than tires with big sidewalls.
For offroading, I'd rather have the extra cushion of the 15's.
Russ
Chris Krieg wrote:
> Are there any downsides to running 16" wheels vs 15" wheels?
>
> Chris
__________________________________________________ _______
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com
18994 From: Scott Kruize <osmtj@y...>
Date: Sat Feb 17, 2001 11:18pm
Subject: Re: Hello Gang!!!
So when are you planning some runs for a weekend so you can show us some of the wheeling down your way?
Scott
Keith Orr wrote:
Sorry for being out of the scene for a while. I got a new computer, and I have been having FITS getting the thing to work. Hopefully, I have all the bugs worked out for now. I am looking forward to catching up on all the news. BTW, we now have another new member in my area. Its is growing slowly but surely.
Casper
--------------------------------------------------------------------------------
Do You Yahoo!?
- Get personalized email addresses from Yahoo! Mail Personal Address - only $35 a year!